Elastic Material Properties Research Articles

Elastic properties of TiS2 material at high pressure by a first-principles DFT approach

Elastic properties of TiS2 material at high pressure by a first-principles DFT approach

Fine‐Tuning of Elastic Properties by Modifying Ordering of Parallel Nanolayer Inclusions in Hard Sphere Crystals

It is known that changes on the microscopic, structural level of materials exert changes on their macroscopic properties, in particular elastic ones. This approach can be used to alter the elastic properties of materials. However, it is not easy to predict the impact of a particular change in the structure of crystals. The recent studies show that depending on the size, shape, and orientation of inclusions used, the resulting elastic properties may differ. Inclusions may enhance, weaken, or eliminate the auxetic properties in a hard sphere model. This study is focused on the influence of the spatial distribution of planar inclusions within the hard sphere crystal and its impact on its elastic properties. Periodic systems containing two nanolayer inclusions in the representative volume element, oriented orthogonally to ‐direction and in various spatial ordering, are considered. It has been shown that introducing layer inclusions causes the deterioration of auxetic properties in the ‐direction. However, the latter weakly depends on the spatial ordering of the inclusion layers. Moreover, changes in the size of the inclusion particles, combined with different ordering of the inclusion layers, can be used to coarsely and finely tune the elastic properties of the model crystal.

Effective elastic properties of 3D lattice materials with intrinsic stresses: Bottom-up spectral characterization and constitutive programming

Analytical investigations to characterize the effective mechanical properties of lattice materials allow an in-depth exploration of the parameter space efficiently following an insightful, yet elegant framework. 2D lattice materials, which have been extensively dealt with in the literature following analytical as well as numerical and experimental approaches, have limitations concerning multi-directional stiffness and Poisson's ratio tunability. The primary objective of this paper is to develop mechanics-based formulations for a more complex analysis of 3D lattices, leading to a physically insightful analytical approach capable of accounting the beam-level mechanics of pre-existing intrinsic stresses along with their interaction with 3D unit cell architecture. We have investigated the in-plane and out-of-plane effective elastic properties to portray the physics behind the deformation of 3D lattices under externally applied far-field normal and shear stresses. The considered effect of beam-level intrinsic stresses therein can be regarded as a consequence of inevitable temperature variation, pre-stress during fabrication, inelastic and non-uniform deformation, manufacturing irregularities etc. Such effects can notably impact the effective elastic properties of lattice materials, quantifying which for 3D honeycombs is the central focus of this work. Further, from the material innovation viewpoint, the intrinsic stresses can be deliberately introduced to expand the microstructural design space for effective elastic property modulation of 3D lattices. This will lead to programming of effective properties as a function of intrinsic stresses without altering the microstructural geometry and lattice density. We have proposed a generic spectral framework of analyzing 3D lattices analytically, wherein the beam-level stiffness matrix including the effect of bending, axial, shear and twisting deformations along with intrinsic stresses can be coupled with the unit cell mechanics for obtaining the effective elastic properties.

Digital rock physics: Calculation of effective elastic properties of heterogeneous materials using graphical processing units (GPUs)

An application based on graphical processing units (GPUs) applied to 3-D digital images is described for computing the linear anisotropic elastic properties of heterogeneous materials. The application can also retrieve the property contribution tensors of individual inclusions of any shape. The code can be executed on professional GPUs as well as on a basic laptop or personal computer Nvidia GPUs. The application is extremely fast: a calculation of the effective elastic properties of volumes consisting of about 7 million voxel elements (1913) takes less than 4 s of computational time using a single A100 GPU; 3 min for 100 million voxel elements (4793) using a single A100 GPU; 14 min for 350 million voxel elements (7033) using a single A100 GPU. Several comparisons against analytical solutions are provided. In addition, an evaluation of the anisotropic effective elastic properties of a 3-D digital image of a cracked Carrara marble sample is presented. The software can be downloaded from a permanent repository Zenodo, the link with a doi is given in the manuscript.

