Cationic Metal Complexes Research Articles

A Gold Rush: Designing Hydrogels for Selective Recovery in Wastewater Containing Mixed Metal Ions.

The use of synthetic hydrogels in wastewater treatment represents a promising and scalable approach to achieving clean water. By modulation of their chemical structure, hydrogels can effectively remove a wide range of toxic compounds, including emerging organic pollutants and heavy metals. For the latter, recovery is essential for both environmental protection and metal recycling. The increasing demand for gold, a nonrenewable metal widely used in many technologies, calls for methods for its selective recovery from complex metal cation solutions. This study explores easy-to-make poly(acrylamide-co-acrylic acid) hydrogels as adsorbents for gold recovery from industrial wastewater containing other precious metals. Such material can reduce gold cations into elemental nanoparticles and microparticles in acid environments at room temperature. This process offers a potential route for metal recovery that is not based on weak interaction or complex formation. Batch tests demonstrate a good adsorption capacity (up to 124 mg/g) and efficient separation from other precious metal ions (Ru, Ir, Pd, Pt, and Rh) in a solution that closely mimics realistic industrial waste conditions. These hydrogels would enable gold recovery also from other complex metal solutions, including those derived from the dissolution of electronic wastes.

Electrostatic Confinement‐Induced Excited Charge Transfer in Ionic Covalent Organic Framework Promoting CO2 Reduction

We demonstrate an electrostatic confinement‐induced charge transfer pathway in a supramolecular photocatalyst comprising of an ionic covalent organic framework (COF) and cationic metal complexes. The dynamic electrostatic interactions not only attract cations around the COF to accept photogenerated electrons, but also allows for a retention of homogeneous catalytic characters of complexes, making a subtle balance. Accordingly, the electrostatic confinement effect facilitates the forward electron transfer from a photoexcited COF to cationic Co complex, realizing a remarkable photocatalytic CO2 reduction performance. Its catalytic efficiency is far superior to the supramolecular counterparts with Van‐der‐Waals or hydrogen bonding interactions. This work presents an insight for enhancing charge transfer in supramolecular systems, and provides an effective approach for construction of highly efficient photocatalysts.

Three Metal Complex‐Decorated Halobismuthates: Syntheses, Structures, Semiconducting Behaviors and Theoretical Investigations

AbstractEmploying metal complex cations as the structural modifiers, three new numbers of hybrid halobismuthates family, namely [NH4][Co(phen)3]BiI6 (phen=1,10‐phenanthroline; 1), [Zn(phen)2Br][Bi(phen)Br4] ⋅ H2O (2) and [Cu(2,2′‐bipy)2Br][Cu(2,2′‐bipy)2Bi2Br9] ⋅ H2O (2,2′‐bipy=2,2′‐bipyridine; 3) have been solvothermally constructed and structurally characterized. X‐ray crystallography analyses show that all compounds characteristic of abundant weak interactions feature the discrete anionic motifs. The obtained hybrid materials possess the semiconducting nature, with the visible light responding optical band gaps of 2.13–2.71 eV. Under the alternating light irradiation, they exhibit excellent photoelectric switching properties, whose photocurrent densities (0.85, 0.24, and 0.43 μA/cm2 for compounds 1–3, respectively) compare well with some high‐performance halobismuthate competitors. Further theoretical calculations of compound 1 reveal that the photosensitive [Co(phen)3]2+ cations contribute greatly to the bottom of conduction bands (CBs) and the top of valence bands (VBs), which may be the important reason for its excellent photoelectric behavior. The analyses of Hirshfeld surface, thermal stability, and X‐ray photoelectron spectroscopy were also discussed detailedly in this paper.

1D Lead Bromide Hybrids Directed by Complex Cations: Syntheses, Structures, Optical and Photocatalytic Properties.

