Mean Internal Rotation Research Articles

Two-year results of double row repair for medium sized rotator cuff tear in elderly patients

Background: Rotator cuff tears are treated surgically when conservative treatment methods fail. Since osteoporosis is common and the cuff is degenerative in nature, it may be a challenge to treat the tears surgically in the elderly. The objective of this study was to evaluate the results rotator cuff repair with double row two anchors (one medial and one lateral) for middle sized tears in patients over 65years old.Methods: 18 patients who are over 65years old treated arthroscopically for medium sized rotator cuff tear were included in the study. Inclusion criteria were patients with MR findings and physical findings consistent with medium sized (1-3cm) rotator cuff tears, patients with follow up period of at least 2years. All of the patients were repaired using (two anchors, one medially and one laterally placed) double row technique arthroscopically. The patients were evaluated with constant Murley score and ASES scores. All these measurements (both ROM and functional tests) were performed preoperatively and at postoperative third sixth months, first year and after second year.Results: Mean age of the patients was 69.3 (±2.6). The mean follows up period was 34months (±4.1) Preoperative mean forward flexion and external rotation were 127.3±25.3º and 48.9±14.6º respectively. The preoperative mean internal rotation was 9.1±6.9º. Preoperative mean ASES score was 59.1º (±9.6) and mean constant score was 53.7º (±11.2). At the last follow up mean forward flexion was 158.3º (±17.9), external rotation was 63.2º (±11.4) and internal rotation was 9.3º (±7.3). Mean ASES score and constant score of the patients were 84.3 (±9.1) and 77.3 (±10.8) in the last follow up.Conclusions: It is possible to obtain good results in medium sized rotator cuff tears in patients over 65years old particularly if fatty degeneration over grade II has not prevailed.

Radiostereometric migration measurement of an uncemented Cerafit® femoral stem: 26 patients followed for 10 years.

Radiostereometric analysis (RSA) is the gold standard for evaluating micromotions of orthopaedic implants. The method is applied for identifying novel design weaknesses in endoprostheses. Current research frequently assesses relatively short time periods. Short-term RSA studies have been widely used for predicting the long-term stability of many hip prosthetic designs, but only a few studies have focused on uncemented hip implants, especially for extended periods. The purpose of this study was to analyse the migration pattern of the Cerafit® femoral stem within 10 years and to verify the predictive value of short-term RSA after 2 years for this uncemented femoral hip stem. Twenty-six patients were followed for 10 years. Ten years after implantation, a mean subsidence of 0.22 mm±0.56 mm, a mean internal rotation of 0.59°±1.67° and a mean maximum total point motion (MTPM) of 1.28 mm±0.54 mm were detected. The main migration took place in the first 6 weeks after surgery (subsidence of 0.36 mm±0.73 mm; internal rotation of 0.62°±1.49°, MTPM of 1.05 mm±0.68 mm). All the migration values measured were small. No late-onset migration was observed. This study suggests that the Cerafit® implants are stable after 10 years. Thus, RSA could be the best tool to assess long-term implant behaviour.

Comparison of cemented and uncemented hemiarthroplasty results in the treatment of comminuted displaced proximal humeral fractures

Aim: In this study, we aimed to compare the results of cemented and uncemented hemiarthroplasty results in elderly patients for the treatment of comminuted proximal humerus fractures. Material and Method: Between 2008 and 2014, patients who underwent hemiarthroplasty due to comminuted proximal humerus fracture were retrospectively investigated using the data system of two university hospitals. Patients who were followed for at least 2 years were included. Demographic information of the patients, fracture type, functional results at final follow-up, visual analog scale score and satisfaction status, radiological results, mean follow-up time and complications were noted. Results: A total of 22 patients (12 males, 10 females) (mean age: 76.4 years, range: 67-88)(8 cemented hemiarthroplasty, 14 uncemented hemiarthroplasty) were included. The mean follow-up time was 38 months. Although the mean forward elevation, external rotation and internal rotation were better in patients who underwent uncemented hemiarthroplasty, no significant difference was found between the two groups. The mean visual analog scale score in uncemented hemiarthroplasty group was 0.87 ± 1.12, whereas the mean visual analog scale score in cemented group was 1.28 ± 0.91 and no significant difference was found (p = 0.33). At radiologic evaluation, no significant difference was found. Periprosthetic fracture was seen in 1 patient of both groups. We have seen 1 shoulder stiffness in uncemented group and 1 deep tissue infection in cemented hemiarthroplasty group. Conclusion: The functional and radiological results of our cemented and uncemented HA patients were similar for the treatment of comminuted proximal humerus fractures in at least 2 years follow-up.

