Metal Films Research Articles

Vertically Stacked Broadband GNIF‐MoS2/p‐Ge Photodetector for Dark Current Suppression, High Photoresponse, and Ultrafast Transient Response

AbstractThe proposed model structure, featuring a gold (Au) nano‐island film (GNIF) integrated with a vertically stacked van der Waals heterojunction and offering an elegant platform for high‐performance, efficient, and sensitive photodetection across a broad spectral range, is designated as GNIF‐MoS₂/p‐Ge(MoS2 = Molybdenum disulfide, p‐Ge = p type germanium). The GNIF is fabricated via ultrathin film deposition, based on the surface dewetting properties of MoS2. The as‐fabricated photodetector (PD), offering ≈20 times reduction in dark current and characterized by wavelength‐dependent high responsivity (R(λ)), photoconductive gain (G(λ)), and detectivity (D(λ)), respond to a broad spectral range from visible light (400 nm) to short wave infrared (SWIR) (1600 nm). The ultrahigh transient response (τr) is found to be ≈2.5 and 16 µs for the 470 (visible light) and 1550 (SWIR) nm wavelengths, respectively, resulting in 3‐dB bandwidths of up to ≈48 kHz, which is considered high for such devices. To understand the inherent mechanisms of broadband detection and the high photoresponse and ultrafast transient response of PDs, a meticulous investigation is conducted on the wavelength‐dependent behaviors, depletion width changes, and material properties. The results provide valuable insights and a basis for the construction of suitable PDs based on nanometer‐thin metal films, 2D semiconductors, and a 3D hybrid structure.

Influence of the reactive gas mixture on the superconducting properties of nitrogen-doped aluminum thin films

We present a correlation between disorder and superconducting properties in nitrogen-doped aluminum thin films, ranging from a few nitrogen impurities to the insulating limit due to AlN formation. Samples were deposited via reactive sputtering on (100) silicon substrates with native oxide at room temperature. Our findings show that adding nitrogen increases the superconducting critical temperature (Tc) compared to pure metal films. By varying the nitrogen/argon ratio up to 6 %, we observed a dome-like Tc behavior: 2 K at low concentrations, peaking at 3.3 K at intermediate concentrations, and then dropping as the samples become insulating (≈ 4.4 %). Increasing nitrogen raises resistivity and shifts the material from metallic to semiconductor-like behavior. Disorder impacts the upper critical field, starting at 0.2 T for low nitrogen content and reaching up to 3.2 T for nitrogen-rich samples with Tc = 2.2 K. Current-voltage curves reveal typical vortex dissipation, as expected for type II superconductors.

The Anomalous Skin Effect in Metallic Films

The Anomalous Skin Effect in Metallic Films

Assessment of ply thickness and aluminum foils interleaving on the impact response of CFRP composites designed for cryogenic pressure vessels

Carbon fiber reinforced polymer (CFRP) proved to be the best choice to produce cryogenic pressure vessels coupling a reduced weight with superior mechanical performance. Despite this, CFRPs are prone to fuel leakage due to interconnected matrix cracks resulting from mechanical and thermal stresses. Two strategies were combined in this work to reduce fuel permeability, i.e., increase of plies number and metallic film interleaving, evaluating the cryogenic impact response of these new configurations. At first, the only ply thickness effect was assessed and the hybrid sandwich-like (SL) configuration with traditional CFRP (RC) skins and a thin-ply (TP) core displayed impact and residual flexural properties close to RC ones. Then, the effect of aluminum foils interleaving was investigated, and the interleaved SL configuration displayed higher residual flexural properties than interleaved RC for all temperatures, e.g., the residual flexural strength was 30.3 % higher at room temperature and 14.6 % higher at −70 °C, respectively.

