Leakage Of Material Research Articles

Sebaceous carcinoma of the back: a case report and literature review

BackgroundExtra ocular sebaceous carcinoma is a very rare, aggressive, malignant tumor arising in the adnexal epithelium of sebaceous gland that account for only about 25% of all sebaceous carcinomas (Wick et al. in Cancer 56(5):1163–72, 1985). The diagnosis of this tumor is difficult because its clinical appearance is atypical. The common treatment consists in wide local excision of the lesion with removal of local lymph node. We report the second case of sebaceous carcinoma involving the back. It was treated with surgical excision and sentinel lymph node biopsy.Case presentationA 69 year-old Caucasian woman presented with an erythematous, violaceus and exophytic lesion with central ulceration and leakage of purulent material in dorsal region at the level of T10–T11, measuring 7 × 6 cm in size. A biopsy of the lesion reported a moderately differentiated sebaceous carcinoma with lymph, vascular and perineural invasion. Extension studies revealed axillary lymphadenopathy and a renal lesion suggestive of angiomyolipoma based on tomographic findings. A biopsy of the axillary lymphadenopathy was performed, which was negative for malignancy. A wide excision of the lesion with a 2 cm margin and sentinel lymph node biopsy were performed. On histopathological examination was confirm the diagnosis of sebaceous carcinoma of the back. The patient had a good clinical course, and it was decided to follow up clinically every 6 months.ConclusionSebaceous carcinoma can occur in locations other than the ocular region. It is frequently difficult to diagnose and has an unpredictable prognosis. The back is a particularly unusual site for this lesion. Surgery remains the mainstay of treatment, and a sentinel lymph node biopsy can be performed instead of removing all regional lymph nodes.

Calculation and application research on real-time source term diffusion in NPP auxiliary building under accident circumstances

Abstract In the light of radioactive material leakage (due to containment bypass or failure) to the auxiliary building and its service compartments under severe accident circumstances, key techniques related to accident source terms in the nuclear emergency building were researched. During the research, the source-term diffusion and migration patterns were simulated in the building compartments, including the simulation of the gradual diffusion and decay process (driven by circulating air) of fission-derived gases and aerosol toward each compartment. Besides that, by taking a M310 unit at Fangjiashan NPP as the application object, the scenarios of initial accidents of LB/MB/SB-LOCA, MSLB and SGTR were chosen to establish a real-time diffusion calculation model for in-building radioactive source terms under nuclear accident circumstances. While considering the circumstances before and after being intervened by accident mitigation measures, the concentration distribution of radionuclides in the auxiliary building and personnel total-exposure radiation dose rate were quickly assessed online, and a basis was provided for the visualization of radiation dosage and the assessment of received radiation dosage and injury & death hazards during personnel activities outside the main control room.

Photo-thermal and temperature-regulated sodium alginate-g-mPEG/carbon nanotube hybrid fibers with improved tensile strength

Despite the remarkable potential of phase change fibers for energy storage, their practical deployment has been hindered by two crucial challenges: inadequate external thermal stimulation to induce phase transition and leakage of the phase-change material. In this study, we successfully incorporated carbon nanotubes (CNTs) into a solution of sodium alginate grafted polyethylene glycol monomethyl ether (SA-g-mPEG) and utilized wet spinning processing to fabricate CNTs/SA-g-mPEG hybrid fibers with enhanced photo-thermal conversion and robust solid-solid phase change capabilities. Upon exposure to sunlight for merely 60 s, the hybrid fibers achieved a remarkable peak temperature of 40 °C. Upon cessation of sunlight exposure, these fibers demonstrated a gradual release of thermal energy, thereby underlining their exceptional photothermal conversion and temperature regulation capabilities. Furthermore, DSC analysis revealed that, at an optimal grafting ratio of 36.6 %, the hybrid fibers exhibited ΔHc and ΔHm values of 48.23 J/g and 50.83 J/g, respectively. Notably, hybrid fibers with a grafting ratio of 20.2 % demonstrated substantial enhancements in tensile properties, achieving a maximum breaking strength of approximately 2.02 cN/dtex—an impressive 11.3 % increase compared to SA-g-mPEG composite fibers. Our findings suggest that CNTs/SA-g-mPEG hybrid fibers hold immense promise for applications in body heat storage, fabric temperature regulation, and related fields.