A comparative study of functional outcomes of fractures treated with plating versus conservative for complex proximal humerus fractures in elderly

Introduction: Most proximal humerus fractures are minimally displaced, low energy osteoporotic fractures and are effectively treated with conservative treatment. But for those that have moderate to severe displacement, the optimal treatment for the patient has not been fully elucidated. Aims and Objectives: To compare and evaluate functional outcome of complex proximal humerus fractures treated with plating and conservative method in elderly. Materials and methods: A prospective, comparative study was conducted with 50 patients to compare and evaluate functional outcome of complex proximal humerus fractures treated with plating and conservative method in elderly. Results: The mean flexion, abduction, external rotation and internal rotation values of conservative group were significantly lesser as compared to operative group after 6 weeks. However there was no significant difference between the groups after 6 months Conclusion: Locking plate is an implant of choice for comminuted proximal humerus fractures.In the present study, the outcomes of locked plate fixation were similar to those of nonoperative treatment. Early physiotherapy and good rehabilitation programme is vital to get a good functional outcome.

Shoulder arthroplasty using mini-stem humeral components and a lesser tuberosity osteotomy.

To determine whether lesser tuberosity osteotomy (LTO) and mini-stem humeral components (MSHCs) can be safely and effectively used together in total and hemi-shoulder arthroplasty (TSA/HHA). This is a retrospective review of consecutive patients who underwent anatomic TSA/HHA utilizing combined LTO/MSHC with minimum 2-year follow-up. Six-week and final radiographs, range of motion, pain scores, and selected outcome measures were assessed. Seventy five shoulders with mean follow-up of 27.8months (24-50months) were analyzed. Sixty-seven (89.3%) shoulders had uneventful LTO healing. There were five (6.67%) LTO failures, one (1.33%) fibrous union, and two (2.67%) osteotomies that had displaced > 4mm at 6weeks; four of the five failures required open repair, including one converted to reverse TSA. The other failure, the fibrous union, and the two displaced osteotomies were without clinical deficits and elected for non-operative management. One patient required intraoperative conversion to a long stem due to concern that metaphyseal bone integrity was compromised, in part, by the LTO. Four (5.33%) stems subsided, with one of them also being frankly loose and requiring revision, while the other three were asymptomatic, not requiring treatment. No other stems were judged to be loose. Mean ASES, SANE, VAS, forward flexion, external rotation, and internal rotation all improved significantly (p < 0.001 for all). LTO/MSHC use is appropriate for TSA/HHA, achieving pain relief and functional improvement. Component loosening appears uncommon at early follow-up. Long-stem components should be available in case the metaphyseal bone is compromised. When performed properly, LTO/MSHC use is a safe and effective surgical strategy.

Results of the Latarjet coracoid bone block procedure performed by mini invasive approach.

The coracoid block technique described by Latarjet was modified by Patte and Walch in order to increase the glenoid surface. Saragaglia further modified this technique and described a minimally invasive approach which allows faster post-operative recovery. The aim of this study was to evaluate the medium-term functional and radiological results of this technique. This is a single surgeon cohort of 40 shoulders in 38 patients (32 men, 6 women) with an average age of 34.5years operated on between January and December 2014. The skin incision was 3 to 6cm long allowing the bony block to be passed under the subscapularis tendon without sectioning it and to be placed in lying position. The bone block was fixed with a 6.5 cancellous screw or a 7.0 cannulated screw. At an average follow-up of 48months, there were no recurrent dislocations. The average WOSI score was 42, the average Constant score was 95 corrected to 97% and the average SSV was 97. Visual analogue scores were 0 at rest and 0.6 with activity. The bone block healed in 92.5% of cases. It was flush with the edge of the glenoid in 84% of cases, lateralised in 10% and medialised in 6% of cases. Mean internal rotation power was 12kg in the operated shoulder compared with 9kg in the non-operated shoulder. The treatment of recurrent anterior shoulder instability by mini invasive Latarjet gives excellent medium-term functional results. The rate of recurrent dislocation in this series was zero and internal rotation power was well preserved. This is an excellent alternative to arthroscopic procedures which are yet to demonstrate their superiority over open surgery.

