Maximum Velocity Phase Research Articles

Effects of Age and Sex on the Kinematics of the Sprinting Technique in the Maximum Velocity Phase

Effects of Age and Sex on the Kinematics of the Sprinting Technique in the Maximum Velocity Phase

Does Resisted Sprint Training Improve the Sprint Performance of Field-Based Invasion Team Sport Players? A Systematic Review and Meta-analysis.

Developing the sprint performance of field-based invasion team sport (FITS) players is considered an essential training goal for FITS coaching practitioners, and thus numerous training methods are employed to elicit improvements. Although interest in resisted sprint training (RST) has grown considerably in recent times, there remains a lack of clarity around its utility in FITS, particularly regarding the use and effectiveness of heavier RST loads. The aims of this review were to (1) compare RST to unresisted sprinting, (2) examine if RST can improve sprint performance and (3) investigate if external load and the method of load prescription influence the impact of RST in FITS players. The systematic review and meta-analysis were conducted in compliance with the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines. The search strategy included terms for RST, RST modalities and FITS, and was applied to PubMed, SPORTDiscus, Web of Science and OpenGrey databases. Methodological quality and risk of bias associated with each study were assessed using the Physiotherapy Evidence Database scale (PEDro) and Cochrane Risk of Bias assessment tool respectively. Twenty-one studies met the inclusion criteria for this review and were included in the final analysis. The primary between-group analysis revealed no differences between RST and unresisted sprinting for developing the early acceleration, late acceleration and maximum velocity sprint phases. Secondly, a within-group analysis found significant improvements for resisted sprint training in the early acceleration (standardised mean difference [SMD] - 0.80) and late acceleration (SMD - 0.28) sprint phases, with no change detected for the maximum velocity phase. Finally, significant moderate improvements were found for light (SMD - 0.69) and very heavy (SMD - 1.01) loads during early acceleration. Resisted sprint training achieved similar improvements in sprint performance to those found for unresisted sprinting during the acceleration and maximum velocity sprint phases. Within-group findings show RST is an effective method for improving early acceleration and late acceleration performance of FITS players. Finally, a subgroup analysis supports the use of light and very heavy loads for increasing early acceleration performance, while also highlighting greater benefits associated with using the percentage velocity decrement loading method. Open Science Framework, https://osf.io/thms7/ .

Multicomponent Velocity Measurement for Linear Sprinting: Usain Bolt's 100 m World-Record Analysis.

The purpose of this report is to provide additional analysis and commentary on the men's 100 m world record of 9.58 s, set by Usain Bolt in the 2009 Berlin World Championships in Athletics. In addition, the entire race underwent a unique kinematic analysis, particularly emphasizing the maximum running velocity and its related factors. It was possible due the application of the new Stuhec software. The data were provided by LAVEG'S advanced laser measurement technology based on positional data with a high spatiotemporal resolution. The maximum velocity phase is the most critical determinant of the final race time. Bolt completed two phases in this world-record 100 m sprint: acceleration and top velocity. The borderline between these phases reached the highest velocity of 12.32 m/s on a 52 m run. He could keep the maximum velocity in five 10 m sections (50-100 m). The occurrence of functional asymmetry-the difference in step length between the left and right legs-was also noticed. Longer steps were taken with the left leg, almost over 80 m. From a practical point of view, new technologies (e.g., software) allow coaches and athletes to analyze the kinematic parameters of sprinting even more precisely and in detail. They must take into account precise changes in the course of maximum speed and the parameters determining it which are step length and frequency. Based on such an analysis, it is possible to modify the training process aimed at increasing the potential, both maximum speed and the supporting factors of strength and power. This must be conditioned by the appropriate selection of training measures shaping the abovementioned motor skills and parameters describing the optimal sprinting technique.

