Metal-induced Energy Transfer Research Articles

Metal-Induced Energy Transfer (MIET) Imaging of Cell Surface Engineering with Multivalent DNA Nanobrushes.

The spacing between cells has a significant impact on cell-cell interactions, which are critical to the fate and function of both individual cells and multicellular organisms. However, accurately measuring the distance between cell membranes and the variations between different membranes has proven to be a challenging task. In this study, we employ metal-induced energy transfer (MIET) imaging/spectroscopy to determine and track the intermembrane distance and variations with nanometer precision. We have developed a DNA-based molecular adhesive called the DNA nanobrush, which serves as a cellular adhesive for connecting the plasma membranes of different cells. By manipulating the number of base pairs within the DNA nanobrush, we can modify various aspects of membrane-membrane interactions such as adhesive directionality, distance, and forces. We demonstrate that such nanometer-level changes can be detected with MIET imaging/spectroscopy. Moreover, we successfully employed MIET to measure distance variations between a cellular plasma membrane and a model membrane. This experiment not only showcases the effectiveness of MIET as a powerful tool for accurately quantifying membrane-membrane interactions but also validates the potential of DNA nanobrushes as cellular adhesives. This innovative method holds significant implications for advancing the study of multicellular interactions.

Remodeling of the focal adhesion complex by hydrogen-peroxide-induced senescence

Cellular senescence is a phenotype characterized by cessation of cell division, which can be caused by exhaustive replication or environmental stress. It is involved in age-related pathophysiological conditions and affects both the cellular cytoskeleton and the prime cellular mechanosensors, focal adhesion complexes. While the size of focal adhesions increases during senescence, it is unknown if and how this is accompanied by a remodeling of the internal focal adhesion structure. Our study uses metal-induced energy transfer to study the axial dimension of focal adhesion proteins from oxidative-stress-induced senescent cells with nanometer precision, and compares these to unstressed cells. We influenced cytoskeletal tension and the functioning of mechanosensitive ion channels using drugs and studied the combined effect of senescence and drug intervention on the focal adhesion structure. We found that H2O2-induced restructuring of the focal adhesion complex indicates a loss of tension and altered talin complexation. Mass spectroscopy-based proteomics confirmed the differential regulation of several cytoskeletal proteins induced by H2O2 treatment.

3D fluorescence microscopy on a sub-nanometer scale

We spoke to Dr. Jörg Enderlein, about his project Single-Molecule Metal-Induced Energy Transfer, a new method of three-dimensional fluorescence microscopy with a resolution on a molecular scale.

Metal-Induced Energy Transfer (MIET) for Live-Cell Imaging with Fluorescent Proteins

Metal-induced energy transfer (MIET) imaging is an easy-to-implement super-resolution modality that achieves nanometer resolution along the optical axis of a microscope. Although its capability in numerous biological and biophysical studies has been demonstrated, its implementation for live-cell imaging with fluorescent proteins is still lacking. Here, we present its applicability and capabilities for live-cell imaging with fluorescent proteins in diverse cell types (adult human stem cells, human osteo-sarcoma cells, and Dictyostelium discoideum cells), and with various fluorescent proteins (GFP, mScarlet, RFP, YPet). We show that MIET imaging achieves nanometer axial mapping of living cellular and subcellular components across multiple time scales, from a few milliseconds to hours, with negligible phototoxic effects.

Three-dimensional single-molecule localization microscopy with metal-induced energy transfer.

Over the past two decades, super-resolution microscopy has seen a tremendous development in speed and resolution, but for most of its methods, there exists a remarkable gap between lateral and axial resolution, which is by a factor of 2 to 3 worse. One recently developed method to close this gap is metal-induced energy transfer (MIET) imaging, which achieves an axial resolution down to nanometers. It exploits the distance-dependent quenching of fluorescence when a fluorescent molecule is brought close to a metal surface. We combine the extreme axial resolution of MIET imaging with the extraordinary lateral resolution of single-molecule localization microscopy, in particular with direct stochastic optical reconstruction microscopy (dSTORM). This combination allows us to achieve isotropic three-dimensional super-resolution imaging of subcellular structures. Moreover, we used spectral demixing for implementing dual-color MIET-dSTORM that allows us to image and colocalize, in three dimensions, two different cellular structures simultaneously.

