Metal Nanoparticles Research Articles

Effects of copper, and aluminium in ionic, and nanoparticulate form on growth rate and gene expression of Setaria italica seedlings

This study aims to determine the effects of copper, copper oxide nanoparticles, aluminium, and aluminium oxide nanoparticles on the growth rate and expression of ACT-1, CDPK, LIP, NFC, P5CR, P5CS, GR, and SiZIP1 genes in five days old seedling of Setaria italica ssp. maxima, cultivated in hydroponic culture. Depending on their concentration (ranging from 0.1 to 1.8 mg L−1), all tested substances had both stimulating and inhibiting effects on the growth rate of the seedlings. Copper and copper oxide-NPs had generally a stimulating effect whereas aluminium and aluminium oxide-NPs at first had a positive effect but in higher concentrations they inhibited the growth. Treating the seedlings with 0.4 mg L−1 of each tested toxicant was mostly stimulating to the expression of the genes and reduced the differences between the transcript levels of the coleoptiles and roots. Increasing concentrations of the tested substances had both stimulating and inhibiting effects on the expression levels of the genes. The highest expression levels were usually noted at concentrations between 0.4 and 1.0 mg/L of each metal and metal nanoparticle, except for SiZIP1, which had the highest transcript amount at 1.6 mg L−1 of Cu2+ and at 0.1–0.8 mg L−1 of CuO-NPs, and LIP and GR from the seedling treated with Al2O3-NPs at concentrations of 0.1 and 1.6 mg L−1, respectively.

Site-Selective Deposition of Silica Nanoframes and Nanocages onto Faceted Gold Nanostructures Using a Primer-free Tetraethyl Orthosilicate Synthesis.

The Stöber method for forming spherical silica colloids is well-established as one of the pillars of colloidal synthesis. In a modified form, it has been extensively used to deposit both porous and protective shells over metal nanomaterials. Current best-practice techniques require that the vitreophobic surface of metal nanoparticles be primed with a surface ligand to promote silica deposition. Although such techniques have proved highly successful in forming core-shell configurations, the site-selective deposition of silica onto preselected areas of faceted metal nanostructures has proved far more challenging. Herein, a primer-free TEOS-based synthesis is demonstrated that is capable of forming architecturally complex nanoframes and nanocages on the pristine surfaces of faceted gold nanostructures. The devised synthesis overcomes vitreophobicity using elevated TEOS concentrations that trigger silica nucleation along the low-coordination sites where gold facets meet. Continued deposition sees the emergence of a well-connected frame followed by the lateral infilling of the openings formed over gold facets. With growth readily terminated at any point in this sequence, the synthesis distinguishes itself in being able to achieve patterned and tunable silica depositions expressing interfaces that are uncorrupted by primers. The so-formed structures are demonstrated as template materials capable of asserting high-level control over synthesis and assembly processes by using the deposited silica as a mask that deactivates selected areas against these processes while allowing them to proceed elsewhere. The work, hence, extends the capabilities and versatility of TEOS-based syntheses and provides pathways for forming multicomponent nanostructures and nanoassemblies with structurally engineered properties.

Photoinduced Ordered Growth of Copper-Doped Polyaniline Nanotubes: A Method to Improve the Catalytic Activity for C-N Coupling Reactions.

Polyaniline-supported metal nanoparticles (M@PANIs) have been widely employed as catalysts for organic reactions. Traditionally, the catalytic activities of the materials can be improved by introducing functional groups onto the aniline monomers, but it may enhance the catalyst cost and reduce the production yield of the material. This work reports a new strategy for improving the catalytic activity of M@PANIs. It was found that induced by visible light in the presence of a polymeric carbon nitride catalyst and copper dopant, the oxidative polymerization of simple aniline occurred slowly and orderly to produce the copper-doped polyaniline nanotubes. The unique tubular structure protected the catalytically active Cu(I) inside and endowed even more sufficient contact of the catalytic sites with reactants so that the material exhibited excellent catalytic performances in C-N coupling reactions.