This study presents the synthesis, structural characterization, and evaluation of the photocatalytic performance of two novel one-dimensional (1D) lead(II) bromide hybrids, [Co(2,2'-bpy)3][Pb2Br6CH3OH] (1) and [Fe(2,2'-bpy)3][Pb2Br6] (2), synthesized via solvothermal reactions. These compounds incorporate transition metal complex cations as structural directors, contributing to the unique photophysical and photocatalytic properties of the resulting materials. Single-crystal X-ray diffraction analysis reveals that both compounds crystallize in monoclinic space groups with distinct 1D lead bromide chain configurations influenced by the nature of the complex cations. Optical property assessments show band gaps of 3.04 eV and 2.02 eV for compounds 1 and 2, respectively, indicating their potential for visible light absorption. Photocurrent measurements indicate a significantly higher electron-hole separation efficiency in compound 2, correlated with its narrower band gap. Additionally, photocatalytic evaluations demonstrate that while both compounds degrade organic dyes effectively, compound 2 also exhibits notable hydrogen evolution activity under visible light, a property not observed in 1. These findings highlight the role of metal complex cations in tuning the electronic and structural properties of lead(II) bromide hybrids, enhancing their applicability in photocatalytic and optoelectronic devices.

Structures and unimolecular chemistry of alkali metal cation complexes with glutathione in the gas phase

This study investigates the unimolecular reactions of glutathione complexes with alkali metal cations in the gas phase through sustained off-resonance irradiation collision-induced dissociation and examines their structures using a combination of infrared multiphoton dissociation spectroscopy and computational techniques. Under soft CID conditions, glutathione complexes with charge-dense cations such as Li⁺, Na⁺, and K⁺ show significant fragmentation of glutathione, while complexes with heavier cations, Rb⁺ and Cs⁺, primarily undergo loss of glutathione. This behavior is attributed to the stronger non-covalent binding between smaller metal cations and glutathione, which competes with the dissociation thresholds of covalent interactions within the peptide complex. Using CREST, a tool for determining trial structures which were submitted to density functional theory calculations, a thorough investigation of the conformational space revealed many possible structures, including pentacoordinated structures for the Na⁺ and K⁺ complexes, as well as tetra-tri-, bi-, and monocoordinated structures along with zwitterionic structures for all metal cation/GSH complexes. For all alkali metal cation complexes, the thermodynamically most stable structures were found to be tetracoordinated A-type structures where the metal cation is bound to the amine nitrogen and three of the carbonyl oxygens—all except O2, the amide between glycine and cysteine. These computed infrared spectra for these lowest energy complexes were also consistent with the experimental vibrational spectra in the fingerprint region. Based on relative energies and the comparison of computed and experimental infrared spectra in the fingerprint region, the tetracoordinate A-type structures are concluded to be the dominant forms of the [M(GSH)]+ complexes in the gas phase.

Theoretical Studies on the Insertion Reaction of Polar Olefinic Monomers Mediated by a Scandium Complex

This study aimed to investigate the insertion reaction of the polar monomers mediated by the cationic rare earth metal complex [(C5H5)Sc(NMe2CH2C6H4-o)]+ utilizing a combination of density functional theory (DFT) calculations and multivariate linear regression (MLR) methods. The chain initiation step of the insertion reaction could be described by the poisoning effect and the ease of monomer insertion, which could be represented via the DFT-calculated energy difference between σ- and π-coordination complexes (ΔΔE) and insertion energy barrier (ΔG≠), respectively. The results indicate that ΔΔE and ΔG≠ can be predicted by only several descriptors using multiple linear regression methods, with a root mean squared error (RMSE) of less than 2.5 kcal/mol. Furthermore, the qualitative analysis of the MLR models provided effective information on the key factors governing the insertion reaction chain initiation.

The Self-Assembly of Cationic Metal Complexes on Gold Nanoparticle Surface.

