Maximum Contaminant Level Research Articles

Point-of-use chlorine residuals and disinfection byproduct occurrences in rural households served by public water utilities in Appalachian Virginia

ABSTRACT We characterized concentrations of trihalomethanes (THMs), a measure of disinfection byproducts (DBPs), in tap water samples collected from households with utility-supplied water in two rural counties in Appalachian Virginia, and assessed associations with pH, free chlorine, and metal ions which can impact THM formation. Free chlorine concentrations in all samples (n = 27 homes) complied with EPA drinking water guidelines, though 7% (n = 2) of first draw samples and 11% (n = 3) of 5-min flushed-tap water samples exceeded the US Safe Drinking Water Act (SDWA) maximum contaminant level (MCL) for THM (80 ppb). Regression analyses showed that free chlorine and pH were positively associated with the formation of THM levels above SDWA MCLs (OR = 1.04, p = 0.97 and OR = 1.74, p = 0.79, respectively), while temperature was negatively associated (OR = 0.78, p = 0.38). Of the eight utilities serving study households, samples from water served by three different utilities exceeded the EPA MCL for THM. Overall, these findings do not indicate substantial exposures to DBPs for rural households with utility-supplied water in this region of southwest Virginia. However, given the observed variability in THM concentrations between and across utilities, and established adverse health impacts associated with chronic and acute DBP exposure, more research on DBPs in rural Central Appalachia is warranted.

PHREEQ C Modelling Tool Application to Determine the Effect of Anions on Speciation of Selected Metals in Water Systems within Kajiado North Constituency in Kenya

Heavy metals and anions in water pose a significant risk to living organisms, including humans, and must therefore be carefully monitored. There are numerous approaches and methods of analysis to choose from. Using the PHREEQ C chemical modeling technique, this study looked at the effect of certain anions on the speciation of selected metals in the water environment of Kajiado North. Twenty-five sampling points were used in the study, which covered five Kajiado North election wards. Samples were taken twice during the dry and rainy seasons, in November 2019 and March 2020. Using standard methods, physicochemical characteristics were analyzed, concentrations of selected heavy metals using the (ICP- OES) 7000 series, and selected anions using a multi parameter photometer, their concentration values compared to the specified maximum contaminant level and speciation analysis done using the Computer-based technique PHREEQ C. The range observed for pH, temperature, electrical conductivity, sulphate, chloride, fluoride, nitrate and carbonates was 7.43- 9.30, 23.0 -28.0oC, 335-1265μS/cm, 4.54-361.41mgL-1, 5.19-184.6 mgL-1, 0.01-2.90 mgL-1, 0.1-8.6 mgL-1, and 3.18-55.19 mgL-1 respectively. The range observed for heavy metals was 0.06-1.08 mgL-1 , 0.00 -0.05082 mgL-1, 0.01-0.02597 mgL-1, 0.01-0.01610 mgL-1, 0.00 -0.0327 mgL-1, 0.00-42.7842 mgL-1, and below detection limit, for Fe, Mn, Cu, Zn, Pb, Mg, and Cd respectively. The findings revealed that Cd, Zn, Cu, Cl-, NO2-, and eElectrical cconductivity concentrations were below the WHO levels. At certain sampling points, however, SO42-, F-, Pb, Fe, and Mn were above WHO limits. In some water systems, traces of SO42-, F-, Cu, Fe, Cd, and Mn were found to pose significant health risks, according to PHREEQ C speciation analysis. Anion concentrations, pH, temperature, and metal concentrations are all important variables in modeling. Metals formed anion complexes and the total abundance of metal species was classified at the highest levels as Fe(OH)3, PbCO3, Zn(CO3)2, Cu(CO3)2, Mn+2, MgF-, and Mg+2. At a water system temperature of 25oC without anions, it was found to have the highest chemical species. CuCO3, CuNO3, and CuOH+ complexes are also formed at low pH. Based on the data for different metal species at different pH values, the bioavailability of metal species definitely depends on pH.

