Melt Breccia Research Articles

New insights into the size and timing of the Lawn Hill impact structure: relationship to the Century Zn – Pb deposit

The Lawn Hill circular structure in northwest Queensland contains unambiguous evidence of an extraterrestrial impact, including planar deformation features in quartz, impact diamonds, widespread shatter cone formation and impact melt breccia in the Mesoproterozoic basement. The question of its relevance to ore genesis is investigated because the world-class Century Zn – Pb deposit is situated at the conjunction of the 100+ km Termite Range Fault and the previously defined margin of the impact structure. The impact structure is considered to be a 19.5 km wide feature, this constrained in part by the outer margin of an annulus of brecciated and highly contorted limestone. New evidence is presented indicating impact into this Cambrian limestone, including: (i) ‘dykes’ of brecciated Cambrian limestone extending hundreds of metres into the Mesoproterozoic basement; (ii) highly contorted bedding in the limestone annulus compared with essentially undeformed limestone away from the impact site; as well as (iii) a 1 Mt megaclast of Mesoproterozoic Century-like ore suspended in the limestone. Through aerial photograph analysis, large-scale convoluted flow structures within the limestone are identified, and these are interpreted to indicate that parts of the Cambrian sequence may have been soft or only semi-consolidated at the time of impact. This highly contorted limestone bedding is suggested to represent slump-filling of an annular trough in response to impact-induced partial liquefaction of a sediment veneer. The age of impact is therefore considered to be concurrent with limestone formation during the Ordian to early Templetonian, at 520 – 510 Ma. Formation of the Century deposit is found to be unrelated to impact-generated hydrothermal activity, although some minor hydrothermal remobilisation of metals occurred. However, there was macro-scale remobilisation of gigantic ore fragments driven by impact-induced lateral and vertical injection of limestone into the Proterozoic sediments. The limestone-filled annular trough surrounds a 7.8 km diameter central uplift, consistent with formation of a complex crater morphology.

Osmium isotope and highly siderophile element systematics of lunar impact melt breccias: Implications for the late accretion history of the Moon and Earth

To characterize the compositions of materials accreted to the Earth–Moon system between about 4.5 and 3.8Ga, we have determined Os isotopic compositions and some highly siderophile element (HSE: Re, Os, Ir, Ru, Pt, and Pd) abundances in 48 subsamples of six lunar breccias. These are: Apollo 17 poikilitic melt breccias 72395 and 76215; Apollo 17 aphanitic melt breccias 73215 and 73255; Apollo 14 polymict breccia 14321; and lunar meteorite NWA482, a crystallized impact melt. Plots of Ir versus other HSE define excellent linear correlations, indicating that all data sets likely represent dominantly two-component mixtures of a low-HSE target, presumably endogenous component, and a high-HSE, presumably exogenous component. Linear regressions of these trends yield intercepts that are statistically indistinguishable from zero for all HSE, except for Ru and Pd in two samples. The slopes of the linear regressions are insensitive to target rock contributions of Ru and Pd of the magnitude observed; thus, the trendline slopes approximate the elemental ratios present in the impactor components contributed to these rocks. The 187Os/188Os and regression-derived elemental ratios for the Apollo 17 aphanitic melt breccias and the lunar meteorite indicate that the impactor components in these samples have close affinities to chondritic meteorites. The HSE in the Apollo 17 aphanitic melt breccias, however, might partially or entirely reflect the HSE characteristics of HSE-rich granulitic breccia clasts that were incorporated in the impact melt at the time of its creation. In this case, the HSE characteristics of these rocks may reflect those of an impactor that predated the impact event that led to the creation of the melt breccias. The impactor components in the Apollo 17 poikilitic melt breccias and in the Apollo 14 breccia have higher 187Os/188Os, Pt/Ir, and Ru/Ir and lower Os/Ir than most chondrites. These compositions suggest that the impactors they represent were chemically distinct from known chondrite types, and possibly represent a type of primitive material not currently delivered to Earth as meteorites.

