Metal Exchange Research Articles

Third-Order Nonlinear Optical Modulation Behavior of Photoresponsive Bimetallic MOFs.

Bimetallic metal-organic frameworks (MOFs) capable of sensing external stimuli will provide more possibilities for further regulating third-order nonlinear optical (NLO) properties. In this work, we synthesized bimetallic MOFs (ZnCu-MOF and ZnCd-MOF) through central metal exchange using a photoresponsive Zn-MOF as a precursor. Compared with Zn-MOF, both ZnCu-MOF and ZnCd-MOF exhibit significantly enhanced third-order NLO absorption properties. This is mainly attributed to the introduction of metal ions with different electron configurations that can adjust the bandgap of MOFs and enhance electron delocalization, thus promoting electron transfer. Interestingly, the bimetallic MOFs show a transition from reverse saturation absorption (RSA) to saturation absorption (SA) after exposure to ultraviolet irradiation, as they retain the properties of directional photogenerated electron transfer. Photoresponsive bimetallic MOFs not only have the effect of bimetallic modulation of electronic structures but also have the characteristics of photoinduced electron transfer, exhibiting diversified optical properties. These findings provide a novel method for the development of multifunctional NLO materials.

Ligand- and metal-exchange reactions of robust nickel complexes with pentagonal bipyramidal structures.

The coordination chemistries of transition metal complexes with pentagonal bipyramidal geometries were investigated, and the highly stable nature of a cyclic pentapyridyl ligand was disclosed. A NiCl2 complex with the pentapyridyl ligand was found to be stable toward water and acidic conditions. The stable complex underwent ligand-exchange reactions with nucleophilic reagents, and a series of pentagonal bipyramidal complexes with different apical ligands was prepared. Crystallographic analyses with the aid of theoretical calculations revealed that the complexes were constructed by electrostatic threading of a divalent linear nickel complex into the ring of the neutral, cyclic pentapyridyl, which resulted in robust water- and acid-resistant complexes with unique pentagonal bipyramidal structures. A reductive metal exchange reaction was then discovered, which enabled "linear divalent metal + electrostatic ring" formulations with different metal atoms.

Irreversible Trace Metal Binding to Goethite Controlled by the Ion Size.

The dynamics of trace metals at mineral surfaces influence their fate and bioaccessibility in the environment. Trace metals on iron (oxyhydr)oxide surfaces display adsorption-desorption hysteresis, suggesting entrapment after aging. However, desorption experiments may perturb the coordination environment of adsorbed metals, the distribution of labile Fe(III), and mineral aggregation properties, influencing the interpretation of labile metal fractions. In this study, we investigated irreversible binding of nickel, zinc, and cadmium to goethite after aging times of 2-120 days using isotope exchange. Dissolved and adsorbed metal pools exchange rapidly, with half times <90 min, but all metals display a solid-associated fraction inaccessible to isotope exchange. The size of this nonlabile pool is the largest for nickel, with the smallest ionic radius, and the smallest for cadmium, with the largest ionic radius. Spectroscopy and extractions suggest that the irreversibly bound metals are incorporated in the goethite structure. Rapid exchange of labile solid-associated metals with solution demonstrates that adsorbed metals can sustain the dissolved pool in response to biological uptake or fluid flow. Trace metal fractions that irreversibly bind following adsorption provide a contaminant sequestration pathway, limit the availability of micronutrients, and record metal isotope signatures of environmental processes.

Synthesis and properties of asymmetricly substituted Mn(III)-nitro-phenylporphirins

Mn(III)-5-(4-nitrophenyl)-10,15,20-triphenylporphyrin and Mn(III)-5,10,15-tri-(4-nitrophenyl)-20-phenylporphyrin were synthesized using the reactions of complex formation of corresponding porphyrins and metal exchange of their Cd complexes with MnCl2 in dimethylformamide. Partial reduction of Mn(III) to Mn(II) is observed upon dissolution of manganese(III) complexes in dimethylformamide. When NaOH solid is added to a solution of dimethylformamide and in ethanolamine unstable Mn(II) porphyrins are formed. The photochemical stability and oxidative degradation of Mn(III)-porphyrins have been studied. The metal exchange reaction of asymmetricaly substituted Cd(II)-porphyrins with manganese chloride in dimethylformamide has been studied. The kinetic parameters of the reaction were calculated. The influence of substituends and the nature of the salt on the kinetic parameters of the metal exchange reaction was revealed. The synthesized compounds were identified by methods UV-Vis, IR, 1H NMR spectroscopy and mass spectrometry.

