Matrix Material Research Articles

Design of Locally Resonant Acoustic Metamaterials with Specified Band Gaps Using Multi-Material Topology Optimization

Locally Resonant Acoustic Metamaterials (LRAMs) have significant application potential because they can form subwavelength band gaps. However, most current research does not involve obtaining LRAMs with specified band gaps, even though such LRAMs are significant for practical applications. To address this, we propose a parameterized level-set-based topology optimization method that can use multiple materials to design LRAMs that meet specified frequency constraints. In this method, a simplified band-gap calculation approach based on the homogenization framework is introduced, establishing a restricted subsystem and an unrestricted subsystem to determine band gaps without relying on the Brillouin zone. These subsystems are specifically tailored to model the phenomena involved in band gaps in LRAMs, facilitating the opening of band gaps during optimization. In the multi-material representation model used in this method, each material, except for the matrix material, is depicted using a similar combinatorial formulation of level-set functions. This model reduces direct conversion between materials other than the matrix material, thereby enhancing the band-gap optimization of LRAMs. Two problems are investigated to test the method’s ability to use multiple materials to solve band-gap optimization problems with specified frequency constraints. The first involves maximizing the band-gap width while ensuring it encompasses a specified frequency range, and the second focuses on obtaining light LRAMs with a specified band gap. LRAMs with specified band gaps obtained in three-material or four-material numerical examples demonstrate the effectiveness of the proposed method. The method shows great promise for designing metamaterials to attenuate specified frequency spectra as required, such as mechanical vibrations or environmental noise.

3D printing of continuous metal fiber-reinforced recycled ABS with varying fiber loading

Purpose The current study aims to develop a 3D-printed continuous metal fiber-reinforced recycled thermoplastic composite using an in-nozzle impregnation technique. Design/methodology/approach Recycled acrylonitrile butadiene styrene (RABS) plastic was blended with virgin ABS (VABS) plastic in a ratio of 60:40 weight proportion to develop a 3D printing filament that was used as a matrix material, while post-used continuous brass wire (CBW) was used as a reinforcement. 3D printing was done by using a self-customized print head to fabricate the flexural, compression and interlaminar shear stress (ILSS) test samples to evaluate the bending, compressive and ILSS properties of the build samples and compared with VABS and RABS-B samples. Moreover, the physical properties of the samples were also analyzed. Findings Upon three-point bend, compression and ILSS testing, it was found that RABS-B/CBW composite 3D printed with 0.7 mm layer width exhibited a notable improvement in maximum flexural load (Lmax), flexural stress at maximum load (sfmax), flex modulus (Ef) and work of fracture (WOF), compression modulus (Ec) and ILSS properties by 30.5%, 49.6%, 88.4% 13.8, 21.6% and 30.3% respectively. Originality/value Limited research has been conducted on the in-nozzle impregnation technique for 3D printing metal fiber-reinforced recycled thermoplastic composites. Adopting this method holds the potential to create durable and high-strength sustainable composites suitable for engineering applications, thereby diminishing dependence on virgin materials.

Neutron Reflectivity Study on the Adsorption Layer of Polyethylene Grown on Si Substrate.

To investigate the structure of the interface between polyethylene films and substrates, the neutron reflectivity (NR) of deuterated polyethylene (dPE) thin films deposited on Si substrates was measured, demonstrating water accumulation at the interface, even under ambient conditions. After leaching the thermally annealed dPE films in hot p-xylene, NR measurements were conducted on the layers remaining on the substrate, clearly revealing that the adsorption layer of dPE grew during annealing and consisted of two layers, an inner adsorption layer and an outer adsorption layer, as previously proposed for amorphous polymers. The inner adsorption layer was approximately 3.7 nm thick with a density comparable to that of the bulk. The outer adsorption layer was several nanometers thick and appeared to grow insufficiently on top of the inner adsorption layer under the annealing conditions examined in this study. This study clarifying the growth of the adsorption layer of polyethylene at the interface with an inorganic substrate is useful for improving the performance of polymer/inorganic filler nanocomposites due to the wide utility of crystalline polyolefins as polymer matrix materials in nanocomposites.