Exploring Endogenous Processes in Water Supply Systems: Insights from Statistical Methods and δ18O Analysis

Water used for water supply undergoes numerous changes that affect its composition prior to entering the water supply system (WSS). Once it enters the WSS, it is subject to numerous influences altering its physical and chemical composition, redox potential, and microbial quality. Observations of water quality parameters at different locations within the WSS indicate that it is justified to assume that these processes take place from the source to the end user. In this study, we used the results of routine everyday analyses (EC, T, pH, ORP, chloride, nitrate, nitrite, ammonium, and bacteria) supplemented by experimental data from a one-year sampling campaign assessing the main cations and anions and stable isotopes δ2H and δ18O. Through these data, the statistical significance of the differences between the concentrations of the basic water quality parameters among different WSS locations was determined, together with the water retention time in the system. The results indicate minor changes in water chemical composition within the observed WSS, remaining below the prescribed Maximum Contaminant Level (MCL) for human consumption. However, factors such as water retention time, CaCO3 deposition, pH fluctuations, and bacterial growth may influence its suitability, which necessitates further investigation into potential risks affecting water quality.

Arsenic Treatment Using Electrolytic Ferrous Reagent to Replace Bulk Ferric Chloride

Key TakeawaysAs federal maximum contaminant level (MCL) recommendations for arsenic in drinking water are being reviewed, US utilities are preparing for more stringent regulations.If faced with reducing its treated water's arsenic concentration to 5 μg/L, the City of Alamosa, Colo., would need to increase its ferric chloride dose—raising supply, cost, and operational concerns.To avoid these issues, the city explored a new technology that generates a ferrous reagent via an in situ electrolytic process to replace bulk ferric chloride.The electrolytic ferrous reagent removed arsenic to below 5 μg/L, reduced permeate manganese levels, and improved effluent quality with a far lower coagulant dose.

Mycotoxin contamination in organic and conventional cereal grain and products: A systematic literature review and meta-analysis.

There is still considerable controversy about the relative risk of mycotoxin exposure associated with the consumption of organic and conventional cereals. Using validated protocols, we carried out a systematic literature review and meta-analyses of data on the incidence and concentrations of mycotoxins produced by Fusarium, Claviceps, Penicillium, and Aspergillus species in organic and conventional cereal grains/products. The standard weighted meta-analysis of concentration data detected a significant effect of production system (organic vs. conventional) only for the Fusarium mycotoxins deoxynivalenol, with concentrations ∼50% higher in conventional than organic cereal grains/products (p<0.0001). Weighted meta-analyses of incidence data and unweighted meta-analyses of concentration data also detected small, but significant effects of production system on the incidence and/or concentrations of T-2/HT-2 toxins, zearalenone, enniatin, beauvericin, ochratoxin A (OTA), and aflatoxins. Multilevel meta-analyses identified climatic conditions, cereal species, study type, and analytical methods used as important confounding factors for the effects of production system. Overall, results from this study suggest that (i) Fusarium mycotoxin contamination decreased between the 1990s and 2020, (ii) contamination levels are similar in organic and conventional cereals used for human consumption, and (iii) maintaining OTA concentrations below the maximum contamination levels (3.0μg/kg) set by the EU remains a major challenge.

Arsenic removal by layered double hydroxides (LDH): A mini review

ABSTRACT The World Health Organization (WHO) has classified arsenic as the most toxic chemical with carcinogenic effects and WHO has established a value of 10 μg/L arsenic as the maximum contaminant level for arsenic in potable water. High selectivity and high removal capacity are one of the most important factors when choosing an adsorbent. Hydrotalcite and hydrotalcite-like compounds have received much attention for the remediation of As-contaminated waters. The most interesting properties of layered double hydroxides (LDHs) include a large surface area and high anion exchange capacity. In this study, the importance of double-layered hydroxides, which has gained importance with the increasing environmental pollution recently, in removing oxyanion pollutants from water has been emphasized. This review article focuses on LDH synthesis and characterization techniques and arsenic removal potential using LDHs, as well as the safe consumability of water obtained after removal. In this review, various factors such as pH, dosage, and temperature that affect oxyanion adsorption on LDHs are discussed. The reusability of LDHs has been discussed. In addition, it has been investigated whether double-layer hydroxides (FeHT) could be used successfully in the removal of arsenic from polluted waters. It was also discussed whether the adsorbent used was safe for health.

