Mechanical Function Research Articles

De novo assembly of Idesia polycarpa transcriptome and unsaturated fatty acid biosynthesis candidate genes Mining and functional Identification

Unsaturated fatty acids (UFA) in lipids are the key to nutraceutical oil applications, with various potential applications in nutraceutical functional foods and pharmaceutical industries. In Idesia polycarpa (Salicaceae), more than 80 % of UFA have been found in the fruits; yet, the underlying genetic mechanism remains poorly understood. Due to the lack of theoretical research on the genes related to lipid biosynthesis and the complete genetic transformation system of I. polycarpa fruit, the selection and breeding of I. polycarpa, an excellent oil tree, has been severely restricted. In-depth understanding of the molecular mechanism and gene function of lipid biosynthesis of I. polycarpa fruit is therefore of great significance for the development of I. polycarpa resources. This is not only conducive to the genetic improvement of I. polycarpa by molecular breeding technologies but can also provide a reference for the study of the gene functions of other oil plants. In this study, the FA accumulation patterns of I. polycarpa fruits during 8 growth periods were analysed. Fruit from two developmental periods with different UFA levels were analysed for RNA sequencing by an Illumina NovaSeq 6000 HiSeq platform. De novo transcriptome assembly presented 115,350 unigenes and 4382 differentially expressed genes (DEGs). Functional annotation in the KEGG pathway and combined with DEG data revealed candidate genes potentially involved in UFA biosynthesis. Expression analysis of q-PCR of IpDGAT2, IpGPAT, IpKASII, IpSAD, IpFAD2, IpFAD3 and IpFAD8 suggested that these genes are highly involved in UFA biosynthesis. Full-length candidate genes were cloned and analysed by bioinformatic tools, and function analysis of IpSAD and IpFAD3 showed that these genes regulated the products of linoleic acid metabolism. This study provides a foundation for UFA biosynthesis in Idesia polycarpa, facilitating its genetic breeding in the future.

Porous structural battery composite for coordinated integration of mechanical and electrical functionalities

AbstractStructural battery composites (SBCs) represent an emerging multifunctional technology in which materials functionalized with energy storage capabilities are used to build load‐bearing structural components. However, due to the liquid electrolyte contamination in structural battery electrolyte (SBE) and the large volume expansion of active battery materials, the poor interlayer interfacial in multilayer SBCs often causes difficulties in practical use. In this study, a new porous LiFePO4‐graphite SBC is designed and fabricated by independently distributing battery materials and resin matrix on carbon fiber fabric in pattern lattice form to prepare electrodes prepreg. The cured porous composite framework supports the load‐bearing function while limiting the electrochemical reaction in liquid electrolyte within lattices. The electrodes show reversible electric resistance after 3000 bending cycles with radius as small as 10 mm. The mechanical properties enhance significantly with tensile strength of 486.1 MPa and Young's modulus of 9.1 GPa compared to that with a liquid–solid biphasic mixed SBE structure. The SBC also exhibits a favorable capacity of 27.8 mAh/g at 0.1C. This straightforward integration path of mechanical and electrical functionalities is compatible with the manufacturing process of aerospace composite structures, which will provide an efficient and convenient energy supply solution for distributed electronics.Highlights A porous full‐cell structural battery composite (SBC) was designed and fabricated with prepregs. A suspension deposition and volatilization method was developed for robust battery material coating. Electrodes layer exhibited reversible electric resistance after 3000 tensile/bending cycles. The tensile strength and modulus increased significantly compared to the SBC with liquid–solid biphasic mixed structural battery electrolyte. Coordinated integration path was completely compatible with the manufacturing process of aerospace composite structures.

Evaluation of Left Atrial Electromechanical Delay and Left Atrial Phasic Functions in Patients Undergoing Treatment with Cardiotoxic Chemotherapeutic Agents.

