Oxide Research Articles

Review on Biomass Derived Activated Carbons as Electrochemical Electrode Material for Supercapacitor Device

Abstract: To face the challenge of the finite nature of fossil fuels and large energy crises across the globe, there is an urgent requirement for sustainable and renewable energy sources. Moreover, it is essential to focus on energy storage in order to meet the demand of future generations. Among various energy storage devices such as fuel cells, batteries, capacitors, supercapacitors, flywheels, etc., it is the supercapacitor device that has elicited extensive research interest recently because of prominent features like high power density, fast recharge capability, and long cycle life. The main objective of this article is to review the enhancement of the electrochemical performance of supercapacitor devices. The electrochemical properties of the supercapacitor device majorly depend on the electrode materials used, which include carbonaceous materials, metal oxides, and conducting polymers. In order to reduce energy shortages and environmental pressure, carbon materials derived from biomass/waste materials have been considered remarkable candidates for electrode materials with the advantages of high abundance, low cost, and environmental friendliness. This review shows the complied study of various methodologies for the preparation of activated carbons derived from different biomass residues such as plants, animals, and microorganisms, which have been investigated in the past few years as electrochemical electrode materials for supercapacitors. Further, ongoing challenges and potential improvements in this area for creating efficient energy storage devices are also discussed. The goal of this review article is to aid in the creation of new insights for energy storage applications of biomass-generated carbons that will lead to sustainable energy development.

Design of a high-speed MCML D-Latch at 0.6 V in 45 nm CMOS technology

Metal oxide semiconductor (MOS) current mode logic (MCML) is generally preferred for high-speed circuit design. In this paper, a novel low voltage folded (LVF) MCML D-Latch is designed. The existing topologies of the MCML D-Latch consume more power and operate at 1 V. The proposed D-Latch can operate at 0.6V with better delay and power management. MCML circuits minimize delay and perform fast operations, hence it can be used in high-frequency applications. The proposed LVF MCML D–Latch is analyzed with the parameters such as power, delay, power delay product and output noise using cadence virtuoso in 45 nm complementary metal oxide semiconductor (CMOS) technology at a voltage of 0.6 V and a temperature of 27 °C. The proposed technique achieves 62.11% of power reduction, transient response speed improved by 51.23% and noise cancellation becomes 26.13% improvement over the existing circuit. It also achieves 96% of output swing which is more efficient compared to others. Finally, the parametric analysis is performed with different temperatures to verify the stability of the proposed circuit. From the simulated results, it is clear that the proposed LVF MCML D-Latch provides better performance in high-speed phase locked loop (PLL) applications.

A Li-ion battery charger based on LDO regulator with pre-charge mode in 180 nm CMOS technology

This paper presents a novel Li-Ion battery charger that utilizes a low-dropout (LDO) regulator and incorporates four control modes: low constant current mode, pre-charge current mode, fast constant current mode, and constant voltage mode. The charger aims to meet specific criteria such as high precision, high efficiency, and small form factor. Through simulation results, the following specifications were obtained using a 1.8 V supply in a 0.18 μm complementary metal–oxide–semiconductor (CMOS) technology: a trickle current of 124.7 mA, a pre-charge current of 466.94 mA, a maximum charge current of 1.06 A, and a charge voltage of 4.21 V. The proposed charger demonstrates an efficiency of 92%.

Research and Progress of Inorganic Infrared Electrochromic Materials and Devices.

Electrochromic materials can dynamically change their optical properties (such as transmittance, absorbance, and reflectance under the action of an applied voltage, and their research and application in the visible band have been widely concerned. In recent years, with the continuous development of electrochromic technology, the related research has been gradually extended to the infrared region. This invited review aims to provide an overview of the current status of several inorganic infrared electrochromic materials, to provide some references for future research, and to promote the research and application of electrochromic technology in the infrared region. This review summarizes various research results in the field of infrared electrochromic, which includes a detailed literature review and patent search. Starting from the key performance parameters and device structure characteristics of infrared electrochromic devices (ECDs), the research and progress of several types of inorganic infrared electrochromic materials, including metal oxides, plasma nanocrystals, and carbon nanomaterials, are mainly presented, and feasible optimization directions are also discussed. We believe that the potential of these materials for civilian and military applications, for example, infrared electrochromic smart windows, infrared stealth/disguise, and thermal control of spacecraft, can be fully exploited by optimizing the materials and their devices to improve their performance.

