Marine Forearc Research Articles

Submarine canyon morphology along the Chilean marine forearc (19°S–45°S)

Convergent margins host more than half of all global submarine canyons. In this environment, the lack of cognition of the canyon morphology variation and their controls in two different types of marine forearcs (erosive and accretionary) remains exists. Based on shipborne bathymetric maps, we systematically analyze width, incision depth and slope gradient of 17 submarine canyons along the Chilean marine forearc. We divide the study area into an erosive northern area, a transitional central area, and an accretionary southern area based on trench sediment cover and in line with previous tectonic interpretations. In the northern and central areas, limited sediment supply and little erosion from infrequent turbidity currents form narrow and shallow canyons that arrive at the toe of margin. Subduction erosion contributes to a simple and regular slope morphology where regional subsidence and trench-parallel faulting activities lead to vertical crustal movement and a steep thalweg of canyons' lower reach. In contrast, frequent canyon flushing/filling turbidity currents and slope failures on the canyon walls result in a wider range of canyon width and incision depth in the south. Here, the formation of an accretionary prism generates fold and thrust ridges at the seafloor that reduce the slope gradient of canyons' lower reach. Canyon morphology within the prism region has a larger range than the non-prism (backstop) region due to the higher erodibility of the less consolidated sediment. In addition, convex-up step-shaped bedforms develop along 14 canyon thalwegs, also suggesting regional uplift/subsidence and normal faulting in the north and central region but folding and thrust faulting in the south. This work not only reveals the difference of canyon morphology on active marine forearcs but also may help to understand controls on submarine canyon morphologies along the Chilean margin as well as in other convergent margins.

Impact of the Iquique Ridge on structure and deformation of the north Chilean subduction zone

The subduction of seamounts and basement ridges affects the structure, morphology, and physical state of a convergent margin. To evaluate their impact on the seismo-tectonic setting of the subduction zone and the tectonic development of the lower subducting and upper overriding plate, it is essential to know the precise location of subducted topographic features under the marine forearc. Offshore Northern Chile, the Iquique Ridge represents a broad zone of complex and heterogeneous structure of variable width on the oceanic Nazca Plate, which complicates attempts to project it beneath the forearc of the Chilean subduction zone. Here we use a state-of-the-art seismic reflection data processing approach to map structures related to ridge subduction under the marine forearc with unprecedented accuracy and resolution and evaluate their impact on the deformation of both the plate boundary and the upper plate. We show that significant ridge-related topography is currently subducting south of 20.5 °S and that the combined effect of horst and graben subduction with subduction of Iquique ridge-related thickened and elevated crust causes an upward bulging of the entire upper plate from the plate interface up to the seafloor as well as the presence of kilometer-scale anticlinal structures observed in multibeam bathymetric data that are approximately aligned with horsts seaward of the trench. In the area affected by the subducting ridge, a frontal prism is absent, which may relate to frontal subduction erosion caused by the excess lower plate topography. In contrast farther towards the north, where only isolated seamounts subduct, a small frontal prism and a slope/apron sediment cover down to 3000 m water depth are found.

Shallow structure of the Northern Chilean marine forearc between 19°S - 21°S using multichannel seismic reflection and refraction data

Seismic investigations and scientific ocean drilling projects have documented a remarkable degree of geologic heterogeneity in marine forearc basins in convergent margins worldwide. The mechanisms for offshore basin formation and evolution are, however, often not completely understood, especially for erosive margins. This study integrates high-resolution bathymetry, seismic reflection lines, and refraction-based P-wave velocities to better understand the shallow structure of the northern Chilean erosive convergent margin between 19° and 21°S. The data resolve a regionally developed forearc basin, which contains the previously recognized upper slope-shelf Iquique Basin, and which reaches a maximum depth along the middle slope, containing up to 2 km of accumulated sediments. The basin geometry appears to be tectonically controlled by major north-south oriented crustal faults, which (to first order) govern the morphology and shallow structure of the marine forearc. We propose subsidence due to enhanced subduction erosion by high relief/seamount subduction as a mechanism for basin formation. Spatial correlation between the forearc basin and the highest slip area for the Iquique earthquake highlight the relevance of future studies to understand the relationship between the shallow structure of the marine forearc and the processes occurring on the subduction interface.

