Deformation Mechanisms Research Articles

Local structural behaviour of the outer containment of an NPP against hard missile impact

An aircraft crash and missile impact on a nuclear containment structure is currently described as an event beyond design basis; however, soon, it will be qualified as a primary design criterion. In the present study, the structural and dynamic behaviour of the outer containment of a nuclear power plant (NPP) has been studied to substantiate its structural integrity against the rigid missile impact. Scaled experiments (at a 1:4 and 1:3 ratio with respect to shell thickness) have been performed to study the localized behaviour of the containment structure against 10 and 20-kg rigid steel projectiles. The reinforced cement concrete (RCC) targets of thicknesses 150 and 200 mm have been subjected to impact at incidence velocity close to the landing and taking of velocity of the aircraft. The flexural reinforcement ratio was considered 1.25 % for a 150 mm thick target and 1.53 % for a 200 mm thick target. The effect of shear reinforcement on the penetration and perforation resistance has been studied for a 200 mm thick RCC target. A detailed post-test examination was conducted to evaluate the localized physical damage characteristics such as spalling and scabbing of concrete, penetration, perforation, crack propagation, and the damage induced in both flexural and shear reinforcements. The mechanics of deformation and failure modes of the target were investigated under varying incidence velocities, 60–115 m/s. The reinforcement characteristics under dynamic loading, such as strain time histories, strain rate sensitivity, and dynamic material properties, were also investigated. The presence of transverse reinforcement in 200 mm thick targets improved the ballistic performance by 12.50 %. Furthermore, the transverse reinforcement also played a crucial role in restricting the bending of the rear face flexural reinforcement and controlling the rear face damage propagation.

Effect of ultrasonic micro-forging on the microstructure and properties of GH4169 superalloy deposited by laser direct energy deposition

Nickel-based superalloys prepared by laser direct energy deposition (DED) still suffer from microstructure, elemental segregation, and unstable strength, which cannot meet the service requirements and severely limit the application and development of DED-prepared superalloy parts. In this paper, GH4169 specimens with high density and free of defects were prepared by ultrasonic micro-forging assisted laser direct energy deposition (UMT-DED) method. The effects of UMT on the dendritic structure, elemental segregation, and precipitation phases of the alloys prepared by UMT-DED, as well as the densities, hardness, and tensile properties at room and high temperatures were investigated. The contribution of the strengthening mechanism to the yield strength was estimated. The grain refinement mechanism and the deformation mechanism of the Laves phase in GH4169 were discussed. The results show that UMT achieves grain refinement by forming fine crystal strips between the layers. The proportion of fine grain areas increased from 5.9 % to 33.3 %. The plastic deformation introduced by UMT provides external work for dislocation movement to break and fracture part of the Laves phase during plastic deformation, with dislocation cutting of the Laves phase being the main deformation mechanism. The residual stresses was transformed into residual compressive stress. The tensile strength, yield strength, and elongation of the specimens at 25 °C were increased by 4.23 %, 6.42 %, and 23.67 % respectively.

Near-full density enabled excellent dynamic mechanical behavior in additively manufactured 316L stainless steels

Mechanical properties of additively manufactured alloys are momentously affected by the fabrication defects, thus limiting their applications in extreme conditions. Here we report on a near fully dense 316L stainless steel via optimized laser processing parameters. The results reveal that the dynamic mechanical response exhibits much greater sensitivity to defects than the quasi-static one. The densest specimen (porosity < 0.01 %, 260W-316L) exhibits superior spall strength of 3.87 GPa and negligible damage fraction of 0.03 % at peak stress of 4.8 GPa, which are 12 % higher and 92 % smaller than those of 0.18 % porosity specimen (300W-316L). For both horizontal and vertical impacts, hardly any anisotropy of spall strength is observed in 260W-316L, demonstrating the crucial role of the pore defects on the dynamical behavior. Moreover, dislocation slip dominated spallation mechanisms have been observed in the additively manufactured 316L specimens, accompanied by a small amount of deformation twinning and martensitic transitions. This comprehensive understanding of the defect-dependent spallation behavior and deformation mechanisms provides valuable insights for optimizing the dynamic mechanical properties of additively manufactured metals and alloys.

