Mechanical Properties Of Biological Membranes Research Articles

The membrane transporter lactose permease increases lipid bilayer bending rigidity

Cellular life relies on membranes, which provide a resilient and adaptive cell boundary. Many essential processes depend upon the ease with which the membrane is able to deform and bend, features that can be characterized by the bending rigidity. Quantitative investigations of such mechanical properties of biological membranes have primarily been undertaken in solely lipid bilayers and frequently in the absence of buffers. In contrast, much less is known about the influence of integral membrane proteins on bending rigidity under physiological conditions. We focus on an exemplar member of the ubiquitous major facilitator superfamily of transporters and assess the influence of lactose permease on the bending rigidity of lipid bilayers. Fluctuation analysis of giant unilamellar vesicles (GUVs) is a useful means to measure bending rigidity. We find that using a hydrogel substrate produces GUVs that are well suited to fluctuation analysis. Moreover, the hydrogel method is amenable to both physiological salt concentrations and anionic lipids, which are important to mimic key aspects of the native lactose permease membrane. Varying the fraction of the anionic lipid in the lipid mixture DOPC/DOPE/DOPG allows us to assess the dependence of membrane bending rigidity on the topology and concentration of an integral membrane protein in the lipid bilayer of GUVs. The bending rigidity gradually increases with the incorporation of lactose permease, but there is no further increase with greater amounts of the protein in the membrane.

Changes in lipid membrane mechanics induced by di- and tri-phenyltins

Organotin compounds, being biologically active, affect a variety of cellular functions due to their ability to accumulate in and penetrate biological membranes. These compounds influence the distribution of electrostatic charges, alter organization, disrupt molecular dynamics and change mechanical properties of biological membranes. It was found that the membrane/water partition coefficient equals 4, a value significantly higher than octanol/water partition coefficient. In addition, the effect of di- and tri-phenyltin chlorides on the mechanics of model lipid membranes was measured for the first time. It has been determined that phenyltins affect the global model lipid bilayer properties by reducing the membrane expansion modulus, when measured using micromanipulation technique, and elevating the bending rigidity coefficient of the lipid bilayer, as determined with the flickering noise spectroscopy. In addition, the elevated water permeability shows that phenyltins also cause the local defects formation in the lipid bilayer, i.e. lipid pores. These data shows that phenyltins may interfere indirectly with variety cellular processes by altering non-specifically the entire cellular membrane system. Accordingly, when phenyltins are added to macrophages in culture, they inflict massive alterations of cell morphology and interfere with membrane-associated processes, as visualized using fluorescence labelling of selected subcellular compartments.

Membrane mechanical properties of synthetic asymmetric phospholipid vesicles.

Synthetic lipid vesicles have served as important model systems to study cellular membrane biology. Research has shown that the mechanical properties of bilayer membranes significantly affects their biological behavior. The properties of a lipid bilayer are governed by lipid acyl chain length, headgroup type, and the presence of membrane proteins. However, few studies have explored how membrane architecture, in particular trans-bilayer lipid asymmetry, influences membrane mechanical properties. In this study, we investigated the effects of lipid bilayer architecture (i.e. asymmetry) on the mechanical properties of biological membranes. This was achieved using a customized micropipette aspiration system and a novel microfluidic technique previously developed by our team for building asymmetric phospholipid vesicles with tailored bilayer architecture. We found that the bending modulus and area expansion modulus of the synthetic asymmetric bilayers were up to 50% larger than the values acquired for symmetric bilayers. This was caused by the dissimilar lipid distribution in each leaflet of the bilayer for the asymmetric membrane. To the best of our knowledge, this is the first report on the impact of trans-bilayer asymmetry on the area expansion modulus of synthetic bilayer membranes. Since the mechanical properties of bilayer membranes play an important role in numerous cellular processes, these results have significant implications for membrane biology studies.

