Mature Cow Weight Research Articles

Breeding goals and economic values for Nellore cattle in a full-cycle production system

The objective of this study was to develop a bio-economic model for the estimation of economic values of economically important traits in a full-cycle beef cattle production system. The bio-economic model calculated economic values by simulating the impact of changes in the profit of the system consisting of a 1% increase in each trait of the breeding objective, while the other traits were kept constant. The bio-economic model was effective in estimating the sources of revenues and expenses of the production system. The estimated economic values were, in the order of importance for the full-cycle system, R$ 3.69 for male slaughter weight, R$ 3.63 for male weaning weight, R$ 3.58 for weaning rate, R$ 3.40 for female slaughter weight, R$ 2.30 for female weaning weight, and R$ 0.13 for mature cow weight. The results showed that all traits evaluated in the full-cycle system had positive economic impact, indicating that selection would increase profitability maximizing the expected response for the traits of the breeding goal.

Genetic correlations among weight and cumulative productivity of crossbred beef cows.

Mature weight of beef cows in the United States has been increasing as a correlated response to selection for calf growth. Unfavorable genetic correlations between cow weight and various measures of female fertility, stayability, and lifetime production suggest declining cow productivity might also be expected as a correlated response to growth selection. National cattle evaluations, however, show increasing trends for stayability and sustained fertility. Random regression (RR) models were employed to further examine genetic relationships among cow weight and productivity, and to assess cumulative productivity traits observed throughout cows' productive lives. Records were from 13,707 females born in the Germplasm Evaluation (GPE) project and mated to calve first as 2-yr olds. Weights observed at pregnancy testing (n = 65,086) and calf production from each exposure to breeding (n = 71,583) were included in uni- and bivariate RR analyses. Production following each breeding season was added to previous production to obtain cumulative production records for each season that the female was exposed to breeding. Zero was added if the cow failed to produce after a breeding season. The number of pregnancies, calves born and calves weaned, as well as age and weight of weaned calves, were accumulated. Projected age-specific heritability (h2) estimates for cumulative production were low (<0.1) at age 2 but increased with age (0.12 to 0.26 at age 6; 0.32 to 0.48 at age 10). Estimated h2 for cow weight were high, fluctuating between 0.6 and 0.7 from ages 2 through 10. Genetic correlations (rg) were positive among all ages within each trait. Between ages 3 and 9, estimated rg were negative between cumulative weaning productivity and cow weight. The correlations were usually weak enough (<-0.2) that small correlated declines from following yearling weight trends might be overcome by culling females after their first reproductive failure. More noticeable increases might be realized by selection among sires with EBV based on productivity of several daughters. The RR EBV for cow weight and cumulative weight weaned represent major sources of variation in cow costs and income, and can be incorporated into economic selection indexes to project differences in cow profitability and value at any age. The RR approach utilizes all available records, enabling later productivity to be projected from observations on young cows.

Genetic association between mature weight and early growth and heifer pregnancy traits in Nellore cattle

In order to determine whether selection for traits included in the selection index used in a breeding program would increase the mature weight (MW) of females, this study analyzed the association between MW and four traits composing the index: weaning weight (WW), post-weaning weight gain in 345 days (PWG), scrotal circumference (SC), and muscling score (MUSC). Additionally, the genetic relationship of MW with probability of pregnancy at 14 months (PP14) was analyzed to evaluate the association between MW and sexual precocity. The database included 480,000 Nellore animals from Agropecuária CFM born between 1984 to 2012 on farms in the states of São Paulo, Mato Grosso do Sul, and Goiás. The heritability for the six traits and the correlations between them were estimated, with special importance being given to the correlation of MW with the other five traits. The (co)variance components were estimated by the restricted maximum likelihood method. The heritability coefficients were 0.22 ± 0.01, 0.19 ± 0.01, 0.50 ± 0.01, 0.22 ± 0.01 and 0.50 ± 0.01 for WWd, PWG, SC, MUSC and PP14, respectively. The genetic correlations between MW and the growth traits were positive: 0.55 ± 0.04 (WWd), 0.68 ± 0.03 (PWG), 0.07 ± 0.02 (SC), and 0.46 ± 0.01 (MUSC). Selection for WW, PWG and MUSC might be related to an increase in MW of cows. The correlation between MW and PP14 was negative and of low magnitude (−0.03). However, selection for increasing MW in this population of Nellore cattle should not cause genetic change in fertility. The scientific literature on correlation estimates between MW and the PP14 are scarce. Further investigation on the same topic, using different data sets and other approaches are recommended.

