Maximum Emission Wavelength Research Articles

Synthesis of Fluorescent Pyrrolo[1,2-a]pyrimidines from Fischer Carbene Complexes as Building Blocks.

A novel synthetic methodology is reported for the synthesis of fluorescent pyrrolo[1,2-a]pyrimidines. Fischer carbene complexes served as the synthetic platform for (3+3) cyclization to form the heterocyclic moiety. The reaction process furnished two products, their ratio being modulated by the metal, base, and solvent. The selectivity exhibited was studied by analyzing the potential energy surface with density functional theory tools. The photophysical properties of absorption and emission were also evaluated. The dyes absorbed at wavelengths of 240-440 nm, depending on the substituents. The maximum emission wavelength was in the range of 470-513 nm, with quantum yields of 0.36-1.0 and a high Stokes shift range of 75-226 nm.

Effect of heat treatment on the physical stability, interfacial composition and protein-lipid co-oxidation of whey protein isolate-stabilised O/W emulsions

This work aimed to investigate the effects of heat treatments at different temperatures (60, 70 and 90 °C, expressed as HT-60, HT-70 and HT-90) on interfacial composition and protein-lipid co-oxidation in whey protein isolate (WPI)-stabilised O/W emulsions during storage. Compared with control group, all heated emulsions exhibited weaker physical stability over 10 days of storage, which verified by the increased droplet size, as well as decreased adsorbed protein levels and absolute ζ-potential values. Moreover, proteins recovered from the HT-90 emulsion showed the highest fluorescence intensity and red-shift of the maximum emission wavelength, indicating partial unfolding of the protein structure. Meanwhile, severe changes in protein structure were also observed in the HT-70 and HT-90 emulsions, which clearly verified by the degradation of bovine serum albumin, α-lactalbumin and β-lactoglobulin. Furthermore, HT-70 and HT-90 emulsions showed lower levels of lipid hydroperoxides and thiobarbituric acid reactive substances. In contrast, the recovered proteins were subject to severe oxidative stress as indicated by carbonyl and N’-formyl-L-kynurenine. Hierarchical cluster and correlation analysis implied that the process of protein-lipid co-oxidation is inevitable, but it can be retarded by heat treatment. Our results clearly revealed the relevance among heat treatment, interfacial adsorption property, and the protein-lipid co-oxidation of O/W emulsions.

Rapid Analysis of Estrogens in Meat Samples by High Performance Liquid Chromatography with Fluorescence Detection.

A novel reagent named 4-(N-methyl-1,3-dioxo-benzoisoquinolin-6-yl-oxy)benzene sulfonyl chloride (MBIOBS-Cl) for the determination of estrogens in food samples by high-performance liquid chromatography (HPLC) with fluorescence detection has been developed. Estrogens could be easily labeled by MBIOBS-Cl in Na2CO3-NaHCO3 buffer solution at pH 10.0. The complete labeling reaction for estrogens could be accomplished within five minutes, the corresponding derivatives exhibited strong fluorescence with the maximum excitation and emission wavelengths at 249nm and 443nm, respectively. The derivatization conditions, such as the molar ratio of reagent to estrogens, derivatization time, pH, temperature, and buffers were optimized. Derivatives were sufficiently stable to be efficiently analyzed by HPLC with a reversed-phase Agilent ZORBAX 300SB-C18 column with a good baseline resolution. Excellent linear correlations were obtained for all estrogen derivatives with correlation coefficients greater than 0.9998. Ultrasonic-Assisted extraction was used to optimize the extraction of estrogens from meat samples with a recovery higher than 82%. The detection limits (LOD, S/N = 3) of the method ranged from 0.95 to 3.3μg· kg-1. The established method, which is fast, simple, inexpensive, and environment friendly, can be successfully applied for the detection of four steroidal estrogens from meat samples with little matrix interference.

A Turn-Off Fluorescent Biomimetic Sensor Based on a Molecularly Imprinted Polymer-Coated Amino-Functionalized Zirconium (IV) Metal-Organic Framework for the Ultrasensitive and Selective Detection of Trace Oxytetracycline in Milk.