Feature-based analysis of a turbulent boundary layer under spanwise wall oscillation

Spanwise wall oscillations alter the organization of low-speed streaks and ejections in turbulent boundary layers, eventually leading to skin friction drag reduction. Such flow regimes are represented by pointwise statistics or spatial correlation. This work attempts to quantify the systematic distortions of the dominant turbulent structures by feature-analysis, intended to overcome the dispersion observed in pointwise statistics and correlation functions. Furthermore, data from tomographic particle image velocimetry are employed to clarify the mechanism that inhibits hairpin auto-generation, as described in Kempaiah et al. [“3-dimensional particle image velocimetry based evaluation of turbulent skin-friction reduction by spanwise wall oscillation,” Phys. Fluids 32(8), 085111 (2020)]. Based on the instantaneous distribution of Reynolds stresses, a specific spatial template is defined for low-speed streaks and flow ejections. Events corresponding to this template are collected and parametrized with their occurrence, geometrical properties (length and orientation), and dynamics (intensity). The approach is compared with most practiced statistical analysis to explain the significance of the features extracted by the detection algorithm in relation to the drag reduction mechanism. Data comparing stationary and oscillating wall in a drag-reducing regime (A+osc = 100, T+osc = 100) are investigated in the near-wall region (y+ < 100). Ejections and low-speed streaks systematically exhibit a positive pitch, supporting the hypothesis that only the rear region, close to the wall, is affected by the wall motion. A side-tilt of elongated ejection events is observed past the phase of maximum oscillation velocity, which is hypothesized to inhibit hairpin auto-generation. The latter indicates a phase dependence of the side-tilt in the oscillating regime. The results also indicate that low-speed streaks and ejection events are reduced by approximately 10% and 15%, respectively, compared with the stationary wall, further consolidating the mechanism of rapid lateral distortion being responsible for the different organizations of the turbulent structures in the near-wall region.

Hip Torque Is a Mechanistic Link Between Sprint Acceleration and Maximum Velocity Performance: A Theoretical Perspective.

Sprinting performance is critical for a variety of sports and competitive activities. Prior research has demonstrated correlations between the limits of initial acceleration and maximum velocity for athletes of different sprinting abilities. Our perspective is that hip torque is a mechanistic link between these performance limits. A theoretical framework is presented here that provides estimates of sprint acceleration capability based on thigh angular acceleration and hip torque during the swing phase while running at maximum velocity. Performance limits were calculated using basic anthropometric values (body mass and leg length) and maximum velocity kinematic values (contact time, thigh range of motion, and stride frequency) from previously published sprint data. The proposed framework provides a mechanistic link between maximum acceleration and maximum velocity, and also explains why time constant values (τ, ratio of the velocity limit to acceleration limit) for sprint performance curves are generally close to one-second even for athletes with vastly different sprinting abilities. This perspective suggests that specific training protocols targeted to improve thigh angular acceleration and hip torque capability will benefit both acceleration and maximum velocity phases of a sprint.

Narrative Review on the Use of Sled Training to Improve Sprint Performance in Team Sport Athletes

ABSTRACT Sprinting is a key component for many individual and team sports. Therefore, to enhance sprint performance, various training methods are widely used by coaches and practitioners, including maximum sprint speed and resisted sprint training. Resisted sprinting with sled towing is a method that has recently received considerable attention from the sport science community. However, to date, no consensus exists regarding its acute and chronic effects in team sport athletes. This narrative review aimed to (a) review and analyze the mechanics of sprinting under unresisted and resisted conditions with a specific focus on team sport disciplines; (b) provide a thorough and applied discussion on the importance of considering acute and chronic effects of sled loading on technique, electromyographic activity, and force production, as well as on the role of muscle architecture and neural factors in sled training; (c) analyze the effects of increasing sled loads during acceleration and maximum velocity phases on contact and flight phases, while concomitantly examining kinetic, kinematic, and neuromuscular aspects, because all these factors affect each other and cannot be properly understood in isolation.

Effects of Vest and Sled Resisted Sprint Training on Sprint Performance in Young Soccer Players: A Systematic Review and Meta-analysis.