Retracted: Glutathione, Cysteine, and D-Penicillamine Role in Exchange of Silver Metal from the Albumin Metal Complex.

[This retracts the article DOI: 10.1155/2022/3619308.].

Cooperative Copper Single-Atom Catalyst in 2D Carbon Nitride for Enhanced CO2 Electrolysis to Methane.

Renewable-electricity-powered carbon dioxide (CO2) reduction (eCO2R) to high-value fuels like methane (CH4) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. In this work, 2D carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), are exploited to host Cu-N2 type single-atom sites with high density (≈1.5 at%), via a facile metal-ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2R-to-CH4 performance with Faradaic efficiency (FECH4) of ≈68% and a high partial current density of 348mA cm-2 at -0.84V vs reversible hydrogen electrode (RHE), surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the matrices and how the Cu local environment dictates the adsorbate BEs, density of states, and CO2-to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2R-to-CH4 pathway.

Metals in nanomotion: probing the role of extracellular vesicles in intercellular metal transfer.

Metals in living organisms and environments are essential for key biological functions such as enzymatic activity, and DNA and RNA synthesis. This means that disruption of metal ion homeostasis and exchange between cells can lead to diseases. EVs are believed to play an essential role in transporting metals between cells, but the mechanism of metal packaging and exchange remains to be elucidated. Here, we established the elemental composition of EVs at the nanoscale and single-vesicle level and showed that the metal content depends on the cell type and culture microenvironment. We also demonstrated that EVs participate in the exchange of metal elements between cells. Specifically, we used two classes of EVs derived from papaya fermented fluid (PaEVs), and decidual mesenchymal stem/stromal cells (DEVs). To show that EVs transfer metal elements to cells, we treated human osteoblast-like cells (MG63) and bone marrow mesenchymal stem cells (BMMSCs) with both classes of EVs. We found that both classes of EVs contained various metal elements, such as Ca, P, Mg, Fe, Na, Zn, and K, originating from their parent cells, but their relative concentrations did not mirror the ones found in the parent cells. Single-particle analysis of P, Ca, and Fe in DEVs and PaEVs revealed varying element masses. Assuming spherical geometry, the mean mass of P was converted to a mean size of 62 nm in DEVs and 24 nm in PaEVs, while the mean sizes of Ca and Fe in DEVs were smaller, converting to 20 nm and 30 nm respectively. When EVs interacted with BMMSCs and MG63, DEVs increased Ca, P, and Fe concentrations in BMMSCs and increased Fe concentration in MG63, while PaEVs increased Ca concentrations in BMMSCs and had no effect on MG63. The EV cargo, including proteins, nucleic acids, and lipids, differs from their origin in composition, and this variation extends to the element composition of EVs in our study. This fundamental understanding of EV-mediated metal exchange between cells could offer a new way of assessing EV functionality by measuring their elemental composition. Additionally, it will contribute novel insights into the mechanisms underlying EV production and their biological activity.

Кадмий и свинец в кормах для аквакультуры (аналитический обзор)

Heavy metals are priority pollutants in feed for aquaculture safety. The study of the intake dynamics and distribution of heavy metals in the abiotic and biotic components of ecosystems proves their significant intake with the diet and higher accumulation during the period of active feeding. The purpose of this work was analysis of regulatory and legal documents in the field of feed control, information on contamination of water bodies and feed raw materials by cadmium and lead, their toxicity and accumulation in the organisms, as well as 2020-2023 monitoring results of feed raw materials of plant and animal origin and plant feeds analysis to justify the need for rationing their permissible levels not only in raw materials, but also in ready-made feed for aquaculture and to assess further prospects for increasing productivity and stable reproduction in the fisheries. The search for scientific information was carried out using the databases Scopus, WoS, Science- Direct, PubChem, PubMed and Elibrary in Russian and English. The information search criteria were limited by the analysis data of from the state veterinary information system «Vesta» of the lead and cadmium contamination detection in plant feeds, feed raw materials of plant and animal origin in the period from 2020 to the first quarter (inclusive) of 2023. For ready-made feeds used in aquaculture the permissible levels of cadmium and lead are not strictly regulated by documents today. The liver, kidneys, gill petals, gonads and muscles take the most active part in the exchange and deposition of heavy metals in fish. Accumulation of heavy metals mains to pathological changes: high levels of heavy metals in the water and feed of cage farms lead to changes in the basic physiological parameters of fish. However, there is not enough information about the contamination of artificial feeds used for fish grown in cages and pools. The development of preparations for leveling effects of cadmium and lead on fish, experimental works maximum close to the real conditions of cultivation and reproduction, and a more in-depth study of the participation of heavy metals in antibiotic resistance dissemination with the participation of aquatic animals are needed.

