3D Printing Materials Research Articles

Mechanical Properties of Additive-Manufactured Composite-Based Resins for Permanent Indirect Restorations: A Scoping Review.

The introduction of 3D printing technology in dentistry has opened new treatment options. The ongoing development of different materials for these printing purposes has recently enabled the production of definitive indirect restorations via 3D printing. To identify relevant data, a systematic search was conducted in three databases, namely PubMed, Scopus, and Web of Science. Additionally, a manual search using individual search terms was performed. Only English, peer-reviewed articles that encompassed in vitro or in vivo research on the mechanical properties of 3D-printed composite materials were included, provided they met the predefined inclusion and exclusion criteria. After screening 1142 research articles, 14 primary studies were selected. The included studies mainly utilized digital light processing (DLP) technology, less commonly stereolithography (SLA), and once PolyJet printing technology. The material properties of various composite resins, such as VarseoSmile Crown Plus (VSC) and Crowntec (CT), were studied, including Vickers hardness, flexural strength, elastic modulus, compressive strength, tensile strength, fracture resistance, and wear. The studies aimed to compare the behavior of the tested additive composites to each other, conventional composites, and subtractive-manufactured materials. This scoping review examined the mechanical properties of composites used for 3D printing of definitive restorations. The aim was to provide a comprehensive overview of the current knowledge on this topic and identify any gaps for future research. The findings suggest that 3D-printed composites are not yet the first option for indirect restorations, due to their insufficient mechanical properties. Due to limited evidence, more research is needed in this area. Specifically, there is a need for clinical trials and long-term in vivo research.

Post-printing surface modification and functionalization of 3D-printed biomedical device.

3D printing is a technology well-suited for biomedical applications due to its ability to create highly complex and arbitrary structures from personalized designs with a fast turnaround. However, due to a limited selection of 3D-printable materials, the biofunctionality of many 3D-printed components has not been paid enough attention. In this perspective, we point out that post-3D printing modification is the solution that could close the gap between 3D printing technology and desired biomedical functions. We identify architectural reconfiguration and surface functionalization as the two main post-3D printing modification processes and discuss potential techniques for post-3D printing modification to achieve desired biofunctionality.

Application of 3D printing to create an in vitro aneurysm rupture model.

Currently available benchtop (in vitro) aneurysm models are inadequate for testing the efficacy of endovascular device treatments. Specifically, current models do not represent the mechanical instability of giant aneurysms (defined as aneurysms with 25 mm in height or width) and do not predictably rupture under simulated physiological conditions. Hence, in vitro aneurysm models with biomechanically relevant material properties and a predictable rupture timeframe are needed to accurately assess the efficacy of new medical device treatment options. Understanding the material properties of an aneurysm (e.g., shear and compression modulus) as it approaches rupture is a crucial step toward creating a pathologically relevant and sophisticated in vitro aneurysm rupture model. We investigated the change in material properties of a blood vessel, via enzymatic treatment, to simulate the degradation of an aneurysm wall and used this information to create a sophisticated aneurysm rupture model using the latest in additive manufacturing technologies (3D printing) with tissue-like materials. Mechanical properties (shear and compression modulus) of swine carotid vessels were evaluated before and after incubation with collagenase D enzyme (30 min at 37°C) to simulate the effect of biochemical activity on aneurysm wall approaching rupture compared to control vessels (untreated). Mechanical strength of a soft and flexible 3D-printed material (VCA-A30: 30 shore A hardness) was tested for comparison to these arterial vessels. This material was then used to create spherical shaped, giant-sized (25-mm diameter) aneurysm phantoms and were run under neurovascular pressures (120/80 ± 5 mmHg), beats per minute (BPM = 70) and flows representing the middle cerebral artery [MCA: 142.67 (±20.13) mL/min] using a blood analog [3.6 (±0.4) cP viscosity] with non-Newtonian shear-thinning properties. The shear modulus of swine carotid vessel before treatment was 12.2 (±2.7) KPa and compression modulus was 663.5 (±111.6) KPa. After enzymatic treatment by collagenase D, shear modulus of animal tissues reduced by 33% (p-value = .039) while compression modulus remained statistically unchanged (p-value = .615). Control group (untreated vessels) showed minimal reduction (13%, p-value = .226) in shear modulus and 78% increase (p-value = .034) in compression modulus. The shear modulus of the 3D-printed material was 228.59 (±24.82) KPa while its compression modulus was 668.90 (±13.16) KPa. This material was used to prototype a sophisticated in vitro giant aneurysm rupture model. When subjected to physiological pressures and flow rates, the untreated models consistently ruptured at ~12 min. These results indicate that aneurysm rupture can be recreated consistently in a benchtop in vitro model, utilizing the latest 3D-printed materials, connected to a physiologically relevant programmable pump. Further studies will investigate the optimization of various aneurysm dome thickness regions within the aneurysm, with tunable rupture times for comparison of aneurysm device deployment and benchtop controls based on the measurable effects of pressure and flow changes within the aneurysm models. These optimized in vitro rupture models could ultimately be used to test the efficacy of device treatment options and rupture risk by quantifying specific device rupture times and aneurysm rupture position.

