Manual Metal Arc Stainless Steel Research Articles

TERT-independent telomere elongation and shelterin dysregulation after pulmonary exposure to stainless-steel welding fume in-vivo

Telomeres are inert DNA sequences (TTAGGG) at the end of chromosomes that protect genetic information and maintain DNA integrity. Emerging evidence has demonstrated that telomere alteration can be closely related to occupational exposure and the development of various disease conditions, including cancer. However, the functions and underlying molecular mechanisms of telomere alteration and shelterin dysregulation after welding fume exposures have not been broadly defined. In this study, we analyzed telomere length and shelterin complex proteins in peripheral blood mononuclear cells (PBMCs) and in lung tissue recovered from male Sprague-Dawley rats following exposure by intratracheal instillation (ITI) to 2 mg/rat of manual metal arc-stainless steel (MMA-SS) welding fume particulate or saline (vehicle control). PBMCs and lung tissue were harvested at 30 d after instillation. Our study identified telomere elongation and shelterin dysregulation in PBMCs and lung tissue after welding fume exposure. Mechanistically, telomere elongation was independent of telomerase reverse transcriptase (TERT) activation. Collectively, our findings demonstrated that welding fume-induced telomere elongation was (a) TERT-independent and (b) associated with shelterin complex dysregulation. It is possible that an alteration of telomere length and its regulatory proteins may be utilized as predictive biomarkers for various disease conditions after welding fume exposure. This needs further investigation.

Evaluation of the molecular mechanisms associated with cytotoxicity and inflammation after pulmonary exposure to different metal-rich welding particles

Welding generates a complex aerosol of incidental nanoparticles and cytotoxic metals, such as chromium (Cr), manganese (Mn), nickel (Ni), and iron (Fe). The goal was to use both in vivo and in vitro methodologies to determine the mechanisms by which different welding fumes may damage the lungs. Sprague-Dawley rats were treated by intratracheal instillation (ITI) with 2.0 mg of gas metal arc-mild steel (GMA-MS) or manual metal arc-stainless steel (MMA-SS) fumes or saline (vehicle control). At 1, 3, and 10 days, bronchoalveolar lavage (BAL) was performed to measure lung toxicity. To assess molecular mechanisms of cytotoxicity, RAW264.7 cells were exposed to both welding fumes for 24 h (0–100 μg/ml). Fume composition was different: MMA-SS (41% Fe, 29% Cr, 17% Mn, 3% Ni) versus GMA-MS (85% Fe, 14% Mn). BAL indicators of lung injury and inflammation were increased by MMA-SS at all time points and by GMA-MS at 3 and 10 days after exposure. RAW264.7 cells exposed to MMA-SS had elevated generation of reactive oxygen species (ROS), protein-HNE (P-HNE) adduct formation, activation of ERK1/2, and expression of cyclooxygenase-2 (COX-2) compared to GMA-MS and control. Increased generation of ROS due to MMA-SS exposure was confirmed by increased expression of Nrf2 and heme oxygenase-1 (HO-1). Results of in vitro studies provide evidence that stainless steel welding fume mediate inflammatory responses via activation of ROS/P-HNE/ERK1/2/Nrf2 signaling pathways. These findings were corroborated by elevated expression of COX-2, Nrf2, and HO-1 in homogenized lung tissue collected 1 day after in vivo exposure.

Altered ion transport in normal human bronchial epithelial cells following exposure to chemically distinct metal welding fume particles

Welding fume inhalation causes pulmonary toxicity, including susceptibility to infection. We hypothesized that airway epithelial ion transport is a target of fume toxicity, and investigated the effects of fume particulates from manual metal arc-stainless steel (MMA-SS) and gas metal arc-mild steel (GMA-MS) on ion transport in normal human bronchial epithelium (NHBE) cultured in air-interface. MMA-SS particles, more soluble than GMA-MS particles, contain Cr, Ni, Fe and Mn; GMA-MS particles contain Fe and Mn. MMA-SS or GMA-MS particles (0.0167–166.7μg/cm2) were applied apically to NHBEs. After 18h transepithelial potential difference (Vt), resistance (Rt), and short circuit current (Isc) were measured. Particle effects on Na+ and Cl¯ channels and the Na+,K+,2Cl¯-cotransporter were evaluated using amiloride (apical), 5-nitro-2-[(3-phenylpropyl)amino]benzoic acid (NPPB, apical), and bumetanide (basolateral), respectively. MMA-SS (0.0167–16.7μg/cm2) increased basal Vt. Only 16.7μg/cm2 GMA-MS increased basal Vt significantly. MMA-SS or GMA-MS exposure potentiated Isc responses (decreases) to amiloride and bumetanide, while not affecting those to NPPB, GMA-MS to a lesser degree than MMA-SS. Variable effects on Rt were observed in response to amiloride, and bumetanide. Generally, MMA-SS was more potent in altering responses to amiloride and bumetanide than GMA-MS. Hyperpolarization occurred in the absence of LDH release, but decreases in Vt, Rt, and Isc at higher fume particulate doses accompanied LDH release, to a greater extent for MMA-SS. Thus, Na+ transport and Na+,K+,2Cl¯-cotransport are affected by fume exposure; MMA-MS is more potent than GMA-MS. Enhanced Na+ absorption and decreased airway surface liquid could compromise defenses against infection.