Clinical outcomes of minimally invasive open reduction and internal fixation by screw and washer for displaced greater tuberosity fracture of the humerus

The purpose of this study was to investigate clinical and radiologic outcomes of open reduction and internal fixation with a screw and washer for a displaced greater tuberosity fracture of the proximal humerus through a small incision. We retrospectively reviewed 29 patients who underwent open reduction and internal fixation with a screw and washer for a greater tuberosity fracture of the proximal humerus. After surgery, the patients were immobilized in a brace for 4 weeks. To determine clinical outcomes, we evaluated a visual analog scale pain score; the Subjective Shoulder Value; the University of California, Los Angeles shoulder score; the American Shoulder and Elbow Surgeons score; and active range of motion. All patients achieved bone union within 3 months after surgery. At the 2-year follow-up, the mean visual analog scale pain score was 1.1 ± 1.1; Subjective Shoulder Value, 93.4 ± 5.3; University of California, Los Angeles shoulder score, 31.2 ± 2.7; and American Shoulder and Elbow Surgeons score, 92.6 ± 6.7. Mean active forward flexion, external rotation, and internal rotation were 144° ± 16°, 33° ± 11°, and 13.3 ± 1.7, respectively. Postoperatively, 9 patients (31%) had stiffness and pain refractory to conservative treatment and underwent arthroscopic release. Although minimal open reduction and screw and washer fixation resulted in bone union in all cases, the incidence of postoperative stiffness was relatively high in patients with displaced greater tuberosity fractures because of prolonged immobilization after surgery.

Arthroscopic percutaneous inverted mattress suture fixation of isolated greater tuberosity fracture of humerus

The purpose of the study was to evaluate the clinical and radiographic outcomes of treatment in patients with isolated greater tuberosity (GT) fractures of humerus using arthroscopic percutaneous inverted mattress suture fixation technique. We attempted to use the arthroscopic percutaneous inverted mattress suture fixation technique in 17 consecutive cases with isolated displaced GT fractures. Fourteen patients were successfully treated without switching to other methods and were available for follow-up at a mean of 22 months (range: 17-38 months) after surgery. For assessment of clinical outcomes, we evaluated the range of motion and the visual analog scale (VAS) score, the shoulder index of the American Shoulder and Elbow Surgeons (ASES), and the Korean Shoulder Scale (KSS). At the final follow-up, the VAS improved to 1.0 points (range: 0-3), the mean ASES score improved to 86.9 points (range: 78.3-100) and the KSS improved to 88.6 points (range: 82-100) postoperatively. Mean union time was 10 weeks. Mean forward flexion was 167.8° (range: 140-180°), mean external rotation in neutral position was 36° (range: 20-70°), and mean internal rotation was at the 12th thoracic level (range: T6-L3) at final follow-up. Three cases were switched to open surgery after attempted arthroscopic technique due to large fragment or osteoporosis. In select cases, the arthroscopic percutaneous inverted mattress suture fixation of GT fracture is a simple and reproducible technique with encouraging early results.

