Metal-organic Framework Glasses Research Articles

Novel metal-organic framework materials: blends, liquids, glasses and crystal-glass composites.

Metal-organic frameworks (MOFs) are often, and incorrectly, believed to be purely crystalline solids. This Feature Article highlights a selection of highly disordered MOF-based materials. This disorder gives rise to numerous possibilities in the fabrication of new MOF materials, and presents an alternative method of novel materials discovery, outside of the synthesis of increasingly complex crystalline structures. The formation of liquid MOFs and resultant melt-quenched glasses is reviewed, along with several categories of novel MOF-based materials including blends, flux melted glasses and crystal-glass composites.

Flux melting of metal-organic frameworks.

Recent demonstrations of melting in the metal-organic framework (MOF) family have created interest in the interfacial domain between inorganic glasses and amorphous organic polymers. The chemical and physical behaviour of porous hybrid liquids and glasses is of particular interest, though opportunities are limited by the inaccessible melting temperatures of many MOFs. Here, we show that the processing technique of flux melting, 'borrowed' from the inorganic domain, may be applied in order to melt ZIF-8, a material which does not possess an accessible liquid state in the pure form. Effectively, we employ the high-temperature liquid state of one MOF as a solvent for a secondary, non-melting MOF component. Differential scanning calorimetry, small- and wide-angle X-ray scattering, electron microscopy and X-ray total scattering techniques are used to show the flux melting of the crystalline component within the liquid. Gas adsorption and positron annihilation lifetime spectroscopy measurements show that this results in enhanced, accessible porosity to a range of guest molecules in the resultant flux melted MOF glass.

Structural evolution in a melt-quenched zeolitic imidazolate framework glass during heat-treatment.

A pronounced enthalpy release occurs around 1.38Tg in the prototypical metal-organic framework glass formed from ZIF-4 [Zn(C3H3N2)2], but there is no sign for any crystallization (i.e., long-range ordering) taking place. The enthalpy release peak is attributed to pore collapse and structural densification.

Mechanical Properties and Processing Techniques of Bulk Metal-Organic Framework Glasses.

Melt quenched metal-organic framework (MOF) glasses define a new category of glass, distinct from metallic, organic, and inorganic glasses, owing to the dominant role of metal-ligand coordination bonding. The mechanical properties of glasses in general are important given their application in protective coatings and display technologies, though little is known about MOF glasses in this respect. The experimental elucidation of key properties such as their scratch resistance has been limited by the lack of processing methodologies capable of producing bulk glass samples. Here, nanoindentation was used to investigate the Young's modulus and hardness of four melt-quenched glasses formed from zeolitic imidazolate frameworks (ZIF): agZIF-4, agZIF-62, agZIF-76, and agZIF-76-mbIm. The creep resistance of the melt-quenched glasses was studied via strain-rate jump (SRJ) tests and through constant load and hold (CLH) indentation creep experiments. Values for the strain-rate sensitivity were found to be close to those for other glassy polymers and Se-rich GeSe chalcogenide glasses. Vacuum hot-pressing of agZIF-62 resulted in an inhomogeneous bulk sample containing the glass and amorphous non-melt-quenched aZIF-62. Remelting and annealing, however, resulted in the fabrication of a transparent, bubble-free bulk specimen, which allowed the first scratch testing experiments to be performed on an MOF glass.

Subwavelength Spatially Resolved Coordination Chemistry of Metal-Organic Framework Glass Blends.

Microstructured metal-organic framework (MOF) glasses have been produced by combining two amorphous MOFs. However, the electronic structure of these materials has not been interrogated at the length scales of the chemical domains formed in these glasses. Here, we report a subwavelength spatially resolved physicochemical analysis of the electronic states at visible and UV energies in a blend of two zeolitic imidazolate frameworks (ZIFs), ZIF-4-Co and ZIF-62-Zn. By combining spectroscopy at visible and UV energies as well as at core ionization energies in electron energy loss spectroscopy in the scanning transmission electron microscope with density functional theory calculations, we show that domains less than 200 nm in size retain the electronic structure of the precursor crystalline ZIF phases. Prototypical signatures of coordination chemistry including d- d transitions in ZIF-4-Co are assigned and mapped with nanoscale precision.

Prediction of the Glass Transition Temperatures of Zeolitic Imidazolate Glasses through Topological Constraint Theory

A topological constraint model is developed to predict the compositional scaling of glass transition temperature ( Tg) in a metal-organic framework glass, agZIF-62 [Zn(Im2- xbIm x)]. A hierarchy of bond constraints is established using a combination of experimental results and molecular dynamic simulations with ReaxFF. The model can explain the topological origin of Tg as a function of the benzimidazolate concentration with an error of 3.5 K. The model is further extended to account for the effect of 5-methylbenzimidazolate, enabling calculation of a ternary diagram of Tg with a mixture of three organic ligands in an as-yet unsynthesized, hypothetical framework. We show that topological constraint theory is an effective tool for understanding the properties of metal-organic framework glasses.

