The present work aims to evaluate the applicability of mollusk (Meretrix lusoria) shells as a biosorbent for toxic metal ions (Cd2+ and Pb2+) following the batch mode biosorption procedure. Some well-known analytical methods have been used to characterize the biosorbent such as a scanning electron microscope (SEM), an energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction. The mechanism of metal ion biosorption was examined using various analytical techniques. Therefore, an evaluation of operating factors such as contact time, pH, initial concentration of metal ions, biosorbent dose, and temperature was performed. The results obtained in this investigation indicated that the optimum conditions for the biosorption of Cd+2 and Pb+2 ions are as follows: pH = 6; contact times of 90 min; and the 20 mg/L of initial [M2+]. And a biosorbent dosage of 1.0 g/100 mL for each metal ion solution was also determined. The maximum removal efficiency results were 90.6% for Cd+2 and 91.5% for Pb+2 at pH 6.0. The biosorption isotherm was investigated using three forms of linear equilibrium (Freundlich, Langmuir, and Temkin models). Kinetic studies were also conducted to determine the equilibrium time for the biosorption of the studied metals utilizing the pseudo-second-order, pseudo-first-order, and intraparticle diffusion model. The data indicate that the biosorption kinetics of Cd2+ and Pb2+ follow the pseudo-second-order models. According to the present study, it can be identified that the shell of Meretrix lusoria is a suitable biosorbent for Cd2+ and Pb2+ ions and can contribute to their removal from environmentally polluted water.
Read full abstract