Economic selection indexes for Hereford and Braford cattle raised in southern Brazil.

Economic selection indexes (EI) are considered the best way to select the most profitable animals for specific production systems. Nevertheless, in Brazil, few genetic evaluation programs deliver such indexes to their breeders. The aims of this study were to determine the breeding goals (BG) and economic values (EV, in US$) for typical beef cattle production systems in southern Brazil, to propose EI aimed to maximize profitability, and to compare the proposed EI with the currently used empirical index. Bioeconomic models were developed to characterize 3 typical production systems, identifying traits of economic impact and their respective EV. The first was called the calf-crop system and included the birth rate (BR), direct weaning weight (WWd), and mature cow weight (MCW) as selection goals. The second system was called the full-cycle system, and its breeding goals were BR, WWd, MCW, and carcass weight (CW). Finally, the third was called the stocking and finishing system, which had WWd and CW as breeding goals. To generate the EI, we adopted the selection criteria currently measured and used in the empirical index of PampaPlus, which is the genetic evaluation program of the Brazilian Hereford and Braford Association. The comparison between the EI and the current PampaPlus index was made by the aggregated genetic-economic gain per generation (Δ). Therefore, for each production system an index was developed using the derived economic weights, and it was compared with the current empirical index. The relative importance (RI) for BR, WWd, and MCW for the calf-crop system was 68.03%, 19.35%, and 12.62%, respectively. For the full-cycle system, the RI for BR, WWd, MCW, and CW were 69.63%, 7.31%, 5.01%, and 18.06%, respectively. For the stocking and finishing production system, the RI for WWd and CW was 34.20% and 65.80%, respectively. The Δ for the calf-crop system were US$6.12 and US$4.36, using the proposed economic and empirical indexes, respectively. Respective values were US$19.87 and US$18.22 for the full-cycle system and US$20.52 and US$18.52 in the stocking and finishing system. The efficiency of the proposed EI had low sensitivity to changes in the values of the economic and genetic parameters. The 3 EI generated higher Δ when using the proposed economic weight compared to the Δ provided by a PampaPlus index, suggesting the use of proposed EI to obtain greater economic profitability in relation to the current empirical PampaPlus index.

Economic selection index development for Beefmaster cattle II: General-purpose breeding objective.

An economic selection index was developed for Beefmaster cattle in a general-purpose production system in which bulls are mated to a combination of heifers and mature cows, with resulting progeny retained as replacements or sold at weaning. National average prices from 2010 to 2014 were used to establish income and expenses for the system. Genetic parameters were obtained from the literature. Economic values were estimated by simulating 100,000 animals and approximating the partial derivatives of the profit function by perturbing traits 1 at a time, by 1 unit, while holding the other traits constant at their respective means. Relative economic values for the objective traits calving difficultly direct (CDd), calving difficulty maternal (CDm), weaning weight direct (WWd), weaning weight maternal (WWm), mature cow weight (MW), and heifer pregnancy (HP) were -2.11, -1.53, 18.49, 11.28, -33.46, and 1.19, respectively. Consequently, under the scenario assumed herein, the greatest improvements in profitability could be made by decreasing maintenance energy costs associated with MW followed by improvements in weaning weight. The accuracy of the index lies between 0.218 (phenotypic-based index selection) and 0.428 (breeding values known without error). Implementation of this index would facilitate genetic improvement and increase profitability of Beefmaster cattle operations with a general-purpose breeding objective when replacement females are retained and with weaned calves as the sale end point.

