Maximum Removal Torque Research Articles

Resistance to Immediate Orthodontic Loading of Surface-Treated Mini-Implants

To test the hypothesis that there is no difference in the stability and resistance to orthodontic forces of immediately loaded sandblasted and acid-etched (SAE) mini-implants and those of machined-surface implants of the same size and shape. Two types of mini-implants were used in the tibiae of 44 rabbits; some had an SAE surface and some had machined surfaces. Orthodontic loading of 150 g was applied immediately after placement. The success rates and maximum removal torque values (RTVs) of 412 mini-implants were recorded and compared immediately after placement, 3 days after placement, and 1, 6, and 10 weeks after placement. The RTV data were analyzed using multiple regression analysis to evaluate differences with respect to surface treatment, loading, and loading periods (P < .05). Multiple comparisons using the Scheffé method were performed to evaluate the RTVs for the subsequent loading periods. Thirteen mini-implants failed during the experimental period. The SAE group had a higher RTV than the machined group, and there was significant difference in RTVs in accordance with loading periods (P < .001). However, there was no significant RTV difference between loaded and unloaded mini-implants. The hypothesis was supported. Both SAE mini-implants and machined mini-implants can be loaded immediately and experience similar success rates. RTVs were higher for the SAE mini-implants than for the machined mini-implants. The latter finding suggests that, for immediate loading, SAE mini-implants may provide more stable retention than machined mini-implants.

Effects of the Taper Shape, Dual-Thread, and Length on the Mechanical Properties of Mini-Implants

To analyze the mechanical effects of the length and the various shapes such as cylindrical shape, taper shape, and dual-thread shape on the insertion and removal torque of mini-implants. Mini-implants (diameter 1.6 mm and length 6 mm and 8 mm) consisting of cylindrical, taper, and dual-thread groups were inserted and removed in Sawbones while measuring the torque and time. Mechanical analysis was done of maximum insertion torque (MIT), maximum removal torque (MRT), torque ratio (TR; MRT/MIT), insertion angular momentum (IAM), removal angular momentum (RAM), and time of MIT. Measurements were statistically evaluated to analyze any differences of shapes and lengths. The cylindrical shape had the lowest MIT and MRT in each length. Although taper shape showed the highest MIT in each length, dual-thread shape showed significantly higher MRT, TR, and RAM in each length (P < .05). Dual-thread groups showed a gentle increase of insertion torque and a gentle decrease of removal torque in contrast to the other shape groups. However, it had higher IAM and time of MIT. The long length group showed significantly higher measurements except for TR. Dual-thread shape provided better mechanical stability with high removal torque on the broad range than other shapes. However, dual-thread shape may need improvement for reducing the long insertion time to decrease the stress to the surrounding tissue.

Rotational Resistance of Surface-Treated Mini-Implants

To test the hypothesis that there is no difference in the stability and resistance to rotational moments of early loaded sandblasted and acid-etched (SLA) mini-implants and those of machined-surface implants of the same size and shape. A randomized complete block design was used in 12 skeletally mature male beagle dogs. Ninety-six orthodontic mini-implants were tested. Two types of implants were used: some had SLA surface treatment and some had machined surfaces without coating. After 3 weeks of healing, rotational moments of 150 g were applied. The success rates, maximum torque values, angular momentum, and total energy absorbed by the bone were compared. All values were subjected to mixed-model analysis to evaluate the influence of surface treatment, rotational force direction, and site of implantation. The maximum insertion torque and angular momentum of SLA implants were significantly lower than those of machined implants (P = .034, P = .039). The SLA implants had a significantly higher value for total removal energy than the machined implants (P = .046). However, there were no significant differences in total insertion energy, maximum removal torque, and removal angular momentum between the 2 groups. There was no significant difference between clockwise and counterclockwise rotation in all measurements. SLA mini-implants showed relatively lower insertion torque value and angular momentum and higher total energy during removal than the machined implants, suggesting osseointegration of the SLA mini-implant after insertion.

Comparison of Stability between Cylindrical and Conical Type Mini-Implants

To investigate the mechanical and histologic properties of conical compared with cylindrical shaped mini-implants in terms of the success rate. The samples consisted of cylindrical and conical groups, and commonly had 1.6 mm diameter and 6.0 mm length (Jeil Medical Corporation, Seoul, Korea) placed in beagle dogs. The mechanical study for analyzing maximum insertion torque (MIT), maximum removal torque (MRT), and torque ratio (TR; MRT/MIT) in Sawbones (Pacific Research Laboratories Inc, Vashon, Wash), and the animal study for resonance frequency analysis (RFA) and histomorphometric analysis (bone-to-implant contact and bone area) in two beagle dogs were done. All measurements were statistically evaluated using independent t-tests to determine any difference in MIT, MRT, TR, RFA, bone-to-implant contact (BIC), and bone area (BA) between the cylindrical group and conical group. A P value less than 0.05 was considered significant. The conical group showed significantly higher MIT and MRT than the cylindrical group in the mechanical study. However, there was no significant difference in RFA, BIC, and BA between the two groups in the animal and histomorphometric studies. Although the conical shaped mini-implant could induce tight contact to the adjacent bone tissue and might produce good primary stability, the conical shape may need modification of the thread structure and insertion technique to reduce the excessive insertion torque while maintaining the high resistance to removal.

Mechanical Characteristics of Various Orthodontic Mini-screws in Relation to Artificial Cortical Bone Thickness

To evaluate the effect of cortical bone thickness on the maximum insertion and removal torque of different types of self-drilling mini-screws and to determine if torque depends on the screw design. Three different types of self-drilling mini-screws (cylindrical type [Cl], taper type [Ta], taper type [Tb]) were inserted with the use of a driving torque tester at a constant speed of 3 rotations per minute. Experimental bone blocks with different cortical bone thicknesses were used as specimens. Differences in the cortical bone thickness had little effect on the maximum insertion and removal torque in Cl. However, with Ta and Tb, the maximum insertion torque increased as the cortical bone thickness increased. The maximum insertion torque of Tb was highest in all situations, followed by Ta and Tb, in that order. Cl showed less torque loss in all cortical bone thicknesses and a longer removal time compared to Ta or Tb. There were significant relationships between cortical bone thickness, maximum insertion and removal torque, and implantation time in each type of self-drilling mini-screw. Since different screw designs showed different insertion torques with increases in cortical bone thickness, the suitable screw design should be selected according to the cortical thickness at the implant site.