Developing sensitive and effective methods to monitor oxytetracycline residues in food is of great significance for maintaining public health. Herein, a fluorescent sensor (NH2-UIO-66 (Zr)@MIP) based on a molecularly imprinted polymer-coated amino-functionalized zirconium (IV) metal-organic framework was successfully constructed and first used for the ultrasensitive determination of oxytetracycline. NH2-UIO-66 (Zr), with a maximum emission wavelength of 455 nm under 350 nm excitation, was prepared using a microwave-assisted heating method. The NH2-UIO-66 (Zr)@MIP sensor with specific recognition sites for oxytetracycline was then acquired by modifying a molecularly imprinted polymer on the surface of NH2-UIO-66 (Zr). The introduction of NH2-UIO-66 (Zr) as both a signal tag and supporter can strengthen the sensitivity of the fluorescence sensor. Thanks to the combination of the unique characteristics of the molecularly imprinted polymer and NH2-UIO-66 (Zr), the prepared sensor not only exhibited a sensitive fluorescence response, specific identification capabilities and a high selectivity for oxytetracycline, but also showed good fluorescence stability, satisfactory precision and reproducibility. The fabricated sensor displayed a fluorescent linear quenching in the OTC concentration range of 0.05-40 μg mL-1, with a detection limit of 0.012 μg mL-1. More importantly, the fluorescence sensor was finally applied for the detection of oxytetracycline in milk, and the results were comparable to those obtained using the HPLC approach. Hence, the NH2-UIO-66 (Zr)@MIP sensor possesses great application potential for the accurate evaluation of trace oxytetracycline in dairy products.

A Study of the Electronic Absorption and Emission Spectra of DBDMA Dye: Solvent Effect, Energy Transfer, and Fluorescence Quenching

This study is aimed to shed light on the electronic absorption and emission spectra of DBDMA (2-(1-(difluoroboraneyl)-1,2-dihydroquinolin-2-yl)-2-(1-methylquinoxalin-2-ylidene) acetonitrile) in different solvents. Both types of spectra were obtained theoretically and produced experimentally in different solvents. The photostability of dye was tested, and its energy transfer behavior in the presence of oxygen and hydrated copper sulfate quenchers was investigated. We also gave a qualitative estimation of the effect of acidic media on the absorption and emission spectra. There is good compatibility between the calculated and measured values of many photophysical parameters. DBDMA has a low chemical quantum yield in solvents of different polarities, and the fluorescence quantum yield is high enough, which confirms, together with the low values of the excited state lifetime, its efficiency as laser emitting dye in the range of wavelength emission maxima. The rigidity of the DBDMA molecule is the main reason for the photochemical stability and the absence of a considerable shift as a result of the change in the polarity of the solvents. Geometries of ground and excited states were optimized using the density functional theory (DFT) and the time-dependent density functional theory (TD-DFT), respectively. Upon using the TD-DFT method, the UV-Vis absorption and emission spectra of the DBDMA molecule in different solvents were illustrated. A slight change is observed in the position of the maximum emission and absorption wavelength with the change of the solvent due to the rigidity of the compound. There was no apparent effect of quenching by oxygen. Besides, no intersystem crossing (ISC) was observed for the excited state of the DBDMA as a result of aeration of a solution with O2 for 20 min, which was an explanation of the stability of peak emission intensity of dye after exposure to oxygen gas. The energy transfer rate constant has been calculated as well.

Syntheses, optical properties, and bioimaging application of near-infrared aza-BODIPY dyes with electronic push–pull system

It is still a challenging work of developing near-infrared (NIR) fluorescence dyes with excellent optical properties. Herein, we synthesized a series of NIR aza-BODIPY fluorescence dyes with electronic push–pull system and further investigated their photophysical properties, photostability, and application in cellular imaging. It was found that introducing electron-withdrawing groups (EWGs) on the para-position of aza-BODIPY 1,7-phenyls not only leads to the significant redshift of absorption and fluorescence emission bands of aza-BODIPY dyes but also increases their fluorescence quantum yield and photostablility. The DFT calculations and cyclic voltammetry measurements proved that introducing EWGs on para-position of 1,7-phenyls can decrease the energy level difference between HOMO and LUMO, resulting in the redshift of maximum absorption and emission wavelengths. On the basis of the feasible experiment results of cellular imaging and cytotoxicity assay, it is expected that the optimized aza-BODIPY dyes have a bright application prospect for in vivo cellular or tissue imaging.