Rutile TiO2-Supported Pt Nanoparticle Catalysts for the Low-Temperature Oxidation of Ethane to Ethanol.

Structure-function relationships of supported metal nanoparticle catalysts in the CO-assisted oxidation of ethane to ethanol were investigated. A rutile TiO2-supported Pt nanoparticle catalyst exhibited the highest ethanol production rate and selectivity. During the reaction, sequential changes in the geometric/electronic states and the particle size of the Pt nanoparticles were observed. The comparison of the catalytic performances of model catalysts with controlled metal-support interactions revealed that Pt0 nanoparticles of 2-3 nm with a high fraction of the surface Ptδ+ species are highly active for the oxidation of ethane to ethanol. The coadded CO plays a pivotal role not only in tuning the oxidation state of the surface Pt but also in producing H2O2, which is the true oxidant for the reaction. The supported Pt nanoparticle uses in situ-generated H2O2 to activate ethane, where the C2H5OOH intermediate is formed through a nonradical mechanism and subsequently converted to C2H5OH. This reaction occurs even at 50 °C with an apparent activation energy of 32 kJ mol-1. The present study sheds light on the usefulness of surface-engineered Pt nanoparticles for the low-temperature oxidation of ethane to ethanol.

Nanoscopic catalyst-loaded porous metal oxide hollow frameworks using porous block copolymer templates for high performance formaldehyde sensors

Porous and hollow nanostructures functionalized with nanoscopic catalysts have attracted considerable interest in a wide range of applications depending on surface reactions. In this study, we present an efficient and versatile synthetic strategy of porous metal oxide hollow frameworks (HFs) decorated with noble metal nanoparticles (NPs). The key lies in the use of porous and bicontinuous polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) microparticles as templates, which feature pores on the order of several hundred nanometers in size. Homogeneous Pt loading on the surface of the porous microparticles is achieved through the preferential adsorption of Pt precursors onto the P4VP block via electrostatic interactions. Subsequent SnO2 thin film deposition and calcination ultimately yield honeycomb-like SnO2 HFs with macropores and uniform distribution of Pt NPs. The Pt NP-loaded SnO2 HFs exhibit exceptional formaldehyde (HCHO) sensing capabilities, characterized by remarkable sensitivity (31.4 at 5 ppm), rapid response time (4.7 s at 5 ppm), ultra-low detection limit of 10 ppb, and remarkable cross-selectivity. These outstanding features result from their high surface area, gas permeability within porous hollow structures, and well-dispersed Pt NPs, which catalytically activate the sensor. Our study provides great promise for advancing surface catalytic reactions due to their exceptional surface area and gas permeability, paving the way for future applications.

Rutile TiO2-Supported Pt Nanoparticle Catalysts for the Low-Temperature Oxidation of Ethane to Ethanol.

Structure-function relationships of supported metal nanoparticle catalysts in the CO-assisted oxidation of ethane to ethanol were investigated. A rutile TiO2-supported Pt nanoparticle catalyst exhibited the highest ethanol production rate and selectivity. During the reaction, sequential changes in the geometric/electronic states and the particle size of the Pt nanoparticles were observed. The comparison of the catalytic performances of model catalysts with controlled metal-support interactions revealed that Pt0 nanoparticles of 2-3 nm with a high fraction of the surface Ptδ+ species are highly active for the oxidation of ethane to ethanol. The coadded CO plays a pivotal role not only in tuning the oxidation state of the surface Pt but also in producing H2O2, which is the true oxidant for the reaction. The supported Pt nanoparticle uses in situ-generated H2O2 to activate ethane, where the C2H5OOH intermediate is formed through a nonradical mechanism and subsequently converted to C2H5OH. This reaction occurs even at 50 °C with an apparent activation energy of 32 kJ mol-1. The present study sheds light on the usefulness of surface-engineered Pt nanoparticles for the low-temperature oxidation of ethane to ethanol.

