Mechanical Properties Of Hydrogels Research Articles

Protein-Based Hydrogels and Their Biomedical Applications

Hydrogels made from proteins are attractive materials for diverse medical applications, as they are biocompatible, biodegradable, and amenable to chemical and biological modifications. Recent advances in protein engineering, synthetic biology, and material science have enabled the fine-tuning of protein sequences, hydrogel structures, and hydrogel mechanical properties, allowing for a broad range of biomedical applications using protein hydrogels. This article reviews recent progresses on protein hydrogels with special focus on those made of microbially produced proteins. We discuss different hydrogel formation strategies and their associated hydrogel properties. We also review various biomedical applications, categorized by the origin of protein sequences. Lastly, current challenges and future opportunities in engineering protein-based hydrogels are discussed. We hope this review will inspire new ideas in material innovation, leading to advanced protein hydrogels with desirable properties for a wide range of biomedical applications.

ФОРМУВАННЯ ТА ВЛАСТИВОСТІ СТРУКТУРОВАНИХ ПОЛІАКРИЛАМІДНИХ ГІДРОГЕЛІВ З НАНОЧАСТИНКАМИ CdS

The new method of obtaining nanocomposite hydrogels with embedded mineral nanoparticles has been proposed. CdS nanoparticles have been synthesized in situ in hydrogel matrix based on the copolymer of acrylamide and acrylic acid under the conditions of diffusion fluxes of Cd2+ та S2- structure-forming ions. The formation of CdS nanoparticles in polymeric matrix has been approved by the methods of XRD, energy- dispersive analysis, UV-spectroscopy. The influence of the content of polymer matrix onto physico- mechanical properties of hydrogel has been studied.

Hydrogel-in-hydrogel live bioprinting for guidance and control of organoids and organotypic cultures

Three-dimensional hydrogel-based organ-like cultures can be applied to study development, regeneration, and disease in vitro. However, the control of engineered hydrogel composition, mechanical properties and geometrical constraints tends to be restricted to the initial time of fabrication. Modulation of hydrogel characteristics over time and according to culture evolution is often not possible. Here, we overcome these limitations by developing a hydrogel-in-hydrogel live bioprinting approach that enables the dynamic fabrication of instructive hydrogel elements within pre-existing hydrogel-based organ-like cultures. This can be achieved by crosslinking photosensitive hydrogels via two-photon absorption at any time during culture. We show that instructive hydrogels guide neural axon directionality in growing organotypic spinal cords, and that hydrogel geometry and mechanical properties control differential cell migration in developing cancer organoids. Finally, we show that hydrogel constraints promote cell polarity in liver organoids, guide small intestinal organoid morphogenesis and control lung tip bifurcation according to the hydrogel composition and shape.

Hydrogel-Assisted Double Molding Enables Rapid Replication of Stereolithographic 3D Prints for Engineered Tissue Design.

Tissue-engineered in vitro models are an essential tool in biomedical research. Tissue geometry is a key determinant of function, but controlling the geometry of microscale tissues remains challenging. Additive manufacturing approaches have emerged as a promising means for rapid and iterative changes in the geometry of microdevices. However, it has been shown that poly(dimethylsiloxane) (PDMS) cross-linking is often inhibited at the interface of materials printed with stereolithography. While approaches to replica mold stereolithographic three-dimensional (3D) prints have been described, these methods are inconsistent and often lead to print destruction when unsuccessful. Additionally, 3D-printed materials often leach toxic chemicals into directly molded PDMS. Here, we developed a double molding approach that allows precise replication of high-resolution stereolithographic prints into poly(dimethylsiloxane) (PDMS) elastomer, facilitating rapid design iterations and highly parallelized sample production. Inspired by lost wax casting, we used hydrogels as intermediary molds to transfer high-resolution features from high-resolution 3D prints into PDMS, while previously published work focused on enabling direct molding of PDMS onto 3D prints through the use of coatings and post-cross-linking treatments of the 3D print itself. Hydrogel mechanical properties, including cross-link density, predict replication fidelity. We demonstrate the ability of this approach to replicate a variety of shapes that would be impossible to create using photolithography techniques traditionally used to create engineered tissue designs. This method also enabled the replication of 3D-printed features into PDMS that would not be possible with direct molding as the stiffness of these materials leads to material fracture when unmolding, while the increased toughness in the hydrogels can elastically deform around complex features and maintain replication fidelity. Finally, we highlight the ability of this method to minimize the potential for toxic materials to transfer from the original 3D print into the PDMS replica, enhancing its use for biological applications. This minimization of the transfer of toxic materials has not been reported in other previously reported methods describing replication of 3D prints into PDMS, and we demonstrate its use through the creation of stem cell-derived microheart muscles. This method can also be used in future studies to understand the effects of geometry on engineered tissues and their constitutive cells.

