Matrix Inverter Research Articles

Chip-scale all-optical complex-valued matrix inverter

Matrix inversion is a fundamental and widely utilized linear algebraic operation but computationally expensive in digital-clock-based platforms. Optical computing is a new computing paradigm with high speed and energy efficiency, and the computation can be realized through light propagation. However, there is a scarcity of experimentally implemented matrix inverters that exhibit both high integration density and the capability to perform complex-valued operations in existing optical systems. For the first time, we experimentally demonstrated an iterative all-optical chip-scale processor to perform the computation of complex-valued matrix inversion using the Richardson method. Our chip-scale processor achieves an iteration speed of 10 GHz, which can facilitate ultra-fast matrix inversion with the assistance of high-speed Mach–Zehnder interferometer modulators. The convergence can be attained within 20 iterations, yielding an accuracy of 90%. The proposed chip-scale all-optical complex-valued matrix inverter represents a distinctive innovation in the field of all-optical recursive systems, offering significant potential for solving computationally intensive mathematical problems.

Series-Resonant Matrix Inverter With Asymmetrical Modulation for Improved Power Factor Correction in Flexible Induction Heating Appliances

Induction heating appliance operation is constrained by the nonlinear pot material behavior under the generated magnetic field. The equivalent load seen by the inverter varies with the intensity of the field, meaning that this variation is dependent on the mains voltage. In flexible-surface induction cooktops, this fact is combined with a high coil number and different pots to be powered simultaneously, increasing the complexity to control the transmitted power while maintaining proper mains current consumption. In this article, two noncomplementary asymmetrical modulations with in-cycle parameter variation are proposed for improved power factor correction while avoiding the need for switching frequency variation and intermodulation noise in multiload systems. The proposed strategies are analyzed and experimentally tested using a 3.6 kW multi-inverter prototype featuring five induction coils.

AI-Based Renewable Energy Inverter with Closed System Computational Control in Electricity Grids

Renewable energy is expanding worldwide. Most renewable power sources supply electricity temporarily, making them difficult to integrate into electricity infrastructure. Transceivers measure, operate, and protect renewable producers and power grids, making them an essential component in this grid connection that makes dispersed green electricity possible. The research describes a new control method to maximise energy converter performance in three-phase, four-wire distribution channels. An active filter lets inverters do many jobs. The inverter can work as both a voltage converter to inject RES-generated electricity into the grid and an active shunt filter to correct for load imbalance, harmonic current, reactive energy demand, and even with. You can do all of these things or pick and choose. A matrix inverter with a 3-phase 4-wire sequential imbalance load coupled at the common coupling can deceive the network into thinking they are a balancing load with the correct controls. DSP lab data supports MATLAB and Simulink simulation tests that show this innovative control paradigm.

A Voltage Spike Suppression Strategy Based on De-Re-Coupling Idea for the Three-Phase High-Frequency Isolated Matrix-Type Inverter

In order to solve the problem of high voltage spikes on the secondary side of the high-frequency transformer when the three-phase high-frequency isolated matrix inverter (HFIMI) operates under the conventional modulation strategies, a new modulation strategy is proposed without introducing an auxiliary circuit. In the proposed scheme, the H-bridge inverter adopts phase-shift control. The matrix converter (MC) adopts the voltage-type de- and recoupling idea, and the decoupled positive and negative group inverters are, respectively, applied with a modified Space vector pulse width modulation (SVPWM) strategy to operate synchronously with the H-bridge inverter. When the H-bridge inverter is in dead-zone mode, the switching tubes of MC are all turned <sc xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">on</small> to provide continuous flow paths for leakage inductance and output filter inductance current and suppress high voltage spikes. The operating mode of the three-phase HFIMI under the proposed modulation strategy is analyzed in detail, the realization conditions for soft switching are designed, and the soft-switching ranges are also discussed. The feasibility and validity of the voltage spike suppression strategy are verified by building a 3-kW principle prototype. The experimental results show that the voltage spikes are effectively suppressed, all switches achieve zero-voltage soft-switching, and the peak efficiency of the three-phase HFIMI can reach 95.2%.