Metal-organic framework glasses with permanent accessible porosity

To date, only several microporous, and even fewer nanoporous, glasses have been produced, always via post synthesis acid treatment of phase separated dense materials, e.g. Vycor glass. In contrast, high internal surface areas are readily achieved in crystalline materials, such as metal-organic frameworks (MOFs). It has recently been discovered that a new family of melt quenched glasses can be produced from MOFs, though they have thus far lacked the accessible and intrinsic porosity of their crystalline precursors. Here, we report the first glasses that are permanently and reversibly porous toward incoming gases, without post-synthetic treatment. We characterize the structure of these glasses using a range of experimental techniques, and demonstrate pores in the range of 4 – 8 Å. The discovery of MOF glasses with permanent accessible porosity reveals a new category of porous glass materials that are elevated beyond conventional inorganic and organic porous glasses by their diversity and tunability.

Thermodynamic features and enthalpy relaxation in a metal-organic framework glass.

In this work, we explore the thermodynamic evolution in a melt-quenched metal-organic framework glass, formed from ZIF-62 upon heating to the melting point (Tm), and subsequent enthalpy relaxation. The temperature dependence of the difference in Gibbs free energy between the liquid and crystal states of ZIF-62 in the temperature range from the glass transition temperature (Tg) to Tm is found to be weaker than those of other types of glasses, e.g., metallic glasses. Additionally, we find that the stretched exponent of the enthalpy relaxation function in the glass varies significantly (β = 0.44-0.76) upon changing the extent of sub-Tg annealing, compared to metallic and oxide glasses with similar Tgs, suggesting a high degree of structural heterogeneity. Pair distribution function results suggest no significant structural changes during the sub-Tg relaxation in ZIF-62 glass.

Melt-Quenched Hybrid Glasses from Metal-Organic Frameworks.

While glasses formed by quenching the molten states of inorganic non-metallic, organic, and metallic species are known, those containing both inorganic and organic moieties are far less prevalent. Network materials consisting of inorganic nodes linked by organic ligands do however exist in the crystalline or amorphous domain. This large family of open framework compounds, called metal-organic frameworks (MOFs) or coordination polymers, has been investigated intensively in the past two decades for a variety of applications, almost all of which stem from their high internal surface areas and chemical versatility. Recently, a selection of MOFs has been demonstrated to undergo melting and vitrification upon cooling. Here, these recent discoveries and the connections between the fields of MOF chemistry and glass science are summarized. Possible advantages and applications for MOF glasses produced by utilizing the tunable chemistry of the crystalline state are also highlighted.

Nanoporous Transparent MOF Glasses with Accessible Internal Surface.

While glassy materials can be made from virtually every class of liquid (metallic, molecular, covalent, and ionic), to date, formation of glasses in which structural units impart porosity on the nanoscopic level remains undeveloped. In view of the well-established porosity of metal-organic frameworks (MOFs) and the flexibility of their design, we have sought to combine their formation principles with the general versatility of glassy materials. Although the preparation of glassy MOFs can be achieved by amorphization of crystalline frameworks, transparent glassy MOFs exhibiting permanent porosity accessible to gases are yet to be reported. Here, we present a generalizable chemical strategy for making such MOF glasses by assembly from viscous solutions of metal node and organic strut and subsequent evaporation of a plasticizer-modulator solvent. This process yields glasses with 300 m(2)/g internal surface area (obtained from N2 adsorption isotherms) and a 2 nm pore-pore separation. On a volumetric basis, this porosity (0.33 cm(3)/cm(3)) is 3 times that of the early MOFs (0.11 cm(3)/cm(3) for MOF-2) and within range of the most porous MOFs known (0.60 cm(3)/cm(3) for MOF-5). We believe the porosity originates from a 3D covalent network as evidenced by the disappearance of the glass transition signature as the solvent is removed and the highly cross-linked nanostructure builds up. Our work represents an important step forward in translating the versatility and porosity of MOFs to glassy materials.

Porosity in metal–organic framework glasses

The porosity of a glass formed by melt-quenching a metal-organic framework, has been characterized by positron annihilation lifetime spectroscopy. The results reveal porosity intermediate between the related open and dense crystalline frameworks ZIF-4 and ZIF-zni. A structural model for the glass was constructed using an amorphous polymerization algorithm, providing additional insight into the gas-inaccessible nature of porosity and the possible applications of hybrid glasses.

Hybrid glasses from strong and fragile metal-organic framework liquids.

Hybrid glasses connect the emerging field of metal-organic frameworks (MOFs) with the glass formation, amorphization and melting processes of these chemically versatile systems. Though inorganic zeolites collapse around the glass transition and melt at higher temperatures, the relationship between amorphization and melting has so far not been investigated. Here we show how heating MOFs of zeolitic topology first results in a low density ‘perfect' glass, similar to those formed in ice, silicon and disaccharides. This order–order transition leads to a super-strong liquid of low fragility that dynamically controls collapse, before a subsequent order–disorder transition, which creates a more fragile high-density liquid. After crystallization to a dense phase, which can be remelted, subsequent quenching results in a bulk glass, virtually identical to the high-density phase. We provide evidence that the wide-ranging melting temperatures of zeolitic MOFs are related to their network topologies and opens up the possibility of ‘melt-casting' MOF glasses.