Impacts, mega-tsunami, and other extraordinary claims

Impacts, mega-tsunami, and other extraordinary claims

Fold origin of the NE-lobe of the Sudbury Basin, Canada: Evidence from heterogeneous fabric development in the Onaping Formation and the Sudbury Igneous Complex

Structural analysis of the Onaping Formation, a heterolithic impact melt breccia, and the Granophyre in the NE-lobe of the 1.85 Ga Sudbury Igneous Complex (SIC) assist in understanding the formation of the Sudbury Basin. Previously, the lack of mesoscopic strain fabrics in the SIC, in contrast to pervasive fabrics in the Onaping Formation of the NE-lobe, led to interpretations of the shape of the NE-lobe as primary. We demonstrate that the structures of the Onaping Formation are consistent with deformation in a fold core controlled by the mechanically stronger Granophyre of the NE-lobe. Evidence for this interpretation includes the (1) presence of open structural domes and basins, (2) geometry of planar mineral shape fabrics, (3) variation in shape fabric intensity, and (4) kinematics of prominent faults. Folding of the Onaping Formation affected the SIC because fold geometry is based on dip data in the SIC and fold-related faults cut both the Onaping Formation and Granophyre. Microstructural observations point to different temperatures during deformation in both units that are consistent with initiation of folding during cooling of the SIC upon reaching middle greenschist-facies metamorphic conditions.

On the fate of carbonates and anhydrite in impact processes – evidence from the Chicxulub event

In context of the “K/T” Chicxulub cratering event, the amounts of impact-released CO2 and SOx as well as the consequences of this gaseous input into the atmosphere are discussed. It has been assumed that degassing of the sediments is an abrupt and violent effect, only related to the amplitude of the post-shock temperature after pressure decay. Here we provide evidence for a different, slow and probably equally important process of devolatilization: degassing and dissociation of sedimentary clasts in impact breccias. The sulfate and carbonate clasts in suevites, melt breccias, and melt rocks from the Chicxulub drill cores Y-6, C-1, and YAX-1, underwent various thermal effects, ranging from solid state re-crystallization over reaction with silicate melt to form pyroxene (diopside), melting (and re-crystallization) to total decomposition with dissolution of the lime in the melt matrix. These features reflect high, yet different formation temperatures of the breccias, and to a smaller degree, the fragment size.

An international and multidisciplinary drilling project into a young complex impact structure: The 2004 ICDP Bosumtwi Crater Drilling Project—An overview

Abstract— The Bosumtwi impact crater in Ghana, arguably the best‐preserved complex young impact structure known on Earth, displays a pronounced rim and is almost completely filled by Lake Bosumtwi, a hydrologically closed basin. It is the source crater of the Ivory Coast tektites. The structure was excavated in 2.1–2.2 Gyr old metasediments and metavolcanics of the Birimian Supergroup. A drilling project was conceived that would combine two major scientific interests in this crater: 1) to obtain a complete paleoenvironmental record from the time of crater formation about one million years ago, at a near‐equatorial location in Africa for which very few data are available so far, and 2) to obtain a complete record of impactites at the central uplift and in the crater moat, for ground truthing and comparison with other structures.Within the framework of an international and multidisciplinary drilling project led by the International Continental Scientific Drilling Program (ICDP), 16 drill cores were obtained from June to October 2004 at six locations within Lake Bosumtwi, which is 8.5 km in diameter. The 14 sediment cores are currently being investigated for paleoenvironmental indicators. The two impactite cores LB‐07A and LB‐08A were drilled into the deepest section of the annular moat (540 m) and the flank of the central uplift (450 m), respectively. They are the main subject of this special issue of Meteoritics & Planetary Science, which represents the first detailed presentations of results from the deep drilling into the Bosumtwi impactite sequence. Drilling progressed in both cases through the impact breccia layer into fractured bedrock. LB‐07A comprises lithic (in the uppermost part) and suevitic impact breccias with appreciable amounts of impact melt fragments. The lithic clast content is dominated by graywacke, besides various metapelites, quartzite, and a carbonate target component. Shock deformation in the form of quartz grains with planar microdeformations is abundant. First chemical results indicate a number of suevite samples that are strongly enriched in siderophile elements and Mg, but the presence of a definite meteoritic component in these samples cannot be confirmed due to high indigenous values. Core LB‐08A comprises suevitic breccia in the uppermost part, followed with depth by a thick sequence of graywacke‐dominated metasediment with suevite and a few granitoid dike intercalations. It is assumed that the metasediment package represents bedrock intersected in the flank of the central uplift. Both 7A and 8A suevite intersections differ from suevites outside of the northern crater rim.Deep drilling results confirmed the gross structure of the crater as imaged by the pre‐drilling seismic surveys. Borehole geophysical studies conducted in the two boreholes confirmed the low seismic velocities for the post‐impact sediments (less than 1800 m/s) and the impactites (2600–3300 m/s). The impactites exhibit very high porosities (up to 30 vol%), which has important implications for mechanical rock stability. The statistical analysis of the velocities and densities reveals a seismically transparent impactite sequence (free of prominent internal reflections). Petrophysical core analyses provide no support for the presence of a homogeneous magnetic unit (= melt breccia) within the center of the structure. Borehole vector magnetic data point to a patchy distribution of highly magnetic rocks within the impactite sequence.The lack of a coherent melt sheet, or indeed of any significant amounts of melt rock in the crater fill, is in contrast to expectations from modeling and pre‐drilling geophysics, and presents an interesting problem for comparative studies and requires re‐evaluation of existing data from other terrestrial impact craters, as well as modeling parameters.

