Maximum External Quantum Efficiency Research Articles

Multiple resonance delayed fluorescence emitter with C3 symmetry for high-performance solution-processed OLEDs

Solution-processed organic materials that exhibit both high emission efficiency and narrowband emission characteristics are rare, and the performance of corresponding solution-processed organic light-emitting diodes (sOLEDs) remains inadequate for practical applications. This study proposes a proof-of-concept design aimed at enhancing both solution processing capability and emission efficiency in multiple-resonance induced thermally activated delayed fluorescence (MR-TADF) materials through the integration of multiple emitting units. A unique emitter named TriBNCz is synthesized and characterized, incorporating three MR-building blocks onto a single phenyl ring, resulting in sky-blue emission with a peak at 490 nm and a small full width at half maximum (FWHM) of 25 nm. Significant improvements in solution processing attributes, including solubility and film-forming properties, are achieved. Moreover, except for the MR effect of the excited states, long-range charge transfer properties of excited states are also obtained. The multiple charge transfer channels contribute to higher rate of reverse intersystem crossing (kRISC). The optimized sOLED device exhibits a maximum external quantum efficiency (EQEmax) of 17.8 %. Furthermore, by employing 5TCzBN as a sensitizer, the sensitized sOLED achieves an EQEmax of 28.8 % and a high-level EQE of 26.1 % at 1000 cd m−2, with an FWHM of 30 nm and Commission Internationale de I’Éclairage (CIE) coordinates of (0.103, 0.497), representing one of the best results among narrowband emission sOLEDs. This research opens a new avenue to develop high-performance solution-processed organic materials and sOLED devices.

Very Stable and Efficient Tandem Quantum-Dot Light-Emitting Diodes Enabled by IZO-Based Interconnecting Layers.

Theoretically, tandem quantum-dot light-emitting diodes (QLEDs) hold great promise for achieving both high efficiency and high stability in display applications. However, in practice, their operational stability remains considerably inferior to that of state-of-the-art devices. In this study, we developed a new tandem structure with optimal electrical and optical performance to simultaneously improve the efficiency and stability of tandem QLEDs. Electrically, upon development of a barrier-free interconnecting layer enabled by an indium-zinc oxide bridging layer and a conductive ZnMgO layer, the driving voltage of the tandem QLEDs is remarkably reduced. Optically, upon development of a top-emitting structure and optimization of the cavity length guided by a theoretical simulation, a maximum light extraction efficiency is achieved. As a result, the red tandem QLEDs exhibit a maximum external quantum efficiency of 49.01% and a T95 lifetime at 1000 cd/m2 of >50 000 h, making them one of the most efficient and stable QLEDs ever reported.

44‐3: High Efficiency and Brightness Quantum Rods Light Emitting Diode

Despite substantial efforts, the maximum external quantum efficiency (EQE) of red, green, and blue quantum dots remains close to 25%, limited by the outcoupling efficiency of specific device optical structures. Further improvements have primarily focused on optimizing light management. In this study, we employed rod‐shaped nanocrystals instead of sphere‐like quantum dots as the light‐emitting layer. The theoretical device outcoupling efficiency significantly increased to nearly 41% due to the intrinsic horizontal dipole alignment within the quantum rod film, nearly doubling the efficiency compared to quantum dot light‐emitting diodes (QDLEDs). As a result, we achieved record‐high EQEs of 14.1% for green quantum rod light‐emitting diodes, with maximum brightness exceeding 150,000 cd/m 2 , respectively. Our research demonstrates the immense potential of QRLEDs for display and lighting applications, paving a new way for the commercialization of nanocrystal particles.

