Maximum Cylinder Pressure Research Articles

The Coefficient of Reactivity and Activation Energy as the Criteria of Assessment of the Influence of Sustainable Aviation Fuels on Combustion Process in a Rapid Compression Combustion Machine and a Turbine Engine

Aviation in Europe is required to use fuels containing up to 2 wt. % of sustainable aviation fuels (SAFs). A better understanding of the impact of SAFs on the combustion process will be helpful in solving problems that may arise from the widespread use of these kinds of fuels. It was assumed that the reactivity coefficient αi and the activation energy could be a criteria for assessing the impact of SAFs on the combustion process. Based on DGEN engine tests, the following activation energy values of CO2 and CO formation reactions were obtained—Jet A-1: EaCO2/R=3480 and EaCO/R=982; A30: EaCO2/R=3705 and EaCO/R=2903; and H30: EaCO2/R=3637 and EaCO/R=2843. These results indicate differences in the structure of combustion reaction chains involved by the SAF addition to Jet A-1 fuel. The same conclusion has been formulated on the basis of the reactivity coefficient αi. The values of maximum cylinder pressure (Pmax) obtained during indicator RCCM (rapid compression combustion machine) tests correlated with both the activation energy and coefficients of reactivity. This suggests that the influence of SAF addition to Jet A-1 fuel on the structure of chemical reactions chain during RCCM tests is similar to the influence during DGEN 380 tests. The assumption stated above was confirmed. This indicates the possibility of the preliminary forecasting of CO2 and CO emissions from the DGEN 380 engine based on the test at the RCCM stand.

A full-scale CFD model of scavenge air inlet temperature on two-stroke marine diesel engine combustion and exhaust emission characteristics

Most ships in the maritime transport sector are equipped with large two-stroke marine diesel engines in their propulsion systems. Therefore, ensuring stable and long-term operation of these engines is crucial to maintaining freight transportation. The design of the ship's machinery, particularly the diesel engine, is a crucial step in achieving this goal. Computational Fluid Dynamics (CFD) tools can be used to achieve this goal. This article presents a full-scale CFD study on the effect of different scavenge air inlet temperatures (300, 312, 330 and 340 K) on the combustion process and generation of exhaust emissions in a two-stroke marine diesel engine using ANSYS Forte software. Regarding the cylinder pressure, the presented model agrees well with experimental data. The maximum cylinder pressure decreases as the scavenge air inlet temperature increases, whereas the maximum cylinder temperature increases as the scavenge air inlet temperature increases. The maximum NOX, CO and UHC emission values are calculated to be 2256.5, 20375.8 and 3743.9 ppm, respectively, at a scavenge air inlet temperature of 340 K. Due to the higher combustion temperature caused by the increasing scavenge air inlet temperature, it is observed that the exhaust emission levels increase.

An experimental investigation on performance, emission and combustion characteristics of IC engine using liquid fuel produced through catalytic co-pyrolysis of pressed oil cake and mixed plastics with the addition of nanoparticles

The study focuses on using a combination of diesel and a liquid fuel derived from the co-pyrolysis of pressed neem cake (PNC) and mixed waste plastics (MWP) containing waste polyethylene terephthalate (PET) and low density polyethylene (LDPE) in equal amounts with the help of cupric oxide (CuO) catalyst. The engine analysis was carried out using diesel and five different blends of co-pyrolysis oil with diesel in proportions of 20 % (20 % pyrolysis oil + 80 % diesel = PD20), 40 % (PD40), 50 % (PD50) and 100 % pyrolysis oil (PD100), respectively. Initially, the co-pyrolysis oil was produced using PNC and MWP in a ratio of 1:2 under different operating temperatures between 350 °C and 650 °C. The process temperature was optimized to yield maximum liquid oil, and the characterization study was performed. In addition to that, CeO2 nanoadditives were used to improve the properties of PD20 fuel. Different dosages of nanoadditives were blended with PD20 to prepare PD20@25 (PD20 + 25 ppm CeO2), PD20@50, PD20@75, and PD20@100. The objective of the study is to assess the performance, emission, and combustion characteristics of a diesel engine utilizing co-pyrolysis oil-diesel blend by including the nanoadditives. The analysis was carried out on a single-cylinder water-cooled diesel engine mounted with an eddy current dynamometer. The experiments demonstrated that the combination of PD20 and 50 ppm CeO2 resulted in a 6 % increase in thermal efficiency when compared to other blended fuels and diesel. When compared to all fuels, the PD20@50 produced a higher decrease in CO and HC emissions by roughly 30 and 6.2 %, respectively. The combustion analysis showed that the heat release rate (HRR) and maximum cylinder pressure were also found to have improved by adding nanoparticles.