Surface plasmon polariton excitation and propagation in metal tripod systems

Through the activation of a planar gaseous medium consisting of four-level tripod atoms, our approach provides a mechanism to generate the Surface Plasmon Polariton (SPP). We investigate a three-layer structure in which the bottom layer is composed of atoms arranged in a tripod configuration, a metal film is layered in the middle, and a transparent layer of either air or vacuum resides on top. The bottom layer facilitates SPP excitation via amplification in the atom arrangement, caused by three laser beams: control, weak probe, and signal. The electromagnetically induced transparency effect, which can be seen in atoms, compensates for the momentum difference between light and SPP. We can coherently change SPP propagation length by altering control field strength, resonance, and off-resonant detuning. SPP optical gain power, propagation length, penetration depth, and metal thickness effects are also examined. Our method to generate SPPs may find use in lithography, sensors, polarizers, along with photodetectors.

Integrated Amorphous Carbon Film Temperature Sensor with Silicon Accelerometer into MEMS Sensor.

Amorphous carbon (a-C) has promising potential for temperature sensing due to its outstanding properties. In this work, an a-C thin film temperature sensor integrated with the MEMS silicon accelerometer was proposed, and a-C film was deposited on the fixed frame of the accelerometer chip. The a-C film was deposited by DC magnetron sputtering and linear ion beam, respectively. The nanostructures of two types of films were observed by SEM and TEM. The cluster size of sp2 was analyzed by Raman, and the content of sp2 and sp3 of the carbon film was analyzed by XPS. It showed that the DC-sputtered amorphous carbon film, which had a higher sp2 content, had better temperature-sensitive properties. Then, an integrated sensor chip was designed, and the structure of the accelerometer was simulated and optimized to determine the final sizes. The temperature sensor module had a sensitivity of 1.62 mV/°C at the input voltage of 5 V with a linearity of 0.9958 in the temperature range of 20~150 °C. The sensitivity of the sensor is slightly higher than that of traditional metal film temperature sensors. The accelerometer module had a sensitivity of 1.4 mV/g/5 V, a nonlinearity of 0.38%, a repeatability of 1.56%, a total thermomechanical noise of 509 μg over the range of 1 to 20 Hz, and an average thermomechanical noise density of 116 µg/√Hz, which is smaller than the input acceleration amplitude for testing sensitivity. Under different temperatures, the performance of the accelerometer was tested. This research provided significant insights into the convenient procedure to develop a high-performance, economical temperature-accelerometer-integrated MEMS sensor.

Achieving a comparable transverse magneto-optical Kerr effect by spin–orbit field driven magnetoplasmonic

In this study, we propose and simulate a magnetoplasmonics heterostructure that utilizes spin–orbit fields to generate an internal magnetic field and create a significant magneto-optical effect. Our approach offers a new way to overcome the challenges of using permanent magnets or magnetic coils in conventional magnetoplasmonics, such as high-power consumption and non-scalability. We demonstrate that it is possible to create an appropriate amount of magnetic field using spin–orbit fields induced by the spin-Hall effect, such that the consumption power becomes reasonable and the dimensions could be miniaturized. This approach will be an important development in the field of magneto-optics, as it can lead to enhanced transverse magneto-optical Kerr effect in the present of surface plasmon polaritons. The proposed nanostructure consists of a ferromagnetic film adjacent to a heavy metal layer, both sandwiched between two noble metal films, and deposited on a dielectric prism. The strength of the Kerr signal strongly depends on the thickness of the ferromagnetic layer, with the maximum effect observed at a thickness of 5nm. This concept has potential for various nanophotonic and spintronic applications, particularly for developing high-speed active plasmonic devices for ultrafast light modulation.

Motional Resistance as Highly Selective Descriptor to Probe Dynamic Formation of Surface Films on Zinc Anode

AbstractZinc anodes are expected as a promising alternative to lithium‐based anodes in energy storage systems due to their low cost, high theoretical capacity, and environmental friendliness. However, the development of efficient and stable zinc anode requires a fundamental understanding of the interfacial processes occurring during zinc deposition and dissolution cycling. In this study, we employed electrochemical quartz crystal microbalance (EQCM) analysis to investigate the potential‐dependent formation and decomposition of surface films on zinc metal anodes in sulfate‐based aqueous electrolytes. Changes in frequency and motional resistance served as complementary descriptors, with motional resistance being a highly selective indicator for probing dynamic surface film formation driven by side reactions at the zinc anode. While the frequency change provided the overall changes in the mass of both zinc metal and surface films, changes in the motional resistance selectively reflected the amount and nature of the visco‐elastic interface that comprise the surface films. The two descriptors provide quantitative and complementary means to discover the complex interfacial processes such as the formation of surface visco‐elastic films, guiding to the development of more stable and efficient zinc‐based electrochemical systems.