Fibro-porous materials: 3D-printed hybrid porous materials for multifunctional applications

This work demonstrates the additive manufacturing of fibro-porous materials—hybrid materials with a fiber mesh integrated within the open cells of a base porous scaffold. The presented method allows seamless incorporation of fibers, with precise control of the fiber diameter and mesh density, into the scaffold without requiring any additional postprocessing steps. Here, using a gyroid pore architecture as the base scaffold, this study fabricates the fibro-porous materials using an extrusion-based additive technique and investigates their resultant sound absorption, pressure drop, mechanical stiffness, and energy absorption properties. Two-microphone normal incidence impedance tube measurements reveal significant improvements in the sound absorption performance compared to that of denser, fiberless porous material counterparts while maintaining a 33 % lighter weight. Additional tests, including pressure drop and static airflow resistivity measurements, indicate that fiber integration reduces the effective pore size and increases flow resistance, boosting sound absorption at lower frequencies. The mechanical properties are also markedly improved, with stiffness and yield stress increasing by 27 % and 37.85 %, respectively. The fibro-porous samples provide 30 % more energy absorption per unit volume due to their increased resistance to deformation. This research demonstrates that additively manufactured fibro-porous materials provide substantial multifunctional performance gains without significant weight increase. The adaptable manufacturing process is compatible with various extrudable materials and opens a new route to designing complex, customized engineering structures with application-specific functionalities.

An approach towards the development of an inclusive subject environment using additive manufacturing technologies

This research aims to identify the principles of designing the objects of the inclusive environment with the employment of additive manufacturing technologies, and to discover methods and techniques for creating an inclusive objective environment using the example of our own development. The results of the survey, which has been directed to investigate the topicality of the problem of inclusiveness in Ukraine and the means of its solution, are presented in the article. In the course of work, the principal peculiarities of three-dimensional (3D) modelling and printing technologies have been established, and promising areas of their application have been proposed. The principles of designing an inclusive objective environment have been detected with the use of photogrammetry and 3D printing, due to which the model can be constructed by considering a person’s individual physical characteristics. Moreover, due to the wide range of materials for 3D printing, various types of objects can be realized. It gives great potential for the employment of 3D printing when designing an inclusive environment and considerably simplifies the manufacturing process while taking the individual characteristics of every person into consideration.

Mechanical Properties of Carbon Fiber Reinforced Materials for 3D Printing of Ankle Foot Orthoses

Mechanical Properties of Carbon Fiber Reinforced Materials for 3D Printing of Ankle Foot Orthoses

Additive Manufacturing Technology in the Furniture Industry: Future Outlook for Developing Countries

For the past few years, the adoption of 3D printing technology has benefited various manufacturing industries, including the furniture making industry. However, this adoption has been greatly seen in industrialized countries and lacking in developing countries. Therefore, to understand fully the capability of 3D printing and its benefits, this paper review discusses recent applications of 3D printing in the furniture industry and assesses the potential it can bring for developing countries’ furniture making industry, specifically in the Philippines and other developing countries in Asia. In addition, the drawbacks it brought to the industry, and the challenges that needed to be addressed are also discussed in the paper. The paper covers various 3D printing technologies such as material extrusion, sheet lamination, powder bed fusion, and vat photopolymerization, along with different materials currently used in the furniture industry. Numerous notable examples of applications of 3D-printed furniture are also presented. Based on the review paper, it was found that the most common 3D printing technologies used in the furniture industry are Material Extrusion (MEX) and Powder Bed Fusion (PBF) specifically Fused Deposition Modelling (FDM) and Selective Laser Sintering (SLS), respectively. The most common 3D printing materials used are Polyamide (PA), Polylactic acid (PLA), and recycled Polyethylene terephthalate glycol (PETG). The paper also discusses the possible adoption of 3D printing in developing countries and explores its potential to innovate traditional furniture manufacturing processes.