Analysis of the coseismic slip behavior for the MW = 9.1 2011 Tohoku-Oki earthquake from satellite GOCE vertical gravity gradient

Over the past decade, the three largest and most destructive earthquakes in recent history with associated tsunamis occurred: the Mw = 9.2 Sumatra-Andamam in 2004, then the Mw = 8.8 Maule in 2010, and finally the Mw = 9.1 Tohoku- Oki in 2011. Due to the technological and scientific developments achieved in recent decades, it has been possible to study and model these phenomena with unprecedented resolution and precision. In addition to the coseismic slip models, for which joint inversions of data from various sources are carried out (e.g., teleseismic data, GNSS, INSAR, and Tsunami, among others), depicting the space-time evolution of the rupture, we have high-resolution models of the degree of interseismic coupling (based on GNSS) and also maps of seismic b-value changes. Among these advances, new Earth gravity field models allow mapping densities distribution homogeneously and with a resolution (in wavelengths) of approximately the large rupture areas of great megathrust earthquakes. In this regard, the maximum resolution of GOCE-derived static models is in the order of λ/2≈66 km, while GRACE monthly solutions are in the order of λ/2≈300 km. From the study of the static and dynamic gravitational field, it has been possible to infer mass displacements associated with these events, which have been modeled and compared to the deformation inferred using other methods, yielding very good results. In this work we study the kinematic behavior of the rupture process for one of these largest events, the Mw = 9.1 Tohoku-Oki 2011 earthquake, employing the vertical gradient of gravity derived from the GOCE satellite, finding that the maximum slip occurred close to a lobe of minimum Tzz, as was observed for other case-studies in other subduction-related settings studied in previous works (e.g., the Maule earthquake and the Sumatra-Andaman earthquake, among others). In addition, from the rupture propagation using kinematic models, it can be observed that the rupture is arrested when it approaches high-density structures and, it is enhanced when connecting with lobes of low vertical gravity gradient. We also mapped a block expressed as a low Tzz lobe, developed along the marine forearc, which is controlled by a parallel-to-the-trench normal fault that accommodates subsidence during the interseismic period, as it is coupled with the subducted slab. Then, after rupturing the plate interface, this block is decoupled promoting tectonic inversion and uplift. In this way, the hypothesis that the density structure along the forearc is the ultimate first-order factor that governs the rupture process is reinforced.

Marine forearc structure of eastern Java and its role in the 1994 Java tsunami earthquake

Abstract. We resolve a previously unrecognized shallow subducting seamount from a re-processed multichannel seismic profile crossing the 1994 Mw 7.8 Java tsunami earthquake rupture area. Seamount subduction occurs where the overriding plate experiences uplift by lateral shortening and vertical thickening. Pronounced back-thrusting at the landward slope of the forearc high and the formation of splay faults branching off the landward flank of the subducting seamount are observed. The location of the seamount in relation to the 1994 earthquake hypocentre and its co-seismic slip model suggests that the seamount acted as a seismic barrier to the up-dip co-seismic rupture propagation of this moderate-size earthquake.

3D Local Earthquake Tomography of the Ecuadorian Margin in the Source Area of the 2016 Mw 7.8 Pedernales Earthquake