Determination Of Heavy Metals and Radon Concentration in Soil and Water Samples from Wadi-B Jere Oil Exploration Sites in Maiduguri, Northeast Nigeria

Radon gas and heavy metals are two significant risk factors that can cause lung cancer. Wadi B, a locality in Jere local government of Borno state, is an area where oil exploration is underway. There is a potential health risk of contamination of the drinking water and soil samples in the area. To investigate radon concentration and heavy metal contamination, several samples of water from wells and boreholes, as well as soil samples, were collected for analysis. The analysis was conducted using liquid scintillation (LSC) and atomic absorption spectrometry. The result of radioactivity analysis using LSC shows that water samples have varying levels of radon concentration ranging from 17.77 Bql-1 to 22.50Bql-1 which exceeded the maximum contaminant levels of 11.1Bq/L set by the USEPA 1999 and the world average value of 10Bq/L set by the World Health Organisation (WHO 2004). The mean annual effective cancer risk of radon intake varied across sampling points, ranging from 0.164, 0.246, 0.287 to 0.130, 0.218, and 0.227 for adults, children, and infants, respectively, with mean values of 0.146, 0.219, and 0.255. The mean values of excess lifetime cancer risk (ELCR) associated with radon inhalation and ingestion for adults, children, and infants were 0.0005110, 0.0007660, and 0.0008930, respectively. Moreover, elevated conductivity and total dissolved solids in water samples suggest potential contamination, exceeding the recommended limits set by the World Health Organization. On the other hand, Heavy metals analysis shows a mean value of ELCR 0.125009 for adults and 0.000063 for infants. Results showed that heavy metal concentrations in soil samples exceeded permissible limits for all metals except chromium and lead, with the order of concentration being Cr &lt; Cd &lt; Pb &lt; Cu &lt; Zn. These findings underscore the need for ongoing monitoring and remediation efforts to mitigate environmental and health risks in Wadi B

Occurrence and Health Risk Assessment of Phthalates in Municipal Drinking Water Supply of a Central Indian City.

In this study, the occurrence of phthalates in the municipal water supply of Nagpur City, India, was studied for the first time. The study aimed to provide insights into the extent of phthalate contamination and identify potential sources of contamination in thecity's tap water. We analyzed fifteen phthalates and the total concentration (∑15phthalates) ranged from 0.27 to 76.36µgL-1. Prominent phthalates identified were di-n-butyl phthalate (DBP), di-isobutyl phthalate (DIBP), benzyl butyl phthalate (BBP), di (2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), and di-nonyl phthalate (DNP). Out of the fifteen phthalates analyzed, DEHP showed the highest concentration in all the samples with the median concentration of 2.27µgL-1, 1.39µgL-1, 1.83µgL-1, 2.02µgL-1, respectively in Butibori, Gandhibaag, Civil Lines, and Kalmeshwar areas of the city. In 30% of the tap water samples, DEHP was found higher than the EPA maximum contaminant level of 6µgL-1. The average daily intake (ADI) of phthalates via consumption of tap water was higher for adults (median: 0.25µgkg-1day-1) compared to children (median: 0.07µgkg-1day-1). The hazard index (HI) calculated for both adults and children was below the threshold level, indicating no significant health risks from chronic toxic risk. However, the maximum carcinogenic risk (CR) for adults (8.44 × 10-3) and children (7.73 × 10-3) was higher than the threshold level. Knowledge of the sources and distribution of phthalate contamination in municipal drinking water is crucial for effective contamination control and management strategies.

Performance evaluation of deep learning based stream nitrate concentration prediction model to fill stream nitrate data gaps at low-frequency nitrate monitoring basins

Accurate and frequent nitrate estimates can provide valuable information on the nitrate transport dynamics. The study aimed to develop a data-driven modeling framework to estimate daily nitrate concentrations at low-frequency nitrate monitoring sites using the daily nitrate concentration and stream discharge information of a neighboring high-frequency nitrate monitoring site. A Long Short-Term Memory (LSTM) based deep learning (DL) modeling framework was developed to predict daily nitrate concentrations. The DL modeling framework performance was compared with two well-established statistical models, including LOADEST and WRTDS-Kalman, in three selected basins in Iowa, USA: Des Moines, Iowa, and Cedar River. The developed DL model performed well with NSE >0.70 and KGE >0.70 for 67% and 79% nitrate monitoring sites, respectively. DL and WRTDS-Kalman models performed better than the LOADEST in nitrate concentration and load estimation for all low-frequency sites. The average NSE performance of the DL model in daily nitrate estimation is 20% higher than that of the WRTDS-Kalman model at 18 out of 24 sites (75%). The WRTDS-Kalman model showed unrealistic fluctuations in the estimated daily nitrate time series when the model received limited observed nitrate data (less than 50) for simulation. The DL model indicated superior performance in winter months' nitrate prediction (60% of cases) compared to WRTDS-Kalman models (33% of cases). The DL model also better represented the exceedance days from the USEPA maximum contamination level (MCL). Both the DL and WRTDS-Kalman models demonstrated similar performance in annual stream nitrate load estimation, and estimated values are close to actual nitrate loads.

