Measurement Of Properties Research Articles

Alkaline-Responsive, Self-Healable, and Conductive Copolymer Composites with Enhanced Mechanical Properties Tailored for Wearable Tech.

Despite significant advancements, current self-healing materials often suffer from a compromise between mechanical robustness and functional performance, particularly in terms of conductivity and responsiveness to environmental stimuli. Addressing this issue, the research introduces a self-healable and conductive copolymer, poly(ionic liquid-co-acrylic acid) (PIL-co-PAA), synthesized through free radical polymerization, and further optimized by incorporating thermoplastic polyurethane (TPU). This combination leverages the unique properties of each component, especially ion-dipole interactions and hydrogen bonds, resulting in a material that exhibits exceptional self-healing abilities and demonstrates enhanced mechanical properties and electrical conductivity. Moreover, the PIL-co-PAA/TPU films showcase alkaline-responsive behavior, a feature that broadens their applicability in dynamic environments. Through systematic characterization, including thermogravimetric analysis, tensile testing, and electrical properties measurements, the mechanisms behind the improved performance and functionality of these films are elucidated. The conductivities and ultimate tensile strength (σuts) of the PIL-co-PAA/TPU films regain 80% under 8h healing process. To extend the applications for wearable devices, the self-healing properties of commercial cotton fabrics coated with the self-healable PIL-co-PAA are also investigated, demonstrating both self-healing and electrical properties. This study advances the understanding of self-healable conductive polymers and opens new avenues for their application in wearable technology.

HiPSC-derived cardiomyocyte cultivation and measurement of electrophysiological properties on gelatine/glucose/polypyrrole scaffold

Abstract Funding Acknowledgements Type of funding sources: Public grant(s) – EU funding. Main funding source(s): EU Horizon 2020 Framework Programme (H2020) under Grant agreements No. 953138 (EMAPS-Cardio) Purpose Cardiotoxicity is one of the main side effects limiting development of new medicines and resulting in withdrawal of drugs from the market. There are different mechanisms of drug-induced cardiotoxicity, including arrhythmia, disruption of mitochondria function, apoptosis, altered growth factor signalling [1]. Heart on a chip model for drug testing seems attractive approach to evaluate the possible cardiotoxic effects on cell biological, but mostly electrophysiological properties. Our aim was to create a 3D system with a biocompatible scaffold, coated with a conductive layer, suitable for culturing and maturation of human induced pluripotent stem cell derived cardiomyocytes (hiPSC-CMs) and compatible with electrophysiology parameter measurement techniques. Methods Elastic scaffold was fabricated by electrospinning of gelatin-glucose microfibers followed by the vapor-phase and electrochemical deposition of conductive polymer polypyrrole (PPy) to create electroconductive layer. hiPSC-CMs at different maturation levels (at 6 vs 14 weeks) were used to test biocompatibility of the scaffold. To increase cell attachment, scaffold was treated with 0.1 M HCl and coated with Geltrex. Cells were stained with fluorescent dyes (Calcein AM, DAPI). Electrophysiological properties were analysed using intracellular calcium imaging (Cal520) and action potential recordings with sharp electrodes. HiPSC-CMs on coverslips were used as a 2D control. Results Calcein AM staining showed that high number of hiPSC-CMs attached to gelatine/glucose/PPy scaffold proving that the scaffold is biocompatible and cells remain viable even after long term incubation (> 2 weeks). HiPSC-CMs at lower maturity (6 weeks) had better attachment properties to it, indicating that more mature cardiomyocytes (14 weeks) gradually lose their capacity to attach to PPy surface. Intracellular calcium imaging showed that both types of cells generated synchronous spontaneous calcium oscillations on gelatine/glucose/PPy scaffolds. Action potential recordings in 3D were similar to those in 2D, and confirmed differences in hiPSC-CMs maturation levels – at lower maturation level hiPSC-CMs had lower upstroke velocity as compared to more matured hiPSC-CMs. Conclusions Gelatine/glucose/PPy scaffold is biocompatible for hiPSC-CMs cultivation, and suitable for evaluation of cardiomyocyte electrophysiological properties. Such electromechanoactive scaffold can be further employed for development of heart-on-a-chip model.