The modified fluorescence based vesicle fluctuation spectroscopy technique for determination of lipid bilayer bending properties

Lipid bilayer is the main constitutive element of biological membrane, which confines intracellular space. The mechanical properties of biological membranes may be characterized by various parameters including membrane stiffness or membrane bending rigidity, which can be measured using flicker noise spectroscopy. The flicker noise spectroscopy exploits the spontaneous thermal undulations of the membrane. The method is based on the quantitative analysis of a series of microscopic images captured during thermal membrane fluctuations. Thus, measured bending rigidity coefficient depends on the image quality as well as the selection of computational tools for image processing and mathematical model used. In this work scanning and spinning disc confocal microscopies were used to visualize fluctuating membranes of giant unilamellar vesicles. The bending rigidity coefficient was calculated for different acquisition modes, using different fluorescent probes and different image processing methods. It was shown that both imaging approaches gave similar bending coefficient values regardless of acquisition time. Using the developed methodology the effect of fluorescent probe type and aqueous phase composition on the value of the membrane bending rigidity coefficient was measured. Specifically it was found that the bending rigidity coefficient of DOPC bilayer in water is smaller than that determined for POPC membrane. It has been found that the POPC and DOPC bending rigidities coefficient in sucrose solution was lower than that in water. Fluorescence imaging makes possible the quantitative analysis of membrane mechanical properties of inhomogeneous membrane.

Computation of the effective mechanical response of biological networks accounting for large configuration changes

The asymptotic homogenization technique is involved to derive the effective elastic response of biological membranes viewed as repetitive beam networks. Thereby, a systematic methodology is established, allowing the prediction of the overall mechanical properties of biological membranes in the nonlinear regime, reflecting the influence of the geometrical and mechanical micro-parameters of the network structure on the overall response of the equivalent continuum. Biomembranes networks are classified based on nodal connectivity, so that we analyze in this work 3, 4 and 6-connectivity networks, which are representative of most biological networks. The individual filaments of the network are described as undulated beams prone to entropic elasticity, with tensile moduli determined from their persistence length. The effective micropolar continuum evaluated as a continuum substitute of the biological network has a kinematics reflecting the discrete network deformation modes, involving a nodal displacement and a microrotation. The statics involves the classical Cauchy stress and internal moments encapsulated into couple stresses, which develop internal work in duality to microcurvatures reflecting local network undulations. The relative ratio of the characteristic bending length of the effective micropolar continuum to the unit cell size determines the relevant choice of the equivalent medium. In most cases, the Cauchy continuum is sufficient to model biomembranes. The peptidoglycan network may exhibit a re-entrant hexagonal configuration due to thermal or pressure fluctuations, for which micropolar effects become important. The homogenized responses are in good agreement with FE simulations performed over the whole network. The predictive nature of the employed homogenization technique allows the identification of a strain energy density of a hyperelastic model, for the purpose of performing structural calculations of the shape evolutions of biomembranes.

On the statistical mechanics of shape fluctuations of nearly spherical lipid vesicle

The mechanical properties of biological membranes play an important role in the structure and the functioning of living organisms. One of the most widely used methods for determination of the bending elasticity modulus of the model lipid membranes (simplified models of the biomembranes with similar mechanical properties) is analysis of the shape fluctuations of the nearly spherical lipid vesicles. A theoretical basis of such an analysis is developed by Milner and Safran. In the present studies we analyze their results using an approach based on the Bogoljubov inequalities and the approximating Hamiltonian method. This approach is in accordance with the principles of statistical mechanics and is free of contradictions. Our considerations validate the results of Milner and Safran if the stretching elasticity Ks of the membrane tends to zero.

Engineering de Novo Membrane-Mediated Protein–Protein Communication Networks

Mechanical properties of biological membranes are known to regulate membrane protein function. Despite this, current models of protein communication typically feature only direct protein-protein or protein-small molecule interactions. Here we show for the first time that, by harnessing nanoscale mechanical energy within biological membranes, it is possible to promote controlled communication between proteins. By coupling lipid-protein modules and matching their response to the mechanical properties of the membrane, we have shown that the action of phospholipase A(2) on acyl-based phospholipids triggers the opening of the mechanosensitive channel, MscL, by generating membrane asymmetry. Our findings confirm that the global physical properties of biological membranes can act as information pathways between proteins, a novel mechanism of membrane-mediated protein-protein communication that has important implications for (i) the underlying structure of signaling pathways, (ii) our understanding of in vivo communication networks, and (iii) the generation of building blocks for artificial protein networks.

AFM Determination of the Elasticity of Model Biomembranes

The utility of AFM (Atomic Force Microscopy) to study surface morphologies and molecular level forces is well known. It is also possible to apply well-defined small forces on soft surfaces using the AFM. The latter is being used here to determine the elasticity (Young's modulus) of model membrane lipid bilayers. The mechanical properties of biological membranes are of interest in understanding various biologically related processes like cell hemolysis, viral fusion and pore formation, etc. and are closely related to the cell stability. The method involves determination of the force curves by compressing the lipid bilayer by indenting the AFM tip on the bilayer surface, and the resulting elastic response of the bilayer to the applied force (load) is analysed using theoretical models for the tip geometry. We will discuss the sample preparation technique and the results of our experiments on coexisting fluid-phase domains in typical ‘lipid raft’ mixtures, as well as the effects of varying the level of unsaturation of the lipid carbon chains.