Modified False-Profile Radiograph of the Hip Provides Better Visualization of the Anterosuperior Femoral Head-Neck Junction

The purpose of this study was to quantify the amount of internal femur rotation required to visualize the 12 to 3 o'clock positions of the femoral head-neck junction as seen on the false-profile radiograph. Computed tomography (CT) images of the femur were retrospectively reviewed from control subjects and cam femoroacetabular impingement (FAI) patients. Using an automatically determined clockface, the positions between 12 and 3 o'clock were determined. The optimal femoral rotation angle to visualize each clockface position on the femoral head-neck junction was calculated based on the CT surface data. Fifty-nine control subjects and 38 cam FAI patients were evaluated for this study. The mean (95% confidence interval) internal femur rotation needed to optimally visualize the clockface positions of the femoral head-neck junction on the modified false-profile radiograph were 0.9° (0.8°-1.0°) for 3:00, 10.3° (10.0°-10.6°) for 2:30, 21.6° (21.0°-22.1°) for 2:00, 34.3° (33.6°-35.1°) for 1:30, 49.6° (48.6°-50.4°) for 1:00, 68.4° (67.7°-69.0°) for 12:30, and 90.1° (89.9°-90.4°) for 12:00. Internal femur rotation of 35° during the false-profile radiograph may better visualize the femoral head-neck junction in the anterosuperior (1 to 2 o'clock) region commonly associated with the cam lesion. From this view, rotation angles between 0° and 90° can be used to visualize other regions of the anterosuperior femoral head-neck junction. The internal rotation of the affected femur for a modified false-profile radiograph may provide a new radiographic view that can be used to quantify anterosuperior femoral head-neck morphology.

Internal Fixation with a Locking T-Plate for Proximal Humeral Fractures in Patients Aged 65 Years and Older

BACKGROUND: The purpose of this study was to evaluate the clinical and radiographic outcomes of internal fixation with locking T-plates for osteoporotic fractures of the proximal humerus in patients aged 65 years and older.METHODS: From January 2007 through to December 2015, we recruited 47 patients aged 65 years and older with osteoporotic fractures of the proximal humerus. All fractures had been treated using open reduction and internal fixation with a locking T-plate. We classified the fractures in accordance to the Neer classification system; At the final follow-up, the indicators of clinical outcome-the range of motion of the shoulder (flexion, internal rotation, and external rotation) and the presence of postoperative complications-and the indicators of radiographic outcome-the time-to-union and the neck-shaft angle of the proximal humerus-were evaluated. The Paavolainen method was used to grade the level of radiological outcome in the patients.RESULTS: The mean flexion was 155.0° (range, 90°?180°), the mean internal rotation was T8 (range, T6?L2), and the mean external rotation was 66.8° (range, 30°?80°). Postoperative complications, such as plate impingement, screw loosening, and varus malunion were observed in five patient. We found that all patients achieved bone union, and the mean time-to-union was 13.5 weeks of the treatment. The mean neck-shaft angle was 131.4° at the 6-month follow-up. According to the Paavolainen method, “good” and “fair” radiographic results each accounted for 38 and 9 of the total patients, respectively.CONCLUSIONS: We concluded that locking T-plate fixation leads to satisfactory clinical and radiological outcomes in elderly patients with proximal humeral fractures by providing a larger surface area of contact with the fracture and a more rigid fixation.

Hook Plate Fixation for Isolated Greater Tuberosity Fractures of the Humerus

BACKGROUND: The purpose of this study was to investigate the outcomes after fixation using a 3.5-mm locking compression plate (LCP) hook plate for isolated greater tuberosity (GT) fractures of the proximal humerus.METHODS: We evaluated the postoperative radiological and clinical outcomes in nine patients who were followed up at least 1 year with isolated GT fractures. Using the deltopectoral approach, we fixed the displaced GT fragments with a 3.5-mm LCP hook plate (Synthes, West Chester, PA, USA). Depending on the fracture patterns, the hook plate was fixed with or without augmentation using either tension suture or suture anchor fixation.RESULTS: All the patient showed successful bone union. The mean time-to-union was 11 weeks. The radiological and clinical outcomes at the final follow-up were generally satisfactory. The mean visual analogue scale for pain, the University of California at Los Angeles score, the American Shoulder and Elbow Surgeons score, and the subjective shoulder value were 1.4, 30.3, 84.3, and 82.2%, respectively. The mean active forward flexion, abduction, external rotation, and internal rotation of the shoulder were 156.7°, 152.2°, 61.1°, and the 10th thoracic vertebral level, respectively. Only one patient presented with a postoperative complication of shoulder stiffness. The patient was treated through arthroscopic capsular release on the 5th postoperative month.CONCLUSIONS: We conclude that fixation using 3.5-mm LCP hook plates for isolated GT fractures of the proximal humerus is a useful treatment method that provides satisfactory clinical and radiological outcomes.