Generalized Kudryashov and Extended Auxiliary Equation Methods for Novel Solitons Solutions to (1+1)-Dimensional Doubly Dispersive Equation of Murnaghan’s Rod

Abstract In this study, the Generalized Kudryashov method and the Extended Auxiliary Equations method are employed to investigate the strongly nonlinear (1+1)-dimensional Doubly Dispersive Equation model of inhomogeneous Murnaghan’s rod for developing novel soliton solutions. These symbolic methods are famous for solving various problems involving nonlinear partial differential equations. The study finds novel solitons like hyperbolic, exponential, rational, and trigonometric. Moreover, 2D, 3D, and contour plots under tunable parameters depict graphical representations of the solutions that furnish dynamic wave behavior and insights into the material's elastic properties under strain and stress.

Impact of Nanocarbon-Coated Calcium Carbonate on Asphalt Rutting: Experimental and Numerical Analyses

Rutting is a significant form of pavement distress that arises from irreversible strains accumulating along wheel paths, directly impacting pavement safety. This research investigates the effectiveness of nanocarbon-coated micronized calcium carbonate powder as a modified filler to mitigate rutting, utilizing numerical methods via finite element software. The study specifically examines the addition of 5% by weight of this modified filler to the asphalt mix. To validate the numerical results, laboratory wheel-tracking tests were conducted on samples incorporating both conventional and modified fillers. The findings reveal that the modified calcium carbonate filler enhances the asphalt’s resistance to rutting, with the 5% inclusion demonstrating a marked improvement in durability and performance. The study also underscores the necessity of characterizing the elastic and visco-plastic properties of materials through rigorous testing methods, such as elastic modulus and dynamic creep tests, to better understand their behavior under load. Numerical analysis based on linear elastic conditions was prioritized over viscous conditions to effectively compare the results of these specialized materials. The strong correlation between the numerical simulations and laboratory results reinforces the effectiveness of finite element methods in predicting pavement behavior and optimizing asphalt mixtures.

Effects of pressure on the structural, electronic, and elastic properties of superconductor material with perovskite structure YBa2Cu3O7: insights from ab initio calculation

Effects of pressure on the structural, electronic, and elastic properties of superconductor material with perovskite structure YBa2Cu3O7: insights from ab initio calculation

Effect of random variation in input parameter on cracked orthotropic plate using extended isogeometric analysis (XIGA) under thermomechanical loading

Abstract This research introduces the Stochastic Extended Isogeometric Analysis (XIGA) method to investigate fracture behavior of isotropic and orthotropic materials under mechanical, thermal, and thermomechanical loads. Employing knot spans from Isogeometric Analysis (IGA) for domain discretization, the study utilizes identical basis functions for geometry construction and solution discretization. Utilizing Extended Finite Element Method (XFEM) enrichment functions, accurate crack face displacement discontinuity and tip singularity within the stress field are characterized. Additionally, employing a second-order perturbation technique within XIGA framework, the research derives mean and coefficient of variance values for mixed-mode Stress Intensity Factors (SIF). Stochastic variations in material elastic properties, crack length, and crack angle are considered in this computation. Credibility and robustness of the study are confirmed through comparative analyses against available literatures and Monte Carlo Simulations (MCS). The observed exceptional agreement validates the precision and reliability of the proposed stochastic XIGA method for fracture analysis in orthotropic material systems under thermomechanical loading conditions.

Auxeticity Tuning by Nanolayer Inclusion Ordering in Hard Sphere Crystals.

Designing a particular change in a system structure to achieve the desired elastic properties of materials for a given task is challenging. Recent studies of purely geometrical atomic models have shown that structural modifications on a molecular level can lead to interesting and desirable elastic properties. Still, the result of such changes is usually difficult to predict. The present work concerns the impact of nanolayer inclusion ordering in hard sphere crystals on their elastic properties, with special attention devoted to their auxetic properties. Two sets of representative models, based on cubic crystals consisting of 6×6×6 unit cells of hard spheres and containing either neighboring or separated layers of spheres of another diameter, oriented orthogonally to the [001] direction, have been studied by Monte Carlo simulations in the isothermal-isobaric (NpT) ensemble. Their elastic constants have been evaluated using the Parinello-Rahman approach. The Monte Carlo simulations showed that introducing the layer inclusions into a pure face-centered cubic (FCC) structure leads to the system's symmetry changes from cubic symmetry to tetragonal in both cases. Essential changes in the elastic properties of the systems due to layer ordering were found both for neighboring and separated inclusions. It has been found that the choice of a set of layer inclusions allows one to tune the auxetic properties in two crystallographic directions ([110][11¯0] and [101][1¯01]). In particular, this study revealed that the change in layer ordering (from six separated layers to six neighboring ones) allows for, respectively: (i) enhancing auxeticity of the system in the [101][1¯01] direction with almost loss of auxetic properties in the [110][11¯0] direction in the case of six separated layers, while (ii) in the case of six neighboring layers, keeping the auxetic properties in both auxetic directions independently of the size of spheres constituting inclusions.