Hybrid Shear-thinning Hydrogel Integrating Hyaluronic Acid with ROS-Responsive Nanoparticles.

Nanoparticle (NP) supra-assembly offers unique opportunities to tune macroscopic hydrogels' mechanical strength, material degradation, and drug delivery properties. Here, synthetic, reactive oxygen species (ROS)-responsive NPs are physically crosslinked with hyaluronic acid (HA) through guest-host chemistry to create shear-thinning NP/HA hydrogels. A library of triblock copolymers composed of poly(propylene sulfide)-bl-poly(N,N-dimethylacrylamide)-bl-poly(N,N-dimethylacrylamide-co-N-(1-adamantyl)acrylamide) are synthesized with varied triblock architectures and adamantane grafting densities and then self-assembled into NPs displaying adamantane on their corona. Self-assembled NPs are mixed with β-cyclodextrin grafted HA to yield eighteen NP/HA hydrogel formulations. The NP/HA hydrogel platform demonstrates superior mechanical strength to HA-only hydrogels, susceptibility to oxidative/enzymatic degradation, and inherent cell-protective, antioxidant function. The performance of NP/HA hydrogels is shown to be affected by triblock architecture, guest/host grafting densities, and HA composition. In particular, the length of the hydrophilic second block and adamantane grafting density of self-assembled NPs significantly impacts hydrogel mechanical properties and shear-thinning behavior, while ROS-reactivity of poly(propylene sulfide) protects cells from cytotoxic ROS and reduces oxidative degradation of HA compared to HA-only hydrogels. This work provides insight into polymer structure-function considerations for designing hybrid NP/HA hydrogels and identifies antioxidant, shear-thinning hydrogels as promising injectable delivery platforms for small molecule drugs and therapeutic cells.

Exploring the Interplay of Antimicrobial Properties and Cellular Response in Physically Crosslinked Hyaluronic Acid/ε-Polylysine Hydrogels.

The reduction of tissue cytotoxicity and the improvement of cell viability are of utmost significance, particularly in the realm of green chemistry. Despite substantial progress, the threat of local infections remains a concern. Therefore, hydrogel systems that provide mechanical support and a harmonious balance between antimicrobial efficacy and cell viability are greatly needed. Our study explores the preparation of physically crosslinked, injectable, and antimicrobial hydrogels using biocompatible hyaluronic acid (HA) and antimicrobial ε-polylysine (ε-PL) in different weight ratios (10 wt% to 90 wt%). The crosslinking was achieved by forming a polyelectrolyte complex between HA and ε-PL. The influence of HA content on the resulting HA/ε-PL hydrogel physicochemical, mechanical, morphological, rheological, and antimicrobial properties was evaluated, followed by an inspection of their in vitro cytotoxicity and hemocompatibility. Within the study, injectable, self-healing HA/ε-PL hydrogels were developed. All hydrogels showed antimicrobial properties against S. aureus, P. aeruginosa, E. coli, and C. albicans, where HA/ε-PL 30:70 (wt%) composition reached nearly 100% killing efficiency. The antimicrobial activity was directly proportional to ε-PL content in the HA/ε-PL hydrogels. A decrease in ε-PL content led to a reduction of antimicrobial efficacy against S. aureus and C. albicans. Conversely, this decrease in ε-PL content in HA/ε-PL hydrogels was favourable for Balb/c 3T3 cells, leading to the cell viability of 152.57% for HA/ε-PL 70:30 and 142.67% for HA/ε-PL 80:20. The obtained results provide essential insights into the composition of the appropriate hydrogel systems able to provide not only mechanical support but also the antibacterial effect, which can offer opportunities for developing new, patient-safe, and environmentally friendly biomaterials.