Cell shape and tension alter focal adhesion structure

Cells are not only anchored to the extracellular matrix via the focal adhesion complex, the focal adhesion complex also serves as a sensor for force transduction. How tension influences the structure of focal adhesions is not well understood. Here, we analyse the effect of tension on the location of key focal adhesion proteins, namely vinculin, paxillin and actin. We use micropatterning on gold surfaces to manipulate the cell shape, to create focal adhesions at specific cell areas, and to perform metal-induced energy transfer (MIET) measurements on the patterned cells. MIET resolves the different protein locations with respect to the gold surface with nanometer accuracy. Further, we use drugs influencing the cellular motor protein myosin or mechanosensitive ion channels to get deeper insight into focal adhesions at different tension states. We show here that in particular actin is affected by the rationally tuned force balance. Blocking mechanosensitive ion channels has a particularly high influence on the actin and focal adhesion architecture, resulting in larger focal adhesions with elevated paxillin and vinculin and strongly lowered actin stress fibres. Our results can be explained by a balance of adhesion tension with cellular tension together with ion channel-controlled focal adhesion homeostasis, where high cellular tension leads to an elevation of vinculin and actin, while high adhesion tension lowers these proteins.

Single-Molecule Fluorescence Lifetime Imaging Using Wide-Field and Confocal-Laser Scanning Microscopy: A Comparative Analysis.

A recent addition to the toolbox of super-resolution microscopy methods is fluorescence-lifetime single-molecule localization microscopy (FL-SMLM). The synergy of SMLM and fluorescence-lifetime imaging microscopy (FLIM) combines superior image resolution with lifetime information and can be realized using two complementary experimental approaches: confocal-laser scanning microscopy (CLSM) or wide-field microscopy. Here, we systematically and comprehensively compare these two novel FL-SMLM approaches in different spectral regions. For wide-field FL-SMLM, we use a commercial lifetime camera, and for CLSM-based FL-SMLM we employ a home-built system equipped with a rapid scan unit and a single-photon detector. We characterize the performances of the two systems in localizing single emitters in 3D by combining FL-SMLM with metal-induced energy transfer (MIET) for localization along the third dimension and in the lifetime-based multiplexed bioimaging using DNA-PAINT. Finally, we discuss advantages and disadvantages of wide-field and confocal FL-SMLM and provide practical advice on rational FL-SMLM experiment design.

Isotropic three-dimensional dual-color super-resolution microscopy with metal-induced energy transfer.

Over the past two decades, super-resolution microscopy has seen a tremendous development in speed and resolution, but for most of its methods, there exists a remarkable gap between lateral and axial resolution, which is by a factor of 2 to 3 worse. One recently developed method to close this gap is metal-induced energy transfer (MIET) imaging, which achieves an axial resolution down to nanometers. It exploits the distance-dependent quenching of fluorescence when a fluorescent molecule is brought close to a metal surface. In the present manuscript, we combine the extreme axial resolution of MIET imaging with the extraordinary lateral resolution of single-molecule localization microscopy, in particular with direct stochastic optical reconstruction microscopy (dSTORM). This combination allows us to achieve isotropic three-dimensional super-resolution imaging of subcellular structures. Moreover, we used spectral demixing for implementing dual-color MIET-dSTORM that allows us to image and colocalize, in three dimensions, two different cellular structures simultaneously.

Electrically controlling and optically observing the membrane potential of supported lipid bilayers

Supported lipid bilayers are a well-developed model system for the study of membranes and their associated proteins, such as membrane channels, enzymes, and receptors. These versatile model membranes can be made from various components, ranging from simple synthetic phospholipids to complex mixtures of constituents, mimicking the cell membrane with its relevant physiochemical and molecular phenomena. In addition, the high stability of supported lipid bilayers allows for their study via a wide array of experimental probes. In this work, we describe a platform for supported lipid bilayers that is accessible both electrically and optically, and demonstrate direct optical observation of the transmembrane potential of supported lipid bilayers. We show that the polarization of the supported membrane can be electrically controlled and optically probed using voltage-sensitive dyes. Membrane polarization dynamics is understood through electrochemical impedance spectroscopy and the analysis of an equivalent electrical circuit model. In addition, we describe the effect of the conducting electrode layer on the fluorescence of the optical probe through metal-induced energy transfer, and show that while this energy transfer has an adverse effect on the voltage sensitivity of the fluorescent probe, its strong distance dependency allows for axial localization of fluorescent emitters with ultrahigh accuracy. We conclude with a discussion on possible applications of this platform for the study of voltage-dependent membrane proteins and other processes in membrane biology and surface science.

