Improvement Of Mechanical Properties Research Articles

Microstructure evolution and mechanical properties improvement of (Ti8Zr6Nb4V5Cr4)100−xAlx lightweight high-entropy alloy by Laves phase transformation

Microstructure evolution and mechanical properties improvement of (Ti8Zr6Nb4V5Cr4)100−xAlx lightweight high-entropy alloy by Laves phase transformation

Improvement in microstructure and mechanical properties of wire arc additively manufactured 7075 aluminum alloy via adjusting TiC particle addition

7075 aluminum alloys with varying TiC particle additions were fabricated by simultaneously depositing a standard 7075 wire and a TiC treated wire at different wire feed speed ratios. The effects of TiC content on the microstructure and mechanical properties of 7075 alloy were investigated. Results indicated that the addition of TiC particles can effectively refine the grain structure through heterogeneous nucleation, and the grain refinement effect was enhanced with increasing TiC particle content in the range of 0–0.70 wt%. Moreover, TiC particles can restrain the continuous distribution of second phase at grain boundaries. TiC particles tended to cluster at grain boundaries as its content exceeded 0.48 wt%, which adversely affected their beneficial effect on the improvement of mechanical properties. At an optimal TiC content of 0.48 wt%, the tensile strength and elongation in the horizontal direction exhibited remarkable enhancements of 27.2% and 319%, respectively, compared to those without the addition TIC particle.

Synthetical improvement of dynamic mechanical property and toughness for precast concrete element based on optimization design of composition and curing regime

The brittleness and toughening measures of steam-cured concrete are currently less researched aspects. This study focuses on exploring the improvement in the toughness of steam-cured concrete and evaluating its influence on dynamic mechanical properties through a series of macroscopic performance tests. These tests include four-point bending tests, three-point bending fracture tests, uniaxial compression tests, and drop hammer impact tests, all conducted from the perspective of optimizing composition materials and steam curing regimes. The experimental results indicate that, under a relatively short heating time and a prolonged constant temperature curing period, the pure cement steam-cured concrete (S1 group), compared to the S2 group which used 20 % FA and 10 % GGBS to replace cement while also increasing the aggregate content with a modified steam curing regime, exhibited higher strength and elastic modulus but also showed greater brittleness. For example, the damping ratio increased to 0.6–0.7, the flexural-to-compressive strength ratio exceeded 6, and the number of specimens damaged by drop hammer impact significantly decreased, and the notch specimen exhibits lower peak load and displacement during fracture, with generally lower fracture parameter values. The fracture energy of the S2 group is 100–130 N·m-1 higher than that of the S1 group, reaching approximately 670 N·m-1, and the ductility index increased by 0.3–0.4. This research can provide technical support for the high-quality preparation of precast components using steam-cured concrete and offer a theoretical basis for reducing the brittleness of steam-cured concrete.

Relationship between microstructure and mechanical properties of V-N microalloyed high strength ship plate steel

V-N microalloying treatment is an important way to improve the service performance of non-quenched and tempered ship plate steel. Herein, the influence of V(C, N) on the evolution of microstructure and improvement of mechanical properties was studied. In addition, the relationship between microstructure and mechanical properties of V-N microalloyed high strength ship plate steel was revealed. The results showed that the composite addition of V and N not only formed a fine dispersed precipitated phase, but more importantly, significantly refined the ferrite/pearlite microstructure, promoted the formation of intragranular acicular ferrite, increased the proportion of high angle grain boundaries, and decreased the kernel average misorientation value. The optimization of microstructure brought about by V-N microalloying achieved synchronous improvement of strength and cryogenic toughness. The impact energy of V-N microalloying ship plate steel increased from 97 J of V-N-free ship plate steel to 239 J at −40 °C, and the impact fracture mode changed from brittle quasi-cleavage fracture to microvoid coalescence fracture with a large number of equiaxial dimples.