Oxidative stress, DNA methylation, and telomere length changes in peripheral blood mononuclear cells after pulmonary exposure to metal-rich welding nanoparticles

Welding fume is a complex mixture of different potentially cytotoxic and genotoxic metals, such as chromium (Cr), manganese (Mn), nickel (Ni), and iron (Fe). Documented health effects have been observed in workers exposed to welding fume. The objective of the study was to use an animal model to identify potential biomarkers of epigenetic changes (e.g., changes in telomere length, DNA methylation) in isolated peripheral blood mononuclear cells (PBMCs) after exposure to different welding fumes. Male Sprague-Dawley rats were exposed by intratracheal instillation (ITI) of 2.0mg/rat of gas metal arc-mild steel (GMA-MS) or manual metal arc-stainless steel (MMA-SS) welding fume. Vehicle controls received sterile saline by ITI. At 4h, 14h, 1d, 3d, 10d, and 30d, bronchoalveolar lavage (BAL) was performed to assess lung inflammation. Whole blood was collected, and PBMCs were isolated. Dihydroethidium (DHE) fluorescence and 4-hydroxylnonenal protein adduct (P-HNE) formation were measured in PBMCs to assess reactive oxygen species production. DNA alterations in PBMCs were determined by evaluating changes in DNA methylation and telomere length. Metal composition of the two fumes was different: MMA-SS (41% Fe, 29% Cr, 17% Mn, 3% Ni) versus GMA-MS (85% Fe, 14% Mn). The more soluble and chemically complex MMA-SS sample induced a more persistent and greater inflammatory response compared to the other groups. Also, oxidative stress markers increased at 24h in the PBMCs recovered from the MMA-SS group compared to other group. No significant differences were observed when comparing DNA methylation between the welding fume and control groups at any of the time points, whereas the MMA-SS sample significantly increased telomere length at 1 and 30 d after a single exposure compared to the other groups. These findings suggest that genotoxic (e.g., Cr, Ni) and soluble (e.g, Cr, Mn) metals in MMA-SS fume, that are different from the GMA-MS fume, may enhance lung toxicity, as well as induce markers of oxidative stress and increase telomere length in PBMCs. Importantly, the measurement of telomere length in cells isolated from peripheral blood may serve as a potential biomarker of response in the assessment of toxicity associated with welding fumes.

Home cage locomotor changes in non-human primates after prolonged welding-fume exposure

To define the relationship between the brain concentration of manganese and neurological signs, such as locomotion, after prolonged welding-fume exposure, cynomolgus monkeys were acclimated for 1 month and then divided into three concentration groups: unexposed, low concentration (31 mg/m3 total suspended particulate (TSP), 0.9 mg/m3 of Mn), and high concentration (62 mg/m3 TSP, 1.95 mg/m3 of Mn) of TSP. The monkeys were exposed to manual metal-arc stainless steel (MMA-SS) welding fumes for 2 h per day over 8 months in an inhalation chamber system equipped with an automatic fume generator. The home cage locomotor activity and patterns were determined using a camera system over 2–4 consecutive days. After 25 and 32 weeks of exposure, the home cage locomotor activity of the high-concentration primates was found to be 5–6 times higher than that of the unexposed primates, and this increased locomotor activity was maintained for 7 weeks after ceasing the welding-fume exposure, eventually subsiding to three times higher after 13 weeks of recovery. Therefore, the present results, along with our previous observations of a high magnetic resonance imaging (MRI) T1 signal in the globus pallidus and increased blood Mn concentration, indicate that prolonged welding-fume exposure can cause neurobehavioral changes in cynomolgus monkeys.