STUDY OF THE PLANT COVER AND CONTENTS OF RADIONUCLIDES AT THE AKTAN-BERLI SITE

The article presents characteristics of the plant cover at the “Aktan-Berli” site including the content of natural (40K, 232Th, 226Ra) and artificial (137Cs, 90Sr, 241Am, 239+240Pu, 3Н) radionuclides. It has been found that the plant cover of the site is represented by ecosystems of high Kazakh hammocks bordering on ecosystems of lowlands in the west and ecosystems of ancient alluvial and modern alluvial plains. The content of free-water 3Н (FWT) and organic constituent (OBT) is below the detection limit of the methodological instrumentation in use (&lt;8 Bq/kg). The concentration of natural radionuclides is typical, especially for Kazakhstani soil. The range of 90Sr activity concentration in plants range from &lt;0.7 to 6.7 Bq/kq, 137Cs – from &lt;0.6 to 1.1 Bq/kg, the content of 241Am and 239+240Pu are below the detection limit in most cases (&lt;0,2 Bq/kg). Values of the radiation dose rate of plants are below the accepted international criteria. In general, the content of radionuclides in the plant cover of the “Aktan-Berli” site is significantly below the maximum permissible levels of radioactive contamination of forage plants posing no hazard when using the territory of interest for economic activities.

Advancing Evaluation of Microplastics Thresholds to Inform Water Treatment Needs and Risks.

Although human health impacts of microplastics are not well understood, concern regarding chemical contaminants retained on or within them is growing. Drinking water providers are increasingly asked about these risks, but strategies for evaluating them and the extent of treatment needed to manage them are currently lacking. Microplastics can potentially induce health effects if the concentration of contaminants adsorbed to them exceeds predetermined drinking water guidelines (e.g., Maximum Contaminant Levels). The risk posed by microplastics due to adsorbed contaminants is difficult to determine, but a worst-case scenario can be evaluated by using adsorption capacity. Here, a "Threshold Microplastics Concentration" (TMC) framework is developed to evaluate whether waterborne microplastic concentrations can potentially result in the intake of regulated contaminants on/in microplastics at levels of human health concern and identify treatment targets for managing associated health risk. Exceeding the TMC does not indicate an immediate health risk; it informs the need for detailed risk assessment or further treatment evaluation to ensure particle removal targets are achieved. Thus, the TMC concept and framework provide an updateable, science-based screening tool to determine if there is a need for detailed risk assessment or treatment modification due to waterborne microplastics in supplies used for potable water production.

An overview of the Be Well Home Health Navigator Program to reduce contaminants in well water: Design and methods

BackgroundThe Be Well Home Health Navigator Program is a prospective, randomized controlled trial (RCT) implemented to compare a community health navigator program to usual care program to reduce contaminants in drinking water. Design and settingThis 4-year two-armed RCT will involve well owners in Oregon that have private drinking water wells that contain arsenic, nitrate, or lead above maximum contaminant levels. InterventionThe intervention leverages the trusted relationship between Cooperative Extension Service (CES) Community Educators and rural well owners to educate, assist and motivate to make decisions and set actionable steps to mitigate water contamination. In this study, CES will serve as home health navigators to deliver: 1) individualized feedback, 2) positive reinforcement, 3) teach-back moments, 4) decision-making skills, 5) navigation to resources, 6) self-management, and 7) repeated contact for shaping and maintenance of behaviors. Usual care includes information only with no access to individual meetings with CES. Measurable outcomesPre-specified primary outcomes include 1) adoption of treatment to reduce exposure to arsenic, nitrate, or lead in water which may include switching to bottled water and 2) engagement with well stewardship behaviors assessed at baseline, and post-6 and 12 months follow-up. Water quality will be measured at baseline and 12-month through household water tests. Secondary outcomes include increased health literacy scores and risk perception assessed at baseline and 6-month surveys. ImplicationsThe results will demonstrate the efficacy of a domestic well water safety program to disseminate to other CES organizations.Trial registration number: NCT05395663