Dynamic Behavior of Rectangular Tanks with Limited Freeboard Under Seismic Loads: Experimental, Analytical and Machine Learning Investigations

Abstract One of the most common types of fluid storage tanks are rectangular concrete tanks placed on the ground. Ensuring the seismic performance of these tanks is crucial as, besides damage and losses during a crisis, they can lead to other crises such as fires or toxic material leaks. One pivotal factor influencing the seismic behavior of these tanks is the height of the freeboard. A comprehensive understanding of how freeboard height impacts the impulsive and convective masses is essential for the effective design and dynamic analysis of rectangular tanks. While numerous numerical and experimental studies have explored this field, the influence of various filling levels, fluid properties, and tank geometries under seismic loading conditions requires further investigation. In this study, both an experimental model and a theoretical model were subjected to different tank fill levels, tank geometries, and various freeboard heights under the influence of different earthquake records. The results showed that tank height and geometry significantly affect the changes in impulsive and convective masses. Notably, in contrast to previous studies, our results demonstrate a nonlinear relationship between freeboard height and the variations in these masses. These new findings are crucial for refining current design practices and improving the resilience of rectangular tanks in earthquake-prone regions.

Beirut 2020 explosion and health system response: An alarm for the dangerous consequences of Natech incidents in industrial cities.

The blast on August 4, 2020, which destroyed main parts of the Port of Beirut, was one of the largest chemical explosions in history. This incident is considered one of the events of the Natural Hazards Triggering Technological Accidents (Natech) group, which is accompanied by explosion, fire, and leakage of gaseous toxic materials.

3D printing, leakage-proof, and flexible phase change composites for thermal management application

Phase change composites (PCCs) have attracted much attention in the fields of thermal management due to their high latent heat. However, their risk of leakage and poor shape designability greatly limit their industrial applications. Therefore, there is an urgent need to develop leakage-proof and customizable PCCs to meet the emerging requirements of thermal management applications. Some scholars have proposed the concept of preparing PCCs by 3D printing technology, aiming to meet customized thermal management requirements of various electronic devices. Nevertheless, the phase change material leaking of PCCs under high temperature is still a tough problem to solve. In this study, expanded graphite (EG) is used as the carrier for paraffin wax (PW), which names as EP can tightly enveloping PW in its porous structure. Then, an innovative carbomer gel ink is prepared for 3D printing using EP and short carbon fiber (SCF) as thermal conductive fillers. Freeze-drying and polydimethylsiloxane (PDMS) infiltrating procedures are furtherly performed to ensure the flexibility of final PCCs samples. A maximum thermal conductivity of 2.89 W/(m·K) is obtained when the content of SCF/EP filler is 10 wt%. Importantly, the flexible PCCs prepared through this method effectively prevent the PW leaking during thermal management applications, thereby avoiding the consequent safety risks and enhancing the lifespan of electronic devices. This work opens up a promising pathway for the rapid fabrication of leakage-proof, customizable and flexible PCCs.

CNN for scalar-source distance estimation in grid-generated turbulence

Countermeasures against material leakage in industrial plants call for rapid leak source estimation techniques based on limited downstream information. Assuming that such scalar diffusion occurs in a turbulent environment, it is necessary to extract features from its instantaneous local concentration distribution and estimate the distance from the observation point to the source. To this end, we proposed an estimation method using a supervised deep learning of a convolutional neural network (CNN) and investigated its estimation performance in grid-generated turbulence fields. The grid turbulence fields were reproduced by direct numerical simulations at three Reynolds numbers (Re), and the CNN was trained using two-dimensional distribution images of passive scalars downstream. We confirmed that the images large enough to cover the spatial integral length scales of the scalar resulted in high estimation accuracy. For images with a coarsened brightness gradation, the small-scale feature of scalar fluctuations was lost, and the CNN attained a low estimation accuracy. By training the CNN with high-Re images, a high estimation accuracy was obtained, even for low-Re images. The opposite case (low-Re training and high-Re estimation) yielded low accuracy, where the CNN significantly underestimated the distance against the source. Based on these results, we discussed the generalizability and essential features to be learned by the CNN.