Effect of thermo-mechanical treatment on cryogenic mechanical properties of a medium-entropy Fe65Co12.5Ni12.5Cr9.5C0.5 alloy produced by the laser-based powder bed fusion

Microstructure and mechanical properties of the Fe65Co12.5Ni12.5Cr9.5C0.5 (in at.%) medium-entropy alloy obtained by the laser-based powder bed fusion (PBF-LB) was investigated in the as-produced condition and after (i) annealing in the interval 800 - 1100 °C or (ii) cold rolling followed by annealing at 800 °C. The as-produced microstructure was found to be surprisingly stable; noticeable recrystallization occurred only after annealing at 1100 °C. Cold rolling resulted in the formation of typical deformed microstructure, while further annealing led to the formation of a fine-grained recrystallized microstructure. A considerable improvement in cryogenic mechanical properties was obtained after some thermo-mechanical treatments due to the transformation-induced plasticity (TRIP) effect. The cold-rolled alloy had the best cryogenic strength characteristics; yield strength and ultimate tensile strength were found to be 1740 MPa and 2235 MPa, respectively. High strength was combined with a pronounced value of elongation to fracture of 24%. Detailed analysis of microstructure and corresponding mechanical behavior changes caused by various processing of the as-produced alloy are presented.

Comparison of electronic structures, thermodynamic, optical and mechanical properties of MgB2 and MgMB4(M=Al, Pb, W) based on first-principles

As an important superconducting material, MgB2 has a wide range of applications in electronics and communication fields. The optimization of its properties has been a hot research topic. In this paper, it uses first-principles calculations to delve into the impact of doping Type-I superconducting elements M (M = Al, Pb, W) on the properties of MgB2. The main focus is on exploring improvements in thermodynamic, optical and mechanical properties in conjunction with the analysis of electronic properties. For thermodynamic properties, MgPbB4 demonstrates significant variation in entropy and free energy as temperature increases, reaching 356.84 KJ/mol and −411.46 KJ/mol, respectively, at 2000 K. Regarding optical properties, the absorption band edge disappears and the range widens with the introduction of M elements. Specifically, MgWB4 exhibits the highest reflectivity R (0) and static dielectric constant ε1 (0) in the [001] direction, measured at 0.49 and 32.2, respectively. In terms of mechanical properties, the elastic modulus of MgAlB4 and MgWB4 enhances notably with B/G ratios less than 1.75, indicating their brittleness. MgWB4, in particular, stands out with the highest elastic modulus and the weakest elastic anisotropy AU (0.703), exhibiting a spatial distribution nearer to spherical. Conversely, MgPbB4 transforms the material into a ductile one, with reduced elastic modulus and the strongest anisotropy AU (4.963). This study can provide a more comprehensive perspective for the future design of MgB2-based materials.

Improvement of mechanical properties of TATB-based polymer bonded explosive by surface confinement and interfacial strengthening

Improvement of mechanical properties of 1, 3, 5-triamino-2, 4, 6-trintrobenzene (TATB) based polymer bonded explosives (PBX) is extremely desirable but still a big challenge. In this study, surface confinement and interfacial strengthening strategies were used to enhance the mechanical properties of TATB-based PBX. Firstly, TATB crystals were coated with a polydopamine (PDA) layer. Subsequently, various amounts (0.3, 0.5 and 0.8 wt%) of neutral polymeric bonding agent (NPBA) were grafted onto the PDA layer using 2,4-toluene diisocyanate as a molecular bridge. The results showed that the modified TATB composites-based PBX exhibited improved mechanical strength, as well as creep resistance properties compared to the raw TATB-based PBX. The modified TATB composites-based PBX with 0.5 wt% NPBA grafting content exhibited the highest mechanical strength and creep resistance due to the surface confinement effect of the rigid crosslinked PDA layer and interfacial strengthening effect of the NPBA layer. Present work might provide a promising strategy for synergistically improving the mechanical properties of TATB-based PBX.

Mechanical properties improvement of titanium alloy and its grain boundary dislocation evolution mechanism by novel electroshock treatment

Titanium alloys are extensively utilized in the aerospace industry due to their exceptional strength and resistance to corrosion. However, litmited performance and high dispersion has always existed for the traditional manufacturing process. A novel Electroshock Treatment (EST) procedure proposed by author's team can synergistically improve the mechanical properties and its consistency of titanium alloys under limited temperature rise, but the relevant mechanism is not yet clear. In present work, the effects of various EST conditions on the mechanical characteristics were investigated by uniaxial tensile testing, and the effect mechanism was revealed using multi-scale microstructure characterization of titanium alloys, such as SEM, EBSD and TEM. The uniaxial tensile test results show that, compared with the sample without EST, the average elongation after fracture improved by 12.5%, the strength-plastic product improved by 16.1%, and the consistency of UTS and elongation after fracture improved by 63.4% and 57.1%, respectively, with a slight increase of tensile strength (30 MPa) after appropriate treatment (current density of 0.93 × 108A/m2, and pulse duration of 300 ms). The multi-scale microscopic characterization reveals a more uniform distribution of stress concentration in TC11 titanium alloy following the appropriate EST process. Besides, the entanglement of dislocations is reduced with some dislocations being annihilated. Especially, the remaining dislocations undergoing orderly rearrangement at grain boundaries after EST. The homogenization of local lattice distortion distribution and orderly rearrangement of dislocations at grain boundaries are the primary factors contributing to the comprehensive improvement in the mechanical properties and consistency of TC11 Titanium alloy.