Natural frequency informed finite element modal analysis method for estimating elastic properties of solid materials

Natural frequency informed finite element modal analysis method for estimating elastic properties of solid materials

Size Dependency of Elastic and Plastic Properties of Metallic Polycrystals Using Statistical Volume Elements

We present an efficient approach to evaluate the size dependency of elastic and plastic properties of metallic polycrystalline materials. Specifically, we consider different volume fractions of ferrite and martensite phases for the construction of three macroscopic domains. Statistical Volume Elements (SVEs) of different sizes are extracted from these domains using the moving window method. Linear and Crystal Plasticity (CP) simulations provide elastic and plastic properties of the SVEs such as the bulk and shear moduli, yield strength, and hardening modulus. We use a variation-based criterion to determine the Representative Volume Element (RVE) size of these properties. This RVE size corresponds to a size beyond which the given property can be idealized as homogeneous. We also use anisotropy indices and an additional RVE size criterion to determine the size limits beyond which these properties can be idealized as isotropic. Numerical results show that the plastic properties often reach their homogeneity and isotropy limits at larger sizes compared to elastic properties. This effect is more pronounced for the hardening modulus compared to the yield strength.

Multiscale modelling and characterisation of fused filament fabricated neat and graphene nanoplatelet reinforced G-polymers

AbstractIn this study, the fused filament fabrication of novel biodegradable G-polymer is investigated, including also filaments reinforced by graphene nanoplatelets. A combined framework of computational multiscale modelling and experimental studies is applied to characterise and model the mechanical behaviour of composite and nanocomposite materials, fabricated using a 3D-printer by depositing G-polymer filaments in +45$$^\circ$$ ∘ and $$-45^\circ$$ - 45 ∘ angles. The investigation is performed on both hot-extruded single filaments and 3D-printed specimens. Experimental results of hot-extruded single filaments are utilized on the microscale to extract the macroscale constitutive models. At the microscale level, representative volume elements with different percentages of penetration are analyzed to compute the effective orthotropic elastic material properties. A comprehensive comparison study is conducted using different micromechanical models, multiscale simulation outputs, and the mechanical properties resulting from experiments. The accuracy of the results obtained from the homogenization technique is validated against realistic finite element microstructural models and experimental measurements. The results demonstrate that computational homogenization, when coupled with accurate property characterisation, serves as a reliable tool for predicting the elastic response of 3D-printed parts. Furthermore, the proposed framework reduces the need for extensive experimental replication and lowers manufacturing costs.

Elastic properties identification of a bio-based material in tertiary packaging: Tools and methods development