Shaped ionic wood for enhanced phase change performance

Wood with a porous structure is the best carrier for phase change energy storage materials, which can effectively prevent material leakage during thermal cycling and ensure its shaping effect. In this work, natural poplar wood was treated with delignification and then oxidized by TEMPO as a thermal energy storage matrix. Then, it was immersed in a solution of ethanol as the solvent, polyethylene glycol (PEG) and calcium chloride as the solutes, obtaining phase change energy storage ionic wood (DTW-PCMs). The results showed that the phase change energy storage material PEG-CaCl2 was successfully impregnated into the pore structure of wood; calcium chloride was effectively combined with –COOH in TEMPO oxidized wood for intermediate bonds and formed white complex crystals with PEG2000. The maximum absorption rate and differential scanning calorimetry (DSC) test results showed that TEMPO-oxidized poplar had a maximum absorption rate of 95.26% for PEG2000-CaCl2. Additionally, TEMPO-oxidized poplar exhibited good phase transition performance and suitable phase change temperature. The latent heat of phase transition was 86.96 J/g. Thus, the novel DTW-PCMs displayed a high potential application in the field of thermal energy storage and temperature regulation.

Scutellaria baicalensis Polysaccharide-Mediated Green Synthesis of Smaller Silver Nanoparticles with Enhanced Antimicrobial and Antibiofilm Activity.

Silver nanoparticles (AgNPs) have attracted widespread attention in multidrug-resistant bacterial infections. However, the application of AgNPs synthesized by conventional methods is restricted by its high costs, toxicity, and poor stability. Herein, a water-soluble polysaccharide (Scutellaria baicalensis polysaccharide, SBP) rich in reducing sugars was used as both the reductant and stabilizer to greenly synthesize spherical AgNPs@SBP with smaller particle sizes (11.18 ± 2.50 nm) and higher negative zeta potential (-23.05 ± 2.76 mV), which was favorable to enhance its antimicrobial activity and improve pH and thermal stability. Besides, SBP facilitated the adhesion and penetration of AgNPs@SBP to methicillin-resistant Staphylococcus aureus (MRSA) and carbapenem-resistant Escherichia coli (CREC), thus significantly enhancing its antibacterial activity (increased by 32-fold and 64-fold, respectively). Likewise, AgNPs@SBP at a low concentration (7.8 μg/mL) could effectively penetrate and inhibit nearly 90% of MRSA and CREC biofilm formation. Antimicrobial mechanism studies showed that AgNPs@SBP could lead to more severe cell membrane damage and genetic material leakage by upregulating reactive oxygen species and depolarizing mitochondrial membrane potential, ultimately resulting in the apoptosis of bacteria. Overall, the wrapping of SBP significantly enhanced the antibacterial and antibiofilm activity of AgNPs, which possessed great potential in the prevention and treatment of multidrug-resistant bacterial infections.

Synergistic enhancement of metal–organic framework-derived hierarchical porous materials towards photothermal conversion and storage properties of phase change materials

The design and synthesis of composite phase change materials that integrate photothermal conversion and latent heat storage have guiding significance for the efficient development and utilisation of solar energy. In this study, taking into consideration the advantages of metal–organic frameworks (MOFs) with adjustable structure and properties, HKUST-1-derived CuO/hierarchical porous carbon materials were employed and integrated with palmitic acid (PA) to synthesise composite phase change materials that exhibit exceptional comprehensive properties. The effects of different carbonation temperatures on HKUST-1-derived CuO/hierarchical porous carbon were analysed through a series of characterisations. The hierarchical porous structure in the blended system offers abundant pore structure and high specific surface area to prevent leakage of phase change materials. Composite phase change materials can maintain good shape stability and excellent thermal energy storage capacity. The thermal storage efficiency and photothermal conversion efficiency are 98.28% and 81.83%, respectively. Meanwhile, the thermal conductivity of the composite phase change material is 3.65 times that of pure PA. In conclusion, the MOFs derivative-based composite phase change materials designed in this study exhibited potential for thermal energy storage and can be applied to the field of solar energy conversion and storage systems.

Pulsed light treatment of whole white button mushroom (Agaricus bisporus): Kinetics and mechanism of microbial inactivation and storage study.