Site-Selective Deposition of Silica Nanoframes and Nanocages onto Faceted Gold Nanostructures Using a Primer-free Tetraethyl Orthosilicate Synthesis.

The Stöber method for forming spherical silica colloids is well-established as one of the pillars of colloidal synthesis. In a modified form, it has been extensively used to deposit both porous and protective shells over metal nanomaterials. Current best-practice techniques require that the vitreophobic surface of metal nanoparticles be primed with a surface ligand to promote silica deposition. Although such techniques have proved highly successful in forming core-shell configurations, the site-selective deposition of silica onto preselected areas of faceted metal nanostructures has proved far more challenging. Herein, a primer-free TEOS-based synthesis is demonstrated that is capable of forming architecturally complex nanoframes and nanocages on the pristine surfaces of faceted gold nanostructures. The devised synthesis overcomes vitreophobicity using elevated TEOS concentrations that trigger silica nucleation along the low-coordination sites where gold facets meet. Continued deposition sees the emergence of a well-connected frame followed by the lateral infilling of the openings formed over gold facets. With growth readily terminated at any point in this sequence, the synthesis distinguishes itself in being able to achieve patterned and tunable silica depositions expressing interfaces that are uncorrupted by primers. The so-formed structures are demonstrated as template materials capable of asserting high-level control over synthesis and assembly processes by using the deposited silica as a mask that deactivates selected areas against these processes while allowing them to proceed elsewhere. The work, hence, extends the capabilities and versatility of TEOS-based syntheses and provides pathways for forming multicomponent nanostructures and nanoassemblies with structurally engineered properties.

Hydrophobic Microenvironment Modulation of Ru Nanoparticles in Metal-Organic Frameworks for Enhanced Electrocatalytic N2 Reduction.

The modulation of the chemical microenvironment surrounding metal nanoparticles (NPs) is an effective means to enhance the selectivity and activity of catalytic reactions. Herein, a post-synthetic modification strategy is developed to modulate the hydrophobic microenvironment of Ru nanoparticles encapsulated in a metal-organic framework (MOF), MIP-206, namely Ru@MIP-Fx (where x represents perfluoroalkyl chain lengths of 3, 5, 7, 11, and 15), in order to systematically explore the effect of the hydrophobic microenvironment on the electrocatalytic activity. The increase of perfluoroalkyl chain length can gradually enhance the hydrophobicity of the catalyst, which effectively suppresses the competitive hydrogen evolution reaction (HER). Moreover, the electrocatalytic production rate of ammonia and the corresponding Faraday efficiency display a volcano-like pattern with increasing hydrophobicity, with Ru@MIP-F7 showing the highest activity. Theoretical calculations and experiments jointly show that modification of perfluoroalkyl chains of different lengths on MIP-206 modulates the electronic state of Ru nanoparticles and reduces the rate-determining step for the formation of the key intermediate of N2H2 *, leading to superior electrocatalytic performance.

Photoinduced Ordered Growth of Copper-Doped Polyaniline Nanotubes: A Method to Improve the Catalytic Activity for C-N Coupling Reactions.

Polyaniline-supported metal nanoparticles (M@PANIs) have been widely employed as catalysts for organic reactions. Traditionally, the catalytic activities of the materials can be improved by introducing functional groups onto the aniline monomers, but it may enhance the catalyst cost and reduce the production yield of the material. This work reports a new strategy for improving the catalytic activity of M@PANIs. It was found that induced by visible light in the presence of a polymeric carbon nitride catalyst and copper dopant, the oxidative polymerization of simple aniline occurred slowly and orderly to produce the copper-doped polyaniline nanotubes. The unique tubular structure protected the catalytically active Cu(I) inside and endowed even more sufficient contact of the catalytic sites with reactants so that the material exhibited excellent catalytic performances in C-N coupling reactions.

