Marine Environment Research Articles

Phyllanthus urinaria extract as a potential anti-corrosion agent for steel reinforcement in simulated marine environments

<i>Phyllanthus urinaria</i> extract as a potential anti-corrosion agent for steel reinforcement in simulated marine environments

Exploring local chlorine generation through seawater electrolysis to Extend optical sensor lifespan in marine environments

Biofouling in marine optical sensors poses a significant challenge as it can compromise data accuracy and instrument functionality. This study investigates the effectiveness of local chlorine generation by seawater electrolysis in mitigating biological fouling and extending the operational lifespan of optical oceanographic instruments. Eight similar turbidity probes integrated with a local chlorine generation system, along with a turbidity probe constructed from ABS and another from PLA with copper filament, were developed for testing in the marine environment. The chlorine probes were designed into two groups: four utilizing standard FTO glass and four featuring FTO glass coated with platinum nanoparticles. Each set of probes employed different excitation currents for chlorine generation. All probes underwent laboratory calibration using formazine before deployment in a coastal environment for 97 days. The findings demonstrate a correlation with higher electrical power leading to prolonged operation intervals free from biofouling interference. Additionally, probes coated with platinum nanoparticles demonstrate higher performance in comparison to those with standard FTO glass. The copper probe did not effectively shield the optical transducers from microfouling, although it effectively demonstrated its efficacy in protecting the structural housing of the device. Overall, this work offers a compelling in situ demonstration of local chlorine generation as a promising strategy for enhancing the performance and longevity of optical oceanographic instruments in marine environments.

Formation mechanism of Fe oxyhydroxides and behavior of metals during the oxidation of submarine sulfides at the Wocan-1 hydrothermal field, Carlsberg Ridge

Hydrothermal sulfides undergo complex oxidation process under seawater conditions, which has the potential to impact resource values and marine environments. However, the oxidation process is not fully explored, particularly regarding the transformation of minerals and the behavior of metals. In this paper, we conducted detailed mineralogical and geochemical analyses on a series of samples with varying degrees of oxidation, collected from the Wocan-1 hydrothermal field, Carlsberg Ridge, Northwest Indian Ocean. The principal purpose is to illuminate the formation and transformation of Fe (oxyhydr)oxides, and further to reveal the migration and redistribution of key metals throughout the oxidation process. We identified four types of Fe(−Si) (oxyhydr)oxides with two distinct formation mechanisms. Three Fe (oxyhydr)oxides are the direct oxidation products of pyrite and marcasite, while Fe-Si (oxyhydr)oxide precipitates from low-temperature hydrothermal fluids. Thin Fe (oxyhydr)oxide forms as the secondary product of euhedral pyrite at the early stage of oxidation. Pseudomorphic Fe (oxyhydr)oxide with low Fe contents, occurs as the replacement of euhedral marcasite. Filamentous Fe (oxyhydr)oxide, enriched in trace metals, is attributed to the uniform oxidation of subhedral pyrite-marcasite intergrowth. Moreover, major and trace elements occur multiple migrations and redistributions among primary sulfides, secondary products, and seawater. Notably, Fe (oxyhydr)oxides, through the sequestration mechanism, not only retain Cu and Zn released by the oxidation of primary sulfide minerals, but also scavenge Cu from seawater. However, the dissolution of Pb, As, Mo, and Co exceeds the amount retained during the oxidation, indicating that the potential release of toxic metals into the environment could pose a threat to the local ecosystem. These new insights can provide an initial foundation for the effect of submarine oxidation on economic values of sulfides and ecological environments of deep sea.