Soil contaminants pose delayed but pervasive threat to shallow groundwater

Dissolved chemical transport in soils can delay groundwater contamination for years. These lag times, τ, are controlled by location-dependent hydrologic, soil, and chemical properties. Despite thousands of sites with known groundwater contamination globally, numerous sites with unidentified chemical leaks could take decades to reach and degrade groundwater. Here, we quantify the potential for contamination (n = 621 dissolved chemicals) to have reached water tables below 2.7 million chemical sites since their construction and when in the future groundwater contamination could occur. For the most mobile contaminants, groundwater contamination could exceed the maximum contaminant level for about half of these sites (48.1 %, −3.7 %/+18.6 % with source and environmental uncertainties) as of 2021. However, most groundwater contaminants are less mobile and delayed in the vadose zone, where substantially fewer sites could have already contaminated groundwater by 2021 for moderately mobile chemicals (Kd = 1 L/kg, 23.3 % −8.1 %/+21.1 %) and even less mobile chemicals (Kd = 100 L/kg, 0.3 % −0.1/+1.9 %). The modeled urgent (τ ≤ 10 yr) and cross-generational (10 < τ ≤ 100 yr) contamination potential patterns provide the first global sensitivity analysis of groundwater contaminants. These results highlight the need for chemical site monitoring, management, and planning, especially in the developing world.

Investigating the presence of dioxins in drinking water: implications for public health

ABSTRACT The presence of highly toxic dioxins, specifically polychlorinated dibenzo-p-dioxins (PCDDs), in drinking water is a matter of great concern due to their long-lasting nature and harmful effects. In this study, we detected three out of the five dioxin congeners: 2, 3, 7, 8-tetrachlorodibenzodioxin (TCDD), 1, 2, 3, 7, 8-pentachlorodibenzo-p-dioxin (PeCDD), and octachlorodibenzo-p-dioxin (OCDD). The investigation revealed that three dioxins were present in water samples of winter season, while TCDD and OCDD were found in the summer season. The geometric mean concentrations of PCDDs were 229.9 ng/L (winter) and 108.4 ng/L (summer), exceeded the maximum contaminant level of 30 pg/L set by the USEPA in surface water. The estimated daily intake of PCDDs for residents through drinking water was 273.97 ng-WHO2005-TEQ/kg/days during winter and 78.875 ng-WHO2005-TEQ/kg/days during summer. Our study emphasizes the urgent need for further research on persistent organic pollutants in drinking water to safeguard public health and community well-being.

Occurrence and concentrations of traditional and emerging contaminants in onsite wastewater systems and water supply wells in eastern North Carolina, USA.

Onsite wastewater treatment systems (OWTSs) and private wells are commonly used in Eastern North Carolina, USA. Water from private wells is not required to be tested after the initial startup, and thus persons using these wells may experience negative health outcomes if their water is contaminated with waste-related pollutants including bacteria, nitrate or synthetic chemicals such as hexafluoropropylne oxide dimer acid and its ammonium salt (GenX). Water samples from 18 sites with OWTSs and groundwater wells were collected for nitrate, Escherichia coli (E. coli), total coliform, and GenX concentration analyses. Results showed that none of the 18 water supplies were positive for E. coli, nitrate concentrations were all below the maximum contaminant level of 10 mg L-1, and one well had 1 MPN 100 mL-1 of total coliform. However, GenX was detected in wastewater collected from all 18 septic tanks and 22% of the water supplies tested had concentrations that exceeded the health advisory levels for GenX. Water supplies with low concentrations of traditionally tested for pollutants (nitrate, E. coli) may still pose health risks due to elevated concentrations of emerging contaminants like GenX and thus more comprehensive and routine water testing is suggested for this and similar persistent compounds.

Arsenic (As) accumulation in different genotypes of indica rice (Oryza sativa L.) and health risk assessment based on inorganic As.