Tunable Red Clusteroluminescence Polymers Prepared by a Simple Heating Process

Clusteroluminescence (CL) has drawn much attention in recent years. However, the design of red emission clusteroluminogens (CLgens) with tunable CL is still in its infancy. Herein, we report a simple heating process to prepare red emission poly(maleic anhydride-alt-vinyl acetate) (PMV) derivatives with a tunable maximum emission wavelength between 620 and 675 nm. First, heating above the glass transition temperature (Tg) would promote the movement of polymer chains and facilitate the formation of clusters in both solid and solution states. Then, heating beyond the decomposition temperature at which vinyl acetate converts into C═C is favorable to the formation of new clusters and large through-space conjugation among subgroups in polymer chains. Their synergistic effects realize the adjustable emission wavelength and higher quantum yield of polymers. Additionally, low-cost and eco-friendly core-shell PMV particles are prepared as agricultural light conversion agents and exhibit great compatibility with polyethylene.

Carbonized human hair derived carbon dots for detection of clozapine

Clozapine (CLZ) is known as the most effective antipsychotic medication for schizophrenia. However, low dosage or over dosage of CLZ is adverse to the treatment of Schizophrenia. Thus, it is necessary to develop effective detection method for CLZ. Recently, due to the advantages such as excellent optical properties, good photobleachability and sensitivity, carbon dots (CDs)-based fluorescent sensors for the detection of target analytes have drawn a great deal of attention. In this work, blue fluorescent CDs (Named as B-CDs) with quantum yield (QY) as high as 38% were obtained by using carbonized human hair as source material through one-step dialysis method for the first time. B-CDs showed obvious graphite-like structure with an average of 1.76 nm, containing abundant functional groups such as -C=O, amino N and C-N on the surface of carbon cores. Optical analysis showed that the B-CDs exhibited excitation-dependent emission property with maximum emission wavelength of 450 nm. Moreover, B-CDs were further applied as a fluorescence sensor to the detection of CLZ. The B-CDs based sensor exhibited a good quenching response by CLZ through the inner filter effect and static quenching mechanism with a limit of detection of 67 ng/mL, which was much lower than the minimal effective concentration in blood (0.35 μg/mL). Finally, to test the practical application value of the developed fluorescence method, the determination of the content of CLZ in tablets and the concentration in blood was carried out. Compared with the results of high-performance liquid chromatography (HPLC) method, it can be found that the constructed fluorescence detection method showed high accuracy and had great application potential in the detection of CLZ. Additionally, the results of cytotoxicity experiment showed that B-CDs had low cytotoxicity, which laid the foundation for the subsequent application of B-CDs in biological systems.

Construction of Peptide-Isoquinolone Conjugates via Rh(III)-Catalyzed C-H Activation/Annulation.

Herein, we disclose a Rh(III)-catalyzed C-H activation/annulation reaction for the derivatization of Lys-based peptides, in situ affording diverse peptide-isoquinolone conjugates. This approach features racemization-free conditions, high atom- and step-economy, excellent chemo- and site-selectivity, and broad scope including substrates bearing unprotected Trp and Tyr, free Ser and Gln, and Met residues. The peptide-isoquinolone conjugates also display good fluorescent properties with maximum emission wavelengths up to 460 nm. Importantly, preliminary antifungal activity studies indicate that peptide-isoquinolone conjugates show potential activities toward crop and forest pathogenic fungi, in which the peptide-isoquinolone conjugate bearing unprotected Tyr residue exhibits much better antifungal activities toward B. cinerea Pers. and C. chrysosperma than the positive control.

Effect of Microwave Vacuum Freeze-Drying Power on Emulsifying and Structure Properties of Egg White Protein.

The study investigated the effects of different microwave vacuum freeze-drying powers (100-500 W) on the emulsifying properties and structural characteristics of egg white protein, which is of great significance in enhancing the added value of EWP and promoting its application. Emulsification analysis revealed that the emulsification performance was significantly influenced by microwave power and reached its maximum at 300 W. Fourier-transform infrared spectroscopy (FT-IR) and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analyses showed that microwave vacuum freeze-drying treatment altered the secondary structure of EWP without changing its peptide structure. Fluorescence measurements indicated that the maximum fluorescence emission intensity decreased, and the maximum emission wavelength shifted towards blue as the power increased. Particle size, zeta potential, scanning electron microscopy (SEM), and differential scanning calorimetry (DSC) analyses showed that the average particle size of EWP reached the minimum value of 1203.66 nm, the absolute value of zeta potential reached the maximum value of 41.35 mV, and the thermal stability was strongest, with a more uniform and loose structure observed at 300 W. Texture profile analysis (TPA) showed that appropriate power treatment significantly enhanced the chewiness and viscoelasticity of egg white protein. Therefore, appropriate power treatment could effectively improve the emulsifying properties and stability.