Influence of Layer Thickness of 3D Printed Polyamide Against Temperature

Polyamide is one of the materials in 3D printing that can produce valuable products to meet the needs of the industry. Previous studies have proven that the layer thickness of the 3D printed material and the increase in temperature affect the mechanical and physical properties. However, only a few studies involve polyamide material as a test material, especially in analyzing the influence of the layer thickness of the printed material and the increase in temperature on the mechanical and physical properties of polyamide. Therefore, the bending properties of polyamide with different layer thicknesses at 0.1 mm, 0.2 mm and 0.3 mm and the tensile properties of the material at different temperatures at room temperature, 75˚C and 110˚C will be studied. This study will involve polyamide (PA) materials printed at three different layer heights using the Fused Deposition Modelling (FDM) process. Bending and tensile tests at different temperatures from 27˚C to 110˚C are conducted using the Instron Universal Testing Machine. The study results show that the layer height of 0.3 mm exhibits the highest flexural strength at an average rate of 11.05 MPa compared to 0.1 mm (6.7 MPa) and 0.2 mm (9.6 MPa). The tensile strength decreases when the temperature elevates, making the temperature of 110˚C have the lowest tensile value (1.591 MPa) compared to the temperature of 75˚C (1.6MPa) and 27˚C (2.1MPa). Several material characterizations such as SEM, TGA, DMA, DSC and density have been performed to study the microstructure and influence of tensile test temperature on the mechanical properties of polyamide.

Prospects for 3D-printing of clear aligners—a narrative review

Clear aligner therapy is a rapidly developing orthodontic treatment. 3D-printing technology, which enables the creation of complex geometric structures with high precision, has been used in dentistry. This article aims to summarize the various aspects of 3D-printing clear aligners and give an outlook on their future development. The traditional thermoforming technology is introduced and the principle and application of 3D-printed clear aligners and materials are introduced, as well as the application prospects of 3D-printed clear aligners. According to PRISMA statement, the relevant literature of 3D-printing clear aligner was searched in PubMed, Web of Science, Embase and other databases. We searched the related words in the MESH database and then carried out advanced searches. We read systematic review and conference papers to find the articles related to the subject and manually added and excluded articles by reading the title and abstract. The production of clear aligners combines computer-aided 3D analysis, personalized design and digital molding technology. The thickness and edges of the 3D-printed clear aligner can be digitally controlled, which allows appliance more efficiently fitted. Presently, the array of clear resins suitable for 3D-printing include photo polymeric clear methacrylate-based resin (Dental LT) (Form Labs, Somerville, Mass), aliphatic vinyl ester-polyurethane polymer (Tera Harz TC-85) (Graphy, Seoul, South Korea). They all have good biocompatibility. But no such material is currently approved on the market. Developing biocompatible resins and further improving the material’s mechanical properties will be critical for the combination of 3D-printing and clear aligners. However, the literature on 3D-printed clear aligners is limited and lacks clinical application. Further in vivo and in vitro tests, as well as additional exploration in conjunction with corresponding cytological tests, are required for the research on available materials and machinery for 3D-printing clear aligners.

Consumer's perceptions and motivations on the consumption of fortified foods and 3D food printing

Consumer attitudes and acceptance of emerging technologies in the food sector, as well as their application, are determining factors for their successful implementation. In this study, a survey was conducted in order to better know and understand the perception, motivation and consumption associated with fortified foods and 3DPF (3-Dimensional Printing Food). Key points such as food neophobia and factors involved in the opinion forming process towards 3DPF were included in the questionnaire (namely, perceived benefits, willingness to consume, food engagement, preference for familiar foods and affinity with digital tools). The results showed that the gender influences the knowledge in 3D printing as a technology and that 51.6 % of consumers are willing to try 3DPF. Consumers who want healthy food adapted to their needs are also more receptive to foods produced on 3D printers. 54.1 % of consumers indicate that if 3DPF were nutritionally richer than an equal and/or existing product on the market, they would be willing to buy it. Respondents also mentioned fruit and vegetable by-products and fish with no commercial value as the most suitable raw materials for 3D printing. Thus, it can be concluded that there is a clear motivation to try 3DPF, providing an opportunity for their inclusion in the future food chain.