The whole white button mushrooms (WWBMs) are highly perishable due to susceptibility to microbial spoilage. This study explored the potential of pulsed light (PL) treatment for decontamination and shelf-life extension of WWBM. WWBM surface was inoculated with Escherichia coli, Listeria monocytogenes, and Aspergillus niger spores (8.1, 8.0, and 8.05log10CFU/g, respectively) and tested for inactivation against various PL intensities (fluence 0.13-0.75J/cm2). The kinetics and mechanism of microbial inactivation were explored, and shelf life was determined at 4, 20, and 37°C. Microbial inactivation increased with increasing PL intensity. PL-induced microbial inactivation was well explained by Weibull model with shape parameters (β-value) for E. coli, L. monocytogenes, A. niger, aerobic mesophiles, and yeast and mold as 0.87, 0.92, 0.91, 0.89, and 0.94, respectively. PL-treatment at 0.75J/cm2 resulted in >5-log cycle reduction in all inoculated and natural microorganisms. Exposure to PL led to collapse of cellular structure, ruptured cell wall, and leakage of cellular material in all microorganisms and spores along with alterations in nucleic acid and lipid bands. At 4°C, maximum shelf life of 5 days was achieved when WWBM was exposed at 0.75J/cm2. The WWBM retained 83.3% phenolics, 83.9% antioxidant capacity, and 77.4% vitamin D2 at 4°C while reducing the polyphenol oxidase and peroxidase activity by 89% and 79%. The degradation rate for quality parameters increased with storage temperature. The activation energy of the browning index affirmed it as the most sensitive quality attribute during storage. The study concluded the potential of PL treatment to prolong the shelf life of WWBM.

Applications of chitosan in the agri-food sector: A review

Chitosan is a natural and renewable polysaccharide that can form biopolymers. It is derived from the deacetylation of chitin mainly from crustaceans' shells, but also from fungi and insects. Thanks to unique characteristics such as antimicrobial effects, antioxidant properties or film forming capacities, it has triggered an important amount of research in the last decade about possible applications in industrial fields. The main application field of chitosan is the food industry where it can be used for preservation purposes and shelf-life improvement for fresh food products such as fruits or meat. For beverages, it is used for clarification and fining as well as elimination of spoilage flora in beverages like fruit juices or wine. And in agriculture, it can be used as a plant protection product through different mechanisms like the elicitation of plant defences. The mechanisms of action of chitosan on microorganisms are multiple and complex but revolve mostly around the disturbance of microorganisms’ membranes and cell walls resulting in the leakage of cell material. The use of chitosan is still minor but is promising in finding environmentally friendly alternatives to synthetic chemicals and plastics. Therefore, its characterization is primordial for the future of sustainable production and preservation processes.

Preparation and Properties of Stearic Acid/Nanocellulose Composite Phase Change Energy Storage Materials

To solve the problems of liquid phase leakage and poor thermal conductivity of organic phase change energy storage materials, a novel composite phase change energy storage material (SA/CNF) based on stearic acid (SA) and nanocellulose (CNF) was prepared in this study and added graphene to enhance its thermal conductivity. For the prepared composite phase change materials (SFs) with different ratios, shape stability, and testing experiments showed that the maximum adsorption rate of CNF on SA reached 80 %. The properties of SA/CNF were then characterized by various instruments. The results show that SA and CNF are compounded together by physical interaction. More than 93 % of SA in the composite phase change energy storage material SA/CNF is able to store and release heat through the phase change process, and the latent heat of phase change of pure SA is 206.3 J/g, while the latent heat of phase change of the composite phase change material SA/CNF with 20 % of CNF is 156.2 J/g, and they both have good cycling stability. The addition of graphene enhances the thermal conductivity of SA/CNF to a large extent, and the thermal conductivity at a graphene ratio of 5 % is 261 % higher than that of SA/CNF without graphene. SA/CNF is an environmentally friendly energy storage material with very high application prospects.

Flame-retardant shape-stabilized phase change composites with superior solar-to-thermal conversion

Building thermal management is responsible for over 40 % of total energy use, of which about 20 % is directly related to the operation of heating. Materials saving energy to heat buildings would contribute substantially to sustainability. In this study, we have developed a series of flame-retardant shape-stabilized phase change composites (PCCs) by incorporating MXene@PTA and flame-retardant phytic acid dicyandiamide (PD) into a waterborne polyurethane framework using a simple vacuum impregnation technique, and their thermophysical properties, photothermal conversion, and flammable retardant performance were systematically studied. It was found that the resulting composite, termed PMWP PCCs, achieved an enthalpy efficiency and relative enthalpy efficiency of 68.66 % and 99.7 %, respectively. And it maintained excellent shape stability even after 180min at 70 °C, which demonstrates effective inhibition of leakage of phase change material. Furthermore, the maximum temperature of PCCs without modified MXene was observed to be around 37 °C, which rose to more than 45 °C after adding modified MXene, indicating higher photothermal conversion performance. Most importantly, compared to pure PEG, the peak heat release rate and total heat release value of the modified phase change composites were found to be reduced by 6.7–35.8 % and 13.2–19 %, respectively. The results suggest that the combination of MXene and PD exhibits a synergistic flame retardant effect, enhancing the flame retardancy. These outcomes underscore the promising application potential of PMWP PCCs in the fields of thermal management and energy storage.