Background: The aim of this study is to evaluate atrial involvement by comparing pre- and post-chemotherapy left atrial mechanical and electromechanical parameters in patients treated with cardiotoxic chemotherapeutic agents. Methods: We designed our study as a prospective cohort study. Sixty-eight female patients between the ages of 18 and 50, scheduled for treatment with cardiotoxic chemotherapeutic agents, were included in our study. Atrial mechanical functions and electromechanical parameters were examined and compared with basic echocardiographic parameters before and after chemotherapy. Results: The mean age of the patients was 41.6 ± 7.9 years. After chemotherapy, lateral PA, septal PA, and tricuspid PA durations showed a significant increase (p < 0.001), but there were no statistically significant changes in the left intra-atrial electromechanical delay, the right intra-atrial electromechanical delay, or the interatrial electromechanical delay values. Following treatment, LAVmax, LAVmin, and LApreA significantly increased (p < 0.001). Additionally, the left atrial passive and active emptying volumes increased (p < 0.001), while the reservoir and pump (active emptying) functions decreased (with p-values of 0.03 and 0.01, respectively). The passive emptying function, however, showed no significant change (p = 0.65). Decreases in LVEF were observed, while LVEDD, LVESD, IVS, PW, and LA diameters increased (p-value of 0.02 for IVS and <0.001 for the others). Conclusions: Significant impairment of atrial mechanical functions and electromechanical parameters was observed after treatment with cardiotoxic chemotherapeutic agents. This suggests an elevated likelihood of atrial arrhythmia linked to the use of cardiotoxic chemotherapeutic agents.

Thrombosis of the superior vena cava in a patient with an implanted cardioverter–defibrillator: A case report

BACKGROUND: Superior vena cava syndrome results from the occlusion of blood flow in the superior vena cava due to external compression, internal obstruction, or infiltration of the vessel wall by a tumor. Although thrombotic complications caused by electrodes of cardiac implantable devices are uncommon in clinical practice, their incidence has been increasing due to the increasing need for such devices, which effectively correct the compromised electrical or mechanical functions of the heart chambers. CLINICAL CASE DESCRIPTION: Herein, we have presented a case of superior vena cava thrombosis syndrome in a patient who had undergone cardioverter–defibrillator implantation for dilated cardiomyopathy. We have discussed the classification of superior vena cava syndromes, its pathogenesis, and the types of collateral circulation. CONCLUSION: As observed in our patient, the concurrent presence of chronic heart failure syndrome can make it challenging to recognize superior vena cava syndrome in the early stages of diagnosis.

Non-autophagic Golgi-LC3 lipidation facilitates TFE3 stress response against Golgi dysfunction

Lipidated ATG8/LC3 proteins are recruited to single membrane compartments as well as autophagosomes, supporting their functions. Although recent studies have shown that Golgi-LC3 lipidation follows Golgi damage, its molecular mechanism and function under Golgi stress remain unknown. Here, by combining DLK1 overexpression as a new strategy for induction of Golgi-specific LC3 lipidation, and the application of Golgi-damaging reagents, we unravel the mechanism and role of Golgi-LC3 lipidation. Upon DLK1 overexpression, LC3 is lipidated on the Golgi apparatus in an ATG12-ATG5-ATG16L1 complex-dependent manner; a post-Golgi trafficking blockade is the primary cause of this lipidation. During Golgi stress, ATG16L1 is recruited through its interaction with V-ATPase for Golgi-LC3 lipidation. After post-Golgi trafficking inhibition, TFE3, a key regulator of the Golgi stress response, is translocated to the nucleus. Defects in LC3 lipidation disrupt this translocation, leading to an attenuation of the Golgi stress response. Together, our results reveal the mechanism and unexplored function of Golgi-LC3 lipidation in the Golgi stress response.

Nanoparticle Decorated Cellulose Nanocrystals (CNC) Composites for Energy, Catalysis, and Biomedical Applications

AbstractDecorating cellulose nanocrystals(CNC) with nanoparticles(NPs) allows to engineer novel CNC/NPs composites for advanced technologies and applications. NPs are well‐known for their unique and highly efficient properties. However, NPs present challenges and limitations due to their aggregation, non‐uniform growth, size distribution, and nanotoxicity. CNC surface overcomes most of these drawbacks by providing an attractive matrix/template to grow NPs of desirable morphology, distribution, and functionality. CNC has distinctive properties such as biodegradability, high surface area, low cost, good mechanical strength, surface functionality, and chiral nematic self‐assembly. CNC/NPs composites combine the unique properties of both CNC and NPs. This review highlights the unique characteristics of CNC, NPs, and their composites for energy, catalysis, and biomedical applications. First, different production methods for CNC with their effect on morphology, crystallinity index, and yield are presented. Both organic and inorganic NPs are used to decorate either a pristine or a functionalized CNC surface. In situ nucleation and growth methods are compared with the direct incorporation of pre‐formed NPs on the CNC surface. Applications of CNC/NPs composites are reviewed for energy storage material, conductive materials, catalysts, antibacterial agents, biosensors, and bioimaging. Finally, the current challenges and perspectives are presented for unleashing new possibilities in developing functional CNC‐NPs composites.

