Metal Concentrations Research Articles

Pollution Characteristics, Risk Assessment and Source Identification of Heavy Metals in Surface Sediments from the Cage Fish Farm of Poyang Lake, China

ABSTRACT With the development of cage culture, increasing heavy metals concentrations are being taken into sediments. The accumulation of heavy metals in sediments may cause long term environmental issues and pose threat to human health. Fourteen surface sediment samples were collected to assess the contamination status and potential ecological risk of heavy metals, and identify their potential sources from the cage fish farm of Poyang Lake. The concentrations of Cu, Pb, Zn, Cd, Cr, As and Ni in the sediments were measured by ICP-MS. The geo-accumulation index, enrichment factor and potential ecological risk index were implied to evaluate their pollution levels and ecological risk. The principal component analysis was used to identify their potential sources. The results showed that all of the examined heavy metals content exceeded their background values. These heavy metals (except Cd, Cr and As) presented moderately polluted level. Cu showed significant enrichment, Zn, Pb and Ni exhibited moderate enrichment, As and Cd presented minimal enrichment. Cu and Cd posed a moderate ecological risk, and the other heavy metals posed a low ecological risk. The comprehensive potential ecological risk was associated with considerable ecological risk. Cage culture, smelting, mining and agriculture activities were their primary pollution sources.

Investigating the Spatial Patterns of Heavy Metals in Topsoil and Asthma in the Western Salt Lake Valley, Utah

Mining activities, particularly in large excavations like the Bingham Canyon Copper Mine in Utah, have been increasingly linked to respiratory conditions due to heavy-metal-enriched waste and dust. Operating continuously since 1906, the Bingham Canyon Copper Mine contributes 4.4% of the Salt Lake Valley PM2.5 pollution. However, the extent of its contributions to larger-sized particulate matter (PM10) dust, soil and water contamination, and human health impacts is largely unknown. Aerosol optical depth data from Sentinel-2 imagery revealed discernible dust clouds downwind of the mine and smelter on non-prevailing-wind days, suggesting potential heavy metal dispersion from this fugitive dust and subsequent deposition to nearby surface soils. Our analysis of topsoils from across the western Salt Lake Valley found mean arsenic, copper, lead, and zinc concentrations to be well above global background concentrations. Also, the minimum values for arsenic and maximum values for lead were well above the US EPA regional screening levels for residential soils. Thus, arsenic is the metal of greatest concern for impacts on human health. Elevated concentrations of all metals were most notable near the mine, smelter, and tailings pond. Our study linked these elevated heavy metal levels to regional asthma outcomes through cluster analysis and distance-related comparison tests. Significant clusters of high asthma rates were observed in regions with elevated topsoil heavy metal concentrations, impacting both low- and high-income neighborhoods. The findings of this preliminary study suggest that the mine, smelter, and recent construction activities, especially on lands reclaimed from former tailings ponds, could be contributing to atmospheric dust containing high levels of heavy metals and exacerbating asthma outcomes for residents. However, the methods used in the study with aggregated health outcome data cannot determine causal links between the heavy metal contents of soil and health outcomes; they can only point to potential links and a need for further investigation. Such further investigation should involve individual-level data and control for potential confounding factors, such as socioeconomic status, access to healthcare, and lifestyle factors, to isolate the effect of metal exposures on asthma outcomes. This study focused on atmospheric deposition as a source of heavy metal enrichment of topsoil. However, future research is also essential to assess levels of heavy metals in subsoil parent materials and local surface and groundwaters to be able to assess the links between the sources or methods of soil contamination and health outcomes.

Assessing Heavy Metal Contamination in Commonly Used Fertilizers for Polyculture Fish Ponds and Its Implications for Human Health: A Comprehensive Investigation.

Over-fertilizing fish ponds can cause pollution, introducing heavy metals into the food chain and posing health risks. The present study investigated the incidence of heavy metals (Pb, Cu, Cd, and Cr) in commonly applied fertilizers, including nitrogen, phosphorus and potassium (NPK), triple superphosphate (TSP), and di-ammonium phosphate (DAP), and their association with heavy metals in water, sediment, and cultured fish species (Catla catla, Labeo rohita, and Cyprinus carpio) in polyculture fish ponds. The study was conducted over 4months, with four groups in triplicates: control (no fertilizer), group 1 (NPK), group 2 (TSP), and group 3 (DAP). Heavy metal analysis was carried out using atomic absorption spectrophotometry before and after fertilizer application. Significantly (p < 0.05) higher levels of heavy metals were observed in water and sediment after applying fertilizers, with the most pronounced results in group 3 (DAP) followed by group 2 (TSP). The concentration of heavy metals was significantly (p < 0.05) higher in group 3 (DAP) fertilizers compared to other groups. Compared to the control, the concentration and bioaccumulation of heavy metals were significantly (p < 0.05) higher in the fertilizer-applied groups, with notably higher levels in group 3 (DAP). Cluster analysis and the correlation matrix did not show any significant association between the heavy metals and the fertilizers, indicating a complex interplay between the biotic and abiotic factors of the system. The health index (HI) value was < 1 in fish muscles of all studied groups, indicating the fish are safe for consumption. The study recommends monitoring and regulating fertilizer use, especially DAP, to prevent heavy metal contamination, and exploring sustainable alternatives to minimize environmental and health risks.