AbstractBased on manually analyzed waveforms recorded by the permanent Ecuadorian network and our large aftershock deployment installed after the Pedernales earthquake, we derive three‐dimensional Vp and Vp/Vs structures and earthquake locations for central coastal Ecuador using local earthquake tomography. Images highlight the features in the subducting and overriding plates down to 35 km depth. Vp anomalies (∼4.5–7.5 km/s) show the roughness of the incoming oceanic crust (OC). Vp/Vs varies from ∼1.75 to ∼1.94, averaging a value of 1.82 consistent with terranes of oceanic nature. We identify a low Vp (∼5.5 km/s) region extending along strike, in the marine forearc. To the North, we relate this low Vp and Vp/Vs (<1.80) region to a subducted seamount that might be part of the Carnegie Ridge (CR). To the South, the low Vp region is associated with high Vp/Vs (>1.85) which we interpret as deeply fractured, probably hydrated OC caused by the CR being subducted. These features play an important role in controlling the seismic behavior of the margin. While subducted seamounts might contribute to the nucleation of intermediate megathrust earthquakes in the northern segment, the CR seems to be the main feature controlling the seismicity in the region by promoting creeping and slow slip events offshore that can be linked to the updip limit of large megathrust earthquakes in the northern segment and the absence of them in the southern region over the instrumental period.

Megathrust Slip Behavior for Great Earthquakes Along the Sumatra-Andaman Subduction Zone Mapped From Satellite GOCE Gravity Field Derivatives

During the last two decades, space geodesy allowed mapping accurately rupture areas, slip distribution, and seismic coupling by obtaining refined inversion models and greatly improving the study of great megathrust earthquakes. A better understanding of these phenomena involving large areas of hundreds of square kilometers came from the last gravity satellite mission that allowed detecting mass transfer through the Earth interior. In this work, we performed direct modeling of satellite GOCE (Gravity Field and Steady-State Ocean Circulation Explorer) derived gravity gradients up to degree/order N = 200 of the harmonic expansion and then corrected this by the effect of topography. Cutting off the model up to this degree/order allows inferring mass heterogeneities located at an approximate depth of 31 km, just along the plate interface where most (but not all) significant slip occurs. Then, we compared the vertical gravity gradient to well-constrained coseismic slip models for three of the last major earthquakes along the Sunda interface. We analyzed seismic rupture behavior for recent and for historical earthquakes along this subduction margin and the relationship of the degree of interseismic coupling using the gravity signal. From this, we found that strong slip patches occurred along minima gravity gradient lobes and that the maximum vertical displacements were related quantitatively to the gravity-derived signal. The degree of interseismic coupling also presents a good correspondence to the vertical gravity gradient, showing an inverse relationship, with low degrees of coupling over regions of relatively higher density. This along-strike segmentation of the gravity signal agrees with the along-strike seismic segmentation observed from recent and historical earthquakes. The thermally controlled down-dip ending of the locked fault zone along central Sumatra also presented an inverse relationship with the density structure along the forearc inferred using our modeling. From this work, we inferred different mass heterogeneities related to persistent tectonic features along the megathrust and along the marine forearc, which may control strain accumulation and release along the megathrust. Combining these data with geodetical and seismological data could possibly delimit and monitor areas with a higher potential seismic hazard around the world.

Systematic characterization of morphotectonic variability along the Cascadia convergent margin: Implications for shallow megathrust behavior and tsunami hazards

AbstractStudies of recent destructive megathrust earthquakes and tsunamis along subduction margins in Japan, Sumatra, and Chile have linked forearc morphology and structure to megathrust behavior. This connection is based on the idea that spatial variations in the frictional behavior of the megathrust influence the tectono-morphological evolution of the upper plate. Here we present a comprehensive examination of the tectonic geomorphology, outer wedge taper, and structural vergence along the marine forearc of the Cascadia subduction zone (offshore northwestern North America). The goal is to better understand geologic controls on outer wedge strength and segmentation at spatial scales equivalent to rupture lengths of large earthquakes (≥M 6.7), and to examine potential linkages with shallow megathrust behavior.We use cross-margin profiles, spaced 25 km apart, to characterize along-strike variation in outer wedge width, steepness, and structural vergence (measured between the toe and the outer arc high). The width of the outer wedge varies between 17 and 93 km, and the steepness ranges from 0.9° to 6.5°. Hierarchical cluster analysis of outer wedge width and steepness reveals four distinct regions that also display unique patterns of structural vergence and shape of the wedge: Vancouver Island, British Columbia, Canada (average width, linear wedge, seaward and mixed vergence); Washington, USA (higher width, concave wedge, landward and mixed vergence); northern and central Oregon, USA (average width, linear and convex wedge, mixed and seaward vergence); and southern Oregon and northern California, USA (lower width, convex wedge, seaward and mixed vergence). Variability in outer wedge morphology and structure is broadly associated with along-strike megathrust segmentation inferred from differences in oceanic asthenospheric velocities, patterns of episodic tremor and slow slip, GPS models of plate locking, and the distribution of seismicity near the plate interface. In more detail, our results appear to delineate the extent, geometry, and lithology of dynamic and static backstops along the margin. Varying backstop configurations along the Cascadia margin are interpreted to represent material-strength contrasts within the wedge that appear to regulate the along- and across-strike taper and structural vergence in the outer wedge. We argue that the morphotectonic variability in the outer wedge may reflect spatial variations in shallow megathrust behavior occurring over roughly the last few million years. Comparing outer wedge taper along the Cascadia margin to a global compilation suggests that observations in the global catalog are not accurately representing the range of heterogeneity within individual margins and highlights the need for detailed margin-wide morphotectonic analyses of subduction zones worldwide.