Functioning of unidirectional ventilation in flying hawkmoths evaluated by pressure and oxygen measurements and X-ray video and tomography.

Flying sphingids generate unidirectional ventilation with an inflow through the anterior thoracic spiracles and an outflow through the posterior thoracic spiracles. This phenomenon was documented by the CO2 emission and tracheal air pressure in split-chamber experiments in preceding studies. In the present study, we evaluated the function of the air pump mechanism by measuring the tracheal pressure and PO2in the air sacs and monitoring the wing beat using photocells. Microelectrodes recorded the abdomen flexing muscles and abdominal transverse muscle septum. The crucial structure was the vertical mesophragma, with longitudinal flight muscles attached anteriorly and large fused metathoracic air sacs posteriorly, continuous to the first abdominal segment. Longitudinal flight muscles and abdomen lifting muscles contracted synchronously, producing positive pressure pulses within the mesothoracic air sacs. In the scutellar air sacs, the PO2with starting full flight was elevated to 18-20 kPa, with a pressure increase of 35-50 Pa. In contrast, in the metathoracic air sacs, the O2 concentration during flight could rise to 10 kPa, then decline to 5±1 kPa. The metathoracic air sacs provided compliance for ventilation by the flight muscles. The initial rise and subsequent decrease of the PO2in these posterior metathoracic air sacs indicated the unidirectional flow path of the air used. Serial X-ray frames of flying Acherontia atropos visualised the cyclic phragma movement and volume changes in the metathoracic air sacs. The results showed that the contracting dorsolongitudinal flight muscles expanded the metathoracic air sacs, acting as a suction pump.

Analysis of the Challenges and Dilemmas in the Categorization of Economic, Social and Cultural Rights

This paper discusses the limitations associated with the basic classification of human rights into several categories. The topic of whether international trends have an impact on the State's view of the significance of implementing rights through the acceptance of individual complaint procedures is a complex one. Starting with an acknowledgment of the infinite extent of the issue, this paper displays a belief in the fallacious conceptions of differences in human rights. It investigates and assesses the institutional contribution to the advancement of human rights through a chronological analysis of historical processes that give rise to changes in the 20th century. To address this particular distinction, this paper looks to the 1993 Vienna Declaration and Program of Action and the new Optional Protocol for validation and endorsement. By highlighting many similarities in the language and nature of State responsibilities, it challenges the reader to consider whether non-justiciability provides a basis in the first place. The purpose of this paper is to investigate the function of dispute resolution mechanisms during the implementation phase. From a practical standpoint, it compels the reader to contemplate if the committee procedures outlined in international conventions serve just as symbolic representations of non-cooperation by States or are put into effect. This paper ultimately presents the reader with some thought-provoking material in the shape of the dichotomy between enforcement and justiciability.

Evaluation of antibacterial activity on nanoline-array surfaces with different spacing

Extensive research has been conducted on anti-biofouling or antibacterial surfaces, with nanostructured surfaces that mimic cicada and dragonfly wings emerging as promising candidates for mechano-bactericidal applications. These biomimetic nanostructured surfaces are capable of exerting a bactericidal effect by directly damaging the membranes of bacteria attached to nanostructures. Although research on bactericidal effect using various nanostructures have been conducted, no specific studies have yet reported on the antibacterial efficiency of the surface having nanoline array, especially regarding the spacing between nanolines. This study details the fabrication of nanoline array via ultraviolet (UV) molding with polyurethane acrylate (PUA), noted for its UV sensitivity and rapid curing, enabling the fabrication of precise and scalable nanoscale structures. Investigation into the nanoline array’s antibacterial effects against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) reveals that nanoline spacing critically influences bacterial adherence and viability, with specific spacings enhancing antibacterial properties. Scanning electron microscopy (SEM) and confocal microscopy analyses show that surface topography significantly affects bacterial behavior, with specific spacings leading to varied bacterial responses, including membrane damage and altered attachment patterns. The study highlights the potential of nanoline array in fabricating surfaces with tailored antibacterial properties, emphasizing the importance of nanoscale design in influencing bacterial interaction and viability. We also confirm the relative mechanical rigidity of the nanoline array, which exhibits antibacterial effects, through both experimental observations and numerical analysis. This indicates our proposed nanoline-array surface could have potential future applications in mechanical anti-bacterial functions that require such structural robustness.