An Exceptional Valorization of CuO Nanoparticles in Ionic Liquids as an Efficient Medium for the Electrophilic Substitution of Indole Towards the Formation of Bis(indolyl)methanes

Aim: Ionic liquids are promising green solvents with simple but unique structure-related physical properties such as negligible vapour pressure, exceptional thermal conductivity, remarkable thermal stability and their suitability and inertness towards a broad range of catalytic applications. CuO NPs have been addressed as a cost-effective and a reagent of a choice that necessitates only mild reaction conditions to offer a high yield of the desired products with exceptional selectivity in a short duration of time. Therefore, in the present work, attempts have been made to explore the catalytic potentials of CuO NPs in an ionic liquid medium to synthesize biologically important bis(indolyl)methanes. Background: Catalytic explorations of metal oxide nanoparticles in ionic liquids offers a cooperative effect that has a significant impact on the kinetics as well as on the outcome of the reaction. Therefore, such catalytic systems in the present times have seized the scientific community's interest from the perspectives of sustainable development in synthetic organic chemistry. The combination of metal oxide nanoparticles with highly tunable ionic liquids is not only used to synthesize simple organic molecules but also explored in the synthesis of complex organic molecules of high commercial and biological relevance. Objectives: The current work offers a rapid and robust protocol for synthesizing bis(indolyl)methanes via electrophilic substitution reaction between indole and various aldehydes in the presence of a CuO nanoparticles-ionic liquid system. The discussion focuses on the high tolerance of different functionalities by the catalytic system leading to the synthesis of bis(indolyl)methanes. Methods: CuO NPs have been synthesized via the co-precipitation method using ionic liquid. The applicability of metal oxide nanoparticles-IL matrix was further investigated in synthesizing bis(indolyl)methanes. Results: The FT-IR absorption below 600 cm-1 and the XRD pattern showing all the peaks in the diffraction diagram revealed the formation of CuO NPs. FESEM images show the flake-shaped morphology of CuO NPs and are found to be separated from the agglomerated clusters Conclusion: Ionic liquid-CuO NPs matrix reveals good to exceptional catalytic properties, and their advancements as a catalytic system at room temperature open new avenues for synthetic organic chemists.

Predictive Synthesis of Transition Metal Carbide via Thermochemical Oxocarbon Equilibrium.

Fabricating nanoscale metal carbides is a great challenge due to them having higher Gibbs free energy of formation (ΔG°) values than other metal compounds; additionally, these carbides have harsh calcination conditions, in which metal oxidation is preferred in the atmosphere. Herein, we report oxocarbon-mediated calcination for the predictive synthesis of nanoscale metal carbides. The thermochemical oxocarbon equilibrium of CO-CO2 reactions was utilized to control the selective redox reactions in multiatomic systems of Mo-C-O, contributing to the phase-forming and structuring of Mo compounds. By harnessing the thermodynamically predicted processing window, we controlled a wide range of Mo phases (MoO2, α-MoC1-x, and β-Mo2C) and nanostructures (nanoparticle, spike, stain, and core/shell) in the Mo compounds/C nanofibers. By inducing simultaneous reactions of C-O (selective C combustion) and Mo-C (Mo carbide formation) in the nanofibers, Mo diffusion was controlled in C nanofibers, acting as a template for the nucleation and growth of Mo carbides and resulting in precise control of the phases and structures of Mo compounds. The formation mechanism of nanostructured Mo carbides was elucidated according to the CO fractions of CO-CO2 calcination. Moreover, tungsten (W) and niobium (Nb) carbides/C nanofibers have been successfully synthesized by CO-CO2 calcination. We constructed the thermodynamic map for the predictive synthesis of transition metal carbides to provide universal guideline via thermochemical oxocarbon equilibrium. We revealed that our thermochemical oxocarbon-mediated gas-solid reaction enabled the structure and phase control of nanoscale transition metal compounds to optimize the material-property relationship accordingly.