Understanding the role of methanol as a blended fuel on combustion behavior for rotary engine operations

Methanol, being one of the most promising carbon-neutral fuels, has the potential to enhance the fuel mixture homogeneity of gasoline rotary engines, thereby improving engine performance. This study, based on computational fluid dynamics model, investigates the in-cylinder flow, combustion, and emission characteristics under various methanol blending ratios, ignition timings, and equivalence ratios. At the methanol energy blending ratio of 10 %, a more extensive and efficient operating range is observed across different ignition timings and equivalence ratios, attributed to the higher diffusion and combustion rates. An increase in in-cylinder temperature enhances the complete conversion of HC. However, higher proportions of methanol are disadvantageous for the combustion process due to methanol's lower heat value and higher latent heat of vaporization. Thus, the optimal ignition timing was determined to be 30°EA BTDC. At this optimal ignition timing, the cylinder shows higher average turbulent kinetic energy and radical content compared to the ignition timing at 50° EA BTDC. Specifically, the concentrations of OH, H, and O free radicals increase by 12.40 %, 14.77 %, and 13.91 % respectively, leading to more complete initial flame kernel expansion. It is notable that emissions of CO, HC, and NOx are all reduced. The study further explores the influence of the equivalence ratio on the combustion process. At an equivalence ratio of 0.9, there is an earlier peak in the maximum cylinder pressure rise rate and the highest generation of O and OH, with a shorter main combustion period and concentrated heat release. This achieves economically viable operation for rotary engines, indicating a 2.122 % improvement in thermal efficiency and a reduction in fuel consumption to 375.537 g kW−1 h−1.

The role of charge reactivity in ammonia/diesel dual fuel combustion in compression ignition engine

This study investigates the combustion characteristics of diesel–NH3–air mixture in compression ignition engine. Three different levels of ammonia energy ration (AER) were used for the investigation: 0 % AER (pure diesel), 30 % AER, and 50 % AER. Increasing AER leads to a rise in the initial peak of apparent heat release rate and promotes the prevalence of premixed combustion. Numerical simulations effectively capture the abrupt increase in maximum cylinder pressure (Pmax) from 7.4 to 7.9 MPa as AER increases from 0 to 30 %. Additionally, raising AER from 0 to 30 % extends a high-temperature region externally in the squish zone, attributed to the higher knocking propensity of the 30 % AER premixed charge. The ammonia-assisted diesel accomplish advanced diesel direct injection timing (SOID) at both heavy and medium load conditions. Under light load conditions, an increase in ITE is observed for AER = 50 % as SOID varies from −4 °CA to −10 °CA (ATDC). For medium and high load conditions, ITE monotonically increases with advancing SOID. The maximum ITE of 44.5 % is achieved at SOID = −12 °CA (ATDC) and AER = 30 %.

Directional synthesis and application of long-chain ethers from biomass-derived carbonyls

The work introduced an innovative pathway for converting biomass-derived carbonyls into long-chain ethers, examining their low-temperature oxidation in a modified Cooperative Fuel Research (CFR) engine. The conversion of 2-butanone achieved 100 % and the selectivity of sec-butyl isopropyl ether reached the maximum of 83.13 % under optimal reaction conditions. Conversion of biomass-derived carbonyls increased from 31.77 % at 1 h to 36.28 % at 12 h, with the mass yield of long-chain ethers rising from 53.94 % to 62.86 %. At the same compression ratio, the maximum in-cylinder pressure and temperature increased as the long-chain ethers blending ratio increased. At the critical compression ratio, the net heat release rates (NHR) for blended fuels with 10 vol%, 20 vol% and 30 vol% long-chain ethers at the low-temperature heat release peak were 9.6 J/deg, 10.1 J/deg, and 10.0 J/deg better than that of n-heptane (6.3 J/deg), respectively. CO emissions from blended fuels before compression ignition were higher than n-heptane, while the value for the blended fuel with 30 vol.% long-chain ethers was reduced by 44.97 % compared to n-heptane after autoignition.