Focused ultrasound for the remote modulation of nitric oxide release from injectable PEG-fibrinogen hydrogels for tendon repair

Introduction: Tendon disorders such as tendinosis, the degradation of collagen in tendon, or tendonitis, inflammation of tendon tissue, contribute to 30% of musculoskeletal complaints. To address the limitations of currently available treatments for tendon repair, an injectable polyethylene glycol (PEG)-fibrinogen hydrogel encompassing nitric oxide (NO) releasing µ-particles was generated. The release of nitric oxide, a therapeutic molecule that modulates many wound healing processes, from the hydrogel can be modified with thermal and mechanical stimulus. To achieve remote control over NO release from hydrogels after deployment, focused ultrasound (FUS) was explored as it provides highly controlled thermal and mechanical stimulus non-invasively.Methods: In this work, the ability of FUS to remotely elicit on-demand NO generation from acoustically active composite hydrogels via thermal and/or mechanical stimulus was explored. Specifically, the temperature and time-dependent release of NO was simulated and characterized when applying FUS to composite hydrogels.Results: Results from acoustic simulations as well as thermocouple heating studies indicated that high spatial and temporal control over hydrogel warming could be achieved non-invasively with a 3.5 MHz FUS transducer. FUS was also able to remotely control NO release from hydrogels with various thermal magnitudes and durations. Additionally, no apparent changes in the mechanical properties of hydrogels were observed with FUS treatment.Discussion: Utilizing FUS thermal and mechanical stimulus provides a potential method of remotely controlling NO release from hydrogels at a wound site to aid in tendon repair.

The Ogden model for hydrogels in tissue engineering: Modulus determination with compression to failure

Hydrogel mechanical properties for tissue engineering are often reported in terms of a compressive elastic modulus derived from a linear regression of a typically non-linear stress-strain plot. There is a need for an alternative model to fit the full strain range of tissue engineering hydrogels. Fortunately, the Ogden model provides a shear modulus, μ0, and a nonlinear parameter, α, for routine analysis of compression to failure. Three example hydrogels were tested: (1) pentenoate-modified hyaluronic acid (PHA), (2) dual-crosslinked PHA and polyethylene glycol diacrylate (PHA-PEGDA), and (3) composite PHA-PEGDA hydrogel with cryoground devitalized cartilage (DVC) at 5, 10, and 15%w/v concentration (DVC5, DVC10, and DVC15, respectively). Gene expression analyses suggested that the DVC hydrogels supported chondrogenesis of human bone marrow mesenchymal stem cells to some degree. Both linear regression (5 to 15% strain) and Ogden fits (to failure) were performed. The compressive elastic modulus, E, was over 4-fold higher in the DVC15 group relative to the PHA group (129 kPa). Similarly, the shear modulus, μ0, was over 3-fold higher in the DVC15 group relative to the PHA group (37 kPa). The PHA group exhibited a much higher degree of nonlinearity (α = 10) compared to the DVC15 group (α = 1.4). DVC hydrogels may provide baseline targets of μ0 and α for future cartilage tissue engineering studies. The Ogden model was demonstrated to fit the full strain range with high accuracy (R2 = 0.998 ± 0.001) and to quantify nonlinearity. The current study provides an Ogden model as an attractive alternative to the elastic modulus for tissue engineering constructs.

An injectable and self-healing hydrogel with dual physical crosslinking for in-situ bone formation.