Enhancement of synergistic effects of Cu2O@MnO2@NiO Using Sarcophrynium Brachystachys leaf extract for supercapacitor electrode application

In recent times, the global population explosion and growing depletion of fossil fuels have compelled academics and scientists to do extensive research on alternate energy sources and energy storage techniques. A hydrothermal approach was used to create Copper (II) oxide (Cu2O), Manganese oxide (MnO2), Nickel oxide (NiO), and Copper@Manganese@Nickel (Cu2O@MnO2@NiO) oxide composite electrodes. Sarcophrynium Brachystachys leaves extract was used equally as a bolstering mediator. According to the Debye-Scherer equation, the crystallites size of different nanoparticles (NPs) were established to be 29.45, 24.22, 26.33 and 20.24 nm for Cu2O, MnO2, NiO, and Cu2O@MnO2@NiO, respectively, based on X-ray diffraction (XRD) experiments. According to electrochemical examinations, assessed specific capacitances for Cu2O, MnO2, NiO, and Cu2O@MnO2@NiO obtained by cyclic voltammetry (CV) using 1.00 mV/s scan rates are 785, 955, 825 and 1092 F/g, respectively. The obtained results clearly showed that separate metallic oxides specific capacitances compared with composites specific capacitance using Sarcophrynium Brachystachys leaves extract, a biological and natural constituent stands superior. Sarcophrynium Brachystachys leaves extract enhanced the synergistic impact between constituents’ ions via lowering electrode resistances, raising electrode conductivity and improving electrode characteristics.

Interfacial Interaction in MeOx/MWNTs (Me–Cu, Ni) Nanostructures as Efficient Electrode Materials for High-Performance Supercapacitors

Due to their unique physical and chemical properties, complex nanostructures based on carbon nanotubes and transition metal oxides are considered promising electrode materials for the fabrication of high-performance supercapacitors with a fast charge rate, high power density, and long cycle life. The crucial role in determining their efficiency is played by the properties of the interface in such nanostructures, among them, the type of chemical bonds between their components. The complementary theoretical and experimental methods, including dispersion-corrected density functional theory (DFT-D3) within GGA-PBE approximation, scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, X-ray photoelectron, and X-ray absorption spectroscopies, were applied in the present work for the comprehensive investigation of surface morphology, structure, and electronic properties in CuOx/MWCNTs and NiOx/MWCNTs. As a result, the type of interfacial interaction and its correlation with electrochemical characteristics were determined. It was found that the presence of both Ni–O–C and Ni–C bonds can increase the contact between NiO and MWCNTs, and, through this, promote electron transfer between NiO and MWCNTs. For NiOx/MWCNTs, better electrochemical characteristics were observed than for CuOx/MWCNTs, in which the interfacial interaction is determined only by bonding through Cu–O–C bonds. The electrochemical properties of CuOx/MWCNTs and NiOx/MWCNTs were studied to demonstrate the effect of interfacial interaction on their efficiency as electrode materials for supercapacitor applications.

Negative Magnetization and Magnetic Ordering of Rare Earth and Transition Metal Sublattices in NdFe0.5Cr0.5O3.

We investigate the effect of alloying at the 3d transition metal site of a rare-earth-transition metal oxide, by considering NdFe0.5Cr0.5O3 mixed perovskite with two equal and random distribution of 3d ions, Cr and Fe, interacting with an early 4f rare earth ion, Nd. Employing temperature- and field- dependent magnetization measurements, temperature-dependent x-ray diffraction, neutron powder diffraction, and Raman spectroscopy, we characterize itsstructural and magnetic properties. Our study reveals bipolar magnetic switching (arising from negative magnetization) and magnetocaloric effect which underline the potential of the studied mixed perovskite in device application. The neutron diffraction study shows the absence of spin reorientation transition over the entire temperature range of 1.5-320 K, although both parent compounds exhibit spin orientation transition. We discuss the microscopic origin of this curious behavior. The neutron diffraction results also reveal the ordering of Nd spins at anunusually high temperature of about 40 K, which is corroborated by Raman measurements.

Efficient and Durable Oxidation Removal of Formaldehyde over Layered Double Hydroxide Catalysts at Room Temperature.