Lifetime based axial contrast enable simple 3D-STED imaging

Stimulated Emission Depletion (STED) microscopy increase spatial image resolution by laterally sharpening the illumination profile of the confocal microscope. However, it remains compromised in axial resolution. To improve axial STED resolution, constructive interference of the STED depletion beam must be formed surrounding the focal plane to turn off the fluorophores beyond the focal plane. For isotropic 3D-STED resolution, this axial STED interference pattern must be overlayed with the doughnut STED beam at nanometer accuracy. Such optical configurations can be challenging in alignment. In this current work, we introduced a straightforward lifetime based axial contrast in STED microscope by imaging the samples on an ITO coated glass coverslip. The STED laser generates surface plasmon resonance on the ITO surface that enhanced the metal induced energy transfer MIET effect on the ITO surface. The enhanced MIET effect established a lifetime gradient with ∼20% dynamic range that extend for mor than 400 nm from the ITO surface. The axial contrast based on the lifetime gradient was directly used for 3D-STED imaging of tubulin fibers inside COS-7 cells, where the vertical displacement of single tubulin fiber was revealed. Lifetime gating could be applied to further improve lateral spatial resolution. Considering that most common implementation of STED microscopes uses pulsed lasers and timing electronics, there is no optical modification of the microscope is required in the current 3D-STED approach.

Influence of ROCK Pathway Manipulation on the Actin Cytoskeleton Height.

The actin cytoskeleton with its dynamic properties serves as the driving force for the movement and division of cells and gives the cell shape and structure. Disorders in the actin cytoskeleton occur in many diseases. Deeper understanding of its regulation is essential in order to better understand these biochemical processes. In our study, we use metal-induced energy transfer (MIET) as a tool to quantitatively examine the rarely considered third dimension of the actin cytoskeleton with nanometer accuracy. In particular, we investigate the influence of different drugs acting on the ROCK pathway on the three-dimensional actin organization. We find that cells treated with inhibitors have a lower actin height to the substrate while treatment with a stimulator for the ROCK pathway increases the actin height to the substrate, while the height of the membrane remains unchanged. This reveals the precise tuning of adhesion and cytoskeleton tension, which leads to a rich three-dimensional structural behaviour of the actin cytoskeleton. This finetuning is differentially affected by either inhibition or stimulation. The high axial resolution shows the importance of the precise finetuning of the actin cytoskeleton and the disturbed regulation of the ROCK pathway has a significant impact on the actin behavior in the z dimension.

Axial Scanning Metal-Induced Energy Transfer Microscopy for Extended Range Nanometer-Sectioning Cell Imaging.

Nanometer-sectioning optical microscopy has become an indispensable tool in membrane-related biomedical studies. Finally, many nanometer-sectioning imaging schemes, such as variable-angle total internal reflection fluorescence microscopy, metal-induced energy transfer (MIET) imaging, and supercritical-angle fluorescence microscopy have been introduced. However, these methods can measure a single layer of molecules, and the measurement ranges are below 100nm, which is not large enough to cover the thickness of lamellipodium. This paper proposes an optical imaging scheme that can identify the axial locations of two layers of molecules with an extended measurement range and a nanometer-scale precision by using MIET, axial focal plane scanning, and biexponential analysis in fluorescence lifetime imaging microscopy. The feasibility of the proposed method is demonstrated by measuring an artificial sample of a known structure and the lamellipodium of a human aortic endothelial cell whose thickness ranges from 100 to 450nm with 18.3nm precision.

Hydrodynamic effects on the energy transfer from dipoles to metal slab.

A systematic study of nonlocal and size effects on the energy transfer of a dipole (e.g., a molecule or a quantum dot) induced by the proximity of a metal slab is presented. Nonlocal effects are accounted for using the hydrodynamic model (HDM). We derive a general relation that connects the energy transfer rate to the linear charge density-density response function of the slab. This function is explicitly evaluated for the HDM and the local Drude model. We show that a thin metal slab can support a series of higher-frequency surface plasma wave (SPW) modes in addition to the normal SPW modes, thanks to the nonlocal effects. These modes markedly alter the response and the energy transfer process, as revealed in the structure of the energy transfer rate in the parameter space. Our findings are important for applications such as the recently developed metal-induced energy transfer imaging, which relies on accurate modeling of the energy transfer rate.