Monitoring and Law Analysis of Secondary Deformation on the Surface of Multi-Coal Seam Mining in Closed Mines

A large number of mines have been closed due to resource depletion, failure to meet safety production requirements, and other reasons. To effectively ensure the safety of the ecological environment above these closed mines along with the safety of engineering construction, it is necessary to monitor the secondary deformation of closed mines. Based on TerraSAR-X, Sentinel-1A data, and InSAR technology, this study obtained high-density secondary surface deformation data on the Jiahe Coal Mine and Pangzhuang Coal Mine in the western Xuzhou area. Combining mining geological data, we analyzed the spatiotemporal variation patterns and mechanisms of secondary deformation in multi-seam mining of closed mines. It was found that when mining multiple seams involves large interlayer spacing, the secondary deformation pattern shows a “W” shape. In this situation, the deformation can be divided into five stages: subsidence, uplift, re-subsidence, re-uplift, and relative stability. This study provides technical support for the evaluation and prevention of secondary deformation hazards in closed mines.

Effects of multilayer MoS2 coating on the mechanical properties of metals: A competition between external force and interfacial adhesion

Molybdenum disulfide (MoS2) is a two-dimensional material that exhibits unique interfacial interactions with metals, making it potential coating material for improving material properties of metals. In this work, the effects of multilayer MoS2 coating on the mechanical properties and deformation behaviours of copper (Cu) and gold (Au) substrates are investigated by nanoindentation experiments and molecular dynamics (MD) simulations. Specifically, our experimental results indicate that the MoS2 coating greatly increases the Young's modulus and hardness of Au substrate throughout the indentation process. In the MoS2/Cu system, however, the MoS2 coating exhibits inverse effects at diffident indentation depths, which, specifically, has the weakening and enhancing effects at the early and late stages of the indentation process, respectively. MD simulations indicate that the different effects of the MoS2 coating on the mechanical properties of Au and Cu substrates are attributed to the different interfacial adhesion properties between the MoS2/Cu and MoS2/Au systems, as the binding energy of the MoS2/Au system is much larger than that of its MoS2/Cu counterpart. Moreover, it is also revealed in MD simulations that the load-bearing area of metal substrates can be significantly enlarged by the MoS2 coating, which leads to the dense dislocations distributed in metal substrates and thus the strain-hardening in MoS2/metal composites.

Analysis of extrusion characterization of Nd-Fe-B permanent magnet ring based on Normalized Cockcroft & Latham fracture criterion

The hot deformation behavior of hot-pressed Nd-Fe-B material was investigated using a Gleeble-3500 thermal simulation machine, with deformation of 50 %, temperatures ranging from 700 to 850 °C, and strain rates ranging from 0.01 to 1 s−1. A hyperbolic sine model was employed to establish a constitutive equation suitable for this material. In addition, the chosen fracture criterion and damage threshold in the simulations were validated against the experimental results. Then, a three-dimensional thermo-mechanical coupled model was developed to simulate the damage evolution of the material during the extrusion process. The effects of different extrusion processes and positions of the back pressure tool on the magnetic performance and forming quality of the material were investigated. The simulation results indicate that both the combined extrusion process and the back pressure tool located at the half of the workpiece will contribute to improve the uniformity of the magnetic properties, and effectively ensuring the regularity of the forming process at the top of the magnetic ring and suppressing the occurrence of cracks. The results of this paper will help to a better understanding of the deformation mechanism of Nd-Fe-B permanent magnet and provide a valuable theoretical guidance for the preparation of high-performance Nd-Fe-B magnetic rings.

Microstructural Dependence of the Impact Toughness of TP316H Stainless Steel Exposed to Thermal Aging and Room-Temperature Electrolytic Hydrogenation.

This work deals with the effects of two individual isothermal aging experiments (450 °C/5000 h and 700 °C/2500 h) and the subsequent room-temperature electrolytic hydrogen charging of TP316H stainless steel on its Charpy V-notch (CVN) impact toughness and fracture behavior at room temperature. Microstructural analyses revealed that aging at 700 °C resulted in the abundant precipitation of intermediary phases, namely, the Cr23C6-based carbide phase and Fe2Mo-based Laves phase, whereas aging at 450 °C resulted in much less pronounced precipitation of mostly intergranular Cr23C6-based carbides. The matrix phase of 700 °C-aged material was completely formed of austenitic solid solution with a face-centered cubic (FCC) crystal structure, whereas an additional formation of ferritic phase with a base-centered cubic (BCC) structure was detected in 450 °C-aged material. The performed microstructure observations correlated well with the obtained values of CVN impact toughness, i.e., a sharp drop in the impact toughness was observed in the material aged at 700 °C, whereas negligible property changes were observed in the material aged at 450 °C. The initial, solution-annealed (precipitation-free) TP316H material exhibited a notable hydrogen toughening effect after hydrogen charging, which has been attributed to the hydrogen-enhanced twinning-induced plasticity (TWIP) deformation mechanism of the austenitic solid solution. In contrast, both aging expositions resulted in significantly lowered hydrogen embrittlement resistance, which was likely caused by hydrogen trapping effects at the precipitate/matrix interfaces in thermally aged materials, leading to a reduced TWIP effect in the austenitic phase.