Room temperature catalytic oxidation (RTCO) using non-noble metals has emerged as a highly promising technique for removal of formaldehyde (HCHO) under ambient conditions; however, non-noble catalysts still face the challenges related to poor water resistance and low stability under harsh conditions. In this study, we synthesized a series of layered double hydroxides (LDHs) incorporating various dual metals (MgAl, ZnAl, NiAl, NiFe, and NiTi) for formaldehyde oxidation at ambient temperature. Among the synthesized catalysts, the NiTi-LDH catalyst showed an HCHO removal efficiency and CO2 yield close to 100.0%, and exceptional water resistance and chemical stability on running 1300 min. The abundant hydroxyl groups in LDHs directly bonded with HCHO, leading to the production of CO2 and H2O, thus inhibiting the formation of CO, even in the absence of O2 and H2O. The coexistence of O2 effectively reduced the reaction barrier for H2O molecule dissociation, facilitating the formation of hydroxyl groups and their subsequent backfill on the catalyst surface. The mechanisms underlying the involvement and regeneration of hydroxyl groups in room temperature oxidation of formaldehyde were elucidated with the combined in situ DRIFTS, HCHO-TPD-MS, and DFT calculations. This work not only demonstrates the potential of LDH catalysts in environmental applications but also advances the understanding of the fundamental processes involved in room temperature oxidation of formaldehyde.

Hexagonal Mo Bronze: Single Crystal Structures, Electrocatalytic Hydrogen Evolution, and Proton Conductivity.

Molybdenum trioxide (MoO3) is a well-known transition metal oxide that has drawn much attention as a functional material having numerous applications. However, a vast majority of studies have primarily focused on α-MoO3, the thermodynamically stable polymorph of MoO3. This present work encompasses the synthesis of single crystals of two metastable hexagonal MoO3 described by the formulas {Mn0.03Na0.01}@[Mo0.93VIMo0.07VO3] (1) and {Cu0.01Na0.01}@[Mo0.97VIMo0.03VO3] (2), their comprehensive structural characterization by single-crystal X-ray crystallography, and routine spectral and microscopic studies. Interestingly, compound 1 acts as an efficient electrocatalyst for the hydrogen evolution reaction (HER) as well as an effective proton conductor in comparison to the performance of compound 2. The HER activity of compound 1 is characterized by an overpotential of 340 mV@1 mA cm-2 and a low Tafel slope of 75 mV/decade. The catalyst (compound 1) displays a Faradaic efficiency of 88% with a turnover frequency of 2.9 s-1. The proton conductivity value of this compound (1) is determined to be 4.9 × 10-3 S cm-1 at 55 °C under 98% relative humidity; the relevant proton conduction is operated by the Grotthuss mechanism with an activation energy of 0.17 eV.

Dual-Site Doping in Transition Metal Oxide Cathode Enables High-Voltage Stability of Na-Ion Batteries.

Designing cathode materials that effectively enhancing structural stability under high voltage is paramount for rationally enhancing energy density and safety of Na-ion batteries. This study introduces a novel P2-Na0.73K0.03Ni0.23Li0.1Mn0.67O2 (KLi-NaNMO) cathode through dual-site synergistic doping of K and Li in Na and transition metal (TM) layers. Combining theoretical and experimental studies, this study discovers that Li doping significantly strengthens the orbital overlap of Ni (3d) and O (2p) near the Fermi level, thereby regulates the phase transition and charge compensation processes with synchronized Ni and O redox. The introduction of K further adjusts the ratio of Nae and Naf sites at Na layer with enhanced structural stability and extended lattice space distance, enabling the suppression of TM dissolution, achieving a single-phase transition reaction even at a high voltage of 4.4V, and improving reaction kinetics. Consequently, KLi-NaNMO exhibits a high capacity (105 and 120 mAh g-1 in the voltage of 2-4.2V and 2-4.4V at 0.1 C, respectively) and outstanding cycling performance over 300 cycles under 4.2 and 4.4V. This work provides a dual-site doping strategy to employ synchronized TM and O redox with improved capacity and high structural stability via electronic and crystal structure modulation.

Fabrication of a Molybdenum Dioxide/Multi-Walled Carbon Nanotubes Nanocomposite as an Anodic Modification Material for High-Performance Microbial Fuel Cells

A nanocomposite of multi-walled carbon nanotubes (MWCNTs) decorated with molybdenum dioxide (MoO2) nanoparticles is fabricated through the reduction of phosphomolybdic acid hydrate on functionalized MWCNTs in a hydrogen–argon (10%) atmosphere in a tube furnace. The MoO2/MWCNTs composite is proposed as an anodic modification material for microbial fuel cells (MFCs). MWCNTs have outstanding physical and chemical peculiarities, with functionalized MWCNTs having substantially large electroactive areas. In addition, combined with the exceptional properties of MoO2 nanoparticles, the synergistic advantages of functionalized MWCNTs and MoO2 nanoparticles give a MoO2/MWCNTs anode a large electroactive area, excellent electronic conductivity, enhanced extracellular electron transfer capacity, and improved nutrient transfer capability. Finally, the power harvesting of an MFC with the MoO2/MWCNTs anode is improved, with the MFC showing long-term repeatability of voltage and current density outputs. This exploratory research advances the fundamental application of anodic modification to MFCs, simultaneously providing valuable guidance for the use of carbon-based transition metal oxide nanomaterials in high-performance MFCs.