Water filling of rapidly salted separated egg yolks: Characterization of water migration, aggregation behavior and protein structure

Water filling occurs during the rapid salting of separated egg yolks. The purpose of this study was to investigate the changes in water migration, protein aggregation and structures of the separated egg yolks salted with 20% salt solution over 24 hours to understand the principles of this phenomenon. The results showed that water filling occurred within 12 h. The hardness of the salted egg yolk increased significantly within approximately 0−6 h and then decreased significantly. The springiness and cohesiveness of the egg yolk did not change significantly during salting. With the appearance of water filling, the T23, A23, soluble protein content, free sulfhydryl content, β-turns, α-helices and maximum fluorescence intensity (FImax) increased; the T22, A22, disulfide bonds, β-sheets, irregular curls, maximum emission wavelength (λmax) and average particle sizes decreased. This work showed that water filling enhanced the hydrogen bonding between proteins and water and inhibited protein aggregation.

An oxygen-sensitive cyclometalated platinum(II) complex with a triphenylamine modified acetylacetone derivative

A cyclometalated Pt(II) complex [Pt(ppy)(TPA-dpa)] Pt2 with a triphenylamine (TPA) substituted diphenyl-1,3-propanedionate (dpa) as auxiliary ligand was designed and synthesized. The effects of the TPA moiety on the photophysical, electrochemical and oxygen sensing properties of the corresponding Pt(II) complex were systematically investigated compared with non-TPA-modified complexes [Pt(ppy)(dpa)] Pt1 and Pt(ppy)(acac). The maximum emission wavelength of Pt2 exhibits a notable redshift (71 nm) with respect to Pt(ppy)(acac). More importantly, the lifetime (25.52 µs) of Pt2 is significantly prolonged compared with those of Pt1 (0.32 µs) and Pt(ppy)(acac) (2.60 µs). Pt2 is highly sensitive to molecular oxygen when immobilized in an ethyl cellulose film. In addition, the oxygen sensing films have excellent reversibility during the quenching and recovering processes.

Rapid and sensitive fluorescence determination of oxytocin using nitrogen-doped carbon dots as fluorophores

In this work, a novel nitrogen (N)-doped carbon dots (N-CDs) was prepared with quercetin as the carbon source and o-phenylenediamine as the nitrogen source by hydrothermal synthesis, and their application as fluorophores for selective and sensitive determination of oxytocin were reported. The fluorescence quantum yield of the as-prepared N-CDs, which exhibited good water solubility and photostability, was about 6.45 % using rhodamine 6 G as reference substance, and the maximum excitation (Ex) and emission (Em) wavelength were 460 nm and 542 nm, respectively. The results illustrated that the direct fluorescence quenching of N-CDs fluorophore for the detection of oxytocin achieved good linearity in the range of 0.2–5.0 IU/mL and 5.0–10.0 IU/mL, the correlation coefficients were 0.9954 and 0.9909, respectively, and the detection limit was 0.0196 IU/mL (S/N = 3). The recovery rates were 98.8∼103.8 % with RSD= 0.93 %. The interference experiments showed that common metal ions, possible impurities introduced in production and coexisting excipients in the preparation had little adverse influence on selective detection of oxytocin by the developed N-CDs based fluorescent detection method. The mechanism study on the fluorescence quenching of N-CDs by oxytocin concentrations under the given experimental conditions demonstrated that there were internal filtration effect and static quenching in the system. The developed fluorescence analysis platform for the detection of oxytocin had been proved to be rapid, sensitive, specific and accurate, and to be used for the quality inspection of oxytocin.

Selective determination of ellagic acid in aqueous solution using blue-green emissive copper nanoclusters

Development of beneficial sensors to analyze ellagic acid concentrations is of great importance for food safety and human health. Herein, a facile and fast fluorescent probe was carried out for the excellently selective and sensitive measurement of ellagic acid in real samples through histidine protected copper nanoclusters (histidine@Cu NCs) as a nanosensor. This as-developed histidine@Cu NCs were performed through UV–vis absorption spectroscopy, fluorescence spectroscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy and fluorescence lifetime analysis. The TEM image revealed that this nanomaterial had spherical features with the average diameter of 2.5 ± 0.05 nm. The blue-green fluorescence of this Cu NCs was found under the UV light. Meanwhile, the maximum excitation and emission wavelength were located at 387 nm and 488 nm. After addition of ellagic acid, the fluorescence of histidine@Cu NCs was slowly weakened with excellent linear range of 0.5–300 μM and detection limit of 0.077 μM. The fluorescence weakening mechanism of this nanosensor were attributed to the inner filter effect (IFE) and static quenching. Finally, this as-established analysis platform was successfully employed to measure ellagic acid in real samples.