Microstructure, mechanical, and tribological properties of transition metal (Nb, V, W) nitride coating on AISI-1045 steel by cathodic cage plasma deposition

AISI-1045 steel is a medium-carbon, medium-strength steel that usually requires surface engineering to be usable in industrial applications. Using the cathodic cage plasma deposition technique, transition metal (Nb, V, W) nitride coating is deposited on this steel using cathodic cage lids of these metals. The hardness of untreated steel (1.8 GPa) is upgraded to 11.2, 12.2, and 9.7 GPa for niobium nitride, vanadium nitride, and tungsten nitride coating, respectively. The elastic modulus, the ratio of hardness-elastic modulus (H/E, H2/E, and H3/E2), and the plasticity factor depict the improvement in mechanical and elastic properties. The sample treated with a niobium cage lid exhibits the Nb4N5 phase, the vanadium cage lid shows the VN phase (along with the Fe4N phase), and the tungsten cage lid consists of W2N3, WFeN2, and Fe4N phases. Among these coatings, the thickness of niobium nitride coating is maximum (1.87 μm), and a low deposition rate is obtained for tungsten nitride coating (0.83 μm). In addition to this coating, a nitrogen diffusion zone (∼60 μm) is also formed beneath the coating, which creates a hardness gradient between the coating and the substrate. The ball-on-disc wear tester shows that niobium nitride coating deposition reduces the wear rate from 19.5 × 10−3 to 8.8 × 10−3 mm3/N m and exhibits excellent wear performance.

Simultaneously Strengthening and Toughening All‐Natural Structural Materials via 3D Nanofiber Network Interfacial Design

AbstractConstructing structural materials from sustainable raw materials is considered an efficient way to reduce the potential threat posed by plastics. Nevertheless, challenges remain regarding combining excellent mechanical and thermal properties, especially the balance of strength and toughness. Here, we report a 3D nanofiber network interfacial design strategy to strengthen and toughen all‐natural structural materials simultaneously. The introduced protonated chitosan at the interface between the surface oxidized 3D nanonetwork of bacterial cellulose forms the interfacial interlocking structure of nanonetworks, achieving a robust physical connection and providing enough physical contact sites for chemical crosslinking. The obtained sustainable structural material successfully integrates excellent mechanical and thermal properties on the nanoscale of cellulose nanofibers, such as light weight, high strength, and superior thermal expansion coefficient. The relationship between structural design and comprehensive mechanical property improvement is analyzed in detail, providing a universal perspective to design sustainable high‐performance structural materials from nanoscale building blocks.

Process Parameter Optimisation in Laser Powder Bed Fusion of Duplex Stainless Steel 2205

Additive Manufacturing (AM) appears as a very interesting alternative to conventional production routes for alloys and metals, thanks to the fact that at the end of printing, the final product is obtained directly. The present article looks for the inclusion of duplex stainless steel 2205 (DSS-2205) in the commercial catalog of steels utilized in powder bed fusion (PBF) technologies, specifically applying the selective laser melting (SLM) technique. The main objective is to establish optimal printing parameters that reproduce the closest results to the base material properties. To achieve this, the response surface method was used in the methodology and experimental design, studying the parameters of laser power, scanning speed, and hatching distance. A reference material, machined from a hot-rolled plate, was utilized to compare the results obtained through tensile strength. Lastly, the optimal parameters have been obtained for this stainless steel. Additionally, a study of heat treatments has been developed, aiming to optimize the austenitization process, achieving an improvement in mechanical properties. A steel with mechanical properties practically identical to those of steel produced using conventional techniques has been obtained through SLM.

