Mechanosensitive Channel Protein Research Articles

Two families of mechanosensitive channel proteins.

Mechanosensitive (MS) channels that provide protection against hypoosmotic shock are found in the membranes of organisms from the three domains of life: bacteria, archaea, and eucarya. Two families of ubiquitous MS channels are recognized, and these have been designated the MscL and MscS families. A high-resolution X-ray crystallographic structure is available for a member of the MscL family, and extensive molecular genetic, biophysical, and biochemical studies conducted in many laboratories have allowed postulation of a gating mechanism allowing the interconversion of a tightly closed state and an open state that controls transmembrane ion and metabolite fluxes. In contrast to the MscL channel proteins, which are of uniform topology, the much larger MscS family includes protein members with topologies that are predicted to vary from 3 to 11 alpha-helical transmembrane segments (TMSs) per polypeptide chain. Sequence analyses reveal that the three C-terminal TMSs of MscS channel proteins are conserved among family members and that the third of these three TMSs exhibits a 20-residue motif that is shared by the channel-forming TMS (TMS 1) of the MscL proteins. We propose that this C-terminal TMS in MscS family homologues serves as the channel-forming helix in a homooligomeric structure. The presence of a conserved residue pattern for the putative channel-forming TMSs in the MscL and MscS family proteins suggests a common structural organization, gating mechanism, and evolutionary origin.

Domain organization of the MscS mechanosensitive channel of Escherichia coli.

The major structural features of the Escherichia coli MscS mechanosensitive channel protein have been explored using alkaline phosphatase (PhoA) fusions, precise deletions and site-directed mutations. PhoA protein fusion data, combined with the positive-inside rule, strongly support a model in which MscS crosses the membrane three times, adopting an N(out)-C(in) configuration. Deletion data suggest that the C-terminal domain of the protein is essential for the stability of the MscS channel, whereas the protein will tolerate small deletions at the N-terminus. Four mutants that exhibit either gain-of-function (GOF) or loss-of-function have been identified: a double mutation I48D/S49P inactivates MscS, whereas the MscS mutants T93R, A102P and L109S cause a strong GOF phenotype. The similarity of MscS to the last two domains of MscK (formerly KefA) is reinforced by the demonstration that expression of a truncated MscK protein can substitute for MscL and MscS in downshock survival assays. The data derived from studies of the organization, conservation and the influence of mutations provide significant insights into the structure of the MscS channel.

Pulled Sideways

Bacteria lack rigid cell walls and must respond rapidly to salt-induced gradients in osmotic pressure. In Escherichia coli, the mechanosensitive channel proteins MscL and MscS open in response to pressure applied perpendicularly to the membrane, which has the effect of pulling laterally on the membrane-embedded proteins. Bass et al. (see the Perspective by Bezanilla and Perozo) provide the crystal structure of MscS and describe how the transmembrane helices might reorient themselves as a result of being pulled sideways. The authors also propose how changes in transmembrane electrical potential might trigger movement of positively charged arginines and voltage-gate the osmolyte flux.R. B. Bass, P. Strop, M. Barclay, D. C. Rees, Crystal structure of Escherichia coli MscS, a voltage-modulated and mechanosensitive channel. Science 298, 1582-1587 (2002). [Abstract] [Full Text]F. Bezanilla, E. Perozo, Force and voltage sensors in one structure. Science 298, 1562-1563 (2002). [Summary] [Full Text]

Pulled Sideways

Bacteria lack rigid cell walls and must respond rapidly to salt-induced gradients in osmotic pressure. In Escherichia coli , the mechanosensitive channel proteins MscL and MscS open in response to pressure applied perpendicularly to the membrane, which has the effect of pulling laterally on the membrane-embedded proteins. Bass et al. (see the Perspective by Bezanilla and Perozo) provide the crystal structure of MscS and describe how the transmembrane helices might reorient themselves as a result of being pulled sideways. The authors also propose how changes in transmembrane electrical potential might trigger movement of positively charged arginines and voltage-gate the osmolyte flux. R. B. Bass, P. Strop, M. Barclay, D. C. Rees, Crystal structure of Escherichia coli MscS, a voltage-modulated and mechanosensitive channel. Science 298 , 1582-1587 (2002). [Abstract] [Full Text] F. Bezanilla, E. Perozo, Force and voltage sensors in one structure. Science 298 , 1562-1563 (2002). [Summary] [Full Text]

A large iris-like expansion of a mechanosensitive channel protein induced by membrane tension.

MscL, a bacterial mechanosensitive channel of large conductance, is the first structurally characterized mechanosensor protein. Molecular models of its gating mechanisms are tested here. Disulfide crosslinking shows that M1 transmembrane alpha-helices in MscL of resting Escherichia coli are arranged similarly to those in the crystal structure of MscL from Mycobacterium tuberculosis. An expanded conformation was trapped in osmotically shocked cells by the specific bridging between Cys 20 and Cys 36 of adjacent M1 helices. These bridges stabilized the open channel. Disulfide bonds engineered between the M1 and M2 helices of adjacent subunits (Cys 32-Cys 81) do not prevent channel gating. These findings support gating models in which interactions between M1 and M2 of adjacent subunits remain unaltered while their tilts simultaneously increase. The MscL barrel, therefore, undergoes a large concerted iris-like expansion and flattening when perturbed by membrane tension.

How do membrane proteins sense water stress?