Fractal Characterization of Simulated Metal Nanocatalysts in 3D

The surface roughness of metal nanoparticles is known to be influential toward their properties, but the quantification of surface roughness is challenging. Given the recent availability of large‐scale simulated data and tools for the computation of the box‐counting dimension of simulated atomistic objects, researchers are now enabled to study the connections between the surface roughness of metal nanoparticles and their properties. Herein, the relationships between the fractal box‐counting dimension of metal nanoparticle surfaces and structural features relevant to experimental and computational studies are investigated, providing actionable insights for the manufacturing of rough nanoparticles. This approach differs from conventional concepts of roughness, but introduces a possible indicator for their functionalities such as catalytic performance that was not previously accessible. It is found that, while it remains difficult to consistently correlate the dimension with the catalytic activity of surface facets, matching trends with their surface energy, thermodynamic stability, and number of bond vacancy are observed. This highlights the potential of fractal box‐counting dimensions to rationalize catalytic activity trends among metal nanoparticles, and opens up opportunities for the design of nanocatalysts with better performance via surface engineering.

Stable silver nanoparticles synthesis using Tabebuia aurea leaf extract for efficient water treatment: A sustainable approach to environmental remediation

Noble metal nanoparticles have garnered significant attention owing to their extensive utility across various domains. Among them, silver nanoparticles (SNP) deliver solutions to various environmental problems in the area of water treatment. SNP are conventionally fabricated using chemical methods with toxic chemicals. In this work, we used leaf extract of Tabebuia aurea to rapidly synthesize stable silver nanoparticles (TA-SNP). The analysis of the UV–vis spectrum revealed surface plasmon resonance at 438 nm which confirmed the formation of SNP. The SEM image showed the nanosized and spherical morphology of the TA-SNP with a mean size of 48.68 nm. XRD pattern of nanoparticles pertaining to (101) plane, ascertained the fcc crystal arrangement with 19.36 nm as crystallite diameter. DLS confirmed the colloidal stability with a zeta potential of −26.7 mV. The FTIR studies suggest that the presence of various functional moieties of the leaf extract is accountable for the formation and capping of nanoparticle synthesis. The efficiency of TA-SNP as a potential catalyst in the reduction of the Congo Red and Acid Blue 113 dye with NaBH4 was demonstrated with first-order kinetic constants of 0.2723 and 0.1335 min –1 respectively. Hence, the environmentally friendly and cost-effective synthesis method used for SNP in the present study holds promise for developing nanocatalysts aimed at effectively removing diverse dyes from wastewater, thereby contributing to environmental remediation.

Green Synthesis of Metallic Nanoparticles from Quercus Bark Extracts: Characterization and Functional Properties

Quercus species are utilized for their durable wood, providing sustenance for wildlife, conserving biodiversity, and contributing ecological, medicinal, and esthetic benefits to ecosystems and landscapes. In this study, we aimed to use the bark of three Quercus species (Q. dalechampi, Q. fraineto, and Q. petraea) for the synthesis of silver and gold nanoparticles (AgNPs and AuNPs). The aqueous extracts from the bark of Quercus sp. acted both as reducing and stabilizing agent, facilitating the rapid synthesis of AuNPs (AuQD, AuQF, and AuQP) and AgNPs (AgQD, AgQF, and AgQP). The obtained nanoparticles were characterized using UV-vis spectroscopy, TEM, DLS, and FTIR. Characterizations revealed that the nanoparticles exhibited a variety of shapes, such as polygonal, triangular, and spherical forms, with sizes ranging between 14 and 24 nm for AuNPs and 45–70 nm for AgNPs. The total phenolic content was assessed through spectroscopic methods, while several individual phenolic compounds were identified and quantified using UPLC-PDA. Furthermore, we assessed the antioxidant, antibacterial, and antifungal capacities of AuNPs, AgNPs, and raw extracts. The highest antioxidant activity was observed for raw extracts, followed by AgNPs and AuNPs, while the most potent antibacterial and antifungal activity was observed in AgQP. Moreover, cytotoxicity was examined in a human keratinocyte cell line (HaCaT). The results indicated no cytotoxic effects for AuNPs, while AgNPs and the raw extracts exhibited cytotoxic effects after 48 h of incubation. This research underscores the multifaceted utility of Quercus bark extracts in the green synthesis of metallic nanoparticles and their subsequent bioactivity assessment, suggesting promising perspectives for their application in various fields while urging cautious consideration of their cytotoxic implications.