Organic geochemistry of impactites from the Haughton impact structure, Devon Island, Nunavut, Canada

Organic matter in impactites from the 24 km wide and 39 Ma old Haughton impact structure, Canadian High Arctic, is a mixture of fossil and modern biological components. The fossil component represents a conventional oil that was generated from Lower Palaeozoic marine source material before impact and permeates bedrock dolomites. Biomarker maturity parameters record the thermal effect of the mid-Tertiary impact. Maturity-influenced sterane, rearranged hopanoid, and triaromatic steroid ratios all increase towards the centre of the impact structure, where thermal alteration was greatest. The heating was probably dominated by an impact-related hydrothermal system, as such systems last long enough for kinetically-based thermal alteration to occur. Kinetically-related biomarker data suggest that the hydrothermal heating lasted for c. 5000 years. Biomarkers are also preserved in dolomite clasts within impact melt breccia, and indicate strong thermal alteration. Modern biological contamination of the rocks is responsible for the superposition of two geochemical signatures (which could be cyanobacteria, non-marine algae, or higher plant matter) onto the fossil component, but they can be recognized and distinguished. The data show that the impact structure system holds a record of both the pre-impact organic signature and the thermal signature of the impact, and thereby indicates that organic geochemistry is a valuable tool in documenting the response of rocks to impacts.

Evidence for coeval Late Triassic terrestrial impacts from the Rochechouart (France) meteorite crater

High temperature impact melt breccias from the Rochechouart (France) meteorite crater record a magnetization component with antipodal, normal and reverse polarities. The corresponding paleomagnetic pole for this component lies between the 220 Ma and 210 Ma reference poles on the Eurasian apparent polar wander path, consistent with the 214 ± 8 Ma 40Ar/39Ar age of the crater. Late Triassic tectonic reconstructions of the Eurasian and North American plates place this pole within 95% confidence limits of the paleomagnetic pole from the Manicouagan (Canada) meteorite impact crater, which is dated at 214 ± 1 Ma. Together, these observations reinforce the hypothesis of a Late Triassic, multiple meteorite impact event on Earth.

Identifying impact events within the lunar cataclysm from 40Ar– 39Ar ages and compositions of Apollo 16 impact melt rocks

Lunar impact melt breccias provide a unique record of the timing and frequency of collisional events during the early history of the inner Solar System prior to the development of a significant rock record on Earth. The predominance of ages clustering between 3.8 and 4.0 Ga was a major, unexpected discovery obtained from geochronological studies of lunar impact melts, and is the basis of the concept that a cataclysmic bombardment of large planetesimals struck the Earth and Moon, and possibly the entire inner Solar System, about 3.85 ± 0.10 billion years ago. As a test of the cataclysm hypothesis, we measured high-resolution (20–50 steps) 40Ar– 39Ar age spectra on 25 samples of Apollo 16 impact melt breccias using a continuous laser heating system on sub-milligram fragments. Twenty-one of these 25 breccias produced multi-step plateaus that we interpret as crystallization ages, with 20 of these ages falling in the range 3.75–3.96 Ga. We propose that at least four different melt-producing impact events can be distinguished based on the ages, bulk compositions, and petrographic characteristics of Apollo 16 melt breccias. The recognition of multiple impact events within the Apollo 16 melt breccia suite shows that numerous impact events occurred on the lunar surface within a relatively narrow time interval, providing additional evidence of a heavy bombardment of the Moon during the early Archean.