Equivalent mechanical properties of biological membranes from lattice homogenization

The goal of this manuscript is to set up a novel methodology for the calculation of the effective mechanical properties of biological membranes viewed as repetitive networks of elastic filaments, based on the discrete asymptotic homogenization method. We will show that for some lattice configurations, flexional effects due to internal structure mechanisms at the unit cell scale lead to additional flexional effects at the continuum scale, accounted for by an internal length associated to a micropolar behavior. Thereby, a systematic methodology is established, allowing the prediction of the overall mechanical properties of biological membranes for a given network topology, as closed form expressions of the geometrical and mechanical micro-parameters. The peptidoglycan and the erythrocyte have been analyzed using this methodology, and their effective moduli are calculated and recorded versus the geometrical and mechanical lattice parameters. A classification of lattices with respect to the choice of the equivalent continuum model is proposed: The Cauchy continuum and a micropolar continuum are adopted as two possible effective medium, for a given beam model. The relative ratio of the characteristic length of the micropolar continuum to the unit cell size determines the relevant choice of the equivalent medium. In most cases, the Cauchy continuum is sufficient to model membranes in most of their configurations. The peptidoglycan network may exhibit a re-entrant hexagonal lattice, for which micropolar effects become important. This is attested by the characteristic length becoming larger than the beam length for such configurations. The homogenized moduli give accurate results for both membranes, as revealed by comparison with experimental measurements or simulation results from the literature at the network scale. A first insight into the nonlinear mechanical behavior of the hexagonal and triangular networks is lastly investigated using a perturbative method.

What do we really measure in AFM punch-through experiments on supported lipid bilayers?

Nowadays, there is much experimental evidence that the mechanical properties of biological membranes affect membrane protein functions. A very convenient technique to study these properties on a spatial scale relevant to that of single proteins is represented by Atomic Force Spectroscopy (AFS). In this study we measured the force the AFM tip has to apply on a supported lipid bilayer to punch-through it as a function of different environmental parameters. We observed that this force is reduced when the lipid bilayer is in its phase transition region. We interpreted our results on the basis of thermodynamical considerations and we stressed their biological relevance. In particular, the reduced punch-through force in the phase transition region could be relevant for the function of membrane proteins which operates by conformational changes at the protein/lipid interface. We also suggest that the presence of a transmembrane voltage drop can affect the measured punch-through force.

Physicochemical and Biological Characterization of Monoketocholic Acid, a Novel Permeability Enhancer

Bile salts are endogenous surfactants which have been widely used in drug formulation and drug delivery systems to increase drug permeation. When given by subcutaneous injection to rats, the novel bile salt, monoketocholate (MKC) has been shown to increase brain uptake of several drugs. This study aimed to characterize the physicochemical and some biological properties of MKC as a basis for understanding the mechanism by which it enhances membrane permeability. Comparison was made with three natural bile salts, cholate, deoxycholate and taurocholate. Critical micelle concentrations (CMC) were measured by the surface tension method and partition coefficients in n-octanol/buffer were measured by liquid-liquid extraction. The effects of bile salts on three different biological membrane models were investigated. Penetration studies in Langmuir monolayers indicated that MKC has only a weak ability to insert into phospholipid monolayers, but it can increase their elasticity once incorporated. In the erythrocyte model, MKC did not cause hemolysis at concentrations up to 10 mM, but changed the deformability of erythrocytes. Studies of the permeability of mannitol and transepithelial electrical resistance (TEER) across Caco-2 cell monolayers showed MKC did not cause significant increases in mannitol permeability or decreases in TEER values. In conclusion, MKC does not display strong membrane-solubilizing properties, but does change the mechanical properties of biological membranes. This effect might influence both passive and active transcellular permeation.

Thin films in biosensors

Thin films are used in every domain of biosensor systems as for sample handling, biological recognition and amplification, transduction and electronic signal processing. Several planar microelectrochemical chips with thin-film electrodes of different shapes and arrangements on Si or glass substrates have been developed and utilized in voltammetric and potentiometric sensors. Bilayer lipid membranes (BLMs) are very ‘‘adaptive’’ thin-film materials applicable in biosensors. Forming of BLMs on planar chip with thin-film electrodes has opened up new possibilities for the development of miniaturized biosensors as well as for basic research on electrical and mechanical properties of biological membranes.

