Metal Center Research Articles

Comparison of the lithium storage performance and electrochromic behavior of Prussian blue and its analogues

Nanosized Prussian blue (FeHCF), cobalt hexacyanoferrate (CoHCF), nickel hexacyanoferrate (NiHCF), copper hexacyanoferrate (CuHCF), and zinc hexacyanoferrate (ZnHCF) particles are prepared by facile chemical co-precipitation method. The microstructure of the samples is characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and N2adsorption measurements. The lithium storage behavior and electrochromic performance of the five samples are systematically studied and compared. Among them, FeHCF presents two pairs of distinct charge/discharge plateaus; the other four samples exhibit one pair of charge/discharge plateaus, and plateau potential varies with the change of metal centers. During discharge and charge processes, the color of FeHCF can be reversibly switched in three colors (blue ↔ white ↔ green); while the CoHCF, NiHCF, CuHCF, and ZnHCF can be reversibly switched in two different colors corresponding to green ↔ red, yellow ↔ colorless, yellow brown ↔ dark red, and light yellow ↔ colorless, respectively. The results reported in this work could be helpful for rational design and performance regulation of Prussian blue analogues as electrochemical energy storage and electrochromic bifunctional materials.

Square‐Planar Copper(II) complexes from a Zwitterionic Schiff‐Base N2/N22‐‐Donor Ligand: DNA Interaction and Cytotoxicity

A new tetradentate ligand, namely 3,3'‐((1E,1'E)‐(ethane‐1,2‐diylbis(azaneylylidene))bis(methaneylylidene))bis(pyridin‐2‐amine) (en2ampy) was prepared and two copper(II) complexes, viz. [Cu(en2ampy)]Cl2 (1) and [Cu(en2ampy)](NO3)2 (2), were obtained through its reaction with copper(II) chloride and copper(II) nitrate, respectively. The single‐crystal X‐ray structure of the compounds showed that the metal centre was coordinated in a square‐planar fashion by a doubly deprotonated en2ampy acting as a tetradentate N2/N22‐‐donor ligand. DNA‐binding studies revealed that 1 and 2 were electrostatically binding to DNA, probably in the grooves and cytotoxicity assays showed that the complexes were clearly more efficient than cisplatin against ovarian carcinoma (A2780) cells and the cisplatin‐resistant (A2780Cis) ones.

Fluorescein@NH2-UiO-66 Probe for Ratiometric Fluorescence Sensing of Trace Phosphate in Water

Abstract Phosphate pollution leads to deterioration in water quality, posing a serious threat to human health. Therefore, it is important to develop a highly selective and sensitive fluorescent probe for phosphate detection. Here, we report a novel ratiometric fluorescent probe, Fluorescein@NH2-UiO-66 (denoted as Flu@NH2-UiO-66), for the trace detection of phosphate in water. Specifically, during the in-situ solvothermal synthesis of Flu@NH2-UiO-66, fluorescein molecules were encapsulated into the cavities of the metal-organic framework. Furthermore, the encapsulation amount of fluorescein was controlled by adjusting the acidity of the system. The Flu@NH2-UiO-66 (60 H+) sample, prepared with a 60:1 molar ratio of acetic acid to the metal center exhibited distinct dual fluorescence signal peaks. The probe showed a highly selective fluorescence response to phosphate. Within a range of 0-20 μM phosphate concentration, the probe demonstrated excellent linear detection capability with a detection limit of 0.37 μM. Moreover, the mechanism of fluorescence enhancement can be attributed to the addition of phosphate, which greatly increases the UV absorbance of the probe. This study developed a novel ratiometric fluorescent probe capable of rapid, sensitive, and stable detection of trace phosphate, which is of great significance for environmental management.