Sequence-Based Control of an Isolated DC/AC Matrix Converter

This paper describes the control of an isolated multiphase high-frequency-link (HFL) matrix inverter by controlling the time evolution of its switching states (or, switching sequences). It is referred to as the optimal-switching-sequence-based control (OSBC). Unlike several conventional control schemes, where, typically the control is based on averaged model of the inverter and the modulation scheme sets a predetermined switching sequence, OSBC synthesizes the fundamental switching sequence depending on the control needs on the fly. For instance, OSBC can seamlessly play with the inverter switching sequences if the input voltage of the inverter changes as evident in solar or wind-based energy systems. This necessitates that OSBC use a switching-sequence-based discontinuous (instead of averaged) modeling approach. Further, the stability of the closed-loop inverter is determined in OSBC using an advanced composite Lyapunov-function based approach, which also enables one to predetermine the reachability of the inverter dynamics for a given switching sequence. Thus, optimal control in OSBC is ensured under stability bound of the switching sequence. This provides a fundamental difference between OSBC and model predictive control for inverters. This also implies that in a multiobjective OSBC, one can shift the weights of the individual cost functions to yield better inverter performance without compromising the stability.

Decoupled control of active and reactive power of a wind turbine based on DFIG and matrix converter

Wind turbines chains are increasingly used in the world and provide power, become important with technological developments. Through this present paper, we present work to improve the performance of wind turbines by the integration of a combined control mode with three different techniques: a classic PI controller, a Fuzzy logic controller and a matrix inverter. The results were much better compared to a combination without the matrix converter where the control decoupling between the active and reactive power is obtained successfully in more than a reduction of the harmonic distortion THD is very acceptable, which promotes improving the power quality produced by this type of wind chain.

A Fault-Tolerant Switching Scheme for an Isolated DC/AC Matrix Converter

A fault-tolerant scheme is proposed for a multistage isolated three-phase dc/ac matrix inverter (MI-TMI). It comprises a front-end dc/ac converter followed by an ac/pulsating-dc converter and a pulsating-dc/ac converter. The fault-tolerant scheme (FTS) ensures a consistent operation under different fault conditions in any of the three stages of the TMI mentioned previously. A fault-diagnosis scheme is outlined which identifies the source of the converter fault and the impact of when the fault onsets on the inverter is explored. Finally, detailed results on the fault-tolerant switching scheme as well as experimental validation using a fabricated MI-TMI prototype are presented.

Line-to-line Voltage Space Vector Modulation for Neutral-point Clamped Multi-level Converter with DC-link Capacitor Voltage Balancing Using Redundant Vectors

This article presents space vector modulation of line-to-line voltage for the three-phase neutral-point clamped n-level converter with DC-link capacitor voltage balancing using redundant vectors. The developed modulation strategy is based on an equivalent matrix structure of the neutral-point clamped n-level converter. The relation between the 3 × (n – 1) switching functions of the matrix converter and gate signals of transistors of the neutral-point clamped n-level converter is given. A line-to-line space vector modulation strategy for a matrix inverter is used to obtain the switching function. For one switching function, there is more than one combination to produce each output voltage. Thus, redundancies of different switch configurations for generation of intermediate voltages are used to limit the deviation of capacitor voltages. The gate signals of the neutral-point clamped n-level converter can be calculated by inversing the modeling parts. Here, line-to-line voltage space vector modulation for a neutral-point clamped n-level converter is designed without using a Parks transform. Moreover, n × (n – 1) redundant vectors are used for DC bus voltage balancing. To highlight the performances of the developed modulation strategy, simulation results are given for five- and seven-level neutral-point clamped converters. Experimental results are given for a neutral-point clamped three-level converter.