EF yolov8s: A Human–Computer Collaborative Sugarcane Disease Detection Model in Complex Environment

The precise identification of disease traits in the complex sugarcane planting environment not only effectively prevents the spread and outbreak of common diseases but also allows for the real-time monitoring of nutrient deficiency syndrome at the top of sugarcane, facilitating the supplementation of relevant nutrients to ensure sugarcane quality and yield. This paper proposes a human–machine collaborative sugarcane disease detection method in complex environments. Initially, data on five common sugarcane diseases—brown stripe, rust, ring spot, brown spot, and red rot—as well as two nutrient deficiency conditions—sulfur deficiency and phosphorus deficiency—were collected, totaling 11,364 images and 10 high-definition videos captured by a 4K drone. The data sets were augmented threefold using techniques such as flipping and gamma adjustment to construct a disease data set. Building upon the YOLOv8 framework, the EMA attention mechanism and Focal loss function were added to optimize the model, addressing the complex backgrounds and imbalanced positive and negative samples present in the sugarcane data set. Disease detection models EF-yolov8s, EF-yolov8m, EF-yolov8n, EF-yolov7, and EF-yolov5n were constructed and compared. Subsequently, five basic instance segmentation models of YOLOv8 were used for comparative analysis, validated using nutrient deficiency condition videos, and a human–machine integrated detection model for nutrient deficiency symptoms at the top of sugarcane was constructed. The experimental results demonstrate that our improved EF-yolov8s model outperforms other models, achieving mAP_0.5, precision, recall, and F1 scores of 89.70%, 88.70%, 86.00%, and 88.00%, respectively, highlighting the effectiveness of EF-yolov8s for sugarcane disease detection. Additionally, yolov8s-seg achieves an average precision of 80.30% with a smaller number of parameters, outperforming other models by 5.2%, 1.9%, 2.02%, and 0.92% in terms of mAP_0.5, respectively, effectively detecting nutrient deficiency symptoms and addressing the challenges of sugarcane growth monitoring and disease detection in complex environments using computer vision technology.

Preparation of antibacterial composite film based on arginine-modified chitosan and its application in the preservation of ready-to-eat sea cucumber

An edible composite film was developed and applied for ready-to-eat sea cucumber storage to improve the product quality. The PAC film base is first prepared by mixing 0.5 % glycerin (GL) with 4 % polyvinyl alcohol (PVA) and 1 % arginine-modified chitosan (Arg-CTS) in the same volume. After the addition of nano-ZnO (ZnO) and thymol (Thy) to the PAC film base, the mechanical properties and functions were tested. Compared to the PAC film, the PAC-ZnO-ThyH composite film showed a 1.34-fold increase in the DPPH scavenging rate and a 2.19-fold increase in the ABTS scavenging rate. Contrary to the PAC film, the inhibition zone diameter of Escherichia coli and Staphylococcus aureus significantly increased by 2.35 and 4.08 folds in the PAC-Zno-ThyH film, respectively. After applying the PAC-ZnO-ThyH film to store ready-to-eat sea cucumber for 10 days, there was a significant reduction in weight loss, total volatile basic nitrogen (TVB-N), and lipid oxidation levels to 1.47 and 1.26 folds to the Ctrl group. After preservation, the hardness and chewiness of ready-to-eat sea cucumber were maintained at 1079.62 ± 138.86 N and 913.73 ± 175.79 N, respectively. The novel PAC-ZnO-ThyH composite film can be used as an active food packaging for promising seafood applications.