Causes of the unremitting high ambient levels of PM10 in a suburban background site in NE Spain

Atmospheric PM10 and benzo(a)pyrene (BaP) concentrations in Manlleu (NE Spain) have remained high from 2008 to 2023, frequently exceeding EU limit/target values, and reaching BaP levels up to six times higher than urban averages in Spain. Furthermore, PM speciation campaigns were carried out in 2013, 2014–2015, 2016–2017 and 2021–2022. Chemical mass closure for autumn-winter showed a consistent PM10 composition for the different PM speciation campaigns, comprising 46–53% organic matter (OM), 18–26% secondary inorganic aerosol (SIA), 13–23% mineral matter (MM), and 5–9% elemental carbon (EC). Trend analysis revealed very light decrease and constant concentrations for PM10 and BaP, respectively over the study period, emphasizing the need for compliance with current and forthcoming EU air quality directives, the last aiming to halve PM10 limit values. Source apportionment of samples of the sporadic campaigns identified biomass burning (BB, 17.5 μg m−3, 48%) and MM and industry (16.3 μg m−3, 44%) as the main autumn-winter PM10 contributors, with high SIA concentrations attributed to several factors, including high ammonia (NH3) emissions. Local topography and meteorological conditions contribute to aggravate PM10 pollution. While metal concentrations have decreased since 2013, suggesting reduced industrial emissions, persistently high OM and EC concentrations indicate ongoing issues with BB emissions from domestic, commercial, and agricultural sources. Online analysis of black carbon (BC) and non-refractory PM1 components during winter 2016–2017 confirmed domestic and commercial BB as the primary sources of the BB contributions. These findings highlight the need of the implementation of more effective measures in reducing BB and agricultural/farming NH3 emissions. This study highlights the relevance of these issues for similar towns, the probable unremitting problem over the last decade, and the necessity of enhanced monitoring in small cities and policy actions to meet air quality standards under the new EU directive.

Evaluation of human and ecological health risks associated with the potentially toxic heavy metals in groundwater of Vellore city, Tamil Nadu, India

Groundwater pollution by heavy metals is a significant and alarming threat globally, through its chronic effect on human health and ecosystem. The current study evaluated the identification and risk assessment of heavy metals in groundwater of the Vellore city, Tamilnadu, India. Groundwater samples were collected from 32 locations over a continuous period of 2022–2023 for every three months on seasonal basis. The samples were analysed for pH, Total Dissolved Solids (TDS), Hardness and heavy metals (Al, As, Ba, Cd, Cu, Pb, Al and Zn). The analysed mean concentrations of these heavy metals were found in the order: As > Cd > Pb > Ba >Zn >Al> Cu. Elevated concentrations of heavy metals were observed in 2022, likely influenced by rainfall and land use patterns. Heavy metals such as Al, As, Pb, and Cd exceeded the BIS limits and whereas Ba, Cu, and Zn concentrations remain within desirable limits. Groundwater Quality Index (GWQI) classified 41% as 'unfit for drinking'. Ecological risk indices (ERI) indicate significant contamination in 34% of samples, with Al and Pb being primary contributors. Non-carcinogenic health risk assessments reveal, chronic hazards, where children facing higher risks followed by men and women groups. Carcinogenic risk assessments indices such as Heavy metal pollution Index (HPI) shown 25% of samples in critical quality, Heavy metal Evaluation Index (HEI) evaluated all samples were in low contamination and Contamination Index (CI) shown 72% samples under high contamination posing high risk to humans. Probable Cancer Risk (PCR) values for As, Pb, and Cd exceed acceptable ranges across all demographic groups posing cancer risk to humans particularly children. The present study highlights the need for groundwater treatment and regulatory interventions to mitigate health and ecological risks due to the contamination of heavy metals in Vellore city.