Biaxial flexural strength of nanoglass and multiwalled carbon nanotubes reinforced 3D-printed denture base resins and their shear bond strength to 3D-printed and acrylic denture teeth

ObjectiveEvaluation of biaxial flexural strength (BFS) of nanoglass (NG) and multiwalled carbon nanotubes (MWCNTs) reinforced 3D-printed denture base resins and their shear bond strength (SBS) to 3D-printed and acrylic denture teeth. MethodsSilanized NG and MWCNTs were added to 3D-printed denture base resin to obtain four groups: Control, 0.25 wt% NG, 0.25 wt% MWCNTs, and a combination group with 0.25 wt% of both fillers. All specimens were tested before and after 600 cycles of thermal aging. BFS (n = 88) was tested using disk-shaped specimens (12 ×2 mm) centralized on an O ring in a universal testing machine. Weibull analysis was conducted to assess predictability of failure. SBS (n = 176) was tested for acrylic and 3D-printed denture teeth attached to bar-shaped specimens in a universal testing machine followed by failure mode analysis using stereomicroscope. Two and three-way ANOVA tests followed by Tukey post hoc test were conducted for BFS and SBS. Kruskal-Wallis test compared percent change among groups with subsequent Dunn post hoc test with Bonferroni correction (α = 0.05). ResultsBFS was affected significantly by filler content (P < 0.001) and thermal cycling (P < 0.001), with thermal cycling displaying the uppermost effect (Ƞp2 =0.551). A significant interaction between filler content, thermal cycling, and teeth type was displayed by SBS results (P < 0.001, F=10.340, Ƞp2 =0.162). The highest BFS values belonged to 0.25 % MWCNTs while the highest SBS to printed teeth was displayed by the combination. SignificanceThe combination group displayed higher BFS and SBS to printed teeth compared to control which allows 3D-printed materials to have a long-term clinical success.

Advancing sustainable construction: Terracotta component development through extrusion-based 3d printing with local clay

This study examines the use of 3D printing technology in construction, specifically the use of local clay as the primary material for developing Terracotta components. The results demonstrate the feasibility and high print quality achievable with clay, establishing it as a viable material for 3D printing in construction. The analysis of physical properties, such as shrinkage, density, and water absorption, provides valuable insights. Thermal conductivity, also examined, contributes to a comprehensive understanding of material performance. The article identifies the optimal extrusion parameters for terracotta components. The evaluations show that the water absorption rates are within standards, and the density variation ranges from 1420 to 1466 kg/m³. Additionally, there is a direct correlation between thermal conductivity and density. The compressive strengths are diverse, ranging from 18 MPa to 33 MPa. While modulus of elasticity provides essential quantitative data for understanding the mechanical behavior of printed samples when subjected to various stresses. The internal structure significantly influences compression resistance in 3D printed bricks, emphasizing its importance in design. This research highlights the potential of 3D printing, specifically with clay, in sustainable construction. It encourages further exploration of its practical applications in the industry.

Trueness of 3D-printed cobalt chromium versus titanium removable partial denture clasps.

The purpose of this in vitro study was to evaluate the trueness of removable partial denture clasps fabricated with titanium (Ti) through the selective laser melting (SLM) technique compared to cobalt-chromium alloys (CoCr). A virtual Aker clasp was designed on a scanned tooth, and SLM printers were used to print 20 claps using cobalt chromium (n = 10) and titanium alloy (n = 10). The deviation between the printed clasps and reference design was measured using the surface matching software (Geomagic control x) at rest, retentive tip, reciprocal tip, retentive shoulder, and reciprocal shoulder. An Independent t-test was used to determine the influence of 3D-printed material on the trueness (a = 0.05). The gap distance in mm between the reference design and printed in titanium showed an average of 0.0001 ±0.0544, 0.0256 ±0.1309, 0.0230 ±0.1028, 0.0701 ±0.1234, and 0.0013 ±0.0735mm in rest, reciprocal arm tip, retentive arm tip, retentive arm shoulder, and reciprocal arm shoulder, respectively. The gap distance in mm between the reference design and printed clasps in CoCr alloy showed an average of 0.0316 ±0.0692, 0.2783 ±0.1678, 0.1446 ±0.1528, 0.0315 ±0.0906, and 0.0419 ±0.1088mm in rest, reciprocal arm tip, retentive arm tip, retentive arm shoulder, and reciprocal arm shoulder, respectively. The difference between titanium and CoCr alloys at each observation site was significant. Clasps fabricated from titanium with SLM printing have the least deviation and better trueness compared to those fabricated from cobalt chromium.