Using construction and demolition waste materials to alleviate the negative effect of pavements on the urban heat island: A laboratory, field, and numerical study

In this study, construction and demolition waste (CDW) materials, including waste clay bricks, concrete, and glass, were used as aggregates of chip seal layers to enhance the reflectivity and reduce the temperature of asphalt pavements as an urban heat island (UHI) mitigation policy. UHI is an urban area that has a higher temperature in comparison to its suburbs. As considerable parts of cities are covered with asphalt pavements, their heat absorption and heat release can directly affect the UHI. Four types of chip seal layers, containing CDW aggregates were prepared in this study. The reflectivity and cooling effects of asphalt pavement coated with the developed chip seals were then evaluated with laboratory, field experiments, and computational fluid dynamics (CFD) simulation. Regarding the laboratory methods, UV-Visible-NIR spectrometer reflectance, a trident thermal properties measurement, and solar simulation cooling effect were used. Besides, the albedo and cooling effects of the developed chip seals were evaluated with a pyranometer and thermocouples through a field experiment. The indoor reflectance test showed yellow and red brick chip seals reflected almost 136 % higher than the aged asphalt pavement, followed by concrete chip seals with 80 % higher solar reflectance. Besides, the surface temperatures of yellow brick, red brick, and concrete chip seals were 23 %, 18 %, and 15 % cooler than the hot mix asphalt (HMA) specimens. More importantly, clay brick chip seals had the lowest nighttime heat release, followed by the concrete chip seal. The field test indicated that the albedo of yellow brick was 2 and 6 times higher than the aged and new HMA, causing 17 % and 27 % lower surface temperatures. The numerical models also revealed that using the yellow brick and concrete chip seals decreased the surrounding air temperature at least by 18 % and 14 % respectively. Overall, the numerical modeling, laboratory, and field tests showed similar results, indicating the benefits of using clay bricks and concrete aggregates for chip seal development, which can mitigate the UHI effectively.

Polyvinyl alcohol (PVA)-based films: insights from crosslinking and plasticizer incorporation

The properties of polyvinyl alcohol (PVA) films are intricately influenced by factors such as polymer structure, fabrication method, the addition of plasticizers and the molecular weight of monomers. This research, investigates the implication of PVA films using a solution casting method for crosslinking with boric acid (H3BO4), glycerol (C3H8O3) and citric acid (C6H8O7). This approach is compared with pure PVA films, establishing a valuable benchmark. For the experiments, tensile strength tests, physicochemical property measurements, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses were conducted to gain insights into the microstructure, surface characteristics and mineral composition of the films. This comprehensive approach aims to enhance our understanding of the intricate relationship between PVA, plasticizers and crosslinking agents, providing valuable insights for applications across diverse industries, including, construction and biomedical fields. The overarching objective of this research is to revolutionize the construction industry by developing polymer films that serve as the foundation for self-healing materials, fostering durability and innovation. The experiments revealed a significant influence of crosslinking agents on the properties of PVA films as measured.

The Effect of Infiltration Rate on Flood Hazards in Gorontalo City

Infiltration rate is a measurement of the physical properties of soil. The classification of infiltration rates according to ILRI (1974) based on the results of changes by Rickard and Cossens (1965) is an important characteristic to indicate land drainage conditions. The aim of this research is to determine the classification of infiltration and its extent. The research method uses a grid system by dividing the city area into 250 m x 250 m consisting of 108 grids with 46 grids representing the lowlands. The infiltration rate in Gorontalo City as a whole is classified as very slow 2189.44Ha or 32.81%, the meaning of this percentage shows that an infiltration rate of less than 2.5 cm/hour occurs in Gorontalo City. For the infiltration rate with a slow classification, the speed is 2.5– 15 cm/hour, covering an area of 2615.38 Ha or 39.17%.