Forearc structures and deformation along the Manila Trench

The Manila Trench subduction zone is characterized by varying tectonic structures from north to south. Analyses of new seismic reflection data and bathymetric data indicate distinct morphological and deformational patterns in the forearc region. Differences in the nature of the subducting oceanic lithosphere (i.e. seafloor relief related to seamounts and ridges, sediment supply, reactivated features and faults associated with the South China Sea opening) cause along-strike heterogeneity in the Manila Trench and the Luzon forearc region. The northern segment is classified as an accretionary margin while the southern segment is mainly an erosive margin (with a narrow, steep, and often eroded frontal wedge). This sharp contrast is attributed to abundant sediment supply to the trench in the north and to the highly eroded frontal wedge in the south due to scarce sediment supply. The southern trench segment is prone to submarine slope failures and mass wasting processes. The 17°N latitude boundary also separates the forearc basin into the North Luzon Trough and the West Luzon Trough. Associated with this is the initiation of the Scarborough Seamount Chain (South China Sea extinct spreading ridge) subduction at 16°N latitude. A combination of forearc uplift and submarine mass movements attributed to subduction of bathymetric highs near and south of 17°N latitude produced the Stewart Bank. Seamount and other seafloor spreading features induced complex responses arising to diverse forearc architectures in the southern segment. Seamounts and other seafloor spreading-related features in the subducting slab induce slope steepening and significant vertical movement in the frontal wedge and the forearc region, respectively. Deformation associated with the subduction is overprinted by shearing related to the Philippine Fault Zone splay faults with the frontal wedge shortening associated with the ongoing subduction, further complicating the forearc development in the trench and marine forearc region.

Active Tectonics of the North Chilean Marine Forearc and Adjacent Oceanic Nazca Plate

AbstractNew multibeam bathymetry allows an unprecedented view of the tectonic regime and its along‐strike heterogeneity of the North Chilean marine forearc and the oceanic Nazca Plate between 19 and 22.75°S. Combining bathymetric and backscatter information from the multibeam data with subbottom profiler and published and previously unpublished legacy seismic reflection lines, we derive a tectonic map. The new map reveals a middle and upper slope configuration dominated by pervasive extensional faulting, with some faults outlining a >500‐km‐long ridge that may represent the remnants of a Jurassic or pre‐Jurassic magmatic arc. Lower slope deformation is more variable and includes slope‐failures, normal faulting, re‐entrant embayments, and NW‐SE trending anticlines and synclines. This complex pattern likely results from the combination of subducting lower‐plate topography, gravitational forearc collapse, and the accumulation of permanent deformation over multiple earthquake cycles. We find little evidence for widespread fluid seepage despite a highly faulted upper‐plate. An explanation could be a lack of fluid sources due to the sediment starved nature of the trench and most of the upper‐plate in vicinity of the hyperarid Atacama Desert. Changes in forearc architecture partly correlate to structural variations of the oceanic Nazca Plate, which is dominated by the spreading‐related abyssal hill fabric and is regionally overprinted by the Iquique Ridge. The ridge collides with the forearc around 20–21°S. South of the ridge‐forearc intersection, bending‐related horst‐and‐grabens result in vertical seafloor offsets of hundreds of meters. To the north, plate‐bending is accommodated by reactivation of the paleo‐spreading fabric and new horst‐and‐grabens do not develop.