Mechanistic understanding of the acceptorless dehydrogenation reaction catalyzed by low valent Co(I) complex

Coordination complexes based on the first-row transition metal play pivotal role in homogenous catalysis. However, the variable oxidation states and complicated electronic configurations of first-row transition metal centers result in the ambiguous mechanism. Herein, focusing on a typical Co(Ⅰ)-PNP pincer catalyst developed by Madsen et al. (Chemcatchem, 11 (2019) 2707–2712.), the diversity of mechanistic scenarios caused by low valent cobalt complex is displayed and the competition of each plausible reaction pathways were investigated based on density functional theory (DFT) calculation. The calculated results suggest that the MLC mechanism mediated by Co(I) center prevails in different stage among all possible reaction pathways. Further analysis using the activation strain model elucidates the dual active sites in MLC mechanism leads to a higher interaction energy compared with the Co(I/III) mechanism, in which the reaction basically occurs on the metal center. However, in the high spin state, the metal and the ligand cooperate to provide more interaction energy in the activation of chemical bonds, thereby reducing the activation energy barrier. These theoretical findings are anticipated to enhance current understanding of homogeneous catalysis based on 3d low valent metal centers.

Mechanism of Peroxynitrite Interaction with Ferric M. tuberculosis Nitrobindin: A Computational Study.

Nitrobindins (Nbs) are all-β-barrel heme proteins present along the evolutionary ladder. They display a highly solvent-exposed ferric heme group with the iron atom being coordinated by the proximal His residue and a water molecule at the distal position. Ferric nitrobindins (Nb(III)) play a role in the conversion of toxic peroxynitrite (ONOO-) to harmless nitrate, with the value of the second-order rate constant being similar to those of most heme proteins. The value of the second-order rate constant of Nbs increases as the pH decreases; this suggests that Nb(III) preferentially reacts with peroxynitrous acid (ONOOH), although ONOO- is more nucleophilic. In this work, we shed light on the molecular basis of the ONOO- and ONOOH reactivity of ferric Mycobacterium tuberculosis Nb (Mt-Nb(III)) by dissecting the ligand migration toward the active site, the water molecule release, and the ligand binding process by computer simulations. Classical molecular dynamics simulations were performed by employing a steered molecular dynamics approach and the Jarzynski equality to obtain ligand migration free energy profiles for both ONOO- and ONOOH. Our results indicate that ONOO- and ONOOH migration is almost unhindered, consistent with the exposed metal center of Mt-Nb(III). To further analyze the ligand binding process, we computed potential energy profiles for the displacement of the Fe(III)-coordinated water molecule using a hybrid QM/MM scheme at the DFT level and a nudged elastic band approach. These results indicate that ONOO- exhibits a much larger barrier for ligand displacement than ONOOH, suggesting that water displacement is assisted by protonation of the leaving group by the incoming ONOOH.

Tuning Two-Dimensional Phthalocyanine Dual Site Metal-Organic Framework Catalysts for the Oxygen Reduction Reaction.

Metal-organic frameworks (MOFs) offer an interesting opportunity for catalysis, particularly for metal-nitrogen-carbon (M-N-C) motifs by providing an organized porous structural pattern and well-defined active sites for the oxygen reduction reaction (ORR), a key need for hydrogen fuel cells and related sustainable energy technologies. In this work, we leverage electrochemical testing with computational models to study the electronic and structural properties in the MOF systems and their relationship to ORR activity and stability based on dual transitional metal centers. The MOFs consist of two M1 metals with amine nodes coordinated to a single M2 metal with a phthalocyanine linker, where M1/M2 = Co, Ni, or Cu. Co-based metal centers, in particular Ni-Co, demonstrate the highest overall activity of all nine tested MOFs. Computationally, we identify the dominance of Co sites, relative higher importance of the M2 site, and the role of layer M1 interactions on the ORR activity. Selectivity measurements indicate that M1 sites of MOFs, particularly Co, exhibit the lowest (<4%), and Ni demonstrates the highest (>46%) two-electron selectivity, in good agreement with computational studies. Direct in situ stability characterization, measuring dissolved metal ions, and calculations, using an alkaline stability metric, confirm that Co is the most stable metal in the MOF, while Cu exhibits notable instability at the M1. Overall, this study reveals how atomistic coupling of electronic and structural properties affects the ORR performance of dual site MOF catalysts and opens new avenues for the tunable design and future development of these systems for practical electrochemical applications.