Prediction model for equivalent exposure time in indoor dry-wet cycling tests for concrete in marine tidal zones

Chloride ion erosion poses a major threat to the durability of concrete structures in coastal environments, particularly in tidal zones with periodic seawater exposure. This study developed a predictive model based on Fick's second law, utilizing data from over 20 coastal structures across six countries. The model, grounded in the principle of equivalent free chloride ion concentration at a certain depth after a given exposure time, estimates the number of dry-wet cycles required in accelerated laboratory testing to simulate real-world conditions. It has been validated using data from actual marine structures. Key environmental factors such as temperature and humidity, along with regional climate differences, are incorporated to predict the relative deterioration rates of concrete in various marine environments. Additionally, an accelerated indoor dry-wet cycle test was designed based on the theory of environmental similarity, tracking the performance evolution of concrete. The model was verified through experiments, showing that 30 indoor dry-wet cycles correspond to 79 years of exposure in a coastal environment. The physical property changes observed in the accelerated tests further confirmed the model’s reliability and accuracy. This research provides critical insights into the impact of environmental factors on concrete degradation and offers a scientific basis for the application of accelerated laboratory testing.

Atlas of Pacific sand lance (Ammodytes personatus) benthic habitat – application of multibeam acoustics and directed sampling to identify viable subtidal substrates

Defining and delineating species distribution and critical habitat is critical to informed management and conservation. This process is complicated in marine environments, where detection of marine taxa and characterization of marine habitat is more difficult. Small pelagic fishes and forage fishes are particularly challenging, though insights may be more accessible in species highly dependent on particular habitat. Pacific sand lance (Ammodytes personatus) is a common and ecologically-important pelagic fish that relies on specific benthic sediments for rest and refuge from predation. We applied multibeam echosounder (MBES) bathymetric data to develop high-definition benthic habitat maps and implemented multiyear sampling to assess potential habitat for sand lance via in situ sampling of sediments. We also applied acoustic Doppler current profilers (ADCP) data and tidally-driven volume-based ocean models to measure current strength and to visualize currents. We leveraged this data to further define and describe habitat for this important forage species. Sediment transport processes were mapped and areas of dispersal, embedment, and accumulation were evaluated. Dynamic bedform habitats, banner banks and glacial banks were identified as potential habitat and sampled for fish presence, density and sediment composition. In the central Salish Sea, approximately 25% of benthic substrates represent potential sand lance habitat. Sand lance prevalence and density correlated with substrate type and sediment coarseness. Densities were highest in areas of coarse grain sediments and presence was limited by fine particulates, such as silt and mud. Tidal currents appear important. Presence and densities of sand lance were correlated with current velocity and distance from current flow path. Nearly all viable sites were located on the immediate margins of high flow (< 0.16 km from tidal currents with max speed of 1.72-2.58 m/s). While both flood and ebb were important, processes related to flood were dominant. Viable habitat was not constrained by depth. These results inform a developing atlas for sand lance in the central Salish Sea, provide new insights to subtidal sand lance habitat, characterize conditions that create and maintain subtidal benthic habitat, and provide a template for mapping habitat for this species in the coastal Pacific Ocean.

A comprehensive epidemiological approach documenting an outbreak of H5N1 highly pathogenic avian influenza virus clade 2.3.4.4b among gulls, terns, and harbor seals in the Northeastern Pacific

Highly pathogenic avian influenza viruses (HPAIV) H5N1 clade 2.3.4.4b continue to have unprecedented global impacts on wild birds and mammals, with especially significant mortality observed in colonial surface-nesting seabirds and in some marine mammal species. In July of 2023 H5N1 HPAIV 2.3.4.4b was detected in Caspian terns nesting on Rat Island, Washington USA. An estimated 1,800–1,900 adult terns populated the breeding colony, based on aerial photographs taken at the start of the outbreak. On a near-weekly basis throughout July and August, we counted and removed carcasses, euthanized moribund birds, and collected swab and tissue samples for diagnostic testing and next-generation sequencing. We directly counted 1,101 dead Caspian tern adults and 520 dead chicks, indicating a minimum 56% loss of the adult colony population and potential impacts to reproductive success. Combining the observed mortality on Rat Island with HPAI-related Caspian tern deaths recorded elsewhere in Washington and Oregon, we estimate that 10–14% of the Pacific Flyway population was lost in the summer of 2023. Comparatively few adult Glaucous-winged gulls (hybrids) nesting on Rat Island died (~3% of the local population), although gull chick mortality was high. Sixteen harbor seals in the immediate or nearby area stranded during the outbreak, and H5N1 HPAIV was detected in brain and/or lung tissue of five seals. These cases are the first known detections of HPAIV in a marine mammal on the Pacific coast of North America. Phylogenetic analyses support the occurrence of at least three independent avian-mammalian virus spillover events (tern or gull to harbor seal). Whole genome sequencing indicated that H5N1 HPAIV may have been introduced to Washington from Caspian terns in Oregon. Ongoing monitoring and surveillance for H5N1 HPAIV in the marine environment is necessary to understand the epidemiology of this virus, assess conservation impacts to susceptible species, and provide support for data-driven management and response actions.