This work aims to study the interaction between cationic metal complexes (M z +) and gold nanoparticles (AuNPs z- ). The M z + complexes were chosen from previous works described in the literature and were synthesized as defined. For example, they are as follows: 1 = [RuCl(dppb)(bipy)(py)](PF6); 2 = [RuCl(dppb)(bipy)(vpy)](PF6); 3 = [RuCl(dppb)(bipy)(mepy)](PF6); 4 = [RuCl(dppb)(bipy)(tbpy)](PF6); 5 = [RuCl2(dppb)(bipy)](PF6); 6 = [Fe(bipy)3]Cl2; 7 = [Ru(bipy)3](PF6)2; 8 = [TPyP{RuCl(dppb)(bipy)}4](PF6)4; and 9 = [RuCl(p-cymene)(Diipmp)](PF6). The interactions between M z + and AuNPs z- were carried out using conductometry and UV-vis spectroscopy. These experiments allowed determination of kinetic parameters, revealing three different steps in the interaction process: induction time, flocculation, and agglomeration. The self-assembly between M z + and AuNPs z- was investigated using three different models of binding site, namely, Langmuir or direct plot, Benesi-Hildebrand, and Scatchard. These models provide the fraction of total binding sites occupied (θ), the formation constant (K f), which is dependent on the temperature and geometric structure of each group of M z +, and the Gibbs free energy of reaction (ΔG r ), which was negative for each pair of M z + and AuNPs z- , revealing a spontaneous agglomeration process. The Hill coefficient (n) was 1 for almost all complexes, indicating that agglomeration is an independent process, except for 5, where n = 2, suggesting a positive propensity to bind onto the AuNPs z- surface. The models have confirmed a noncovalent interaction between these species. The relative error in site binding does not show any variation with changes in the temperature, but a fine-tuning of the n value to 1.00 was observed with the increase of the temperature. Finally, the reduction reaction of the 4-nitrophenolate anion (4-NP-) by NaBH4 catalyzed by AuNPs z- was used in the presence of M z + as an evaluation test to show how the M z + species will disturb the 4-NP- binding site on the surface of gold nanoparticles.

Transition Metal‐Free Catalytic C−H Zincation and Alumination

AbstractC−H metalation is the most efficient method to prepare aryl–zinc and –aluminium complexes that are ubiquitous nucleophiles. Virtually all C−H metalation routes to form Al/Zn organometallics require stoichiometric, strong Brønsted bases with no base‐catalyzed reactions reported. Herein we present a catalytic in amine/ammonium salt (Et3N/[(Et3N)H]+) C−H metalation process to form aryl‐zinc and aryl‐aluminium complexes. Key to this approach is coupling an endergonic C−H metalation step with a sufficiently exergonic dehydrocoupling step between the ammonium salt by‐product of C−H metalation ([(Et3N)H]+) and a Zn−H or Al−Me containing complex. This step, forming H2/MeH, makes the overall cycle exergonic while generating more of the reactive metal electrophile. Mechanistic studies supported by DFT calculations revealed metal‐specific dehydrocoupling pathways, with the divergent reactivity due to the different metal valency (which impacts the accessibility of amine‐free cationic metal complexes) and steric environment. Notably, dehydrocoupling in the zinc system proceeds through a ligand‐mediated pathway involving protonation of the β‐diketiminate Cγ position. Given this process is applicable to two disparate metals (Zn and Al), other main group metals and ligand sets are expected to be amenable to this transition metal‐free, catalytic C−H metalation.

Fluoride Abstraction Induced by Tris(pentafluoroethyl)difluorophosphorane: A Convenient Way to Synthesize Cationic N-Heterocyclic Carbene- and Cyclic (Alkyl)(amino)carbene-Ligated Copper Alkyne and Arene Complexes.