Transmission anomalies in 2D photonic crystals from the checkerboard family: from broken to hidden symmetries and plasmon “spoofing”

In a field representation, the main symmetry of the electromagnetic response of complementary metal film structures is described by the Babinet principle, which is expected to be strictly obeyed by structures in vanishingly thin films of a perfect electric conductor. On the other hand, a softer version of this based on transmittance, the transmittance Babinet principle (TBP), is not so restrictive. The goal of this work is to study how severely this broken symmetry affects the optical response of such structures. We consider two geometrically distinct series of planar complementary structures from the checkerboard family: regular and bowtie. The self-complementary structure of these series is known to be very singular and breaks even the rigorous Babinet principle. Here, we study complete simulated transmittance spectral maps (T-Maps), which accumulate the whole spectral response of an entire series of structures in a single plot. The ab initio simulated T-Maps of these 2D photonic crystals were simulated for linearly polarized waves propagating perpendicular to these planar structures, made in a vanishingly thin film of a perfect electric conductor. While we confirm the expected long wavelength validity of the TBP, we show that in the frequency range where diffraction effects dominate, the standard derivation of the TBP no longer applies, and with the help of our T-Maps, we demonstrate a total collapse of the TBP in the structures considered. We show that this broken symmetry practically eliminates all but one transmission band on the hole side of the T-Maps and that the remaining strong band is a “spoof” plasmon, free of multiple frequency replicas, an important feature for optical filter applications. In addition, by symmetry arguments and simulations, we discovered that the T-Maps for bowtie and doubled-period regular structures are identical. We discuss how this hidden symmetry can benefit various applications by providing a convenient scaling, whereby simplified structures can deliver a tailored response.

Single-coated thick superconducting films for metal–organic deposition using trifluoroacetates

Metal-organic deposition using trifluoroacetates (TFA-MOD) is known to yield uniform superconducting wires by a liquid growth mode. However, it has been difficult to prepare thick films because of drying stress during the calcining process. To avoid the drying stress, conventional crack-preventing chemicals such as H(CH2)8COOH are applied in conventional metal–organic deposition. However, large amounts of hydrogen atoms react with fluorine atoms during calcining process in TFA-MOD, and the consequent increased harmful carbon residue decreases superconductivity of the resulting films. To avoid the chemical reaction, new crack-preventing chemicals such as H(CF2)8COOH were applied to prepare single-coated thick films. A low ratio of hydrogen atoms decreases the chemical reaction and generates hydrogen fluorine gas, consequently suppressing the carbon residue. Above the calcining temperature, the crack-preventing chemical is decomposed into low-boiling-point chemicals such as CF2CF2 or CF3CF3. Consequently, single-coated thick film having low carbon residue and sufficient superconducting current per width was realized. For a long time, the authors have studied other possible candidate crack-preventing chemicals. Newly introduced fluorine ion measurement of decomposed materials during the calcining process revealed the nature of the crack-preventing chemicals. Based on the accumulated results, we have concluded that among over one million chemicals there are only two groups suitable for preparing single-coated thick superconducting films by TFA-MOD. One group is hydrogenated perfluoro-carboxylic acids such as H(CF2)8COOH and the other group is perfluoro di-carboxylic acids. With H(CF2)8COOH, using a single-coating process we were able to achieve a 560 nm-thick YBa2Cu3O6.93 film having Jc of 4.70 MA/cm2 (77 K,0T). Compared with a standard 150 nm-thick YBa2Cu3O6.93 film having Jc of 7.70 MA/cm2 (77 K,0T), the critical current per width is improved to about 227 %.