GPU-accelerated OCT imaging: Real-time data processing and artifact suppression for enhanced monitoring of 3D bioprinted tissues and vascular-like networks

Optical coherence tomography (OCT) imaging technology has significant advantages in in situ and noninvasive monitoring of biological tissues. However, it still faces the following challenges: including data processing speed, image quality, and improvements in three-dimensional (3D) visualization effects. OCT technology, especially functional imaging techniques like optical coherence tomography angiography (OCTA), requires a long acquisition time and a large data size. Despite the substantial increase in the acquisition speed of swept source optical coherence tomography (SS-OCT), it still poses significant challenges for data processing. Additionally, during in situ acquisition, image artifacts resulting from interface reflections or strong reflections from biological tissues and culturing containers present obstacles to data visualization and further analysis. Firstly, a customized frequency domain filter with anti-banding suppression parameters was designed to suppress artifact noises. Then, this study proposed a graphics processing unit (GPU)-based real-time data processing pipeline for SS-OCT, achieving a measured line-process rate of 800[Formula: see text]kHz for 3D fast and high-quality data visualization. Furthermore, a GPU-based real-time data processing for CC-OCTA was integrated to acquire dynamic information. Moreover, a vascular-like network chip was prepared using extrusion-based 3D printing and sacrificial materials, with sacrificial material being printed at the desired vascular network locations and then removed to form the vascular-like network. OCTA imaging technology was used to monitor the progression of sacrificial material removal and vascular-like network formation. Therefore, GPU-based OCT enables real-time processing and visualization with artifact suppression, making it particularly suitable for in situ noninvasive longitudinal monitoring of 3D bioprinting tissue and vascular-like networks in microfluidic chips.

Biomimetic Porous Ti6Al4V Implants: A Novel Interbody Fusion Cage via Gel-Casting Technique to Promote Spine Fusion.

An interbody fusion cage (Cage) is crucial in spinal decompression and fusion procedures for restoring normal vertebral curvature and rebuilding spinal stability. Currently, these Cages suffer from issues related to mismatched elastic modulus and insufficient bone integration capability. Therefore, a gel-casting technique is utilized to fabricate a biomimetic porous titanium alloy material from Ti6Al4V powder. The biomimetic porous Ti6Al4V is compared with polyetheretherketone (PEEK) and 3D-printed Ti6Al4V materials and their respective Cages. Systematic validation is performed through mechanical testing, in vitro cell, in vivo rabbit bone defect implantation, and ovine anterior cervical discectomy and fusion experiments to evaluate the mechanical and biological performance of the materials. Although all three materials demonstrate good biocompatibility and osseointegration properties, the biomimetic porous Ti6Al4V, with its excellent mechanical properties and a structure closely resembling bone trabecular tissue, exhibited superior bone ingrowth and osseointegration performance. Compared to the PEEK and 3D-printed Ti6Al4V Cages, the biomimetic porous Ti6Al4V Cage outperforms in terms of intervertebral fusion performance, achieving excellent intervertebral fusion without the need for bone grafting, thereby enhancing cervical vertebra stability. This biomimetic porous Ti6Al4V Cage offers cost-effectiveness, presenting significant potential for clinical applications in spinal surgery.

Ecotoxicity of 3D printing material polylactic acid (PLA) on sea urchin Paracentrotus lividus

In this study, the ecotoxicity of 3D printing material [polylactic acid (PLA)] was investigated with marine echinoderms; sea urchin Paracentrotus lividus. To achieve this goal, (i) fertilization success, spermiyotoxicity, and embriyotoxicity exposed to PLA concentrations (0.001, 0.005, 0.01, 0.1, and 1 g/L) were assessed for 72 h. For this purpose, our study is important to make comprehensive evaluations to ensure the safety of bioplastic formulations and to take measures to regulate the use of additives. At the same time, the additive used to increase the durability of bioplastic materials will also allow us to understand the long-term effects on ecosystems, wildlife, and human health. Our aim is to minimize possible harm and ensure that the overall environmental impact of bioplastics remains positive.