Heterogeneous structure of the Northern Chile marine forearc and its implications for megathrust earthquakes

Heterogeneous structure of the Northern Chile marine forearc and its implications for megathrust earthquakes

Marine Forearc Extension in the Hikurangi Margin: New Insights From High‐Resolution 3‐D Seismic Data

AbstractUpper‐plate normal faults are a widespread structural element in erosive plate margins. Increasing coverage of marine geophysical data has proven that similar features also exist in accretionary margins where horizontal compression usually results in folding and thrust faulting. There is a general lack of understanding of the role and importance of normal faulting for the structural and tectonic evolution of accretionary margins. Here we use high‐resolution 2‐D and 3‐D seismic reflection data and derived seismic attributes to map and analyze upper‐plate normal faulting in the marine forearc of the accretionary Hikurangi margin, New Zealand. We document extension of the marine forearc over a wide area along the upper continental slope. The seismically imaged normal faults show low vertical displacements, high dip angles, a preference for landward dip, and often en echelon patterns. We evaluate different processes, which may cause the observed extension, including (1) stress change during the earthquake cycle, (2) regional or local uplift and decoupling of shallow strata from compression at depth, and (3) rotation of crustal blocks and resulting differential stresses at the block boundaries. The results suggest that normal faults play an important role in the structural and tectonic evolution of accretionary margins, including the northern Hikurangi forearc.

Does permanent extensional deformation in lower forearc slopes indicate shallow plate-boundary rupture?

Seismic rupture of the shallow plate-boundary can result in large tsunamis with tragic socio-economic consequences, as exemplified by the 2011 Tohoku-Oki earthquake. To better understand the processes involved in shallow earthquake rupture in seismic gaps (where megathrust earthquakes are expected), and investigate the tsunami hazard, it is important to assess whether the region experienced shallow earthquake rupture in the past. However, there are currently no established methods to elucidate whether a margin segment has repeatedly experienced shallow earthquake rupture, with the exception of mechanical studies on subducted fault-rocks. Here we combine new swath bathymetric data, unpublished seismic reflection images, and inter-seismic seismicity to evaluate if the pattern of permanent deformation in the marine forearc of the Northern Chile seismic gap allows inferences on past earthquake behavior. While the tectonic configuration of the middle and upper slope remains similar over hundreds of kilometers along the North Chilean margin, we document permanent extensional deformation of the lower slope localized to the region 20.8°S–22°S. Critical taper analyses, the comparison of permanent deformation to inter-seismic seismicity and plate-coupling models, as well as recent observations from other subduction-zones, including the area that ruptured during the 2011 Tohoku-Oki earthquake, suggest that the normal faults at the lower slope may have resulted from shallow, possibly near-trench breaking earthquake ruptures in the past. In the adjacent margin segments, the 1995 Antofagasta, 2007 Tocopilla, and 2014 Iquique earthquakes were limited to the middle and upper-slope and the terrestrial forearc, and so are upper-plate normal faults. Our findings suggest a seismo-tectonic segmentation of the North Chilean margin that seems to be stable over multiple earthquake cycles. If our interpretations are correct, they indicate a high tsunami hazard posed by the yet un-ruptured southern segment of the seismic gap.