To reveal differences in arsenic (As) accumulation among indica rice cultivars and assess the human health risks arising from inorganic arsenic (iAs) intake via rice consumption, a total of 320 field indica rice samples and corresponding soil samples were collected from Fujian Province in China. The results showed that available soil As (0.03 to 3.83mg/kg) showed a statistically significant positive correlation with total soil As (0.10 to 19.45mg/kg). The inorganic As content in brown rice was between 0.001 and 0.316mg/kg. Among the cultivars, ten brown rice samples (3.13%) exceeded the maximum contaminant level (MCL) of iAs in food of 0.2mg/kg in China. The estimated daily intake (EDI) and calculated individual incremental lifetime cancer risk (ILCR) ranged from 0.337µg/day to 106.60µg/day and from 8.18 × 10-6 to 2.59 × 10-3, respectively. Surprisingly, the average EDI and the EDIs of 258 (80.63%) brown rice samples were higher than the maximum daily intake (MDI) of 10µg/day in drinking water as set by the National Research Council. The mean ILCR associated with iAs was 54.3 per 100,000, which exceeds the acceptable upper limit (AUL) of 10 per 100,000 set by the USEPA. Notably, the cultivars Y-Liang-You 1 and Shi-Ji 137 exhibited significantly higher mean ILCRs compared to the AUL and other cultivars, indicating that they pose more serious cancer risks to the local population. Finally, this study demonstrated that the cultivars Yi-Xiang 2292 and Quan-Zhen 10 were the optimal cultivars to mitigate risks associated with iAs to human health from rice consumption.

Integrated geochemical and magnetic potentially toxic elements assessment: a statistical solution discriminating anthropogenic and lithogenic magnetic signals in a complex area of the southeast Nile Delta

Magnetic proxy approaches proved to be efficient for potentially toxic elements (PTEs) pollution assessment when targeting forests or areas with a homogenous background where anthropogenic magnetic signals could be easily distinguished. Here, we present a multidisciplinary approach for magnetic susceptibility (x\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$x$$\\end{document}) and HM assessment in a complex area in the Nile Delta, where geogenic input, land use, and various industries with different fly ash and surface water emissions interfere. Statistical analysis discriminates between the effects of lithologic elements and the concentrations of toxic anthropogenic elements. The studied elements are classified into lithogenic and anthropogenic-related (HMs, Au industry, and fertilizers industry) groups with maximum contamination levels of eight anthropogenic-related and highly toxic PTEs (Cu, Zn, Mo, Cd, Sb, Pb, Hg, and As) in the Akrasha industrial area (pollution load index = 15.84). Considering the whole data set, the numerical correlation of x\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$x$$\\end{document} with most PTE concentrations and the pollution load index (PLI) is weak, while it is moderate to strong with lithogenic elements. However, a comparison of lithogenic elements and PTE concentrations along with x-values in two separate clusters supports the correspondence of lithology with elevated x-values in silt and clay-rich soil samples as well as HM concentration in industrial sandy soils. Correspondence between magnetic maps and chemistry data with land use reflects the potential of magnetic proxy methods for qualitative PTE pollution pre-delineation of the polluted spots, provided that lithological conditions are carefully considered.

Arsenic Impairs Wound Healing Processes in Dermal Fibroblasts and Mice.

Inorganic arsenic (NaAsO2) is a naturally occurring metalloid found in water resources globally and in the United States at concentrations exceeding the U.S. Environmental Protection Agency Maximum Contamination Level of 10 ppb. While exposure to arsenic has been linked to cancer, cardiovascular disease, and skin lesions, the impact of arsenic exposure on wound healing is not fully understood. Cultured dermal fibroblasts exposed to NaAsO2 displayed reduced migration (scratch closure), proliferation, and viability with a lowest observable effect level (LOEL) of 10 µM NaAsO2 following 24 h exposure. An enrichment of Matrix Metalloproteinase 1 (MMP1) transcripts was observed at a LOEL of 1 µM NaAsO2 and 24 h exposure. In vivo, C57BL/6 mice were exposed to 10 µM NaAsO2 in their drinking water for eight weeks, then subjected to two full thickness dorsal wounds. Wounds were evaluated for closure after 6 days. Female mice displayed a significant reduction in wound closure and higher erythema levels, while males showed no effects. Gene expression analysis from skin excised from the wound site revealed significant enrichment in Arsenic 3-Methyltransferase (As3mt) and Estrogen Receptor 2 (Esr2) mRNA in the skin of female mice. These results indicate that arsenic at environmentally relevant concentrations may negatively impact wound healing processes in a sex-specific manner.