Investigation of The Effects of BD35 (Biodiesel/Diesel Blend) and Propanol Usage in Combustion Characteristics in A Dual Fuel Diesel Engine

This study investigates the changes in the combustion characteristics of a diesel engine modified to operate in reactivity controlled compression ignition mode using propanol as low reactivity fuel and BD35 as high reactivity fuel. In the study, BD35 fuel, a blend of 35% biodiesel and 65% petroleum-derived diesel, was sprayed directly into the cylinder as a high reactivity fuel, while propanol was sprayed into the intake manifold at low pressure as a low reactivity fuel for reactivity controlled compression ignition. Four different low reactivity fuel premixed ratios of 0%, 15%, 30% and 45% propanol were used in the experiments. The experiments were carried out under 60% engine load and 2400 (rpm) constant engine speed conditions. According to the data obtained, it was found that the maximum in-cylinder pressure value increased with the increase in the premixed ratio and a significant increase occurred especially when 45% premixed ratio was used. Although the use of propanol as low reactivity fuel in the test engine under the reactivity controlled compression ignition concept was observed to cause a decrease in the indicated mean effective pressure, the rate of decrease in the indicated mean effective pressure was found to slow down as the premixed ratio increased. Finally, it was found that the in-cylinder gas temperature decreased significantly with increasing the propanol premixed ratio. When all the findings are analyzed, it has shown an important way to understand the effects of propanol as low reactivity fuel and BD35 as high reactivity fuel on engine performance at high load in diesel engines modified to operate in reactivity controlled compression ignition mode.

The effect of fusel oil and waste biodiesel fuel blends on a CI engine performance, emissions, and combustion characteristics

In this study, experimental engine tests were conducted to investigate the combustion, performance, and emission characteristics of a diesel engine using a fuel blend composed of diesel, biodiesel, and fusel oil. In the study, which was carried out by using fuels obtained from different wastes together in a diesel engine. Seven different fuels were prepared for experiments by adding waste cooking oil (30% and 50%) and fusel oil (5% and 10%) by volume to commercial diesel fuel. The tests were carried out on the Lombardini LDW 1003 engine, a three-cylinder diesel engine, at four different engine loads (10, 20, 30, and 40 Nm), and a constant speed (2000 rpm). The experimental results revealed that the use of WCO generally led to increased NOx emissions which generally decreased with the fusel oil addition to the fuel mixture. Considering diesel fuel as a reference at maximum load conditions, there was a 12.63% increase in NOx emissions with 50% WCO. A 2.45% decrease in NOx emissions was achieved by adding 10% fusel oil. Furthermore, HC emissions decreased with the addition of both fusel oil and WCO at all load levels. When diesel fuel is taken as a reference at maximum load conditions, a 90% reduction in HC emissions was achieved by adding 50% WCO, and a 50% reduction in HC emissions was achieved by adding 10% fusel oil. Additionally, when diesel fuel is taken as a reference at maximum load condition, it was observed that a 0.05% increase in the maximum cylinder pressure value with the addition of 50% WCO and a 2.09% increase in the maximum cylinder pressure value with the addition of 10% fusel oil.

Synergistic effect of hydrogen induction on the performance, combustion and emission phenomenon of dual-fuel CI engine with Chlorella vulgaris algae oil and its methyl ester