Maintenance of cell turgor is a prerequisite for almost any form of life as it provides a mechanical force for the expansion of the cell envelope. As changes in extracellular osmolality will have similar physicochemical effects on cells from all biological kingdoms, the responses to osmotic stress may be alike in all organisms. The primary response of bacteria to osmotic upshifts involves the activation of transporters, to effect the rapid accumulation of osmoprotectants, and sensor kinases, to increase the transport and/or biosynthetic capacity for these solutes. Upon osmotic downshift, the excess of cytoplasmic solutes is released via mechanosensitive channel proteins. A number of breakthroughs in the last one or two years have led to tremendous advances in our understanding of the molecular mechanisms of osmosensing in bacteria. The possible mechanisms of osmosensing, and the actual evidence for a particular mechanism, are presented for well studied, osmoregulated transport systems, sensor kinases and mechanosensitive channel proteins. The emerging picture is that intracellular ionic solutes (or ionic strength) serve as a signal for the activation of the upshift-activated transporters and sensor kinases. For at least one system, there is strong evidence that the signal is transduced to the protein complex via alterations in the protein-lipid interactions rather than direct sensing of ion concentration or ionic strength by the proteins. The osmotic downshift-activated mechanosensitive channels, on the other hand, sense tension in the membrane but other factors such as hydration state of the protein may affect the equilibrium between open and closed states of the proteins.

Genetic analysis of the ycgJ-metB-cysK-ygaG operon negatively regulated by the VirR/VirS system in Clostridium perfringens.

The 5'-flanking region of the metB-cysK-ygaG operon, whose expression is negatively regulated by the VirR/VirS system in C. perfringens, was analyzed. The region contained the ycgJ, mscL, and colA genes encoding a hypothetical protein, a large conductance mechanosensitive channel protein, and kappa-toxin (collagenase), respectively. Northern analysis revealed that the ycgJ gene was transcribed as a 4.9-kb operon together with the metB-cysK-ygaG genes and that this operon was negatively regulated by the VirR/VirS system. It is indicated that the pfoA (theta-toxin or perfringolysin O), colA, and ycgJ-metB-cysK-ygaG genes that belong to the VirR/VirS regulon are situated very close together in a 26.5-kb region of the chromosome, but do not form a pathogenic island.

Membrane topology and multimeric structure of a mechanosensitive channel protein of Escherichia coli.

We have studied the membrane topology and multimeric structure of a mechanosensitive channel, MscL, which we previously isolated and cloned from Escherichia coli. We have localized this 15-kDa protein to the inner membrane and, by PhoA fusion, have shown that it contains two transmembrane domains with both the amino and carboxyl termini on the cytoplasmic side. Mutation of the glutamate at position 56 to histidine led to changes in channel kinetics which were dependent upon the pH on the periplasmic, but not cytoplasmic side of the membrane, providing additional evidence for the periplasmic positioning of this part of the molecule. Tandems of two MscL subunits expressed as a single polypeptide formed functional channels, suggesting an even number of transmembrane domains per subunit (amino and carboxyl termini on the same side of the membrane), and an even number of subunits per functional complex. Finally, cross-linking studies suggest that the functional MscL complex is a homohexamer. In summary, these data are all consistent with a protein domain assignment and topological model which we propose and discuss.

Structure-activity relations of amiloride and its analogues in blocking the mechanosensitive channel in Xenopus oocytes.

1. Patch clamp recording techniques have been used to compare the block caused by amiloride and some of its structural analogues of the mechanosensitive (MS) cation selective channel in frog (Xenopus laevis) oocytes. 2. Like amiloride, the amiloride analogues dimethylamiloride (DMA), benzamil and bromohexamethyleneamiloride (BrHMA) block the MS channel in a highly voltage-dependent manner. 3. All analogues tested were more potent blockers than amiloride with IC50's of 500 microM (amiloride), 370 microM (DMA), 95 microM (benzamil) and 34 microM (BrHMA). 4. Hill plots gave Hill coefficients of 2 (amiloride), 1.8 (DMA), 1 (benzamil) and 1.2 (BrHMA) indicating that the binding of two ligand molecules may be necessary for the block caused by amiloride, DMA and possibly BrHMA whereas only a single ligand molecule may be required for the block by benzamil. 5. The potential use of BrHMA as a light-activated, covalent label of the MS channel protein is discussed. 6. The amiloride analogue 'fingerprinting' of the blocking site on the MS channel indicates it is structurally different from previously described amiloride-sensitive ion transport pathways but may be related to the amiloride binding site on outer hair cells of the ear.

The Increasing Problem of Photosensitivity

Accumulating evidence has revealed the mechanosensitive ion channel protein Piezo1 is contributing to tumorigenesis. However, its role in hepatocellular carcinoma (HCC) remains unexplored. In this study, we demonstrated that Piezo1 was expressed in the HepG2 cell line and depletion of Piezo1 impaired proliferation and migration, as well as increased apoptosis in these cells. Using a Piezo1-specific activator, Yoda1, we identified that calcium entry induced by Yoda1 resulted in phosphorylation of JNK, p38, and ERK, thereby activating the mitogen-activated protein kinase (MAPK) pathway, in a dose- and time-dependent manner. More strikingly, Piezo1 activation integrated with YAP signaling to control the nuclear translocation of YAP and regulation of its target genes. JNK, p38, and ERK (MAPK signaling) regulated Yoda1-induced YAP activation. Consistent with the association of calpain with Piezo1, we also found that calpain activity was decreased by siRNA-mediated knockdown of Piezo1. In addition, the growth of HCC tumors was inhibited in Piezo1 haploinsufficient mice. Together, our findings establish that the Piezo1/MAPK/YAP signaling cascade is essential for HepG2 cell function. These results highlight the importance of Piezo1 in HCC and the potential utility of Piezo1 as a biomarker and therapeutic target.