Combination of 3D printing and knitting: the loop stitch design and its effects on tensile strength and elongation at break

ABSTRACT This study explored the creation of 3D printing knit-based structures. Furthermore, the study investigated the relationship between the mechanical performance of these structures and the changes in loop stitch design and 3D printing material. Effects on the mechanical properties of the 3D printing loop structure were evaluated with respect to loop stitch, loop head, loop leg and loop foot. This study analysed the mean differences between the values of independent variables, namely, loop stitch and print material and the values of two dependent variables (i.e. tensile strength and elongation at break) using a multivariate analysis of variance. The results revealed that the mechanical properties of the loop structure vary significantly depending on the loop stitch shape and printing material. Tensile strength is mainly affected by material, whereas elongation property is significantly affected by loop stitch shape.

Sustainable Light‐Assisted 3D Printing of Bio‐Based Microwave‐Functionalized Gallic Acid

AbstractThe development of 3D printing technologies and the requirement for more sustainable 3D printing materials is constantly growing. However, ensuring both sustainability and performance of the new materials is crucial to replace current fossil‐based polymers. Here, a bio‐based UV‐curable resin is produced in high yield from gallic acid (GA), a natural polyphenolic compound, by means of rapid and efficient microwave‐assisted methacrylation (5 min heating time and 10 min at 130 °C). The successful microwave‐assisted methacrylation with a high degree of substitution is confirmed by Fourier transform infrared (FTIR) spectroscopy and proton nuclear magnetic resonance spectroscopy. The radical UV‐photopolymerization of the methacrylated gallic acid (MGA) is further investigated by real‐time FTIR and differential scanning photo calorimetry (photo‐DSC) analyses, clearly demonstrating the high photo‐reactivity of MGA. Moreover, the %gel assessment demonstrates the formation of highly insoluble fractions after the UV‐curing, with 98% gel content. The photo‐rheology and rheology support the suitability of MGA for light‐assisted 3D printing. Indeed, a honeycomb and a hollow cube are 3D printed by means of the digital light processing 3D printing technique with high accuracy in a small scale. Finally, the cured‐MGA illustrates high Tg and thermal stability.

Fabrication of high internal phase emulsions (HIPEs) using pea protein isolate-hyaluronic acid-tannic acid complexes: Application of curcumin-loaded HIPEs as edible inks for 3D food printing

Pea protein isolate (PPI)-hyaluronic acid (HA)-tannic acid (TA) ternary complexes were assembled using non-covalent interactions, their potential application in 3D printing and delivery of curcumin were investigated. As the HA-to-TA ratio in the complexes changed from 1:0 to 0:1, the oil-water interfacial tension first decreased and then increased, and the secondary structure of the proteins changed. The composition of the complexes (HA-to-TA ratio) was optimized to produce high internal phase emulsions (HIPEs) containing small uniform oil droplets with good storage and thermal stability. When the HA to TA ratio is 7:1 (P-H7-T1), HIPEs exhibited better viscosity, viscoelasticity, and thixotropy, which contributed to its preferable 3D printing. Moreover, curcumin-loaded HIPEs stabilized by P-H7-T1 showed a high lipid digestibility (≈101%) and curcumin bioaccessibility (≈79%). In summary, the PPI-HA-TA-stabilized HIPEs have good potential to be 3D-printable materials that could be loaded with bioactive components.

A study on the effect of mixture constituents on washout resistance, mechanical, and transport properties in the context of underwater 3D concrete printing

Underwater layered concrete depositions, such as those obtained using 3D printing, demonstrate washout resistance, which influences layer stability, transport properties, and inter-layer mechanical strength, thus impacting its final properties. This work first focuses on understanding the compositional effect of 3D printable mortars on their washout resistance. Conventional methods for assessing washout resistance of underwater concrete are ill-suited to 3D printable materials due to different mix designs and material deposition techniques. To address this, a new protocol considering layered deposition during 3D printing was developed to evaluate the washout resistance. Interrogation of the pore structure of the printed specimens (in air and underwater environment) via water absorption and sorptivity test further establishes the influence of washout on water transport properties. The study also investigates the impact of hydroxypropyl methylcellulose (HPMC) and polyvinyl alcohol (PVA) fiber dosages on mechanical properties, including compressive strength, interlayer split tensile strength, and flexural strength. Results indicate that HPMC addition significantly improves the washout resistance, whereas PVA fibers have detrimental effect. However, optimizing the PVA fiber dosage enhances both mechanical and water transport properties of underwater printed specimen via permeable void and capillary pore structure refinement.