This study focuses on the use of bio-based materials for structural purposes in the packaging field, which requires the identification of their mechanical properties at a representative scale. The mechanical properties of bio-based materials are more variable than those of traditional composite materials. In a standard characterization approach using elemental coupons under uniaxial loading, the variability depends on the chosen representative elementary volume (REV), free edges, boundary conditions, etc. for elastic properties that are not identified for representative working conditions; this could lead to the ineligibility of these bio-based materials as structural materials. This paper contributes to the debate on how to study the response of bio-based materials within a structure, here a packaging structure as a logistic unit (LU) subjected to a compressive load simulating storage and stacking conditions. In the set of tools and methods for the design of packaging materials made of bio-based materials, an elastic nonlinear geometric finite element model (FEM) and an experimental approach are presented. The FEM allows the numerical identification of zones of interest within the LU. Inevitably, the FEM classically requires input data which are elastic properties of the equivalent homogeneous material. The design of the FEM is based on a calculation-test approach using an existing reference LU and it can be summarized in two main steps. The first step concerns the development of a FEM able to restore the experimental conditions of vertical compression imposed by transport standards for packaging. The second step is based on updating the input properties of the FEM by reverse identification, to achieve the representative working condition properties, using experimental results obtained on the existing reference LU. For the reverse identification a multi-scale investigation is mandatory. For this purpose, the linear elastic part of the load/vertical displacement curves (at the LU stiffness scale) and the displacement and strain fields measured (at the local LU scale) by 3D digital image correlation (3D DIC) are evaluated. Then, FEM property updating is carried out by reducing the deviation of displacement/strain fields between FEM and experimentally measured results (3D DIC). Finally, we explain how FEM and 3D DIC help in decision-making by allowing the recognition of zones of interest in a phase of design of new LUs with the concept of Multi-Instrumented Technological Evaluator (MITE).

Deep Indentation Tests of Soft Materials Using Mobile and Stationary Devices.

Measurements of the properties of soft materials are important from the point of view of medical diagnostics of soft tissues as well as testing the quality of food products and many technical materials. One of the frequently used techniques for testing such materials, attractive due to its non-invasive nature, is the indentation technique, which does not puncture the material. The difficulty of testing soft materials, which affects the objectivity of the results, is related to the problems of stable positioning of the studied material in relation to the indentation apparatus, especially with a device held by the operator. This work concerns the comparison of test results using an indentation apparatus mounted on mobile and stationary handles. The tested materials are cylindrical samples of polyurethane foams with three different stiffnesses and the same samples with a 0.5 or 1 mm thick silicone layer. The study presented uses an apparatus with a flat cylindrical indenter, with a surface area of 1 cm2, pressed to a depth of 10 mm (so-called deep tests). Based on the recorded force changes over time, five descriptors of the indentation test were determined and compared for both types of handles. The tests performed showed that the elastic properties of foam materials alone and with a silicone layer can be effectively characterized by the maximum forces during recessing and retraction and the slopes of the recessing and retraction curves. In the case of two-layer materials, these descriptors reflect both the characteristics of the foams and the silicone layer. The results show that the above property of the deep indentation method distinguishes it from the shallow indentation method. The repeatability of the tests performed in the mobile and stationary holders were determined to be comparable.

THE EFFECT OF FREQUENCY ON THE ELASTIC PROPERTIES OF MATERIALS

The elastic properties measurement of materials is important to determine their potential application in industries. Hence, the effect of frequency on the elastic properties is crucial in estimating the material's behavior with the change of frequency. Thus, this study was conducted to determine the effect of frequency on the elastic properties of materials. Five parameters of elastic materials were found in this study: bulk modulus, shear modulus, longitudinal modulus, Young's modulus, and lame constant. The elastic properties of three samples; stainless steel, aluminium and PMMA were measured for 2.25 MHz, 5 MHz and 10 MHz frequency. The method used is non-destructive testing using pulse-echo ultrasound techniques. The findings indicated that the longitudinal modulus, Young's modulus, shear modulus, bulk modulus, and lame constant of all samples are constant as the frequency increased from 2.25 MHz to 10 MHz. In conclusion, the elastic properties of a material are independent to the change of frequency.

Mechanical reconfigurable infrared filter for stress sensing applications

In this study, we introduce a novel tunable infrared filter design aimed at stress sensor applications such as health monitoring, advanced robotics and industrial automation. The design utilizes a double-layer plasmonic frequency-selective surface (FSS) of indium tin oxide (ITO) with an aerogel inter-space region. The unique feature of this design is its ability to control the transmission pattern based on the stress exerted, which alters the distance between the two filter layers. Our approach employs both numerical simulations and a simplified model grounded in equivalent circuit theory and the transfer matrix method for accurate transmission pattern estimation where the sensor achieved a sensitivity of 20nm/MPa for average stress of 14MPa and spectrum range (λ>800nm\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\lambda >800 nm$$\\end{document}). The work provides an in-depth analysis of how layer dimensions and inter-layer distance influence both transmission and force, taking into account the elastic properties of the inter-space material.