Genetic trends for mature body weight, visual scores, and growth traits in Nellore cattle

ABSTRACT: Mature weight (MW) of cows is related to the costs of their production. Usually, cows with moderate MW are more efficient in challenging environments, such as those available in the production systems in Brazil. In the present study, the selection index comprises the following traits: conformation, finishing precocity, musculature at weaning (WC, WP, WM) yearling (YC, YP and YM), scrotal circumference at yearling (SC), days to gain 160kg from birth to weaning (D160) and 240kg after weaning (D240). This are related to birth weight gain at weaning (WG) and from weaning to yearling (YG). The mature (MW) and birth weight (BW) traits were not considered in the selection index. The aim of this study was to estimate the values for the genetic trends (GT) of some important selection (MW) and economic traits (BW). A bi-character analysis of MW and other characteristics was performed to estimate the (co)variance components and genetic parameters. The GT results obtained for MW were null (0.0065% or 0.02718kg per year) in the period 1990-2007. The GT values were determined for BW (-0.0650% or -0.02017kg), WG (0.0758% or 0.0865kg), YG (0.1051% or 0.11377kg), and MW (0.0393% or 0.11276kg) per year. The visual score values (in score units) were also determined for GTat weaning [WC (0.2310%; 0.00707), WP (0.3624%; 0.3623%),aWM (0.01149; 0.01087)] yearling [YC (0.3256%; 0.00990), YP (0.4795%; 0.01496),YM (0.5041%; 0.01457)] per year. Index-based selection was effective to promote genetic progress in WG, WC, WP, WM, YG, YC, YP, and YM characteristics keeping BW and MW constant.

Impact of including growth, carcass and feed efficiency traits in the breeding goal for combined milk and beef production systems

Improving feed efficiency in dairy cattle could result in more profitable and environmentally sustainable dairy production through lowering feed costs and emissions from dairy farming. In addition, beef production based on dairy herds generates fewer greenhouse gas emissions per unit of meat output than beef production from suckler cow systems. Different scenarios were used to assess the profitability of adding traits, excluded from the current selection index for Finnish Ayrshire, to the breeding goal for combined dairy and beef production systems. The additional breeding goal traits were growth traits (average daily gain of animals in the fattening and rearing periods), carcass traits (fat covering, fleshiness and dressing percentage), mature live weight (LW) of cows and residual feed intake (RFI) traits. A breeding scheme was modeled for Finnish Ayrshire under the current market situation in Finland using the deterministic simulation software ZPLAN+. With the economic values derived for the current production system, the inclusion of growth and carcass traits, while preventing LW increase generated the highest improvement in the discounted profit of the breeding program (3.7%), followed by the scenario where all additional traits were included simultaneously (5.1%). The use of a selection index that included growth and carcass traits excluding LW, increased the profit (0.8%), but reduced the benefits resulted from breeding for beef traits together with LW. A moderate decrease in the profit of the breeding program was obtained when adding only LW to the breeding goal (−3.1%), whereas, adding only RFI traits to the breeding goal resulted in a minor increase in the profit (1.4%). Including beef traits with LW in the breeding goal showed to be the most potential option to improve the profitability of the combined dairy and beef production systems and would also enable a higher rate of self-sufficiency in beef. When considering feed efficiency related traits, the inclusion of LW traits in the breeding goal that includes growth and carcass traits could be more profitable than the inclusion of RFI, because the marginal costs of measuring LW can be expected to be lower than for RFI and it is readily available for selection. In addition, before RFI can be implemented as a breeding objective, the genetic correlations between RFI and other breeding goal traits estimated for the studied population as well as information on the most suitable indicator traits for RFI are needed to assess more carefully the consequences of selecting for RFI.