Hip Dysplasia: Prevalence, Associated Findings, and Procedures From Large Multicenter Arthroscopy Study Group

To report observational findings of patients with acetabular dysplasia undergoing hip arthroscopy. We performed a comparative case series of multicenter registry patients from January 2014 to April 2016 meeting the inclusion criteria of isolated hip arthroscopy, a documented lateral center-edge angle (LCEA), and completion of preoperative patient-reported outcome measures. A retrospective analysis compared range of motion, intra-articular pathology, and procedures of patients with dysplasia (LCEA ≤25°) and patients without dysplasia (LCEA >25°). Of 1,053 patients meeting the inclusion criteria, 133 (13%) had dysplasia with a mean LCEA of 22.8° (standard deviation, 2.4°) versus 34.6° (standard deviation, 6.3°) for non-dysplasia patients. There were no statistically significant differences in preoperative modified Harris Hip Score, International Hip Outcome Tool-12 score, or visual analog scale score (pain). Cam deformity occurred in 80% of dysplasia patients. There was a significant difference in internal rotation between the dysplasia (21°) and non-dysplasia groups (16°, P < .001). Mean internal rotation (33.5°; standard deviation, 15.6°) of the dysplastic subjects without cam morphology was greater than that of the dysplastic patients with cam morphology (18.5°; standard deviation, 11.6°; P < .001). Hypertrophic labra were found more commonly in dysplastic (33%) than non-dysplastic hips (11%, P < .001). Labral tears in patients with dysplasia were treated by repair (76%), reconstruction (13%), and selective debridement (11%); labral treatments were not significantly different between cohorts. The most common nonlabral procedures included femoroplasty (76%) and synovectomy (73%). There was no significant difference between the dysplasia and non-dysplasia groups regarding capsulotomy types and capsular closure rates (96% and 92%, respectively). Dysplasia, typically of borderline to mild severity, comprises a significant incidence of surgical cases (13%) by surgeons performing high-volume hip arthroscopy. Despite having similar preoperative pain and functional profiles to patients without dysplasia, dysplasia patients may have increased flexed-hip internal rotation. Commonly associated cam morphology significantly decreases internal rotation. Arthroscopic labral repair, femoroplasty, and closure of interportal capsulotomy are the most commonly performed procedures. Level III, therapeutic comparative case series.

Early postoperative magnetic resonance imaging findings after arthroscopic rotator cuff repair: T2 hyperintensity of the capsule can predict reduced shoulder motion.

The purpose of this study was to investigate whether postoperative shoulder magnetic resonance imaging (MRI) findings correlate with postoperative shoulder range of motion (ROM) at about 4 months after arthroscopic rotator cuff repair (ARCR). Signal-intensity changes of the capsule, pericapsular soft tissue at the axillary recess, and subcoracoid fat triangle, as well as the thickness of the capsule at the axillary recess and coracohumeral ligament were assessed on preoperative and postoperative MR images of 232 patients. The ROM was evaluated preoperatively and at about 4 months after ARCR. T2 hyperintensity of the capsule, pericapsular soft tissue at the axillary recess, and signal change of the subcoracoid fat triangle were detected in 155, 107, and 89 cases, respectively, on postoperative MRI. Among these cases, 129, 98, and 69 cases, respectively, showed newly developed signal changes. The mean thicknesses of the capsule and coracohumeral ligament were 1.89 ± 0.69 and 1.64 ± 0.51mm, respectively, on preoperative MRI and 3.74 ± 1.12 and 2.42 ± 0.56mm, respectively, on postoperative MRI. At the 4-month follow-up, the mean external rotation (ER), internal rotation (IR), abduction, forward flexion, and extension were 77, 73, 76, 83, and 82%, respectively, of the contralateral side. Newly developed T2 hyperintensity of the capsule and pericapsular soft tissue at the axillary recess on postoperative MRI significantly correlated with the postoperative limitation of ER (p = 0.039) and IR (p = 0.020). Newly developed signal changes of the capsule, pericapsular soft tissue at the axillary recess, and subcoracoid fat triangle were often detected on postoperative MRI at 4 months after ARCR. Furthermore, newly developed T2 hyperintensity of the capsule and pericapsular soft tissue at the axillary recess correlated with limited ROM in ER and IR at 4 months after ARCR.