Green Synthesis of Metallic Nanoparticles from Quercus Bark Extracts: Characterization and Functional Properties

Quercus species are utilized for their durable wood, providing sustenance for wildlife, conserving biodiversity, and contributing ecological, medicinal, and esthetic benefits to ecosystems and landscapes. In this study, we aimed to use the bark of three Quercus species (Q. dalechampi, Q. fraineto, and Q. petraea) for the synthesis of silver and gold nanoparticles (AgNPs and AuNPs). The aqueous extracts from the bark of Quercus sp. acted both as reducing and stabilizing agent, facilitating the rapid synthesis of AuNPs (AuQD, AuQF, and AuQP) and AgNPs (AgQD, AgQF, and AgQP). The obtained nanoparticles were characterized using UV-vis spectroscopy, TEM, DLS, and FTIR. Characterizations revealed that the nanoparticles exhibited a variety of shapes, such as polygonal, triangular, and spherical forms, with sizes ranging between 14 and 24 nm for AuNPs and 45–70 nm for AgNPs. The total phenolic content was assessed through spectroscopic methods, while several individual phenolic compounds were identified and quantified using UPLC-PDA. Furthermore, we assessed the antioxidant, antibacterial, and antifungal capacities of AuNPs, AgNPs, and raw extracts. The highest antioxidant activity was observed for raw extracts, followed by AgNPs and AuNPs, while the most potent antibacterial and antifungal activity was observed in AgQP. Moreover, cytotoxicity was examined in a human keratinocyte cell line (HaCaT). The results indicated no cytotoxic effects for AuNPs, while AgNPs and the raw extracts exhibited cytotoxic effects after 48 h of incubation. This research underscores the multifaceted utility of Quercus bark extracts in the green synthesis of metallic nanoparticles and their subsequent bioactivity assessment, suggesting promising perspectives for their application in various fields while urging cautious consideration of their cytotoxic implications.

Progress in the Sustainable Development of Biobased (Nano)materials for Application in Water Treatment Technologies.

Water pollution remains a widespread problem, affecting the health and wellbeing of people around the globe. While current advancements in wastewater treatment and desalination show promise, there are still challenges that need to be overcome to make these technologies commercially viable. Nanotechnology plays a pivotal role in water purification and desalination processes today. However, the release of nanoparticles (NPs) into the environment without proper safeguards can lead to both physical and chemical toxicity. Moreover, many methods of NP synthesis are expensive and not environmentally sustainable. The utilization of biomass as a source for the production of NPs has the potential to mitigate issues pertaining to cost, sustainability, and pollution. The utilization of biobased nanomaterials (bio-NMs) sourced from biomass has garnered attention in the field of water purification due to their cost-effectiveness, biocompatibility, and biodegradability. Several research studies have been conducted to efficiently produce NPs (both inorganic and organic) from biomass for applications in wastewater treatment. Biosynthesized materials such as zinc oxide NPs, phytogenic magnetic NPs, biopolymer-coated metal NPs, cellulose nanocrystals, and silver NPs, among others, have demonstrated efficacy in enhancing the process of water purification. The utilization of environmentally friendly NPs presents a viable option for enhancing the efficiency and sustainability of water pollution eradication. The present review delves into the topic of biomass, its origins, and the methods by which it can be transformed into NPs utilizing an environmentally sustainable approach. The present study will examine the utilization of greener NPs in contemporary wastewater and desalination technologies.