Evolved mare basalt magmatism, high Mg/Fe feldspathic crust, chondritic impactors, and the petrogenesis of Antarctic lunar breccia meteorites Meteorite Hills 01210 and Pecora Escarpment 02007

Antarctic lunar meteorites Meteorite Hills 01210 and Pecora Escarpment 02007 are breccias that come from different regolith lithologies on the Moon. MET 01210 is composed predominantly of fractionated low-Ti basaltic material and is classified as an immature, predominantly basaltic glassy matrix regolith breccia. PCA 02007 is a predominantly feldspathic regolith breccia consisting of metamorphosed feldspathic, noritic, troctolitic and noritic-anorthosite clasts, agglutinate and impact-glasses, as well as a number of basaltic clasts with mare and possible non-mare affinities. The basalt clasts in MET 01210 have undergone ‘Fenner’ trend enrichments in iron and may also have witnessed late-stage crystallization of zircon or a zirconium-rich mineral. Some of the features of MET 01210 are similar to other basaltic lunar breccia meteorites (e.g., Northwest Africa 773; Elephant Moraine 87521/96008; Yamato 793274/981031), but it is not paired with them. The presence of metamorphic anorthositic clasts as well as agglutinates indicates a small regolith component. Similarities with previously discovered evolved (e.g., LaPaz Icefield 02205; Northwest Africa 032) and ferroan (e.g., Asuka 881757; Yamato 793169) basaltic lunar meteorites suggest a similar mare source region for MET 01210. Despite lack of evidence for pairing, PCA 02007 shares many features with other feldspathic regolith breccias (e.g., Yamato 791197, Queen Alexandra Range 94281), including a high Mg/Fe whole-rock composition, glass spherules, agglutinate fragments and a diverse clast inventory spanning the range of ferroan anorthosite and high magnesium suite rocks. Some of the basalt fragments in this sample are fractionated and have an igneous origin. However, the majority of the basalt fragments are impact melt clasts. PCA 02007 supports previous studies of feldspathic lunar meteorites that have suggested an aluminous crust for the Moon, with compositions more similar to magnesium granulite breccias than ferroan anorthosites. A ‘chondrule-like’ fragment found in PCA 02007 and unlike any previously described lunar material is described and tentatively identified as the remnants of a chondritic lunar impactor. This clast is porphyritic with equant olivines that have forsterite-rich cores (Fo >98), extreme normal zonation to more fayalitic rims (Fo >44), and a mineral assemblage with rare earth element abundances distinct from described lunar material and more similar to chondrules found in ordinary or carbonaceous chondrites. Its discovery and description is significant for understanding the composition of lunar impactors. Previously, the main evidence for chondritic lunar impactors was from chondritic relative abundances and near chondritic ratios of highly siderophile elements in lunar impact melt breccias. However, the presence of this clast, along with two other chondritic clasts from Apollo soils 12037 and 15602, provides clues to the identity of ancient meteorite impactors on the Moon.

Survival of reactive carbon through meteorite impact melting

Melt fragments in melt breccias from the Gardnos impact crater, Norway, contain abundant carbon. A high proportion of the carbon present in the original melt was preserved. The stripping of hydrogen from carbon during melting prevents later hydrocarbon formation, hence the carbon is fixed in place rather than volatilized. Underlying lithic breccias that were not melted record hydrocarbon generation as a response to less extreme heating. Despite the high-temperature history of the melt, the carbon from the Gardnos impact crater is highly disordered, rather than ordered crystalline graphite, and in this respect, it is comparable with carbon in chondrite chondrules. Disordered carbon bears functional groups upon weathering, and, therefore, carbon preserved through impact or other melting may be available for reworking into biologically relevant organic molecules.