Corrigendum to: Comparison of B-splines and non-linear functions to describe growth patterns and predict mature weight of female beef cattle

The objective of this study was to compare the ability of Basis spline (B-spline) models and five non-linear functions (Richards, Brody, Von Bertalanffy, Gompertz and Logistic) to describe the growth of females of a beef cattle breed and predict cow mature weight (A). Random regression models that included animal variation within function parameters were fitted using mixed model procedures. Comparisons were made among these functions for goodness of fit, standardised residuals and biological interpretability of the growth curve parameters. The B-spline function showed the best goodness of fit and within non-linear functions, the Richards and Von Bertalanffy functions estimated bodyweight at different periods accurately. The method of fitting the residual variance that provided the best goodness of fit in the model was the constant plus power variance function. The Richards function was found to be the best non-linear function and was compared with the B-spline function to predict mature weight. When the A parameter was estimated using fixed effects, it had a low correlation with the actual mature weight of the cow and the use of this estimate yielded no more gain in predictive accuracy of mature weight than the use of average breed mature weight. When A was estimated using fixed and random effects, it had a moderate correlation with actual mature weight for the B-spline and Richards functions. The use of both types of effects to estimate the maturity index reduced the error compared with the use of average mature weight, especially for the B-spline function, which is recommended as the best function to describe animal growth and predict mature weight.

Breeding objectives for a Nellore cattle rearing system

Abstract:The objective of this work was to define the traits that should be included as breeding objectives for Nellore cattle, according to simulations with a bio-economic model for rearing systems. The economic values (EVs) of the traits were calculated as the differences between the profits due to an increased performance of 1% in each trait, with the others traits remaining constant. To determine the impact of each selection on the revenue system, two scenarios were simulated based on the traits being selected. In the first scenario, the adopted selection criteria were: weaning weight (WW), weaning rate (WR), yearling weight (YW), and mature cow weight (MCW). In the second scenario, the cumulative productivity (CP) of dams was used as an indirect evaluation of the performance of calves, with all the other traits included, except WW. In the first scenario, an EV of R$ 1.44 kg-1 was obtained for WW. In the second scenario, an EV of R$ 2.91 kg-1 was obtained for CP. The trait with the highest EV in both scenarios was WR, which enhanced the profits by R$ 3.21 for each 1% increased performance. The meat price paid to the producer is the factor with the greatest impact on the EVs of all examined traits.

Description of the growth curve for Angus pasture-fed cows under extensive systems.

Growth curves are useful for describing the sigmoid shape of an animal's weight pattern over time. The purpose of the present study was to describe, for the first time, a complete growth curve for pasture-fed Angus cows in Uruguay and to analyze the major fixed effects that affect the estimation of mature cow weight (CW). A total of 22,743 records from 5,284 cows belonging to 73 herds were used in the statistical analysis. Five nonlinear models (Brody, Gompertz, Von Bertalanffy, logistic, and Richards) and a 3-knot cubic spline function were fitted to model weight change across age. Body weights were recorded at birth, weaning, and 18 mo and as an adult (at 2.3-3.6, 3.6-4.6, 4.6 to 5.6, 5.6 to 6.6, and 6.6 to 8.1 yr). After preliminary analyses, the fixed effects included in the model to estimate CW were BCS, herd, year and month of measurement, and age of dam. The herd and BCS were the major significant sources of variation. The Richards model had the lowest values for Akaike information criterion, Bayesian information criterion, and -2 log likelihood, with the asymptotic weight being 542 kg. The spline function was the model that fitted the data most closely to the observed weights followed by the Richards function. The Richards model gave better predictions of weights from birth to maturity than the other 4 nonlinear models, because these functions were shown to over- or underestimate weights at different ages in this beef cattle data set. The predicted curve showed that cows reach mature CW after 5 yr of age, which is the age commonly assumed as adult weight in beef cattle. Results form this analysis allowed the estimation of CW and rate of maturing and to take knowledge of the shape of growth curve for Angus females in Uruguay under extensive conditions, helping breeders to take selection decisions. In this way, breeders can optimize the management and efficiency for each production system.