Preparation and characterization of expanded dickite/decanoic acid phase-change materials

The leakage of phase-change materials presents a significant challenge that impedes their application. Loading porous materials onto phase-change materials is an effective approach to addressing this issue. In this study, porous expanded dickite as a carrier was utilized to load decanoic acid and create a composite phase-change material. The loading content of decanoic acid was varied to obtain different composite phase-change materials. Fourier transform infrared spectroscopy analysis confirmed the formation of hydrogen bonds between the expanded dickite carrier and decanoic acid. Scanning electron microscopy images and energy-dispersive X-ray spectroscopy mapping results demonstrated that decanoic acid was evenly dispersed on the expanded dickite carrier without any agglomeration. The expanded dickite carrier effectively immobilized decanoic acid through hydrogen bonding, thereby preventing leakage, as long as the loading content of decanoic acid did not exceed 60%. The higher thermal conductivity of the expanded dickite carrier promoted the thermal conductivity of the expanded dickite/decanoic acid composite phase-change materials, enhancing the responsiveness of the composite phase-change materials to ambient temperature. The composite phase-change material containing 60 wt% decanoic acid exhibited excellent endothermic/exothermic cycle stability, and after six cycles, its latent heat remained stable.

Development of Macro-Encapsulated Phase-Change Material Using Composite of NaCl-Al2O3 with Characteristics of Self-Standing

Developing thermal storage materials is crucial for the efficient recovery of thermal energy. Salt-based phase-change materials have been widely studied. Despite their high thermal storage density and low cost, they still face issues such as low thermal conductivity and easy leaks. Therefore, a new type of NaCl-Al2O3@SiC@Al2O3 macrocapsule was developed to address these drawbacks, and it exhibited excellent rapid heat storage and release capabilities and was extremely stable, significantly reducing the risk of leakage at high temperatures for industrial waste heat recovery and in concentrated solar power systems above 800 °C. Thermal storage macrocapsules consisted of a double-layer encapsulation of silicon carbide and alumina and a self-standing core of NaCl-Al2O3. After enduring over 1000 h at a high temperature of 850 °C, the encapsulated phase-change material exhibited an extremely low weight loss rate of less than 5% compared with NaCl@Al2O3 and NaCl-Al2O3@Al2O3 macrocapsules, for which the weight loss rate was reduced by 25% and 10%, respectively, proving their excellent leakage prevention. The SiC powder layer, serving as an intermediate coating, further prevented leakage, while the use of Al2O3 ceramics for encapsulation enhanced the overall mechanical strength. It was innovatively discovered that the Al2O3 particles formed a network structure around the molten NaCl, playing an important role in maintaining the shape and preventing leakage of the composite thermal storage phase-change material. Furthermore, the addition of Al2O3 significantly enhanced the rapid heat storage and release rate of NaCl-Al2O3 compared to pure NaCl. This encapsulated phase-change material demonstrated outstanding durability and rapid heat storage and release performance, offering an innovative approach to the application of salt phase-change materials in the field of high temperature rapid heat storage and release and encapsulating NaCl as a high-temperature thermal storage material in a packed bed system. Compared with conventional salt-based phase-change materials, the developed product is expected to significantly improve the reliability and thermal efficiency of thermal storage systems.

Insights into effect of lignocellulosic biomass framework types on bio-based shape stable composite phase change materials

The utilization of biomass waste as framework materials to inhibit the leakage of phase change material (PCMs) has gained widespread attention. In this work, three new kinds of shape stable composite phase change materials (sscPCMs) were prepared which combined with stearic acid (SA) and peanut shell powders (PSP), poplar wood powders (PWP), and corn straw powders (CSP), respectively. The influence of lignocellulosic biomass types on the thermal energy storage performance of sscPCMs was studied by comparing three types of sscPCMs. The research results indicated that SA/CSP exhibited superior properties in terms of load capacity and thermal energy storage performance. According to leakage experiments the load capacity of SA/PSP, SA/PWP and SA/CSP was 31.67 %, 44.69 %, and 50.09 %, respectively. The phase change latent heat of SA/PSP, SA/PWP, and SA/CSP was 55.78, 84.27 and 98.47 J/g, respectively. In addition, the relationship between biomass component content and load rates was studied. The results showed that there was a positive correlation between the loading rates of SA and the ratio of holocellulose (cellulose + hemicellulose) to lignin. The results provided a promising approach for the selection of lignocellulosic biomass framework materials.