Comparative studies of plastic scintillator strips with high technical attenuation length for the total-body J-PET scanner

Plastic scintillator strips are considered as one of the promising solutions for the cost-effective construction of total-body positron emission tomography, (PET) system. The purpose of the performed measurements is to compare the transparency of long plastic scintillators with dimensions 6 mm × 24 mm × 1000 mm and with all surfaces polished. Six different types of commercial, general purpose, blue-emitting plastic scintillators with low attenuation of visible light were tested, namely: polyvinyl toluene-based BC-408, EJ-200, RP-408, and polystyrene-based Epic, SP32 and UPS-923A. For determination of the best type of plastic scintillator for total-body Jagiellonian positron emission tomograph (TB-J-PET) construction, emission and transmission spectra, and technical attenuation length (TAL) of blue light-emitting by the scintillators were measured and compared. The TAL values were determined with the use of UV lamp as excitation source, and photodiode as light detector. Emission spectra of investigated scintillators have maxima in the range from 420 nm to 429 nm. The BC-408 and EJ-200 have the highest transmittance values of about 90% at the maximum emission wavelength measured through a 6 mm thick scintillator strip and the highest technical attenuation length reaching about 2000 mm, allowing assembly of long detection modules for time-of-flight (TOF) J-PET scanners. Influence of the 6 mm × 6 mm, 12 mm × 6 mm, 24 mm × 6 mm cross-sections of the 1000 mm long EJ-200 plastic scintillator on the TAL and signal intensity was measured. The highest TAL value was determined for samples with 24 mm × 6 mm cross-section.

One-pot synthesis and fluorescent property of novel syringaldehyde α-aminophosphonate derivatives

Seven novel syringaldehyde α-aminophosphonate derivatives (1–7) were synthesized based on syringaldehyde together with different aryl amines and diethyl phosphite in a one-pot, solvent free, and catalyst free reaction. All of the obtained compounds were characterized by analysis of their 1H NMR and 13C NMR, IR spectra, and FT mass spectra. The UV and fluorescence emission spectra of 1–7 were investigated in the concentration range of 0.1–250 μM. As the results, the maximum emission wavelength of 1–7 was observed between 600 and 700 nm under the exciting wavelength of 250 nm for 1–5 and 300 nm for 6 and 7. The emission intensity is the strongest at a concentration of 60 μM for 2, 3, and 5–7, 30 μM for 1, and 0.1 μM for 4.

A fluorescent probe to simultaneously detect both O-GlcNAcase and phosphatase.

O-GlcNAc modification of proteins often has crosstalk with protein phosphorylation. These posttranslational modifications are highly dynamic events that modulate a wide range of cellular processes. Owing to the physiological and pathological significance of protein O-GlcNAcylation and phosphorylation, we designed the fluorescent probe, βGlcNAc-CM-Rhod-P, to differentially detect activities of O-GlcNAcase (OGA) and phosphatase, enzymes that are responsible for these modifications. βGlcNAc-CM-Rhod-P was comprised of a βGlcNAc-conjugated coumarin (βGlcNAc-CM) acting as an OGA substrate, a phosphorylated rhodol (Rhod-P) as a phosphatase substrate and a piperazine bridge. Because the emission wavelength maxima of CM and Rhod liberated from the probe are greatly different (100nm), spectral interference is avoided. The results of this study revealed that treatment of βGlcNAc-CM-Rhod-P with OGA promotes formation of the GlcNAc-cleaved probe, CM-Rhod-P, and a consequent increase in the intensity of fluorescence associated with free CM. Also, it was found that exposure of the probe to phosphatase produces a dephosphorylated probe, βGlcNAc-CM-Rhod, which displays strong fluorescence arising from free Rhod. On the other hand, when incubated with both OGA and phosphatase, βGlcNAc-CM-Rhod-P was converted to CM-Rhod which lacked both βGlcNAc and phosphoryl groups, in conjunction with increases in the intensities of fluorescence arising from both free CM and Rhod. This probe was employed to detect activities of OGA and phosphatase in cell lysates and to fluorescently image both enzymes in cells. Collectively, the findings indicate that βGlcNAc-CM-Rhod-P can be utilized as a chemical tool to simultaneously determine activities of OGA and phosphatase.