Navigating the Waves of Change—Assessing the Evolving Landscape of China’s Revised Marine Environmental Protection Law

Since its inception in 1982, the Marine Environmental Protection Law (MEPL) has undergone several revisions in 1999, 2013, 2016, and 2017, capping in the inclusive overhaul of 2023. These successive revisions have gradually shaped a robust legal system encompassing the Constitution as the foundational basis, the MEPL as the core regulatory instrument, and several corresponding laws safeguarding specific marine elements as the driving force. The newly revised MEPL 2023, compared to its previous iterations, introduces significant improvements that are largely reflected in strengthening the protection of marine biodiversity conservation, advancing the prevention and control of ship-source marine pollution, optimising the supervision of the marine environment, enhancing the prevention and control of land-based marine pollution, and imposing stricter liabilities. This paper examines how the new MEPL 2023 improves China’s marine environmental protection, and incorporates international best practices within the legal framework. Additionally, the research explores potential areas for further development that provide some implications for policymakers and should have been considered.

Insights into the role of the Cr and rare element in improving the corrosion resistance of HRB400 rebars in simulated SO2-polluted marine environment

The present work aims to offer insights into the role of Cr and rare element (RE) in improving the corrosion resistance of HRB400 rebar in simulated concrete pore solution (SCPS) containing NaCl and NaHSO3. Electrochemical tests reveal that the increased SO2 concentration reduces the pitting potential and charge transfer resistance. However, the addition of Cr/RE significantly lowers the corrosion current density of HRB400, as confirmed by the corrosion morphology observed after immersion tests. Quantitative analysis of corrosion pits shows that SO2-induced corrosion tends to develop longitudinally, a tendency mitigated by the Cr/RE alloyed rebar. X-ray photoelectron spectroscopy (XPS) results confirm the presence of Cr and RE oxides in the oxide film and demonstrate that SO2 affects the Fe(II)/Fe(III) ratio. Cr and RE doping not only refines the microstructure and modifies inclusions but also enhances the protective properties of the oxide film on the rebar. Therefore, the combination of Cr and RE improves the durability of rebars in SO2-polluted marine environments.

Evidence of polybrominated diphenyl ethers (PBDEs) and alternative halogenated flame retardants (AHFRs) in wild fish species from the remote tropical marine environment, South China Sea

Polybrominated diphenyl ethers (PBDEs) and their alternatives (e.g., dechlorane plus (DPs) and decabromodiphenyl ethane (DBDPE)) are ubiquitous in various environmental media. However, limited data is available on these chemicals in edible fish species from the wide-open South China Sea (SCS). In the present study, ten legacy PBDEs and three substitutions (DBDPE and two DPs) were analyzed in 16 wild fish species sampled from the open SCS to investigate their spatial and species-specific variations. The results showed that the total concentrations of PBDEs, DBDPE, and DPs in fish samples were in the range of 1.69 to 47.6, not detected (nd) to 21.0, and nd to 3.80 ng/g lipid weight (lw), respectively. BDEs 47, 209 and 100 were the dominant target PBDE congeners, representing 49.2%, 17.2% and 9.93% of the total PBDE concentrations, respectively. Higher concentrations of PBDEs, DBDPE, and DPs were found in fish species from the Wanshan Archipelago compared to those from the Mischief Reef and the Yongxing Island, suggesting the significant influence of anthropogenic activities. Species-specific differences in levels of PBDEs were observed, with the order of bathydemersal > demersal > pelagic ≈ reef-associated > benthopelagic species. The average fanti value of all fish samples was 0.68, suggesting commercial DP products as a contamination source. The levels of PBDEs, DPs, and DBDPE in fish samples were relatively low compared with those from other locations around the globe. Finally, the health risks concerning the ingestion of BDEs 47, 99, 153 and 209 via fish consumption collected from the SCS are negligible.