Although hydrogels have been widely studied because of their satisfactory biocompatibility and plasticity, their application is limited in bone tissue engineering (BTE) owing to their inadequate mechanical properties and absence of osteogenic activity. To address this issue, we developed an updated alendronate (ALN)-Ca2+/Mg2+-doped supramolecular (CMS) hydrogel based on our previously developed mechanically resilient "host-guest macromer" (HGM) hydrogel to improve the hydrogel's mechanical properties and osteogenic activity. The CMS hydrogel was prepared by introducing a new physical crosslinking comprising the strong chelation of the comonomer acrylate alendronate (Ac-ALN) and Ca2+/Mg2+ in the HGM hydrogel. Compared with the previously developed HGM hydrogel, the upgraded CMS hydrogel presented better mechanical properties because of the additional physical crosslinking, while possessing injectable and self-healing properties like the HGM hydrogel. Moreover, the addition of Ac-ALN and Ca2+/Mg2+ also effectively promoted the in vitro proliferation, migration, and osteogenic differentiation of bone marrow-derived stem cells. The healing effect of a rat cranial defect further proved that the in vivo bone regeneration ability of CMS hydrogel was better than that of HGM hydrogel. The updated CMS hydrogel shows significant potential for BTE application.

Tunable Mesoscopic Collagen Island Architectures Modulate Stem Cell Behavior (Adv. Mater. 16/2023)

Tissue Engineering In article number 2207882, Ryan Y. Nguyen, Michael Mak, and co-workers report the fabrication of collagen I hydrogels with topology that mimics complex extracellular matrix architectures in tissues. The generated mesoscopic features, termed collagen islands, are tunable and modulate bulk hydrogel mechanical properties. Collagen islands can modulate stem cell behavior and differentiation. This hydrogel fabrication method provides novel scaffolding materials for tissue engineering.

Ink Based on the Tunable Swollen Microsphere for a 3D Printing Hydrogel with Broad-Range Mechanical Properties.

The development of the effective 3D printing strategy for diverse functional monomers is still challenging. Moreover, the conventional 3D printing hydrogels are usually soft and fragile due to the lack of an energy dissipation mechanism. Herein, a microsphere mediating ink preparation strategy is developed to provide tailored rheological behavior for various monomer direct ink writings. The chitosan microspheres are used as an exemplary material due to their tunable swelling ratio under the acid-drived electrostatic repulsion of the protonated amino groups. The rheological behaviors of the swollen chitosan microsphere (SCM) are independent on the monomer types, and various functional secondary polymers could be carried at a wide loading ratio by the acid driving. The SCM reinforces the hydrogel as the sacrificial bonds. With the adjustable composition, the 3D printing hydrogel mechanical properties are tunable in wide windows: strength (0.4-1.01 MPa), dissipated energy (0.11-3.25 MJ m-3), and elongation at break (47-626%). With the excellent printing and mechanical properties, the SCM inks enable multi-functional integration for soft device production, such as 4D printing robots and wearable strain sensors. We anticipate that this microsphere mediating 3D printing strategy can inspire new possibilities for the design of the robust hydrogels with a broad range of functionalities and mechanical performances.

Entanglement in Smart Hydrogels: Fast Response Time, Anti‐Freezing and Anti‐Drying

AbstractThe common techniques to improve hydrogel's mechanical properties include increasing crosslinking density and forming crosslinked double‐network hydrogel, which may cause some hydrogels to lose their smart functionalities. Inspired by entanglement‐induced strengthening, a simple approach to introducing hydroxypropyl cellulose (HPC) fibers entangled with different smart hydrogel matrix systems are reported. Different from the conventional methods which hinder the movement of the polymer network, through entanglement with HPC fibers, the composite hydrogel shows both improved Young's modulus and toughness and more importantly improved smart functionalities including response speed, anti‐drying, and anti‐freezing capabilities and cycle stability. This strategy provides a new design rule to fabricate durable and strengthened smart hydrogels which can be used in smart windows, sensors, and soft robots.

Mesoporous Materials Make Hydrogels More Powerful in Biomedicine.

