Polymer Matrix Research Articles

From sampling to cellblock: The fully automated journey of cytological specimens.

In recent years, technological innovation have emerged to standardize pathology laboratory processes and reduce the handling of diagnostic samples. Among them is an automatic tissue embedding system that eliminates the need for manual activity in tissue paraffin embedding, thereby improving sample preservation. Unfortunately, this system cannot be used for cytological specimens due to the lack of an effective holder to support the procedure steps. In this study, we evaluated the performance of a commercial polymer matrix to enable and standardize the automatic paraffin embedding of cytological material from different organs and sources. Cytological samples from 40 patients were collected on the matrices and submitted for fully automatic workflow preparation, from formalin fixation until paraffin block, using the Sakura embedding system. Our results demonstrated the feasibility of the automated procedure, from loading cytological sample onto the matrix to obtaining the paraffin cellblock, thereby avoiding manual manipulation of cellular material. All samples resulted adequately processed and paraffin-embedded showing satisfactory tissue permeation by processing reagents, optimal preservation of cytoplasmic and nuclear details, and good quality of staining results on paraffin sections. Automated embedding of cytological samples eliminates the risk of lost specimens, reduces laboratory burden, standardizes procedures, increases diagnostic yield, and ultimately improves patients' management.

Incorporation of canola meal as a sustainable natural filler in PLA foams

The canola oil industry generates significant waste as canola meal (CM) which has limited scope and applications. This study demonstrates the possibility of valorization of CM as a sustainable natural filler in a biodegradable polymer composite of Poly(lactic acid) (PLA). Generally, interfacial bonding between natural fibers and the polymer matrix in the composite is weak and non-uniform. One possible solution is to derivatize natural fibre to introduce interfacial bond strength and compatibility with the PLA polymer matrix. Here, CM was succinylated in a reactive extrusion process using succinic anhydride at 30 wt% to get 14% derivatization with 0.02 g of -COOH density per g of CM. The CM or succinylated CM at 5 and 15 wt% was co-extruded with amorphous PLA to get composite fibers. CM-PLA and succinylated CM-PLA biocomposites were foamed using a mild and green microcellular foaming process, with CO2 as an impregnating agent without any addition of organic solvents. The properties of the foams were analyzed using differential scanning calorimetry (DSC), Dynamic mechanical thermal analysis (DMTA), shrinkage, and imaging. The addition of CM or succinylated CM as a natural filler did not significantly change the glass transition temperature, melting point, percent crystallization, stiffness, and thermal stability of PLA foams. This suggests succinylation (modification) of CM is not a mandatory step for improving interphase compatibility with the amorphous PLA. The new PLA-CM foams can be a good alternative in the packaging industry replacing the existing petroleum-based polymer foams.Graphical

Carbon fiber recovery from carbon fiber reinforced polymer matrix composite by microwave pyrolysis

The recovery of high-value carbon fibers (CFs) from carbon fiber-reinforced polymers (CFRP) is essential for advancing sustainability goals. In this study, CFs were extracted from CFRP using a microwave pyrolysis method known for its efficiency and environmental friendliness. The pyrolysis process was optimized through the response surface methodology to minimize carbon residue accumulation on the CFs' surface. The microwave pyrolysis of CFRP was simulated using COMSOL software to analyze temperature distribution patterns. The optimal parameters for microwave pyrolysis were determined as follows: a temperature of 543.7 °C, a holding time of 22.8 minutes, and a microwave power of 840.9 W, resulting in a residual carbon rate of only 3.7 %. Scanning electron microscopy (SEM) examination revealed no visible surface damage to the CFs. Analysis using X-ray diffraction (XRD) and Raman spectroscopy indicated a slight reduction in the crystallinity and graphitization level of the CFs due to the presence of deposited carbon. Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) results suggested increased oxygen-containing functional groups. The comparative microstructural analysis between the pyrolyzed and pristine CFs showed no significant disparities. These results demonstrate the successful recovery of CFs through rapid resin pyrolysis in CFRP using microwave irradiation.