Investigating the Interactive Effect of Arbuscular Mycorrhizal Fungi and Different Chelating Agents (EDTA and DTPA) with Different Plant Species on Phytoremediation of Contaminated Soil

Heavy metal (HM) contamination in soil poses a severe environmental threat, jeopardizing ecosystem health and potentially entering the food chain through plant uptake. Phytoremediation, a bioremediation technique utilizing plants to remove or immobilize contaminants, offers a sustainable and eco-friendly solution for HM remediation. This study investigated the interactive effects of arbuscular mycorrhizal fungi (AMF) and chelating agents (EDTA and DTPA) on the growth of maize (Zea mays L.) and alfalfa (Medicago sativa L.) cultivated in metal-contaminated soil and their impact on HM uptake by these plants. The findings revealed that AMF and chelating agents have complex interactive effects on plant growth and metal accumulation. Maize (Zea mays L.) shoot dry matter increased with AMF and chelating agents at lower concentrations. Both plants generally showed a significant (p ≤ 0.05) increase in shoot dry matter with amendments, with AMF × EDTA (10 mmol/kg) being the most effective for alfalfa. DTPA and EDTA generally reduced the DTPA-extractable metals in soil, suggesting potential for metal removal. However, the effects of AMF on metal availability were variable. Metal concentrations in maize (Zea mays L.) shoots increased with increasing DTPA and EDTA concentrations, while the effects of AMF were more complex. The alfalfa shoot metal content showed varied responses, with EDTA (5 mmol/kg) effectively reducing the metal uptake. In general, treatments involving chelating agents (DTPA and EDTA) tend to result in higher bioaccumulation factor (BF) values compared to the non-treated controls for most HMs in both plant species. Mycorrhizal fungi (AMF) treatment alone or in combination with chelating agents also showed that varied effects on HM uptake in both the alfalfa and maize treatments with chelating agents, especially at higher concentrations, generally promoted the greater translocation of HMs in both plant species. Both alfalfa and maize responded differently to treatments, with some treatments showing higher translocation factor (TF) values for certain HMs in one species compared to the other. Mycorrhizal fungi (AMF) treatment alone or in combination with chelating agents also showed varied effects on HM uptake and translocation in both alfalfa and maize. Further research is required to optimize remediation strategies that balance plant health and metal mobilization.

The molecular insights of cyanobacterial bioremediations of heavy metals: the current and the future challenges.

In recent years, overexplorations of ore and the growth of industries are the prime factors in the release of heavy metals in environments. As a result, the food crops and water bodies are contaminated with metals which may have several adverse effects on the health of humans and other living species. These metals and metalloids, such as Zn, Cu, Mn, Ni, Cr, Pb, Cd, and As, upset the biochemical pathways of metabolite synthesis in living organisms and contribute to the etiology of different diseases. Microorganisms include bacteria, archaea, viruses, and many unicellular eukaryotes, which can span three domains of life-Archaea, Bacteria, and Eukarya-and some microorganisms, such as cyanobacteria, have shown high efficiency in the biosorption rate of heavy metals. Cyanobacteria are suitable for bioremediation as they can grow in adverse environments, have a less negative impact on the surrounding environment, and are relatively cheaper to manage. The structure of cyanobacteria has shown no extensive internal-bound membranes, so it can directly employ the physiological mechanisms to uptake heavy metals from contamination sites. Such biochemical makeups are suitable for managing and bioremediating heavy metal concentrations in polluted environments. This review aims to explore the potential of cyanobacteria in the bioremediation of heavy metals and metalloids in water bodies. Additionally, we have identified the prospects for enhancing bioremediation effectiveness.

GENOMIC INSTABILITY IN ONION (ALLIUM CEPA L.) IRRIGATED WITH INDUSTRIAL WASTEWATER: A CYTOGENETIC STUDY

Wastewater negatively affects the production of plants. The impact can vary depending on the wastewater content and the sensitivity of the plant type. The purpose of the current study was to look at the hazardous effects of wastewater from the steel and rubber industries on onions (Allium cepa). Twenty-four pots were filled with soil. Three replicates are used in this study to investigate the impact on Allium cepa. To evaluate the level of toxicity of the rubber and steel industries' waste waters, three concentrations of each wastewater and a control were selected. The concentrations for rubber industry effluent were chosen: 80% (S1), 90% (S2), and 100% (S3) and for steel industry 80% (R1), 90% (R2), and 100% (R3). Wastewater treatment inhibited root development when compared to control. Genotoxic research at different intensities showed chromosomal abnormalities. As the concentrations increased, the mitotic index fell and chromosomal abnormalities grew. Chromosome bridges, nuclear budding, sticky and coagulated anaphase and metaphase, and other chromosome abnormalities were seen. Overall, it was shown that the application of wastewater from the steel sector and wastewater from the rubber business had a detrimental effect on plant growth. However, when compared to rubber industry wastewater, steel sector wastewater has a higher level of toxicity. Compared to rubber sector waste water, steel industry wastewater has a higher concentration of heavy metals.