An Integration SPWM Strategy for High-Frequency Link Matrix Converter With Adaptive Commutation in One Step Based on De-Re-Coupling Idea

When matrix converter (MC) and high-frequency link (HFL) are combined together, they become more complex and gain a safe commutation for the use of high-frequency transformer. To realize energy conversion and transmission, and to achieve reliable and safe commutation at the same time are particularly important and desirable. HFL matrix converter (HFLMC) can be divided into two types: high-frequency link matrix inverter (HFLMI) and high-frequency link matrix rectifier (HFLMR). A three-phase output HFLMI is selected as the object of this study, and a novel integration sinusoidal pulse width modulation (SPWM) control strategy with one-step adaptive commutation based on De-Re-coupling idea is proposed for it. After expounding on the De-Re-coupling idea, a kind of HFLMC equivalent circuit model based on the high-frequency transformer equivalent circuit is built up. Then, a detailed analysis of the voltage stress on power devices of the HFLMC by using this model is performed. A safe operation evaluation criterion of HFLMC is also gained. A suggestion of how to select carrier wave for integration SPWM is ascertained through detail discussion, and two kinds of specific Re-coupling logic circuits are presented, and at last some experimental results are shown to make a certification for feasibility and effectiveness of the new proposed SPWM strategy.

Novel Semi-Blind ICI Equalization Algorithm for Wireless OFDM Systems

Intercarrier interference is deemed as one of the crucial problems in the wireless orthogonal frequency division multiplexing (OFDM) systems. The conventional ICI mitigation schemes involve the frequency-domain channel estimation or the additional coding, both of which require the spectral overhead and hence lead to the significant throughput reduction. Besides, the OFDM receivers using the ICI estimation rely on a large-dimensional matrix inverter with high computational complexity especially for many subcarriers such as digital video broadcasting (DVB) systems and wireless metropolitan-area networks (WMAN). To the best of our knowledge, no semi-blind ICI equalization has been addressed in the existing literature. Thus, in this paper, we propose a novel semi-blind ICI equalization scheme using the joint multiple matrix diagonalization (JMMD) algorithm to greatly reduce the intercarrier interference in OFDM. However, the well-known phase and permutation indeterminacies emerge in all blind equalization schemes. Hence we also design a few OFDM pilot blocks and propose an iterative identification method to determine the corresponding phase and permutation variants in our semi-blind scheme. Our semi-blind ICI equalization algorithm integrating the JMMD with the additional pilot-based iterative identification is very promising for the future high-throughput OFDM systems. Through Monte Carlo simulations, the QPSK-OFDM system with our proposed semi-blind ICI equalizer can achieve significantly better performance with symbol error rate reduction in several orders-of-magnitude. For the 16QAM-OFDM system, our scheme can also improve the performance over the plain OFDM system to some extent.

Twisted mass QCD for the pion electromagnetic form factor

The pion form factor is computed using quenched twisted mass QCD and the GMRES-DR matrix inverter. The momentum averaging procedure of Frezzotti and Rossi is used to remove leading lattice spacing artifacts, and numerical results for the form factor show the expected improvement with respect to the standard Wilson action. Although some matrix inverters are known to fail when applied to twisted mass QCD, GMRES-DR is found to be a viable and powerful option. Results obtained for the pion form factor are consistent with the published results from other $O(a)$ improved actions and are also consistent with the available experimental data.

Implementing the generalised hybrid Monte-Carlo algorithm

UKQCD's dynamical fermion project uses the Generalised Hybrid Monte Carlo (GHMC) algorithm to generate QCD gauge configurations for a non-perturbatively O(a) improved Wilson action with two degenerate sea-quark flavours. We describe our implementation of the algorithm on the Cray-T3E, concentrating on issues arising from code verification and performance optimisation, such as parameter tuning, reversibility, the effect of precision, the choice of matrix inverter, and the behaviour of different molecular dynamics integration schemes.