In-situ electron channeling contrast imaging of local deformation behavior of lath martensite in low-carbon-steel

In-situ tensile Electron Channeling Contrast Imaging (ECCI) observations were performed on low-carbon steel lath martensite to elucidate its plastic deformation mechanisms under tensile loading. Two key deformation processes were identified through the direct observation of dislocation activity: intra-lath crystallographic slip and boundary sliding. The initial dislocation movement signifies the onset of microscopic yielding in lath martensite. As the applied stress increases, macroscopic yielding occurs when dislocations overcome internal barriers like high-dislocation-density walls within the laths. Out-of-lath-plane slip systems exhibit a strong interaction with the lath boundary, hindering their activity after initial small plastic deformation. In contrast, in-lath-plane slip systems predominantly contribute to plastic deformation. After the work hardening triggered by these slip systems, boundary sliding takes over the plastic deformation. The boundary sliding was found to accompany a rapid movement of the dislocation network adjacent to the boundary.

Experimental behavior and fracture prediction of a novel high-strength and high-toughness steel subjected to tension and shear loading tests

In this study, laboratory testing and numerical simulation methods are used to investigate the mechanical behavior and perform fracture prediction of a novel high-strength and high-toughness steel with a negative Poisson's ratio (NPR) effect under combined tensile-shear loading conditions. A test device capable of meeting different tensile-shear combination test angles is designed and manufactured, wherein the mechanical experiments on the NPR (Negative Poisson's Ratio) steel specimens are carried out at various testing angles. Q235 steel and MG400 steel are used as experimental control groups. The results show that the mechanical deformation of NPR steel is significantly better than that of Q235 steel and MG400 steel. Its tensile-shear test curve has no yield plateau and it has quasi-ideal elastic-plastic mechanical properties. The loading direction gradually changes from tension-dominated to shear-dominated as the tension-shear angle increases, and the strength and deformation of the specimens show a decreasing trend. Based on the laboratory test results, a finite element numerical model of NPR steel is established. A series of numerical simulations are carried out under the conditions of different tension and shear angles and the average stress triaxiality and fracture strain data are obtained. The fracture data of NPR steel are fitted using the Johnson-Cook fracture criterion, and the Johnson-Cook fracture parameters under the tensile-shear test conditions of NPR steel are thus obtained. The numerical simulation verifies that the fracture model can accurately predict the tensile-shear fracture behavior of NPR steel.

A Unique Time-Reversal Algorithm-Enabled Flexible Ultrasound Transducer with a Controllable Acoustic Field.

Flexible ultrasonic devices represent a feasible technology for providing timely signal detection and even a non-invasive disease treatment for the human brain. However, the deformation of the devices is always accompanied by a change in the acoustic field, making it hard for accurate focusing. Herein, we report a stable and flexible transducer. This device can generate a high-intensity acoustic signal with a controllable acoustic field even when the device is bent. The key is to use a low-impedance piezoelectric material and an island-bridge device structure, as well as to design a unique time-reversal algorithm to correct the deviation of signals after transcranial propagation. To provide an in-depth study of the acoustic field of flexible devices, we also analyze the effects of mechanical deformation and structural parameters on the corresponding acoustic response.