The present work aims to investigate the cumulative effect of hydrogen enrichment with the fuels of diesel, Neat chlorella vulgaris oil (NCVO), and Chlorella vulgaris methyl ester (CVME) in a mono-cylinder CI engine. The performance, combustion, and emission parameters of diesel, NCVO, and CVME are analyzed and compared to the findings obtained with hydrogen induction in the intake manifold under dual fuel configuration. With the effect of hydrogen infusion, the metrics of performance, combustion and emission parameters are improved. Under maximum load condition, the induction of hydrogen escalates the BTE from 32.74%, 28.01%, and 23.02%–35.39%, 31.40%, and 28.12% with diesel, CVME, and NCVO at maximal hydrogen share energy of 14.38%, 11.50% and 9.61% respectively. Alongside, the enrichment of hydrogen declines the carbon monoxide (CO) from 4.13, 10.38, and 19.24 g/kWh to 3.16, 8.02, and 15.26 g/kWh, unburned hydrocarbons (UHC) from 0.51, 0.71, and 2.02 g/kWh to 0.36, 0.50, and 1.64 g/kWh, smoke opacity from 55%, 75%, and 85%–43%, 67%, and 71% with diesel, CVME, and NCVO respectively. However, the hydrogen's significant flame velocity and immense calorific value confect to an elevated combustion temperature and subsequent rise in heat release rate (HRR) to, cylinder pressure, and emission of nitrogen oxide (NO). Among the tested fuels, diesel posses maximum HRR and cylinder pressure of 80.46 J/0CA and 88.67 bar respectively. Maximum specific NO emission was observed with CVME having 10.80 g/kWh, whereas diesel and NCVO has 9.49 g/kWh and 4.93 g/kWh respectively.

Prediction of the Performance and emission characteristics of diesel engine using diphenylamine Antioxidant and ceria nanoparticle additives with biodiesel based on machine learning

This study explores the impact of incorporating antioxidants diphenylamine (DPA) and nanoparticle ceria (CeO2) into Jatropha biodiesel (B30) blend on engine performance and exhaust emissions. The fuel blends utilized in this study consists of diesel, B30, B30 with 100 ppm of antioxidant diphenylamine (B30+DPA100), and B30 with 50 ppm of antioxidant diphenylamine and 50 ppm of nanoparticle ceria (B30+DPA50+CeO250). The experiments were designed using the design of experiment methodology, and they were conducted using various fuels to assess both engine performance and exhaust emissions characteristics. Further, machine learning algorithms (multilayer perceptron, random forest regression, and K-nearest neighbors) has been employed to develop a model for accurately predicting experimental outcomes. The K-nearest neighbors model surpassed the multilayer perceptron and random forest regression models, demonstrating a higher coefficient of determination value and precise outcome predictions. The experimental results reveal that adding antioxidants diphenylamine and nanoparticles ceria at 50 ppm to B30 significantly reduced nitrogen oxides emissions. Compared to B30, B30+DPA50+CeO250 showed a 6.35 % decrease in brake specific fuel consumption and an 8.68 % reduction in nitrogen oxides emissions. However, there was a slight increase of 5.74 % in brake thermal efficiency. Additionally, B30+DPA50+CeO250 exhibited a 2.54 % reduction in maximum cylinder pressure compared to B30.

Optimizing soybean biofuel blends for sustainable urban medium-duty commercial vehicles in India: an AI-driven approach

This article presents the outcomes of a research study focused on optimizing the performance of soybean biofuel blends derived from soybean seeds specifically for urban medium-duty commercial vehicles. The study took into consideration elements such as production capacity, economics and assumed engine characteristics. For the purpose of predicting performance, combustion and emission characteristics, an artificial intelligence approach that has been trained using experimental data is used. At full load, the brake thermal efficiency (BTE) dropped as engine speed increased for biofuel and diesel fuel mixes, but brake-specific fuel consumption (BSFC) increased. The BSFC increased by 11.9% when diesel compared to using biofuel with diesel blends. The mixes cut both maximum cylinder pressure and NOx\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{\ ext{NO}}}_{{\ ext{x}}}$$\\end{document} emissions. The biofuel-diesel fuel proved more successful, with maximum reduction of 9.8% and 22.2 at rpm, respectively. The biofuel and diesel blend significantly improved carbon dioxide (CO2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${{\ ext{CO}}}_{2}$$\\end{document}) and smoke emissions. The biofuel blends offer significant advantages by decreeing exhaust pollutants and enhancing engine performance.Graphical

Freight train air brake modelling with emergency valves

The 120-type air brake system is unique around global rail industry and critical for Chinese freight train operation. Existing research about its simulations does not include detailed models for the emergency brake valves. This paper filled this research gap by developing a detailed fluid dynamic air brake system with a focus on the emergency brake valve. The working principle of the emergency brake vale was reviewed. The brake system model was based on gas flow governing equations (mass and momentum) and orifice flow equations. The model was validated by comparing with measured data from a 150-wagon train. Four braking scenarios were compared. The simulated maximum cylinder pressure was only 5 kPa out of the range of the measured data. The maximum difference regarding the time when cylinder pressure reaches maximum pressure was 4 s. The simulation results have also shown variable switch pressure points for the two-stage brake valve. This is agreed by the measured results and was not shown in previously published research.