High-efficiency red perovskite quantum dot light-emitting diodes via an effective cation exchange method for tunable emission wavelength

The utilization of perovskite quantum dots (PQDs) in photoelectric devices is indeed an area of intense research due to their advantageous properties such as tunability of visible light and efficient light emission. In this study, mixed CsPbI3 and FAPbI3 PQD dispersions were successfully employed for cation exchange to prepare red-color Cs1−xFAxPbI3 PQD with the photoluminescence (PL) wavelength from 689 nm (x = 0) to 778 nm (x = 1). It is also found that the aggregation of Cs1−xFAxPbI3 PQD films were strongly dependent on x. When x from 0 to 0.6, the holes in PQD thin films were gradually improved. On the opposite, when x > 0.6, the PQDs thin films returned more and more holes due to an excess of FA + cations. The resulting Cs1-xFAxPbI3 PQD based light-emitting diodes (LEDs) also demonstrated tunable emission wavelengths, and it is worth mentioning that the maximum external quantum efficiency (EQE) of 11.22 % was achieved with an emission wavelength of 758 nm when x = 0.6.

53‐3: Distinguished Paper: Developing Pure Green Polycyclo‐Heteraborin MR‐TADF Scaffolds for Efficient, Stable Narrowband OLEDs

We developed two symmetrical green MR‐TADF emitters, BpIC‐DPA and BpIC‐Cz, based on the rigidification and regulation of molecular orbitals (MO) engineering strategies. Both emitters exhibited pure green emission with narrow FWHM below 25 nm and high PLQY over 84%. Among the fabricated OLEDs, BpIC‐Cz‐device showed maximum external quantum efficiency (EQEmax) of 25.7% with alleviated efficiency roll‐off characteristics (EQE1000nits = 24.3%) and longer device‐lifetime (LT90) of 291 h at the initial luminance of 1000 nits.

20‐4: Efficient and Stable Red Quantum Dot Light‐Emitting Diode with Modified ZnMgO Nanoparticles

Since ZnO nanoparticles are employed as an electron transport layer in quantum dot light‐emitting diode (QLED), the electroluminescence efficiency of QLED is greatly boosted. However, the QLED stability still faces the challenge. Herein, we modify the ZnMgO nanoparticles with the thiol ligand, which can improve the efficiency and stability of QLED at the same time. As a result, the maximum external quantum efficiency of QLED is improved from 18.6% to 26.0%, accompanied by enhanced voltage sweep stability. Our work provides a practical method to enhance the performance of QLED.

20‐3: Invited Paper: Characteristics of Cadmium‐free Blue NanoLEDs with Protection Technology Applied to Quantum Dots

The nanoLED, an electroluminescent device utilizing quantum dots (QDs), is expected to be a promising candidate for the next‐generation display. This paper presents a newly developed QD protection technology for cadmium‐free nanoLEDs that enables simultaneous achievement of high‐efficiency electroluminescence (EL) and long lifetime. The device which was prototyped by applying ZnSeTe blue QDs to an emissive layer demonstrated a maximum external quantum efficiency (EQE) of 21.0% and a luminance half‐lifetime (LT50) of 128,000 hours at 100 nits. These results indicate that cadmium‐free nanoLEDs can meet the requirements for display application in terms of both EL efficiency and reliability.

Spirobifluorene-appended multi-resonance thermally activated delayed fluorescence emitter for efficient narrowband blue OLEDs with suppressed ACQ effect

Multi-resonance (MR) thermally activated delayed fluorescence (TADF) materials with planar rigidity show great potential as emitters in organic light-emitting diodes (OLEDs) due to their high photoluminescence quantum yields and narrowband emission. However, their strong intermolecular interaction trends usually result in redshifted and broadened emission spectra as well as low device efficiencies due to the aggregation-caused quenching (ACQ) effect. In this paper, a bulky spirobifluorene unit was appended onto an asymmetric carbazole/diphenylamine-embedded MR skeleton to relieve such trends, thus affording a new MR-TADF blue emitter, BNSF-1. Introducing spirobifluorene significantly relieves the intermolecular interaction trends of MR backbones without affecting their original photophysical properties. The corresponding sensitizer-free OLED devices based on BNSF-1 exhibit narrowband sky-blue electroluminescence peaking at 475 nm with a full width at half-maximum of 25 nm, as well as a maximum external quantum efficiency of 25.9 %. More importantly, BNSF-1 exhibited negligible spectral broadening and ACQ trends as the doping ratio increased. Our work provides a feasible method for constructing doping concentration-insensitive MR-TADF emitters.

