Metal-ligand Bond Research Articles

Reducing Voltage Hysteresis in Li-Rich Sulfide Cathodes by Incorporation of Mn.

Conventional intercalation-based cathode materials in Li-ion batteries are based on charge compensation of the redox-active cation and can only intercalate one mole of electron per formula unit. Anion redox, which employs the anion sublattice to compensate charge, is a promising way to achieve multielectron cathode materials. Most anion redox materials still face the problems of slow kinetics and large voltage hysteresis. One potential solution to reduce voltage hysteresis is to increase the covalency of the metal-ligand bonds. By substituting Mn into the electrochemically inert Li1.33Ti0.67S2 (Li2TiS3), anion redox can be activated in the Li1.33-2y/3Ti0.67-y/3Mn y S2 (y = 0-0.5) series. Not only do we observe substantial anion redox, but the voltage hysteresis is significantly reduced, and the rate capability is dramatically enhanced. The y = 0.3 phase exhibits excellent rate and cycling performance, maintaining 90% of the C/10 capacity at 1C, which indicates fast kinetics for anion redox. X-ray absorption spectroscopy (XAS) shows that both the cation and anion redox processes contribute to the charge compensation. We attribute the drop in hysteresis and increase in rate performance to the increased covalency between the metal and the anion. Electrochemical signatures suggest the anion redox mechanism resembles holes on the anion, but the S K-edge XAS data confirm persulfide formation. The mechanism of anion redox shows that forming persulfides can be a low hysteresis, high rate capability mechanism enabled by the appropriate metal-ligand covalency. This work provides insights into how to design cathode materials with anion redox to achieve fast kinetics and low voltage hysteresis.

Exploring the bonding and extraction separation effects of N donor ligands with different skeletons on Am(III) and Eu(III)

Designing ligands for effective separation of actinide(III)/lanthanide(III) is one of the key issues in the treatment of spent nuclear fuel. However, due to the chemical similarity of trivalent actinides and lanthanides, their separation faces a great challenge in the reprocessing of spent nuclear fuel. Nitrogen donor extractants are considered as promising reagents for separation of trivalent actinides and lanthanides. To the best of our knowledge, the pre-organized structure of the ligand has a strong influence on the extraction separation capacity. In this work, we designed four N-donor ligands (L1 and L2 with pyridine and bipyridine skeletons, respectively, and L3 and L4 both with phenanthroline skeletons) with different pre-organized structures and investigated their selective extraction for Am(III) and Eu(III) by using scalar relativistic density functional theory (DFT). The absolute minimum ESP values of these ligands and the higher HOMO level suggest that the ligand L2 may have a stronger affinity for Am(III)/Eu(III) ions than other ligands. The three average bond lengths of each complex indicate that the Am(III) and Eu(III) ions have larger bond lengths with N2 atoms than with N1 atoms. Various theoretical approaches have been used to evaluate the properties of the four ligands as well as the coordination structures, bonding properties and thermodynamic properties of the complexes of the four ligands with Am(III) and Eu(III). The WBIs, QTAIM, NBO, DOS and EDA analysis indicate that the metal–ligand bonds are mainly ionic in character, the Am-N bond has more covalency than the Eu-N bond because the Am 5f orbitals are more involved in bonding with ligand than Eu 4f orbitals. According to the extended transition state and natural orbital chemical valence theory (ETS-NOCV) analysis, electrons are obviously transferred from the lone pair of the ligand N atom to the hybrid s, d and f orbitals of the metal ion. The thermodynamic results show that the four ligands can coordinate well with the Am and Eu ions, and also have suitable separation capacity for Am and Eu. Among the four ligands, the L2 and L3 ligands have the strongest coordination ability for metals and the best extraction separation effect for Am and Eu. It can be seen that the bridging skeleton of the ligand and the number of N atoms on the five-membered ring and also different organic solvents have obvious effects on the extraction and separation capacity of the ligand. This study provides a theoretical basis for the efficient separation of Am(III)/Eu(III) by adjusting the preorganization level of ligands, and provides a theoretical basis for the design and screening of ligands by preorganization.

A tetrahedral neptunium(V) complex.