Scientists have been attempting to improve the properties of mesoporous materials and expand their application since the 1990s, and the combination with hydrogels, macromolecular biological materials, is one of the research focuses currently. Uniform mesoporous structure, high specific surface area, good biocompatibility, and biodegradability make the combined use of mesoporous materials more suitable for the sustained release of loaded drugs than single hydrogels. As a joint result, they can achieve tumor targeting, tumor environment stimulation responsiveness, and multiple therapeutic platforms such as photothermal therapy and photodynamic therapy. Due to the photothermal conversion ability, mesoporous materials can significantly improve the antibacterial ability of hydrogels and offer a novel photocatalytic antibacterial mode. In bone repair systems, mesoporous materials remarkably strengthen the mineralization and mechanical properties of hydrogels, aside from being used as drug carriers to load and release various bioactivators to promote osteogenesis. In hemostasis, mesoporous materials greatly elevate the water absorption rate of hydrogels, enhance the mechanical strength of the blood clot, and dramatically shorten the bleeding time. As for wound healing and tissue regeneration, incorporating mesoporous materials can be promising for enhancing vessel formation and cell proliferation of hydrogels. In this paper, we introduce the classification and preparation methods of mesoporous material-loaded composite hydrogels and highlight the applications of composite hydrogels in drug delivery, tumor therapy, antibacterial treatment, osteogenesis, hemostasis, and wound healing. We also summarize the latest research progress and point out future research directions. After searching, no research reporting these contents was found.

Touchable Gustation via a Hoffmeister Gel Iontronic Sensor

A particular sense, touchable gustation, was achieved. We proposed a chemical-mechanical interface strategy with an iontronic sensor device. A conductive hydrogel, amino trimethylene phosphonic acid (ATMP) assisted poly(vinyl alcohol) (PVA), was employed as the dielectric layer of the gel iontronic sensor. The Hofmeister effect of the ATMP-PVA hydrogel was well investigated to establish the quantitative description of the gel elasticity modulus to chemical cosolvents. The mechanical properties of hydrogels can be transduced extensively and reversibly by regulating the aggregation state of polymer chains with hydrated ions or cosolvents. Scanning electron microscopy (SEM) images of ATMP-PVA hydrogel microstructures stained with different soaked cosolvents present different networks. The information on different chemical components will be stored in the ATMP-PVA gels. The flexible gel iontronic sensor with a hierarchical pyramid structure performed high linear sensitivity of 3224.2 kPa-1 and wide pressure response in the range of 0-100 kPa. The finite element analysis proved the pressure distribution at the gel interface of the gel iontronic sensor and the capacitation-stress response relation. Various cations, anions, amino acids, and saccharides can be discriminated, classified, and quantified with the gel iontronic sensor. The Hofmeister effect regulated chemical-mechanical interface performs the response and conversion of biological/chemical signals into electrical output in real time. The particular function to tactile with gustation percept will contribute promising applications in the human-machine interaction, humanoid robot, clinic treatment, or athletic training optimization.

Electrostatic Assembly of Multiarm PEG-Based Hydrogels as Extracellular Matrix Mimics: Cell Response in the Presence and Absence of RGD Cell Adhesive Ligands.