Inverse Method to Determine Parameters for Time-Dependent and Cyclic Plastic Material Behavior from Instrumented Indentation Tests.

Indentation is a versatile method to assess the hardness of different materials along with their elastic properties. Recently, powerful approaches have been developed to determine further material properties, like yield strength, ultimate tensile strength, work-hardening rate, and even cyclic plastic properties, by a combination of indentation testing and computer simulations. The basic idea of these approaches is to simulate the indentation with known process parameters and to iteratively optimize the initially unknown material properties until just a minimum error between numerical and experimental results is achieved. In this work, we have developed a protocol for instrumented indentation tests and a procedure for the inverse analysis of the experimental data to obtain material parameters for time-dependent viscoplastic material behavior and kinematic and isotropic work-hardening. We assume the elastic material properties and the initial yield strength to be known because these values can be determined independently from indentation tests. Two optimization strategies were performed and compared for identification of the material parameters. The new inverse method for spherical indentation has been successfully applied to martensitic steel.

Identifying Heterogeneous Micromechanical Properties of Biological Tissues via Physics-Informed Neural Networks.

The heterogeneous micromechanical properties of biological tissues have profound implications across diverse medical and engineering domains. However, identifying full-field heterogeneous elastic properties of soft materials using traditional engineering approaches is fundamentally challenging due to difficulties in estimating local stress fields. Recently, there has been a growing interest in data-driven models for learning full-field mechanical responses, such as displacement and strain, from experimental or synthetic data. However, research studies on inferring full-field elastic properties of materials, a more challenging problem, are scarce, particularly for large deformation, hyperelastic materials. Here, a physics-informed machine learning approach is proposed to identify the elasticity map in nonlinear, large deformation hyperelastic materials. This study reports the prediction accuracies and computational efficiency of physics-informed neural networks (PINNs) in inferring the heterogeneous elasticity maps across materials with structural complexity that closely resemble real tissue microstructure, such as brain, tricuspid valve, and breast cancer tissues. Further, the improved architecture is applied to three hyperelastic constitutive models: Neo-Hookean, Mooney Rivlin, and Gent. The improved network architecture consistently produces accurate estimations of heterogeneous elasticity maps, even when there is up to 10% noise present in the trainingdata.

Relationship between elastic properties and energy absorption of different types of aramid and UHMWPE composites used in ballistic protection

This study aimed to analyse composite materials' mechanical and elastic properties from various aramid and ultra-high- molecular-weight polyethylene fabrics used in ballistic armour materials. Furthermore, a comprehensive analysis was conducted to examine the correlations between the energy absorption data acquired from the low-velocity impact, dynamic compressive, and ballistic impact V50 tests performed in our prior investigations and the tensile test outcomes of these composites. The research revealed a notable correlation between Poisson's ratio, elasticity modulus values, and energy absorption capability. The composite material with the lowest Poisson ratio exhibited superior energy absorption performance in all tests. Composites reinforced with unidirectional textiles have attracted attention due to their low Poisson ratio and high elasticity modulus values, resulting in exceptional energy absorption capability.

Predicting the elastic properties of Norway spruce by its morphology

Models for the elastic material properties of wood aim to predict the mechanical response of wooden structures to external loading. Traditionally, the variability of these properties in trees is described by a taxonomy of growth defects that is typically based on visual indicators in the material. This includes curvature, knots, and spiral grain models. Existing meso- and macro-scale models fail to describe the uncertainty connected to the local heterogeneity of the material. In this paper, we propose a novel meso-scale model that describes the natural variability of Norway spruce morphology and material properties based on random field theory. Our approach removes the need for a taxonomy of growth defects and enables uncertainty quantification of the stiffness and density in a straightforward fashion using simulations. This may enhance confidence for stiffness-graded applications, where the dynamic resonant behavior of wood structures is relevant and growth anomalies are present. Further, our stochastic models can generate images that realistically mimic wood patterns, which is relevant for applications like synthetic wood panels and flooring.