Fernández-Galván, LM, Casado, A, García-Ramos, A, and Haff, GG. Effects of vest and sled resisted sprint training on sprint performance in young soccer players: A systematic review and meta-analysis. J Strength Cond Res 36(7): 2023-2034, 2022-The aim of the meta-analysis was to determine the effect of resisted sprint training (RST) on sprint performance in young (<20 years) soccer players and to analyze whether the training equipment (sled or vest) and magnitude of the resistive load (above or below 20% of body mass [BM]) influences the long-term adaptations in sprint performance. Resisted sprint training reduced the acceleration phase time [standardized mean difference (SMD) = -0.41], with greater reduction in sprint time occurring in response to applying resistance with a vest (SMD = -0.70) when compared with a sled (SMD = -0.27). Similar reductions were determined for resistive loads <20% (SMD = -0.55) and ≥20% of BM (SMD = -0.31). Full sprint time showed a small reduction after RST (SMD = -0.36), regardless of the training equipment (sled: SMD = -0.44; vest: SMD = -0.26) and resistive load (<20% of BM: SMD = -0.40 ≥ 20% of BM: SMD = -0.21). There was a small and nonsignificant reduction in the maximum-velocity phase after RST (SMD = -0.25), which was comparable when the training was performed with vest (SMD = -0.34) or sled (SMD = -0.22). No significant differences in the changes of the acceleration phase time (SMD = 0.05) or full sprint time (SMD = 0.08) were observed between the experimental (sled or vest RST) and control groups (only soccer or unresisted sprint training). In conclusion, RST is effective to improve sprint performance in young soccer players, but the improvements are not superior to unresisted sprint training.

The effect of 8 weeks plyometric training on leg stiffness, lower limb kinematics during maximum velocity phase in young male sprinters

The effect of 8 weeks plyometric training on leg stiffness, lower limb kinematics during maximum velocity phase in young male sprinters

The effect of 8 weeks plyometric training on leg stiffness, lower limb kinematics during maximum velocity phase in young male sprinters

The effect of 8 weeks plyometric training on leg stiffness, lower limb kinematics during maximum velocity phase in young male sprinters

Resisted Sled Sprint Kinematics: The Acute Effect of Load and Sporting Population.

In this study, we assessed the acute kinematic effects of different sled load conditions (unloaded and at 10%, 20%, 30% decrement from maximum velocity (Vdec)) in different sporting populations. It is well-known that an athlete’s kinematics change with increasing sled load. However, to our knowledge, the relationship between the different loads in resisted sled sprinting (RSS) and kinematic characteristics is unknown. Thirty-three athletes (sprinters n = 10; team sport athletes n = 23) performed a familiarization session (day 1), and 12 sprints at different loads (day 2) over a distance of 40 m. Sprint time and average velocity were measured. Sagittal-plane high-speed video data was recorded for early acceleration and maximum velocity phase and joint angles computed. Loading introduced significant changes to hip, knee, ankle, and trunk angle for touch-down and toe-off for the acceleration and maximum velocity phase (p < 0.05). Knee, hip, and ankle angles became more flexed with increasing load for all groups and trunk lean increased linearly with increasing loading conditions. The results of this study provide coaches with important information that may influence how RSS is employed as a training tool to improve sprint performance for acceleration and maximal velocity running and that prescription may not change based on sporting population, as there were only minimal differences observed between groups. The trunk lean increase was related to the heavy loads and appeared to prevent athletes to reach mechanics that were truly reflective of maximum velocity sprinting. Lighter loads seem to be more adequate to not provoke changes in maxV kinematics. However, heavy loading extended the distance over which it is possible to train acceleration.

Kinematic analysis of maximum velocity phase in 100m hurdles: A case study

Kinematic analysis of maximum velocity phase in 100m hurdles: A case study

Estimation of maximum sprinting speed with timing gates: greater accuracy of 5-m split times compared to 10-m splits

ABSTRACT This study assessed the validity of 5-m (TG5) and 10-m (TG10) split times measured with timing gates to estimate maximum sprint speed (MSS) against a criterion measure radar gun (RG) during the maximum velocity phase of a 30-m sprint. Nineteen amateur rugby players performed two 30-m sprints. The timing gates were placed at the starting line and at 5-, 10-, 20-, 25- and 30-m. In addition, a RG was used to measure instantaneous velocity. Both trials per participant were used selected as references. MSS obtained from TG10, TG5 and RG showed high intraclass correlation coefficients (0.971–0.978), low coefficients of variation (1.14–1.70%) and smallest detectable changes (<0.02 m/s). Pairwise comparison revealed differences (p = 0.002) in MSS when comparing TG10 to RG, but not TG5 and RG (p = 0.957). Almost perfect correlations were found between RG, TG5 and TG10 (r > 0.926, p < 0.001). In conclusion, MSS obtained from TG5, TG10 and RG presented good intra-session reliability. However, practitioners should be aware that substantial differences exist between TG10 and RG. For the assessment of MSS in team-sport athletes, it is recommended the use of TG5 for more accurate estimations when a gold standard criterion is not available.