Robust van der Waals Metal Mask for Residue‐Free and All‐Solid 2D Material Engineering

AbstractThe van der Waals (vdW) contact, characterized by its bondless interactions, opens up exciting possibilities in cutting‐edge mask technology. It enables incredibly close proximity to samples at the atomic level while facilitating non‐destructive engineering. In this study, the concept of a vdW metal mask using the template striped ultra‐flat Ag/Au film is introduced. The probe tip‐assisted metal film transfer under an optical microscope is employed to showcase all‐solid and residue‐free engineering on 2D materials. The robust nature of the vdW metal mask allows for various treatments, including gas, liquid, solid, plasma, and light, making it a universal tool for fabricating 2D material‐based devices and samples with sub‐1 µm resolution, all without the need for lithography technologies. With the superiority in simple sample fabrication, ultra‐clean surfaces, and robustness under harsh conditions, the technique is believed to flourish in the 2D material research field.

Development of large-volume 130TeO2 bolometers for the CROSS 2β decay search experiment

We report on the development of thermal detectors based on large-size tellurium dioxide crystals (45 × 45 × 45 mm), containing tellurium enriched in 130Te to about 91%, for the CROSS double-beta decay experiment. A powder used for the crystals growth was additionally purified by the directional solidification method, resulting in the reduction of the concentration of impurities by a factor 10, to a few ppm of the total concentration of residual elements (the main impurity is Fe). The purest part of the ingot (the first ∼ 200 mm, about 80% of the total length of the cylindrical part of the ingot) was determined by scanning segregation profiles of impurities and used for the 130TeO2 powder production with no evidence of re-contamination. The crystal growth was verified with precursors produced from a powder with natural Te isotopic composition, and two small-size (20 × 20 × 10 mm) samples were tested at a sea-level laboratory showing high bolometric and spectrometric performance together with acceptable 210Po content (below 10 mBq/kg). This growth method was then applied for the production of six large cubic 130TeO2 crystals and 4 of them were taken randomly to be characterized at the Canfranc underground laboratory, in the CROSS-dedicated low-background cryogenic facility. Two 130TeO2 samples were coated with a thin, 𝒪(100 nm), metal film in form of Al layer (on 4 sides) or AlPd grid (on a single side) to investigate the possibility to tag surface events by pulse-shape discrimination. Similarly to the small natural precursors, large-volume 130TeO2 bolometers show high performance and even better internal purity (210Po activity ∼ 1 mBq/kg, while activities of 228Th and 226Ra are below 0.01 mBq/kg), satisfying requirements for the CROSS and, potentially, next-generation experiments.

Preparation of electroless deposition of NiTiZr(P) quaternary alloy and their properties

The exceptional super elasticity and corrosion-resistance of Ni-Ti alloys have attracted a lot of attention and interest lately for a wide range of applications, and complex alloy components could be prepared effectively by different preparation techniques. Ni(P), Ni-Ti(P), Ni-Zr(P), and Ni-Ti -Zr(P) binary, ternary, and quaternary alloys were coated on mild steel by electroless deposition which is a method of plating metallic films on a substrate by the reduction of metallic complex ions in solution with the aid of reducing agent from an alkaline bath. The ternary Ni-Ti-Zr(P) alloy is considered to be one of the most promising high-temperature SMAs. SEM, XRD and EDS were used to examine the morphology, phase composition and elemental composition which demonstrate the microstructure of the deposits. The mechanical characteristics of the samples were examined through scratch test and micro hardness analysis and the value increased from 261 HV200 to 405 HV200 and that the coefficient of friction raised significantly from 0.23 to 3.5 owing to the presences of added elements in Ni(P) matrix. Polarization analysis and EIS were tested to evaluate the corrosion properties of coated samples in a non-deaerated 3.5 %wt. (NaCl) solution. The outcomes indicate that as the amount of Ti-Zr elements in the bath raised, the corrosion potential became more positive and the corrosion current density decreased to 14.903 μA/cm2. Furthermore, Ni-Ti-Zr(P) alloy coating strengthens corrosion resistance in comparison to Ni(P).