Graphene- and metal-induced energy transfer for single-molecule imaging and live-cell nanoscopy with (sub)-nanometer axial resolution.

Super-resolution fluorescence imaging that surpasses the classical optical resolution limit is widely utilized for resolving the spatial organization of biological structures at molecular length scales. In one example, single-molecule localization microscopy, the lateral positions of single molecules can be determined more precisely than the diffraction limit if the camera collects individual photons separately. Using several schemes that introduce engineered optical aberrations in the imaging optics, super-resolution along the optical axis (perpendicular to the sample plane) has been achieved, and single-molecule localization microscopy has been successfully applied for the study of 3D biological structures. Nonetheless, the achievable axial localization accuracy is typically three to five times worse than the lateral localization accuracy. Only a few exceptional methods based on interferometry exist that reach nanometer 3D super-resolution, but they involve enormous technical complexity and restricted sample preparations that inhibit their widespread application. We developed metal-induced energy transfer imaging for localizing fluorophores along the axial direction with nanometer accuracy, using only a conventional fluorescence lifetime imaging microscope. In metal-induced energy transfer, experimentally measured fluorescence lifetime values increase linearly with axial distance in the range of 0-100 nm, making it possible to calculate their axial position using a theoretical model. If graphene is used instead of the metal (graphene-induced energy transfer), the same range of lifetime values occurs over a shorter axial distance (~25 nm), meaning that it is possible to get very accurate axial information at the scale of a membrane bilayer or a molecular complex in a membrane. Here, we provide a step-by-step protocol for metal- and graphene-induced energy transfer imaging in single molecules, supported lipid bilayer and live-cell membranes. Depending on the sample preparation time, the complete duration of the protocol is 1-3 d.

Large field-of-view nanometer-sectioning microscopy by using metal-induced energy transfer and biexponential lifetime analysis

Total internal reflection fluorescence (TIRF) microscopy, which has about 100-nm axial excitation depth, is the method of choice for nanometer-sectioning imaging for decades. Lately, several new imaging techniques, such as variable angle TIRF microscopy, supercritical-angle fluorescence microscopy, and metal-induced energy transfer imaging, have been proposed to enhance the axial resolution of TIRF. However, all of these methods use high numerical aperture (NA) objectives, and measured images inevitably have small field-of-views (FOVs). Small-FOV can be a serious limitation when multiple cells need to be observed. We propose large-FOV nanometer-sectioning microscopy, which breaks the complementary relations between the depth of focus and axial sectioning by using MIET. Large-FOV imaging is achieved with a low-magnification objective, while nanometer-sectioning is realized utilizing metal-induced energy transfer and biexponential fluorescence lifetime analysis. The feasibility of our proposed method was demonstrated by imaging nanometer-scale distances between the basal membrane of human aortic endothelial cells and a substrate.

Wide-Field Fluorescence Lifetime Imaging of Single Molecules.

Fluorescence lifetime imaging (FLIM) has become an important microscopy technique in bioimaging. The two most important of its applications are lifetime-multiplexing for imaging many different structures in parallel, and lifetime-based measurements of Förster resonance energy transfer. There are two principal FLIM techniques, one based on confocal-laser scanning microscopy (CLSM) and time-correlated single-photon counting (TCSPC) and the other based on wide-field microscopy and phase fluorometry. Although the first approach (CLSM-TCSPC) assures high sensitivity and allows one to detect single molecules, it is slow and has a small photon yield. The second allows, in principal, high frame rates (by 2-3 orders of magnitude faster than CLSM), but it suffers from low sensitivity, which precludes its application for single-molecule imaging. Here, we demonstrate that a novel wide-field TCSPC camera (LINCam25, Photonscore GmbH) can be successfully used for single-molecule FLIM, although its quantum yield of detection in the red spectral region is only ∼5%. This is due to the virtually absent background and readout noise of the camera, assuring high signal-to-noise ratio even at low detection efficiency. We performed single-molecule FLIM of different red fluorophores, and we use the lifetime information for successfully distinguishing between different molecular species. Finally, we demonstrate single-molecule metal-induced energy transfer (MIET) imaging which is a first step for three-dimensional single-molecule localization microscopy (SMLM) with nanometer resolution.