We herein report the convenient synthesis of different N-heterocyclic carbene (NHC)- and cyclic (alkyl)(amino)carbene (cAAC)-ligated copper cations using the weakly coordinating tris(pentafluoroethyl)trifluorophosphate counterion (FAP anion, [(C2F5)3PF3]-). The reaction of the fluorido complexes [(carbene)CuF] (carbene = NHC, cAACMe) 2a-2f and the tris(pentafluoroethyl)difluorophosphorane (C2F5)3PF2 in the presence of alkynes or arenes led to fluoride transfer from Cu to the phosphorane with formation of the cationic transition metal complexes [(carbene)Cu(L)]+ and the weakly coordinating counteranion [(C2F5)3PF3]- (FAP). Using this method, the complexes [(IDipp)Cu(L)]+FAP- (IDipp = 1,3-bis(2,6-di-iso-propylphenyl)-imidazolin-2-ylidene; L = PhC≡CPh, 4d; PhC≡CMe, 5d), [(cAACMe)Cu(L)]+FAP- (cAACMe = 1-(2,6-di-iso-propylphenyl)-3,3,5,5-tetramethyl-pyrrolidin-2-ylidene; L = PhC≡CPh, 4f; PhC≡CMe, 5f), [(SIDipp)Cu(C6Me6)]+FAP- (6e), (SIDipp = 1,3-bis(2,6-di-iso-propylphenyl)-imidazolidine-2-ylidene), and [(cAACMe)Cu(C6Me6)]+FAP- (6f) have been synthesized and characterized. The complexes [(IDipp)Cu(C6Me6)]+FAP- (6d) and [(cAACMe)Cu(C6Me6)]+FAP- (6f) have been used as catalysts for the copper(I)-catalyzed cycloaddition of benzyl azide to terminal alkynes.

Transition Metal-Free Catalytic C-H Zincation and Alumination.

C-H metalation is the most efficient method to prepare aryl-zinc and -aluminium complexes that are ubiquitous nucleophiles. Virtually all C-H metalation routes to form Al/Zn organometallics require stoichiometric, strong Brønsted bases with no base-catalyzed reactions reported. Herein we present a catalytic in amine/ammonium salt (Et3N/[(Et3N)H]+) C-H metalation process to form aryl-zinc and aryl-aluminium complexes. Key to this approach is coupling an endergonic C-H metalation step with a sufficiently exergonic dehydrocoupling step between the ammonium salt by-product of C-H metalation ([(Et3N)H]+) and a Zn-H or Al-Me containing complex. This step, forming H2/MeH, makes the overall cycle exergonic while generating more of the reactive metal electrophile. Mechanistic studies supported by DFT calculations revealed metal-specific dehydrocoupling pathways, with the divergent reactivity due to the different metal valency (which impacts the accessibility of amine-free cationic metal complexes) and steric environment. Notably, dehydrocoupling in the zinc system proceeds through a ligand-mediated pathway involving protonation of the β-diketiminate Cγ position. Given this process is applicable to two disparate metals (Zn and Al), other main group metals and ligand sets are expected to be amenable to this transition metal-free, catalytic C-H metalation.

Development of a vortex-assisted switchable-hydrophilicity solvent-based liquid phase microextraction for fast and reliable extraction of Zn (II), Fe (II), Pb (II), and Cd (II) from various baby food products

This manuscript describes the development of a novel liquid phase microextraction (LPME) method for the extraction and determination of Zn (II), Fe (II), Pb (II), and Cd (II) in various infant/baby food and supplements products. The method is based on vortex-assisted extraction combined with a switchable-hydrophilicity solvent (SHS) sample preparation. The SHS, which undergoes reversible phase changes triggered by pH change, enables selective extraction and easy phase separation. A flame atomic absorption spectroscopy was used in the final determination step. Optimization studies revealed, that the optimal pH of the sample solution (after digestion) during analytes extraction is 5.5. A l-proline is added to the sample (375 mM) to ensure the complexation of the target metal cations. After the complexation step, 750 µL of SHS - a N, N-Dimethylcyclohexylamine along with 0.9 mL of 2 M of acetic acid solution is added (hydrophilicity switch-on stage) and mixed manually to obtain a homogeneous solution. In the last stage, 0.45 mL of 10 M NaOH solution (hydrophilicity switch-off stage) is added to the sample solution and a vortex for 100 s is applied to ensure the effective extraction and separation of the complex containing the analytes. At this stage, a cloudy solution is immediately obtained. Finally, the effective phase separation is obtained at the centrifugation step (4000 rpm for 2 mins). The method limit of detection was as 0.03, 0.009, 0.6, and 0.2 ng/L for Zn (II), Fe (II), Cd (II), and Pb (II) respectively with RSD% below 2.0 %. The analysis of certified reference materials and real samples proved the full applicability of the method for routine analysis, contributing to the field of heavy metal analysis and ensuring the safety of baby products. According to the AGREE methodology, this method can be named as green analytical chemistry method with a score of 0.77.