Cu Regulating the Bifunctional Activity of Co-O Sites for the High-Performance Rechargeable Zinc-Air Battery.

The rational design of cost-effective and highly active electrocatalysts becomes the crucial energy storage technology to boost the kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER), which hinders the large-scale application of metal-air batteries under the situation of increasingly pressing energy anxiety. Herein, the Co-based ZIF introduced the moderate amount of Cu2+-derived Cu/Co metal nanoparticles (NPs) embedded in carbon frameworks after high-temperature calcination. The Co-O bond on the surface of Co nanoparticles is modulated by adjacent Cu nanoparticles with the surface Cu-O bonds. The resulted increase of the Co2+/Co3+ ratio in 0.1CuCo-NC enhances the ORR/OER bifunctional catalytic kinetics along with the ΔE of 0.639 V. In situ Raman spectra of the catalyst on the three-electrode system as well as in the driven zinc-air battery (ZAB) show that the Co-O active sites regulated by Cu nanoparticles with Cu-O bonds maintain a periodic lattice expansion and compression during discharging and charging. The zinc-air battery based on 0.1CuCo-NC has a peak power density of up to 198.3 mW cm-2, a mass-specific capacity of 798.2 mAh g-1, and a cycling stability of 923 h at room temperature. This work makes up the research gap of a Co-based metal-organic framework (MOF)-derived catalyst regulated by a transition metal.

Dependent scattering and plasmon coupling in concentrated suspensions of optically hard nanoparticles

This study establishes the accuracy and efficacy of the recently developed radiative transfer with reciprocal transactions (R2T2) method for quickly simulating radiation transfer through concentrated thick suspensions of optically hard nanoparticles featuring a large mismatch in refractive and/or absorption indices compared with their surrounding medium. Concentrated suspensions of optically hard nanoparticles exhibit strong light scattering and dependent scattering effects including both near-field interactions among particles and interferences of scattered waves in the far-field. Concentrated suspensions of metallic nanoparticles also exhibit plasmon coupling effect that leads to widening of absorption peak and red-shift in the peak surface plasmon resonance wavelength. However, predicting these complex interactions between EM waves and particles in thick and concentrated suspensions by explicitly solving Maxwell's equations is computationally intensive, if not impossible. Conventional solutions like Lorenz–Mie theory combined with independent scattering approximation do not account for dependent scattering and plasmon coupling. Furthermore, the dense medium radiative transfer theory is a far-field approximation that does not account for near-field effects, leading to significant errors in predictions, as illustrated in this study. By contrast, the R2T2 method's predictions showed excellent agreement with the solutions of Maxwell's equations obtained using the superposition T-matrix method for thin films containing optically hard particles. The method also rigorously accounted for multiple scattering as well as plasmon coupling in thick concentrated suspensions. These results could facilitate the design of plasmonic suspensions used in various energy and environmental applications.

Eco-friendly biogenic silver nanoparticles: synthesis, characterization and biological applications

AbstractRecent developments in nanotechnology and nanoscience in all phases of human life have radically altered the diagnosis, treatment, and prevention of numerous diseases. Silver nanoparticles (Ag-NPs) have been among the most dynamic, and Several metallic nanoparticles developed for biological uses include some beautiful nanomaterials. Ag-NPs have played a pivotal role in nanotechnology and nanoscience, mostly nanomedicine. In this work, Ficus carica leaf extract was utilized to create silver nanoparticles using a straightforward procedure. This study explored the reduction of silver ions by F. carica leaf extract in the solution. UV–Vis spectroscopy, XRD analysis, and STEM characterize prepared biogenic Ag-NPs. Afterward, antibacterial and antibiofilm properties were investigated. The images obtained from STEM analysis surveyed that the NP sizes ranged from 11 to 20 nm. Ag-NPs demonstrated antibacterial and antibiofilm activities against all tested Gram-positive and Gram-negative bacteria strains. It has been indicated that Ag-NPs have inhibitory potency against collagenase activity. Ag-NPs exhibited anticancer activity in the HeLa cell line, and the IC50 value was calculated as 8.403 μg/mL. In this study, it has been shown that the synthesis method is environmentally friendly, fast, safe, and easy to use.