A case study of impact-induced hydrothermal activity: The Haughton impact structure, Devon Island, Canadian High Arctic

Abstract— The well-preserved state and excellent exposure at the 39 Ma Haughton impact structure, 23 km in diameter, allows a clearer picture to be made of the nature and distribution of hydrothermal deposits within mid-size complex impact craters. A moderate- to low-temperature hydrothermal system was generated at Haughton by the interaction of groundwaters with the hot impact melt breccias that filled the interior of the crater. Four distinct settings and styles of hydrothermal mineralization are recognized at Haughton: a) vugs and veins within the impact melt breccias, with an increase in intensity of alteration towards the base; b) cementation of brecciated lithologies in the interior of the central uplift; c) intense veining around the heavily faulted and fractured outer margin of the central uplift; and d) hydrothermal pipe structures or gossans and mineralization along fault surfaces around the faulted crater rim. Each setting is associated with a different suite of hydrothermal minerals that were deposited at different stages in the development of the hydrothermal system. Minor, early quartz precipitation in the impact melt breccias was followed by the deposition of calcite and marcasite within cavities and fractures, plus minor celestite, barite, and fluorite. This occurred at temperatures of at least 200 °C and down to ˜100–120 °C. Hydrothermal circulation through the faulted crater rim with the deposition of calcite, quartz, marcasite, and pyrite, occurred at similar temperatures. Quartz mineralization within breccias of the interior of the central uplift occurred in two distinct episodes (˜250 down to ˜90 °C, and <60 °C). With continued cooling (<90 °C), calcite and quartz were precipitated in vugs and veins within the impact melt breccias. Calcite veining around the outer margin of the central uplift occurred at temperatures of ˜150 °C down to <60 °C. Mobilization of hydrocarbons from the country rocks occurred during formation of the higher temperature calcite veins (>80 °C). Appreciation of the structural features of impact craters has proven to be key to understanding the distribution of hydrothermal deposits at Haughton.

Geological overview and cratering model for the Haughton impact structure, Devon Island, Canadian High Arctic

Abstract— The Haughton impact structure has been the focus of systematic, multi-disciplinary field and laboratory research activities over the past several years. Regional geological mapping has refined the sedimentary target stratigraphy and constrained the thickness of the sedimentary sequence at the time of impact to ˜1880 m. New 40Ar–39Ar dates place the impact event at ˜39 Ma, in the late Eocene. Haughton has an apparent crater diameter of ˜23 km, with an estimated rim (final crater) diameter of ˜16 km. The structure lacks a central topographic peak or peak ring, which is unusual for craters of this size. Geological mapping and sampling reveals that a series of different impactites are present at Haughton. The volumetrically dominant crater-fill impact melt breccias contain a calcite-anhydrite-silicate glass groundmass, all of which have been shown to represent impact-generated melt phases. These impactites are, therefore, stratigraphically and genetically equivalent to coherent impact melt rocks present in craters developed in crystalline targets. The crater-fill impactites provided a heat source that drove a post-impact hydrothermal system. During this time, Haughton would have represented a transient, warm, wet microbial oasis. A subsequent episode of erosion, during which time substantial amounts of impactites were removed, was followed by the deposition of intra-crater lacustrine sediments of the Haughton Formation during the Miocene. Present-day intra-crater lakes and ponds preserve a detailed paleoenvironmental record dating back to the last glaciation in the High Arctic. Modern modification of the landscape is dominated by seasonal regional glacial and niveal melting, and local periglacial processes. The impact processing of target materials improved the opportunities for colonization and has provided several present-day habitats suitable for microbial life that otherwise do not exist in the surrounding terrain.