Analogous carbene-stabilised [MI-(η6-tol)]+ cations (M = Fe, Co, Ni): synthetic access and [carbene·MI]+ transfer.

A series of low-coordinate cationic 3d metal(I) complexes of the general formula [IPr·M(η6-tol)]+ is reported (M = Fe, Co, Ni; IPr = [(H)CN(Dip)C:]; Dip = 2,6-iPr2-C6H3), employing the weakly coordinating [BArF4]- counter-anion. The central metal in these complexes is stabilised solely by neutral carbene (i.e. IPr) and arene (i.e. toluene) ligands, making them rare examples of such cationic 3d metal(I) complexes, the electronic nature of which is explored by SQUID magnetometry. The utility of these species in [IPr·MI]+ transfer chemistry is demonstrated through the addition of a further equivalent of IPr, leading to formally two-coordinate cationic complexes, [(IPr2)·MI]+.

Two active species from a single metal halide precursor: a case study of highly productive Mn-catalyzed dehydrogenation of amine-boranes via intermolecular bimetallic cooperation.

Metal-metal cooperation for inert bond activation is a ubiquitous concept in coordination chemistry and catalysis. While the great majority of such transformations proceed via intramolecular mode in binuclear complexes, to date only a few examples of intermolecular small molecule activation using usually bimetallic frustrated Lewis pairs (Mδ+⋯M'δ-) have been reported. We introduce herein an alternative approach for the intermolecular bimetallic cooperativity observed in the catalytic dehydrogenation of amine-boranes, in which the concomitant activation of N-H and B-H bonds of the substrate via the synergetic action of Lewis acidic (M+) and basic hydride (M-H) metal species derived from the same mononuclear complex (M-Br). It was also demonstrated that this system generated in situ from the air-stable Mn(i) complex fac-[(CO)3(bis(NHC))MnBr] and NaBPh4 shows high activity for H2 production from several substrates (Me2NHBH3, tBuNH2BH3, MeNH2BH3, NH3BH3) at low catalyst loading (0.1% to 50 ppm), providing outstanding efficiency for Me2NHBH3 (TON up to 18 200) that is largely superior to all known 3d-, s-, p-, f-block metal derivatives and frustrated Lewis pairs (FLPs). These results represent a step forward towards more extensive use of intermolecular bimetallic cooperation concepts in modern homogeneous catalysis.

The role of surface chemistry in the synthesis of supported CuPd bimetallic/intermetallic catalysts for selective hydrogenation reactions

Understanding and controlling the structure of supported bimetallic/intermetallic catalysts are crucial for many heterogeneous catalytic reactions. However, commonly used synthesis techniques such as coimpregnation and coadsorption often yield nonuniform alloying and phase segregation, largely owing to the lack of interactions between different metal precursors. Here we show that by adopting sequential adsorption of complex metal cations and anions with the assistance of a proper ligand, the interaction between different metal precursors is enhanced, thus resulting in uniformly alloyed intermetallic catalysts. The supported CuPd intermetallic catalyst exhibits greatly improved selectivity towards monoolefins in the semihydrogenation of acetylene and butadiene compared to those random CuPd alloys synthesized via coimpregnation and coadsorption methods.

Binding Properties of Small Electrophilic Anions [B6 X5 ]- and [B10 X9 ]- (X=Cl, Br, I): Activation of Small Molecules Based on π-Backbonding.