Increased oxidative stress with reduced responsiveness of circulating leukocytes following pulmonary metal‐rich particulate matter exposure

Pulmonary exposure to metal‐rich particulate matter (PM) generated from welding causes localized immunosuppression. The aim of this study was to evaluate the molecular changes and responsiveness of circulating leukocytes following exposure. Rats were exposed to manual metal arc stainless steel welding fume (MMAW‐SS) at 2 mg/rat by intratracheal instillation and sacrificed at 4 and 24 hr post‐exposure. Collected whole blood was then challenged with and without LPS for 24 hr. After incubation, supernatants were collected for protein analysis and the cellular fraction was collected for global gene expression changes. Also, mononuclear cells were isolated and analyzed for oxidative stress by flow cytometry and confocal microscopy. Ex vivo leukocyte stimulation with LPS showed reduced production of CCL4, CXCL2, CXCL10 and TNF‐alpha protein in MMAW‐SS treated rats. Interestingly, cellular gene expression changes from MMAW‐SS and PBS rats were similar indicating effects were not related to transcription. Since oxidative stress can affect translation, isolated mononuclear cells were tested and showed increased basal levels of oxidative stress. These results showed increased oxidative stress with a reduced responsiveness of circulating leukocytes providing mechanistic insight into epidemiological and experimental evidence illustrating immunosuppression following a metal‐rich PM exposure.

Relationship between pulmonary and systemic markers of exposure to multiple types of welding particulate matter

Welding results in a unique and complex occupational exposure. Recent epidemiological studies have shown an increased risk of cardiovascular disease following welding fume exposure. In this study, we compared the induction of pulmonary and systemic inflammation following exposure to multiple types of welding fumes. Mice were exposed to 340 μg of manual metal arc stainless steel (MMA-SS), gas metal arc-SS (GMA-SS) or GMA-mild steel (GMA-MS) by pharyngeal aspiration. Mice were sacrificed at 4 and 24 h post-exposure to evaluate various parameters of pulmonary and systemic inflammation. Alterations in pulmonary gene expression by a custom designed TaqMan array showed minimal differences between the fumes at 4 h. Conversely at 24 h, gene expression changes were further increased by SS but not GMA-MS exposure. These findings were associated with the surrogate marker of systemic inflammation, liver acute phase gene induction. Interestingly, stress response genes in cardiovascular tissues were only increased following MMA-SS exposure. These effects were related to the initial level of pulmonary cytotoxicity, as measured by lactate dehydrogenase activity, which was greatest following MMA-SS exposure. In conclusion, varying types of welding fumes elicit quantitatively different systemic inflammatory and/or stress responses.

Lung Tumor Production and Tissue Metal Distribution After Exposure to Manual Metal ARC–Stainless Steel Welding Fume in A/J and C57BL/6J Mice

Stainless steel welding produces fumes that contain carcinogenic metals. Therefore, welders may be at risk for the development of lung cancer, but animal data are inadequate in this regard. Our main objective was to examine lung tumor production and histopathological alterations in lung-tumor-susceptible (A/J) and -resistant C57BL/6J (B6) mice exposed to manual metal arc-stainless steel (MMA-SS) welding fume. Male mice were exposed to vehicle or MMA-SS welding fume (20 mg/kg) by pharyngeal aspiration once per month for 4 mo. At 78 wk postexposure, gross tumor counts and histopathological changes were assessed and metal analysis was done on extrapulmonary tissue (aorta, heart, kidney, and liver). At 78 wk postexposure, gross lung tumor multiplicity and incidence were unremarkable in mice exposed to MMA-SS welding fume. Histopathology revealed that only the exposed A/J mice contained minimal amounts of MMA-SS welding fume in the lung and statistically increased lymphoid infiltrates and alveolar macrophages. A significant increase in tumor multiplicity in the A/J strain was observed at 78 wk. Metal analysis of extrapulmonary tissue showed that only the MMA-SS-exposed A/J mice had elevated levels of Cr, Cu, Mn, and Zn in kidney and Cr in liver. In conclusion, this study further supports that MMA-SS welding fume does not produce a significant tumorigenic response in an animal model, but may induce a chronic lung immune response. In addition, long-term extrapulmonary tissue alterations in metals in the susceptible A/J mouse suggest that the adverse effects of this fume might be cumulative.