Unraveling the role of internal-external metal substitution in Zn3[Co(CN6)]2 for the styrene oxide-CO2 cycloaddition reaction.

We investigated the influence of the structural and textural properties along with the chemical environment of pure Zn3[Co(CN)6]2 in comparison with the modified phases on the catalytic performance in the cycloaddition reaction between styrene oxide and CO2. We relate these to the proposed reaction pathways and mechanisms. The natural cubic phase (ZnCoCn) was dehydrated to obtain the rhombohedral phase (ZnCoRn), while the stabilized cubic phase (ZnCoCs) was synthesized by substituting external zinc atoms with cadmium atoms. The rhombohedral stabilized phase (ZnCoRs) was achieved by the internal cobalt change with iron. All the materials were extensively characterized using X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray photoelectron spectroscopy (XPS), and N2 adsorption. The catalytic behavior of the four phases was tested. The crystalline structure of each phase was obtained, and by XPS, it was demonstrated that the chemical environments of all elements conforming to the rhombohedral stabilized phase are different from those of all other materials owing to the exchange of internal metals. The bulk textural properties were similar; only the ZnCoRs presented more micropore area but did not exceed the total surface area of the other materials. The product distribution and yield at reaction times of 2 h and 6 h were closer to those of the cubic phases. The natural rhombohedral phase exhibits the best performance. The tetrabutylammonium bromide (TBAB) and rhombohedral stabilized phase work together to yield a bigger copolymer quantity at the expense of the styrene carbonate (StCO3) production. From the proposed mechanism, the TBAB cation (TBA+) has a "protection" function that drives the closing of the StCO3 ring; however, the charge distribution anisotropy in the four nitrogen atoms generated by Co replacement in ZnCoRs could hold TBA+ as the reaction time progressed, causing an unavailability that triggered the copolymerization propagation step.

Impact of metal exchange on the electronic structure and optical properties of isostructural octa-coordinated MoIV/CdII and WIV/CdII polynuclear cyanide polymers.

The electronic structure and related electronic properties of two novel isostructural octacyanometallates Cd2(H2O)4[MoIV(CN)8]·2H2O and Cd2(H2O)4[WIV(CN)8]·2H2O are described from a combined experimental and computational approach. The impact that the octacoordinated heavy metals W and Mo have on the electronic structure and optical response of isostructural materials whose electronic properties strongly depend on the crystal structure is discussed. It is found that the effect of the polarization power of the metal centers, combined with the ligand field of cyanos, produces considerable changes in the electronic structure and, consequently, in the band gap energy. The ab initio calculations, which were performed with generalized gradient PBE and hybrid HSE06 density functionals, accurately reproduce the electronic structure of [Mo(CN)8]4- and [W(CN)8]4- building units, revealing that the electronic transitions associated with the band gap energy have an origin in the charge transfer phenomena of metal to ligand nature. Moreover, the optical band gap transitions have an allowed indirect behavior in the Γ → M → D direction which is associated with the (x2 - y2) → π* transition. The allowed direct and indirect (experimental and theoretical) band gap energies together with the exciton effective masses are reported.

Imine bond-directed assembly of polyoxometalate-based metal-organic frameworks.