Hydrogen Sulfide-Induced Activatable Photodynamic Therapy Adjunct to Disruption of Subcellular Glycolysis in Cancer Cells by a Fluorescence-SERS Bimodal Iridium Metal-Organic Hybrid.

The practical application of photodynamic therapy (PDT) demands targeted and activatable photosensitizers to mitigate off-target phototoxicity common in "always on" photosensitizers during light exposure. Herein, a cyclometalated iridium complex-based activatable photodynamic molecular hybrid, Cy-Ir-7-nitrobenzofurazan (NBD), is demonstrated as a biomedicine for molecular precision. This design integrates a hydrogen sulfide (H2S)-responsive NBD unit with a hydroxy-appended iridium complex, Cy-Ir-OH. In normal physiological conditions, the electron-rich Ir metal center exerts electron transfer to the NBD unit, quenches the excited state dynamics, and establishes a PDT-off state. Upon exposure to H2S, Cy-Ir-NBD activates into the potent photosensitizer Cy-Ir-OH through nucleophilic substitution. This mechanism ensures exceptional specificity, enabling targeted phototherapy in H2S-rich cancer cells. Additionally, we observed that Cy-Ir-NBD-induced H2S depletion disrupts S-sulfhydration of the glyceraldehyde-3-phosphate dehydrogenase enzyme, impairing glycolysis and ATP production in the cellular milieu. This sequential therapeutic process of Cy-Ir-NBD is governed by the positively charged central iridium ion that ensures mitochondria-mediated apoptosis in cancer cells. Dual-modality SERS and fluorescence imaging validate apoptotic events, highlighting Cy-Ir-NBD as an advanced theranostic molecular entity for activatable PDT. Finally, as a proof of concept, clinical assessment is evaluated with the blood samples of breast cancer patients and healthy volunteers, based on their H2S overexpression capability through SERS and fluorescence, revealing Cy-Ir-NBD to be a promising predictor for PDT activation in advanced cancer phototherapy.

Computational Analysis of Low Overpotential Ammonia Oxidation by Metal-Metal Bonded Ruthenium Catalysts, and Predictions for Related Osmium Catalysts.

The catalyzed electrochemical oxidation of ammonia to nitrogen (AOR) is an important fuel-cell half-reaction that underpins a future nitrogen-based energy economy. Our laboratory has reported spontaneous chemical and electrochemical oxidation of ammonia to dinitrogen via reaction of ammonia with the metal-metal bonded diruthenium complex Ru2(chp)4OTf (chp- = 2-chloro-6-hydroxypyridinate, TfO- = trifluoromethanesulfonate). This complex facilitates electrocatalytic ammonia oxidation at mild applied potentials of -255 mV vs ferrocene, which is the [Ru2(chp)4(NH3)]0/+ redox potential. We now report a comprehensive computational investigation of possible mechanisms for this reaction and electronic structure analysis of key intermediates therein. We extend this analysis to proposed second-generation electrocatalysts bearing structurally similar fhp and hmp (2-fluoro-6-hydroxypyridinate and 2-hydroxy-6-methylpyridinate, respectively) equatorial ligands, and we further expand this study from Ru2 to analogous Os2 cores. Predicted M24+/5+ redox potentials, which we expect to correlate with experimental AOR overpotential, depend strongly on the identity of the metal center, and to a lesser degree on the nature of the equatorial supporting ligand. Os2 complexes are easier to oxidize than analogous Ru2 complexes by ∼640 mV, on average. In contrast to mono-Ru catalysts, which oxidize ammonia via a rate-limiting activation of the strong N-H bond, we find lowest-energy reaction pathways for Ru2 and Os2 complexes that involve direct N-N bond formation onto electrophilic intermediates having terminal amido, imido, or nitrido groups. While transition state energies for Os2 complexes are high, those for Ru2 complexes are moderate and notably lower than those for mono-Ru complexes. We attribute these lower barriers to enhanced electrophilicity of the Ru2 intermediates, which is a consequence of their metal-metal bonded structure. Os2 intermediates are found to be, surprisingly, less electrophilic, and we suggest that Os2 complexes may require access to oxidation states higher than Os25+ in order to perform AOR at reasonable reaction rates.