Characterization and Properties of Binder and Nano-Filler in Geopolymer Paste with Graphene Oxide

Globally, current research has developed new cement-based materials to meet increased demands for performance, energy efficiency, and environmental protection. Geopolymer, cost-effective, and high-early strength concrete binder alternative, has grown in popularity. Geopolymer reduces emissions by 80% during production while maintaining strength levels comparable to Ordinary Portland Cement (OPC). In their natural state, geopolymer binders have a microstructure that is cross-linked and significantly more brittle than OPC. To improve the properties of geopolymer, several approaches were adopted. However, recent study suggests that incorporating nanomaterials such as graphene oxide (GO) to geopolymer has shown an improvement in physical and mechanical properties. Graphene oxide is an inorganic nanomaterial that improves the mechanical characteristics of various composite materials by showing substantial filling effects on composite materials that significantly improve composite material integrity. The investigation into the potential of GO to improve the efficacy of geopolymer composite materials in various engineering applications has garnered considerable attention in recent years. The simplified hummer’s method was employed to synthesise the GO. Various characterization techniques involving SEM, XRD, and FTIR were utilized to understand the crystalline structure and microstructure of GO nanoparticles. GO powder were used as 0.05%, 0.10%, 0.15%, 0.20%, and 0.25% by weight of binder that includes fly ash class F and steel slag with an optimum binder modification of 40% fly ash and 60% steel slag. The influence of GO on Bulk density, microstructure, and mechanical strength were determined. The compressive strength results indicated an improvement of compressive strength by 21.48% in geopolymer paste with 0.15% GO after 28 days of curing.

Application of Cinnamon Essential Oil in Active Food Packaging: A Review

Active packaging allows for preserving the properties of food, extending shelf life, and safeguarding food safety through the interaction of their diverse components with the product. The incorporation of essential oils, particularly cinnamon essential oil, as active components is emerging as an increasingly relevant alternative to synthetic additives. This work aims to provide an overview of the application of cinnamon essential oil as a bioactive compound in food packaging. Cinnamon essential oil exhibits a highly variable composition, with cinnamaldehyde standing out as one of the predominant components responsible for the antimicrobial properties. Phenolic compounds, on the other hand, endow the oil with outstanding antioxidant activity. The application of this oil in active packaging, whether in the form of films or coatings, has demonstrated a significant improvement in optical, mechanical, and water vapor barrier properties. Moreover, its ability to inhibit microbial growth and lipid oxidation in the applied foods has been evidenced. However, despite the promising prospects of using essential oils in active packaging for food preservation, detailed regulation is still required for industrial-level implementation.

Optimizing the microstructure and enhancing the mechanical prsoperties of hypereutectic Al–Si alloys by Mg addition

The impact of Mg on the solidification structure of hypereutectic Al–Si alloys with different Si contents (15 wt% and 18 wt%) was investigated. 3%Mg was added to Al–15Si alloy to modify the phases in the solidification structure for the improvement of mechanical properties, and T6 heat treatment was used to optimize the microstructure and precipitate strengthening phase. The solidification structure was observed by OM and TEM respectively, and the precipitation behavior of each phase was detected through DSC. The results show that the addition of Mg decreased the undercooling of the alloy melt, thus suppressing the precipitation of primary Si phase. Nanoscale β” precipitates were precipitated in the matrix after T6 heat treatment. This resulted in an increase of 54% and 165% in the UTS and EL of the alloy, reaching 252 MP and 15.1%, respectively. Primary Si crystals were present in two forms in Al–18Si–8Mg alloy: spinel twin and non-twin, while Mg2Si always maintained the faceted crystals during the growing process, where only (100) and (111) crystal planes were observed. XRD, SEM and EBSD have been used to prove that Mg2Si crystals with different morphologies could become the heterogeneous nuclei of two types of primary Si crystals. The process of nucleation and growth of primary Si with Mg2Si as the heterogeneous nuclei was experimentally analyzed and theoretically predicted.