Assessment of bi-metal paleo-redox proxies in the Bakken Formation black shales, Williston Basin, North Dakota, USA

The influence of paleoredox conditions and water-mass restriction on trace metal (TM) accumulation in the lower (LBS) and upper black shales (UBS) of the Devonian–Mississippian (D–M) Bakken Formation was assessed utilizing V/Cr, V/(V + Ni), Ni/Co, U/Th, and enrichment factors (EF) for Mo vs. U. These assessments were compared to previously published estimates based on degree of pyritization (DOPT), sulfur‑iron and C–S–Fe relationships, and sedimentological data. Bi–metal ratios suggest >80 % of samples were deposited under suboxic to anoxic/euxinic conditions, whereas DOPT results suggest >60 % of samples were deposited under dysoxic (0.42–0.75 DOPT) bottom–water conditions. DOPT results are in good agreement with C–S–Fe and total S vs. Fe assessments of paleoredox conditions and sedimentological evidence. Good agreement is also seen between Mo/TOC and Mo EF/U EF that both suggest the Bakken shales were deposited under a relatively unrestricted water mass conditions resulting in consistent renewal of TMs into the basin. With TM resupply outpacing drawdown, the basin could support enhanced primary productivity as well as high concentrations of TMs. Trace metal concentrations for the Bakken Fm. show considerable range for Co (0–10,324 ppm), Mo (0–2018 ppm), Ni (0–1574 ppm), U (0–1604 ppm), and V (0–3194 ppm), and bi–metal ratios for the Bakken Fm. are up to 5× greater than those reported for other D–M black shale formations. Bivariate and principal component analysis indicate Mo, Ni, U, and V accumulation was more closely associated with the organic fraction than with reducing conditions, thus accumulation of organic matter during deposition and generation, migration, and biodegradation of hydrocarbons during diagenesis may have influenced the accumulation and distribution of these TMs. Furthermore, changes in biogeochemical processes during the D–M transition may have fundamentally altered marine chemistry, with the evolution of vascular land plants and enhanced terrestrial weathering leading to an increased influx of nutrients into marine waters resulting in the Annulata, Dasberg, and Hangenberg black shale events. Factors controlling TM accumulation during time of deposition (e.g., TM availability, bottom-water redox conditions, adsorption onto organic matter) and during diagenesis and catagenesis (e.g., alteration and break down of organic matter, movement of fluid hydrocarbons or other basinal fluids) likely contribute to the lack of agreement between redox proxies, and subsequently, the lack of applicability of bi–metal ratios in assessing bottom–water conditions for the Bakken shales. Therefore, it is suggested that these bi-metal redox proxies are not an effective means to describe bottom-water conditions during the deposition of the Bakken shales.

Hydrographic restriction conditions in the Middle and Upper Yangtze region during the Early Silurian post-glacial transgression: Constraints from major, trace elemental geochemistry and Mo-TOC relationship

Redox-sensitive trace metals have not only been widely used as the proxy for palaeoredox potential due to the strong enrichments under reducing conditions but also provide critical information into water-mass properties, such as the degree of basin restriction. In order to reveal the Early Silurian post-glacial transgression hydrographic restriction conditions throughout the Middle and Upper Yangtze region, trace metal concentrations and organic geochemical data of the lower Longmaxi Formation were analyzed by the Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Leco combustion techniques. We analyzed the hydrographic restriction conditions and redox conditions of different depocenters, including the Southern, Eastern, and Northern Sichuan Basin depocenters and the Western Hubei Region depocenter. The sedimentary Mo-TOC relationship, MoEF-UEF covariation, and upwelling intensity suggest that the Southern, Eastern Sichuan Basin depocenters and the Western Hubei Region depocenter were deep water areas with moderate hydrographic restriction, whereas the restriction conditions of Northern Sichuan Basin depocenter was relatively weak. In addition, due to the combined effect of geographical location, connectivity with the open Qinling Ocean, and estuarine circulation, restriction degrees varied in the same depocenter. The redox proxy (Corg/P) indicated that the lower Longmaxi Formation was deposited in an anoxic water column. There are significant spatial differences in redox conditions in different depocenters and different locations within the same depocenter, which may be controlled by relative sea level rise, hydrographic restriction, and upwelling intensity. Anoxic conditions were more likely to occur in areas where water column was relatively deep and restricted. In addition, the anoxic conditions in the Northern Sichuan Basin depocenter may also associated with the strong upwelling intensity and the behavior of P cycling back to water column, which can promote the primary productivity and further maintain persistent anoxic conditions. The correlation between Corg/P and Mo/TOC indicates that, in relatively weak restriction basin, the trace elements enrichment in sediments was controlled by trace elemental concentrations in seawater. In moderate restriction basin, the trace elements enrichment was mainly controlled by redox conditions. Whereas under more reducing conditions, hydrographic restriction may tend to become the dominant factor. The application of sediment Mo-TOC relationship, MoEF-UEF covariation, and upwelling can provide insights into hydrographic restriction conditions, but the Mo/TOC relationship is limited to anoxic facies, as little trace metal accumulation could also be the consequence of oxic conditions.