Comparison of B-splines and non-linear functions to describe growth patterns and predict mature weight of female beef cattle

The objective of this study was to compare the ability of Basis spline (B-spline) models and five non-linear functions (Richards, Brody, Von Bertalanffy, Gompertz and Logistic) to describe the growth of females of a beef cattle breed and predict cow mature weight (A). Random regression models that included animal variation within function parameters were fitted using mixed model procedures. Comparisons were made among these functions for goodness of fit, standardised residuals and biological interpretability of the growth curve parameters. The B-spline function showed the best goodness of fit and within non-linear functions, the Richards and Von Bertalanffy functions estimated bodyweight at different periods accurately. The method of fitting the residual variance that provided the best goodness of fit in the model was the constant plus power variance function. The Richards function was found to be the best non-linear function and was compared with the B-spline function to predict mature weight. When the A parameter was estimated using fixed effects, it had a low correlation with the actual mature weight of the cow and the use of this estimate yielded no more gain in predictive accuracy of mature weight than the use of average breed mature weight. When A was estimated using fixed and random effects, it had a moderate correlation with actual mature weight for the B-spline and Richards functions. The use of both types of effects to estimate the maturity index reduced the error compared with the use of average mature weight, especially for the B-spline function, which is recommended as the best function to describe animal growth and predict mature weight.

Evaluation of productivity of sexually precocious Nelore heifers

The objectives of the present study were to investigate the influence of yearling weight on the occurrence of early pregnancy and to determine differences between precocious and non-precocious heifers in terms of pre- and postnatal calf mortality, calf weight and height, mature cow weight, and stayability of the cow in the herd. Data from 26 977 females of a Nelore herd that participated in the breeding season between 1986 and 2004 were analyzed. The influence of yearling weight on sexual precocity and differences between precocious and non-precocious heifers in pre- and postnatal calf mortality and stayability were analyzed using the GENMOD procedure of the SAS program. Differences in the growth traits between precocious and non-precocious animals were estimated by contrast analysis. Three groups were analyzed for postnatal mortality: first calving of the heifers, calves born from the third calving and all offspring of the cow. In order to have a standardized calving to conception period for all females (precocious and non-precocious), calves born from the second calving were not included in the analysis. This was necessary because the first calving to conception period (days open) of precocious heifers was longer than for non-precocious due to farm reproductive management. No differences in postnatal mortality rates, from the third calving, were observed between the two groups of heifers studied. Analysis of all offspring of the dams showed a 9% higher probability of death of calves born to precocious heifers compared with calves born to non-precocious heifers. With respect to stayability, precocious heifers presented 33% greater odds to remain in the herd until 5 and 6 years of age and 28% greater odds to remain in the herd until 7 years when compared with non-precocious heifers. Precocious heifers weaned calves (205 days) significantly heavier than non-precocious ones, 1.410 and 0.797 kg considering the weaning weights of all offspring and of the third calving, respectively. With respect to sexual precocity, the results suggest that the probability of heifers to become pregnant at 16 months of age increases with increasing weight. However, heifers weighing more than 240 kg present practically the same pregnancy probability. Nevertheless, exposure of heifers during the early breeding season is recommended for beef cattle herds raised in tropical regions in view of the numerous benefits demonstrated here.

Economic values of production and functional traits, including residual feed intake, in Finnish milk production

Improving the feed efficiency of dairy cattle has a substantial effect on the economic efficiency and on the reduction of harmful environmental effects of dairy production through lower feeding costs and emissions from dairy farming. To assess the economic importance of feed efficiency in the breeding goal for dairy cattle, the economic values for the current breeding goal traits and the additional feed efficiency traits for Finnish Ayrshire cattle under production circumstances in 2011 were determined. The derivation of economic values was based on a bioeconomic model in which the profit of the production system was calculated, using the generated steady state herd structure. Considering beef production from dairy farms, 2 marketing strategies for surplus calves were investigated: (A) surplus calves were sold at a young age and (B) surplus calves were fattened on dairy farms. Both marketing strategies were unprofitable when subsidies were not included in the revenues. When subsidies were taken into account, a positive profitability was observed in both marketing strategies. The marginal economic values for residual feed intake (RFI) of breeding heifers and cows were −25.5 and −55.8 €/kg of dry matter per day per cow and year, respectively. The marginal economic value for RFI of animals in fattening was −29.5 €/kg of dry matter per day per cow and year. To compare the economic importance among traits, the standardized economic weight of each trait was calculated as the product of the marginal economic value and the genetic standard deviation; the standardized economic weight expressed as a percentage of the sum of all standardized economic weights was called relative economic weight. When not accounting for subsidies, the highest relative economic weight was found for 305-d milk yield (34% in strategy A and 29% in strategy B), which was followed by protein percentage (13% in strategy A and 11% in strategy B). The third most important traits were calving interval (9%) and mature weight of cows (11%) in strategy A and B, respectively. The sums of the relative economic weights over categories for RFI were 6 and 7% in strategy A and B, respectively. Under production conditions in 2011, the relative economic weights for the studied feed efficiency traits were low. However, it is possible that the relative importance of feed efficiency traits in the breeding goal will increase in the future due to increasing requirements to mitigate the environmental impact of milk production.