A fast and highly efficient strategy for discrimination and detection of three nitrophenol isomers

Novel catalysts of strongly coupled nickel-cobalt nitrides/carbon nanocage (NiCoN/C nanocages) with good water solubility and low cost are utilized to simultaneously catalytically reduce three nitrophenol isomers (2-NP, 3-NP and 4-NP) into corresponding aminophenol (2-AP, 3-AP and 4-AP) within nearly 5 min at room temperature. It is the first report that only one reagent (dopamine) can achieve fast discrimination of three nitrophenol isomers one by one. The reduced product of 3-NP (3-AP) can selectively form fluorescent substance with dopamine with maximum emission wavelength at 465 nm. The reduced product of 4-NP (4-AP) can selectively react with dopamine to form purple solution with absorption peak at 550 nm. It achieves fluorescent detection of 3-NP from 50 nM to 1.2 μM with the limit detections (LOD) of 17 nM for 3-NP, and colorimetric detection of 4-NP from 5 μM to 200 μM with LOD of 1.7 μM. It also realizes nitrophenol detection in tap water. When 0.30, 0.60, 1.00 μM 3-NP and 10, 50, 100 μM 4-NP are added to water samples, recoveries are 98.8–104.6% for 3-NP and 98.8–101.8% for 4-NP.

Surface-Defect-Involved and Eye-Visible Electrochemiluminescence of Unary Copper Nanoclusters for Immunoassay.

A single-stabilizer-capped strategy is proposed for achieving highly efficient and surface-defect-involved electrochemiluminescence (ECL) from unary copper nanoclusters (NCs) via employing l-cysteine (Cys) as a capping agent of luminophore. The Cys-capped CuNCs (Cys-CuNCs) can be electrochemically injected with valence band (VB) holes and exhibit eye-touchable ECL processes around +0.95 and +1.15 V upon employing TPrA as a coreactant. Both accumulated ECL spectra and spooling ECL spectra demonstrated that the two ECL processes are of the same single waveband and spectrally identical to each other with the same maximum emission wavelength of 640 nm. Promisingly, ECL of the Cys-CuNCs/TPrA system is obviously red-shifted for ∼150 nm to PL of Cys-CuNCs, indicating that the bandgap-engineered routes for ECLs of Cys-CuNCs are completely blocked. The oxidative-reduction ECL process of the Cys-CuNCs/TPrA system is a kind of highly efficient, eye-visible, and single-color emission in surface-defect-involved route. The capping agent of Cys can enable the CuNCs/TPrA system with a stronger ECL than other thiol capping agents, so that Cys-CuNCs are utilized as ECL tags for sensitive and selective immunoassays, which exhibit a wide linear response range from 0.05 pg/mL to 0.5 ng/mL and a limit of detection of 0.01 pg/mL (S/N = 3) with carcinoembryonic antigen as the analyte. Moreover, both the luminophore Cys-CuNCs and conjugates Ab2-CuNCs can be safely stored in aqueous media without any protector, which is promising for the evolution and clinic application of metal NC ECL in the surface-defect-involved route.

Microwave prepared nitrogen and sulfur co-doped carbon quantum dots for rapid determination of ascorbic acid through a turn off–on strategy

A simple and eco-friendly microwave method was applied for the preparation of highly fluorescent nitrogen and sulfur co-doped carbon quantum dots (NS-CQDs) and used for the determination of ascorbic acid (ASC) in pharmaceutical dosage forms. The prepared NS-CQDs had bright blue fluorescence at a maximum emission wavelength of 440 nm, after excitation with 350 nm, with a quantum yield of 62.5 %. The developed NS-CQDs were prepared from citric acid and l-cysteine in one minute. The native fluorescence of NS-CQDs was quenched by ferric ions due to the formation of non-fluorescent CQDs/ Fe3+ complex. The quenched fluorescence could be restored by the addition of ASC due to the reducing properties of ASC which converts Fe3+ to Fe2+. The method was found linear over the concentration range of 2.0–100 μg/mL, with a limit of detection was 0.6 μg/mL and a coefficient of determination of 0.9965. The proposed method was cross-validated and statistically compared with a reported HPLC method. The results indicated that the developed method was greener, according to the analytical eco-scale and the green analytical procedure index (GAPI). The prepared NS-CQDs were used for spectrofluorometric determination of ASC in pharmaceutical dosage forms, with percentage recoveries ranging between 98 and 102 %, and relative standard deviations less than 2 %. The method was easy, rapid, reliable, and sensitive and did not require expensive reagents or sophisticated equipment.