Superelectrophilic anions constitute a special class of molecular anions that show strong binding of weak nucleophiles despite their negative charge. In this study, the binding characteristics of smaller gaseous electrophilic anions of the types [B6 X5 ]- and [B10 X9 ]- (with X=Cl, Br, I) were computationally and experimentally investigated and compared to those of the larger analogues [B12 X11 ]- . The positive charge of vacant boron increases from [B6 X5 ]- via [B10 X9 ]- to [B12 X11 ]- , as evidenced by increasing attachment enthalpies towards typical σ-donor molecules (noble gases, H2 O). However, this behavior is reversed for σ-donor-π-acceptor molecules. [B6 Cl5 ]- binds most strongly to N2 and CO, even more strongly than to H2 O. Energy decomposition analysis confirms that the orbital interaction is responsible for this opposite trend. The extended transition state natural orbitals for chemical valence method shows that the π-backdonation order is [B6 X5 ]- >[B10 X9 ]- >[B12 X11 ]- . This predicted order explains the experimentally observed red shifts of the CO and N2 stretching fundamentals compared to those of the unbound molecules, as measured by infrared photodissociation spectroscopy. The strongest red shift is observed for [B6 Cl5 N2 ]- : 222 cm-1 . Therefore, strong activation of unreactive σ-donor-π-acceptor molecules (commonly observed for cationic transition metal complexes) is achieved with metal-free molecular anions.

Possible Roles of Transition Metal Cations in the Formation of Interstellar Benzene via Catalytic Acetylene Cyclotrimerization.

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous interstellar molecules. However, the formation mechanisms of PAHs and even the simplest cyclic aromatic hydrocarbon, benzene, are not yet fully understood. Recently, we reported the statistical and dynamical properties in the reaction mechanism of Fe+-catalyzed acetylene cyclotrimerization, whereby three acetylene molecules are directly converted to benzene. In this study, we extended our previous work and explored the possible role of the complex of other 3d transition metal cations, TM+ (TM = Sc, Ti, Mn, Co, and Ni), as a catalyst in acetylene cyclotrimerization. Potential energy profiles for bare TM+-catalyst (TM = Sc and Ti), for TM+NC--catalyst (TM = Sc, Ti, Mn, Co, and Ni), and for TM+-(H2O)8-catalyst (TM = Sc and Ti) systems were obtained using quantum chemistry calculations, including the density functional theory levels. The calculation results show that the scandium and titanium cations act as efficient catalysts in acetylene cyclotrimerization and that reactants, which contain an isolated acetylene and (C2H2)2 bound to a bare (ligated) TM cation (TM = Sc and Ti), can be converted into a benzene-metal-cation product complex without an entrance barrier. We found that the number of electrons in the 3d orbitals of the transition metal cation significantly contributes to the catalytic efficiency in the acetylene cyclotrimerization process. On-the-fly Born-Oppenheimer molecular dynamics (BOMD) simulations of the Ti+-NC- and Ti+-(H2O)8 complexes were also performed to comprehensively understand the nuclear dynamics of the reactions. The computational results suggest that interstellar benzene can be produced via acetylene cyclotrimerization reactions catalyzed by transition metal cation complexes.

A Simple and Versatile Strategy for Oriented Immobilization of His-Tagged Proteins on Magnetic Nanoparticles.

Oriented and covalent immobilization of proteins on magnetic nanoparticles (MNPs) is particularly challenging as it requires both the functionality of the protein and the colloidal stability of the MNPs to be preserved. Here, we describe a simple, straightforward, and efficient strategy for MNP functionalization with proteins using metal affinity binding. Our method involves a single-step process where MNPs are functionalized using a preformed, ready-to-use nitrilotriacetic acid-divalent metal cation (NTA-M2+) complex and polyethylene glycol (PEG) molecules. As a proof-of-concept, we demonstrate the oriented immobilization of a recombinant cadherin fragment engineered with a hexahistidine tag (6His-tag) onto the MNPs. Our developed methodology is simple and direct, enabling the oriented bioconjugation of His-tagged cadherins to MNPs while preserving protein functionality and the colloidal stability of the MNPs, and could be extended to other proteins expressing a polyhistidine tag. When compared to the traditional method where NTA is first conjugated to the MNPs and afterward free metal ions are added to form the complex, this novel strategy results in a higher functionalization efficiency while avoiding MNP aggregation. Additionally, our method allows for covalent bonding of the cadherin fragments to the MNP surface while preserving functionality, making it highly versatile. Finally, our strategy not only ensures the correct orientation of the protein fragments on the MNPs but also allows for the precise control of their density. This feature enables the selective targeting of E-cadherin-expressing cells only when MNPs are decorated with a high density of cadherin fragments.