Occupational exposure assessment of heavy metals among construction workers in Rawalpindi Pakistan

Construction is one of the primary drivers of development and economic activity in Pakistan. Many activities are performed at the construction site including cement mixing, carpentry, and painting. Workers working in these activities are exposed to toxic heavy metals. Due to exposure to these heavy metals, subjects are at high risk of developing diseases mainly respiratory diseases. Human hair and nail samples of construction workers in Rawalpindi, Pakistan were collected to assess the heavy metals. Heavy metals such as Al, As, Cd, Cr, Ni, K, Pb, and Zn were analyzed in the hair and fingernails of the construction workers. To determine the level of selected heavy metals, Inductively Coupled Plasma optical emission spectrometry was used. Results revealed that Al was the highest with a mean concentration of 7.54 μg/g in all three groups. Whereas Cd was below the detection limit. Heavy metal concentration was high in hair (1.77 μg/g) in two groups including cement mixing and carpentry. However, in the carpentry group heavy metal concentration was high in nails (1.19 μg/g). Additionally, the workers of the carpentry group have higher metal concentrations when compared to the other two groups and this group was at high risk of toxic metal exposure. After the correlation analysis, the results revealed that age was significantly correlated to body burden of metals (r = 0.496, p ≤ 0.05). Moreover, some of the heavy metals in hair and nails were significantly correlated with each other. Since all groups, especially carpenters, show high levels of heavy metals, there is a need for regular monitoring of heavy metals at construction sites. Most importantly, the implementation of training programs is needed to raise awareness among construction workers.

Remediation quantum of organic amendments to immobilize potentially toxic heavy metals in wastewater-contaminated soils through maize cultivation

Wastewater is considered a good reservoir of mineral elements that can be used for agriculture, aquaculture, and some other activities after adopting suitable measures. The gap between supply and demand for water is increasing exponentially because of the abrupt boost to the world’s population. This poses a threat to human life as it has reached alarming levels in some parts of the globe. Normally, wastewater consists of liquid waste produced by commercial or industrial sources for daily use, consumption, and production. It is time to refocus our attention on a kind of circulating water system by reusing municipal wastewater for agricultural purposes, particularly irrigation. The recycled or treated water would be used as an alternative to fresh water. In the current study, the impact of various organic amendments was studied to mitigate the toxic effects of pollutants present in wastewater by cultivating maize as a test crop. The present study comprised five treatments replicated four times with a randomized complete block design under field conditions. In this experiment, the treatments included T1 (treatment 1) = control (wastewater-polluted soil without the application of any amendment), T2 = farmyard manure (FYM) at 2.5 tons ha-1 (hectare-1), T3 = FYM at 5.0 tons ha-1, T4 = compost at 2.5 tons ha-1, and T5 = compost at 5.0 tons ha-1. The application of FYM at 5.0 tons ha-1 (T3) was recorded as being the most effective as the maximum improvement was observed in soil characteristics such as pH, electrical conductivity (EC), sodium adsorption ratio (SAR), and organic matter, and for T3, these were 7.33, 2.22 dS m-1, 8.16, and 0.94%, respectively. T3 remained most superior in reducing the concentration of heavy metals in the soil; for example, lead, cadmium, nickel, and arsenic for T3 were 8.64, 1.34, 10.44, and 2.25 mg kg-1 (milligrams per kg), respectively. Maximum fresh biomass (fodder yield) of 9.98 tons ha-1 was harvested when FYM was applied at 5.0 tons ha-1 to the soil compared to 6.2 tons ha-1 in the control plot. The highest contents of nitrogen (1.20%), phosphorus (0.41%), and potassium (3.97%) were observed in maize plants for T3. In maize plants (T3), the concentration of lead, cadmium, nickel, and arsenic was reduced to levels of 1.92, 0.23, 2.28, and 1.25 mg kg-1, respectively. Therefore, it can be concluded from the findings of the experiment that the application of FYM significantly reduced heavy metal concentrations and improved soil health, along with maize crop growth and productivity.

Human health risk assessment of potentially toxic metals in fish (Cynoglossus sp.) commonly consumed in Nigeria

In order to determine the concentrations of certain metals that may be hazardous in widely consumed fish species (Cynoglossus sp.) in Nigeria, atomic absorption spectrophotometry was used. The main objectives were to determine the most likely sources of these metals and assess the potential health concerns connected with consuming fish. Fish samples were collected from Sabo market, Ile-Ife, Osun state. They were digested using HNO3 and H2O2 and subjected to elemental analysis (Fe, Zn, Mn, Pb, Cu, Cd, Co, and Cr) using atomic absorption spectrophotometer. The results showed that Lead (Pb) had the lowest mean concentration of 0.56 ± 0.01 mg/kg, while Zinc (Zn) had the highest average concentration of 12.88 ± 0.18 mg/kg. Strong and substantial correlations between the studied metals were shown by the analysis of the correlation matrix and cluster patterns. The study also evaluated a number of health risk parameters, including target hazard quotient, estimated daily intake, and cancer risk, which together suggested that consuming these fish samples posed health concerns for both adults and children. According to relative risk, seafood consumption raises the most alarm about Cd levels. The study came to the conclusion that due to the propensity for these potentially hazardous metals to bioaccumulate, only a moderate amount of these fish samples should be consumed. Additionally, it is strongly advised to discourage the disposal of domestic and industrial wastes into water bodies.