Polyoxometalate-based metal-organic frameworks (POMOFs) are highly effective heterogeneous catalysts that combine the catalytic activity of polyoxometalates (POMs) with the high surface area, tunable porosity, and structural diversity of MOFs. Nevertheless, there is still a lack of a general method to integrate POMs with various transition metal-based building units into POMOFs under mild conditions. In this work, we employed imine bonds to link amino-functionalized Anderson-type POMs with aldehyde-terminated divalent metal clusters, resulting in a series of isostructural POMOFs, M(II)-POMOFs (M = Zn, Co, Mg, or Mn). Furthermore, we used post-synthetic metal exchange and oxidation to transform Zn-POMOF into Fe(III)-POMOF with strong Lewis acidic Fe3+ sites. Notably, both the synthesis and post-synthetic modifications were performed under mild conditions (room temperature, acid-free), preventing the decomposition of the POMs. Compared to M(II)-POMOFs or MOFs without POMs, the combination of Lewis acidic Fe3+ and POMs enhanced its catalytic activity for CO2 cycloaddition with epoxides, enabling efficient synthesis of cyclic carbonates. This versatile synthetic method could broaden the scope of POMOFs, extending their applications in catalysis and beyond.

New evidence of metal exchange in Southeast Asia during the Iron Age: scientific analysis of excavated bronze in Vilabouly, Laos

New evidence of metal exchange in Southeast Asia during the Iron Age: scientific analysis of excavated bronze in Vilabouly, Laos

Improved Lewis Acidity Using Ionic Liquid-Grafted Bimetallic Zr/Ti Uio-66 Fillers for Composite Solid Electrolytes

In recent years, solid-state lithium batteries have gained significant attention due to their high energy density and stability. However, challenges such as low ionic conductivity, non-homogeneous Li ion flux, and low interfacial compatibility of solid electrolytes still remain. Composite solid electrolytes (CSEs) have emerged as a potential solution to these issues, by combining an inorganic filler with a polymer matrix. To develop high-performance CSEs, extensive research has been conducted on inorganic active fillers with an abundance of Lewis acidic sites. The acidic sites of the filler can induce Lewis acid-base interactions, which can decrease the crystallinity of fillers by weakening the attraction between polymer segments and increasing chain mobility. Additionally, they increase the degree of dissociation of lithium salt, resulting in an increase in ionic conductivity. In terms of the concentration gradient of Li-ions, the free anion of lithium salt can be trapped by an acidic filler, thereby reducing the mobility and concentration of the anion. Finally, the acidic filler prevents the oxidation of ether oxygen groups in PEO, thus, improves its electrochemical stability. Furthermore, for increasing the ionic conductivity, inorganic filler should be an active filler capable of serving as Li-ion sources to the interfacial region between polymeric matrix and inorganic fillers, thereby facilitating Li-ion transport. Consequently, Li-ions can hop along the surface of active fillers. Therefore, in order to achieve high-performance CSEs with a polymer matrix, inorganic active fillers with an abundance of acidic sites have emerged as one of the most effective strategies for designing high performance fillers with good compatibility with the matrix. To address this technological need, in this work, we present a novel CSE based on a polyethylene oxide (PEO) matrix with a bimetallic (Zr/Ti) UiO-66-ionic liquid grafted filler (BUIL) that simultaneously modified the metal and ligand sites of UiO-66 MOF particles. The bimetallic structure of BUIL was prepared by replacing the metal sites of UiO-66 with Ti metal ions using the metal exchange method, resulting in the formation of more structural defects and an increase in the number of Lewis acid sites of filler. In addition, the pre-synthesized ionic liquids containing a -OH functional group (IL-OH), N-hydroxyhexyl-N’-methyl imidazolium bis(trifluoromethylsulfonyl)imide, were grafted when synthesizing UiO-66 with a ligand containing a -Br functional group. The BUIL filler functions as a high Lewis acid filler owing to its bimetallic structure and grafted ionic liquid. Also, to utilize BUIL as an active filler, lithium bis(trifluoromethanesulfonyl)imide/1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide (IL, LiTFSI/EMIM-TFSI) was loaded into BUIL (IL@BUIL). In order to confirm the effect of Lewis acid filler interaction on PEO polymer matrix and lithium salt, various spectroscopic characterization methods were employed. As a result, CSEs containing IL@BUIL filler and PEO matrix exhibited markedly improved ionic conductivity, lithium-ion transference number, electrochemical stability, and long-cycle stability of Li metal electrode. After optimization, the ionic conductivity of CSEs at 30°C was enhanced to 0.458 mS cm-1, the lithium-ion transference number was raised to 0.668, and the electrochemical stability window was widened to 4.5 V. In addition, during a continuous plating/stripping test, the lithium metal symmetric cell of CSEs stably cycled for 500 h at a current density of 0.2 mA cm-2. Finally, LiFePO4/IL@BUIL/Li cell shows a capacity of 148 mA h g-1 at 1C.The present strategy of simultaneously modifying the metal and the ligand sites of MOF to improve the properties of CSEs can be used as a general platform for the design of a MOF filler in CSEs system, as well as a guideline for the next generation CSEs.