Impact of Oxygen Stoichiometry on the Thermoelectric Properties of Bi2Sr2Co2Oy Thin Films.

In this study, we present a comprehensive analysis of the thermoelectric (TE) properties of highly c-axis-oriented thin films of layered misfit cobaltates Bi2Sr2Co2Oy. The films exhibit a high c-axis orientation, facilitating precise measurements of electronic transport and TE properties along the a-b crystallographic plane. Our findings reveal that the presence of nearly stoichiometric oxygen content results in high thermopower with metallic conductivity, while the annealing of the films in a reduced oxygen atmosphere eliminates their metallic behavior. According to the well-established Heike's limit, the thermopower tends to become temperature independent when the thermal energy significantly exceeds the bandwidth, which provides a rough estimation of charge carrier density by using the Heike's formula. This observation suggests that the dominant contribution to the thermopower comes from the narrow Co-t2g bands near the Fermi energy. Our study demonstrates that the calculated thermopower value using Heike's formula, based on the Hall electron density of the Bi2Sr2Co2Oy thin films at 300 K, aligns well with the experimental results, shedding light on the intriguing TE properties of this family of layered cobaltate oxide films.

On the impact of radiative transfer in fluorescence imaging of bacterial films and suspensions

Fluorescence imaging and spectroscopy are convenient, rapid, and simple methods to analyze chemical samples including biological materials such as bacterial biofilms and suspensions. In principle, these techniques could be used to diagnose or discriminate between infectious bacteria in infections of the skin or ocular surface (microbial keratitis, MK). However, the extension of these techniques to macroscopic turbid media that strongly absorb and scatter light is difficult. Radiative transfer effects obscure the relationship between microscopic scattering and absorption properties and macroscopically observable quantities such as fluorescence intensity, transmission, and reflection. A combination of experimental measurements of aqueous bacteria cell suspensions and Monte Carlo radiation transfer simulations are performed to better understand these effects. Several general observations, e.g., that fluorescence intensity is maximized in scattering-dominated media, are discussed in detail. It was found that wavelength-dependent radiative transfer effects are observable even at moderate optical densities (OD ∼ 1; well below the diffusion limit). Careful consideration of radiative transfer effects using physically rigorous models is needed to determine single-cell scattering and absorption properties and interpret quantitative fluorescence measurements accurately in most cases of interest. A detailed discussion of radiative transfer effects and analytical models is provided. In the context of surface infections and MK, it was found that radiative transfer effects may be negligible for the model bacteria E. coli in some cases. However, more accurate measurements of microbe optical properties are needed to confirm and extend this conclusion to other species. Overall this work demonstrates that quantitative fluorescence imaging and spectroscopy of bacterial films and suspensions is feasible, but requires detailed sample characterization and careful consideration of radiative transfer effects.

Changes in microstructure, magnetocaloric effect and critical behavior of La0.8Sr0.2MnO3 manganites by K/Co doping

We prepared La0.8-xKxSr0.2Mn0.95Co0.05O3 (0 ⩽ x ⩽ 0.1) (LKSMCO) through the modified sol-gel method (S-G) and its structure. Then, the magnetic, magnetocaloric, and critical behavior were analyzed. LKSMCO was confirmed to be the rhombohedral structure within the R-3c space group (No.167) using transmission electron microscopy and X-ray diffraction. For validating the chemical composition of LKSMCO, X-ray photoelectron spectroscopy and EDS were applied, showing that K+ was successfully doped. Phase transition of LKSMCO from paramagnetic to ferromagnetic phase near Curie temperature (Tc) was confirmed with a Magnetic Property Measurement System (MPMS). Using normalization and Banerjee's criterion, LKSMCO was demonstrated to be the second-order magnetic phase transition (SOMPT). As shown from the applied magnetic field, the maximal magnetic entropy (−ΔSMmax) of LKSMCO near Tc was 3.87 J/(kg K) (x= 0.00), 4.28 J/(kg K) (x= 0.05) and 4.44 J/(kg K) (x= 0.10). We employed the Kouvel-Fisher approach (KF) and modified Arrott plots to confirm the values of γ, δ, and β. This indicates that critical exponents of LKSMCO were consistent with the Mean-filed model.