High‐Efficiency Luminescent Solar Concentrators Based on Carbon Dots with Simultaneously Ultrabright Solid‐State and Liquid‐State Luminescence

AbstractCarbon dots (CDs) are ideal fluorophores for optoelectronic devices. However, it is still a great challenge to obtain CDs with high solid‐state photoluminescence quantum yields (PLQYs). In this work, it is first reported that the barium‐doped CDs (Ba‐CDs), which can be simply synthesized on a large scale via a direct one‐step heating approach using an open vessel. The as‐synthesized Ba‐CDs exhibit ultrabright luminescence both in liquid and solid states. The as‐synthesized Ba‐CDs with a scale of 8.6 g per batch show a Stokes shift of ≈0.68 eV and high PLQYs of 80.8% and 66.8% in liquid and solid state, respectively. Interestingly, an efficient fluorescence enhancement phenomenon occurs when Ba‐CDs are mixed with polyvinylpyrrolidone (PVP), which reveals the critical issue of compatibility between CDs and polymer matrix can be well resolved. As a proof‐of‐concept, the Ba‐CDs are employed as fluorophores for high‐efficiency luminescent solar concentrator (LSC) fabrication. The Ba‐CDs@PVP‐based LSC has a PLQY of 88.78%, showing a breakthrough optical conversion efficiency of 7.16% and power conversion efficiency of 6.87% under natural light irradiation (40 mW cm−2). The results demonstrate the potential application of the ultrabright Ba‐CDs in efficient photovoltaic devices.

Evaluating SiO2/Al2O3/poly(acrylic acid-co-glycidyl methacrylate) composite as a novel adsorbent for cobalt(II) radionuclides

Abstract A novel SiO2/Al2O3/poly(acrylic acid-co-glycidyl methacrylate), SiO2/Al2O3/P(AA-co-GMA), composite was synthesized and evaluated for its effectiveness in adsorbing Co(II) ions from aqueous solutions. The composite was analyzed using various techniques including FTIR, SEM, TGA, DTA, and XRD. The composite displays a high specific surface area of 17.451 m2/g, exceeding that of the corresponding copolymer, which measures 0.236 m2/g. Batch adsorption experiments were conducted to investigate the factors influencing the adsorption capacity of the composite for Co(II) ions. In the pH experiments, it was found that at a solution pH of 3.4, the P(AA-co-GMA) copolymer alone showed limited capability in adsorbing Co(II) ions, achieving only 3.82 mg/g. However, upon integration of SiO2/Al2O3 into the polymer matrix, the composite exhibited a significantly enhanced adsorption capacity of 103.54 mg/g. The adsorption process followed a pseudo-second-order kinetic model and attained equilibrium within 60 min. The Langmuir isotherm model was found to best describe the adsorption behavior, with a maximum adsorption capacity of 217.86 mg/g. The adsorption of Co(II) was significantly affected by the ionic strength, especially with Al3+ displaying a more pronounced impact on the adsorption of Co(II) ions compared to Na+, Ca2+, and Mg2+. Thermodynamic studies indicate that the adsorption process was spontaneous and endothermic. Overall, the SiO2/Al2O3/P(AA-co-GMA) composite material displayed significant adsorption ability for Co(II) ions, making it a suitable option for further development as an effective adsorbent in water treatment applications.

Functionalised Fibres as a Coupling Reinforcement Agent in Recycled Polymer Composites.

This study addresses the structure-property relationship within the green concept of wood fibres with cellulose nanofibre functionalised composites (nW-PPr) containing recycled plastic polyolefins, in particular, polypropylene (PP-r). It focuses especially on the challenges posed by nanoscience in relation to wood fibres (WF) and explores possible changes in the thermal properties, crystallinity, morphology, and mechanical properties. In a two-step methodology, wood fibres (50% wt%) were first functionalised with nanocellulose (nC; 1-9 wt%) and then, secondly, processed into composites using an extrusion process. The surface modification of nC improves its compatibility with the polymer matrix, resulting in improved adhesion, mechanical properties, and inherent biodegradability. The effects of the functionalised WF on the recycled polymer composites were investigated systematically and included analyses of the structure, crystallisation, morphology, and surface properties, as well as thermal and mechanical properties. Using a comprehensive range of techniques, including X-ray diffraction (XRD), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), zeta potential measurements, and dynamic mechanical analysis (DMA), this study aims to unravel the intricate interplay of factors affecting the performance and properties of the developed nanocellulose-functionalised wood fibre-polymer composites. The interfacial adhesion of the nW-PPr polymer composites, crystallisation process, and surface properties was improved due to the formation of an H-bond between the nW coupling agent and neat PP-r. In addition, the role of nW (1.0 wt%) as a nucleating agent resulted in increased crystallinity, or, on the other hand, promoted the interfacial interaction with the highest amount (3.0% wt%, 9.0% wt%) of nW in the PP-r preferentially between the nW and neat PP-r, and also postponed the crystallisation temperature. The changes in the isoelectric point of the nW-PPr polymer composites compared to the neat PP-r polymer indicate the acid content of the polymer composite and, consequently, the final surface morphology. Finally, the higher storage modulus of the composites compared to neat r-PP shows a dependence on improved crystallinity, morphology, and adhesion. It was clear that the results of this study contribute to a better understanding of sustainable materials and can drive the development of environmentally friendly composites applied in packaging.