A prospective study of 30 cases of PHILOS plating for displaced proximal humeral fractures

Introduction: Fractures of proximal humerus is still unsolved fractures in many ways. The Proximal humeral internal locking system (PHILOS) plate fixation provides greater angular stability, works as a locked internal fixator and provides better anchorage of screws in osteoporotic bone, early joint mobilisation and good functional outcome. Considering these advantages and the scarcity of data on the efficacy and the functional outcome following internal fixation with PHILOS plate for displaced proximal humerus fractures, the present study was planned. Materials and Methods: This study was conducted from October 2014 to October 2016. 30 cases who sustained proximal humerus fractures were enrolled in the study. Through delto-pectoral approach, the fracture site was reduced and fixed with PHILOS plate. Follow up was done at 6 wks, 12 wks and 6 months. Patients were evaluated for 1.Range of motion of the Shoulder. 2. Complications. 3. Clinical union. 4. Radiological union. The final assessment was done using DASH score for outcome. Results: Excellent outcome was noted in 20%, good in 47%, fair in 26% and poor in 7%. The outcome was independent to side of fracture (p=0.935), mode of injury (p=0.914) and type of fracture (0.562) as no statistically significant association was noted. 90% patients had clinical and radiological union at three months. The range of motion at first, second and third follow ups showed gradual increase in mean flexion, abduction, external rotation and internal rotation. Conclusion: PHILOS plate provides a high degree of angular and axial stability eliminating screw loosening and backout. The divergent and convergent orientation of the screws engaging in the humeral head prevent pull out and failure of fixation. The PHILOS plate is an ideal construct and a stable implant to use for fractures of the proximal humerus in Neer’s 2-part, 3-part, and 4-part and osteoporotic fractures.

Torso and Bowing Arm Three-Dimensional Joint Kinematics of Elite Cellists: Clinical and Pedagogical Implications for Practice.

Elite cello playing requires complex and refined motor control. Cellists are prone to right shoulder and thoracolumbar injuries. Research informing injury management of cellists and cello pedagogy is limited. The aims of this study were to quantify the torso, right shoulder, and elbow joint movement used by elite cellists while performing a fundamental playing task, a C major scale, under two volume conditions. An eight degrees of freedom upper limb biomechanical model was applied to 3D motion capture data of the torso, upper arm, and forearm for 31 cellists with a mean experience of 19.4 yrs (SD 9.1). Two-factor ANOVA compared the joint positions between the four cello strings and two volume conditions. Significant (p<0.05) effects were found for either the string and/or volume conditions across all torso, shoulder, and elbow joint degrees of freedom. The torso was consistently positioned in left rotation from 5.0° (SD 5.6) at the beginning of the scale, increasing to 16.3° (5.5) at its apogee. The greatest mean shoulder flexion, internal rotation, and abduction joint angles were observed when playing at the tip of the bow on the top string (A): 107.2° (11.6), 59.1° (7.1), and -76.9° (15.7), respectively, during loud playing. Elite cellists use specific movement patterns to achieve string crossings and volume regulation during fundamental playing tasks. Implications of the static left-rotated torso posture and high degrees of combined shoulder flexion and internal rotation can be used to inform clinical and pedagogical practices.

Changes in gait parameters after femoral derotational osteotomy in cerebral palsy patients with medial femoral torsion.