Investigation of the properties and weathering behaviour of arecanut sheath fibre reinforced epoxy composites

ABSTRACT Engineered materials having unique elements such as reinforcing phases and matrix materials, such as composites, provide improved stiffness, strength, lightweight characteristics, and corrosion resistance. The utilisation of natural fibre composites, which are derived from sustainable resources such as areca nut sheath, is on the rise because of their affordability, favourable strength-to-weight ratio, and lightweight characteristics. These composites offer a more environmentally friendly option to traditional synthetic fibre composites while also reducing the negative effects of production processes on the environment. The development of these composites has been greatly aided by areca nut sheath fibre epoxy composites, which have applications in construction materials, biodegradable packaging, and other areas. In this research, areca nut sheath reinforced epoxy composites were tested for their mechanical and thermal characteristics along with their durability (weathering). It was observed that areca nut sheath fibre reinforcement improved both the tensile, flexural and impact properties of the composites due to their effective reinforcement, fibre–matrix interaction and load bearing capability. However, this study demonstrates that composites containing 20% areca nut sheath fibres have the best tensile and flexural strengths. Weathering studies revealed that the durability slightly decreased upon exposure to moisture and vermicompost due to moisture intake by the fibres.

Enhancing the mechanical properties and thermal conductivity of Ti/AZ91 composites through integrated extrusion and rolling continuous deformation processing

With the increasing demand for highly integrated circuits to optimize energy efficiency, reduce weight, and improve mechanical properties, finding a Magnesium (Mg) matrix material with excellent mechanical strength and high thermal conductivity poses a significant challenge. In this work, titanium (Ti) particles were introduced into AZ91 (Mg-9Al-1Zn) alloy to fabricate Ti/AZ91 composites, employing a combination of stir casting, extrusion and rolling processes. This strategy simultaneously enhances the mechanical properties and thermal conductivity of the Ti/AZ91 composites compared with AZ91 alloy. The incorporation of Ti particles serves to refine grains, expediting the formation of Mg17Al12 phase within the Mg matrix. Optimal comprehensive mechanical properties are attained in 10 wt% Ti/AZ91 composite, exhibiting an ultimate tensile strength of 365 MPa, an elongation of 11.9 %, and a significantly low wear rate of 4.548×10−3 mm3/m. Notably, the 10 wt% Ti/AZ91 composite shows a 41.1 % reduction in wear rate relative to the AZ91 alloy, attributed to the incorporation of hard Ti particles. Furthermore, the thermal conductivity of the 2.5 wt% Ti/AZ91 composite exhibits a significant enhancement over that of the AZ91 alloy. Detailed discussions are provided on the fundamental mechanisms responsible for strengthening, wear resistance, and thermally conductive in Ti/AZ91 composites. These results highlight the substantial potential of Ti/AZ91 composites for lightweight structural applications, such as highly integrated circuits requiring excellent mechanical properties and high thermal conductivity.

Tribological and microstructural characteristics of Al2O3–LM6 semi-solid cast composite synthesized by dual mixed slurry process

The purpose of this work is to analyze the impact of reinforced Al2O3–LM6 aluminum composite made with dual mixed slurry for semi-solid casting with stirring, which is documented according to microstructure and wear properties. Under dry sliding pin-on-disk conditions, the composition and surface morphology of worn surfaces were carefully examined for the 10 N applied force, 1.2 m/s sliding speed, and sliding distances up to 750 m. Experimental findings indicate that Al2O3 reinforcement with semi-solid dual slurry effects give outstanding resistance against the adhesive wear. Microstructure, EDS, and XRD results from worn surface evaluation all show evidence of protective layers, which helps explain the reason for the rate of wear decreased due to processing. In this experiment, LM6 serves as the matrix material and Al2O3 as reinforcement. Al2O3–LM6 semi-solid cast composite was created via a dual mixed slurry technique with temperature control close to the solidus line for varying compositions. This work reports a substantial relationship between metallurgical and mechanical parameters. Mechanical properties and wear characteristics have been investigated.