Lysophospholipids modulate channel function by altering the mechanical properties of lipid bilayers.

Lipid metabolites, free fatty acids and lysophospholipids, modify the function of membrane proteins including ion channels. Such alterations can occur through signal transduction pathways, but may also result from "direct" effects of the metabolite on the protein. To investigate possible mechanisms for such direct effects, we examined the alterations of gramicidin channel function by lysophospholipids (LPLs): lysophosphatidylcholine (LPC), lysophosphatidylethanolamine (LPE), lysophosphatidylserine (LPS), and lysophosphatidylinositol (LPI). The experiments were done on planar bilayers formed by diphytanoylphosphatidylcholine in n-decane a system where receptor-mediated effects can be excluded. At aqueous concentrations below the critical micelle concentration (CMC), LPLs can increase the dimerization constant for membrane-bound gramicidin up to 500-fold (at 2 microM). The relative potency increases as a function of the size of the polar head group, but does not seem to vary as a function of head group charge. The increased dimerization constant results primarily from an increase in the rate constant for channel formation, which can increase more than 100-fold (in the presence of LPC and LPI), whereas the channel dissociation rate constant decreases only about fivefold. The LPL effect cannot be ascribed to an increased membrane fluidity, which would give rise to an increased channel dissociation rate constant. The ability of LPC to decrease the channel dissociation rate constant varies as a function of channel length (which is always less than the membrane's equilibrium thickness): as the channel length is decreased, the potency of LPC is increased. LPC has no effect on membrane thickness or the surface tension of monolayers at the air/electrolyte interface. The bilayer-forming glycerolmonooleate does not decrease the channel dissociation rate constant. These results show that LPLs alter gramicidin channel function by altering the membrane deformation energy, and that the changes in deformation energy can be related to the molecular "shape" of the membrane-modifying compounds. Similar alterations in the mechanical properties of biological membranes may form a general mechanism by which one can alter membrane protein function.

Organization and interaction of cholesterol and phosphatidylcholine in model bilayer membranes

The molecular organization of sterols in liposomes of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) at 37 degrees C is examined by utilizing the fluorescent analogue of cholesterol cholesta-5,7,9-trien-3 beta-ol (cholestatrienol). (1) Cholestatrienol is shown to be indistinguishable from native cholesterol in terms of its ability to condense POPC, as determined by (i) pressure/area studies of mixed-lipid monolayers and (ii) its ability to increase the order of POPC bilayers (determined by electron spin resonance studies) whether on its own or admixed with cholesterol at various ratios. (2) By analysis of the perturbation of the absorption spectra, cholestatrienol was found to be freely miscible in aggregates of cholesterol in buffer. In contrast, a lack of any detectable direct interaction of the sterol molecules in POPC bilayers was detected. (3) Fluorescence intensity and lifetime measurements of POPC/sterol (1:1 mol/mol) at various cholesterol/cholestratrienol molar ratios (0.5:1 up to 1:1 cholestatrienol/POPC) confirmed that sterol molecules in the membrane matrix were not associated to any great degree. (4) A quantitative estimate of how close sterol molecules approach each other in the membrane matrix was evaluated from the concentration dependence of the steady-state depolarization of fluorescence and was found to be 10.6 A. From geometrical considerations, the sterol/phospholipid phase at 1:1 mol/mol is depicted as each sterol having four POPC molecules as nearest neighbors. We term this arrangement of the lipid matrix an "ordered bimolecular mesomorphic lattice". (5) The concentration dependence of depolarization of fluorescence of cholestatrienol in POPC liposomes in the absence of cholesterol yielded results that were consistent with the cholestatrienol molecules being homogeneously dispersed throughout the phospholipid phase at sterol/POPC ratios of less than 1:1. (6) From qualitative calculations of the van der Walls' hydrophobic interactions of the lipid species, the phospholipid condensing effect of cholesterol is postulated to arise from increased interpenetration of the flexible methylene segments of the acyl chains, as a direct result of their greater mutual attraction compared to their attraction for neighboring sterol molecules. (7) The interdependence of the ordered bimolecular mesomorphic lattice and the acyl chain condensation is discussed in an effort to understand the ability of cholesterol to modulate the physical and mechanical properties of biological membranes.