Effectiveness of constructed wetland technology-treated industrial wastewater on the spinach (Spinacia oleracea) health risks and biochar efficiency.

In peri-urban areas, use of industrial wastewater for irrigation is a common practice. Industrial wastewater contains cadmium, chromium, lead, nickel, and other elements that deteriorate food quality and affect human health. Biochar has been proven to remediate heavy metal contaminated soil by reducing their mobility and bioavailability. A pot experiment was conducted to evaluate the efficiency of different levels of biochar on spinach growth with low heavy metal concentration and to minimize associated health issues. The experiment lasted two months and the treatments: Control (tap water), untreated and treated industrial wastewater and both in combination with biochar (0.5% and 1%) were applied in completely randomized design. Findings suggested that treated industrial wastewater with 1% biochar resulted in maximum plant height, shoot weight, chlorophyll contents (SPAD value), photosynthetic and transpiration rate. Biochar significantly reduced heavy metal mobility in soil due to its porous structure, high pH, higher CEC, and variety of surface functional groups. The cumulative hazard index (HI), hazard quotient, cancer risk, and total cancer risk (TCR) were calculated using method provided by US-EPA for each metal. All treatments had HI values of < 1, however applying 1% biochar significantly reduced the HI values to 2.00E-01 and 2.88E-01 in adults and children, respectively. TCR for all treatments was < 1, while treated industrial wastewater and biochar (1%) has significantly reduced to 1.55E-02 and 1.91E-03 for adults and children, respectively. Thus, it was determined that irrigation with industrial effluents caused toxicity in vegetables, which had a negative impact on human health. Biochar effectively mitigated metal toxicity in both soil and spinach plants that resulted in reduced health/cancer risk.

Design of Recyclable Adsorbent for Water Pollutants Based on Chitosan-Coated Carboxymethyl Cellulose-Calcium Alginate Wrapped Iron Oxide-Copper Oxide Composite Beads

ABSTRACT In this study, an efficient nanocomposite based on calcium alginate-carboxymethyl cellulose/iron oxide-copper oxide (CA-CMC/Fe2O3-CuO) is developed in beads form and utilized as nanoadsorbent and nanocatalyst. Further, the beads were coated with chitosan, resulting in Cs@CA-CMC/Fe2O3-CuO beads. The prepared beads exhibited exceptional adsorption capabilities for selected heavy metal ions. Notably, the Cs@CA-CMC/Fe2O3-CuO beads displayed remarkable adsorption among the other beads toward the three selected metal ions. Ag(I) was highly adsorbed by Cs@CA-CMC/Fe2O3-CuO beads, and the adsorption capacity of beads was 4.91 mgg−1, while 4.5 mgg−1 and 3.0 mgg−1 for Co(II) and Ni(II), respectively. Beads’ ability to adsorb Ag(I) varied depending on several factors. It was observed that the adsorption capacity of Ag(I) ions increased as the interaction time and metal concentration rose. However, increasing the beads dose led to a decrease in the Ag(I) ion adsorption. Further, the waste beads after Ag(I) adsorption were treated with reducing agent to form beads supported Ag nanoparticles (Ag/Cs@CA-CMC/Fe2O3-CuO) and used as effective catalyst for reducing 4-nitrophenol in the presence of NaBH4 as a reducing agent. Ag/Cs@CA-CMC/Fe2O3-CuO achieved reduction up to 93% for 4-NP within 30 min. The designed nanocomposite beads displayed several desirable attributes, including eco-friendliness and robust catalytic performance, making them highly promising for useful reduction of 4-NP.

Generation and geochemical characteristics of acid rock drainage (ARD) in Barton Peninsula, King George Island (KGI), maritime, Antarctica

This study deals with the generation, geochemical characteristics, and environmental impacts of acid rock drainage (ARD), a global environmental problem, on the Barton Peninsula. To elucidate the governing processes and to assess the environmental hazards of ARD, we present chemical data from lakes, ponds, and creeks with a wide range of pH values. We also provide mineralogical and geochemical compositions of sediments and bedrocks. Compared to weak-acidic and neutral waters, waters that display typical characteristics of ARD with low pH (3.7 to 4.2), high sulfate (46 to 92 mg/L), and Fe (0.8 to 16.5 mg/L) occur in the northern tip of the peninsula. Acidic waters with the highest cation (e.g., K, Na, Si, and Ca) and anion (e.g., SO4) compositions indicate ARD-enhanced rock weathering in the peninsula. Consistently, quantifying of chemical weathering degree yields the highest chemical index of alteration (CIA) and the mafic index of alteration (MIA) with the lowest ICV values for sediments from the acidic waters. Enrichment factors (EFs) calculated for As, Co, Cd, Cu, Pb, Zn, and Ni indicate severe to minor enrichment for As and Pb metals, respectively in the acidic water-associated sediments. Heavy metal concentrations of acidic waters also display the highest values for the peninsula, with Fe, Cu, and Cd metals exceeding the chronic aquatic toxicity limit (CAT). Therefore, geochemical records of acidic waters and sediments, especially lakes, may help in tracing the long-term environmental impacts of ARD, while sediments obtained from the weak acidic and near-neutral waters, together with water chemistry data, may provide a better representative composition of the bedrocks with neutralizing potential. The data presented here may contribute to predicting the source/s, and extent of future ARD generation in the peninsula, which is likely to be enhanced by increased chemical weathering due to climate warming.