Recurrent Exposure to Welding Fumes Induces Insufficient Recovery from Inflammation

Previous studies on welding-fume-induced lung fibrosis have indicated that recovery is possible when the degree of exposure is short-term and moderate. However, this study investigated the recovery after recurrent exposure to welding fumes, as welders are invariably re-exposed to welding fumes after recovering from radiographic pneumoconiosis. Thus, to investigate the disease and recovery processes of welding-fume-induced pneumoconiosis in the case of recurrent welding-fume exposure, rats were exposed to manual metal arc–stainless steel (MMA-SS) welding fumes with a total suspended particulate (TSP) concentration of 51.4 ± 2.8 mg/m3 (low dose) or 84.6 ± 2.9 mg/m3 (high dose) for 2 h/day in an inhalation chamber for 1 mo and then allowed to recover from the inflammation for 1 mo. Thereafter, the rats were exposed again to MMA-SS with a TSP concentration of 44.1 ± 8.8 mg/m3 (low dose) or 80.1 ± 9.8 mg/m3 (high dose) for another 30 d and then allowed to recover from the inflammation for 1 mo. The recovery from the first exposure was then compared with that from the second exposure. The first and second exposures to MMA-SS welding fumes were found to produce significant increases in the lung weights and inflammatory parameters, including total cell numbers, alveolar macrophages (AMs), polymorphonuclear cells (PMNs), lymphocytes, and lactate dehydrogenase (LDH) in the bronchoalveolar lavage fluid (BALF) when compared with the unexposed controls. Following the first and second recovery, a significant reduction in inflammatory parameters of BALF was observed between the exposure and recovery groups. Histopathological observations showed foamy or pigmented macrophage accumulation, cellular debris, or pigment from burst macrophages after the first or second exposure. Following the first or second recovery, cellular debris or pigment from burst macrophages was cleared away from the lungs and accumulation of foamy or pigmented macrophages was decreased when compared to previous exposure. Reactive hyperplasia was noticed after second exposure or either recovery. However, significant differences were observed between the first and second exposure or the first and second recovery. In particular, the number of PMNs was significantly higher after the second exposure than after the first exposure. Also, all cell types in the BALF were significantly elevated in the high-dose second recovery group than in the first recovery group, indicating an incomplete recovery from second exposure. In conclusion, these results indicated that the lung damage caused by the second welding-fume exposure was more difficult to recover from than the first exposure.

Pulmonary Toxicity and Recovery from Inhalation of Manual Metal Arc Stainless Steel Welding Fumes in Rats.

The objectives of this study were to examine the lung injury and inflammation caused by manual metal arc stainless steel (MMA-SS) welding fume inhalation and to evaluate the recovery process. Sprague-Dawley rats were exposed to MMA-SS welding fumes for 2 h per day in a whole-body exposure chamber, with a total suspended particulate (TSP) concentration of 51.4 ± 2.8 mg/m3 (low dose) or 84.6 ± 2.9 mg/m3 (high dose) for 30 days. The animals were sacrificed after 30 days of exposure as well as after a 30-day recovery period. To assess the inflammatory or injury responses, cellular and biochemical parameters as well as cytokines were assayed in the bronchoalveolar lavage fluid (BALF). MMA-SS welding fume exposure led to a significant elevation in the number of alveolar macrophages (AM) and polymorphonuclear cells (PMN). Additionary, the values of β-nacetyl glucosaminidase (β-NAG) and lactate dehydrogenase (LDH) in the BALF were increased in the exposed group when compared to controls. After 30 days of recovery from exposure, a significant reduction in inflammatory parameters of BALF was observed between the exposed and recovered groups. Slight, but significant elevations were noted in the number of AM and PMN in the recovered groups, and AM that had been ingested fume particles still remain in the lungs. In conclusion, these results indicated that welding fumes induced inflammatory responses and cytotoxicity in the lungs of exposed rats. Fume particles were not fully cleared from lungs even after a 30-day recovery period.