SYNTHESIS, CHARACTERIZATION, DFT, AND BIOLOGICAL ASSAY OF NEW XANTHATE COMPLEXES WITH NITROGEN BASES

This study introduces a new series of complexes and adducts, denoted by [M(2-PhOEtXant)2.nL], where M represents Mn(II), Fe(II), Co(II), or Ni(II), and the ligand (2-PhOEtXant) is 2-Phenoxyethylxanthate. Varying ligands, including pyridine, piperidine, quinoline, ethylenediamine, and (1,10)-phenanthroline, are explored based on the value of n. Comprehensive characterization, encompassing techniques like 1H-NMR, 13C-NMR, FTIR, AA, CHN analysis, UV-visible spectroscopy, and magnetic property measurements, is employed. Results indicate an octahedral geometry for these complexes, as revealed by effective magnetic moment measurements and electronic spectra analysis. The compounds exhibit noteworthy antioxidant properties, demonstrated through the DPPH radical scavenging method, highlighting their potential as effective antioxidants. Moreover, the complexes display enhanced antibacterial activity against microbial strains compared to free ligands. This research not only delves into the coordination chemistry of these complexes but also underscores their diverse applications. Combining experimental methods with computational insights using Density Functional Theory (DFT) enhances the understanding of dithiolate transition metal complexes. The alignment of computational and experimental outcomes strengthens the reliability of the findings, laying a robust foundation for interdisciplinary exploration. The identified potential applications in optoelectronics, along with the notable antioxidant and antibacterial activities, position these complexes as promising contenders for advanced technologies and scientific applications.

Micro tensile tester measurement of biomechanical properties and adhesion force of microtubule-polymerization-inhibited cancer cells

Both mechanical and adhesion properties of cancer cells are complex and reciprocally related to migration, invasion, and metastasis with large cell deformation. Therefore, we evaluated these properties for human cervical cancer cells (HeLa) simultaneously using our previously developed micro tensile tester system. For efficient evaluation, we developed image analysis software to modify the system. The software can analyze the tensile force in real time. The modified system can evaluate the tensile stiffness of cells to which a large deformation is applied, also evaluate the adhesion strength of cancer cells that adhered to a culture substrate and were cultured for several days with their adhesion maturation. We used the modified system to simultaneously evaluate the stiffness of the cancer cells to which a large deformation was applied and their adhesion strength. The obtained results revealed that the middle phase of tensile stiffness and adhesion force of the microtubule-depolymerized group treated with colchicine (an anti-cancer drug) (stiffness, 13.4 ± 7.5 nN/%; adhesion force, 460.6 ± 258.2 nN) were over two times larger than those of the control group (stiffness, 5.0 ± 3.5 nN/%; adhesion force, 168.2 ± 98.0 nN). Additionally, the same trend was confirmed with the detailed evaluation of cell surface stiffness using an atomic force microscope. Confocal fluorescence microscope observations showed that the stress fibers (SFs) of colchicine-treated cells were aligned in the same direction, and focal adhesions (FAs) of the cells developed around both ends of the SFs and aligned parallel to the developed direction of the SFs. There was a possibility that the microtubule depolymerization by the colchicine treatment induced the development of SFs and FAs and subsequently caused an increment of cell stiffness and adhesion force. From the above results, we concluded the modified system would be applicable to cancer detection and anti-cancer drug efficacy tests.