Realizing the strength-ductility balance of a warm-rolled 10 Mn steel via preparing dual nano-sized precipitates

A novel strategy involving warm rolling and tempering-annealing was introduced to optimize the strength-ductility balance of Fe-10.2Mn-2.2Al-0.41C-0.6 V (wt. %) steel. The V- and κ-carbide particles produced during the tempering are critical for tailoring the austenite characteristics during the subsequent annealing. Austenite that nucleates on Mn-rich κ-carbides inherit their high Mn content and fine grain size. Quantitative calculations suggest that the pinning effect exerted by the V-carbide particles strongly resists grain boundary motion and recrystallization grain growth, further refining the final microstructure. Moreover, the dual nano-sized particles induce abnormal variations in the grain size and fraction of austenite, influencing the deformation mechanisms. In the absence of deformation twins, the fresh martensite develops into “separating walls” to refine the microstructure and further enhances the work hardening in addition to the complex dislocation mobile. Finally, the tempered-annealed sample demonstrated a simultaneous increase in the yield and tensile strengths from 1166 to 1452 MPa and 1507–1727 MPa, but a slight decrease in the total elongation from 18.6% to 16.8% compared to annealed sample, achieving a good strength-ductility balance.

Atomistic understanding of ductile-to-brittle transition in single crystal Si and GaAs under nanoscratch

Ensuring ductile removal in a grinding process is crucial for achieving the desired finish on a hard and brittle single crystal. This study provides new insights into the material removal processes in Si and GaAs single crystals, exploring their deformation behaviour using Berkovich and Conical tips to replicate contact from a fixed abrasive grit. Experimental observations are compared with Molecular Dynamic (MD) simulations to uncover the atomistic deformation mechanisms during the ductile-to-brittle transition (DBT). Notable plastic deformation and minimal cracking were consistently observed in Si, irrespective of the tips used. MD simulations supported this observation, revealing pronounced chip formation indicative of ductile material removal. The resistance to cracking in Si was attributed to amorphization induced by localized high contact stresses. In contrast, GaAs showed a propensity for cracking, with MD simulations revealing dislocation and slip band formation, and cracks emerging in the areas of substantial plastic deformation. These findings address phenomena not previously discernible in experimental studies due to the challenge of real-time observation. Moreover, the tip geometry was shown to significantly influence stress distribution, impacting deformation and crack formation in GaAs. This study also reveals limitations in predicting the critical depth for DBT in both Si and GaAs throught the amended Bifano, Dow, and Scattergood (aBDS) models and MD simulation, offering nuanced insights into these challenges that have not been extensively explored. It was found that the experimental results exceeded predictions by an order of magnitude. These discrepancies underscore the aBDS model's disregard for essential material properties and tip geometry, while the disparities between MD simulation and experiment are primarily attributed to the inherent limitations in the simulated length scales and challenges in detecting initial subsurface cracks.

Strain localisation and grain boundary-mediated deformation in pure titanium at low and high temperatures: In-situ optical microscopy and digital image correlation

Heterogeneous deformation occurs between grains in polycrystalline α-titanium. Understanding the role of temperature in local deformation is essential for its applications in extreme environments such as cryo- or high-temperature, but the underlying mechanism still remains elusive. Here we report a study of grain-scale deformation behaviour in CP-Ti plate at the temperature range from −60 °C to 280 °C. The full-field strain measurements were conducted on the tensile samples loaded parallel (RD) and transverse (TD) to the rolling direction, using in-situ optical microscopy and digital image correlation (OM-DIC). The DIC local strain maps were coupled with scanning electron microscopy and electron backscatter diffraction analysis. The grain boundary sliding and slip transfer occurred depending on the geometric relationship (i.e., deformation compatibility) between adjacent grains at 20 °C, and a micro-crack was observed at the {101‾1} twist boundary. The strain was recovered in the grains in the RD sample favourable for slip, whilst more accumulated in the grains in TD sample unfavourable for slip at 280 °C. The plasticity of grains differs with decreasing temperature to −40 °C, resulting in the presence of soft/hard grain pairs. The strong strain localisation between the soft and hard grains led to the cracking along the GBs (RD) and cross the grains (TD). Interestingly, the cracking was significantly reduced with decreasing temperature to −60 °C due probably to the temperature dependence of the plasticity of grains. The strain-hardening behaviour of α-Ti polycrystals was significantly affected by the temperature and crystal orientation dependence of grain-scale deformation mechanism.