Heavy Metals Distribution in Mangrove Leaves in Various Sudanese Coastal Zones at The Red Sea

&lt;p style="text-align:justify;"&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,serif;font-size:10.0pt;line-height:107%;"&gt;Mangrove ecosystem contamination, especially in the Red Sea region, has caused major concerns on a worldwide scale. The heavy metal accumulation typical of a mangrove species, &lt;/span&gt;&lt;em&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,serif;font-size:10.0pt;line-height:107%;"&gt;Avicenna marina&amp;nbsp;&lt;/span&gt;&lt;/em&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,serif;font-size:10.0pt;line-height:107%;"&gt;L. (&lt;/span&gt;&lt;em&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,serif;font-size:10.0pt;line-height:107%;"&gt;A. marina&lt;/span&gt;&lt;/em&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,serif;font-size:10.0pt;line-height:107%;"&gt;) leaves and soluble salts in sediments have not been studied on the Red Sea coast of Sudan.&amp;nbsp; The present study investigates the two nutrients calcium (Ca) and iron (Fe) and heavy metals such as barium (Ba), titanium (Ti), and strontium (Sr) in the mangrove species &lt;/span&gt;&lt;em&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,serif;font-size:10.0pt;line-height:107%;"&gt;A. marina&lt;/span&gt;&lt;/em&gt;&lt;span style="font-family:&amp;quot;Times New Roman&amp;quot;,serif;font-size:10.0pt;line-height:107%;"&gt; in the leaves of six different locations in the Red Sea coastal area, as follows: (Hamasyat (HM)&amp;nbsp;Keligo (KG), and Enkfel (EK) of the Gulf of Dunnabeb, and three sites were selected in the south of the Sudanese coast as follows: (Amarat Island (AM), Ibn Abbas Island (BN), and&amp;nbsp;Ras Kassar (RK). The results demonstrate that the maximum calcium (Ca) and iron (Fe) concentrations in mangrove leaves were 35.9 mg/kg and 4.10 mg/kg recorded at RK and AM, respectively, in the south region of the Red Sea. The heavy metal concentrations (mg/kg) vary between different locations. The higher concentration of heavy metals in mangrove leaves increased as Ba was 1.1 mg/kg in the EG north region. While Ti (0.5 mg/kg) and Sr (2.80 mg/kg) higher concentrations were recorded in AM and EK, respectively, in the south area than in the other experimental sites. &amp;nbsp; Heavy metals and soluble salts in sediments are continuously monitored in mangrove habitats to ensure they keep within allowed limits. These results could be useful as a database for prospective ecological research, preservation efforts, and long-term sustainable management of the Sudanese mangrove ecosystems throughout the Red Sea coastal.&lt;/span&gt;&lt;/p&gt;

Pollution Characteristics, Risk Assessment, and Source Analysis of Heavy Metals in Soil from a Typical Abandoned Antimony Smelting Factory

Considering the surface soil （0-20 cm） from a typical abandoned antimony smelting factory area in Dachang Town, Qinglong County, Guizhou Province, as a case study, a total of 14 soil samples were systematically collected from both within and outside the smelting factory area. The analysis focused on the pollution status, distribution characteristics, and potential ecological risks of heavy metals such as Sb, As, Cd, Cr, Pb, Cu, Zn, Ni, and V in the soil. Additionally, an evaluation and analysis of pollution sources were conducted. The results showed that the mean concentrations of heavy metals including ω（Sb）, ω（As）, ω（Cd）, ω（Cr）, ω（Pb）, ω（Cu）, ω（Zn）, ω（Ni）, and ω（V） in the surface soil of the abandoned antimony smelting factory ranged from 4.58 to 15 049.33 mg·kg-1. With the exception of Cr and Ni, all values exceeded the background values of soils in Guizhou province. The single factor pollution indices of Sb and As were 83.61 and 7.01, respectively, indicating severe contamination. In contrast, Pb fell within the non-polluted to slightly polluted range. The comprehensive potential ecological risk of soil heavy metals was characterized by severe potential ecological risk levels for Sb, As, and Cd, while the remaining heavy metals fell within a range of moderate to substantial potential ecological risk levels. The assessment of the geoaccumulation index revealed that the soil in the study area was primarily contaminated by Sb and As, predominantly exhibiting contamination levels ranging from moderate to severe. The results from the RAC method suggested that Sb was the dominant focus for remediation in this abandoned smelting factory. The two primary pollutants, Sb and As, exhibited elevated levels in leachate toxicity, acid-soluble fraction, available fraction, gastric phase, and intestinal phase in terms of bioavailable content, indicating a certain potential hazard. Further, correlation analysis indicated a certain correlation between the total amount of heavy metals and leachate toxicity, available fraction, acid-soluble fraction, reducible fraction, oxidizable fraction, gastric phase extractable fraction, and intestinal phase extractable fraction. The APCS-MLR model indicated that the sources of Sb, As, Zn, Cu, and Cd were primarily industrial, while the sources of Cr and V were mainly natural, and Pb originated mainly from mixed sources.