Muscle Activity, Leg Stiffness, and Kinematics During Unresisted and Resisted Sprinting Conditions.

Zabaloy, S, Carlos-Vivas, J, Freitas, TT, Pareja-Blanco, F, Loturco, I, Comyns, T, Gálvez-González, J, and Alcaraz, PE. Muscle activity, leg stiffness and kinematics during unresisted and resisted sprinting conditions. J Strength Cond Res 36(7): 1839-1846, 2022-This study aimed to compare muscle activity, leg stiffness, and kinematics (contact and flight time [FT], stride length and frequency, and trunk angle [TA]) of unloaded sprinting to resisted sprint (RST) using different loads. Twelve male rugby players (age: 23.5 ± 5.1 years; height: 1.79 ± 0.04 m; body mass 82.5 ± 13.1 kg) performed 30-m sprints using different loading conditions (0, 10, 30 and 50% of velocity loss-Vloss-from the maximum velocity reached under unloaded condition). Muscle activity from 4 muscles (biceps femoris long head, rectus femoris [RF], gluteus medius and gastrocnemius), leg stiffness (Kleg), and kinematics were measured during the acceleration and maximum velocity (Vmax) phases of each sprint. Heavier loads led to significantly lower biceps femoris long head activation and higher rectus femoris activity (p < 0.01-0.05). Significant reductions in Kleg were observed as loading increased (p < 0.001-0.05). Kinematic variables showed substantial changes with higher loads during the acceleration and Vmax phase. In conclusion, the heavier the sled load, the higher the disruptions in muscle activity, Kleg, and kinematics. When coaches and practitioners intend to conduct resisted sprint training sessions without provoking great disruptions in sprint technique, very-heavy sled loads (greater than 30% Vloss) should be avoided. However, heavy sled loads may allow athletes to keep specific positions of the early acceleration phase for longer time intervals (i.e., first 2-3 strides during unresisted sprints).

Effects of Plyometric Training on Sprint Running Performance in Boys Aged 9-12 Years.

Skilled sprinting is fundamental in many sports, especially to improve athletic performance in youth. This study therefore aimed to investigate the effect of plyometric training on sprint performance in boys aged 9–12 years. Twenty boys were divided into a plyometric training group (n = 9) and a control training group (n = 11). In both groups, participants performed respective training programs once per week for 8 weeks with measurements at baseline and post-intervention. Sprint performance was assessed by 50-m sprint time, sprint velocity, step frequency and step length at 10-m intervals. Jumping performance was assessed using horizontal, vertical and rebound jumps. The plyometric training group showed an improved sprint velocity at 20–30 m, 30–40 m and 40–50 m, and step length at 0–10 m, 20–30 m and 30–40 m (p < 0.05). Furthermore, only the plyometric group showed an increased standing long jump distance and rebound jump performance (p < 0.05). The control group did not show any significant changes in any variable. Our findings suggest that plyometric training in pre-adolescent boys improves sprint velocity and step length at the maximum velocity phase concomitant with increased horizontal and rebound jump performance.

Phase analysis in maximal sprinting: an investigation of step-to-step technical changes between the initial acceleration, transition and maximal velocity phases

The aim of this study was to investigate spatiotemporal and kinematic changes between the initial acceleration, transition and maximum velocity phases of a sprint. Sagittal plane kinematics from five experienced sprinters performing 50-m maximal sprints were collected using six HD-video cameras. Following manual digitising, spatiotemporal and kinematic variables at touchdown and toe-off were calculated. The start and end of the transition phase were identified using the step-to-step changes in centre of mass height and segment angles. Mean step-to-step changes of spatiotemporal and kinematic variables during each phase were calculated. Firstly, the study showed that if sufficient trials are available, step-to-step changes in shank and trunk angles might provide an appropriate measure to detect sprint phases in applied settings. However, given that changes in centre of mass height represent a more holistic measure, this was used to sub-divide the sprints into separate phases. Secondly, during the initial acceleration phase large step-to-step changes in touchdown kinematics were observed compared to the transition phase. At toe-off, step-to-step kinematic changes were consistent across the initial acceleration and transition phases before plateauing during the maximal velocity phase. These results provide coaches and practitioners with valuable insights into key differences between phases in maximal sprinting.