Links between sedimentary basin development and Pacific Basin plate kinematics recorded in Jurassic to Miocene strata on the western Alaska Peninsula

Late Jurassic to Miocene strata exposed on the western Alaska Peninsula record major changes in plate kinematics and sedimentary basin development along the northern Pacific region. These changes include Late Jurassic to Late Cretaceous accretion of the oceanic Wrangellia composite terrane, subsequent establishment of a Late Cretaceous continental volcanic arc, and middle Eocene Pacific plate reorganization and subduction initiation marked by the Alaska Peninsula–Aleutian volcanic arc. Stratigraphic descriptions and detrital zircon geochronology allow reconstruction of sediment dispersal and basinal response to these plate-scale events. Upper Jurassic strata, for example, contain a dominant population of Late Triassic;Late Jurassic detrital zircons that reflect sediment input from the adjacent oceanic Talkeetna arc located to the north into a marine forearc basin situated on the outboard side of the Wrangellia composite terrane. The dominant population of 180–140 Ma detrital zircons in the Jurassic strata is related to a large-magmatic-flux event that extended throughout the northwestern Cordillera. By Late Cretaceous time, after final suturing of the Wrangellia composite terrane, detrital zircon ages indicate the presence of a new coeval continental volcanic arc system to the north with minor sediment input from older inboard terranes. With final subduction of the Resurrection plate during early Eocene time, the southern margin of the northwestern Cordillera was again reconfigured. Along the western Alaska Peninsula, the Aleutian and Meshik volcanic arcs initiated in response to a shift toward more orthogonal subduction. These arcs are part of a mainly oceanic arc system that initiated in middle-late Eocene time and extend over 3000 km on the northern rim of the Pacific Basin. The basinal response to this event was a shift from nonmarine to marine depositional systems and to a southerly provenance. Middle Eocene through Miocene strata have detrital zircon ages that indicate recycling of the older Mesozoic forearc strata into a developing backarc basin. Dynamic subsidence associated with the change in subduction parameters and flexural subsidence associated with loading from the volcanic arc and backarc basin strata produced the southward-thickening asymmetric sedimentary package observed today. Results from this study provide insight into both the development and the reconfiguration of sedimentary basins associated with changing plate parameters along a convergent margin.

Fault zone controlled seafloor methane seepage in the rupture area of the 2010 Maule earthquake, Central Chile

AbstractSeafloor seepage of hydrocarbon‐bearing fluids has been identified in a number of marine fore arcs. However, temporal variations in seep activity and the structural and tectonic parameters that control the seepage often remain poorly constrained. Subduction zone earthquakes, for example, are often discussed to trigger seafloor seepage but causal links that go beyond theoretical considerations have not yet been fully established. This is mainly due to the inaccessibility of offshore epicentral areas, the infrequent occurrence of large earthquakes, and challenges associated with offshore monitoring of seepage over large areas and sufficient time periods. Here we report visual, geochemical, geophysical, and modeling results and observations from the Concepción Methane Seep Area (offshore Central Chile) located in the rupture area of the 2010 Mw. 8.8 Maule earthquake. High methane concentrations in the oceanic water column and a shallow subbottom depth of sulfate penetration indicate active methane seepage. The stable carbon isotope signature of the methane and hydrocarbon composition of the released gas indicate a mixture of shallow‐sourced biogenic gas and a deeper sourced thermogenic component. Pristine fissures and fractures observed at the seafloor together with seismically imaged large faults in the marine fore arc may represent effective pathways for methane migration. Upper plate fault activity with hydraulic fracturing and dilation is in line with increased normal Coulomb stress during large plate‐boundary earthquakes, as exemplarily modeled for the 2010 earthquake. On a global perspective our results point out the possible role of recurring large subduction zone earthquakes in driving hydrocarbon seepage from marine fore arcs over long timescales.