Recovery from Welding-Fume-Exposure-Induced MRI T1 Signal Intensities after Cessation of Welding-Fume Exposure in Brains of Cynomolgus Monkeys

The shortening of the MRI T1 relaxation time, indicative of a high signal intensity in a T1-weighted MRI, is known as a useful biomarker for Mn exposure after short-term welding-fume exposure. A previous monkey experimental study found that the T1 relaxation times decreased time-dependently after exposure, and a visually detectable high signal intensity appeared after 150 days of exposure. The nadir for the shortening of the T1 relaxation time was also previously found to correspond well with the blood Mn concentration in welders, suggesting a correlation between a prolonged high blood Mn concentration and shortened T1 relaxation time. Accordingly, to clarify the clearance of the brain Mn concentration after the cessation of welding-fume exposure, cynomolgus monkeys were assigned to 3 groups—unexposed, low dose (31 mg/m3 total suspended particulate (TSP), 0.9 mg Mn/m3), and high dose (62 mg/m3 TSP, 1.95 mg Mn/m3)—and exposed to manual metal-arc stainless steel (MMA-SS) welding fumes for 2 h per day for 8 mo in an inhalation chamber system equipped with an automatic fume generator. After reaching the peak MRI T1 signal intensity (shortest T1 relaxation time), the monkeys were allowed to recover by ceasing the welding-fume exposure. Within 2 mo, the MRI T1 signal intensities for the exposed monkeys returned to nearly the same level as those for the unexposed monkeys, indicating the potential for recovery from a high MRI T1 signal intensity induced by welding-fume exposure, even after prolonged exposure. Clearance of the Mn tissue concentration was also demonstrated in the globus pallidus, plus other tissues from the brain, liver, spleen, and blood. In contrast, there was no clearance of the lung concentrations of Mn, indicating that a soluble form of Mn was transported to the blood and brain. Therefore, the solubility of Mn in welding fumes would appear to be an important determinant as regards the retention of blood Mn levels and brain tissue Mn concentrations in welders.

Changes of Glycoconjugate Expression in Nasal Respiratory Mucosa of Rats Exposed to Welding Fumes

To investigate the effects of welding fumes on the glycoconjugates in nasal respiratory mucosa, male Sprague-Dawley rats were exposed to manual metal arc stainless steel (MMA-SS) welding fumes at a concentration of 56–76 mg/m3 total suspended particulate for 2 h/day in an inhalation chamber for 90 days. During the exposure period, the experimental animals were sacrificed after 2 h and 15, 30, 60, and 90 days of exposure; then sections were examined using lectin histochemistry. Some remarkable changes, such as destroyed cilia, desquamation and mucification of epithelial cells, and destruction of nasal septal glands, were seen in the welding fume-exposed groups. Specific changes in the lectin binding patterns were also observed in the welding fume-exposed rats. The Ricinus communis agglutinin-I (RCA-I) staining of the cilia and columnar cells increased slightly when compared with the unexposed rats. The RCA-I and Ulex europaeus agglutinin-I (UEA-I) staining of the goblet cells also increased as the exposure continued. The mucigenous epithelial cells reacted with Bandeiraea simplicifolia lectin-I (BSL-I), RCA-I, and succinylated wheat germ agglutinin A (sWGA) after 15 days of exposure, which was not visible in the control group. The dorsal septal glands exhibited an affinity with peanut agglutinin (PNA), BSL-I, and RCA-I, which was also not visible in the control group. The affinity for Dolichos biflorus agglutinin (DBA), soybean agglutinin (SBA), PNA, sWGA, BSL-I, and UEA-I in the ventral septal glands of the welding fume-exposed groups tended to increase, whereas the concanavalin A (Con A) reactivity in the dorsal septal glands decreased slightly. In conclusion, it was assumed that the changes in the glycoconjugate residues in the nasal respiratory mucosa of the welding fume-exposed rats represented important components of defense mechanisms against the toxicants in the welding fumes.

Tissue Distribution of Manganese in Iron-Sufficient or Iron-Deficient Rats After Stainless Steel Welding-Fume Exposure