Hybrid Ethylcellulose Polymeric Films: Ag(I)-Based Components and Curcumin as Reinforcing Ingredients for Enhanced Food Packaging Properties.

Bio-active ethylcellulose (EC) polymeric films have been obtained by incorporating curcumin (curc) and Ag(I)-based compounds, known for their antioxidant and antimicrobial activity, respectively, within the polymeric matrix. The recently reported Ag(I) coordination polymer, in both its structural forms (α-[(bpy)Ag(OTf)]∞ and β-{[(bpy)Ag][OTf]}∞), and the [(bpy)Ag(OTf)]∞-curc polymeric co-crystal (bpy = 2,2'-bipyridine; OTf = trifluoromethanesulfonate) have been selected as Ag(I) species. The hybrid composite films have been prepared through the simple solvent casting method and characterized through Powder X-Ray Diffraction (PXRD), Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared (FTIR) spectroscopy, Scanning Electron Microscope (SEM), UV-vis spectroscopy. The deep investigation of the film samples highlighted the non-inert behaviour of EC towards these specific active ingredients. Antimicrobial tests showed that EC films embedding the Ag(I)-based compounds present good antimicrobial performance, in particular against Staphylococcus aureus, used as a model of Gram-positive bacteria. In addition, Silver migration tests, performed on the Ag(I)-incorporating EC films, evidenced low values of silver release particularly in the case of the EC films incorporating [(bpy)Ag(OTf)]∞-curc.

Quasi-Solid-State Electrolyte Induced by Metallic MoS2 for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are a promising high-energy-density technology for next-generation energy storage but suffer from an inadequate lifespan. The poor cycle life of Li-S batteries stems from their commonly adopted catholyte-mediated operating mechanism, where the shuttling of dissolved polysulfides results in active material loss on the sulfur cathode and surface corrosion on the lithium anode. Here, we report in situ formation of a quasi-solid-state electrolyte (QSSE) on the metallic 1T phase molybdenum disulfide (MoS2) host that extends the lifetime of Li-S batteries. We find that the metallic 1T phase MoS2 host is able to initiate the ring-opening polymerization of 1,3-dioxolane (DOL), forming an integrated QSSE inside batteries. Nuclear magnetic resonance analysis reveals that the QSSE consists of ∼13% liquid DOL in a solid polymer matrix. The QSSE efficiently mediates sulfur redox reactions through dissolution-conversion chemistry while simultaneously suppressing polysulfide shuttling. Therefore, while ensuring high sulfur utilization, it avoids degradation of both electrodes, as well as the concomitant electrolyte consumption, leading to enhanced cycling stability. Under a practical lean electrolyte condition (electrolyte-to-sulfur ratio = 2 μL mg-1), Li-S pouch cell batteries with the QSSE demonstrate a capacity retention of 80.7% after 200 cycles, much superior to conventional liquid electrolyte cells that fail within 70 cycles. The QSSE also enables Li-S pouch cell batteries to operate across a wider temperature range (5 to 45 °C), together with improved safety under mechanical damage.