Study on the atomic scale deformation mechanism of the h-BN coating nickel matrix composites

In this paper, molecular dynamics (MD) simulations are applied to study the contact mechanical behavior of hexagonal boron nitride (h-BN) coating/Ni matrix composites during nanoindentation, revealing the material deformation mechanism. A systematic study is carried out on the load-depth curve, temperature response curve, defect morphology, and dislocation density in indentation. The results show that the presence of h-BN coating increases the actual loading area of the matrix, effectively reduces the contact stress between the tip of the indenter and the specimen, and also induces the generation of high-density Shockley dislocations, which increases the dislocation entanglement and leads to the localized hardening of the composites, thus reducing the matrix damage. During the loading process, the temperature of the specimen before the destruction of the h-BN coating is significantly lower than that after the destruction, indicating that the coating tends to block the transfer of temperature to the interior of the specimen, preventing the occurrence of temperature-induced tissue phase changes inside the specimen, and providing good protection for the interior of the specimen.

Mechanical Strain, Temperature, and Misalignment Effects on Data Communication between Piezoceramic Ultrasonic Transducers.

Acoustic waves can be used for wireless telemetry as an alternative to situations where electrical or optical penetrators are unsuitable. However, the response of the ultrasonic transducer can be greatly affected by temperature variations, mechanical deformations, misalignment between transducers, and multiple layers in the propagation zone. Therefore, this work sought to quantify such influences on communication between ultrasonic transducers. The experimental measurements were performed at the frequency where power transfer is maximized. Moreover, there were four experimental models, each with its own performed setup. The ultrasonic transducers are attached to both sides of a 6 mm thick stainless-steel plate for configuring just one barrier. Multiple layers of transducers are attached to the outer side of two plates immersed in an acoustic fluid with a 100 mm thick barrier. In both cases, the S21 parameter was used to quantify the influence of the physical barrier because it correlates with the power flow between ports that return after a given excitation. The results showed that when a maximum deformation of 1250 μm/m was applied, the amplitude of the S21 parameter varied around +0.7 dB. Furthermore, increasing the temperature from 30 to 100 °C slightly affected the S21 (+0.8 dB), but the signal decayed quickly for temperatures beyond 100 °C. Additionally, the ultrasonic communication with a multiple layer was found to occur under misalignment with an intersection area of up to 40%. None of the factors evaluated resulted in insufficient power transfer, except for a large misalignment between the transducers. Such results indicate that this type of communication can be a robust alternative, with a minimum alignment of 40% between transducers and electrical penetrators.

Microstructural evolution and mechanical behaviors of rock salt in energy storage: A molecular dynamics approach

The microstructure of rock salt significantly influences its macroscopic mechanical behaviors and deformation phenomena. Understanding the deformation and failure characteristics of rock salt at multiple scales is crucial for the secure and efficient functioning of energy storage in salt caverns. Although the macroscopic behaviors of rock salt are well understood, the microstructural changes occurring under uniaxial compression have not been thoroughly investigated. This study aims to investigate the evolving laws of rock salt microstructure and mechanical properties during the damage process, thereby providing a fundamental understanding of the underlying mechanism. To achieve this, a series of characterization tests on rock salt were conducted to study its microstructure and defects. Building on this, molecular dynamics simulations were utilized in rock mechanics to elucidate the mechanical behaviors, structural evolutions, and dislocation motions of rock salt during the damage process. The rock salt obtained from Qianjiang, China, is a polycrystalline material with an average subgrain size of 46 nm and an average dislocation density of 4.76 × 10−6 1/Å2. Uniaxial compression of single crystal NaCl exhibits three stages: elastic compression, rapid dislocation multiplication, and forest hardening. Scattered dislocations and isolated dislocation tangles trigger further plastic slippage, leading to decreased strength. Later, the formation of a dislocation cell network hinders further slip and reinforces the strength of rock salt. Plastic deformation is found to be a dominant factor in grain refinement and the formation of polycrystalline structures. Intergranular cracking results from cross-patterned dislocation lines on grain boundaries, which become vulnerable areas of the structure. This study describes the evolutionary process of rock salt microstructures and mechanical properties, identifies the micro-destruction mechanisms during the damage process at the ionic level, and provides insights into the micro-mechanical behavior of rock salt and for the design and stability assessment of underground energy storage facilities.