Neptunium is an actinide element sourced from anthropogenic production, and, unlike naturally abundant uranium, its coordination chemistry is not well developed in all accessible oxidation states. High-valent neptunium generally requires stabilization from at least one metal-ligand multiple bond, and departing from this structural motif poses a considerable challenge. Here we report a tetrahedral molecular neptunium(V) complex ([Np5+(NPC)4][B(ArF5)4], 1-Np) (NPC = [NPtBu(pyrr)2]-; tBu = C(CH3)3; pyrr = pyrrolidinyl (N(C2H4)2); B(ArF5)4 = tetrakis(2,3,4,5,6-pentafluourophenyl)borate). Single-crystal X-ray diffraction, solution-state spectroscopy and density functional theory studies of 1-Np and the product of its proton-coupled electron transfer (PCET) reaction, 2-Np, demonstrate the unique bonding that stabilizes this reactive ion and establishes the thermochemical and kinetic parameters of PCET in a condensed-phase transuranic complex. The isolation of this four-coordinate, neptunium(V) complex reveals a fundamental reaction pathway in transuranic chemistry.

Coordination cages integrated into swelling poly(ionic liquid)s for guest encapsulation and separation

Coordination cages have been widely reported to bind a variety of guests, which are useful for chemical separation. Although the use of cages in the solid state benefits the recycling, the flexibility, dynamicity, and metal-ligand bond reversibility of solid-state cages are poor, preventing efficient guest encapsulation. Here we report a type of coordination cage-integrated solid materials that can be swelled into gel in water. The material is prepared through incorporation of an anionic FeII4L6 cage as the counterion of a cationic poly(ionic liquid) (MOC@PIL). The immobilized cages within MOC@PILs have been found to greatly affect the swelling ability of MOC@PILs and thus the mechanical properties. Importantly, upon swelling, the uptake of water provides an ideal microenvironment within the gels for the immobilized cages to dynamically move and flex that leads to excellent solution-level guest binding performances. This concept has enabled the use of MOC@PILs as efficient adsorbents for the removal of pollutants from water and for the purification of toluene and cyclohexane. Importantly, MOC@PILs can be regenerated through a deswelling strategy along with the recycling of the extracted guests.

Mechanisms of Ligand Hyperfine Coupling in Transition-Metal Complexes: σ and π Transmission Pathways.

Theoretical interpretation of hyperfine interactions was pioneered in the 1950s-1960s by the seminal works of McConnell, Karplus, and others for organic radicals and by Watson and Freeman for transition-metal (TM) complexes. In this work, we investigate a series of octahedral Ru(III) complexes with aromatic ligands to understand the mechanism of transmission of the spin density from the d-orbital of the metal to the s-orbitals of the ligand atoms. Spin densities and spin populations underlying ligand hyperfine couplings are analyzed in terms of π-conjugative or σ-hyperconjugative delocalization vs spin polarization based on symmetry considerations and restricted open-shell vs unrestricted wave function analysis. The transmission of spin density is shown to be most efficient in the case of symmetry-allowed π-conjugative delocalization, but when the π-conjugation is partially or fully symmetry-forbidden, it can be surpassed by σ-hyperconjugative delocalization. Despite a lower spin population of the ligand in σ-hyperconjugative transmission, the hyperfine couplings can be larger because of the direct involvement of the ligand s-orbitals in this delocalization pathway. We demonstrate a quantitative correlation between the hyperfine couplings of aromatic ligand atoms and the characteristics of the metal-ligand bond modulated by the trans substituent, a hyperfine trans effect.

Electron Deficient Ir-O Bonds Promote Heterogeneous Ir-Catalyzed Anti-Markovnikov Hydroboration of Alkenes under Mild Neat Conditions.

Tuning electronic characteristics of metal-ligand bonds based on reaction pathways to achieve efficient catalytic processes has been widely studied and proven to be feasible in homogeneous catalysis, but it is scarcely investigated in heterogeneous catalysis. Herein, we demonstrate the regulation of the electronic configuration of Ir-O bonds in an Ir single-atom catalyst according to the borane activation mechanism. Ir-O bonds in Ir1/Ni(OH)x are found to be more electron-poor than those in Ir1/NiOx. Despite the mild solvent-free conditions and ambient temperature, Ir1/Ni(OH)x exhibits outstanding performance for the hydroboration of alkenes, furnishing the desired alkylboronic esters with a turnover frequency value of ≤3060 h-1 and 99% anti-Markovnikov selectivity, which is significantly better than that of Ir1/NiOx (42 h-1). It is further proven that the more electron-poor Ir-O bonds as active centers are more oxidative and so benefit the activation of the H-B bond in the reductive pinacolborane.