Post-Synthetic Modifications of Ti(IV)-Based Metal-Organic Frameworks for Enhanced Photocatalysis and Conductivity

Metal-Organic Frameworks (MOFs) are coordination networks with organic ligands containing potential voids, ideal for guest-host interactions. These unique characteristics make them interesting materials for several different applications, including catalysis. Unfortunately, most MOFs feature metal oxide nodes that are insulting by nature, which limits their potential in electro- and photochemical catalysts. To combat these issues, post-synthetic modifications (PSM) can be used to tune MOF properties. This research reports on different PSMs incorporated into the Ti(IV)-based MOFs MIL-125(Ti) and MIL-125(Ti)-NH2. PSMs that introduce intentional defect states and dopant metal ions, such as Ce(IV), were explored to determine their influence on the photo-degradation of Rhodamine B in aqueous solution. Post-Synthetic Metal Exchange (PSME) was used to incorporate Ce(IV) at the Ti(IV) sites in MIL-125(Ti) and MIL-125(Ti)-NH2, and intentional defect states were introduced using formic acid during MOF synthesis. In addition, conductive organic polymers were utilized to make novel polymer-MOF hybrid composites that showed enhanced charge transport properties compared to pristine MOF. Ultimately, these results show how PSMs can be used to impart conductivity and enhance photocatalysis in the MOFs MIL-125(Ti) and MIL-125(Ti)-NH2.

Editorial: Transdisciplinary approaches to metal procurement and exchange in archaeology

Editorial: Transdisciplinary approaches to metal procurement and exchange in archaeology

Bond Trading: Intramolecular Metal and Ligand Exchange within a NO/Ni/Co Complex.

With the goal of generating hetero-redox levels on metals as well as on nitric oxide (NO), metallodithiolate (N2 S2 )CoIII (NO- ), N2 S2 = N,N- dibenzyl-3,7-diazanonane-1,9-dithiolate, is introduced as ligand to a well-characterized labile [Ni0 (NO)+ ] synthon. The reaction between [Ni0 (NO+ )] and [CoIII (NO- )] has led to a remarkable electronic and ligand redistribution to form a heterobimetallic dinitrosyl cobalt [(N2 S2 )NiII ∙Co(NO)2 ]+ complex with formal two electron oxidation state switches concomitant with the nickel extraction or transfer as NiII into the N2 S2 ligand binding site. To date, this is the first reported heterobimetallic cobalt dinitrosyl complex.

Chemical upcycling of PVC-containing plastic wastes by thermal degradation and catalysis in a chlorine-rich environment