Ultrahigh tribocorrosion resistance of hydrogenated amorphous carbon coating via trace gradient W incorporation

In this work, we manipulated the trace gradient W incorporation combined with a increment top-layer thickness for the hydrogenated amorphous carbon (a-C:H) coating on thermally sprayed WC-based cermet. The tribocorrosion resistance of the modified a-C:H coating was investigated in terms of structural evolution during friction under 3.5wt.% NaCl solution. Regardless of introduction of gradient W doping, although the a-C:H coating maintained the sp2/sp3 atomic bond structure, the stress reduction and plasticity increase were obtained for coatings. Moreover, the stable open-circuit potential revealed that the tribocorrosion resistance of modified coating was significantly improved, as identified by the quite low wear rate and coefficient of friction at 1.46×10-8 mm3/N·m and COF of 0.067, respectively. Different with the traditional failure of worn-out and pitting corrosion of a-C:H coating in chloride solution, the designed robust interfaces and the functional top-layer enabled the coating to withstand longest sliding distance over 2100m at heavy contacting pressure of 1.67GPa. These observations offer the promising strategy to fabricate advanced carbon-based coatings with required extremely strong wear resistance and anticorrosion capability for mechanical components used in harsh marine environment.

Measurement of ocean currents by seafloor distributed optical-fiber acoustic sensing.

Ocean current measurements play a crucial role in aiding our understanding of ocean dynamics and circulation systems. Traditional methods, such as drifters and ocean buoys, are sparsely distributed and of limited effectiveness due to the nature of the marine environment and high operating expenses. Distributed acoustic sensing (DAS) is an emerging technology using submarine optical-fiber (OF) cables as dense seismo-acoustic arrays, offering a new perspective for ocean observations. Here, in situ observations of ocean surface gravity waves (OSGWs) and ocean currents by DAS were made along a pre-existing 33.6 km seafloor OF cable. The average current velocity and water depth along the cable were determined from observed OSGW-induced seafloor noise (0.05-0.2 Hz) using ambient-noise interferometry and frequency-domain beamforming. Variations in current velocity were derived at high spatiotemporal resolution using the frequency-domain waveform-stretching method. The inverted current velocity was verified by nearby ocean buoy observations and forecasting results. The observations demonstrate the effectiveness of DAS-instrumented OF cables in monitoring ocean currents.

Influence of Spawning and Nursery Ground Environmental Changes on Walleye Pollock Catches Along the Eastern Coasts of Korea and Japan After the Late-1980s Climate Regime Shift

The eastern coasts of Korea (ECK) and Japan (ECJ) are located at the southernmost limit of walleye pollock distribution in the Northwest Pacific. Following the climate regime shift (CRS) in the late 1980s, pollock catches in these regions have declined sharply, with different trends emerging. This study examined the relationship between environmental factors, such as sea surface temperature (SST) and habitat suitability, and changes in pollock catches from the late 1980s to 2022. From the late 1980s to the late 1990s, El Niño and positive Pacific decadal oscillation (PDO) phases dominated, increasing SST in the ECK and ECJ habitats and rapidly decreasing catches. Although spawning grounds (SGs) have maintained high habitat suitability, nursery ground (NG) suitability has declined. From the late 1990s to 2022, La Niña and negative PDO phases prevailed, with SST continuing to rise along the ECK, further reducing catches. SG suitability remained high, but NG suitability declined. Along the ECJ, SST decreased after the late-1990s CRS, stabilizing catches. After the mid-2010s, the SST increased along the ECJ, reducing pollock catches, although SG suitability remained high. This study elucidates SST changes during early life stages and their effects on pollock catch, habitat, and resources in future marine environments.