Welders can be exposed to high levels of manganese through welding fumes. Although it has already been suggested that excessive manganese exposure causes neurotoxicity, called manganism, the pathway of manganese transport to the brain with welding-fume exposure remains unclear. Iron is an essential metal that maintains a homeostasis in the body. The divalent metal transporter 1 (DMT1) transports iron and other divalent metals, such as manganese, and the depletion of iron is known to upregulate DMT1 expression. Accordingly, this study investigated the tissue distribution of manganese in iron-sufficient and iron-deficient rats after welding-fume exposure. The feeding of an iron-deficient diet for 4 wk produced a depletion of body iron, such as decreased iron levels in the serum and tissues, and upregulated the DMT1 expression in the rat duodenum. The iron-sufficient and iron-deficient rats were then exposed to welding fumes generated from manual metal arc stainless steel at a concentration of 63.5 ± 2.3 mg/m3 for 2 h per day over a 30-day period. Animals were sacrificed on days 1, 15, and 30. The level of body iron in the iron-deficient rats was restored to the control level after the welding-fume exposure. However, the tissue distributions of manganese after the welding-fume exposure showed similar patterns in both the iron-sufficient and iron-deficient groups. The concentration of manganese increased in the lungs and liver on days 15 and 30, and increased in the olfactory bulb on day 30. Slight and heterogeneous increases of manganese were observed in different brain regions. Consequently, these findings suggest that the presence of Fe in the inhaled welding fumes may not have a significant effect on the uptake of Mn into the brain. Thus, the condition of iron deficiency did not seem to have any apparent effect on the transport of Mn into the brain after the inhalation of welding fumes.

Comparison of High MRI T1 Signals with Manganese Concentration in Brains of Cynomolgus Monkeys After 8 Months of Stainless Steel Welding-Fume Exposure

Several pharmacokinetic studies on inhalation exposure to manganese (Mn) have already demonstrated that Mn readily accumulates in the olfactory and brain regions. However, a shortening of the magnetic resonance imaging (MRI) T1 relaxation time or high T1 signal intensity in specific sites of the brain, including the globus pallidus and subcortical frontal white matter, as indicative of tissue manganese accumulation has not yet been clearly established for certain durations of known doses of welding-fume exposure in experimental animals. Accordingly, to investigate the movement of manganese after welding-fume exposure, six cynomolgus monkeys were acclimated and assigned to three dose groups: unexposed, low dose (31 mg/m3 total suspended particulate [TSP], 0.9 mg/m3 of Mn), and high dose (62 mg/m3 TSP, 1.95 mg/m3 of Mn) of total suspended particulate. The primates were exposed to manual metal arc stainless steel (MMA-SS) welding fumes for 2 h per day in an inhalation chamber system equipped with an automatic fume generator. Magnetic resonance imaging (MRI) studies were conducted before the initiation of exposure and thereafter every month. The tissue Mn concentrations were then measured after a plateau was reached regarding the shortening of the MRI T1 relaxation time. A dose-dependent increase in the Mn concentration was found in the lungs, while noticeable increases in the Mn concentrations were found in certain tissues, such as the liver, kidneys, and testes. Slight increases in the Mn concentrations were found in the caudate, putamen, frontal lobe, and substantia nigra, while a dose-dependent noticeable increase was only found in the globus pallidus. Therefore, the present results indicated that a shortening of the MRI T1 relaxation time corresponded well with the Mn concentration in the globus pallidus after prolonged welding-fume exposure.

Changes in Blood Manganese Concentration and MRI T1 Relaxation Time During 180 Days of Stainless Steel Welding-Fume Exposure in Cynomolgus Monkeys

Welders are at risk of being exposed to high concentrations of welding fumes and developing pneumoconiosis or other welding-fume exposure-related diseases. Among such diseases, manganism resulting from welding-fume exposure remains a controversial issue, as although the movement of manganese into specific brain regions has been established, the similar movement of manganese presented with other metals, such as welding fumes, has not been clearly demonstrated as being similar to that of manganese alone. Meanwhile, the competition between Mn and iron for iron transporters, such as transferrin and DMT-1, to the brain has also been implicated in the welding-fume exposure. Thus, the increased signal intensities in the basal ganglia, including the globus pallidus and subcortical frontal white matter, based on T1-weighted magnetic resonances in welders, require further examination as regards the correspondence with an increased manganese concentration. Accordingly, to investigate the movement of manganese after welding-fume exposure, 6 cynomolgus monkeys were acclimated for 1 mo and assigned to 3 dose groups: unexposed, low dose of (total suspended particulate [TSP] 31 mg/m3, 0.9 mg/m3 of Mn), and high dose of total suspended particulate (62 mg/m3 TSP, 1.95 mg/m3 of Mn). The primates were exposed to manual metal-arc stainless steel (MMA-SS) welding fumes for 2 h/day in an inhalation chamber system equipped with an automatic fume generator for 6 mo. Magnetic resonance imaging (MRI) studies of the basal ganglia were conducted before the initiation of exposure and thereafter every month. During the exposure, the blood chemistry was monitored every 2 wk and the concentrations of metal components in the blood were measured every 2 wk and compared with ambient manganese concentrations. The manganese concentrations in the blood did not show any significant increase until after 2 mo of exposure, and then reached a plateau after 90 days of exposure, showing that an exposure period of at least 60 days was required to build up the blood Mn concentration. Furthermore, as the blood Mn concentration continued to build, a continued decrease in the MRI T1 relaxation time in the basal ganglia was also detected. These data suggested that prolonged inhalation of welding fumes induces a high MRI T1 signal intensity with an elevation of the blood manganese level. The presence of a certain amount of iron or other metals, such as Cr and Ni, in the inhaled welding fumes via inhalation was not found to have a significant effect on the uptake of Mn into the brain or the induction of a high MRI T1 signal intensity.