The Effectiveness of Resisted Sled Training (RST) for Sprint Performance: A Systematic Review and Meta-analysis.

Sprinting is key in the development and final results of competitions in a range of sport disciplines, both individual (e.g., athletics) and team sports. Resisted sled training (RST) might provide an effective training method to improve sprinting, in both the acceleration and the maximum-velocity phases. However, substantial discrepancies exist in the literature regarding the influence of training status and sled load prescription in relation to the specific components of sprint performance to be developed and the phase of sprint. Our objectives were to review the state of the current literature on intervention studies that have analyzed the effects of RST on sprint performance in both the acceleration and the maximum-velocity phases in healthy athletes and to establish which RST load characteristics produce the largest improvements in sprint performance. We performed a literature search in PubMed, SPORTDiscus, and Web of Science up to and including 9 January 2018. Peer-reviewed studies were included if they met all the following eligibility criteria: (1) published in a scientific journal; (2) original experimental and longitudinal study; (3) participants were at least recreationally active and towed or pulled the sled while running at maximum intensity; (4) RST was one of the main training methods used; (5) studies identified the load of the sled, distance covered, and sprint time and/or sprint velocity for both baseline and post-training results; (6) sprint performance was measured using timing gates, radar gun, or stopwatch; (7) published in the English language; and (8) had a quality assessment score > 6 points. A total of 2376 articles were found. After filtering procedures, only 13 studies were included in this meta-analysis. In the included studies, 32 RST groups and 15 control groups were analyzed for sprint time in the different phases and full sprint. Significant improvements were found between baseline and post-training in sprint performance in the acceleration phase (effect size [ES] 0.61; p = 0.0001; standardized mean difference [SMD] 0.57; 95% confidence interval [CI] - 0.85 to - 0.28) and full sprint (ES 0.36; p = 0.009; SMD 0.38; 95% CI - 0.67 to - 0.10). However, non-significant improvements were observed between pre- and post-test in sprint time in the maximum-velocity phase (ES 0.27; p = 0.25; SMD 0.18; 95% CI - 0.49 to 0.13). Furthermore, studies that included a control group found a non-significant improvement in participants in the RST group compared with the control group, independent of the analyzed phase. RST is an effective method to improve sprint performance, specifically in the early acceleration phase. However, it cannot be said that this method is more effective than the same training without overload. The effect of RST is greatest in recreationally active or trained men who practice team sports such as football or rugby. Moreover, the intensity (load) is not a determinant of sprint performance improvement, but the recommended volume is > 160m per session, and approximately 2680m per total training program, with a training frequency of two to three times per week, for at least 6weeks. Finally, rigid surfaces appear to enhance the effect of RST on sprint performance.

Sprint Running Performance and Technique Changes in Athletes During Periodized Training: An Elite Training Group Case Study

To understand how training periodization influences sprint performance and key step characteristics over an extended training period in an elite sprint training group. Four sprinters were studied during 5 mo of training. Step velocities, step lengths, and step frequencies were measured from video of the maximum velocity phase of training sprints. Bootstrapped mean values were calculated for each athlete for each session, and 139 within-athlete, between-sessions comparisons were made with a repeated-measures analysis of variance. As training progressed, a link in the changes in velocity and step frequency was maintained. There were 71 between-sessions comparisons with a change in step velocity yielding at least a large effect size (>1.2), of which 73% had a correspondingly large change in step frequency in the same direction. Within-athlete mean session step length remained relatively constant throughout. Reductions in step velocity and frequency occurred during training phases of high-volume lifting and running, with subsequent increases in step velocity and frequency happening during phases of low-volume lifting and high-intensity sprint work. The importance of step frequency over step length to the changes in performance within a training year was clearly evident for the sprinters studied. Understanding the magnitudes and timings of these changes in relation to the training program is important for coaches and athletes. The underpinning neuromuscular mechanisms require further investigation but are likely explained by an increase in force-producing capability followed by an increase in the ability to produce that force rapidly.

Biomechanical Insights Into Differences Between the Mid-Acceleration and Maximum Velocity Phases of Sprinting.