Utilizing a medicinal plant and soil assays for heavy metal pollution assessment and its impacts in a Turkish Industrial Zone

Due to the worldwide growth in population, agricultural and industrial activities are expanding quickly, which pollutes the air, water, and soil and leads to the buildup of potentially hazardous substances in medicinal plants. The current study sought to determine the concentrations of various metals in Silybum marianum plants and soils in order to highlight the level of pollution in a Turkish Organized Industrial Zone in Dilovasi District, Kocaeli, and to investigate the effects of these heavy metals on plants. In order to determine the concentrations of elements evaluated within the scope of this study inductively coupled plasma optical emission spectroscopy was employed, due to the benefits of ICP that provides few or no organic molecules, few ionization interferences, as well as the ability to analyze many elements sequentially. Furthermore, in order to evaluate elemental analysis in terms of nutritional values, risk assessments using RDA, EDI, THQ, and HI parameters were conducted. The value of heavy metals in co-located soil samples is relatively high. However, except for Co, Mn, and Ni, it has stayed within the World Health Organization’s permitted limits. The evaluation of the co-located soil samples found that the highest contents (mg kg−1) of Al, Ca, Cd, Cr, Cu, Fe, K, Mn, Na, Ni, Pb, and Zn, were recorded as 7825.10, 4365.86, 4768.59, 2.50, 30.45, 38.49, 8352.00, 17452.26, 1495.82, 1495.82, 163.53, 1452.23, 28.67, 136.55 and 125.45, respectively, belonging to Location 1. These findings are in accordance with the Industrial Status Report since the place specified as Location 1 in the current study is characterized by its pronounced industrial activity and the robust electrical plant station with an industrial facility for generating electric power. Furthermore, the hazard index, the estimated daily intake and target hazard quotient for potentially harmful components and recommended daily allowance values for mineral nutrients were computed. Therefore, even though mineral nutritional values in some areas were found to be higher than Buyukada control location, this should be ignored. Consequently, this study warns against using S. marianum plants as food or medicine collected from current regions. As a result, ongoing inspection is necessary to prevent an excessive buildup of metals in the area and other places with similar human life-related features.

Ecological risk assessment of heavy metals contaminated mining sites of eastern india using soil and moss.

The blooming industrialization and urbanization is leading to increased mining operations. These intensified mining activities emit heavy metals into the environment, posing serious threats to ecosystems. Hence, this study focused on assessing heavy metal pollution in mining soil, utilizing mosses as bioindicators. The ecological risk, geo-accumulation factor, and contamination factor have been calculated to know the harmful effect of heavy metals on ecosystem. The study covered three distinct mining sites of eastern India within Odisha: Jajpur's Sukinda Valley (SP1, Cr), Keonjhar's Joda-Barbil (SP2, Fe and Mn), and Sundargarh's Koira-Joda (SP3, Fe). The collection of 48 soil samples through random sampling revealed significant variations in heavy metal concentrations. SP1 recorded Cr concentration of 6572 ± 445mg/kg and Ni of 8042.47 ± 501.38mg/kg, surpassing eco-toxicological levels. The storage site in SP2 exhibited the highest Fe concentration at 9872 ± 502mg/kg, and Mn levels in SP3 were at 7884 ± 432mg/kg. Storage areas in all three regions held the highest concentrations of heavy metals. Mosses in studied area demonstrated as potential bioindicators for monitoring heavy metal pollution. EF and Igeo assessments showed Cd, Pb, Hg, and other heavy metal contamination compared to earlier investigations. This study indicated higher ecological risks for Pb, As, Cu, Ni, and Zn. The Hyophila involuta accumulates Mn, Cr, Cd, Pb, Fe, and Hg, while Barbula arcuata accumulates Mn, As, and Cu in SP1. Hyophila involuta and Trematodon longicollis accumulate Mn, Cr, Cd, Pb, Fe, Hg, and Zn in SP2. Trematodon ambiguous accumulates Cd, Fe, and Ni, while Fissidens diversifolius accumulates Mn, Cr, Hg, As, Cu, and Zn in SP3. These findings emphasize the necessity of monitoring heavy metal pollution in contaminated zones using moss as a potential bioindicator.