Chlorine (Cl)-containing chemicals, including hydrogen chloride, generated during thermal degradation of polyvinyl chloride (PVC) and corresponding mixture impede the chemical recycling of PVC-containing plastic wastes. While upgrading plastic-derived vapors, the presence of Cl-containing chemicals may deactivate the catalysts. Accordingly, herein, catalytic upgrading of pyrolysis vapor prepared from a mixture of PVC and polyolefins is performed using a fixed-bed reactor comprising zeolites. Among the H-forms of zeolites (namely, ZSM-5, Y, β, and chabazite) used in this study, a higher yield of gas products composed of hydrocarbons with lower carbon numbers is obtained using H-ZSM-5, thus indicating further decomposition of the pyrolysis vapor to C1–C4 hydrocarbons on it. Although the formation of aromatic compounds is better on H-ZSM-5, product distributions can be adjusted by further modifying the acidic properties via the alteration of the Si/Al molar ratio, and maximum yields of C1–C4 compounds (60.8%) and olefins (64.7%) are achieved using a Si/Al molar ratio of 50. Additionally, metal ion exchange on H-ZSM-5 is conducted, and upgrading of PVC-containing waste-derived vapor to aromatic chemicals and small hydrocarbon molecules was successfully performed using Co-substituted H-ZSM-5. It reveals that the highest yield of gas products on 1.74 wt% cobalt (Co)-substituted H-ZSM-5 is acquired via the selection of an appropriate metal and metal ion concentration adjustment. Nevertheless, introduction of excess Co into the H-ZSM-5 surface decreases the cracking activity, thereby implying that highly distributed Co is required to achieve excellent cracking activity. The addition of Co also adjusted the acid types of H-ZSM-5, and more Lewis acid sites compared to Brønsted acid sites selectively produced olefins and naphthenes over paraffins and aromatics. The proposed approach can be a feasible process to produce valuable petroleum-replacing chemicals from Cl-containing mixed plastic wastes, contributing to the closed loops for upcycling plastic wastes.

Testing Housing Price Drivers in Santiago de Chile: A Hedonic Price Approach

Hedonic modelling is an empirical analysis technique that is widely used to review the housing market and unpack the main determinants of price. A correct determination of housing price drivers allows a weighted prediction of the value of each dwelling for sale or rent. This paper reviews the fundamental determinants of housing prices that have been published in the literature to see which ones have a better predictive fit for the case of the housing market in the city of Santiago, Chile. From a record of 456,000 property transactions, a dataset composed of 11 explanatory variables is elaborated. Through a semi-logarithmic regression, 4 variables that contribute to explaining the formation of housing prices in Santiago, Chile, are identified. The results indicate that the socioeconomic characterisation of urban areas where housing is traded, the price of copper on the London Metal Exchange, the mortgage interest rate, the age of residential buildings are the main drivers for the main drivers of prices in Santiago. Given the crisis of access to housing in Chile, the article provides relevant information for decision-makers in housing policy.

The SDS22:PP1:I3 complex: SDS22 binding to PP1 loosens the active site metal to prime metal exchange

SDS22 and Inhibitor-3 (I3) are two ancient regulators of protein phosphatase 1 (PP1) that regulate multiple essential biological processes. Both SDS22 and I3 form stable dimeric complexes with PP1; however, and atypically for PP1 regulators, they also form a triple complex, where both proteins bind to PP1 simultaneously (SPI complex). Here we report the crystal structure of the SPI complex. While both regulators bind PP1 in conformations identical to those observed in their individual PP1 complexes, PP1 adopts the SDS22-bound conformation, which lacks its M1 metal. Unexpectedly, surface plasmon resonance (SPR) revealed that the affinity of I3 for the SDS22:PP1 complex is ∼10-fold lower than PP1 alone. We show that this change in binding affinity is solely due to the interaction of I3 with the PP1 active site, specifically PP1’s M2 metal, demonstrating that SDS22 likely allows for PP1 M2 metal exchange and thus PP1 biogenesis.

Rulings of the London Metal Exchange in Islamic Law: An Analysis of Islamic Banking Instruments and Challenges

Purpose: The Islamic banking system is recognized for its role in promoting the equal distribution of resources and its emphasis on risk management. This research paper explores the rulings of the London Metal Exchange (LME) within the framework of Islamic law. The main objective is to investigate the involvement and impact of Islamic banking in LME contracts.&#x0D; &#x0D; Methods: The study utilizes both primary data, obtained through interviews with Islamic banks and LME management, and secondary data from previous research.&#x0D; &#x0D; Results: The findings highlight the significant role of Islamic banks in facilitating LME contracts, with Murabaha, Tawarruq, Istisna, Salam, and Kafala identified as the most commonly used instruments in the GCC regions. However, Islamic banks also face challenges, including criticism from Muslim scholars regarding certain practices.&#x0D; &#x0D; Conclusion: Despite these challenges, there are several opportunities for Islamic banks to contribute to the further development of the Islamic financial system. By addressing concerns, increasing awareness, and adhering to Islamic principles, Islamic banks can play a pivotal role in shaping the future of the financial industry.