Structurally Tunable Donor-Bridge-Fluorophore Architecture Enables Highly Efficient and Concentration-Independent Narrowband Electroluminescence.

Luminescent materials with narrowband emission have extraordinary significance for developing ultrahigh-definition display. B-N-containing multiple resonance thermally activated delayed fluorescence (MR-TADF) materials are strong contenders. However, their device performances pervasively encounter detrimental aggregation-caused quenching effect that is highly vulnerable to doping concentration, complicating device fabrication. Therefore, constructing highly efficient and concentration-independent MR-TADF emitters is of pragmatic importance for improving device controllability and reproducibility, simplifying manufacturing procedures, and conserving production costs. Here, by systematic arrangement of donor triphenylamine and fluorophore BNCz on distinct bridges, a spatial confinement strategy has been developed with a donor-bridge-fluorophore architecture. Structurally fine modulation and progressive evolution to construct molecular entities with congested steric hindrance effect that can suppress intermolecular interactions without substantially affecting the luminescence tone of fluorophore BNCz, resulting in highly efficient and concentration-independent narrowband emitters; through isomer engineering, two isomers BN-PCz-TPA and TPA-PCz-BN with different crystal stacking patterns are synthesized by altering the connection mode between triphenylamine and BNCz. As a result, BN-PCz-TPA-based device showcases maximum external quantum efficiency (EQE) of 36.3% with narrow full-width at half-maximum of 27 nm at 10 wt% doping concentration. Even at 20 wt% doping concentration, the maximum EQE remains at 32.5% and the emission spectrum is almost unchanged.

Enhancing the Performance of Perovskite Light-Emitting Diodes via Synergistic Effect of Defect Passivation and Dielectric Screening

HighlightsSynergistic passivation mechanism of the dual functional compound of potassium bromide for metal halide perovskite films, that is through chemical bonding and physical screening towards the various types of defects.Metal-ion additives can simultaneously passivate the defects of halide vacancies with bromine anions and dangling bond defects with metal cations.Achieve the maximum external quantum efficiency of ~21% and maximum luminance of ~60,000 cd m−2.

Self-powered stable high-performance UV–Vis–NIR broadband photodetector based on PVP-Cobalt@Carbon nanofibers/n-GaAs heterojunction

The self-powered PVP-Co@C nanofibers/n-GaAs heterojunction photodetector (HJPD) was fabricated by electrospinning of the nanofibers onto GaAs. An excellent rectification ratio of 6.60 × 106 was obtained from I–V measurements of the device in the dark. The I–V measurements of the fabricated device under 365 nm, 395 nm and 850 nm lights, as well as I–V measurements in visible light depending on the light intensity, were performed. The HJPD demonstrated excellent photodetection performance in terms of a good responsivity of ∼225 mA W−1 (at −1.72 V) and at zero bias, an impressive detectivity of 6.28 × 1012 Jones, and a high on/off ratio of 8.38 × 105, all at 365 nm wavelength. In addition, the maximum external quantum efficiency and NPDR values were 3495% (V = −1.72 V) and 2.60 × 1010 W−1 (V = 0.0 V), respectively, while the minimum NEP value was ∼10−14 W.Hz−1/2 for 365 nm at V = 0.V volts. The HJPD also exhibited good long-term stability in air after 30 d without any encapsulation.

Efficient, Color-Stable, Pure-Blue Light-Emitting Diodes Based on Aromatic Ligand-Engineered Perovskite Nanoplatelets.