Scanning FCS and Superresolution Microscopy on 2D Lipid Membranes

Fluorescence Correlation Spectroscopy (FCS) is an established tool for understanding the dynamics of complex cellular processes. By applying the approach scanning FCS (sFCS), significant improvements can be obtained when studying slowly diffusing species, as is often the case in cell membranes. In sFCS, the excitation volume is scanned rapidly through the sample allowing for the simultaneous measurement of the diffusion of species at multiple locations within the sample. This significantly increases the statistical accuracy. In addition, shorter residence times of the fluorophores lead to lower photon doses experienced by each detected molecule, reducing the risk of photobleaching. This is especially important for sensitive fluorophores or when performing combined Stimulated Emission Depletion (STED) and FCS measurements. An added advantage of the scanning process is the ability to determine the observation volume without prior calibration. Here, we show results obtained with a confocal time-resolved fluorescence microscope (MicroTime 200 STED equipped with a FLIMbee galvo scanner, PicoQuant). We performed sFCS measurements on supported lipid bilayers (SLBs) which are commonly used as a simple model system for biological membranes. As the thickness of a bilayer is just a few nanometers, the diffusion properties determined with FCS or sFCS usually correspond to an average over both leaflets. We utilize the fluorescence lifetime information in order to achieve an axial nanometric localization based on Metal Induced Energy Transfer (MIET) [Karedla et al. (2014).ChemPhysChem 15(4):705-711]. The measured lifetime values enable us to separate the different molecular diffusion properties within the upper and the lower leaflet of the SLB measured on graphene.

Dual-Color Metal-Induced Energy Transfer (MIET) Imaging for Three-Dimensional Reconstruction of Nuclear Envelope Architecture.

The nuclear envelope, comprising the inner and the outer nuclear membrane, separates the nucleus from the cytoplasm and plays a key role in cellular functions. Nuclear pore complexes (NPCs) are embedded in the nuclear envelope and control transport of macromolecules between the two compartments. Recently, it has been shown that the axial distance between the inner nuclear membrane and the cytoplasmic side of the NPC can be measured using dual-color metal-induced energy transfer (MIET). This chapter focuses on experimental aspects of this method and discusses the details of data analysis.

Graphene-based metal-induced energy transfer for sub-nanometre optical localization

Single-molecule fluorescence imaging has become an indispensable tool for almost all fields of research, from fundamental physics to the life sciences. Among its most important applications is single-molecule localization super-resolution microscopy (SMLM) (for example, photoactivated localization microscopy (PALM)1, stochastic optical reconstruction microscopy (STORM)2, fluorescent PALM (fPALM)3, direct STORM (dSTORM)4 and point accumulation for imaging in nanoscale topography (PAINT)5), which uses the fact that the centre position of a single molecule’s image can be determined with much higher accuracy than the size of that image itself. However, a big challenge of SMLM is to achieve super-resolution along the third dimension as well. Recently, metal-induced energy transfer (MIET) was introduced to axially localize fluorescent emitters6–9. This exploits the energy transfer from an excited fluorophore to plasmons in a thin metal film. Here, we show that by using graphene as the ‘metal’ layer, one can increase the localization accuracy of MIET by nearly tenfold. We demonstrate this by axially localizing single emitters and by measuring the thickness of lipid bilayers with angstrom accuracy. Using graphene as the ‘metal’ layer can increase the localization accuracy of metal-induced energy transfer, enabling axial localization of single emitters and measurement of the thickness of lipid bilayers with angstrom accuracy.

Metal-induced energy transfer

Abstract Since about a decade, metal-induced energy transfer (MIET) has become a tool to measure the distance of fluorophores to a metal-coated surface with nanometer accuracy. The energy transfer from a fluorescent molecule to surface plasmons within a metal film results in the acceleration of its radiative decay rate. This can be observed as a reduction of the molecule’s fluorescence lifetime which can be easily measured with standard microscopy equipment. The achievable distance resolution is in the nanometer range, over a total range of about 200 nm. The method is perfectly compatible with biological and even live cell samples. In this review, we will summarize the theoretical and technical details of the method and present the most important results that have been obtained using MIET. We will also show how the latest technical developments can contribute to improving MIET, and we sketch some interesting directions for its future applications in the life sciences.