Yu, J, Sun, Y, Yang, C, Wang, D, Yin, K, Herzog, W, and Liu, Y. Biomechanical insights into differences between the mid-acceleration and maximum velocity phases of sprinting. J Strength Cond Res 30(7): 1906-1916, 2016-Investigating the differences between distinct phases of sprint running may increase the knowledge about the specific physical abilities needed for different phases of sprinting. Differences between the mid-acceleration and maximum velocity phases of sprint running have not yet been adequately investigated. Twenty male sprinters performed maximum-effort sprint runs, and measurements were made at 12 m from start for the mid-acceleration phase and at 40 m from the start for the maximum velocity phase. Kinematic data and ground reaction forces (GRFs) were collected at a rate of 200 and 1000 Hz, respectively. Intersegmental dynamics analysis was performed to investigate the interaction of muscle torque (MUS) with other passive torques. The peak horizontal braking force was significantly lower for the acceleration compared with that for the maximal velocity phase, whereas the peak horizontal propulsive force was similar for both phases. The peak MUS at the hip and knee joints for the braking phase was significantly smaller in the acceleration phase than in the maximum velocity phase. In conclusion, compared with the maximum velocity phase, the lower horizontal braking force was the primary cause for the increase in running velocity during the mid-acceleration phase. The force produced by lower limb muscles required to counteract external torques caused by the horizontal braking force in the braking phase was smaller during the acceleration phase than the maximum velocity phase. Therefore, training aimed at reducing the horizontal braking force might be more important than increasing the force produced by the lower limb muscles for success of the mid-acceleration phase.

Relationship between lower limbs kinematic variables and effectiveness of sprint during maximum velocity phase.

The aim of the study was to determine the relationships between time of running over a 15-25 m section of a 30-meter run along a straight line and changes in the angle and angular velocity observed in ankle, knee and hip joints. Therefore, the authors attempted to answer the question of whether a technique of lower limbs movement during the phase of sprint maximum velocity significantly correlates with the time of running over this section. A group of 14 young people from the Lower Silesia Voivodeship Team participated in the experiment. A Fusion Smart Speed System was employed for running time measurements. The kinematic data were recorded using Noraxon MyoMotion system. There were observed statistically significant relationships between sprint time over a section from 15 to 25 m and left hip rotation (positive) and between this time and left and right ankle joint dorsi-plantar flexion (negative). During the maximum velocity phase of a 30 m sprint, the effect of dorsi-plantar flexion performed in the whole range of motion was found to be beneficial. This can be attributed to the use of elastic energy released in the stride cycle. Further, hip rotation should be minimized, which makes the stride aligned more along a line of running (a straight line) instead of from side to side.

Effects of Vest Loading on Sprint Kinetics and Kinematics

The effects of vest loading on sprint kinetics and kinematics during the acceleration and maximum velocity phases of sprinting are relatively unknown. A repeated measures analysis of variance with post hoc contrasts was used to determine whether performing 6-second maximal exertion sprints on a nonmotorized force treadmill, under 2 weighted vest loading conditions (9 and 18 kg) and an unloaded baseline condition, affected the sprint mechanics of 13 males from varying sporting backgrounds. Neither vest load promoted significant change in peak vertical ground reaction force (GRF-z) outputs compared with baseline during acceleration, and only 18-kg loading increased GRF-z at the maximum velocity (8.8%; effect size [ES] = 0.70). The mean GRF-z significantly increased with 18-kg loading during acceleration and maximum velocity (11.8-12.4%; ES = 1.17-1.33). Horizontal force output was unaffected, although horizontal power was decreased with the 18-kg vest during maximum velocity (-14.3%; ES = -0.48). Kinematic analysis revealed decreasing velocity (-3.6 to -5.6%; ES = -0.38 to -0.61), decreasing step length (-4.2%; ES = -0.33 to -0.34), increasing contact time (5.9-10.0%; ES = 1.01-1.71), and decreasing flight time (-17.4 to -26.7%; ES = -0.89 to -1.50) with increased loading. As a vertical vector-training stimulus, it seems that vest loading decreases flight time, which in turn reduces GRF-z. Furthermore, it seems that heavier loads than that are traditionally recommended are needed to promote increases in the GRF-z output during maximum velocity sprinting. Finally, vest loading offers little as a horizontal vector-training stimulus and actually compromises horizontal power output.