Characterization of lead dioxide composite electrode and its electrochemical properties

TiO2 nanoparticles, as a typical inert metal oxide, were added into [Formula: see text] plating solutions to prepare Ti/PbO2+nano-TiO2 composite coatings. The effect of TiO2 nanoparticles on the electrodeposition process of PbO2 was investigated by voltammetric studies. The composition, structure and morphology of the obtained composite coatings were characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM), respectively. Cyclic voltammetry was employed to study the effect of nano-TiO2 particles on the PbO2 electrodeposition process. It is found that high doping (2–8 g/L) of TiO2 nanoparticles significantly decreased the crystallite size which can be attributed to a crystallite-refining effect of nano-TiO2 during the electrodeposition of PbO2.

A novel approach for thermal conductivity improvement of metal oxide nanofluids

A novel approach for thermal conductivity improvement of metal oxide nanofluids

Copper oxide nanoparticles modified electrodes for high-sensitivity detection of uric acid in athletes

This study introduces an innovative electrochemical sensor leveraging copper oxide nanoparticles for detecting uric acid levels in athletes with enhanced sensitivity and selectivity. Employing a novel synthesis protocol, uniform copper oxide nanoparticles were integrated into a chitosan-glutathione biogel matrix, creating a high-performance sensing electrode. The nanoparticles were extensively characterized using XRD, SEM, FTIR, and XPS techniques, confirming their crystalline structure, morphology, and purity. The average crystallite size was determined to be 18 nm. Electrochemical evaluation of the sensor using cyclic voltammetry and electrochemical impedance spectroscopy revealed significantly improved electron transfer kinetics and catalytic activity towards uric acid oxidation. The sensor exhibited a wide linear detection range from 1 μM to 1.2 mM, encompassing both physiological and pathological uric acid levels. Notably, the limit of detection was found to be 0.27 μM, surpassing the performance of most existing metal oxide based uric acid sensors. The sensor also demonstrated excellent anti-interference capability against commonly coexisting species in biological fluids. Furthermore, the practical applicability of the sensor was validated by successfully determining uric acid concentrations in human serum, plasma, and sweat samples, with impressive recovery rates ranging from 96% to 102%. The stability, reproducibility, and cost-effectiveness of the developed sensor make it a promising tool for routine health monitoring and early intervention in athletes, facilitating personalized training and preventing complications associated with uric acid imbalances. The present work offers a significant advancement in non-invasive, reliable, and efficient assessment of uric acid, with potential for widespread implementation in sports medicine and general healthcare.

Directly electrospun copper ferrite CuFe2O4 nanofiber-based for gas classification

The cross-response is a considerable primary challenge of gas sensors based on semiconducting metal oxide (SMO), especially in detecting and classifying gases with comparable properties. In this work, the copper ferrite (CuFe2O4, CFO) nanofibers (NFs)-based sensors were straightforwardly synthesised by electrospinning technique. The morphology of the CFO NFs was observed using scanning electron microscopy (SEM), which revealed a rough surface with a diameter of approximately 80 nm. The composition of the fiber was confirmed by energy dispersive spectroscopy (EDS), which showed the fiber’s chemical elements to include Cu, Fe, and O. The microstructural characteristics of the CFO NFs were analysed using x-ray diffraction (XRD) and Raman spectroscopy, confirming the characteristic peaks of the CFO phase. The gas sensing characteristics of CFO-based sensors have been examined to 25−200 ppm of various gases of (CH3)2CO, CH3CH2OH, NH3, and H2 at a function of working temperature of 350−450 °C. The gas-sensing mechanism of the sensor based on CFO NFs is explained by the surface depletion layer and the grain boundary model. The successful categorisation of these gases into distinct groups was realised, indicating that the issue of cross-response caused by interfering gases was effectively addressed with the aid of an artificial intelligence algorithm.