Performance and emission analysis of hydrogen-fuelled compression ignition engine with EGR: a prospective approach towards clean mobility

The energy demand has still been fulfilled, primarily by fossil fuels globally. Hydrogen is the only carbonless fuel that can fulfil the energy demand without impacting the environment. In this research work, a variable compression ratio (VCR) CI engine with exhaust gas recirculation (EGR) is tested with hydrogen gas as a primary fuel. Initially, the diesel is used as a pilot fuel igniter to initiate the combustion process. Once the cycle is initiated, the hydrogen gas is supplied and controlled through port fuel injection at a pressure of 2 bar. The engine is operated at various compression ratios (12, 14, 16, 18) and different loads: 0% (0 kg), 25% (4 kg), 50% (8 kg), 75% (12 kg) and full load (16 kg), with and without exhaust gas recirculation. The results revealed that the brake thermal efficiency of the hydrogen-fuelled engine increased by 6.5% and a significant decrement in brake-specific fuel consumption (bsfc). The maximum cylinder pressure inside the cylinder is observed at 68 bar at 12 kg of load and 18 CR. The NOx emission is reduced by 49.4% by using the cold ERG method.

Aspects of combustion in diesel engine at hydrogen use-a theoretical approach

The use of alternative fuel may be a viable solution in order to ameliorate the engine performance especially in terms of pollutant emissions. Among the alternative fuels that can be use to fuel internal combustion engines hydrogen can be a viable alternative fuel especially due to the advantage of reducing the carbon emission at its use as alternative fuel even for partial substitution of classic fuel. Hydrogen has good combustion properties like higher Lower Heating Value, large inflammability limits, higher combustion speed, which may has a benefic influence on combustion process. The use of hydrogen to diesel engine bring few important issues that must be solved in order to assure the normal engine operation, starting with the fuelling system and engine with the control of the combustion process. The paper presents some results obtained during the theoretical modeling of the in-cylinder process at a diesel engine fuelled with classic fuel and hydrogen. The diesel fuel is energetically substituted by hydrogen in percent’s of 25% and 30%. The influences of hydrogen use on in-cylinder maximum pressure, maximum pressure rise rate, heat release rate, combustion temperature, indicated thermal efficiency and nitrogen oxides and smoke emission levels are shown and analyzed.

Optimizing combustion and emissions in natural gas/diesel dual-fuel engine with pilot injection strategy

For the clean and efficient operation of agricultural power, a non-road common-rail engine was modified to achieve natural gas/diesel dual-fuel (NDDF) combustion mode. Under low load conditions, NDDF combustion deteriorates and fuel economy decreases due to lower pressure and temperature inside the cylinder. Therefore, effects of injection pressure, pilot injection timing (SOIpilot) and pilot injection quantity (Qpilot) on in-cylinder combustion, emission characteristics and fuel economy of NDDF engine with pilot injection strategy were investigated at low load. Results show that with the increment of injection pressure, the diesel fuel beam penetration distance increased, prompting the diesel more quickly and fully mixed with fresh charge. The maximum in-cylinder pressure increased, the combustion center (CA50) moved forward, the ignition delay period was shortened, and soot, HC, C2H4 and C3H6 emissions were reduced, while BTE was improved. When SOIpilot moved forward, the pilot injected diesel and natural gas were more fully mixed, which promoted the generation of activation radicals and combustion intensity of main injected diesel. Pmax first increased and then decreased, the peak value of first heat release rate (HRRP1) gradually decreased, the peak value of second heat release rate (HRRP2) continuously increased, the combustion duration decreased, and the soot, CO and HC emissions decreased. At SOIpilot = −30 °CA ATDC, unregulated emissions reached the lowest level, while BTE was 35.55 %. With the increment of Qpilot, both Pmax and HRRP1 increased, CA05 and CA50 moved forward, combustion duration was extended, COV decreased significantly, and all emissions except NOx decreased, especially aldehyde emissions.