Effect of Graphene Quantum Dots (GQDs) on the mechanical, dynamic, and durability properties of concrete

Addressing ecological concerns stemming from concrete usage is paramount, prompting exploration into additives for mitigation. Graphene quantum dots (GQDs) have been recognized for their potential to improve the mechanical attributes of cement composites. Additionally, the electrochemical reduction of a saturated solution of carbon dioxide (CO2) and monoethanolamine (CO2-MEA) effectively removes CO2 from the atmosphere. This study delves into the influence of GQDs on the mechanical and durability aspects of concrete. It is noted that the control mix of concrete without GQDs was specifically designed for concrete railway sleepers. Varied proportions of GQDs, ranging from 0.3 % to 1.2 % at 0.3 % increments, were incorporated to assess their impact on fresh and hardened concrete properties. Mechanical properties such as compressive strength, splitting tensile strength, flexural strength, and dynamic properties were evaluated. Durability assessments encompassing water absorption and chloride ion penetration were conducted. Microstructural analysis via Field Emission Scanning Electron Microscopy (FESEM) imaging and Energy-dispersive X-ray spectroscopy (EDS) elucidated the concrete's internal composition. Notably, an optimal GQDs percentage of 0.3 % was observed, signifying its efficacy in enhancing the performance of concrete. When 0.3 % of GQDs was added to concrete, compressive strength, split tensile strength, and flexural strength were enhanced by 10.8 %, 23 %, and 11 % respectively. The incorporation of GQDs resulted in a notable improvement in the fundamental frequencies and dynamic modulus of elasticity. Concurrently, a decrease in the damping ratio was observed for specimens containing GQDs. Additionally, the porosity and chloride penetration depth were lower by 6 % and 30 % for specimens with 0.3 % GQDs. The improvement in workability, mechanical, and dynamic properties of concrete, along with reducing CO2 from the atmosphere, makes GQDs an ideal eco-friendly material. This study is the first to open new pathways for the development of construction materials that are not only structurally superior but also environmentally responsible, marking a significant step forward in the field of civil engineering materials, especially in railway applications.

Effect of nanosized carbon nanotubes, Titanium Nitride and cubic Boron Nitride powders on mechanical and thermal properties of SLA 3D printed resin composites

AbstractThis study explores the development of nanocomposites by incorporating multi‐walled carbon nanotubes (MWCNT), titanium nitride (TiN), and cubic boron nitride (c‐BN) nano powders into photo‐polymer epoxy resins for use in Stereolithography (SLA) additive manufacturing. Mechanical and thermal properties were systematically investigated to assess their performance. Initially, MWCNT, TiN, and c‐BN nano powders were homogeneously mixed with the resin to ensure uniformity. The resulting mixtures were then processed using SLA technology to evaluate production quality and material performance. The study revealed significant improvements in mechanical and thermal properties compared to pure resin, aligning with previous research outcomes. Specifically, the incorporation of MWCNT led to a notable enhancement in thermal conductivity, showing an increase of 24.21% as the thermal conductivity coefficient increased from 0.19 to 2.36 W/m·k. On the other hand, c‐BN significantly boosted mechanical strength, resulting in a substantial 20.45% increase as the shore D hardness went from 88.53 to 106.64. These findings highlight the promising potential of nanocomposites across various industries including electronics, aerospace, automotive, construction, medical devices, and manufacturing.Highlights Developed nanocomposites with MWCNT, TiN, and c‐BN in SLA resin. c‐BN increased hardness by 20.45%, proving its effectiveness in composites. MWCNT enhanced thermal conductivity by 24.21%, boosting material performance. Pioneering use of TiN and c‐BN in SLA, addressing gaps in existing research. Applications span electronics, aerospace, automotive and medical devices.

Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) Self-Reinforced Composites via Solvent-Induced Interfiber Welding of Nanofibers.

In this study, we explore an approach to enhance the mechanical performance of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by utilizing the self-reinforcing effect of β-phase-induced PHBV electrospun nanofiber mats. This involves electrospinning combined with low-temperature postspun vapor solvent interfiber welding. Scanning electron microscopy imaging confirmed fiber alignment, while XRD diffraction revealed the presence of both α and β crystalline phases under optimized electrospinning conditions. The resulting composite exhibited significant improvements in mechanical properties attributed to the formation of more perfectly structured α and β polymorphs and enhanced interfacial adhesion of electrospun nanofibers after vapor solvent treatment. This approach offers entirely recyclable and biodegradable materials, presenting the potential for a new family of sustainable bioplastics.