Impactites of the Haughton impact structure, Devon Island, Canadian High Arctic

Contrary to the previous interpretation of a single allochthonous impactite lithology, combined field, optical, and analytical scanning electron microscopy (SEM) studies have revealed the presence of a series of impactites at the Haughton impact structure. In the crater interior, there is a consistent upward sequence from parautochthonous target rocks overlain by parautochthonous lithic (monomict) breccias, through allochthonous lithic (polymict) breccia, into pale grey allochthonous impact melt breccias. The groundmass of the pale grey impact melt breccias consists of microcrystalline calcite, silicate impact melt glass, and anhydrite. Analytical data and microtextures indicate that these phases represent a series of impact-generated melts that were molten at the time of, and following, deposition. Impact melt glass clasts are present in approximately half of the samples studied. Consideration of the groundmass phases and impact glass clasts reveal that impactites of the crater interior contain shock-melted sedimentary material from depths of >920 to 200 to <760 m and are interpreted as remnants of the continuous ejecta blanket. The pale grey impact melt breccias, although similar to the impact melt breccias of the crater interior, are more carbonate-rich and do not appear to have incorporated clasts from the crystalline basement. Thus, the spatial distribution of the crater-fill impactites at Haughton, the stratigraphic succession from target rocks to allochthonous impactites, the recognition of large volumes of impact melt breccias, and their probable original volume are all analogous to characteristics of coherent impact melt layers in comparatively sized structures formed in crystalline targets.

Intra-crater sedimentary deposits at the Haughton impact structure, Devon Island, Canadian High Arctic

Detailed field mapping has revealed the presence of a series of intra-crater sedimentary deposits within the interior of the Haughton impact structure, Devon Island, Canadian High Arctic. Coarse-grained, well-sorted, pale gray lithic sandstones (reworked impact melt breccias) unconformably overlie pristine impact melt breccias and attest to an episode of erosion, during which time significant quantities of impact melt breccias were removed. The reworked impact melt breccias are, in turn, unconformably overlain by paleolacustrine sediments of the Miocene Haughton Formation. Sediments of the Haughton Formation were clearly derived from pre-impact lower Paleozoic target rocks of the Allen Bay Formation, which form the crater rim in the northern, western, and southern regions of the Haughton structure. Collectively, these field relationships indicate that the Haughton Formation was deposited up to several million years after the formation of the Haughton crater and that they do not, therefore, represent an immediate, post-impact crater lake deposit. This is consistent with new isotopic dating of impactites from Haughton that indicate an Eocene age for the impact event (Sherlock et al. 2005). In addition, isolated deposits of post-Miocene intra-crater glacigenic and fluvioglacial sediments were found lying unconformably over remnants of the Haughton Formation, impact melt breccias, and other pre-impact target rock formations. These deposits provide clear evidence for glaciation at the Haughton crater. The wealth and complexity of geological and climatological information preserved as intra-crater deposits at Haughton suggests that craters on Mars with intra-crater sedimentary records might present us with similar opportunities, but also possibly significant challenges.

Chemical compositions of impact melt breccias and target rocks from the Tenoumer impact crater, Mauritania

The impact melt breccias from the Tenoumer crater (consisting of a fine-grained intergrowth of plagioclase laths, pyroxene crystals, oxides, and glass) display a wide range of porosity and contain a large amount of target rock clasts. Analyses of major elements in impact melt rocks show lower contents of SiO2, Al2O3, and Na2O, and higher contents of MgO, Fe2O3, and CaO, than the felsic rocks (i.e., granites and gneisses) of the basement. In comparison with the bulk analyses of the impact melt, the glass is strongly enriched in Si-Al, whereas it is depleted both in Mg and Fe; moreover, the impact melt rocks are variably enriched or depleted in some REE with respect to the felsic and mafic bedrock types. Gold is slightly enriched in the impact melt, and Co, Cr, and Ni abundances are possibly due to a contribution from mafic bedrock. Evidences of silicate-carbonate liquid immiscibility, mainly as spherules and globules of calcite within the silicate glass, have been highlighted. HMX mixing calculation confirm that the impact melt rocks are derived from a mixing of at least six different target lithologies outcropping in the area of the crater. A large contribution is derived from granitoids (50%) and mica schist (17-19%), although amphibolites (∼15%), cherty limestones (∼10%), and ultrabasites (∼6%) components are also present. The very low abundances of PGE in the melt rock seem to come mainly from some ultrabasic target rocks; therefore, the contamination from the meteoritic projectile appears to have been negligible.