Evaluation of OxiOrganosolv pretreated hardwood and softwood lignocelluloses as substrates for the chemoenzymatic production of 5-hydroxymethylfurfural (HMF)

Furans, such as 5-hydroxymethylfurfural (HMF), are compounds of great importance that can serve as starting materials for the synthesis of polymers. Their production from lignocellulose-derived sugar streams offers a promising alternative to fossil fuels, while enabling biomass transformation to chemicals with higher value. In the present work, the production of HMF from OxiOrganosolv pretreated beechwood and pine was assessed by integrating a three-step process of enzymatic saccharification and isomerization followed by catalytic dehydration. The use of isobutanol in the pretreatment solvent and the addition of polyoxometallates (POMs) as oxidative catalysts were evaluated. The results showed that isobutanol leads to high delignification rates for both beechwood and pine, yielding cellulose-rich pulps with high susceptibility to enzymatic hydrolysis and isomerization. A fructose production up to 51.2 and 53.4 g/g of pretreated material was achieved for beechwood and pine, respectively, corresponding to 14 and 11.3 g of HMF/g of pretreated material. Regarding the use of POMs, the commercially available phosphomolybdic acid (HPMO) and POMs modified with oxidation metals (Fe-PMO, Cu-PMO) were tested, verifying their beneficial effect to lignin depolymerization and the composition of the final pulp. Hydrolysates produced from HPMo and Cu-PMo-assisted OxiOrganosolv pretreatment were efficiently used for the production of HMF, while severe inhibition of the dehydration reaction was observed with the hydrolysates from Fe-PMo pretreated biomass due to the presence of residual metals. This is the first systematic report comparing two lignocellulosic materials subjected to different pretreatment conditions for their potential to produce fructose and, subsequently, HMF.

Convergent Paired Electrolysis for [3+2] Cycloaddition of Azidotrimethylsilane with N-Heterocycles.

A widely used method to obtain tetrazoles is through the azide and nitrile [3+2] cycloaddition. However, this process often involves using non-recyclable transition metals or Lewis acid catalysts and stoichiometric amounts of oxidants and additives, which reduces atom efficiency. We have discovered a convergent paired electrochemical reaction to perform this cycloaddition reaction, without the need for metal catalysts or oxidants. This tetrazolation strategy uses azidotrimethylsilane (TMSN3) and N-heterocycles in an undivided cell at a constant current. We use a mixture of CH3CN and equivalent amounts of H2O as co-solvent at room temperature. It is crucial to produce a stoichiometric amount of active hydroxyl ions through the cathodic reduction of water. Cyclic voltammetry (CV) studies and control experiments confirm that the cycloaddition reaction is specific to the electrode electron transfer process, eliminating the need for a mediator to shuttle electrons. This metal- and oxidant-free strategy is highly compatible with different functional groups and produces products with moderate to good yields. We have successfully tetrazolated bioactive compounds at a late stage, scaled up batches efficiently, and synthesized free amino-containing N-heterocycles via denitrogenation of tetrazoles.

Synergistic Bulk and Surface Engineering for Expeditious and Durable Reversible Protonic Ceramic Electrochemical Cells Air Electrode.

Reversible protonic ceramic electrochemical cells (R-PCECs) offer the potential for high-efficiency power generation and green hydrogen production at intermediate temperatures. However, the commercial viability of R-PCECs is hampered by the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) within conventional air electrodes operating at reduced temperatures. To address this challenge, we introduce a novel approach based on the simultaneous optimization of bulk-phase metal-oxygen bonds and in-situ formation of a metal oxide nano-catalyst surface modification. This strategy is designed to expedite the ORR/OER electrocatalytic activity of air electrodes exhibiting triple (O2-, H+, e-) conductivity. Specifically, our engineered air electrode nanocomposite-Ba(Co0.4Fe0.4Zr0.1Y0.1)0.95Ni0.05F0.1O2.9-δ demonstrates remarkable ORR/OER catalytic activity and exceptional durability in R-PCECs. This is evidenced by significantly improved peak power density from 626mW cm-2 to 996mW cm-2 and highly stable reversibility over a 100-hour cycling period. This research offers a rational design strategy to achieve high-performance R-PCEC air electrodes with superior operational activity and stability for efficient and sustainable energy conversion and storage. This article is protected by copyright. All rights reserved.