On the printability of high-density polyethylene (HDPE) reinforced with long glass and short carbon fibres

Purpose This research is about the possibilities of using high-density polyethylene (HDPE)-based composites consisting of long glass and short carbon fibres because HDPE is one of the more preferred thermoplastics day by day due to its sustainability, cost-effectiveness and availability in the relevant markets. HDPE has become an increasingly preferred material in the marine industry in recent years due to its high resistance to marine environmental conditions (high resistance to UV, surface-fouling marine organisms and corrosive effects of salty and low-pH water). In the highly competitive boat building industry, additive manufacturing offers new opportunities such as rapid prototyping and design freedom. This study aims to investigate the possibilities of using a material suitable for the marine environment and an additive manufacturing (AM) method offering new possibilities, especially for small craft with complex forms. Design/methodology/approach A total of six new HDPE-based composites consisting of long glass and short carbon fibres at 10, 15 and 20% by weight have been proposed for the first time in this study for the use in boat building industry, proposing the application of these new composite materials with AM method, which the industry is not yet fully adopted, is also an innovative aspect of the study. The performances of the materials in AM’s material extrusion (MEX) method were evaluated using the results obtained from mechanical (tensile, compression, shear and impact) and thermal (melt flow index [MFI], thermogravimetric analysis [TGA] and thermomechanical analysis [TMA]) tests. In addition, the structure of the composites was examined with scanning electron microscopy and micro computed tomography visually, and the rheological properties of the composites were also determined by the related tests. As an industrial case study, a ship propeller was manufactured from the composites produced with CF15, which was thought to give the best performance in marine use, and this propeller was tested under water flow. Findings It is evaluated that the composites proposed in this study can be used in marine industry in line with the analyses and test results. The performance of the propeller produced as a case application also confirms this view. The printability of HDPE-based composites, reinforced by both glass and carbon fibre, is much better than that of pure HDPE, and the composites are suitable for use AM’s MEX method in boat building industry. As the fibre contents in the proposed composites increase, the strength values increase and the impact resistance and hardness decrease. The CF15 composite, which meets each of those mechanical and physical values at an average level, is a recommended option for marine applications. Originality/value This study has two basic originalities: (1) On the basis of HDPE, which is widely used in the marine industry, to produce composites that will overcome the deficiencies of this material in practice and to present them to relevant industry by improving their properties; (2) at the same time, to discuss for the first time the use of new HDPE-based materials in AM, whose printability has also been improved through composite, to help dissemination of AM technologies in marine industry in general and in the boat building industry in particular.

Comparative Genomics Reveal Distinct Environment Preference and Functional Adaptation Among Lineages of Gemmatimonadota

Bacteria in the phylum Gemmatimonadota are globally distributed and abundant in microbial communities of various environments, playing an important role in driving biogeochemical cycling on Earth. Although high diversities in taxonomic composition and metabolic capabilities have been reported, little is known about the environmental preferences and associated functional features that facilitate adaptation among different Gemmatimonadota lineages. This study systematically analyzed the relationships between the environments, taxonomy, and functions of Gemmatimonadota lineages, by using a comparative genomics approach based on 1356 Gemmatimonadota genomes (213 high-quality and non-redundant genomes) available in a public database (NCBI). The taxonomic analysis showed that the 99.5% of the genomes belong to the class Gemmatimonadetes, and the rest of the genomes belong to the class Glassbacteria. Functional profiling revealed clear environmental preference among different lineages of Gemmatimonadota, and a marine group and two non-marine groups were identified and tested to be significantly different in functional composition. Further annotation and statistical comparison revealed a large number of functional genes (e.g., amiE, coxS, yfbK) that were significantly enriched in genomes from the marine group, supporting enhanced capabilities in energy acquisition, genetic information regulation (e.g., DNA repair), electrolyte homeostasis, and growth rate control. These genomic features are important for their survival in the marine environment, which is oligotrophic, variable, and with high salinity. The findings enhanced our understanding of the metabolic processes and environmental adaptation of Gemmatimonadota, and further advanced the understanding of the interactions of microorganisms and their habitats.