Addition of Imidazolium-Based Ionic Liquid to Improve Methanol Production in Polyamine-Assisted CO2 Capture and Conversion Systems Using Pincer Catalysts.

Ionic liquids have been studied as CO2 capture agents. However, they are rarely used in combined CO2 capture and conversion processes. Utilizing imidazolium-based ionic liquids, the conversion of CO2 to methanol was greatly improved in polyamine assisted systems catalyzed by homogeneous pincer catalysts with Ru and Mn metal centers. Among the ionic liquids tested, [BMIM]OAc was found to perform the best under the given reaction conditions. Among the polyamine tested, pentaethylenehexamine (PEHA) led to the highest conversion rates. Ru-Macho and Ru-Macho-BH were the most active catalysts. Direct air capture utilizing PEHA as the capture material was also demonstrated and produced an 86 % conversion of the captured CO2 to methanol in the presence of [BMIM]OAc.

Supramolecular Assemblies in Mn(II) and Zn(II) Metal–Organic Compounds Involving Phenanthroline and Benzoate: Experimental and Theoretical Studies

Two new Mn(II) and Zn(II) metal–organic compounds of 1,10-phenanthroline and methyl benzoates viz. [Mn(phen)2Cl2]2-ClBzH (1) and [Zn(4-MeBz)2(2-AmPy)2] (2) (where 4-MeBz = 4-methylbenzoate, 2-AmPy = 2-aminopyridine, phen = 1,10-phenanthroline, 2-ClBzH = 2-chlorobenzoic acid) were synthesized and characterized using elemental analysis, TGA, spectroscopic (FTIR, electronic) and single crystal X-ray diffraction techniques. The crystal structure analysis of the compounds revealed the presence of various non-covalent interactions, which provides stability to the crystal structures. The crystal structure analysis of compound 1 revealed the formation of a supramolecular dimer of 2-ClBzH enclathrate within the hexameric host cavity formed by the neighboring monomeric units. Compound 2 is a mononuclear compound of Zn(II) where flexible binding topologies of 4-CH3Bz are observed with the metal center. Moreover, various non-covalent interactions, such as lp(O)-π, lp(Cl)-π, C–H∙∙∙Cl, π-stacking interactions as well as N–H∙∙∙O, C–H∙∙∙O and C–H∙∙∙π hydrogen bonding interactions, are found to be involved in plateauing the molecular self-association of the compounds. The remarkable enclathration of the H-bonded 2-ClBzH dimer into a supramolecular cavity formed by two [Mn(phen)2Cl2] complexes were further studied theoretically using density functional theory (DFT) calculations, the non-covalent interaction (NCI) plot index and quantum theory of atoms in molecules (QTAIM) computational tools. Synergistic effects were also analyzed using molecular electrostatic potential (MEP) surface analysis.

Designing a Phenalenyl-Based Dinuclear Ni(II) Complex: An Electrocatalyst with Two Single Ni Sites for the Oxygen Evolution Reaction (OER).