Production of biofuel from AD digestate waste and their combustion characteristics in a low-speed diesel engine

Anaerobic digestion biogas plants generate large amounts of digestate that cannot always be valorised as fertilizer. This study proposes an alternative use through pyrolysis of the digestate for the production of liquid fuels for compression ignition engines. The digestate pyrolysis oil (DPO) and two types of biodiesel were produced and mixed with different alcohols. A total of five blends of DPO, biodiesel and alcohol were prepared and characterized, showing that their acidity and viscosity were higher than for pure diesel, and their heating value was lower. Blends containing 60 % biodiesel, 20 % DPO, and 20 % butanol were then tested in an engine, showing that the maximum in-cylinder pressure and heat release rate were 4.6 % and 3 % lower, respectively, compared to diesel, and the engine thermal efficiency at full load was 6–8% lower. The nitric oxide and smoke emissions were 7 % and 40 % lower, respectively, but the carbon dioxide emissions were 7–10 % higher than with diesel. The blends showed retarded start of combustion by 1.5° crank angle, which delays the ignition by about 6.4 %. This study concludes that blends can be used as a fuel for agriculture and marine diesel engines, although their viscosity should be reduced by improving the pyrolysis conditions.

Diesel-natural gas dual fuel injection strategy effects on engine ignition delay and cylinder pressure evolution

Diesel pilot high-pressure direct injection (HPDI) natural gas technology has been noticed and applied in medium and heavy-duty engines due to its outstanding economy and power performance. However, the combustion of two kinds of fuels will involve more injection parameters, which increases the difficulty of designing injection strategy and calibrating injection parameters. This paper investigates comprehensively the effects of three key engine injection parameters (injection timing, injection duration of the pilot diesel, interval of injection between diesel and natural gas) on the engine ignition delay and cylinder pressure evolution using the experimentation method, which are utilized to guide the design of injection strategy and optimize injection parameters. Results show that the maximum in-cylinder pressure and its position are determined by the injection timing of natural gas, but little affected by the injection parameters of diesel. As the injection timing advances and the duration of diesel injection shortens, the ignition delay increases. To avoid rough combustion in the cylinder, it is necessary to optimize the injection timing, injection interval, and ignition diesel injection duration to ensure that the pressure rise rate does not exceed the threshold.

Experimental analysis of the effect of hydrogen as the main fuel on the performance and emissions of a modified compression ignition engine with water injection and compression ratio reduction

This study aimed to investigate the combined effects of compression ratio (CR), start of injection angle (SOI) and water injection (WI) on the performance, including NOx emissions, of a modified turbocharged compression ignition engine using H2 as the primary fuel and diesel solely as a pilot ignition source. WI and H2 were both injected into the intake manifold just after the charge heat exchanger. Test conditions varied the engine speed from 1500 rpm to 2750 rpm, covering a wide range of the original engine's operating conditions, water mass flow varied from 0 to 0.795 g/cycle and SOI for pilot ignition was studied in the range 10°, 5°, 0° before top dead center. Subsequently, the study examined the combined effect of reducing the engine's CR from 17.5:1 (base) to 13.5:1, in one-point increments, reducing SOI and water addition to further enhance the hydrogen energy share (HES).HES varied from 0 % to 85 % under different engine conditions, and WI and SOI were employed to prevent knocking and ensure that the maximum combustion pressure did not exceed 160 bar. The test results indicate that NOx emissions increase with HES, but reducing the CR results in a reduction in NOx emissions of approximately 50 %. Additionally, WI further reduces NOx emissions by up to 50 %. The experimental evidence demonstrates that combining WI with CR and SOI reduction can effectively lower NOx emissions, achieving an efficiency greater than 35 % and therefore approaching the base diesel mode's efficiency. This also reduces the maximum in-cylinder pressure, allowing for an increase in turbocharger pressure and consequently enhancing the engine's specific power. The maximum engine power achieved was 31.6 kW at 2500 rpm (mean effective pressure of 10.1 bar), with a CR of 15.5, SOI at 10°, 1.5 kg/kWh of water, a HES of 81 %, and a minimum NOx level of approximately 480 ppm, with a maximum combustion pressure below 120 bar.