Chemically Powered Nanomotors with Magnetically Responsive Function for Targeted Delivery of Exosomes.

Janus structure plays a crucial role in achieving chemically driven nanomotors with exceptional motion performance. However, Janus-structured chemically driven nanomotors with magnetic responsiveness are commonly fabricated by sputtering metal films. In the study, a self-assembly technique is employed to asymmetrically modify the surfaces of magnetic silica (SiO2@Fe3O4) nanoparticles with platinum nanoparticles, resulting in the formation of this kind nanomotors. Compared to platinumfilm, platinum nanoparticles exhibit a larger surface area and a higher catalytic activity. Hence, the nanomotors demonstrate improved diffusion capabilities at a significantly lower concentration (0.05%) of hydrogen peroxide (H2O2). Meanwhile, exosomes have gained attention as a potential tool for the efficient delivery of biological therapeutic drugs due to their biocompatibility. However, the clinical applications of exosomes are limited by their restricted tropism. The previously obtained nanomotors are utilized to deliver exosomes, greatly enhancing its targetability. The drug doxorubicin (DOX) is subsequently encapsulated within exosomes, acting as a representative drug model. Under the conditions of H2O2 concentration at the tumor site, the exosomes exhibited a significantly enhanced rate of entry into the breast cancercells. The utilization of the nanomotors for exosomes presents a novel approach in the development of hybrid chemically and magnetically responsive nanomotors.

Analysis of photothermal heating of microhole bowtie antennas on gold metal films

AbstractIn this work, we present a numerical and experimental study of the photothermal heating of microholes array (MHA) bowtie antennas on gold metal films. The article first shows how MHAs in gold metal films can absorb more heat depending on the geometry or placement of the MHA in each gold metal films. We show numerically and experimentally that the photothermal heating exhibits a maximum when the MHAs are patterned in a bowtie‐like geometry. Numerical studies were carried out by using COMSOL multiphysics and experimental results were obtained using thermal imaging microscopy for several different MHAs geometries, respectively. Our results showed a good agreement between experimental data and the numerical simulations, validating that MHAs bowtie antennas on gold metal films heat significantly more and make them ideal for use in photothermal applications.

Unravelling the development of preferred crystallographic orientation in dual-phase amorphous/nanocrystalline Zr-V thin films

Dual-phase amorphous/nanocrystalline alloys have been proven to present enhanced properties compared to their amorphous or nanocrystalline single-phase counterparts. These dual-phase materials are typically composed of nanocrystalline cores embedded in an amorphous matrix. In contrast, a new kind of dual-phase metallic films has recently been reported in which cone-shaped crystalline regions evolve as a result of competitive growth between the amorphous and crystalline phases with increasing film thickness. Here, we demonstrate that, unlike typical dual-phase alloys, Zr-V thin films exhibiting crystalline/amorphous competitive growth develop a preferred crystallographic orientation upon growth. Relying on pole figure observations, we uncover the development of a preferred orientation of the (110) crystallographic planes in the growth direction of the film with increasing film thickness. High-resolution transmission electron microscopy analysis reveals that the crystalline regions are formed by nano-branches which grow (110)-oriented. Based on this result, together with scanning and transmission electron microscopy observations, we associate the development of the thickness-dependent preferred orientation to the impingement between cone-shaped crystalline regions. This process triggers a selective growth mechanism that favors the selection of nano-branches growing near the direction of film growth. Our results and analyses provide a step forward in understanding the growth kinetics of dual-phase alloys presenting complex microstructures.

High-sensitive and fast-responsive In2O3 thin film sensors for dual detection of NO2 and H2S gases at room temperature