A new dinuclear Ni(II) complex 1, [Ni2II(dtbh-PLY)2], is synthesized from 9-(2-(3,6-di-tert-butyl-2-hydroxybenzylidene)hydrazineyl)-1H-phenalen-1-one, dtbh-PLYH2 ligand, and structurally characterized by various analytical tools including the single-crystal X-ray diffraction (SCXRD) technique. In the solid state, both Ni(II) metal centers in complex 1 exist in a distorted square planar geometry and display the presence of rare Ni···H-C anagostic interactions to form a one-dimensional (1-D) linear motif in the supramolecular array. Complex 1 is further stabilized in the solid state by π-π-stacking interactions between the highly delocalized phenalenyl rings. The redox features of complex 1 have been analyzed by the cyclic voltammetry (CV) technique in solution as well as in the solid state, revealing the crucial involvement of both the Ni(II) metal centers for undergoing quasi-reversible oxidation reactions on the application of an anodic sweep. A complex 1-modified glassy carbon electrode, GC-1, is employed as an electrocatalyst for oxygen evolution reaction (OER) in 1.0 M KOH, giving an OER onset at 1.45 V, and very low OER overpotential, 300 mV vs the reversible hydrogen electrode (RHE) to reach 10 mA cm-2 current density. Furthermore, GC-1 displayed fast OER kinetics with a Tafel slope of 40 mV dec-1, a significantly lower Tafel slope value than those of previously reported molecular Ni(II) catalysts. In situ electrochemical experiments and postoperational UV-vis, Fourier transform infrared (FT-IR), scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS) studies were performed to analyze the stability of the molecular nature of complex 1 and to gain reasonable insights into the true OER catalyst.

Atomically Dispersed p-Block Aluminum-Based Catalysts for Oxygen Reduction Reaction.

The main group metals are commonly perceived as catalytically inert in the context of oxygen reduction reactions (ORR) due to the delocalized valence orbitals. Regulating the local environment and structure of metal center coordinated by nitrogen ligands (M-Nx) is a promising approach to accelerate catalytic dynamics. Herein, we, for the first time, report the atomically dispersed Al catalysts coordinated with N and C atoms for 4-electron ORR. The axial coordinated pyrrolyl N group (No) is constructed in the Al-N4-No moiety to regulate the p-band structure of Al center, effectively steering the local environment and structure of the square planar Al-N4 sites, which typically exhibit too strong interaction with ORR intermediates. The dynamic covalency competition of axial Al-No and Al-O bonding could endow the Al center with moderate hybridization between Al 3p orbital and O 2p orbital, alleviating the binding energy of ORR intermediates. The as-prepared Al-N4-No electrocatalyst exhibits excellent ORR activity, selectivity, and durability, along with the rapid kinetics as demonstrated by in situ Raman spectroscopy. This work offers a fundamental comprehension of the fine regulation on p-band and guides the rational design of main-group metal-based single atom catalysts.

Insights into Dopant-Mediated Tuning of Silica-Supported Mo Metal Centers for Enhanced Olefin Metathesis

Insights into Dopant-Mediated Tuning of Silica-Supported Mo Metal Centers for Enhanced Olefin Metathesis

High-Entropy Lanthanide-Organic Framework as an Efficient Heterogeneous Catalyst for Cycloaddition of CO2 with Epoxides and Knoevenagel Condensation.

Multimetallic synergistic effects have the potential to improve CO2 cycloesterification and Knoevenagel reaction processes, outperforming monometallic MOFs. The results demonstrate superior performance in these processes. To investigate this, we created and characterized a selection of single-component Ln(III)-MOFs (Ln = Eu, Tb, Gd, Dy, Ho) and high-entropy lanthanide-organic framework (HE-LnMOF) using solvent-thermal conditions. The experiments revealed that HE-LnMOF exhibited heightened catalytic efficiency in CO2 cycloesterification and Knoevenagel reactions compared to single-component Ln(III) MOFs. Moreover, the HE-LnMOF displayed significant stability, maintaining their structural integrity after five cycles while sustaining elevated conversion and selectivity rates. The feasible mechanisms of catalytic reactions were also discussed. HE-LnMOF possess multiple unsaturated metal centers, acting as Lewis acid sites, with oxygen atoms connecting the metal, and hydroxyl groups on the ligand serving as base sites. This study introduces a novel method for synthesizing HE-LnMOF and presents a fresh application of HE-LnMOF for converting CO2.