Evaluation of mature cow weight: Genetic correlations with traits used in selection indices, correlated responses, and genetic trends in Nelore cattle

Genetic correlations of selection indices and the traits considered in these indices with mature weight (MW) of Nelore females and correlated responses were estimated to determine whether current selection practices will result in an undesired correlated response in MW. Genetic trends for weaning and yearling indices and MW were also estimated. Data from 612,244 Nelore animals born between 1984 and 2010, belonging to different beef cattle evaluation programs from Brazil and Paraguay, were used. The following traits were studied: weaning conformation (WC), weaning precocity (WP), weaning muscling (WM), yearling conformation (YC), yearling precocity (YP), yearling muscling (YM), weaning and yearling indices, BW gain from birth to weaning (BWG), postweaning BW gain (PWG), scrotal circumference (SC), and MW. The variance and covariance components were estimated by Bayesian inference in a multitrait analysis, including all traits in the same analysis, using a nonlinear (threshold) animal model for visual scores and a linear animal model for the other traits. The mean direct heritabilities were 0.21±0.007 (WC), 0.22±0.007 (WP), 0.20±0.007 (WM), 0.43±0.005 (YC), 0.40±0.005 (YP), 0.40±0.005 (YM), 0.17±0.003 (BWG), 0.21±0.004 (PWG), 0.32±0.001 (SC), and 0.44±0.018 (MW). The genetic correlations between MW and weaning and yearling indices were positive and of medium magnitude (0.30±0.01 and 0.31±0.01, respectively). The genetic changes in weaning index, yearling index, and MW, expressed as units of genetic SD per year, were 0.26, 0.27, and 0.01, respectively. The genetic trend for MW was nonsignificant, suggesting no negative correlated response. The selection practice based on the use of sires with high final index giving preference for those better ranked for yearling precocity and muscling than for conformation generates only a minimal correlated response in MW.

Genetic correlations between mature cow weight and productive and reproductive traits in Nellore cattle

We investigated genetic associations between mature cow weight (MW) and weaning weight (WW), yearling weight (YW), weight gain from birth to weaning (GBW), weight gain from weaning to yearling (GWY), weaning hip height (WHH), yearling hip height (YHH), scrotal circumference (SC), and age at first calving (AFC). Data from 127,104 Nellore animals born between 1993 and 2006, belonging to Agropecuária Jacarezinho Ltda., were analyzed. (Co)variance components were obtained by the restricted maximum likelihood method, applying an animal model in a multi-traits analysis. The model included direct genetic and residual effects as random effects, the fixed effects of contemporary group, and the linear and quadratic effects of animal age at recording (except for AFC, GBW, and GWY) and age of cow at calving as covariates (except for MW). The numbers of days from birth to weaning and from weaning to yearling were included as covariates for GBW and GWY, respectively. Estimated direct heritabilities were 0.43 ± 0.02 (MW), 0.33 ± 0.01 (WW), 0.36 ± 0.01 (YW), 0.28 ± 0.02 (GBW), 0.31 ± 0.01 (GWY), 0.44 ± 0.02 (WHH), 0.48 ± 0.02 (YHH), 0.44 ± 0.01 (SC), and 0.16 ± 0.03 (AFC). Genetic correlations between MW and productive traits were positive and of medium to high magnitude (ranging from 0.47 ± 0.03 to 0.71 ± 0.01). A positive and low genetic correlation was observed between MW and SC (0.24 ± 0.04). A negative genetic correlation (-0.19 ± 0.03) was estimated between MW and AFC. Selection to increase weight or weight gains at any age, as well as hip height, will change MW in the same direction. Selection for higher SC may lead to a long-term increase in MW. The AFC can be included in selection indices to improve the reproductive performance of beef cattle without significant changes in MW.