Recent progress in polyvinyl alcohol (PVA)/nanocellulose composite films for packaging applications: A comprehensive review of the impact on physico‐mechanical properties

AbstractAs society advances, the demand for innovative and sustainable food processing techniques and materials has grown significantly. The food industry, especially the food packaging sector, faces the challenge of developing cost‐effective and sustainable packaging materials to meet consumers' increasing demands. One promising solution for this is the use of biodegradable polymers such as polyvinyl alcohol (PVA), but standalone PVA cannot meet the required properties of packaging materials. The use of nanocellulose (NC) as fillers has been intensively studied recently. This review article provides a comprehensive overview of existing studies focusing on the preparation of PVA/NC composite films for packaging applications. The effects of NC loading on the physico‐mechanical properties of these films, including tensile strength, elongation, water absorption/swelling behavior, barrier properties, and optical properties, have been thoroughly examined. Overall, the general findings suggest that the reinforcement of NC in the PVA polymer matrix leads to improvements in the films' properties. Specifically, the addition of NC enhances tensile strength, reduces O2, CO2, and water vapor transmission rates, and decreases the films' propensity to absorb moisture or swell under wet conditions. However, it is important to note that the presence of NC compromises the optical properties of the films by reducing transparency, and the NC content beyond threshold level reduces the feasibility of the composite film. By synthesizing these findings, this review underscores the potential of PVA/NC composite films as promising materials for packaging applications. Moving forward, further research efforts are warranted to optimize the formulation and processing of these composite films to strike a balance between mechanical strength and optical clarity, thus advancing their practical utility in the packaging industry.

Design and Biocompatibility of Biodegradable Poly(octamethylene suberate) Nanoparticles to Treat Skin Diseases.

Biodegradable aliphatic polyester formulations as carriers for topical drug delivery show the potential to encapsulate structurally different therapeutic compounds. Poly(octamethylene suberate) (POS) nanoparticles (POS-NPs) were used as a matrix to encapsulate four therapeutic molecules used to treat skin disorders: caffeine (CF), quercetin (QR), hydrocortisone (HC), and adapalene (AD). Hydrophobicity and chemical structure of bioactive compounds (BCs) influenced the physicochemical stability of drug-loaded nanoparticles. The particle size of drug-loaded nanoparticles was between 254.9 nm for the CF-POS-NP and 1291.3 for QR-POS-NP. Particles had a negative charge from -27.6 mV (QR) to -49.2 mV (HC). Drug loading content for all BC-POS-NPs varies between 36.11 ± 1.48% (CF-POS-NP) and 66.66 ± 4.87% (AD-POS-NP), and their entrapment efficiency is relatively high (28.30 ± 1.81% and 99.95 ± 0.04%, respectively). Calorimetric analysis showed the appearance of polymorphism for AD- and HC-loaded systems and the drug's complete solubilisation into all nanoparticle formulations. FTIR and NMR spectra showed apparent drug incorporation into the polymer matrix of NPs. The encapsulation of BCs enhanced the antioxidative effect. The prepared POS nanoparticles' cytotoxicity was studied using two dermal cell lines, keratinocyte (HaCaT) cells and fibroblasts (HDFn). The nanoparticle cytotoxic effect was more substantial on HaCaT cell lines. A reconstructed human epidermis (RHE) was successfully used to investigate the penetration of polymeric NPs. Based on permeation and histology studies, HC-POS-NPs and CF-POS-NPs were shown not to be suitable for dermal applications with the explored drug concentrations. AD presents a high permeation rate and no toxic impact on RHE.

Comparison of Mechanical Property Simulations with Results of Limited Flexural Tests of Different Multi-Layer Carbon Fiber-Reinforced Polymer Composites.