AcSac, SacSac, and SacNac, the Forgotten Sulfur‐Based Ligands and their Reactivity in the Formation of Main and Transition Metal Complexes

AcAc (β‐acetylacetonate) are among the first ligands ever, to be studied. They all form stable complexes with most metals. During the 1960s, their sulfur derivatives were introduced; AcSac (β‐thioketonate), SacSac (β‐dithioketonate) and SacNac (β‐thioketoiminate). These derivatives were conferred contrasting reactivity, stereochemical, magnetic and spectral properties to their formed complexes. Later, sulfur‐ligands were at their pinnacle in the early 1970s, but their fall into disuse was due to the lack of methodologies for obtaining them and the lack of synthetic tools for their structural modification. As an effort to promote the study and application of these sulfur‐ligands; this review will address its history, the properties they bring to the metal centers and their potential applications.

Characterization of Deformational Isomerization Potential and Interconversion Dynamics with Ultrafast X-ray Solution Scattering.

Dimeric complexes composed of d8 square planar metal centers and rigid bridging ligands provide model systems to understand the interplay between attractive dispersion forces and steric strain in order to assist the development of reliable methods to model metal dimer complexes more broadly. [Ir2 (dimen)4]2+ (dimen = para-diisocyanomenthane) presents a unique case study for such phenomena, as distortions of the optimal structure of a ligand with limited conformational flexibility counteract the attractive dispersive forces from the metal and ligand to yield a complex with two ground state deformational isomers. Here, we use ultrafast X-ray solution scattering (XSS) and optical transient absorption spectroscopy (OTAS) to reveal the nature of the equilibrium distribution and the exchange rate between the deformational isomers. The two ground state isomers have spectrally distinct electronic excitations that enable the selective excitation of one isomer or the other using a femtosecond duration pulse of visible light. We then track the dynamics of the nonequilibrium depletion of the electronic ground state population─often termed the ground state hole─with ultrafast XSS and OTAS, revealing a restoration of the ground state equilibrium in 2.3 ps. This combined experimental and theoretical study provides a critical test of various density functional approximations in the description of bridged d8-d8 metal complexes. The results show that density functional theory calculations can reproduce the primary experimental observations if dispersion interactions are added, and a hybrid functional, which includes exact exchange, is used.

Reversible Capture Mechanism of CO2 as a Zn(II)-Methylcarbonate.

In this study, we elucidate the reaction mechanism for capturing CO2 with the ZnL1(MeOH) complex (L1 = diacetyl-2-(4-methyl-3-thiosemicarbazone)-3-(2-hydrazinatopyridine)) in a methanol solution, using density functional theory calculations. One pathway involves the protonation of ZnL1(MeOH) by methylcarbonic acid, followed by ligand exchange of MeOH with MeOCO2-. An alternative mechanism suggests a tautomerization between ZnL1(MeOH) and Zn(HL1)(OMe), followed by CO2 insertion. This latter pathway is energetically more favorable than the former and more complex than initially proposed. In fact, we unveiled that the solvent catalyzes tautomerization, as one explicit methanol molecule acts as a proton transfer agent. Then, Zn(HL1)(OMe) captures CO2, yielding a methylcarbonate bound to the metal center. The final step involves a rearrangement that leads to the cleavage of the Zn-O(Me)(COO) bond and the formation of a new Zn-O(COOMe) bond, along with the rotation of the methylcarbonate group. Furthermore, we evaluated the ligand basicity through the pKa calculated values of the Zn(II) complexes, the effects of varying the ligand from 4-methyl-thiosemicarbazone to 4-ethyl (L2), 4-phenethyl (L3), and 4-benzyl (L4) derivatives, and reversibility of the reaction in an argon environment.