Upregulated expression of ubiquitin ligase TRIM21 promotes PKM2 nuclear translocation and astrocyte activation in experimental autoimmune encephalomyelitis.

Reactive astrocytes play critical roles in the occurrence of various neurological diseases such as multiple sclerosis. Activation of astrocytes is often accompanied by a glycolysis-dominant metabolic switch. However, the role and molecular mechanism of metabolic reprogramming in activation of astrocytes have not been clarified. Here, we found that PKM2, a rate-limiting enzyme of glycolysis, displayed nuclear translocation in astrocytes of EAE (experimental autoimmune encephalomyelitis) mice, an animal model of multiple sclerosis. Prevention of PKM2 nuclear import by DASA-58 significantly reduced the activation of mice primary astrocytes, which was observed by decreased proliferation, glycolysis and secretion of inflammatory cytokines. Most importantly, we identified the ubiquitination-mediated regulation of PKM2 nuclear import by ubiquitin ligase TRIM21. TRIM21 interacted with PKM2, promoted its nuclear translocation and stimulated its nuclear activity to phosphorylate STAT3, NF-κB and interact with c-myc. Further single-cell RNA sequencing and immunofluorescence staining demonstrated that TRIM21 expression was upregulated in astrocytes of EAE. TRIM21 overexpressing in mice primary astrocytes enhanced PKM2-dependent glycolysis and proliferation, which could be reversed by DASA-58. Moreover, intracerebroventricular injection of a lentiviral vector to knockdown TRIM21 in astrocytes or intraperitoneal injection of TEPP-46, which inhibit the nuclear translocation of PKM2, effectively decreased disease severity, CNS inflammation and demyelination in EAE. Collectively, our study provides novel insights into the pathological function of nuclear glycolytic enzyme PKM2 and ubiquitination-mediated regulatory mechanism that are involved in astrocyte activation. Targeting this axis may be a potential therapeutic strategy for the treatment of astrocyte-involved neurological disease.

“AI at Elsinore: What Horatio can teach us about Artificial Intelligence”

This paper argues that the early modern period was already debating questions about the interstices and transitions between humans and machines, much like the ones that govern our engagements with AI today. Looking at Shakespeare’s Hamlet, I will be showing that, next to the ghost, Horatio is another and arguably no less challenging uncanny character on the battlements at Elsinore. While the ghost is situated between the full humanity of a living human being and the inanimate materiality of a dead corpse, Horatio seems to be situated between the full humanity of being “passion’s slave” and the mechanical functioning of a time-keeping and recording device. Horatio, then, is an experiment in artificial intelligence avant la lettre. This paper shows how his reduced, partial, and artificial humanity is explored by the play as it exposes Horatio’s inadequacies.

Strong and Tough Multilayer Heterogeneous Pyrocarbon Based Composites

AbstractThe integration of bio‐inspired hierarchical design into synthetic carbon materials holds promise for developing lightweight, high‐performance structural materials. Hierarchical and heterogeneous nanoscale units are crucial to load bearing and mechanical functionality yet receives limited attention for difficulties in accurate regulation. Herein, one kind of multilayered heterogeneous have proposed pyrocarbon based composite constructed through chemical vapor deposition method with nanoscale graphene orderliness regulation. Sequential construction from orientational graphene sheets to nondirective isotropic networks is achieved through controlling the size and morphology of pyrolysis intermediates with moderate oxidation, being expected to facilitate load transfer and structural stability through dynamically adjustment in heterogeneous interfacial sliding. The resulting multilayer heterogeneous phases exhibit impressive strengthening and toughening mechanisms dominated by microstructural multiscale coupling, which provides new solutions for developing structural composites for high‐temperature aerospace applications. Additionally, the multiple internal reflections arising from the abundant heterogeneous interfaces significantly improve the efficiency of electromagnetic microwave absorption. The multilayered heterogeneous interfaces achieved through orderliness manipulation offer novel insights into the assembly of mechanical functionality integration for wide‐temperature applications and high‐performance macroscopic carbon‐based composites.

Statistical physical view of statistical inference in Bayesian linear regression model.