Perovskite nanoplatelets (NPLs) show great potential for high-color-purity light-emitting diodes (LEDs) due to their narrow line width and high exciton binding energy. However, the performance of perovskite NPL LEDs lags far behind perovskite quantum dot-/film-based LEDs, owing to their material instability and poor carrier transport. Here, we achieved efficient and stable pure blue-emitting CsPbBr3 NPLs with outstanding optical and electrical properties by using an aromatic ligand, 4-bromothiophene-2-carboxaldehyde (BTC). The BTC ligands with thiophene groups can guide two-dimensional growth and inhibit out-of-plane ripening of CsPbBr3 NPLs, which, meanwhile, increases their structural stability via strongly interacting with PbBr64- octahedra. Moreover, aromatic structures with delocalized π-bonds facilitate charge transport, diminish band tail states, and suppress Auger processes in CsPbBr3 NPLs. Consequently, the LEDs demonstrate efficient and color-stable blue emissions at 465 nm with a narrow emission line width of 17 nm and a maximum external quantum efficiency (EQE) of 5.4%, representing the state-of-the-art CsPbBr3 NPL LEDs.

Excited-State Engineering Enables Efficient Deep-Blue Light-Emitting Diodes Exhibiting BT.2020 Color Gamut.

Organic luminescent materials that exhibit thermally activated delayed fluorescence (TADF) can convert non-emissive triplet excitons into emissive singlet states through a reverse intersystem crossing (RISC) process. Therefore, they have tremendous potential for applications in organic light-emitting diodes (OLEDs). However, with the development of ultra-high definition 4K/8K display technologies, designing efficient deep-blue TADF materials to achieve the Commission Internationale de l'Éclairage (CIE) coordinates fulfilling BT.2020 remains a significant challenge. Here, an effective approach is proposed to design deep-blue TADF molecules based on hybrid long- and short-range charge-transfer by incorporation of multiple donor moieties into organoboron multiple resonance acceptors. The resulting TADF molecule exhibits deep-blue emission at 414nm with a full width at half maximum (FWHM) of 29nm, together with a thousand-fold increase in RISC rate. OLEDs based on the champion material achieve a record maximum external quantum efficiency (EQE) of 22.8% with CIE coordinates of (0.163, 0.046), approaching the coordinates of the BT.2020 blue standard. Moreover, TADF-assisted fluorescence devices employing the designed material as a sensitizer exhibit an exceptional EQE of 33.1%. This work thus provides a blueprint for future development of efficient deep-blue TADF emitters, representing an important milestone towards meeting the blue color gamut standard of BT.2020.

Rational Design of Coumarin-Based Hybridized Local and Charge-Transfer Blue Emitters for Solution-Processed Organic Light-Emitting Diodes.

Hybridized local and charge-transfer (HLCT) with the utilization of both singlet and triplet excitons through the "hot excitons" channel have great application potential in highly efficient blue organic light-emitting diodes (OLEDs). The proportion of charge-transfer (CT) and locally excited (LE) components in the relevant singlet and triplet states makes a big difference for the high-lying reverse intersystem crossing process. Herein, three novel donor (D)-acceptor (A) type HLCT materials, 7-([1,1'-biphenyl]-4-yl(9,9-dimethyl-9H-fluoren-2-yl)amino)-3-phenyl-1H-isochromen-1-one (pPh-7P), 7-([1,1'-biphenyl]-4-yl(9,9-dimethyl-9H-fluoren-2-yl)amino)-3-methyl-1H-isochromen-1-one (pPh-7M), and 6-([1,1'-biphenyl]-4-yl(9,9-dimethyl-9H-fluoren-2-yl)amino)-3-methyl-1H-isochromen-1-one (pPh-6M), were rationally designed and synthesized with diphenylamine derivative as donor and oxygen heterocyclic coumarin moiety as acceptors. The proportions of CT and LE components were fine controlled by changing the connection site of diphenylamine derivative at C6/C7-position and the substituent at C3-position of coumarin moiety. The HLCT characteristics of pPh-7P, pPh-7M, and pPh-6M were systematically demonstrated through photophysical properties and density functional theory calculations. The solution-processed doped OLEDs based on pPh-6M exhibited deep-blue electroluminescence with the maximum emission wavelength of 446 nm, maximum luminance of 8755 cd m-2, maximum current efficiency of 5.83 cd A-1, and maximum external quantum efficiency of 6.54 %. The results reveal that pPh-6M with dominant 1LE and 3CT components has better OLED performance.

Achieving Record External Quantum Efficiency of 11.5 % in Solution-Processable Deep-Blue Organic Light-Emitting Diodes Utilizing Hot Exciton Mechanism.