The melt rocks of the Vredefort impact structure – Vredefort Granophyre and pseudotachylitic breccias: Implications for impact cratering and the evolution of the Witwatersrand Basin

The unique combination of its large size (250–300 km diameter), deep levels of erosion (>7 km), and widespread regional mining activity make the Vredefort impact structure in South Africa an exceptional laboratory for the study of impact-related deformation phenomena in the rocks beneath giant, complex impact craters. Two types of impact-generated melt rock occur in the Vredefort Structure: the Vredefort Granophyre – impact melt rock – and pseudotachylitic breccias. Along the margins of the structure, mining and exploration drilling in the Witwatersrand goldfields has revealed widespread fault-related pseudotachylitic breccias linked to the impact event. There, volumetrically limited melt breccia occurs in close association with cataclasite or mylonitic zones associated with bedding-parallel normal dip-slip faults that formed during inward slumping of the crater walls, and in rare subvertical faults oriented radially to the center of the structure. This association is consistent with formation of pseudotachylites by frictional melting. On the other hand, rocks in the Vredefort Dome – the central uplift of the impact structure – contain ubiquitous melt breccias that range in size from sub-millimeter pods and veinlets to dikes up to tens of meters wide and hundreds of meters long. Like fault-related pseudotachylites in the goldfields and elsewhere in the world, they display a close geochemical relationship to their wallrocks, indicating local derivation. However, although mm/cm- to, rarely, dm-scale offsets are commonly found along their margins, they do not appear to be associated with broader fault zones, are commonly considerably more voluminous than most known fault-related pseudotachylites, and show no consistent relationship between melt volumes and slip magnitude. Recent petrographic observations indicate that at least some of these melt breccias formed by shock melting, with or without frictional melting. Consequently, the non-genetic term “pseudotachylitic breccia” has been adopted for these Vredefort occurrences. These breccias formed during the impact in rocks at temperatures ranging from greenschist to granulite facies, and were subsequently annealed to varying degrees during cooling of the central uplift. In addition to the pseudotachylitic breccias, nine clast-laden impact melt dikes (Vredefort Granophyre), each up to several kilometers long, occur in vertical radial and tangential fractures in the Vredefort Dome. Unlike the pseudotachylitic breccias, they display a remarkably uniform bulk composition and clast populations that are largerly independent of their wallrocks, and they contain geochemical traces of the impactor. They represent intrusive offshoots of the homogenized impact melt body that originally lay within the crater. U–Pb single zircon and Ar–Ar dating indicates that the Vredefort Granophyre and pseudotachylitic breccias, and the Witwatersrand pseudotachylites all formed at 2020±5 Ma – the age of the impact event, making the breccias a convenient time marker in the evolution of the structurally complex Witwatersrand basin with its unique gold deposits.

Geochemical and petrographic characteristics of impactites and Cretaceous target rocks from the Yaxcopoil‐1 borehole, Chicxulub impact structure, Mexico: Implications for target composition

Abstract— We present major and trace element data as well as petrographic observations for impactites (suevitic groundmass, bulk suevite, and melt rock particles) and target lithologies, including Cretaceous anhydrite, dolomite, argillaceous limestone, and oil shale, from the Yaxcopoil‐1 borehole, Chixculub impact structure. The suevitic groundmass and bulk suevite have similar compositions, largely representing mixtures of carbonate and silicate components. The latter are dominated by melt rock particles. Trace element data indicate that dolomitic rocks represented a significant target component that became incorporated into the suevites; in contrast, major elements indicate a strong calcitic component in the impactites. The siliceous end‐member requires a mafic component in order to explain the low SiO2 content. Multicomponent mixing of various target rocks, the high alteration state, and dilution by carbonate complicate the determination of primary melt particle compositions. However, two overlapping compositional groups can be discerned—a high‐Ba, low‐Ta group and a high‐Fe, high‐Zn, and high‐Hf group. Cretaceous dolomitic rocks, argillaceous limestone, and shale are typically enriched in U, As, Br, and Sb, whereas anhydrite contains high Sr contents. The oil shale samples have abundances that are similar to the North American Shale Composite (NASC), but with a comparatively high U content. Clastic sedimentary rocks are characterized by relatively high Th, Hf, Zr, As, and Sb abundances. Petrographic observations indicate that the Cretaceous rocks in the Yaxcopoil‐1 drill core likely register a multistage deformation history that spans the period from pre‐ to post‐impact. Contrary to previous studies that claimed evidence for the presence of impact melt breccia injection veins, we have found no evidence in our samples from a depth of 1347–1348 m for the presence of melt breccia. We favor that clastic veinlets occur in a sheared and altered zone that underwent intense diagenetic overprint prior to the impact event.