The Environmental Niche of the Light Purse Seine Fleet in the Northwest Pacific Ocean Based on Automatic Identification System Data

Ecosystem-based fisheries management requires high-precision fisheries information to provide relevant data for natural resource management, assessment, and marine spatial planning. This study utilizes Automatic Identification System (AIS) data from light purse seine vessels from the Chinese mainland that were collected from May to November between 2020 and 2022, along with the corresponding environmental data. By applying boosted regression trees (BRTs) and generalized additive models (GAMs), this study establishes nonlinear relationships between fishing intensity and predictor variables and explores the ecological and environmental drivers behind the spatial distribution of light purse seine vessels from the Chinese mainland in the Northwest Pacific. This research identifies the key influencing factors and reveals significant seasonal preferences for different marine environments in various months, with chlorophyll-a being the primary influencing factor. The predicted fishing effort closely resembles observed data, providing valuable information to support fisheries resource management and planning.

Benthic foraminifera as bio-indicators of natural and anthropogenic conditions in Roscoff Aber Bay (Brittany, France).

Living benthic foraminifera, known as environmental bio-indicators of both natural and anthropogenic conditions in marine environments, were investigated in the coastal environment of Roscoff Aber Bay (Brittany, France). Eight sampling sites subject to natural variations (freshwater inputs, tides) and/or anthropogenic impacts (pollution, eutrophication) were studied over four seasons in 2021-2022 (November, February, May, August). We sought to understand the spatial distribution of foraminiferal populations within and between sampling sites over the different seasons and to identify sensitive species and those tolerant to anthropogenic impacts. To this end, sedimentary and biogeochemical characteristics of the sediments were examined by measuring grain size, temperature, oxygen, salinity, pH, environmental pigment concentration (chl a and phaeopigments), total organic carbon (TOC), isotopic ratios of carbon (δ13C), nitrogen (δ15N) and sulfide (δ34S), and chl a fluorescence. Considering these parameters as potential driving factors, four environments were distinguished among the sampling sites: open water, terrestrial, oligotrophic and eutrophic. These showed an increasing gradient of organic supply as well as very different microbial activities, highlighted by carbon and sulfide isotopic ratios. Foraminiferal population study revealed the dominant species characterising these main environments. The lowest abundance but highest diversity of foraminifera was found in the harbour site, associated with the dominance of Haynesina germanica, suggesting this species is tolerant to eutrophic environments and anthropogenic impacts. Open water was dominated by Ammonia beccarii and Elphidium crispum, while Quinqueloculina seminula was the most abundant species in the site with the greatest terrestrial influence. Interestingly, the observed organic enrichment of the harbour due to anthropogenic activities (fisheries, waste deposits, etc.) does not seem to significantly affect foraminiferal diversity. Overall, the benthic foraminiferal species in Roscoff Aber Bay appear to be an excellent proxy for marine environmental conditions under various natural and anthropogenic influences.

Genetic analyses of Anisakis pegreffii (Nematoda: Anisakidae) from the East Asian finless porpoise Neophocaena asiaeorientalis sunameri (Cetacea: Phocoenidae) in Korean waters