Investigating the influence of copper benzene-1,2-dicarboxylate (Cu-BDC) and benzene-1,3,5-tricarboxylate ligands (Cu-BTC) on the electrochemical capacity of hybrid supercapacitors

The elevated energy demand and crises have rooted the urge to develop advanced electrode materials that can overcome the energy dilemma present all over the globe. Metal-organic frameworks (MOFs) have emerged as promising electrode materials in recent times due to their better electrochemical properties. Herein the metal ligand synergy produced in MOFs is observed for the same metal center (Cu) with different ligands i.e., benzene-1,3,5-tricarboxylate (1,3,5-BTC) and benzene-1,2-dicarboxylate (1,2-BDC). The hybrid device of the best performing MOF (Cu-1,3,5-BTC//AC) reveals the energy and power density of 88.32 Wh kg−1 and 680 W kg−1, respectively. Even at the highest current density of 15 A/g, the device retained the Es of 21.25 Wh kg−1 and Ps of 12,750 W kg−1. Furthermore, the semi-empirical approach was utilized for the evaluation of capacitive and diffusive contributions.

Investigation of half-sandwich platinum group metal complexes featuring benzamide derived ligands and their diazido derivatives: Synthesis, molecular structures and biological studies

Benzamide derivative ligands L1 and L2 were synthesized and reactions of these ligands with metal dimers [Ru(p-cymene)Cl2]2 and [Cp*MCl2]2 (M = Rh/Ir) yielded a series of “piano-stool”-type neutral mononuclear metal-arene-benzamide complexes (1, 2, 3, 4, 5 and 6) of the general formula [(arene)M(κ1(N)L)Cl2] (where arene = p-cymene and Cp*, M = Ru, Rh and Ir and L = L1 and L2). Further treatment of the neutral complexes 1-6 with sodium azide in methanol resulted in the formation of diazido complexes 7, 8, 9 and 10. Crystallographic studies of the complexes 2, 5, 7 and 8 revealed the ligands coordinated to the metal centers through the nitrogen atom of thiazole/thiadiazole ring in a monodentate fashion. The complexes were characterized by NMR, FTIR, UV-Vis spectroscopy and ESI-mass spectrometry. All the ligands and metal complexes were screened for their antibacterial and antioxidant activities. Interestingly, it was observed that only the diazido complexes were active towards the Gram-positive Staphylococcus aureus bacterial strains, with activities more than the standard. Antioxidant study revealed that the compounds possess insignificant activities.

Self-Assembled Conjugated Coordination Polymer Nanorings: Role of Morphology and Redox Sites for the Alkaline Electrocatalytic Oxygen Evolution Reaction.

Electrocatalytic water splitting provides a sustainable method for storing intermittent energies, such as solar energy and wind, in the form of hydrogen fuel. However, the oxygen evolution reaction (OER), constituting the other half-cell reaction, is often considered the bottleneck in overall water splitting due to its slow kinetics. Therefore, it is crucial to develop efficient, cost-effective, and robust OER catalysts to enhance the water-splitting process. Transition-metal-based coordination polymers (CPs) serve as promising electrocatalysts due to their diverse chemical architectures paired with redox-active metal centers. Despite their potential, the rational use of CPs has faced obstacles including a lack of insights into their catalytic mechanisms, low conductivity, and morphology issues. Consequently, achieving success in this field requires the rational design of ligands and topological networks with the desired electronic structure. This study delves into the design and synthesis of three novel conjugated coordination polymers (CCPs) by leveraging the full conjugation of terpyridine-attached flexible tetraphenylethylene units as electron-rich linkers with various redox-active metal centers [Co(II), Ni(II), and Zn(II)]. The self-assembly process is tuned for each CCP, resulting in two distinct morphologies: nanosheets and nanorings. The electrocatalytic OER performance efficiency is then correlated with factors such as the nanostructure morphology and redox-active metal centers in alkaline electrolytes. Notably, among the three morphologies studied, nanorings for each CCP exhibit a superior OER activity. Co(II)-integrated CCPs demonstrate a higher activity between the redox-active metal centers. Specifically, the Co(II) nanoring morphology displays exceptional catalytic activity for OER, with a lower overpotential of 347 mV at a current density of 10 mA cm-2 and small Tafel slopes of 115 mV dec-1. The long-term durability is demonstrated for at least 24 h at 1.57 V vs RHE during water splitting. This is presumably the first proof that links the importance of nanostructure morphologies to redox-active metal centers in improving the OER activity, and it may have implications for other transdisciplinary energy-related applications.