This article is focused on the experimental study of flexural properties in different multi-layer carbon fiber-reinforced polymer (CFRP) composites and correlations with the results of finite element method (FEM) simulations of mechanical properties. The comparison of the results shows the possibility of reducing the number of experimental specimens for testing. The experimental study of flexural properties for four types of carbon fiber-reinforced polymer matrix composites with twill weaves (2 × 2) was carried out. As input materials, pre-impregnated carbon laminate GG 204 T and GG 630 T (prepreg) and two types of carbon fiber fabrics (GG 285 T and GG 300 T (fabric)) were used. Multi-layer samples were manufactured from two types of prepregs and two types of fabrics, which were hand-impregnated during sample preparation. The layers were stacked using same orientation. All specimens for flexural test were cut with the longer side in the weft direction. Pre-impregnated carbon laminates were further impregnated with resin DT 121H. Carbon fabrics were hand-impregnated with epoxy matrix LG 120 and hardener HG 700. To fulfill the aim of this research, finite element method (FEM)-based simulations of mechanical properties were performed. The FEM simulations and analysis were conducted in Hexagon's MSC Marc Mentat 2022.3 and Digimat 2022.4 software. This paper presents the results of actual experimental bending tests and the results of simulations of bending tests for different composite materials (mentioned previously). We created material models for simulations based on two methods-MF (Mean Field) and FE (Finite Element), and the comparative results show better agreement with the MF model. The composites (GG 285 T and GG 300 T) showed better flexural results than composites made from pre-impregnated carbon laminates (GG 204 T and GG 630 T). The difference in results for the hand-impregnated laminates was about 15% higher than for prepregs, but this is still within an acceptable tolerance as per the reported literature. The highest percentage difference of 14.25% between the simulation and the real experiment was found for the software tool Digimat FE 2022.4-GG 630 T composite. The lowest difference of 0.5% was found for the software tool Digimat MF 2022.4-GG 204 T composite. By comparing the results of the software tools with the results of the experimental measurements, it was found that the Digimat MF 2022.4 tool is closer to the results of the experimental measurements than the Digimat FE 2022.4 tool.

Active Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Films Containing Phenolic Compounds with Different Molecular Structures.

To obtain more sustainable and active food packaging materials, PHBV films containing 5% wt. of phenolic compounds with different molecular structures (ferulic acid, vanillin, and catechin) and proved antioxidant and antimicrobial properties were obtained by melt blending and compression molding. These were characterized by their structural, mechanical, barrier, and optical properties, as well as the polymer crystallization, thermal stability, and component migration in different food simulants. Phenolic compounds were homogenously integrated within the polymer matrix, affecting the film properties differently. Ferulic acid, and mainly catechin, had an anti-plasticizing effect (increasing the polymer glass transition temperature), decreasing the film extensibility and the resistance to breaking, with slight changes in the elastic modulus. In contrast, vanillin provoked a plasticizing effect, decreasing the elastic modulus without notable changes in the film extensibility while increasing the water vapor permeability. All phenolic compounds, mainly catechin, improved the oxygen barrier capacity of PHBV films and interfered with the polymer crystallization, reducing the melting point and crystallinity degree. The thermal stability of the material was little affected by the incorporation of phenols. The migration of passive components of the different PHBV films was lower than the overall migration limit in every simulant. Phenolic compounds were released to a different extent depending on their thermo-sensitivity, which affected their final content in the film, their bonding forces in the polymer matrix, and the simulant polarity. Their effective release in real foods will determine their active action for food preservation. Catechin was the best preserved, while ferulic acid was the most released.

Polyetherimide nanocomposite with enhanced mechanical, thermal and dielectric properties by incorporating synergistically exfoliated‐chemical functionalization induced hexagonal boron nitride nanosheets

AbstractThe present study aims to improve the mechanical, thermal and dielectric properties of polyetherimide (PEI) nanocomposite via simplified method, involving the creation of a nanocomposite using PEI incorporated with exfoliated‐chemical functionalization induced hexagonal boron nitride nanosheets (BNNS). XRD, FTIR and Raman elucidated the chemical structure of functionalized BNNS and indicated the success preparation of functionalized BNNS. Functionalization effectively improved the compatibility of nanocomposites and contributed to the property improvements. Morphological analysis unveiled a compact and dense microstructure within the nanocomposites in correlation with functionalized BNNS. Broad band dielectric spectroscopy revealed excellent dielectric properties of produced PEI nanocomposite. DMA testing verified a noteworthy enhancement in both Tg and storage modulus upon incorporating of BNNS. In summary, this comprehensive investigation highlights the impact of functionalized BNNS on mechanical, thermal and dielectric properties of developed PEI dielectric nanocomposite and is expected to expand the application of PEI in the field of high‐temperature energy storage.Highlights Polyetherimide (PEI) was used as polymer matrix and boron nitride derivatives as dielectric fillers to prepare PEI dielectric nanocomposite. Due to the influences of dielectric properties by interface polarization effect and the local distribution of electric field of the fillers in PEI matrix, the dielectric constant, breakdown strength and energy storage density of PEI nanocomposites were obviously improved compared with pure PEI. The effects of interfacial interactions between PBNNS and PEI contributes to the uniform dispersion and comprehensive property improvements of PEI dielectric nanocomposites. This work presents a systematic investigation into the fabrication of PEI/BNNS nanocomposite using a one‐step solution blending method, inspiring the research and development of PEI in the energy storage applications areas in the future.