Full‐Color and High‐Resolution Femtosecond Laser Patterning of Perovskite Quantum Dots in Polyacrylonitrile Matrix

AbstractLaser patterning of perovskite quantum dots (PQDs) in polymer matrix enables in situ synthesis, easy integration, and much improved long‐term stability, holding great promises for varieties of photonics, and optoelectronics applications. Although multi‐color PQD patterns have been demonstrated through tuning the halide stoichiometry, it remains significantly challenging to achieve full‐color patterns due to the slow and spontaneous crystallization of the chlorinated perovskite precursor at room temperature. Herein, polyacrylonitrile (PAN) is introduced to serve as the matrix material, the excess cyano groups of which would coordinate with dissociative cesium and lead cations in the precursor film, leading to the suppression of the unprompted crystallization process. Taking advantage of the nonthermal and contactless ultrafast femtosecond laser, full‐color PQDs are in situ fabricated by tuning the halide stoichiometry in the PAN matrix, with the emission wavelength in the range of 425–685 nm, spanning from deep blue to deep red color, and a sub‐diffraction feature size of ≈400 nm. The approach allows ultrafine and programmable fabrication of full‐color PQD arrays and arbitrary patterns with high resolution and stability. This facile, efficient, and reliable technique believed to offer a novel pathway for precise manufacturing of various photonic or optoelectronic devices based on patterned PQDs.

Bone matrix properties in adults with osteogenesis imperfecta are not adversely affected by Setrusumab - a sclerostin neutralizing antibody.

Osteogenesis imperfecta (OI) is a skeletal dysplasia characterized by low bone mass and frequent fractures. Children with OI are commonly treated with bisphosphonates to reduce fracture rate, but treatment options for adults are limited. In the Phase 2b ASTEROID trial, setrusumab (a sclerostin neutralizing antibody, SclAb) improved bone density and strength in adults with type I, III and IV OI. Here, we investigate bone matrix material properties in tetracycline-labeled trans-iliac biopsies from three groups: i) control: individuals with no metabolic bone disease, ii) OI: individuals with OI, iii) SclAb-OI: individuals with OI after six months of setrusumab treatment (as part of the ASTEROID trial). In addition to bone histomorphometry, bone mineral and matrix properties were evaluated with nanoindentation, Raman spectroscopy, second harmonic generation imaging, quantitative backscatter electron imaging, and small-angle x-ray scattering. Spatial locations of fluorochrome labels were identified to differentiate inter-label bone of the same tissue age and intra-cortical bone. No difference in collagen orientation was found between the groups. The bone mineral density distribution and analysis of Raman spectra indicate that OI groups have greater mean mineralization, greater relative mineral content, and lower crystallinity than the control group, which was not altered by SclAb treatment. Finally, a lower modulus and hardness were measured in the inter-label bone of the OI-SclAb group compared to the OI group. Previous studies suggest that even though bone from OI has a higher mineral content, the ECM has comparable mechanical properties. Therefore, fragility in OI may stem from contributions from other yet unexplored aspects of bone organization at higher length scales. We conclude that SclAb treatment leads to increased bone mass while not adversely affecting bone matrix properties in individuals with OI.

Microwave‐Assisted Tragacanth Gum–Based Grafted Silver Nanocomposite Hydrogel for Sustained Release Formulations of Diclofenac Sodium and Antibacterial Assay