Medial femoral torsion (MFT) is a common pathologic gait in cerebral palsy (CP) children that can be corrected by femoral derotational osteotomy (FDO). It is not clearly known as to how much various gait parameters change after FDO. The aim of this study was to quantify changes in gait parameters after FDO. The study group included 19 young CP patients (28 limbs, age<20 years, average age: 13.2 years) with symptomatic MFT, treated with distal FDO. The study group was divided into two groups: the unilateral FDO group (UG) and the bilateral FDO group (BG). The mean degree of derotation was 24.6° (25.0° for UG, 24.4° for BG). Pre-FDO and post-FDO values of Staheli’s rotational profiles and kinematic data were compared. A paired t-test and Pearson’s correlation were used for statistical analysis. The mean internal hip rotation was 71.4±6.9° before surgery and 48.6±10.7° after surgery in the UG (P<0.05) and it was 63.8±15.8° before surgery and 40.9±9.2° after FDO in the BG (P<0.05). The change in the foot progression angle (FPA) was 12.9° in the UG group (P<0.05) and 12.6° in the BG group (P<0.05). The degree of FPA had changed by about a half of the surgical derotation angle. Changes in the mean hip rotation during gait were 14.8° in the UG (P<0.05) and 6.7° in the BG (P<0.05) groups. The overall pelvic rotation was not changed after surgery. However, in patients with preoperative compensatory pelvic rotation of more than 5°, there was a change of 5.3±4.8° in the UG and 6.6±1.54° in the BG after surgery (P<0.05). There was also a trend showing that the younger the patient, the more the pelvic rotation changed (P=0.069). In-toeing gait because of MFT improved with FDO in CP patients. The expected degree of postoperative correction of FPA and hip rotation is about a half of the FDO degree. The degree of compensatory pelvic rotation should be considered to determine the correction angle of FDO, especially in young patients with preoperative pelvic rotation of more than 5°.

Reverse shoulder arthroplasty in patients with os acromiale

Os acromiale has been reported in up to 15% of the general population. Reverse total shoulder arthroplasty (RTSA) increases deltoid tension, which could potentially lead to excessive stress on a pre-existent os acromiale. The purpose of this study was to determine the outcome and complications of primary RTSA in patients with radiographic evidence of an os acromiale. Between 2005 and 2013, 25 shoulders underwent primary RTSA with an associated os acromiale, which was classified preacromion (3), mesoacromion (20), and meta-acromion (2). All patients were observed for a minimum of 2 years or until reoperation. Mean follow-up time was 30.8 (range, 1-81.4) months. Outcomes included pain scores, range of motion, patient satisfaction, American Shoulder and Elbow Surgeons scores, and radiographic outcomes. RTSA led to an improvement in pain scores in 24 of 25 shoulders. Mean elevation, external rotation, and internal rotation were improved at final follow-up (124°, 46°, and L4, respectively). Three patients required reoperation, including revision surgery for dislocation (2) and excision of a painful os acromiale (1). Postoperative tilting of the os acromiale was noted in 7 shoulders (28%). There was no statistically significant difference in any outcome measures between shoulders with and shoulders without postoperative tilt of the os acromiale. The outcome of RTSA does not seem to be negatively affected by the presence of an os acromiale. Pain around an os acromiale after RTSA is rare. Inferior tilting is observed in approximately one-third of the shoulders after RTSA and does not seem to change the overall outcome.

Shoulder hemiarthroplasty for proximal humeral fractures: analysis of clinical and radiographic outcomes at midterm follow-up: a series of 51 patients.