Effect of enzymatic modification on the structure and rheological properties of diluted alkali-soluble pectin fraction rich in RG-I

This study focuses on pectin covalently linked in cell walls from two sources, apples and carrots, that was extracted using diluted alkali, and it describes changes in the rheological properties of diluted alkali-soluble pectin (DASP) due to enzymatic treatment. Given DASP’s richness of rhamnogalacturonan I (RG-I), RG-I acetyl esterase (RGAE), rhamnogalacturonan endolyase (RGL), and arabinofuranosidase (ABF) were employed in various combinations for targeted degradation of RG-I pectin chains. Enzymatic degradations were followed by structural studies of pectin molecules using atomic force microscopy (AFM) as well as measurements of rheological and spectral properties. AFM imaging revealed a significant increase in the length of branched molecules after incubation with ABF, suggesting that arabinose side chains limit RG-I aggregation. Structural modifications were confirmed by changes in the intensity of bands in the pectin fingerprint and anomeric region on Fourier transform infrared spectra. ABF treatment led to a decrease in the stability of pectic gels, while the simultaneous use of ABF, RGAE, and RGL enzymes did not increase the degree of aggregation compared to the control sample. These findings suggest that the association of pectin chains within the DASP fraction may rely significantly on intermolecular interactions. Two mechanisms are proposed, which involve side chains as short-range attachment points or an extended linear homogalacturonan conformation favoring inter-chain interactions over self-association.

Br-Vacancies Induced Variable Ranging Hopping Conduction in High-Order Topological Insulator Bi4Br4.

The defects have a remarkable influence on the electronic structures and the electric transport behaviors of the matter, providing the additional means to engineering their physical properties. In this work, a comprehensive study on the effect of Br-vacancies on the electronic structures and transport behaviors in the high-order topological insulator Bi4Br4 is performed by the combined techniques of the scanning tunneling microscopy (STM), angle-resolved photoemission spectroscopy (ARPES), and physical properties measurement system along with the first-principle calculations. The STM results show the defects on the cleaved surface of a single crystal and reveal that the defects are correlated to the Br-vacancies with the support of the simulated STM images. The role of the Br-vacancies in the modulation of the band structures has been identified by ARPES spectra and the calculated energy-momentum dispersion. The relationship between the Br-vacancies and the semiconducting-like transport behaviors at low temperature has been established, implying a Mott variable ranging hopping conduction in Bi4Br4. The work not only resolves the unclear transport behaviors in this matter, but also paves a way to modulate the electric conduction path by the defects engineering.

The room temperature ethanol gas sensors based on MoS2-CuGaO2 composite prepared by hydrothermal method

In this paper, MoS2-CuGaO2 composites were successfully synthesized by hydrothermal method. The composites were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), respectively. The specific surface area and pore size distribution were obtained by N2 adsorption-desorption isotherms. The gas sensing property measurements were conducted. The sensitivity of pure CuGaO2 based gas sensor to 100 ppm acetic acid and benzene vapor was 1.4 at 25oC. The sensitivity of MoS2-CuGaO2 composite (M − 5) was 6.0 towards 100 ppm ethanol vapor at 25oC. And the detection limit of MoS2-CuGaO2 (M − 5) based sensor was 0.1 ppm. The results demonstrated that MoS2 had effect on the selectivity and sensitivity of the MoS2-CuGaO2 composites. M − 5 composite is considered to be promising for ethanol sensing application in room temperature.

Measurement and Characterization of the Electrical Properties of Actin Filaments

Actin filaments, as key components of the cytoskeleton, have aroused great interest due to their numerous functional roles in eukaryotic cells, including intracellular electrical signaling. The aim of this research is to characterize the alternating current (AC) conduction characteristics of both globular and polymerized actin and quantitatively compare their values to those theoretically predicted earlier. Actin filaments have been demonstrated to act as conducting bionanowires, forming a signaling network capable of transmitting ionic waves in cells. We performed conductivity measurements for different concentrations of actin, considering both unpolymerized and polymerized actin to identify potential differences in their electrical properties. These measurements revealed two relevant characteristics: first, the polymerized actin, arranged in filaments, has a lower impedance than its globular counterpart; second, an increase in the actin concentration leads to higher conductivities. Furthermore, from the data collected, we developed a quantitative model to represent the electrical properties of actin in a buffer solution. We hypothesize that actin filaments can be modeled as electrical resistor–inductor–capacitor (RLC) circuits, where the resistive contribution is due to the viscous ion flows along the filaments; the inductive contribution is due to the solenoidal flows along and around the helix-shaped filament and the capacitive contribution is due to the counterion layer formed around each negatively charged filament.