This paper considers similarities between statistical physics and Bayes inference through the Bayesian linear regression model. Some similarities have been discussed previously, such as the analogy between the marginal likelihood in Bayes inference and the partition function in statistical mechanics. In particular, this paper considers the proposal to associate discrete sample size with inverse temperature [C. H. LaMont and P. A. Wiggins, Phys. Rev. E 99, 052140 (2019)2470-004510.1103/PhysRevE.99.052140]. The previous study suggested that incorporating this similarity motivates the derivation of analogs of thermodynamic functions such as energy and entropy. The study also anticipated that those analogous functions have potential to describe Bayes estimation from physical points of view and to provide physical insights into mechanisms of estimation. This paper incorporates a macroscopic perspective as an asymptotics similar to the thermodynamic limit into the previous suggestion. Its motivation stems from the statistical mechanical concept of deriving thermodynamic functions that characterize macroscopic properties of macroscopic systems. This incorporation not only allows analogs of macroscopic thermodynamic functions to be considered but also suggests a candidate for an analog of inverse temperature with continuity, which is partly consistent with the previous proposal to associate the discrete sample size with inverse temperature. On the basis of this suggestion, we analyze analogs of macroscopic thermodynamic functions for a Bayesian linear regression model which is the basis of various machine learning models. We further investigate, through the behavior of these functions, how Bayes estimation is described from the perspective of physics and what kind of physical insight is obtained. As a result, the estimation of regression coefficients, which is the primary task of regression, appears to be described by the physical picture of balance between decreasing energy and increasing entropy as in equilibrium states of thermodynamic systems. More specifically we observe the physical view of Bayes inference as follows: the estimation succeeds where the effect of decreasing energy is dominant at low temperature. On the other hand, the estimation fails where the effect of increasing entropy is dominant at high temperature.

Evaluation and design of a bite force measuring load cell

The measurement of bite force can be essential for assessing oral health and the functioning of the stomatognathic system. However, its use in dental offices is limited due to operational complexities and costs. This study focused on evaluating the mechanical strength of the user-friendly and low manufacturing cost load cell under development within LABBIO – Bioengineering Laboratory at UFMG, the gnathodynamometer, tailored for children. 3D modeling in SolidWorks and Finite Element Method (FEM) structural analysis were employed to ensure its ability to withstand the desired 1000 N load. Initially, the device did not meet the desired load, resulting in iterations to modify its geometry. After iterations including the replacement of the initial material with a more suitable alternative, removal of edges, and other adjustments, a final prototype meeting mechanical strength and functionality requirements was developed.

Thermal Metamaterials with Configurable Mechanical Properties.

Thermal metamaterials are typically achieved by mixing different natural materials to realize effective thermal conductivities (ETCs) that conventional materials do not possess. However, the necessity for multifunctional design of metamaterials, encompassing both thermal and mechanical functionalities, is somewhat overlooked, resulting in the fixation of mechanical properties in thermal metamaterials designed within current research endeavors. Thus far, conventional methods have faced challenges in designing thermal metamaterials with configurable mechanical properties because of intricate inherent relationships among the structural configuration, thermal and mechanical properties in metamaterials. Here, a data-driven approach is proposed to design a thermal metamaterial capable of seamlessly achieving thermal functionalities and harnessing the advantages of microstructural diversity to configure its mechanical properties. The designed metamaterial possesses thermal cloaking functionality while exhibiting exceptional mechanical properties, such as load-bearing capacity, shearing strength, and tensile resistance, thereby affording mechanical protection for the thermal metadevice. The proposed approach can generate numerous distinct inverse design candidate topological functional cells (TFCs), designing thermal metamaterials with dramatic improvements in mechanical properties compared to traditional ones, which sets up a novel paradigm for discovering thermal metamaterials with extraordinary mechanical structures. Furthermore, this approach also paves the way for investigating thermal metamaterials with additional physical properties.