A sustainable model using RSM and MCDM techniques to evaluate performance and emission characteristics of a diesel engine fueled with diphenylamine antioxidant and CeO2 nanoparticle additive biodiesel blends

Overconsuming fossil fuels has worsened global warming and air pollution, requiring us to investigate alternate fuels for compression ignition engines. Biodiesel is a renewable fuel and environmentally favorable. Biodiesel's most significant disadvantage is increased nitrogen oxide (NOx) emissions. The intent of the present study was to examine the impact of antioxidant diphenylamine (DPA) and nanoparticle ceria (CeO2) additive inclusion in a B30 blend on engine performance and exhaust emission characteristics. For this study, diesel, Jatropha biodiesel (B30), 100 ppm of antioxidant diphenylamine (50 ppm) with ceria nanoparticle (50 ppm) is added to the B30 blend named as B30+DPA100 and antioxidant diphenylamine (50 ppm) with ceria nanoparticle (50 ppm) is added to the B30 blend named as B30+DPA50+CeO250 fuel blends has been used. A hybrid response surface methodology and multi-criteria decision-making techniques (entropy method, TOPSIS, and VIKOR) have been used to develop a sustainable model and find the optimal setting of input parameters in terms of ranking. From experimental findings, the inclusion of antioxidants (DPA) and nanoparticle (CeO2) at 50 ppm to B30 significantly reduced NOx emission. The brake-specific fuel consumption and NOx have been found reduced by 5.67% and 18.87%, respectively, for B30+DPA50+CeO250 as compared to B30. At the same time, brake thermal efficiency increased by 1.01%. The brake mean effective pressure and maximum cylinder pressure) have been found increased by 0.68% and reduced by 4.52%, respectively, for B30+DPA50+CeO250 as compared to B30. The alternative ranking of the input parameters has been found fuel injection pressure (300), compression ratio (17), and load (12) as Rank 1 for TOPSIS and VIKOR. Therefore, the B30+DPA50+CeO250 blend is appropriate for improving diesel engine performance and diminishing exhaust emissions.

Combustion cycle-to-cycle variations of opposed-piston two-stroke gasoline direct injection engine

The combustion characteristics and cycle-to-cycle variations of opposed-piston two-stroke (OP2S) gasoline direct injection (GDI) engine are investigated with experiment. The effects of engine speed on the combustion process and cycle-to-cycle variations are discussed. This paper chooses the indicated mean effective pressure, the maximum cylinder pressure and the maximum pressure rising rate to characterize the combustion cycle-to-cycle variations. The heat release rate of OP2S-GDI engine is in accordance with the conventional gasoline engine, which is divided into flame developing period, rapid burning period and after burning period. With the increase of engine speed, the maximum combustion pressure and maximum pressure rise rate decrease, and the time corresponding to the maximum in-cylinder pressure is delayed. The pressure rise rate associated with different engine speeds all show an increasing trend, with maximum values less than 0.2 MPa/°CA. The peak value of instantaneous heat release rate in the combustion process decreases and the combustion amount in the post-combustion period increases as the engine speed increases. The cycle-to-cycle variation rate of indicated mean effective pressure (IMEP) increases as the engine speed increases. The maximum IMEP cycle-to-cycle variation rate is 6.101% at 4000 rpm, which is less than the traditional gasoline engine cycle-to-cycle variation rate (10%). The cycle-to-cycle variation rate of the maximum cylinder pressure ( pmax) increases as the engine speed increases. The pmax cycle-to-cycle variation rate is 1.083% at 4000 rpm, which is less than traditional gasoline engine cycle-to-cycle variation rate (2%). The R ( pmax, pi) is weakly correlated at 2000 rpm and uncorrelated at 3000 rpm and 4000 rpm. The R( θ( pmax), pi) is strongly correlated at 3000 rpm and uncorrelated at 2000 rpm and 4000 rpm. The cycle-to-cycle variation rate of the maximum pressure rise rate (d p/d φ) is 7.406%%, 7.919% and 7.667% respectively at 2000 rpm, 3000 rpm and 4000 rpm. The R ((d p/d φ) max, pi) is weakly correlated at different engine speed, the R( θ(d p/d φ) max, pi) is moderately correlated at 2000 rpm and positive correlation at 3000 rpm and 4000 rpm.