Disentangling the ligand and electronic structure in KVPO4F1-xOx positive electrode materials by valence-to-core X-ray emission spectroscopy

Understanding the intricate crystal structure of polyanionic positive electrode materials is essential for elucidating the mechanisms involved during cycling and predicting the working potential of the electrode. To achieve this goal, a clear comprehension of how the coordination environment of the transition metal ion influences the ionicity/covalency of the metal-ligand bonds is necessary. Yet, discriminating these ligands poses challenges due to the limited sensitivity to light elements of common characterization techniques such as X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) analysis. To address this issue, we employed valence-to-core Kβ X-ray emission spectroscopy combined with ab initio modelling and conducted a systematic investigation using potassium vanadium oxyfluoride phosphate compounds with the general formula KVPO4F1-xOx (x = 0, 0.25, 0.5, 0.75, 1). Our approach allows distinguishing the contributions of VF, VO, and VO bonds at the Kβ" region, with intensities highly correlated to the F− and O2− anion composition. Additionally, the evolution of the features at the Kβ2,5 region is highly correlated to the presence of short VO bonds, strongly influencing the electrode potential of the material. Density of state (DOS) analysis based on ab initio modelling of the end member compounds KVPO4F and KVOPO4 further supports the existence of VF and VO bonding through the mixing of F/O p-DOS with V d-DOS. Overall, we present a detailed and reliable approach for understanding the occupied electronic states of the bulk material, proving valuable for a thorough comprehension of the structure of positive electrode materials in batteries.

Strong Second-Harmonic Generation Induced by a Triphenylamine-Based Bismuth-Organic Framework for Photocatalytic Activity Enhancement.

Taking advantage of the well-defined geometry of metal centers and highly directional metal-ligand coordination bonds, metal-organic frameworks (MOFs) have emerged as promising candidates for nonlinear optical (NLO) materials. In this work, taking a photoresponsive carboxylate triphenylamine derivative as an organic ligand, a bismuth-based MOF, Bi-NBC, NBC = 4',4‴,4‴″-nitrilotris(([1,1'-biphenyl]-4-carboxylic acid)) is obtained. Structure determination reveals that it is a potential NLO material derived from its noncentrosymmetric structure, which is finally confirmed by its rarely strong second harmonic generation (SHG) effect. Theoretical calculations reveal that the potential difference around Bi atoms is large; therefore, it leads to a strong local built-in electric field, which greatly facilitates the charge separation and transfer and finally improves the photocatalytic performance. Our results provide a reference for the exploration of MOFs with NLO properties.

Expanding the Scope of Aluminum Chemistry with Noninnocent Ligands.

ConspectusAluminum is the most abundant metal in the earth's crust at 8%, and it is also widely available domestically in many countries worldwide, which ensures a stable supply chain. To further the applications of aluminum (Al), such as in catalysis and electronic and energy storage materials, there has been significant interest in the synthesis and characterization of new Al coordination compounds that can support electron transfer (ET) and proton transfer (PT) chemistry. This has been achieved using redox and chemically noninnocent ligands (NILs) combined with the highly stable M(III) oxidation state of Al and in some cases the heavier group 13 ions, Ga and In.When ligands participate in redox chemistry or facilitate the breaking or making of new bonds, they are often termed redox or chemically noninnocent, respectively. Al(III) in particular supports rich ligand-based redox chemistry because it is so redox inert and will support the ligand across many charge and protonation states without entering into the reaction chemistry. To a lesser extent, we have reported on the heavier group 13 elements Ga and In, and this chemistry will also be included in this Account, where available.This Account is arranged into two technical sections, which are (1) Structures of Al-NIL complexes and (2) Reactivity of Al-NIL complexes. Highlights of the research work include reversible redox chemistry that has been enabled by ligand design to shut down radical coupling pathways and to prevent loss of H2 from unsaturated ligand sites. These reversible redox properties have in turn enabled the characterization of Class III electron delocalization through Al when two NIL are bound to the Al(III) in different charge states. Characterization of the metalloaromatic character of square planar Al and Ga complexes has been achieved, and characterization of the delocalized electronic structures has provided a model within which to understand and predict the ET and PT chemistry of the NIL group 13 compounds. The capacity of Al-NIL complexes to perform ET and PT has been employed in reactions that use ET or PT reactivity only or in reactions where coupled ET/PT affords hydride transfer chemistry. As an example, ligand-based PT reactions initiate metal-ligand cooperative bond activation pathways for catalysis: this includes acceptorless dehydrogenation of formic acid and anilines and transfer hydrogenation chemistry. In a complementary approach, ligand based ET/PT chemistry has been used in the study of dihydropyridinate (DHP-) chemistry where it was shown that N-coordination of group 13 ions lowers kinetic barriers to DHP- formation. Taken together, the discussion presented herein illustrates that the NIL chemistry of Al(III), and also of Ga(III) and In(III) holds promise for further developments in catalysis and energy storage.