Effects of repeated welding fumes exposure on the histological structure and mucins of nasal respiratory mucosa in rats

To investigate the effects of welding fumes on the histological structure and properties of mucins of the nasal respiratory mucosa, Sprague–Dawley rats were exposed to manual metal arc-stainless steel (MMA-SS) welding fumes at a concentration of 56–76 mg/m 3 total suspended particulates for 2 h per day in an inhalation chamber for 90 days. Experimental animals were sacrificed at 2 h, 15, 30, 60 and 90 days after exposure. Loss of cilia, desquamation of epithelial cells, mucigenous epithelial cells and destruction of nasal septal glands were observed frequently in the welding fumes-exposed groups. These changes became more severe as the exposure continued. The amount of neutral mucins in goblet cells in the welding fumes-exposed group had a tendency to increase, the amount of sulfomucins decreased, while the sialomucins increased as the exposure continued. Mucinogenic epithelial cells, not visible in the control group, contained minimal to small amounts of neutral mucins. In the dorsal septal glands, neutral mucins not visible in the control group appeared, and neutral mucins in the ventral septal glands increased slightly. These results indicate that the observed changes in the properties of mucins due to inhalation of welding fumes may play roles in protection against toxicants.

Lipoperoxidation products and thiol antioxidants in chromium exposed workers

Hexavalent chromium is an established carcinogenic agent, which is not directly reactive with DNA. Its genotoxicity involves a reduction step, producing reactive oxygen species and radicals, and also lower valence forms which form stable complexes with intracellular macromolecules. The trivalent form of chromium may directly react with the genetic material and has also been shown to generate oxidative damage in vitro. To further evaluate the importance of in vivo oxidative DNA damage in the toxicity of each valence form, we conducted a comparative study on hexavalent and trivalent chromium-exposed workers (manual metal arc stainless steel welders and leather tanning workers), focusing on the total oxidative status by quantifying the level of lipoperoxidation products in urine. Thiol antioxidants are important in response to oxidative stress, and therefore, the concentration of glutathione and cysteine in peripheral blood lymphocytes was also determined. Chromium exposure was evaluated by quantifying total chromium in plasma and urine. Both groups had a significant increase in lipid peroxidation products expressed as malondialdehyde (MDA) in urine (tanners 1.42 +/- 0.61 micromol/g creatinine, welders 1.67 +/- 1.13 micromol/g creatinine versus controls 0.81 +/- 0.26 micromol/g creatinine, P < 0.005 in both cases) but only welders had a significant decrease in glutathione concentration in lymphocytes. There was a positive correlation between chromium in plasma and urinary MDA in welders, but not in tanners. This work is part of a larger study of which major results have been published previously including cytogenetics and DNA-protein cross-links in workers exposed to the two different forms of chromium. These results are compared with the results of oxidative damage from this study.