The role of Cu species in the regeneration of a coked Cu/BEA zeolite catalyst

Active site occlusion by carbon species, often referred to as coke, is a common deactivation mechanism for heterogeneous catalysts. While it is known that transition metals can lower the temperature required for oxidative coke removal, the roles of ionic species and metal nanoparticles in coke removal are not well understood. This work aims to differentiate how ionic and nanoparticle Cu sites catalyze oxidative regeneration of a coked beta (BEA) zeolite catalyst. This was accomplished by synthesizing catalysts containing exclusively CuOx nanoparticles (NPs) or Cu2+ ions supported on BEA, physically mixing Cu/BEA with a coked BEA catalyst, and monitoring coke removal using in situ spectroscopy. Our results point to an improved combustion activity for CuOx NPs relative to Cu2+ ions, especially in the combustion of graphitic-type coke species. This improved understanding of coke combustion in transition metal containing catalysts informs strategies to improve catalyst regeneration, thereby increasing operational lifetimes.

Unveiling the potential of photodynamic therapy with nanocarriers as a compelling therapeutic approach for skin cancer treatment: current explorations and insights.

Skin carcinoma is one of the most prevalent types of carcinomas. Due to high incidence of side effects in conventional therapies (radiotherapy and chemotherapy), photodynamic therapy (PDT) has gained huge attention as an alternate treatment strategy. PDT involves the administration of photosensitizers (PS) to carcinoma cells which produce reactive oxygen species (ROS) on irradiation by specific wavelengths of light that result in cancer cells' death via apoptosis, autophagy, or necrosis. Topical delivery of PS to the skin cancer cells at the required concentration is a challenge due to the compounds' innate physicochemical characteristics. Nanocarriers have been observed to improve skin permeability and enhance the therapeutic efficiency of PDT. Polymeric nanoparticles (NPs), metallic NPs, and lipid nanocarriers have been reported to carry PS successfully with minimal side effects and high effectiveness in both melanoma and non-melanoma skin cancers. Advanced carriers such as quantum dots, microneedles, and cubosomes have also been addressed with reported studies to show their scope of use in PDT-assisted skin cancer treatment. In this review, nanocarrier-aided PDT in skin cancer therapies has been discussed with clinical trials and patents. Additionally, novel nanocarriers that are being investigated in PDT are also covered with their future prospects in skin carcinoma treatment.

Performance enhancement of rechargeable zinc-air battery through synergistic ex-solution of multi-component Pt/CoWO4-x catalysts

Advancing zinc-air battery (ZAB) technology necessitates the development of air cathode electrocatalyst systems that demonstrate high reactivity and stability. We introduce a novel method to fabricate a robust catalyst-support hybrid. This hybrid comprises Co-doped Pt nanoparticles (NPs) anchored on metal oxide (Ex-PtCoWO) nanofibers (NFs), synthesized via electrospinning followed by selective metal ex-solution. Controlling the ex-solution of metal NPs leads to a highly active and stable oxygen reduction reaction (ORR). Moreover, the three-dimensional CoWO4-x NFs network enhances the surface exposure of ex-solved metal NPs, thereby aiding both selective ex-solution and the provision of active sites for the oxygen evolution reaction (OER) during ZAB recharge. The Ex-PtCoWO NF exhibits an ORR half-wave potential of 0.89 V and an OER potential of 1.69 V at 10 mA cm−2 in alkaline media. ZABs utilizing Ex-PtCoWO NF show an extended cycle life of over 240 h with reduced charge-discharge polarization, compared to commercial catalysts.