Enhancing ferroelectric characterization at nanoscale: A comprehensive approach for data processing in spectroscopic piezoresponse force microscopy

Switching Spectroscopy Piezoresponse Force Microscopy (SSPFM) stands out as a powerful method for probing ferroelectric properties within materials subjected to incremental polarization induced by an external electric field. However, the dense data processing linked to this technique is a critical factor influencing the quality of obtained results. Furthermore, meticulous exploration of various artifacts, such as electrostatics, which may considerably influence the signal, is a key factor in obtaining quantitative results. In this paper, we present a global methodology for SSPFM data processing, accessible in open-source with a user-friendly Python application called PySSPFM. A ferroelectric thin film sample of potassium sodium niobate has been probed to illustrate the different aspects of our methodology. Our approach enables the reconstruction of hysteresis nano-loops by determining the PR as a function of applied electric field. These hysteresis loops are then fitted to extract characteristic parameters that serve as measures of the ferroelectric properties of the sample. Various artifact decorrelation methods are employed to enhance measurement accuracy, and additional material properties can be assessed. Performing this procedure on a grid of points across the surface of the sample enables the creation of spatial maps. Furthermore, different techniques have been proposed to facilitate post-treatment analysis, incorporating algorithms for machine learning (K-means), phase separation, and mapping cross correlation, among others. Additionally, PySSPFM enables a more in-depth investigation of the material by studying the nanomechanical properties during poling, through the measurement of the resonance properties of the cantilever–tip–sample surface system.

Improvement of synaptic property of GeSe based CBRAM by engineering the deposition condition of switching matrix

A study of effect of deposition condition of germanium selenide (GeSe) switching layer to Conductive bridging random access memory (CBRAM) device property was conducted to enhance memory property and synaptic property. The devices deposited under the varied deposition conditions were analyzed by current distribution of each state (Low-resistance state [LRS], High-resistance state [HRS]), conduction mechanism analysis, chemical analysis, and synaptic analysis according to pulse conditions. When we deposited switching layer at lowest power (40 W), more Ag ions move to the switching matrix and make lower operation voltage. But there were some disadvantages, which were worst distribution and higher HRS current, less memory window, nonlinear and rapid increase of potentiation process. Conversely, although the device deposited at high voltage increased the operating voltage, but there are improvements, such as the highest memory window and improved linearity of potentiation. The best sample was conducted the synaptic property measurement, and the device successfully mimicked the biological synaptic property with the good linearity of potentiation and depression, spike-rate dependent plasticity (SRDP) and spike-timing dependent plasticity (STDP) properties.

Influences of root fragments on soil thermal property measurements with heat pulse method

Heat pulse (HP) method has been widely applied for measuring thermal properties, heat fluxes, and soil–water evaporation for near-surface soil layers. In topsoil layers, the presence of roots violates the underlying assumption of HP method that the soil under test is homogeneous. In this study, numerical and laboratory experiments were conducted to test the influence of root fragments on soil thermal property measurement with HP sensors. Soybean root fragments, with a water content of about 0.74 m3 m−3 and diameters ranging from 0.5 to 4 mm, were carefully repacked into soil samples that were used for HP measurements. Results showed that the effects of roots on soil thermal property measurements depended on root size, root location and directions relative to the heater probe, and the thermal property differences between soil sample and root. Roots showed negligible influence on heat pulse data when the root fragments were positioned outside the HP measurement region (more than probe space away from heater probe), or root diameters (d) were less than 1 mm, or in oven-dried soil samples. On relatively wet soils (i.e., with water content of 0.05–0.25 m3 m−3), when root fragments were located in between the heater and sensing probes (parallel to the probe planes), (1) the heat capacity (C) and thermal conductivity (λ) differences between root-free soil and root-soil mixture increased proportionally with d increased from 1 mm to 4 mm; (2) the differences in absolute values of C and λ between the root-free soil and soil-root mixture were highly dependent on soil water content. The errors in soil C and λ estimates were larger when the root fragment was parallel with than perpendicular to or inclined 45 degrees to the probe plane, and the error overall decreased with a smaller ρb and sand fraction. When the root fragments were positioned within the HP measurement region, or d were larger than 1 mm, or in relatively wet soil samples, it is important to consider root effect when interpreting HP signals.