N-Heterocyclic Carbene to Actinide d-Based π-bonding Correlates with Observed Metal-Carbene Bond Length Shortening Versus Lanthanide Congeners.

Comparison of bonding and electronic structural features between trivalent lanthanide (Ln) and actinide (An) complexes across homologous series' of molecules can provide insights into subtle and overt periodic trends. Of keen interest and debate is the extent to which the valence f- and d-orbitals of trivalent Ln/An ions engage in covalent interactions with different ligand donor functionalities and, crucially, how bonding differences change as both the Ln and An series are traversed. Synthesis and characterization (SC-XRD, NMR, UV-vis-NIR, and computational modeling) of the homologous lanthanide and actinide N-heterocyclic carbene (NHC) complexes [M(C5Me5)2(X)(IMe4)] {X = I, M = La, Ce, Pr, Nd, U, Np, Pu; X = Cl, M = Nd; X = I/Cl, M = Nd, Am; and IMe4 = [C(NMeCMe)2]} reveals consistently shorter An-C vs Ln-C distances that do not substantially converge upon reaching Am3+/Nd3+ comparison. Specifically, the difference of 0.064(6) Å observed in the La/U pair is comparable to the 0.062(4) Å difference observed in the Nd/Am pair. Computational analyses suggest that the cause of this unusual observation is rooted in the presence of π-bonding with the valence d-orbital manifold in actinide complexes that is not present in the lanthanide congeners. This is in contrast to other documented cases of shorter An-ligand vs Ln-ligand distances, which are often attributed to increased 5f vs 4f radial diffusivity leading to differences in 4f and 5f orbital bonding involvement. Moreover, in these traditional observations, as the 5f series is traversed, the 5f manifold contracts such that by americium structural studies often find no statistically significant Am3+vs Nd3+ metal-ligand bond length differences.

Hidden descriptors: Using statistical treatments to generate better descriptor sets

The application of artificial intelligence to chemistry usually focuses on the identification of good correlations between descriptors and a given property of interest. The descriptors often come from arbitrary sets, with the implicit assumption that the evaluation of a sufficiently wide range of descriptors will lead to a satisfactory choice. Recent work in our group has focused on applying statistical analysis to large amounts of DFT results with the goal of finding optimal descriptor sets for a given property, which we label as hidden descriptors. This article briefly discusses this treatment and the chemical knowledge that has been gained through its application in two different domains: metal-ligand bond strength in transition metal complexes, and energy barriers in bimolecular nucleophilic substitution reactions.

Designing of a Multifunctional 3D-Printed Biomimetic Theragenerative Aerogel Scaffold via Mussel-Inspired Chemistry: Bioactive Glass Nanofiber-Incorporated Self-Assembled Silk Fibroin with Antibacterial, Antiosteosarcoma, and Osteoinductive Properties.