Genetic correlations between heifer subsequent rebreeding and age at first calving and growth traits in Nellore cattle by Bayesian inference

We estimated heritability for subsequent rebreeding (SR) of heifers and genetic correlations between this trait and weaning weight (WW), weight gain from weaning to yearling (WG), age at first calving (AFC), and mature cow weight (MW), in order to evaluate whether SR could be included as selection criterion in Nellore cattle. The SR of heifers was defined by attributing a value of 1 (success) or 0 (failure) to heifers that calved or not, respectively, given that they had calved once before. Records from 127,430 Nellore animals were analyzed. Genetic parameters were estimated by Bayesian inference using a nonlinear (threshold) animal model for SR and a linear animal model for the other traits in three-trait analyses, including SR and WW in all analyses. The posterior means of heritability for SR, WW, WG, AFC, and MW were 0.18 ± 0.02, 0.21 ± 0.01, 0.30 ± 0.01, 0.21 ± 0.01, and 0.45 ± 0.04, respectively. The posterior mean estimates of genetic correlations between SR and WW, WG, AFC, and MW were -0.20 ± 0.06, 0.31 ± 0.07, -0.77 ± 0.05, and -0.15 ± 0.09, respectively. Based on these genetic correlations, selection for higher gains for WG and younger AFC should result in an increase in heifer SR rates, while long-term selection for increasing WW should promote unfavorable responses in heifer SR. The use of breeding values for heifer SR as a selection criterion of Nellore bulls could increase heifer SR rate without significant changes in MW.

Random regression analyses using B-spline functions to model growth of Nellore cattle

The objective of this study was to estimate (co)variance components using random regression on B-spline functions to weight records obtained from birth to adulthood. A total of 82 064 weight records of 8145 females obtained from the data bank of the Nellore Breeding Program (PMGRN/Nellore Brazil) which started in 1987, were used. The models included direct additive and maternal genetic effects and animal and maternal permanent environmental effects as random. Contemporary group and dam age at calving (linear and quadratic effect) were included as fixed effects, and orthogonal Legendre polynomials of age (cubic regression) were considered as random covariate. The random effects were modeled using B-spline functions considering linear, quadratic and cubic polynomials for each individual segment. Residual variances were grouped in five age classes. Direct additive genetic and animal permanent environmental effects were modeled using up to seven knots (six segments). A single segment with two knots at the end points of the curve was used for the estimation of maternal genetic and maternal permanent environmental effects. A total of 15 models were studied, with the number of parameters ranging from 17 to 81. The models that used B-splines were compared with multi-trait analyses with nine weight traits and to a random regression model that used orthogonal Legendre polynomials. A model fitting quadratic B-splines, with four knots or three segments for direct additive genetic effect and animal permanent environmental effect and two knots for maternal additive genetic effect and maternal permanent environmental effect, was the most appropriate and parsimonious model to describe the covariance structure of the data. Selection for higher weight, such as at young ages, should be performed taking into account an increase in mature cow weight. Particularly, this is important in most of Nellore beef cattle production systems, where the cow herd is maintained on range conditions. There is limited modification of the growth curve of Nellore cattle with respect to the aim of selecting them for rapid growth at young ages while maintaining constant adult weight.