Ni4Ti3 precipitates formed in NiTi alloy modulated by powder bed fusion and their effects on mechanical and electrical deformation

In this study, NiTi alloys featuring different distributions and morphologies of Ni4Ti3 precipitates were developed via powder bed fusion (PBF) technology. The effects of these Ni4Ti3 precipitates on the mechanical, resistive, and electrical deformational properties of the alloys were also studied. With increasing laser energy density, a coarsening behavior of the semi-coherent Ni4Ti3 precipitates was observed, with these precipitates transitioning from needle-like to disk-like structures. Consequently, their coherence with the B2 matrix diminished, thus weakening the surrounding strain field. The presence of dislocations and uniformly dispersed Ni4Ti3 precipitates, endowed the NiTi alloy with enhanced resistivity (7.294 μΩ·m) and stable tensile recovery strain (2–4 %) during stress-controlled loading and unloading. Employing PBF, a NiTi spring actuator was produced, capable of lifting loads over 145 times its weight, with a shape-memory recovery efficiency of 76.80 % at a current of 3.0 A. This study demonstrated the versatility of PBF technology in tailoring the microstructure of NiTi alloys by adjusting the laser energy density, providing a laboratory reference for advanced applications in electrically induced deformation.

Residual stress and crystallite size analysis of SMAT on AA7075-T6

The study examines how SMAT influences the microstructure, dislocation density, and residual stress of AA7075-T6 alloy. SMAT involves the repeated impact of shots on a material surface within a vibration chamber, inducing severe plastic deformation and grain refinement. The study explores the interplay between vibration-induced shot effects and their impact on surface properties, emphasizing the importance of optimizing process parameters for improved material performance. Experimental analyses, including surface and subsurface microstructure examinations, X-ray diffraction (XRD) characterization, and residual stress evaluations, are conducted to elucidate the underlying mechanisms of SMAT. Results indicate that SMAT leads to significant plastic deformation, grain size reduction, increased dislocation density, and microstrain. The treatment produces a nanocrystallite layer, enhancing material properties. Residual stress measurements reveal a surface stress of −245 MPa, increasing to −360 MPa at 50 µm depth. The proposed multiple impact model accurately predicts deformation behavior, highlighting the deep pit regions formed during SMAT. This comprehensive investigation provides insights into the dynamic nature of SMAT and its potential for enhancing material properties. By integrating experimental findings with numerical modeling approaches, the study advances our understanding of SMAT-induced plastic deformation mechanisms and residual stress profiles.

Spin-Mechanical Coupling in 2D Antiferromagnet CrSBr.

Spin-mechanical coupling is vital in diverse fields including spintronics, sensing, and quantum transduction. Two-dimensional (2D) magnetic materials provide a unique platform for investigating spin-mechanical coupling, attributed to their mechanical flexibility and novel spin orderings. However, studying their spin-mechanical coupling presents challenges in probing mechanical deformation and thermodynamic property changes at the nanoscale. Here we use nano-optoelectromechanical interferometry to mechanically detect the phase transition and magnetostriction effect in multilayer CrSBr, an air-stable antiferromagnet with large magnon-exciton coupling. The transitions among antiferromagnetism, spin-canted ferromagnetism, and paramagnetism are visualized. Nontrivial magnetostriction coefficient 2.3 × 10-5 and magnetoelastic coupling strength on the order of 106 J/m3 have been found. Moreover, we demonstrate the substantial tunability of the magnetoelastic constant by nearly 50% via gate-induced strain. Our findings demonstrate the strong spin-mechanical coupling in CrSBr and pave the way for developing sensitive magnetic sensing and efficient quantum transduction at the atomically thin limit.

Revealing the failure mechanism of 2D triaxially braided composites under off-axial tension through mesoscale simulations

The external load angle is known to have a significant influence on the mechanical behavior of two-dimensional triaxially braided composites (2DTBCs). However, the experimental data for 2DTBCs under off-axial loading provide limited information for understanding the failure mechanisms. In this study, a comprehensive mesoscale finite element (FE) model for simulating 2DTBC specimens was established to evaluate the mechanical responses and damage characteristics when off-axial tensile loads are applied. The FE model effectively captured the mechanical response at five distinct angles (0°, 30°, 45°, 60°, and 90°) and revealed the evolving patterns of failure behavior, damage morphology, and out-of-plane deformation mechanisms corresponding to the different loading angles. The findings indicate that, when the external load aligns with the axial fiber bundle direction, the primary failure mechanism involves the fracture of load-bearing fiber bundles. In contrast, deviations from the axial loading direction resulted in failure that was primarily due to the undulation of the bias fiber bundles, resulting in a loading angle–dependent warping at the edge of the specimen due to local shear stress concentration. The findings of this study provide valuable insights that can inform the design of structures with improved application.