Anatomy of a megathrust: The 2010 M8.8 Maule, Chile earthquake rupture zone imaged using seismic tomography

Knowledge of seismic velocities in the seismogenic part of subduction zones can reveal how material properties may influence large ruptures. Observations of aftershocks that followed the 2010 Mw 8.8 Maule, Chile earthquake provide an exceptional dataset to examine the physical properties of a megathrust rupture zone. We manually analysed aftershocks from onshore seismic stations and ocean bottom seismometers to derive a 3-D velocity model of the rupture zone using local earthquake tomography. From the trench to the magmatic arc, our velocity model illuminates the main features within the subduction zone. We interpret an east-dipping high P-wave velocity anomaly (>6.9 km/s) as the subducting oceanic crust and a low P-wave velocity (<6.25 km/s) in the marine forearc as the accretionary complex. We find two large P-wave velocity anomalies (∼7.8 km/s) beneath the coastline. These velocities indicate an ultramafic composition, possibly related to extension and a mantle upwelling during the Triassic.We assess the role played by physical heterogeneity in governing megathrust behaviour. Greatest slip during the Maule earthquake occurred in areas of moderate P-wave velocity (6.5–7.5 km/s), where the interface is structurally more uniform. At shallow depths, high fluid pressure likely influenced the up-dip limit of seismic activity. The high velocity bodies lie above portions of the plate interface where there was reduced coseismic slip and minimal postseismic activity. The northern velocity anomaly may have acted as a structural discontinuity within the forearc, influencing the pronounced crustal seismicity in the Pichilemu region. Our work provides evidence for how the ancient geological structure of the forearc may influence the seismic behaviour of subduction megathrusts.

Imaging fluid-related subduction processes beneath Central Java (Indonesia) using seismic attenuation tomography

We use local earthquake data observed by the amphibious, temporary seismic MERAMEX array to derive spatial variations of seismic attenuation (Qp) in the crust and upper mantle beneath Central Java. The path-averaged attenuation values (t∗) of a high quality subset of 84 local earthquakes were calculated by a spectral inversion technique. These 1929 t∗-values inverted by a least-squares tomographic inversion yield the 3D distribution of the specific attenuation (Qp). Analysis of the model resolution matrix and synthetic recovery tests were used to investigate the confidence of the Qp-model. We notice a prominent zone of increased attenuation beneath and north of the modern volcanic arc at depths down to 15km. Most of this anomaly seems to be related to the Eocene–Miocene Kendeng Basin (mainly in the eastern part of the study area). Enhanced attenuation is also found in the upper crust in the direct vicinity of recent volcanoes pointing towards zones of partial melts, presence of fluids and increased temperatures in the middle to upper crust. The middle and lower crust seems not to be associated with strong heating and the presence of melts throughout the arc. Enhanced attenuation above the subducting slab beneath the marine forearc seems to be due to the presence of fluids.

Submarine weathering of silicate minerals and the extent of pore water freshening at active continental margins

In order to investigate how submarine weathering processes may affect the water balance of sediments at convergent plate margins, six sediment cores were retrieved off Central Chile at water depth between ∼800 and 4000m. The sediment solid phase was analyzed for its major element composition and the pore fluids were analyzed for dissolved sulfate, sulfide, total alkalinity, major cations, chloride, bromide, iodide, hydrocarbons as well as the carbon isotopic composition of methane.Because of negligible weathering on land, surface sediments off Central Chile are rich in reactive silicate minerals and have a bulk composition similar to volcanic rocks in the adjacent Andes. Deep-sourced fluxes of alkalinity, cations and chloride indicate that silicate minerals are subject to weathering in the forearc during burial. Comparison of deep-sourced signals with data from nearby Ocean Drilling Program Sites reveals two different types of weathering processes: In shallow (tens of meters), methanic sediments of slope basins with high organic carbon burial rates, reactive silicate minerals undergo incongruent dissolution through reaction with CO2 from methanogenesis. At greater burial depth (hundreds of meters), silicate weathering is dominated by authigenic smectite formation. This process is accompanied by uptake of water into the clay interlayers thus leading to elevated salinities in the surrounding pore water. Deep-seated smectite formation is more widespread than shallow silicate dissolution, as it is independent from the availability of CO2 from methanogenesis. Although solute transport is not focused enough to form cold seeps in the proper sense, tectonically induced, diffuse fluid flow transfers the deep-seated signal of smectite formation into the shallow sediments.The temperature-controlled conversion of smectite to illite is considered the most important dehydration process in marine forearc environments (depth of kilometers). However, in agreement with other studies at active margins (e.g. Aleutians, Cascadia, Nankai Trough) and despite ubiquitous evidence for smectite formation, little evidence for seafloor seepage of dehydration fluids could be found off Central Chile. We argue that the circular process of pore water uptake during smectite formation and release upon illitization implies a balanced freshwater budget and therefore a rather limited potential for net pore water freshening on a margin-wide scale. According to this rationale, pore water freshening at seafloor seeps preferentially occurs at lower latitudes (Central America, Barbados, Mediterranean Ridge) where terrestrial weathering is more intense thus leading to external (i.e. detrital) smectite and thus freshwater inputs to the subduction system.