ABSTRACTIn this work, novel tragacanth gum‐graft‐poly(2‐acrylamido‐2‐methylpropanesulfonic acid) (TG‐g‐PAMPS) hydrogel was synthesized via free radical copolymerization of TG, 2‐acrylamido‐2‐methylpropanesulfonic acid by using ammonium peroxodisulfate and N,N‐methylene‐bis‐acrylamide under microwave radiation, resulting in the cross‐linked graft copolymer network. Silver nanoparticles (SNs) were formed and stabilized by the reduction of silver nitrate using tri‐sodium citrate. The TG‐g‐PAMPS gel and its nanocomposite were characterized and confirmed using FTIR, TGA, XRD, SEM, EDS, and TEM techniques. It is observed that the presence of SNs significantly improves the swelling ability of the TG‐g‐PAMPS gel. Degradation studies of both hydrogels were studied using the soil burial method and determining the respective weight loss. The presence of SNs is found to impart significant antibacterial properties to the gel against Pseudomonas aeruginosa and Escherichia coli bacteria. Further, the TG‐g‐PAMPS gel and TG‐g‐PAMPS‐SN were evaluated as matrix materials for the release of the drug (diclofenac sodium) and the effect of SNs on the release was examined. The in‐vitro released data were analyzed using empirical equations to understand the mechanism of release. Among the various models, the released data were well fitted into the Korsmeyer–Peppas equation and the released kinetics followed non‐Fickian diffusion.

Microwave‐Assisted Tragacanth Gum–Based Grafted Silver Nanocomposite Hydrogel for Sustained Release Formulations of Diclofenac Sodium and Antibacterial Assay

ABSTRACTIn this work, novel tragacanth gum‐graft‐poly(2‐acrylamido‐2‐methylpropanesulfonic acid) (TG‐g‐PAMPS) hydrogel was synthesized via free radical copolymerization of TG, 2‐acrylamido‐2‐methylpropanesulfonic acid by using ammonium peroxodisulfate and N,N‐methylene‐bis‐acrylamide under microwave radiation, resulting in the cross‐linked graft copolymer network. Silver nanoparticles (SNs) were formed and stabilized by the reduction of silver nitrate using tri‐sodium citrate. The TG‐g‐PAMPS gel and its nanocomposite were characterized and confirmed using FTIR, TGA, XRD, SEM, EDS, and TEM techniques. It is observed that the presence of SNs significantly improves the swelling ability of the TG‐g‐PAMPS gel. Degradation studies of both hydrogels were studied using the soil burial method and determining the respective weight loss. The presence of SNs is found to impart significant antibacterial properties to the gel against Pseudomonas aeruginosa and Escherichia coli bacteria. Further, the TG‐g‐PAMPS gel and TG‐g‐PAMPS‐SN were evaluated as matrix materials for the release of the drug (diclofenac sodium) and the effect of SNs on the release was examined. The in‐vitro released data were analyzed using empirical equations to understand the mechanism of release. Among the various models, the released data were well fitted into the Korsmeyer–Peppas equation and the released kinetics followed non‐Fickian diffusion.

Hierarchically porous and single Zn atom-embedded carbon molecular sieves for H2 separations

Hierarchically porous materials containing sub-nm ultramicropores with molecular sieving abilities and microcavities with high gas diffusivity may realize energy-efficient membranes for gas separations. However, rationally designing and constructing such pores into large-area membranes enabling efficient H2 separations remains challenging. Here, we report the synthesis and utilization of hybrid carbon molecular sieve membranes with well-controlled nano- and micro-pores and single zinc atoms and clusters well-dispersed inside the nanopores via the carbonization of supramolecular mixed matrix materials containing amorphous and crystalline zeolitic imidazolate frameworks. Carbonization temperature is used to fine-tune pore sizes, achieving ultrahigh selectivity for H2/CO2 (130), H2/CH4 (2900), H2/N2 (880), and H2/C2H6 (7900) with stability against water vapor and physical aging during a continuous 120-h test.

Evaluating the impact of filler size and filler content on the stiffness, strength, and toughness of polymer nanocomposites using coarse-grained molecular dynamics

Their great versatility makes polymer nanocomposites an important class of engineering materials. In order to gain detailed insights into the nanoscale mechanisms underlying their macroscopic mechanical properties, molecular dynamics (MD) simulations are a valuable tool to complement experimental studies. In this work, we modify the analytical potential functions of an efficient bead–spring model representing a generic polymer nanocomposite to account for the breaking of covalent bonds. We perform uniaxial tensile simulations of double-notched specimens and validate the model using experimental trends for overall stiffness, strength, and toughness. First, we study the effects of sample size, notch geometry, strain rate, temperature, and molar mass for the pure thermoplastic matrix material. Second, we analyze the influence of filler size and filler content on the mechanical behavior of the polymer nanocomposite. With this study, we show that in both the development of new materials and the optimization of established materials, it is possible to gain important preliminary insights into the effects of pertinent material characteristics with a simple MD setup, which can then be further refined by increasing the complexity of the material description and the boundary conditions.