The East Asian finless porpoise, Neophocaena asiaeorientalis sunameri, is an endangered species that inhabits the coastal marine environments of East Asia. In the present study, we investigated the overall infection status of anisakid nematodes in East Asian finless porpoises from three sea sectors off the Korean Peninsula. The genetic diversity and population genetic structure of the identified nematode species were evaluated. The prevalence of all stages of anisakid nematodes collected from the stomach was 57.55% (61 among the 106 porpoises examined), and 16 of the hosts were found to have adult worms. The mean number of infected adults was 211 (± 419.54, 5–1455 per host). Only one species of anisakids, Anisakis pegreffii, was identified from randomly selected worms by molecular approaches. Analysis of the mitochondrial (mt) cox2 partial gene in 50 newly generated sequences of A. pegreffii revealed 24 haplotypes, including 14 new haplotypes. We observed below-average levels of nucleotide diversity and haplotype diversity compared to other seas around the world. The mtDNA cox2 haplotypes of the species in the three Korean sea areas showed no genetic structure, suggesting well-connected gene flow within these areas. This study represents the first record of a definitive host of A. pegreffii in Korean waters, providing important information regarding anisakids genetic diversity in the cetacean species inhabiting limited regions.

Unveiling Preliminary Study of the Holocene Sedimentary Environments and Biofacies in Western of Al-Hammar Marsh, Southern Part of Iraq

Biofacies and sedimentary environment analyses were conducted across three sites west of Al-Hammar Marsh. Excavations were undertaken at different depths for a comprehensive study. The initial site was probed at 9 m depth, followed by the second site at 5 m, and the third site at 9 m. Subsequent examination of these samples aimed to unveil insights into grain size, fossil contents, and their respective ecological settings. The grain size analysis revealed three distinct sediment types: silt, sandy silt, and muddy sand. Additionally, fossil assemblages hinted at three primary biofacies. The first facies represented a fresh marsh-fluvial environment identified across all three sites at different depths. Specifically, this biofacies manifested from the surface to about 200 cm in site one, 50-150 cm in site two, and 50-250 cm in site three. The second biofacies indicated a shallow marine environment at depths ranging from 250 to 550 cm in site one, 200-300 cm in site two, and 300-650 cm in site three. Lastly, the third biofacies denoted a lagoon or tidal flat environment observed at 600-900 cm depths in site one, 300-500 cm in site two, and 700-900 cm in site three. Notably, the third biofacies in site three exhibited signs of influence from alkaline freshwater, particularly in the third location at a depth of 700-800 cm. This influence was attributed to a mixture of marine and freshwater species, including; Quinqueloculina candeiana, Quinqueloculina angulta, Cubicula fluminalis, and Melanoides tuberculate. Abundant occurrences of these species were noted in the silty clay lithology of this layer.

Mendekatkan Rumput Laut ke Masyarakat: Program Sosialisasi dan Pendidikan untuk Peningkatan Ekonomi Desa Ulidang, Majene

Ulidang Village, part of the Tameroddo Sub-district, has excellent potential in the fisheries and marine sector, although it still faces significant economic challenges. The potential of seaweed as a marine resource that has yet to be fully utilized is the focus of this activity. The main objective is to provide comprehensive counseling on the potential of seaweed, including cultivation methods, nutritional content, and business management aspects. This activity's implementation stage starts with planning, program implementation, and evaluation. The research results showed that socialization efforts, including explanations of seaweed potential, business management, and farming profit simulations, have provided the community with a deep understanding. The pretest and post-test evaluations illustrated the improvement in participants' understanding after the socialization activities. Thus, the development of seaweed farming in Ulidang Village can be a solution to improve community welfare, create jobs, and care for the marine environment. Strategic steps include strong partnerships, community empowerment, and adoption of innovations to ensure the sustainability of seaweed farming at the local and national levels.

Comparative Study on NDT Techniques for Evaluation of Concrete Quality Exposed to Marine Environment

Concrete, the primary material used in quay walls, is directly exposed to saline environments. Coping concrete, particularly in areas where periodic berthing and loading/unloading occur, is prone to rapid quality deterioration. Current facility safety and maintenance guidelines assess concrete durability at specific points through sampling, which are intended to represent the entire inspection unit. This paper explores quality management strategies from an areal perspective by applying various non-destructive scanning methods to extensive areas of coping concrete. Ultrasonic array imaging and ground-penetrating radar scanning images revealed significant quality degradation in berthing operation areas, whereas sampling-based ultrasonic pulse velocity and rebound hardness values were less effective in detecting this degradation.