Geologic predictors of drinking water well contamination in North Carolina

More than 200 million people worldwide, including 11 million in the US, are estimated to consume water containing arsenic (As) concentrations that exceed World Health Organization and US EPA standards. In most cases, the As found in drinking water wells results from interactions between groundwater and geologic materials (geogenic contamination). To that end, we used the NCWELL database, which contains chemical information for 117,960 private drinking wells across North Carolina, to determine the spatial distribution of wells containing As contaminated water within geologic units. Specific geologic units had large percentages (up to 1 in 3) of wells with water exceeding the EPA As maximum contaminant level (MCL, 10 μg/L), both revealing significant variation within areas that have been previously associated with As contamination and identifying as yet unidentified problematic geologic units. For the 19 geologic units that have &gt;5% of wells that contain water with As concentrations in exceedance of 10 μg/L, 12 (63%) are lithogenically related to the Albemarle arc, remnants of an ancient volcanic island, indicating the importance of volcanogenic materials, as well as recycled (eroded and deposited) and metamorphosed volcanogenic material. Within geologic units, wells that have As concentrations exceeding 10 μg/L tended to have pH values greater than wells with As concentrations less than 10 μg/L, emphasizing the importance of the extent of interaction between groundwater and geologic materials. Using census information with the geologic-based exceedance percentages revealed the importance of regional geology on estimates of population at risk compared to estimates based on county boundaries. Results illustrate that relating As contamination to geologic units not only helps explain sources of geogenic contamination but sharpens the identification of communities at risk for exposure and further illuminates problematic areas through geologic interpretation.

CURRENT RADIOLOGICAL STATUS OF CONTAMINATED MEADOWS AND PASTURES AND ASSESSMENT OF THE POSSIBILITY OF THEIR RETURN TO USE

Meadows and pastures are the fodder base for milk and meat production. The rehabilitation and return to economic use of the radionuclide-contaminated meadows and pastures is an important and urgent national economic task. The criterion of returning radionuclide-contaminated meadows and pastures to economic use may be individual doses to residents who consume milk and meat produced on these lands. Values that determine the doses are the terrestrial density of soil contamination and permissible levels of radionuclides in food products (PL-2006). Considering abandoned agricultural lands, it is necessary to note the time that passed after the accident. The contamination of the territory by 137Cs and 90Sr decreased in more than 2 times due to radioactive decay only. The decreasing due to radioactive decay and self-remediation processes (fixation of radionuclides by soil, their redistribution in the root layer of the soil, etc.) resulted in declining of radioactive contamination of products. This allows us to consider the issue of returning reclaimed lands to use in accordance with the current radiological criteria and existing legal acts. Agricultural lands are a territorial resource and the main means of agricultural production, therefore the rehabilitation of the lands will contribute to the development of both individual producers and settlements as a whole. After the Chornobyl accident, in accordance with the Law of Ukraine "On the Legal Regime of the Territory Exposed to Radioactive Contamination Due the Chornobyl Catastrophe", the territory exposed to radioactive contamination had been divided into zones. However, the belonging of the lands to a zone does not guarantee that the products produced there will meet the requirements of PL-2006. Therefore, in 1998, taking into account the type of soil, the UIAR assessed the maximum permissible levels of soil contamination which ensure the fulfillment of the requirements of PL-2006 in terms of the content of 137Cs in produced products. However, in the 25 years that have passed since the establishment of these levels and the cesium transfer factors into plants have decreased significantly. Therefore, the values of the maximum permissible levels of soil contamination are conservative and their use leads to conservative conclusions. The current radiological state of meadows and pastures contaminated with radionuclides and the possibility of returning them to use were assessed. It is shown that most of the considered abandoned lands actually belong to the third zone of radioactive contamination. Some of the lands belong to the second zone of radioactive contamination - radiation-hazardous lands. It was found that the restrictions set in the recommendations for conducting agriculture in the conditions of radioactive contamination for the production of milk and meat are very conservative. Assessment of the possibility of using contaminated meadows and pastures for milk and meat production requires more precise and targeted forecasting methods.