Transverse failure prediction of unidirectional carbon fiber reinforced polymer composites subjected to uniaxial and biaxial loading by stress-triaxiality-dependent computational micromechanics

Accurate characterizing the mechanical behavior of the component materials is crucial for failure predicting of unidirectional carbon fiber reinforced polymer (UD CFRP) composites. A stress-triaxiality-dependent micromechanics model is developed for the transverse failure prediction of the composites in this study, in which the stress triaxiality is innovatively adopted to define the plastic hardening behavior of the matrix material. Therefore, diverse hardening behaviors generated by heterostructures, accurate confirmation of biaxial failure, as well as hardening behavior evolution caused by stress status changes during loading process can be considered. The accuracy performance of the micromechanics model is provided by comparing the predicted results (stress–strain curves, RVE profiles and failure points) with existing experimental data and failure envelopes of failure criterion. The comparison results show that the micromechanics model can accurately capture the failure phenomenon and failure evolution mechanism of the composite under uniaxial and biaxial loadings.

Mechanical and Thermal Properties of 3D-Printed Acrylonitrile Butadiene Styrene Reinforced with Rubberwood Fiber

An additive manufacturing (AM) has become very popular due to its simplicity in producing complicated products using just one process due to the layer-by-layer addition of material, which makes it possible for more complicated products to be created. The constraint of Fused Filament Fabrication (FFF) printed components with inadequate mechanical qualities has prevented AM from being widely adopted by numerous industries. The mechanical and thermal qualities of FFF printed components which is a pure polymer could be enhanced by reinforcing the wood fiber into the polymer. In this study, the twin-screw extruder was used to produce the wood plastic composites (WPCs) filaments, which were made with ABS (Acrylonitrile Butadiene Styrene) as the matrix material and 1-3wt% rubberwood fiber (RWF) for reinforcement. The effects of the extrusion parameter, such as the volume fraction of RWF and the temperature of the extrusion process, on the 3D-printed WPCs samples were investigated. The experimental results of 3D-printed WPC sample were found that the highest compressive strength value is 24.3 MPa, obtained from the rubberwood 1wt% at the extrusion temperature 218 °C whereas the pure ABS filaments obtaining from the commercial and extrusion process gave the values of 28.9 and 14.5 MPa, respectively. The highest value of tensile strength is 8.4 MPa with the rubberwood 2wt% and temperature 198 °C whereas the pure ABS filaments obtaining from the commercial and extrusion process gave the values of 10.9 and 7.4 MPa, respectively. The morphological analysis of the 3D-printed WPC sample was observed to exhibit an effect of printing process. The result showed that an increasing temperature of extrusion process increases both tensile and compressive strengths of the samples whereas an increasing amount of fiber increases the tensile strength but decreased the compressive strength. Analysis of variance demonstrated linear factor and 2-way interaction factor of the extrusion parameter influence on compression and tensile strength significantly. The rubberwood 2wt% and the temperature 218 °C was suggested to achieve the suitable condition for extrusion process for the 3D-printed WPC sample. In addition, the discussions were supported with the thermal properties achieved from Thermogravimetric analysis and Differential Scanning Calorimetry.