Complexing Properties of Synthesized 1,3,5-Triaza-7-Phosphaadamantane Derivatives Towards Some Lanthanides and Transition Metal Cations With Significant Antimicrobial and Antioxidant Activities.

The synthesis of new water-soluble N-alkylated derivatives of 1,3,5-triaza-7-phosphaadamantane is presented. Ru(PPh3)2Cl2 has been used to react with 1-(4-nitrobenzyl)-3,5-triaza-1-azonia-7-phosphaadamantane bromide (PTAR). By using elemental analysis, NMR, and IR spectroscopy, the obtained compounds were identified. The UV-visible absorption spectroscopy has been used to monitor the complexation of various transition metal cations. Studies on conductivity have been utilized to validate the complexes' stoichiometries. Using the disc diffusion method, five bacteria strains were used for the study of the antimicrobial activity of compounds 1-3. All tested pathogens, including M luteus LB 141107, were found to have strong biologic activity against the compounds tested in this study. Additionally, DPPH (2,2-diphenyl-1-picrylhydrazyl) has been tested for its ability to scavenge hydrogen peroxide and free radicals. According to our results, these compounds exhibit excellent radical scavenging properties.

Three Iodoargentate-Based Hybrids Decorated by Metal Complexes: Structures, Optical/Photoelectric Properties and Theoretical Studies.

So far, the development of new iodoargentate-based hybrids, especially those compounds with metal complex cations, and the understanding of their structure-activity relationships have been of vital importance but full of challenges. Herein, using the in-situ-generated metal complex cations as structural directing agents, three new iodoargentate-based hybrids, namely, [Co(phen)3]Ag2PbI6 (phen = 1,10-phenanthroline; 1), [Ni(5,5-dmpy)3]Ag7I9·CH3CN (5,5-dmpy = 5,5-dimethyl-2,2-bipyridine; 2) and [Co(5,5-dmpy)3]Ag5I8 (3), have been solvothermally prepared and then structurally characterized. Compound 1 represents one new heterometallic Ag-Pb-I compound characteristic of the chain-like [Ag2PbI6]n2n- anions. Compound 2 features the straight one-dimensional (1D) [Ag7I9]n2n- anionic moieties, while compound 3 contains infrequent two types of curved [Ag5I8]n3n- anions. Optical properties reveal that the title compounds exhibit interesting semiconductor behaviors with the band gaps of 1.59-2.78 eV, which endow them with good photoelectric switching performances under the alternate light irradiations. We also present their Hirshfeld surface analyses, and the theoretical studies (band structures, density of states (DOS) and partial density of states (PDOS)).

Chromogenic azomacrocycles with imidazole residue: Structure vs. properties

New diazo macrocycles linked by hydrocarbon chain bearing imidazole or 4-methylimidazole residue have been synthetized with satisfactory yield (24–55%). The structure of macrocycles was confirmed by X-ray analysis and spectroscopic methods (1H NMR, MS, FTIR). Metal cation complexation studies were carried out in acetonitrile and acetonitrile-water system. It was found that azomacrocyles form triple-decker complexes with lead(II). The highest values of stability constant were found for lead(II) complexes of 21-membered derivatives. For the first time azomacrocycles bearing imidazole residue were immobilized on a porous glass. Obtained materials can act as lead(II) or copper(II) colorimetric optical sensors with color digital analysis as detection using simple portable devices.