In this work, the room-temperature dual gas sensing characteristics of indium oxide (In2O3) thin films towards NO2 and H2S have been studied. In2O3 thin films were synthesized by the thermal oxidation of indium metal films of various thicknesses in the range of 50–250 nm deposited by thermal evaporation method. Grazing incidence X-ray diffraction (GI-XRD) revealed the change in preferred orientation of In2O3 thin films corresponding to varying thickness, while field-emission electron microscopy studies showcased evolving surface morphologies from individual grains to granular network with respect to the increase in film thickness. Investigations were made on the ability of In2O3 thin films to detect various low concentrations of nitrogen dioxide (NO2) and hydrogen sulfide (H2S) gases at ambient temperature. In2O3 thin films synthesized using 100 nm thick In films exhibited good sensing response of around 58 and 68 % towards NO2 and H2S gases of 5 ppm respectively, at room temperature (27 °C) with the response time of 36 and 18 s. Remarkably, the lower experimental detection limit of these toxic gases could be extended up to 100 ppb. Using X-ray photoelectron spectroscopy, a large presence of surface oxygen is observed on the In2O3 thin film. The sensor has demonstrated remarkable sensing abilities, including strong selectivity, quick sensing response, and good repeatability.

Nanosized-laser-induced sub-20 nm homogenous alloy nanoparticles

Alloy nanoparticles (NPs) have great potential in nanosized 3D-printing, surface coating, plasmonic enhancement, information coding, and so forth. However, chemical-pollution-free and homogeneous sub-20 nm NPs maintain still a challenge in preparation. Here we present a smart nanosecond laser scan strategy of alloy-NPs preparation on a bilayer metal film by using a nanosized focused beam, successfully realizing controllable fabrication of the sub-20 nm homogeneous alloy NPs without pollution. As a demonstration, various sub-20 nm AgCu NPs with different volume ratios have been prepared, all NPs show narrow size distribution and uniform interparticle spacing. This simple and cost-effective method is stable and adaptable for other alloy-NPs such as AuAg NPs. In addition, such alloy NPs exhibit two-peak plasma resonance feature and information coding capacity. We believe that homogenous alloy sub-20 nm NPs will provide new application opportunities in many fields.

Modification of the electronic oscillation spectrum in metallic clusters, caused by the presence of a large spatial scale of inhomogeneity

This work presents a theoretical analysis of the oscillations of a system of degenerate electrons in metallic submicron clusters, taking into account the presence of a large-scale spatial inhomogeneity caused by quantum shell effects. The analysis was carried out in a model formulation in which the large-scale effect was taken into account by the presence of an effective external field acting on the electrons. Two approaches to the description of electron dynamics were considered: kinetic and hydrodynamic. The results obtained within these approaches are in good qualitative and quantitative agreement with each other and demonstrate that for certain cluster sizes, a spectrum of oscillations of the electronic system appears with frequencies differing by the value Δω ∼ ω0/R20 and localized in the vicinity of plasmon frequency ω0 (R0, radius of cluster). The impact of the large-scale effect on the processes of light and electron scattering by metal clusters is estimated. It is shown that maxima appear in the absorption spectrum of the electromagnetic waves, and they turn out to be shifted from the plasmon frequency by value Δω ∼ ω0/R20. Within the framework of the Born approximation, it is shown that a maximum at kR0 ∼ 4π appears in the cross section of elastic scattering of electrons on a metal cluster. The results obtained are important from the point of view of interpreting experiments on plasmonic structures, in particular, on metal films.

Accessible Double Nanohole Raman Tweezer Analysis of Single Nanoparticles.

Raman spectroscopy allows for material characterization of nanoparticles; however, probing individual nanoparticles requires an efficient way of isolating and enhancing the signal. Past works have used optical trapping with nanoapertures in metal films to measure the Raman spectra of individual nanoparticles; however, those works required custom laser tweezer systems that provided a transmission signal to verify trapping events as well as costly top-down nanofabrication. Here, we trapped Titania nanoparticles in a commercial Raman system using double nanoholes (DNH) and measured their spectra while trapped. The microscope camera allowed for measuring the trapping event in reflection mode, and a simultaneous Raman spectrum was recorded to allow for material characterization. The Raman signal was comparable to a past work that used particles a million times larger in volume without utilizing double nanoholes, and all other features were similar. The DNHs were created with a colloidal lithography technique and identified in the microscope, as confirmed by electron microscopy registration. Therefore, this approach allows a simple way of characterizing the Raman signal of individual nanoparticles while in solution by using existing commercial Raman systems.