Biomaterial-mediated bone tissue engineering (BTE) offers an alternative, interesting approach for the restoration of damaged bone tissues in postsurgery osteosarcoma treatment. This study focused on synthesizing innovative composite inks, integrating self-assembled silk fibroin (SF), tannic acids (TA), and electrospun bioactive glass nanofibers 70SiO2-25CaO-5P2O5 (BGNF). By synergistically combining the unique characteristics of these three components through self-assembly and microextrusion-based three-dimensional (3D) printing, our goal was to produce durable and versatile aerogel-based 3D composite scaffolds. These scaffolds were designed to exhibit hierarchical porosity along with antibacterial, antiosteosarcoma, and bone regeneration properties. Taking inspiration from mussel foot protein attachment chemistry involving the coordination of dihydroxyphenylalanine (DOPA) amino acids with ferric ions (Fe3+), we synthesized a tris-complex catecholate-iron self-assembled composite gel. This gel formation occurred through the coordination of oxidized SF (SFO) with TA and polydopamine-modified BGNF (BGNF-PDA). The dynamic nature of the coordination ligand-metal bonds within the self-assembled SFO matrix provided excellent shear-thinning properties, allowing the SFO-TA-BGNF complex gel to be extruded through a nozzle, facilitating 3D printing into scaffolds with outstanding shape fidelity. Moreover, the developed composite aerogels exhibited multifaceted features, including NIR-triggered photothermal antibacterial and in vitro photothermal antiosteosarcoma properties. In vitro studies showcased their excellent biocompatibility and osteogenic features as seeded cells successfully differentiated into osteoblasts, promoting bone regeneration in 21 days. Through comprehensive characterizations and biological validations, our antibacterial scaffold demonstrated promise as an exceptional platform for concurrent bone regeneration and bone cancer therapy, setting the stage for their potential clinical application.

Mechanically Robust, Durable, and Multifunctional Hyper-Crosslinked Elastomer Based on Metal-Organic-Cluster Crosslinker: The Role of Topological Structure.

Polymer materials formed by conventional metal-ligand bonds have very low branch functionality, the crosslinker of such polymer usually consists of 2-4 polymer chains and a single metal ion. Thus, these materials are weak, soft, humidity-sensitive, and unable to withstand their shape under long-term service. In this work, a new hyperbranched metal-organic cluster (MOC) crosslinker containing up to 16 vinyl groups is prepared by a straightforward coordination reaction. Compared with the current typical synthesis of metal-organic cages (MOCs) or metal-organic-polyhedra (MOP) crosslinkers with complex operations and low yield, the preparation of the MOC is simple and gram-scale. Thus, MOC can serve as a high-connectivity crosslinker to construct hyper-crosslinked polymer networks. The as-prepared elastomer exhibits mechanical robustness, creep-resistance, and humidity-stability. Besides, the elastomer possesses self-healing and recyclability at mild condition as well as fluorescence stability. These impressive comprehensive properties are proven to originate from the hyper-crosslinked topological structure and microphase-separated morphology. The MOC-driven hyper-crosslinked elastomers provide a new solution for the construction of mechanically robust, durable, and multifunctional polymers.

Research on the screening and inhibition mechanism of angiotensin I-converting enzyme (ACE) inhibitory peptides from tuna dark muscle

The rapid screening of angiotensin I-converting enzyme (ACE) inhibitory peptides (ACEIPs) from protein hydrolysates remains a challenge in current researches. The current study presents the development of an efficient affinity medium (AOPAN–ACE) consisting of ACE immobilized on the surface of electrostatically spun polyacrylonitrile nanofibrous membranes for the efficient screening of ACEIPs. The application of this affinity medium followed by liquid chromatography–tandem mass spectrometry analysis resulted in the successful screening and identification of 60 potential ACEIPs from protein hydrolysates of tuna dark muscle. Notably, the application of PeptideRanker, pLM4ACE, and molecular docking approaches resulted in the screening and identification of a novel ACEIP FPPDVA. Furthermore, the peptide FPPDVA was synthesized using the solid-phase method, and its IC50 value on ACE was determined to be 87.11 ± 1.02 μM. Molecular docking analysis suggested that the ACEIP of the peptide FPPDVA is attributable to the formation of hydrogen bonds with the S1 active site (Ala354 and Tyr523) of ACE and metal–ligand bonds with Zn2+. In addition, molecular dynamics simulations revealed that the peptide FPPDVA formed a stable complex with ACE and was consistently localized within the active pocket of ACE over a simulation duration of 100 ns without being displaced from the active site. Lineweaver–Burk analysis further confirmed that the peptide FPPDVA exhibited mixed mode of inhibition against ACE. Overall, the affinity medium developed in the current study is potentially useful for highly efficient screening of ACEIPs, and the novel ACEIP FPPDVA identified herein is a promising functional food ingredient for antihypertensive application.