Experimental investigation on characterization of friction stir processed AZ31-based composite

Present study has been conducted to characterize the Mg alloy namely AZ31-based composite joined by Friction stir processing (FSP) technique. This study deals with the effect of single and double passes in FSP of AZ31 Mg alloy. The single pass run in FSP is followed at tool rotation speed (N) of 1000 to 1400 rpm. Also, the double pass run in FSP was followed at these speeds without using reinforcements. The feedstock particles namely SiC, Al2O3, Cr, and Si powders were used in fabrication process. The hardness, impact strength, and tensile strength characteristics were assessed in the stir region zone, and the results indicated significant improvement in these properties. The highest values of mechanical strength were seen in the FSPed area with N = 1000 rpm at a constant transverse speed (r) of 40 mm/min. Also, the tensile strength of the two passes FSPed plates is much higher than that of the single section without any reinforcement, as revealed in previous study also. The Scanning electron microscopy (SEM) analysis is done at two different magnifications for the Silicon carbide, Alumina, Chromium, and Silicon powder reinforced composites fabricated at speed of 1000 rpm. The microstructure shows that reinforced particles were uniform dispersed into FSPed region and agglomerated with Mg matrix. Si powder produces finer microstructure as compare to SiC, Al2O3, Cr. FSP decreases the grain size of processed material. Optical Microscopy results revealed that the reinforcement particle produced a homogenous microstructure and, a refined grain and equally dispersed in matrix material without split to the particle.

Multiscale Modeling of Elastic Waves in Carbon-Nanotube-Based Composite Membranes

A multiscale model is developed for vertically aligned carbon nanotube (CNT)-based membranes that are made for water purification or gas separation. As a consequence of driving fluids through the membranes, they carry stress waves along the fiber direction. Hence, a continuum mixture theory is established for a representative volume element to characterize guided waves propagating in a periodically CNT-reinforced matrix material. The obtained coupled governing equations for the CNT-based composite are found to retain the integrity of the wave propagation phenomenon in each constituent, while allowing them to coexist under analytically derived multiscale interaction parameters. The influence of the mesoscale characteristics on the continuum behavior of the composite is demonstrated by dispersion curves of harmonic wave propagation. Analytically established continuum mixture theory for the CNT-based composite is strengthened by numerical simulations conducted in COMSOL for visualizing mode shapes and wave propagation patterns.

The thermal conductivity of graphite composite insulation boards: A theoretical and experimental study

Graphite composite insulation boards (GCIB) have emerged as a promising solution in the construction industry, offering a combination of fire resistance, high temperature stability, and excellent insulation properties. As their usage continues to increase, it is crucial to develop and validate a more accurate theoretical model for the effective design and optimization of building insulation systems. Traditional models including series and parallel models are employed for estimating the thermal conductivity of GCIB but revealed higher relative errors and lower theoretical calculation accuracy. Therefore, the primary objective is to design and validate a more efficient theoretical model for thermal conductivity prediction in GCIB. This paper investigates the thermal conductivity of GCIB under varying composition ratios by designing a novel Parallel-Series Parallel (PSP) approach. The PSP model is designed based on a single basic cell where the graphite polystyrene particles are employed as the matrix material while cement, vitrified microspheres, and silica fume are used as inclusion materials. Then, the thermal conductivity unit is divided into three parallel heat conduction subunits where the matrix materials and inclusion materials in the three subunits are integrated in a series-parallel manner to provide a more realistic representation of the heat transfer mechanisms within the composite. For a comprehensive assessment, the study encompasses theoretical analysis, empirical assessment, and finite element (FE) simulations to illustrate its thermal properties. The predicted thermal conductivity reveals perfect consensus in comparison with the FE and experimental test outcomes by achieving lower relative errors of 2.7 %∼3.8 % and 1.9 %∼ 3.0 % respectively. The model validated through numerical simulations and sample experiments illustrates a significant improvement in accuracy of about 76.4 %∼94.3 % when compared to traditional series and parallel methods. Prominently, the findings indicate that the thermal conductivity of GCIBs declines considerably as the volumetric ratio of graphite polystyrene particles (Ф1/Ф3) increases and stabilizes when the proportion reaches 10, emphasizing the importance of optimizing material composition to enhance the thermal performance of GCIB. Overall, the validated PSP model by accurately determining the thermal conductivity of GCIB serves as a reliable tool for designing and optimizing high-performance insulation materials, contributing to energy efficiency and sustainability in building and construction industries.