Shoulder hemiarthroplasty has historically been the gold standard treatment for proximal humeral fractures not suitable to open reduction and internal fixation. In the last decades, reverse shoulder arthroplasty has gained more and more importance. Aim of this study is to retrospectively analyze subjective and objective outcomes of a group of consecutive patients. Fifty-one patients were evaluated with a mean follow-up of 18months (range 12-60). For all the cases, the same surgical technique was performed in all cases. Range of motion, Constant-Murley score, ponderate Constant-Murley score, visual analog score and a patients' self-assessment scale were calculated. Anatomic tuberosities healing, stem positioning or mobilization were evaluated on postoperative X-rays and follow-up CT-scans. Statistical analysis was performed to calculate a correlation between subjective and objective results. Thirty-five patients (75%) declared to be satisfied of the operated shoulder. The mean CMS was 50 (17-91), the mean pCMS 72 (16-111). The mean forward flexion measured was 98° (40°-170°), the mean external rotation with adducted arm 22° (0°-60°), the mean internal rotation at sacrum (gluteus-T12). Four implants needed revision. Forty-seven stems were correctly positioned; 84.3% of tuberosities was anatomic or low positioned and consolidated in 74.5% of cases. Statistical analysis revealed significant correlation between CMS, pCMS, VAS and subjective satisfaction and between anatomic tuberosities healing and 3-part fractures. HA implant is a valid and reliable technique for the treatment of proximal humeral fracture. From our data, patients' satisfaction depends upon pain relief more than upon restore of function.

Presence of rotational errors in long leg radiographs after total knee arthroplasty and impact on measured lower limb and component alignment.

Rotation of the lower limb in weight bearing long leg radiographs has a great impact on measured component and lower limb alignment parameters. We asked which rotational errors of long leg radiographs are present in a high volume centre and which radiological and clinical consequences arise regarding measured coronal component and lower limb alignment after total knee arthroplasty. In 100 long leg radiographs coronal femoral and tibial component alignment and hip knee ankle angle (HKA) were measured. Present rotational errors in long leg radiographs were determined by fibular overlap and its impact on alignment parameters calculated. A mean internal rotation of 8.1° (9.3 SD) with a range between 36° of internal and 16° of external rotation was found in long leg radiographs. This resulted in mean differences between measurements before and after rotational correction regarding femoral and tibial component alignment and HKA of 0.6-0.8° (range 3.5° valgus and 1.6° varus error). Clinically, 11 out of 100 patients were wrongly assigned to either mal- or well-alignment (neutral mechanical alignment within ±3° varus or valgus). Surgeons should be aware of potential rotational errors in long leg radiographs after total knee arthroplasty resulting in wrong measurements. In case of rotational errors, radiographs should be repeated or rotational corrections calculated. For study purposes only radiographs after rotational correction should be accepted.

Clinical Outcomes and Complications during the Learning Curve for Reverse Total Shoulder Arthroplasty: An Analysis of the First 40 Cases.

BackgroundThe purpose of this study was to investigate the results and complications during the learning curve of reverse total shoulder arthroplasty (RTSA) for rotator cuff deficiency.MethodsWe retrospectively reviewed the first 40 cases of RTSA performed by a single surgeon. The mean age of patients was 72.7 years (range, 63 to 81 years) and mean follow-up period was 26.7 months (range, 9 to 57 months). Clinical outcomes were evaluated using a visual analog scale (VAS) for pain, the University of California at Los Angeles (UCLA) shoulder score, American Shoulder and Elbow Surgeon (ASES) score, subjective shoulder value (SSV), and active range of motion (ROM). Intraoperative and postoperative complications were also evaluated.ResultsThe average VAS pain score, UCLA score, ASES score, and SSV improved from 6.9%, 12.8%, 29.0%, and 29.0% before surgery to 1.6%, 27.0%, 73.3%, and 71.5% after surgery, respectively (p < 0.001). The mean forward flexion, abduction, and external rotation improved from 68.0°, 56.9°, and 28.0° before surgery to 131.0°, 112.3°, and 38.8° after surgery, respectively (p < 0.001, p < 0.001, and p = 0.021). However, the mean internal rotation did not improve after surgery (p = 0.889). Scapular notching was observed in 33 patients (51.5%). Eight shoulders (20%) had complications, including 2 major (1 deep infection and 1 glenoid fixation failure) and 6 minor complications (3 brachial plexus injuries, 2 acromial fractures, and 1 intraoperative periprosthetic fracture).ConclusionsThe first 40 cases of RTSA performed by a single surgeon during the learning curve period showed satisfactory short-term follow-up results with an acceptable complication rate.