Structural analysis of the collar of the Vredefort Dome, South Africa—Significance for impact‐related deformation and central uplift formation

Abstract— Landsat TM, aerial photograph image analysis, and field mapping of Witwatersrand supergroup meta‐sedimentary strata in the collar of the Vredefort Dome reveals a highly heterogeneous internal structure involving folds, faults, fractures, and melt breccias that are interpreted as the product of shock deformation and central uplift formation during the 2.02 Ga Vredefort impact event. Broadly radially oriented symmetric and asymmetric folds with wavelengths ranging from tens of meters to kilometers and conjugate radial to oblique faults with strike‐slip displacements of, typically, tens to hundreds of meters accommodated tangential shortening of the collar of the dome that decreased from ˜17% at a radius from the dome center of 21 km to &lt;5% at a radius of 29 km. Ubiquitous shear fractures containing pseudotachylitic breccia, particularly in the metapelitic units, display local slip senses consistent with either tangential shortening or tangential extension; however, it is uncertain whether they formed at the same time as the larger faults or earlier, during the shock pulse. In addition to shatter cones, quartzite units show two fracture types—a cmspaced rhomboidal to orthogonal type that may be the product of shock‐induced deformation and later joints accomplishing tangential and radial extension. The occurrence of pseudotachylitic breccia within some of these later joints, and the presence of radial and tangential dikes of impact melt rock, confirm the impact timing of these features and are suggestive of late‐stage collapse of the central uplift.

Laser argon dating of melt breccias from the Siljan impact structure, Sweden: Implications for a possible relationship to Late Devonian extinction events

Abstract— In earlier studies, the 65-75 km diameter Siljan impact structure in Sweden has been linked to the Late Devonian mass extinction event. The Siljan impact event has previously been dated by K-Ar and Ar-Ar chronology at 342-368 Ma, with the commonly quoted age being 362.7 ± 2.2 Ma (2 s̀, recalculated using currently accepted decay constants). Until recently, the accepted age for the Frasnian/Famennian boundary and associated extinction event was 364 Ma, which is within error limits of this earlier Siljan age. Here we report new Ar-Ar ages extracted by laser spot and laser step heating techniques for several melt breccia samples from Siljan (interpreted to be impact melt breccia). The analytical results show some scatter, which is greater in samples with more extensive alteration; these samples generally yield younger ages. The two samples with the least alteration yield the most reproducible weighted mean ages: one yielded a laser spot age of 377.2 ± 2.5 Ma (95% confidence limits) and the other yielded both a laser spot age of 376.1 ± 2.8 Ma (95% confidence limits) and a laser stepped heating plateau age over 70.6% 39Ar release of 377.5 ± 2.4 Ma (2 s̀). Our conservative estimate for the age of Siljan is 377 ± 2 Ma (95% confidence limits), which is significantly different from both the previously accepted age for the Frasnian/Famennian (F/F) boundary and the previously quoted age of Siljan. However, the age of the F/F boundary has recently been revised to 374.5 ± 2.6 Ma by the International Commission for Stratigraphy, which is, within error, the same as our new age. However, the currently available age data are not proof that there was a connection between the Siljan impact event and the F/F boundary extinction. This new result highlights the dual problems of dating meteorite impacts where fine-grained melt rocks are often all that can be isotopically dated, and constraining the absolute age of biostratigraphic boundaries, which can only be constrained by age extrapolation. Further work is required to develop and improve the terrestrial impact age record and test whether or not the terrestrial impact flux increased significantly at certain times, perhaps resulting in major extinction events in Earth's biostratigraphic record.