Enhancing Mechanical Properties of Aluminium-Based Biocomposites through the Addition of Hybrid Reinforcing Particulates

This study looks into the improvement of mechanical properties in Al-7Mg-2Si-0.1Nb-based biocomposites by incorporating hybrid additions of Irvingia Wombolu Shell Particulates (IWSP) and Mangifera indica shell particulates (MISP). The biocomposites were created using the stir-casting technique. Tensile, hardness, and impact strength were used to determine the mechanical properties of the developed biocomposites. The study shows that the additions of IWSP and MISp have a significant impact on the biocomposites’ properties. The addition of hybrid 2wt% IWSP and 10wt% MISP resulted in a higher percentage elongation compared to the base alloy. The ultimate tensile strength of the biocomposites increased significantly with the addition of both IWSP and MISP, peaking at 6wt% IWSP and 6 wt% MISP. The hybrids of IWSP and MISP consistently demonstrated higher tensile strength, reaching a maximum ultimate tensile strength of 132 MPa. The hardness properties of the biocomposites improved with the addition of IWSP and MISP, with the highest values observed in hybrid combinations of 6 wt% IWSP and 6 wt% MISP. Specifically, the addition of 6wt% IWSP and 6wt% MISP resulted in a remarkable 34.9% increase in hardness. The study found that adding IWSP and MISP significantly improved the impact strength of the Al-7wt%Mg-2wt%Si-0.1wt%Nb alloy matrix, with a maximum value of 45 J at a hybrid 6 wt% IWSP and 6 wt% MISP. These findings demonstrate the ability of hybrid additions to improve the mechanical properties of Al-7Mg-2Si-0.1Nb-based biocomposites, making them a promising candidate for a variety of engineering applications.

Development of high-strength geopolymer mortar based on fly ash-slag: Correlational analysis of microstructural and mechanical properties and environmental assessment

Given the insufficient mechanical performance of existing fly ash-based geopolymer mortars under ambient curing conditions, this study is dedicated to developing a high-strength geopolymer mortar that meets the requirements of modern structural engineering. Based on the rheological performance tests of the fresh geopolymer mortar, the evolution of its rheological characteristics was revealed. Through macroscopic mechanical performance tests, the influence of slag content on the compressive and flexural strength of geopolymer mortar was clarified. Employing microstructural performance testing methods such as Thermogravimetric and Mercury Intrusion Porosimetry, the micro-mechanisms behind the improvement of mechanical properties were revealed. Utilizing the grey relational analysis method, a framework was established to analyze the correlation between the microstructural and macroscopic mechanical properties of geopolymer mortar. Additionally, an assessment system for evaluating environmental and economic benefits was developed using statistical analysis methods. The results show that increasing slag content enhances the yield stress and plastic viscosity of geopolymer mortar. Optimizing slag content boosts the compressive strength of fly ash-based geopolymer mortar, reaching up to 88.13 MPa under ambient curing conditions. An optimal amount of slag also promotes gel formation during polymerization, improving the internal pore structure. Furthermore, the content of reaction products correlates more strongly with macroscopic mechanical properties than pore structure characteristics. Geopolymer mortar also presents significant environmental and economic advantages over traditional cement-based materials, with its carbon and economic intensity indices at only 5.50 % and 10.80 %, respectively, of those in cement-based materials.

Pharmacological Antagonism of Ccr2+ Cell Recruitment to Facilitate Regenerative Tendon Healing.

Successful tendon healing requires sufficient deposition and remodeling of new extracellular matrix at the site of injury, with this process mediating in part through fibroblast activation via communication with macrophages. Moreover, resolution of healing requires clearance or reversion of activated cells, with chronic interactions with persistent macrophages impairing resolution and facilitating the conversion the conversion to fibrotic healing. As such, modulation of the macrophage environment represents an important translational target to improve the tendon healing process. Circulating monocytes are recruited to sites of tissue injury, including the tendon, via upregulation of cytokines including Ccl2, which facilitates recruitment of Ccr2+ macrophages to the healing tendon. Our prior work has demonstrated that Ccr2-/- can modulate fibroblast activation and myofibroblast differentiation. However, this approach lacked temporal control and resulted in healing impairments. Thus, in the current study we have leveraged a Ccr2 antagonist to blunt macrophage recruitment to the healing tendon in a time-dependent manner. We first tested the effects of Ccr2 antagonism during the acute inflammatory phase and found that this had no effect on the healing process. In contrast, Ccr2 antagonism during the late inflammatory/ early proliferative period resulted in significant improvements in mechanical properties of the healing tendon. Collectively, these data demonstrate the temporally distinct impacts of modulating Ccr2+ cell recruitment and Ccr2 antagonism during tendon healing and highlight the translational potential of transient Ccr2 antagonism to improve the tendon healing process.