Synthetic hydrogels have been used widely as extracellular matrix (ECM) mimics due to the ability to control and mimic physical and biochemical cues observed in natural ECM proteins such as collagen, laminin, and fibronectin. Most synthetic hydrogels are formed via covalent bonding resulting in slow gelation which is incompatible with drop-on-demand 3D bioprinting of cells and injectable hydrogels for therapeutic delivery. Herein, we developed an electrostatically crosslinked PEG-based hydrogel system for creating high-throughput 3D in vitro models using synthetic hydrogels to mimic the ECM cancer environment. A 3-arm PEG-based polymer backbone was first modified with either permanent cationic charged moieties (2-(methacryloyloxy)ethyl trimethylammonium) or permanent anionic charged moieties (3-sulfopropyl methacrylate potassium salt). The resulting charged polymers can be conjugated further with various amounts of cell adhesive RGD motifs (0, 25, 75, and 98%) to study the influences of RGD motifs on breast cancer (MCF-7) spheroid formation. Formation, stability, and mechanical properties of hydrogels were tested with, and without, RGD to evaluate the cellular response to material parameters in a 3D environment. The hydrogels can be degraded in the presence of salts at room temperature by breaking the interaction of oppositely charged polymer chains. MCF-7 cells could be released with high viability through brief exposure to NaCl solution. Flow cytometry characterization demonstrated that embedded MCF-7 cells proliferate better in a softer (60 Pa) 3D hydrogel environment compared to those that are stiffer (1160 Pa). As the stiffness increases, the RGD motif plays a role in promoting cell proliferation in the stiffer hydrogel. Flow cytometry characterization demonstrated that embedded MCF-7 cells proliferate better in a softer (60 Pa) 3D hydrogel environment compared to those that are stiffer (1160 Pa). As the stiffness increases, the RGD motif plays a role in promoting cell proliferation in the stiffer hydrogel. Additionally, cell viability was not impacted by the tested hydrogel stiffness range between 60 to 1160 Pa. Taken together, this PEG-based tuneable hydrogel system shows great promise as a 3D ECM mimic of cancer extracellular environments with controllable biophysical and biochemical properties. The ease of gelation and dissolution through salt concentration provides a way to quickly harvest cells for further analysis at any given time of interest without compromising cell viability.

Injectable hybrid hydrogels physically crosslinked based on carrageenan and green graphene for tissue repair

Injectable and biocompatible novel hybrid hydrogels based on physically crosslinked natural biopolymers and green graphene for potential use in tissue engineering are reported. Kappa and iota carrageenan, locust bean gum and gelatin are used as biopolymeric matrix. The effect of green graphene content on the swelling behavior, mechanical properties and biocompatibility of the hybrid hydrogels is investigated. The hybrid hydrogels present a porous network with three-dimensionally interconnected microstructures, with lower pore size than that of the hydrogel without graphene. The addition of graphene into the biopolymeric network improves the stability and the mechanical properties of the hydrogels in phosphate buffer saline solution at 37 °C without noticeable change in the injectability. The mechanical properties of the hybrid hydrogels were enhanced by varying the dosage of graphene between 0.025 and 0.075 w/v%. In this range, the hybrid hydrogels preserve their integrity during mechanical test and recover the initial shape after removing the applied stress. Meanwhile, hybrid hydrogels with graphene content of up to 0.05 w/v% exhibit good biocompatibility for 3T3-L1 fibroblasts; the cells proliferate inside the gel structure and show higher spreading after 48 h. These injectable hybrid hydrogels with graphene have promising future as materials for tissue repair.

Chemically Fueled Dissipative Cross-Linking of Protein Hydrogels Mediated by Protein Unfolding.

Cells assemble dynamic protein-based nanostructures far from equilibrium, such as microtubules, in a process referred to as dissipative assembly. Synthetic analogues have utilized chemical fuels and reaction networks to form transient hydrogels and molecular assemblies from small molecule or synthetic polymer building blocks. Here, we demonstrate dissipative cross-linking of transient protein hydrogels using a redox cycle, which exhibit protein unfolding-dependent lifetimes and mechanical properties. Fast oxidation of cysteine groups on bovine serum albumin by hydrogen peroxide, the chemical fuel, formed transient hydrogels with disulfide bond cross-links that degraded over hours by a slow reductive back reaction. Interestingly, despite increased cross-linking, the hydrogel lifetime decreased as a function of increasing denaturant concentration. Experiments showed that the solvent-accessible cysteine concentration increased with increasing denaturant concentration due to unfolding of secondary structures. The increased cysteine concentration consumed more fuel, which led to less direction oxidation of the reducing agent and affected a shorter hydrogel lifetime. Increased hydrogel stiffness, disulfide cross-linking density, and decreased oxidation of redox-sensitive fluorescent probes at a high denaturant concentration provided evidence supporting the unveiling of additional cysteine cross-linking sites and more rapid consumption of hydrogen peroxide at higher denaturant concentrations. Taken together, the results indicate that the protein secondary structure mediated the transient hydrogel lifetime and mechanical properties by mediating the redox reactions, a feature unique to biomacromolecules that exhibit a higher order structure. While prior works have focused on the effects of the fuel concentration on dissipative assembly of non-biological molecules, this work demonstrates that the protein structure, even in nearly fully denatured proteins, can exert similar control over reaction kinetics, lifetime, and resulting mechanical properties of transient hydrogels.