Antibacterial and Antibiofilm Potential of Ethanolic Extracts of Duguetia vallicola (Annonaceae) against in-Hospital Isolates of Pseudomonas aeruginosa.

Pseudomonas aeruginosa is an opportunistic pathogen that is especially dominant in people with cystic fibrosis; the drug resistance expressed by this pathogen and its capacity for adaptation poses a significant challenge to its treatment and control, thereby increasing morbidity and mortality rates globally. In this sense, the search for new treatment alternatives is imminent today, with products of plant origin being an excellent alternative for use. The objective of this research was to evaluate the antibacterial and antibiofilm potential and to explore the possible effect of ethanolic extracts from the wood and bark of Duguetia vallicola on the cell membrane. Microdilution assays showed the inhibition of bacterial growth by more than 50%, with the lowest concentration (62.5 μg/mL) of both extracts evaluated. Furthermore, we report the ability of both extracts to inhibit mature biofilms, with inhibition percentages between 48.4% and 93.7%. Intracellular material leakage experiments (260/280 nm), extracellular pH measurements, and fluorescence microscopy with acridine orange (AO) and ethidium bromide (EB) showed cell membrane damage. This indicates that the antibacterial action of ethanolic extracts of D. vallicola is associated with damage to the integrity of the cell membrane and consequent death of these pathogens. These results serve as a reference for future studies in establishing the mechanisms of action of these extracts.

Improving thermal conductivity of styrene ethylene butylene styrene/paraffin/boron nitride phase change composite via the sacrificial template method for battery thermal management

To address the bottleneck of easy leakage and low thermal conductivity of phase change materials (PCMs) for battery thermal management. Phase change composite (PCCs) with paraffin (PA) as the PCM, styrene ethylene butylene styrene (SEBS) as the supporting skeleton, and boron nitride (BN) as the thermally conductive filler were fabricated by the sacrificial template method. Compared with the composite prepared by melt-blending method, the thermal conductivity of PCC was improved by 27.6 % and the leakage rate was reduced by 82.4 % because the BN was rubbed with Na2SO4 under the shear provided by internal mixer. As a result, the maximum temperature and maximum temperature difference of the battery pack with PCC cooling were 35.8 % and 62.5 % lower than those without PCC cooling at 2C discharge rate. In total, this work offers a strategy for improving the thermal conductivity and the leakage-proof ability of PCCs as well as for large-scale fabrication.

A Case of Lymphorrhea after Radical Cystectomy Treated by Ultrasound-Guided Inguinal Intranodal Lymphangiography

A 76-year-old woman was diagnosed with invasive bladder cancer and underwent cystectomy, bilateral external iliac, internal iliac and obturator lymph node dissection, and bilateral cutaneous ureterostomy. Pathological findings showed no lymph node metastasis ; however, the patient had lower abdominal pain and fever from the 14th postoperative day, and computed tomography (CT) revealed fluid retention in the pelvis. Retrograde pyelography showed no leakage from the urinary tract, and a drain was placed after percutaneous puncture of the pelvic cavity. There was copious drainage fluid and its nature and composition suggested lymphorrhea. Ultrasound-guided intranodal lymphangiography revealed contrast material leakage from the bilateral lymph node dissection sites. After lymphangiography, drainage from the drain decreased. Despite the drainage being minimal yet persistent, sclerotherapy was performed, the drain was removed and the patient was discharged. After discharge, there was leakage from the site of urethral extraction, and CT revealed recurrent lymph leakage. The patient was readmitted, and a second lymphangiography was performed. The leakage from the site of urethral extraction gradually decreased, and the patient was discharged on the 59th postoperative day. CT after discharge confirmed that the lymphorrhea had shrunk in size, and there has been no recurrence since then. Lymphangiography is a promising treatment option for lymphorrhea after pelvic surgery.