Metal complexes with thiazyl chloride: single or double bond?

Many metal complexes are known with thiazyl chloride as a ligand. In some complexes, the structure of the metal–ligand bond can be described as M=N=S–Cl, whereas in other cases the structure is described as M–N≡S–Cl. The metal–nitrogen bond length goes from 1.76 to 2.28 Å. In this study, density functional theory was used to search for the reasons for these differences, taking into account both mononuclear and binuclear complexes.

Effect of interfacial sacrificial bonds on the vulcanization and mechanical properties of styrene butadiene rubber/talcum powder composites

AbstractTalcum powder (Talc) contains large amounts of silica; however, its poor surface compatibility with diene rubber makes it difficult to develop its application in styrene‐butadiene rubber (SBR). Herein, a method to enhance the compatibility of Talc with SBR via interfacial sacrificial bonds of 4‐vinylpyridine and Mg2+/Zn2+ is proposed. Poly(isoprene‐co‐4‐vinylpyridine) copolymers, designated PIPVP‐10 and PIPVP‐20, were synthesized via reversible addition‐fragmentation chain transfer polymerization. PM1‐Talc and PM2‐Talc were obtained by spraying PIPVP‐10 and PIPVP‐20 solutions onto the Talc surface, followed by drying. During thermal vulcanization, the double bonds in the copolymers can be grafted directly onto the rubber skeleton. The vulcanization rates of the SBR/PM1‐Talc and SBR/PM2‐Talc complexes were accelerated by 65% and 77%, respectively, compared with that of SBR/Talc. Simultaneously, the interfacial interaction between SBR and Talc is enhanced owing to the formation of metal–ligand bonds between pyridine and Mg2+/Zn2+. As a result, the tensile strengths of SBR/PM1‐Talc and SBR/PM2‐Talc are 5.8 and 7.9 MPa, 65% and 127% higher than that of SBR/Talc (3.5 MPa).

Unveiling Mechanistic Complexity in Manganese-Catalyzed C-H Bond Functionalization Using IR Spectroscopy Over 16 Orders of Magnitude in Time.

ConspectusAn understanding of the mechanistic processes that underpin reactions catalyzed by 3d transition metals is vital for their development as potential replacements for scarce platinum group metals. However, this is a significant challenge because of the tendency of 3d metals to undergo mechanistically diverse pathways when compared with their heavier congeners, often as a consequence of one-electron transfer reactions and/or intrinsically weaker metal-ligand bonds. We have developed and implemented a new methodology to illuminate the pathways that underpin C-H bond functionalization pathways in reactions catalyzed by Mn-carbonyl compounds. By integrating measurements performed on catalytic reactions with in situ reaction monitoring and state-of-the-art ultrafast spectroscopic methods, unique insight into the mode of action and fate of the catalyst have been obtained.Using a combination of time-resolved spectroscopy and in situ low-temperature NMR studies, we have shown that photolysis of manganese-carbonyl precatalysts results in rapid (<5 ps) CO dissociation─the same process that occurs under thermal catalytic conditions. This enabled the detection of the key states relevant to catalysis, including solvent and alkyne complexes and their resulting transformation into manganacycles, which results from a migratory insertion reaction into the Mn-C bond. By systematic variation of the substrates (many of which are real-world structurally diverse substrates and not simple benchmark systems) and quantification of the resulting rate constants for the insertion step, a universal model for this migratory insertion process has been developed. The time-resolved spectroscopic method gave insight into fundamental mechanistic pathways underpinning other aspects of modern synthetic chemistry. The most notable was the first direct experimental observation of the concerted metalation deprotonation (CMD) mechanism through which carboxylate groups are able to mediate C-H bond activation at a metal center. This step underpins a host of important synthetic applications. This study demonstrated how the time-resolved multiple probe spectroscopy (TRMPS) method enables the observation of mechanistic process occurring on time scales from several picoseconds through to μs in a single experiment, thereby allowing the sequential observation of solvation, ligand substitution, migratory insertion, and ultimate protonation of a Mn-C bond.These studies have been complemented by an investigation of the "in reaction flask" catalyst behavior, which has provided additional insight into new pathways for precatalyst activation, including evidence that alkyne C-H bond activation may occur before heterocycle activation. Crucial insight into the fate of the catalyst species showed that excess water played a key role in deactivation to give higher-order hydroxyl-bridged manganese carbonyl clusters, which were independently found to be inactive. Traditional in situ IR and NMR spectroscopic analysis on the second time scale bridges the gap to the analysis of real catalytic reaction systems. As a whole, this work has provided unprecedented insight into the processes underpinning manganese-catalyzed reactions spanning 16 orders of magnitude in time.