Active tectonics of the South Chilean marine fore arc (35°S–40°S)

The South Chilean marine fore arc (35°S–40°S) is separated into four tectonic segments, Concepción North, Concepción South, Nahuelbuta, and Tolten (from north to south). These are each characterized by their individual tectonic geomorphology and reflect different ways of mechanical and kinematic interaction of the convergent Nazca and South American plates. Splay faults that cut through continental framework rock are seismically imaged in both Concepción segments and the Tolten Segment. Additionally, the Concepción South Segment exhibits prominent upper plate normal faults. Normal faults apparently relate to uplift caused by sediment underthrusting at depth. This has led to oversteepening and gravitational collapse of the marine fore arc. There is also evidence for sediment underthrusting and basal accretion to the overriding plate in the Tolten Segment. There, uplift of the continental slope has created a landward inclined seafloor over a latitudinal distance of 50 km. In the Nahuelbuta Segment transpressive upper plate faults, aligned oblique to the direction of plate motion, control the seafloor morphology. Based on a unique acoustic data set including &gt;90% of bathymetric coverage of the continental slope we are able to reveal an along‐strike heterogeneity of a complexly deformed marine fore arc which had escaped attention in previous studies that only considered the structure along transects normal to the plate margin.

Upper lithospheric structure of the subduction zone offshore of southern Arauco peninsula, Chile, at ∼38°S

A joint interpretation of swath bathymetric, seismic refraction, wide‐angle reflection, and multichannel seismic data was used to derive a detailed tomographic image of the Nazca–South America subduction zone system offshore southern Arauco peninsula, Chile at ∼38°S. Here, the trench basin is filled with up to 2.2 km of sediments, and the Mocha Fracture Zone (FZ) is obliquely subducting underneath the South American plate. The velocity model derived from the tomographic inversion consists of a ∼7‐km‐thick oceanic crust and shows P wave velocities typical for mature fast spreading crust in the seaward section of the profile, with uppermost mantle velocities &gt;8.4 km s−1. In the trench–outer rise area, the top of incoming oceanic plate is pervasively fractured and likely hydrated as shown by extensional faults, horst‐and‐graben structures, and a reduction of both crustal and mantle velocities. These slow velocities are interpreted in terms of extensional bending‐related faulting leading to fracturing and hydration in the upper part of the oceanic lithosphere. The incoming Mocha FZ coincides with an area of even slower velocities and thinning of the oceanic crust (10–15% thinning), suggesting that the incoming fracture zone may enhance the flux of chemically bound water into the subduction zone. Slow mantle velocities occur down to a maximum depth of 6–8 km into the upper mantle, where mantle temperatures are estimated to be 400–430°C. In the overriding plate, the tomographic model reveals two prominent velocity transition zones characterized by steep lateral velocity gradients, resulting in a seismic segmentation of the marine fore arc. The margin is composed of three main domains: (1) a ∼20 km wide frontal prism below the continental slope with Vp ≤ 3.5 km s−1, (2) a ∼50 km area with Vp = 4.5–5.5 km s−1, interpreted as a paleoaccretionary complex, and (3) the seaward edge of the Paleozoic continental framework with Vp ≥ 6.0 km s−1. Frontal prism velocities are noticeably lower than those found in the northern erosional Chile margin, confirming recent accretionary processes in south central Chile.