Nanogel-Reinforced Polyacrylamide Hydrogel for Potential Vascular Adhesion

The adhesion and mechanical properties of hydrogels used for vascular wound repair often deteriorate dramatically on wet surfaces, resulting in ineffective repair. In this work, a poly(N-isopropyl acrylamide-co-dopamine methacrylamide) nanogel with dopamine groups was synthesized and introduced into a polyacrylamide (PAAm) hydrogel to produce temperature-responsive hydrogels, which greatly improved mechanical and adhesive properties of PAAm hydrogels. Nanogel-reinforced PAAm (NR-PAAm hydrogel) can adhere to the surface of various solid materials and biological tissues through special physical interactions, which exhibited different mechanical and adhesion properties as temperature changes below or above the lower critical solution temperature (LCST). The maximum adhesion of the NR-PAAm hydrogel on the aluminum surface was 78 kPa. In addition, the NR-PAAm hydrogel exhibited sufficient mechanical properties with a fracture stress of 103.6 kPa at a fracture strain of 1800%. The NR-PAAm hydrogel has good adhesion on wet surfaces and could adhere for 600 s at a pressure difference of 30 mmHg. Hence, the obtained temperature-responsive hydrogels have excellent tunable mechanical properties and adhesion properties, which provides a theoretical basis for the development of vascular repair materials in the future.

A novel strategy to reinforce double network hydrogels with enhanced mechanical strength and swelling ratio by nano cement hydrates

Nano-reinforcement has become a promising strategy to enhance the crosslinking microstructure and mechanical properties of hydrogels. In this study, a new type of nanomaterials from cement hydration, nano-calcium-silicate-hydrate (nano-C-S-H) gels, was for the first time to be adopted to strengthen the double network hydrogels, consisting of N-isopropylacrylamide and sodium acrylate. The experimental results indicated that 10 wt% addition of nano-C-S-H gels contributed to 40% and 157% enhancement in swelling ratio and compressive strength of N-isopropylacrylamide-co-sodium acrylate (Poly(NIPAm-SA)) hydrogels, respectively, which was attributed to the stronger chemical interactions between the nano-C-S-H gels and polymer matrix. Furthermore, 10 wt% addition of nano-C-S-H gels also improved the thermal stability of Poly(NIPAm-SA) hydrogels by 3.7%. In conclusion, the developed nano-C-S-H gels reinforced Poly(NIPAm-SA) hydrogels have great potential to be used as an efficient internal curing agent to develop high-performance concrete.

High-strength, antibacterial, antioxidant, hemostatic, and biocompatible chitin/PEGDE-tannic acid hydrogels for wound healing

Natural polymer hydrogels are widely used in various aspects of biomedical engineering, such as wound repair, owing to their abundance and biosafety. However, the low strength and the lack of function restricted their development and application scope. Herein, we fabricated novel multifunctional chitin/PEGDE-tannic acid (CPT) hydrogels through chemical- and physical-crosslinking strategies, using chitin as the base material, polyethylene glycol diglycidyl ether (PEGDE) and tannic acid (TA) as crosslinking agents, and 90 % ethanol as the regenerative bath. CPT hydrogels maintained a stable three-dimensional porous structure with suitable water contents and excellent biocompatibility. The mechanical properties of hydrogels were greatly improved (tensile stress up to 5.43 ± 1.14 MPa). Moreover, CPT hydrogels had good antibacterial, antioxidant, and hemostatic activities and could substantially promote wound healing in a rat model of full-thickness skin defect by regulating inflammatory responses and promoting collagen deposition and blood vessel formation. Therefore, this work provides a useful strategy to fabricate novel multifunctional CPT hydrogels with excellent mechanical, antibacterial, antioxidant, hemostatic, and biocompatible properties. CPT hydrogels could be promising candidates for wound healing.