The Electromagnetic Shielding Properties of Biodegradable Carbon Nanotube–Polymer Composites

In this article, the electromagnetic shielding properties of carbon nanotube–polymer nanocomposites are presented. The composite fabrication technique is spray-drying, the usage of which leads to a uniform dispersion of carbon nanotubes (CNTs) in a polymer matrix. Obtaining good filler dispersion is necessary to form a continuous, electrically conductive network of CNTs inside the polymer matrix. In the described nanocomposites, the network of conductive filler particles acts as an electromagnetic radiation barrier. For this reason, developing a highly effective fabrication method is very important. Also, the method should be simple enough to be easily adopted in an industrial environment. The authors shows in this text that both goals mentioned are achieved. The obtained nanocomposite material not only has electrostatic shielding capabilities but comprises electromagnetic shielding properties, which fulfills the main goal of the presented work. It is also worth mentioning that the developed manufacturing method allows for the usage of different fillers and polymers and thus the fabrication of materials capable of meeting a wide range of requirements.

Optimized poly(methyl methacrylate)/mixed‐phase silver vanadate nanocomposites with tuned optical properties and hydrophobicity

AbstractThe fast advancements in technology have generated significant interest in optoelectronic materials. Nevertheless, the difficulty of creating affordable materials with exceptional optical characteristics is an ongoing challenge. Therefore, the objective of this work was to tune the optical properties of poly(methyl methacrylate) (PMMA) by embedding silver vanadate (SV) in the polymer matrix. Moreover, the wettability test of the fabricated composite membranes showed a hydrophobic behavior, with the PMMA film containing 0.6 wt.% SV showed a contact angle of 86.75 ± 0.7°. Furthermore, SV showed high thermal stability with a maximum weight loss of 0.74% at 830°C, which is very high thermal stability at high temperatures. In addition, the 0.6 wt.% SV@PMMA film exhibited a maximum weight loss of 96.7% at 785°C. Moreover, the 0.6 wt.% SV@PMMA film showed the lowest indirect band gap energy (2.02 eV) compared to the other films and pure SV NPs. The findings demonstrate the potential of the synthesized films for optoelectronic applications.

Cutin-Derived Oligomers Induce Hallmark Plant Immune Responses.

The cuticle constitutes the outermost defensive barrier of most land plants. It comprises a polymeric matrix - cutin, surrounded by soluble waxes. Moreover, the cuticle constitutes the first line of defense against pathogen invasion, while also protecting the plant from many abiotic stresses. Aliphatic monomers in cutin have been suggested to act as immune elicitors in plants. This study analyses the potential of cutin oligomers to activate rapid signaling outputs reminiscent of pattern-triggered immunity (PTI) in the model plant Arabidopsis. Cutin oligomeric mixtures led to Ca2+ influx and MAPK activation. Comparable responses were measured for cutin, which was also able to induce a reactive oxygen species (ROS) burst. Furthermore, cutin oligomer treatment resulted in a unique transcriptional reprogramming profile, having many archetypal features of PTI. Targeted spectroscopic and spectrometric analyses of the cutin oligomers suggest that the elicitors compounds consist mostly of two up to three 10,16-dihydroxyhexadecanoic acid monomers linked together through ester bonds. This study demonstrates that cutin breakdown products can act as inducers of early plant immune responses, which underlying mechanisms of perception and potential use in agriculture warrant further investigation.