Inflammatory and genotoxic responses during 30-day welding-fume exposure period

Welder’s pneumoconiosis has generally been determined to be benign and unassociated with respiratory symptoms based on the absence of pulmonary-function abnormalities in welders with marked radiographic abnormalities. In previous studies, the current authors suggested a three-phase lung fibrosis process to study the pathological process of lung fibrosis and found that the critical point for recovery was after 30 days of welding-fume exposure at a high dose, at which point early and delicate fibrosis was observed in the perivascular and peribronchiolar regions. Accordingly, the current study investigated the inflammatory and genotoxic responses during a 30-day period of welding-fume exposure to elucidate the process of fibrosis. As such, rats were exposed to manual metal arc-stainless steel (MMA-SS) welding fumes at concentrations of 65.6 ± 2.9 (low dose) and 116.8 ± 3.9 mg/m 3 (high dose) total suspended particulate for 2 h per day in an inhalation chamber for 30 days. Animals were sacrificed after the initial 2 h exposure, and after 15 and 30 days of exposure. The rats exposed to the welding fumes exhibited a statistically significant ( P < 0.05) decrease in body weight when compared to the control during the 30-day exposure period, yet an elevated cellular differential count and higher levels of albumin, LDH, and β-NAG, but not elevated TNF-α, and IL-1β in the acellular bronchoalveolar lavage fluid. In addition, the DNA damage resulting from 30 days of welding-fume exposure was confirmed by a comet assay and the inmmunohistochemistry for 8-hydroxydeoxyguanine (8-OH-dG). Consequently, the elevated inflammatory and genotoxic indicators confirmed the lung injury and inflammation caused by the MMA-SS welding-fume exposure.

Manganese Distribution in Brains of Sprague–Dawley Rats After 60 Days of Stainless Steel Welding-Fume Exposure

Welders working in a confined space, as in the shipbuilding industry, are at risk of being exposed to high concentrations of welding fumes and developing pneumoconiosis or other welding-fume exposure related diseases. Among such diseases, manganism resulting from welding-fume exposure remains a controversial issue, as the movement of manganese into specific brain regions has not yet been clearly established. Accordingly, to investigate the distribution of manganese in the brain after welding-fume exposure, male Sprague–Dawley rats were exposed to welding fumes generated from manual metal arc-stainless steel (MMA-SS) at concentrations of 63.6 ± 4.1 mg/m 3 (low dose, containing 1.6 mg/m 3 Mn) and 107.1 ± 6.3 mg/m 3 (high dose, containing 3.5 mg/m 3 Mn) total suspended particulate (TSP) for 2 h per day in an inhalation chamber over a 60-day period. Blood, brain, lung, and liver samples were collected after 2 h, 15, 30, and 60 days of exposure and the tissues analyzed for their manganese concentrations using an atomic absorption spectrophotometer. Although dose- and time-dependent increases in the manganese concentrations were found in the lungs and livers of the rats exposed for 60 days, only slight manganese increases were observed in the blood during this period. Major statistically significant increases in the brain manganese concentrations were detected in the cerebellum after 15 days of exposure and up until 60 days. Slight increases in the manganese concentrations were also found in the substantia nigra, basal ganglia (caudate nucleus, putamen, and globus pallidus), temporal cortex, and frontal cortex, thereby indicating that the pharmacokinetics and distribution of the manganese inhaled from the welding fumes were different from those resulting from manganese-only exposure.

Recovery from manual metal arc-stainless steel welding-fume exposure induced lung fibrosis in Sprague–Dawley rats

Welders with radiographic pneumoconiosis abnormalities have exhibited a gradual clearing of the X-ray identified effects following removal from exposure. In some cases, the pulmonary fibrosis associated with welding fumes appears in a more severe form in welders. Accordingly, to investigate the disease and recovery process of pneumoconiosis induced by welding-fume exposure, rats were exposed to welding fumes with concentrations of 63.6±4.1 mg/m 3 (low dose) and 107.1±6.3 mg/m 3 (high dose) of total suspended particulate for 2 h per day in an inhalation chamber for a total of 2 h or 15, 30, 60 or 90 days. Thereafter, the rats were no longer exposed and allowed to recover from the welding fume-induced lung fibrosis for 90 days. When compared to the unexposed control group, the lung weights significantly increased in both the low- and high-dose rats from day 15 to 90. A histopathological examination combined with fibrosis-specific staining revealed that the lungs from the low-dose rats did not exhibit any significant progressive fibrotic changes. Whereas, the lungs from the high-dose rats exhibited early delicate fibrosis from day 15, which progressed into the perivascular and peribronchiolar regions by day 30. Interstitial fibrosis appeared at day 60 and became prominent by day 90, along with the additional appearance of pleural fibrosis. Recovery, evaluated based on the body and lung weights and a histopathological examination, was observed in both the high and low-dose rats that were exposed up to 30 days. The rats exposed for 60–90 days at the low dose also recovered from the fibrosis, yet the rats exposed for 60–90 days at the high dose did not fully recover. Consequently, recovery from pneumoconiosis induced by welding-fume exposure was observed when the degree of exposure was short-term and moderate.