High performance solution-processable deep-blue emitters with a Commission International de l'Eclairage (CIE) coordinate of CIEy≤0.08 are highly desired in ultrahigh-definition display. Although, deep-blue materials with hybridized local and charge-transfer (HLCT) excited-state feature are promising candidates, their rigidity and planar molecular structures limit their application in solution-processing technique. Herein, four novel deep-blue solution-processable HLCT emitters were first proposed by attaching rigid imide aliphatic rings as functional units onto the HLCT emitting core. The functional units not only improve solubility, enhance thermal properties and morphological stability of the emitting core, but also promote photoluminescence efficiency, balance charge carrier transport, and inhibit aggregation-caused quenching effect due to the weak electron-withdrawing property as well as steric hindrance. The corresponding solution-processable organic light-emitting diodes (OLEDs) substantiate an unprecedented maximum external quantum efficiency (EQEmax) of 11.5 % with an emission peak at 456 nm and excellent colour purity (full width at half maximum=56 nm and CIEy=0.09). These efficiencies represent the state-of-the-art device performance among the solution-processable blue OLEDs based on the "hot exciton" mechanism. This simple strategy opens up a new avenue for designing highly efficient solution-processable deep-blue organic luminescent materials.

Achieving Record External Quantum Efficiency of 11.5 % in Solution‐Processable Deep‐Blue Organic Light‐Emitting Diodes Utilizing Hot Exciton Mechanism

AbstractHigh performance solution‐processable deep‐blue emitters with a Commission International de l′Eclairage (CIE) coordinate of CIEy≤0.08 are highly desired in ultrahigh‐definition display. Although, deep‐blue materials with hybridized local and charge‐transfer (HLCT) excited‐state feature are promising candidates, their rigidity and planar molecular structures limit their application in solution‐processing technique. Herein, four novel deep‐blue solution‐processable HLCT emitters were first proposed by attaching rigid imide aliphatic rings as functional units onto the HLCT emitting core. The functional units not only improve solubility, enhance thermal properties and morphological stability of the emitting core, but also promote photoluminescence efficiency, balance charge carrier transport, and inhibit aggregation‐caused quenching effect due to the weak electron‐withdrawing property as well as steric hindrance. The corresponding solution‐processable organic light‐emitting diodes (OLEDs) substantiate an unprecedented maximum external quantum efficiency (EQEmax) of 11.5 % with an emission peak at 456 nm and excellent colour purity (full width at half maximum=56 nm and CIEy=0.09). These efficiencies represent the state‐of‐the‐art device performance among the solution‐processable blue OLEDs based on the “hot exciton” mechanism. This simple strategy opens up a new avenue for designing highly efficient solution‐processable deep‐blue organic luminescent materials.

Efficient Perovskite Nanograin Light-Emitting Diodes in Green-to-Blue Gamut with Co-Additive Engineering.

Perovskite nanograins exceeding the Bohr exciton diameter show great potential for high-performance light-emitting diodes (LEDs) owing to their bandgap homogeneity, spatial charge confinement, and nonlocal interaction. However, it is challenging to directly synthesize proper nanograins along with reduced crystal defects on functional substrate, and the corresponding high-efficiency perovskite LEDs (PeLEDs) have rarely been reported. In this study, crystallization modulation for perovskites with an effective co-additive system, including lithium bromide, p-fluorophenethylammonium bromide, and 18-crown-6, is performed. Furthermore, it is demonstrated that the proposed co-additive system can synergistically retard perovskite crystallization and reduce crystal defects. Consequently, high-quality perovskite nanograin solids (≈22.8nm) are obtained with a high photoluminescence quantum yield (≈88%). These superior optical properties contribute to developing efficient green PeLEDs with a champion external quantum efficiency (EQE) of 28.4% and an average EQE of 27.1%. The co-additive system can be universally applied to mixed-halide perovskite nanograin LED, presenting a maximum EQE of 24.4%, 21.6%, 17.5%, and 11.1% for the blue device at 496, 488, 478, and 472nm, respectively, along with a narrow spectral linewidth (17-14nm) and stable color. These results supplement the research on high-efficiency perovskite nanograin LEDs for multicolor displays and lighting.