Genetic parameters for cow weight at calving and at calf weaning in South African Simmental cattle (Short communication)

A study was conducted to compare mature cow weight in the South African Simmental population when defined as the weight of the cow at calving or the weight of the cow at weaning of the calf. Data included in the analysis were 14458 records for cow weight at calving (CWT-C) representing 6534 cows and 18871 records for cow weight at weaning (CWT-W) representing 8395 cows. All cows were born between 1968 and 1996, while all calves were born between 1977 and 1998. The following effects had a significant influence on the traits and were included in the genetic analysis: Cow age in years fitted as a covariate term (linear and quadratic) and contemporary group fitted as a fixed effect. Contemporary group was defined as the unique combination of herd, birth year of calf, month of weighing, breeder-defined management group code for the calf and supplementary feeding code for the cow (for CWT-W). All analyses were done using ASREML, first fitting uni-trait and then bi-variate animal models that made provision for up to four weights per cow. The estimated genetic correlation obtained between the two cow weight traits was 0.95 ± 0.03, with a residual correlation of 0.61 ± 0.02. The heritability estimates for CWT-C and CWT-W from this analysis were 0.29 ± 0.04 and 0.37 ± 0.04, respectively. From a breeding perspective, these results confirm that little benefit is to be gained from weighing cows at calving if cows are to be weighed at weaning. If cow weights are to be recorded for an indication of cow maintenance costs, then weight at weaning is the more reliable and practical measure to record.Keywords: Simmental cattle, mature cow weight

Random regression models on Legendre polynomials to estimate genetic parameters for weights from birth to adult age in Canchim cattle*

The objective of this work was to estimate covariance functions for direct and maternal genetic effects, animal and maternal permanent environmental effects, and subsequently, to derive relevant genetic parameters for growth traits in Canchim cattle. Data comprised 49,011 weight records on 2435 females from birth to adult age. The model of analysis included fixed effects of contemporary groups (year and month of birth and at weighing) and age of dam as quadratic covariable. Mean trends were taken into account by a cubic regression on orthogonal polynomials of animal age. Residual variances were allowed to vary and were modelled by a step function with 1, 4 or 11 classes based on animal's age. The model fitting four classes of residual variances was the best. A total of 12 random regression models from second to seventh order were used to model direct and maternal genetic effects, animal and maternal permanent environmental effects. The model with direct and maternal genetic effects, animal and maternal permanent environmental effects fitted by quadric, cubic, quintic and linear Legendre polynomials, respectively, was the most adequate to describe the covariance structure of the data. Estimates of direct and maternal heritability obtained by multi-trait (seven traits) and random regression models were very similar. Selection for higher weight at any age, especially after weaning, will produce an increase in mature cow weight. The possibility to modify the growth curve in Canchim cattle to obtain animals with rapid growth at early ages and moderate to low mature cow weight is limited.

Economic weights of production and functional traits for Holstein‐Friesian cattle in Hungary

A bio-economic model was used to estimate economic values of 15 milk production, functional, growth and carcass traits for Hungarian Holstein-Friesian cattle. The calculations were carried out for the situation in Hungary from 2000 to 2007, assuming no production quotas. The marginal economic values were defined as partial derivatives of the profit function with respect to each trait in a production system with dairy cow herds and with sales of surplus male calves. The economic weights for maternal and direct components of traits were calculated multiplying the marginal economic values by the number of discounted expression summed over a 25-year investment period for 2-year-old bulls (candidates for selection). The standardized economic weight (economic weight x genetic standard deviation) of the trait or trait component expressed as percentage of the sum of the standardized economic weights for all traits and trait components represented the relative economic importance of this trait or trait component. The highest relative economic importance was obtained for milk yield (25%), followed by productive lifetime of cows (23%), protein yield and the direct component of a cow's total conception rate (9% each), the maternal effect of the total conception rate of cows and the somatic cell score (approximately 7% each), fat yield (5%) and mature weight of cows and daily gain in rearing of calves (approximately 4% each). Other functional traits (clinical mastitis incidence, calving difficulty score, total conception rate of heifers and calf mortality) reached a relative economic importance between 0.5% and 2%. Birth weight and dressing percentage were least important (<0.5%). Based on these results, the inclusion of productive lifetime and cow fertility in the breeding programme for Holstein-Friesian cattle in Hungary is advisable.