Monitoring and Assessment of the Quality of Chlorinated Water in Schools

All water destined for human consumption must be subjected to disinfection processes via chlorination with the aim of eliminating the risk of the transmission of waterborne diseases. However, the treatment of water using this method leads to the formation of trihalomethanes (THMs), which are toxic compounds that may be ingested, inhaled, or absorbed by the skin, increasing the risk of carcinogenic and mutagenic processes. High trihalomethane concentrations in water may be directly related to physicochemical properties, such as temperature, pH, hardness, and potentially toxic metal concentrations. In this work, physicochemical characterization was performed and water quality was assessed with regard to the presence of trihalomethanes in 17 samples collected from points before and after storage in reservoirs. Atomic absorption spectroscopy to determine potentially toxic metals and the measurement of physicochemical properties demonstrated that all results were in accordance with the standards established by Brazilian legislation. Gas chromatography–mass spectrometry was used to determine levels of trihalomethanes in the water samples (trichloromethane, bromodichloromethane, chlorodibromomethane, and bromoform), which were also in accordance with the limits established by Brazilian legislation. Hierarchical clustering on principal components confirmed changes in the water quality depending on location. This work constitutes a paradigm for future studies on the monitoring of toxic organic compounds in water to avoid health problems in humans and animals.

Enhanced Imaging Analysis of Aggregates for Road and Railway Applications

The South African pavement community has shown a keen interest in the use of imaging techniques to characterize the morphological characteristics of aggregates used in road and railway construction. This interest arises from the need to overcome the limitations of the traditional methods currently employed to quantify the shapes of these materials. Recent advancements and the use of enhanced aggregate imaging techniques for quantifying the shapes of crushed stone and ferro slag materials from 10 sources across the country are presented in this paper. A wide range of railway track ballast and road aggregates were selected from various quarries and sources across different provinces for this study. As part of this research, an improved protocol was developed to standardize imaging acquisition and ensure the repeatability of shape property measurements, thereby providing meaningful results and facilitating data analysis. The imaging analysis conducted in this study, which involved close to 2000 aggregate particles, revealed valuable insights into the angularity, surface texture, and flat and elongated ratio properties of coarse aggregates. Preliminary specification limits for these shape properties have been established. This contribution represents an initial step toward supporting the South African road and railway industry in adopting advanced techniques for the selection of aggregate materials.

Gravity and Magnetic Joint Imaging Based on Gramian Constraints

Gravity and magnetic imaging produce numerical images proportional to the density and magnetization source distribution through the upward continuation of potential field data. However, the inherent ambiguity and non-uniqueness in gravity or magnetic imaging restrict the reliability of the imaging model. We develop a joint iterative imaging framework for gravity and magnetic data based on Gramian constraints. The imaging fields of gravity and magnetic field are initially calculated by the depth from extreme points method. With the recovered magnetization and density distribution, the gradient directions of the Gramian function for these model parameters are calculated and utilized to regularize the joint imaging directions for gravity and magnetic fields. The introduction of Gramian constraints achieves mutual complementarity of the gravity and magnetic data and generates density and magnetization models with more distinct boundaries and improved structural coherence. The proposed approach is tested by two synthetic examples and applied to field data from the Galinge iron deposit in Qinghai, China. The real case results are verified by information from drillholes and physical properties measurements of ore and rock samples. Joint imaging provides an alternative to joint inversion with improved resolution and reliability of imaging models compared to separate imaging through the complementarity of gravity and magnetic data.