High performance Al/WSe2/CuO/ITO structure based broadband photodetector

This letter reports a Al/WSe2/CuO/ITO structure based broadband photodetector. The low cost spin coating technique is utilized to deposit, p-type WSe2 film and n-type CuO film. The Al contacts were deposited over WSe2 film using thermal evaporation unit. The suggested photodetector gives the broad photo response with maximum Responsivity RS (A/W) and External Quantum Efficiency (EQE) value of 3099 A/W, 3680 A/W, and 493 A/W; 1.20 × 106%, 1.52× 106% and 2.04 × 105% at 350 nm (UV), 500 nm (visible) and 950 nm (IR) under application of −2 V bias. The EQE value beyond 100% are attributed to trap assisted photomultiplication mechanism.

Surface Treatment with Tailored π-Conjugated Fluorene Derivatives Significantly Enhances the Performance of Perovskite Light-Emitting Diodes.

Surface defect passivation and carrier injection regulation have emerged as effective strategies for enhancing the performance of perovskite light-emitting diodes (Pero-LEDs). It usually requires two functional molecules to realize defect passivation and carrier injection regulation separately. In other words, developing one single molecule possessing these capabilities remains challenging. Herein, we utilized π-conjugated fluorene derivatives as surface treatment materials, 9,9-Spirobi[fluorene] (SBF), 9,9-Spirobifluoren-2-yl-diphenylphosphine oxide (SPPO1), and 2,7-bis(diphenylphosphoryl)-9,9'-spirobifluorene (SPPO13), to investigate the influence of their chemical structure on device optoelectronic performance, especially for defect passivation and carrier injection regulation. Consequently, the passivation capability of double-bonded SPPO13 surpassed single-bonded SPPO1 and nonbonded SBF, which all showed excellent electron transport properties, enhancing electron injection. The maximum external quantum efficiencies (EQE) for Pero-LEDs treated with SBF, SPPO1, and SPPO13 were 8.13, 17.48, and 22.10%, respectively, exceeding that of the derivative-free device (6.55%). Notably, SPPO13-treated devices exhibited exceptional reproducibility, yielding an average EQE of 20.00 ± 1.10% based on 30 devices. This result emphasizes the potential of tailored fluorene derivatives for enhancing the device performance of Pero-LEDs.

High‐Efficiency and Long‐Lifetime Near‐Infrared OLEDs Based on Iridium Complexes with Enhanced Horizontal Emitting Dipole Orientation

AbstractHigh‐efficiency and long‐lifetime near‐infrared (NIR) organic light‐emitting diodes (OLEDs) are rarely reported. Herein, three efficient NIR Ir(III) complexes 1–3 are developed with specially designed cyclometallated ligands based on pyrido[3,4‐b]pyrazine and oriented substitutions along the Ir─N bond axis. Electron‐deficient pyrazine ring effectively stabilizes LUMO energy, leading to significant emission bathochromic shift. Importantly, for complexes 2 and 3, oriented substitutions along the direction of the Ir─N bond axis considerably enhance the horizontal emitting dipole orientation ratio up to 90%. Their OLEDs demonstrate high maximum external quantum efficiencies (EQEs), negligible efficiency roll‐offs, superior radiance, and long lifetimes. The maximum EQEs and radiances of devices are 9.84% and 158 W Sr−1 m−2 at 725 nm for 1, 6.98% and 14.03 W Sr−1 m−2 at 760 nm for 2, and 12.49% and 18.94 W Sr−1 m−2 at 735 nm for 3, respectively. The device lifetime LT97 at 10 mA cm−2 is 453 h for complex 2, which sets a champion lifetime for NIR‐OLEDs. This work demonstrates that pyrido[3,4‐b]pyrazine is a desired building block for robust NIR emitting Ir(III) complexes, providing a superior paradigm to combine high efficiency, negligible roll‐off, and long device lifetime simultaneously toward practical applications.