Characterization of pediatric porcine pulmonary valves as a model for tissue engineered heart valves

Heart valve tissue engineering holds the potential to transform the surgical management of congenital heart defects affecting the pediatric pulmonary valve (PV) by offering a viable valve replacement. While aiming to recapitulate the native valve, the minimum requirement for tissue engineered heart valves (TEHVs) has historically been adequate mechanical function at implantation. However, long-term in situ functionality of TEHVs remains elusive, suggesting that a closer approximation of the native valve is required. The realization of biomimetic engineered pediatric PV is impeded by insufficient characterization of healthy pediatric tissue. In this study, we comprehensively characterized the planar biaxial tensile behaviour, extracellular matrix (ECM) composition and organization, and valvular interstitial cell (VIC) phenotypes of PVs from piglets to provide benchmarks for TEHVs. The piglet PV possessed an anisotropic and non-linear tension-strain profile from which material constants for a predictive constitutive model were derived. The ECM of the piglet PV possessed a trilayer organization populated by collagen, glycosaminoglycans, and elastin. Biochemical quantification of ECM content normalized to wet weight and DNA content of PV tissue revealed homogeneous distribution across sampled regions of the leaflet. Finally, VICs in the piglet PV were primarily quiescent vimentin-expressing fibroblasts, with a small proportion of activated α-smooth muscle actin-expressing myofibroblasts. Overall, piglet PV properties were consistent with those reported anecdotally for pediatric human PVs and distinct from those of adult porcine and human PVs, supporting the utility of the properties determined here to inform the design of tissue engineered pediatric PVs. Statement of significanceHeart valve tissue engineering has the potential to transform treatment for children born with defective pulmonary valves by providing living replacement tissue that can grow with the child. The design of tissue engineered heart valves is best informed by native valve properties, but native pediatric pulmonary valves have not been fully described to date. Here, we provide comprehensive characterization of the planar biaxial tensile behaviour, extracellular matrix composition and organization, and valvular interstitial cell phenotypes of pulmonary valves from piglets as a model for the native human pediatric valve. Together, these findings provide standards that inform engineered heart valve design towards generation of biomimetic pediatric pulmonary valves.

Multifunctional seamless meta-sandwich composite as lightweight, load-bearing, and broadband-electromagnetic-wave-absorbing structure

Engineered porous geometries composed of low-density lossy materials are promising as broadband absorbers due to their tunable structural attenuation that can selectively manipulate electromagnetic (EM) waves. However, the exposed cellular architectures require mechanical reinforcement and additional packaging. Here, we present a multifunctional meta-sandwich structure as one seamlessly integrated component composed of functional faceplates and dielectric lossy material-based octet-truss geometries toward a lightweight, load-bearing, and high-performance broadband EM wave absorber. EM responses are explored in the 4–18 GHz range by varying material combinations and multilayers of the upper-lower faceplates and the octet-truss core, elucidating the absorbing mechanisms of meta-sandwich structures. Multi-material 3D printing that streamlines the production of the seamless meta-sandwich composite into a single step implements the devised design that simultaneously excel in EM wave absorption and mechanical functionalities. The fabricated composite in a thin, single-layer structure comprising a transmitting upper faceplate, a dielectric lossy core, and a reflecting lower faceplate, achieves an average absorption rate of 95.0 % and a broadband reflection loss (≤-10 dB) over the entire measured bandwidth. Furthermore, flexural testing confirms superior bending resistance compared to conventional honeycomb structures. The multi-materials meta-sandwich design will inspire versatile multifunctionalities enabled by rationally combining mechanical metamaterials and functional housing.

Vector synthesis of fault testing map for logic

Vector synthesis of fault testing (simulation) map for logic is proposed, which without simulation allows to determine of all faults detected on test sets, as well as determining test sets to detect specified faults. For synthesis, a superposition of smart data structures is used, containing: a deductive matrix D, as a derivative of the logical vector L, test truth table T, and fault truth table F. The deductive matrix is seen as the gene of functionality and base of fault simulation mechanism to solve all the problems of testing and verification. In the matrix synthesis, an axiom is used: all the mentioned tables are identical in shape to each other and always interact with each other convolutionally T⊕L⊕F=0. A universal deductive reversing converter “test-faults” and “faults-test” for logical functionalities of any dimension is proposed. Converter functions: fault simulation on test sets T→F and synthesis of test sets F→T to detect the specified faults. The converter can be used as a test generation and fault simulation service for IP-core system-on-chip (SoC) under the IEEE 1500 SECT standard. Based on the deductive matrix, a fault testing map for logic is built, where each test set is matched with the logic-detected faults of the input lines.