Effects of polymer matrix and temperature on pyrolysis of tetrabromobisphenol A: Product profiles and transformation pathways

Plastics are crucial constituents in electronic waste (e-waste) and part of the issue in e-waste recycling and environmental protection. However, previous studies have mostly focused on plastic recovery or thermal behavior of flame retardants, but not both simultaneously. The present study simulated the process of e-waste thermal treatment to explore tetrabromobisphenol A (TBBPA) pyrolysis at various temperatures using polystyrene (PS), polyvinyl chloride (PVC), and e-waste plastics as polymer matrices. Pyrolysis of TBBPA produced bromophenol, bromoacetophenone, bromobenzaldehyde, and bromobisphenol A. Co-pyrolysis with the polymer matrices increased emission factors by 1 − 2 orders of magnitude. The pyrolytic products of TBBPA, TBBPA+PS, and TBBPA+PVC were mainly low-brominated bisphenol A, while that of TBBPA in e-waste plastics was consistently bromophenol. Increasing temperature drove up the proportions of gaseous and particulate products, but lowered the relative abundances of inner wall adsorbed and residual products in pyrolysis of pure TBBPA. In co-pyrolysis of TBBPA with polymer matrix, the proportions of products in different phases were no longer governed solely by temperature, but also by polymer matrix. Co-pyrolysis of TBBPA with PS generated various bromophenols, while that with PVC produced chlorophenols and chlorobrominated bisphenol A. Transformation pathways, deduced by ab initio calculations, include hydrogenation-debromination, isopropylphenyl bond cleavage, oxidation, and chlorination.

Comprehensive correlation analysis of electromechanical behavior in high-stretchable carbon nanotube/polymer composites

In this study, a comprehensive correlation analysis of highly stretchable carbon nanotube (CNT)/polymer composites was conducted to predict the change in electrical conductivities in response to uniaxial deformation. To this end, the representative volume elements (RVEs) were generated by randomly distributing CNTs in a polymer matrix using a Monte Carlo simulation algorithm. The effective electrical conductivity was then calculated through a network model. Under uniaxial tensile strain, where the length of CNTs was maintained constant and their configuration kept straight, CNT translation and rotation were considered along with the effects of tensile strain and shrinkage, incorporating Poisson’s ratio. The RVE configuration was updated to account for changes in the network under these conditions. To achieve a strong correlation between the simulation and test results from the previously published works, numerous trade-off studies have been conducted on the RVE size, geometric periodicity, the length of CNT fibers, the mixing ratio of CNT fibers of CNT/polymer composites, and tensile strain. From the results it can be seen that excellent correlations can be only achieved with careful control of the aforementioned parameters.

Carrageenan-based functional films hybridized with carbon dots and anthocyanins from rose petals for smart food packaging applications

Multifunctional smart biopolymeric films were fabricated using rose petal anthocyanin (RPA) and carrageenan (CAR) doped with rose petal-derived carbon dots (RP-CDs). Response surface-optimized RPA showed the highest total anthocyanins and radical scavenging ability. Produced RP-CD exhibited UV absorption and high fluorescence with antibacterial/antioxidant abilities. Enrichment with 2 % RP-CD and 5 % RPA in the CAR matrix results in improved physicochemical, i.e., water contact angle, water vapor permeability, and UV-blocking properties of the fabricated material. Results showed that nanocomposite films scavenged radicals better than the neat CAR films. Zeta potential, FTIR, SEM, and XPS suggested improved compatibility/stability and enhanced elemental configuration of RP-CDs/RPA additives in the CAR polymer matrix. Perishable food packaging (minced pork and shrimp) demonstrated that nanocomposite films work efficiently and non-destructively and are promising tools for monitoring real-time freshness through interpretable visual changes from red to yellow. The CAR/RP-CDs/RPA-based nanocomposite indicator films are expected to be applied as various smart packaging materials. These films possess the ability to promptly detect changes in quality, preserve the quality, and prolong the shelf life of packaged foods.

Drug-Modified Contact Lenses-Properties, Release Kinetics, and Stability of Active Substances with Particular Emphasis on Cyclosporine A: A Review.

The following review focuses on the manufacturing and parameterizing of ocular drug delivery systems (DDS) using polymeric materials to create soft contact lenses. It discusses the types of drugs embedded into contact lenses, the various polymeric materials used in their production, methods for assessing the mechanical properties of polymers, and techniques for studying drug release kinetics. The article also explores strategies for investigating the stability of active substances released from contact lenses. It specifically emphasizes the production of soft contact lenses modified with Cyclosporine A (CyA) for the topical treatment of specific ocular conditions. The review pays attention to methods for monitoring the stability of Cyclosporine A within the discussed DDS, as well as investigating the influence of polymer matrix type on the stability and release of CyA.