Unlocking Precision Docking for Metalloproteins.

Metalloproteins play a fundamental role in molecular biology, contributing to various biological processes. However, the discovery of high-affinity ligands targeting metalloproteins has been delayed due, in part, to a lack of suitable tools and data. Molecular docking, a widely used technique for virtual screening of small-molecule ligand interactions with proteins, often faces challenges when applied to metalloproteins due to the particular nature of the ligand metal bond. To address these limitations associated with docking metalloproteins, we introduce a knowledge-driven docking approach known as "metalloprotein bias docking" (MBD), which extends the AutoDock Bias technique. We assembled a comprehensive data set of metalloprotein-ligand complexes from 15 different metalloprotein families, encompassing Ca, Co, Fe, Mg, Mn, and Zn metal ions. Subsequently, we conducted a performance analysis of our MBD method and compared it to the conventional docking (CD) program AutoDock4, applied to various metalloprotein targets within our data set. Our results demonstrate that MBD outperforms CD, significantly enhancing accuracy, selectivity, and precision in ligand pose prediction. Additionally, we observed a positive correlation between our predicted ligand free energies and the corresponding experimental values. These findings underscore the potential of MBD as a valuable tool for the effective exploration of metalloprotein-ligand interactions.

Fe(II) coordination transition regulates reductive dechlorination: The overlooked abiotic role of lactate

The coordination environment of Fe(II) significantly affect the reductive reactivity of Fe(II). Lactate is a common substrate for enhancing microbial dechlorination, but its effect on abiotic Fe(II)-driven reductive dechlorination is largely ignored. In this study, the structure-reactivity relationship of Fe(II) is investigated by regulating the ratio of lactate:Fe(II). This work shows that lactate-Fe(II) complexing enhances the abiotic Fe(II)-driven reductive dechlorination with the optimum lactate:Fe(II) ratio of 10:20. The formed hydrogen bond (Fe-OH∙∙∙∙∙∙O = C-) and Fe-O-C metal-ligand bond result in a reduced Fe(II) coordination number from six to four, which lead to the transition of Fe(II) coordination geometry from octahedron to tetrahedron/square planar. Coordinatively unsaturated Fe(II) results in the highest reductive dechlorination reactivity towards carbon tetrachloride (k1 = 0.26254 min−1). Excessive lactate concentration (> 10 mM) leads to an increased Fe(II) coordination number from four to six with a decreased reductive reactivity. Electrochemical characterization and XPS results show that lactate-Fe(II)-I (C3H5O3−:Fe(II) = 10:20) has the highest electron-donating capacity. This study reveals the abiotic effect of lactate on reductive dechlorination in a subsurface-reducing environment where Fe(II) is usually abundant.

Reinforced, self-healing, recyclable rubber materials based on multiple dynamic bond constructs crosslinked with chemical groups

Enhancing the mechanical attributes of traditional rubber, while simultaneously imparting superior self-healing and recyclability, remains a formidable task within the realm of polymer science. In this study, we introduce, for the inaugural time, the utilization of metal–ligand interactions to amalgamate chemical cross-linking sites within a styrene-butadiene rubber matrix. This approach facilitates the creation of a fortified, self-healing, and recyclable rubber composite, interconnected by an array of dynamic bonds within a singular chemical entity. This chemical assembly engenders a microphase-separated architecture that exhibits reinforcement and resistance to creep. In addition, the presence of reversible oxime-carbamate and metal–ligand bonds bestow the rubber composites with remarkable self-healing and recyclability. Notably, the self-healing efficiency reached an impressive 87%, while the recyclability retention hovered between 85 and 91% (in terms of tensile strength) post multiple reprocesses. This research paves a novel avenue for the fabrication of rubber composites that are robust, self-healing, and recyclable.