Investigation on ignition characteristics of charring conductive polymers stimulated by electric energy

The arc ignition based on charring conductive polymers has advantages of simple structure, low ignition power consumption and restart capacity, which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite. In order to optimize the performance of arc ignition system, it is essential to have a deeper understanding of the ignition processes and ignition characteristics of charring conductive polymers. In this paper, the thermal decomposition, electrical conductivity and thermal conductivity characteristics of charring conductive polymers with different conductive additives and matrix materials were comprehensively evaluated. An experimental investigation was conducted to determine the ignition behaviors and characteristics of different charring conductive polymers in a visual ignition combustor. The experiment result showed that the ignition delay and external energy required for ignition are negatively correlated with voltage and initial temperature of the ignition grain, but positively correlated with oxidizer flow velocity. Compared with charring conductive polymers containing multi-walled carbon nanotube, the ignition delay of charring conductive polymers with carbon black is significantly higher and the pyrolysis time is relatively longer. However, the ignition and initial flame propagation of charring conductive polymers with carbon black is more violent and more inclined to carbon particle ignition. Finally, the restart characteristic of different charring conductive polymers was studied. The ignition delay and external energy required for ignition of different charring conductive polymers all reduced with the increasing of the number of ignitions. However, the ignition characteristics would not change a lot after repeated ignition.

Tribo-mechanical performance of Al-nano TiC composites processed by microwave-assisted powder metallurgy

This study aims to investigate the microstructural, mechanical, and tribological characteristics of Al-nano TiC composites. The microwave-sintered nanocomposites were analyzed using optical and scanning electron microscopes, providing valuable insights into the spatial distribution and interaction of TiC within the matrix material. Microstructure characterization confirmed the uniform dispersion of nano TiC particles throughout the Al. Furthermore, the microwave-sintered nanocomposite samples displayed greater hardness than pure aluminum, indicating the strengthening impact of nano-TiC. Al-6 wt.% nanocomposites fabricated using microwave-sintered powder metallurgy showcased an impressive hardness rating of 51 VHN. The assessment of tribological properties revealed that a higher TiC concentration reduced wear rate, showcasing improved surface protection. However, it was observed that the friction coefficient rise with the addition of nano-TiC particles, implying changes in the bonding between the composite and the interacting surface. The thorough examination of worn surfaces yielded insights into the wear mechanisms present in the nanocomposite materials. Detailed examination of worn surfaces highlighted the formation of protective oxide layers, contributing to the improved wear resistance. This research contributes to our understanding of the complex interactions occurring during tribological processes by clarifying the morphological features of worn surfaces.

Contribution of Tregs to the promotion of constructive remodeling after decellularized extracellular matrix material implantation

Host remodeling of decellularized extracellular matrix (dECM) material through the appropriate involvement of immune cells is essential for achieving functional organ/tissue regeneration. As many studies have focused on the role of macrophages, only few have evaluated the role of regulatory T cells (Tregs) in dECM remodeling. In this study, we used a mouse model of traumatic muscle injury to determine the role of Tregs in the constructive remodeling of vascular-derived dECM. According to the results, a certain number of Tregs could be recruited after dECM implantation. Notably, using anti-CD25 to reduce the number of Tregs recruited by the dECM was significantly detrimental to material remodeling based on a significant reduction in the number of M2 macrophages. In addition, collagen and elastic fibers, which maintain the integrity and mechanical properties of the material, rapidly degraded during the early stages of implantation. In contrast, the use of CD28-SA antibodies to increase the number of Tregs recruited by dECM promoted constructive remodeling, resulting in a decreased inflammatory response at the material edge, thinning of the surrounding fibrous connective tissue, uniform infiltration of host cells, and significantly improved tissue remodeling scores. The number of M2 macrophages increased whereas that of M1 macrophages decreased. Moreover, Treg-conditioned medium further enhanced material-induced M2 macrophage polarization in vitro. Overall, Treg is an important cell type that influences constructive remodeling of the dECM. Such findings contribute to the design of next-generation biomaterials to optimize the remodeling and regeneration of dECM materials.