Manual DNA Research Articles

Interlaboratory Evaluation of Different Extraction and Real-Time PCR Methods for Detection ofCoxiella burnetiiDNA in Serum

In the Netherlands, there is an ongoing and unparalleled outbreak of Q fever. Rapid and reliable methods to identify patients infected with Coxiella burnetii, the causative agent of Q fever, are urgently needed. We evaluated the performance of different DNA extraction methods and real-time PCR assays that are in use in seven diagnostic or reference laboratories in the Netherlands. A low degree of variation in the sensitivities of most of the developed real-time PCR assays was observed. However, PCR assays amplifying short DNA fragments yielded better results than those producing large DNA fragments. With regard to DNA extraction, the automated MagNA Pure Compact system and the manual QIAamp DNA mini kit consistently yielded better results than either the MagNA Pure LC system and NucliSens EasyMag (both automated) or the High Pure viral nucleic acid kit (manual). The present study shows that multiple combinations of DNA extraction kits and real-time PCR assays offer equivalent solutions to detect C. burnetii DNA in serum samples from patients suspected to have Q fever.

A real‐time (TaqMan) PCR assay to differentiate Monilinia fructicola from other brown rot fungi of fruit crops

To prevent the entry and spread of the brown rot fungus Monilinia fructicola in Europe, a fast and reliable method for detection of this organism is essential. In this study, an automated DNA extraction method combined with a multiplex real‐time PCR based on TaqMan chemistry was developed for fast, convenient and reliable detection of both the EU quarantine organism Monilinia fructicola and the three other brown rot fungi M. fructigena, M. laxa and Monilia polystroma. Using the internal transcribed spacer (ITS) region of the nuclear ribosomal RNA gene repeat, a Monilinia genus‐specific primer pair and two differently labelled fluorogenic probes specific for M. fructicola and the group M. fructigena/M. laxa/Monilia polystroma were developed. The analytical specificity of the assay was assessed by testing 33 isolates of the four brown rot fungi and 13 isolates of related fungal species or other fungal species that can be present on stone and pome fruit. No cross‐reactions were observed. The assay was found to have a detection limit of 0·6 pg of DNA, corresponding to 27 haploid genomes or four conidia. Comparison of a manual DNA isolation followed by a conventional PCR with an automated DNA isolation combined with the presently developed real‐time PCR showed that the latter method gave improved results when tested with 72 naturally infected stone fruit samples. The detection rate increased from 65 to 97%.

Prenatal determination of fetal RhD genotype by real-time PCR examination of fetal DNA in maternal plasma

Objective To set up a novel non-invasive prenatal determination technique of fetal RhD genotype by real-time PCR examination of fetal DNA in RhD negative maternal plasma.Methods Plasma fetal DNA was extracted by manual DNA micro-extraction method from the plasma of 22 RhD negative women(15-40 gestation week).We amplified the exons 7,10 and intron 4 of RhD gene and sex-determining region Y gene(SRY) using real-time polymerase chain reaction.The presence of fetal DNA was confirmed by testing SRY.The results of genotyping and serum RhD status of the newborns were compared to evaluate the accuracy of the present method.Results Cell-free fetal DNA was detected in the maternal plasma samples.Among the 19 RhD negative specimens,14 cases had the specifically amplified exons 7,10 and intron 4 of RhD gene and SRY gene,and the results were confirmed by serological examination of fetal umbilical blood after delivery.Among the 19 specimens,3 cases were not detected the specifically amplified in exons 7,10 and intron 4 of RhD gene and SRY gene,and the results were also confirmed by serological examination of fetal umbilical blood.The accuracy of the present method was 89.5%.SRY detection confirmed fetal DNA presence in maternal plasma in all boys.The other 2 cases only had specifically amplified exons 10 of RhD gene,and the results were confirmed as RhDel phenotype.Real-time PCR easily differentiated pregnant woman whose RBCs had a weak D phenotype(n=3) from truly RhD-negative patients.However,in these cases fetal RhD status cannot be determined.Conclusion Real time PCR detection of fetal DNA in RhD-negative maternal plasma is simple,quick and specific for noninvasive prenatal diagnosis of fetal RhD blood type,which can help to prevent hemolytic disease of newborns.

A criminalistic approach to biological evidence: Trace DNA and volume crime

iments were conducted using liquid blood aliquotswhichwere serially diluted to achieve dilutions between 0.1 ng/μl and 0.0007 ng/μl. From eight dilutions, 5 μl aliquots were simultaneously sampled for the automated and manual DNA profiling systems. The results of both systems were assessed using allele scoring as per NDNAD loading criteria. The first sensitivity experiment (n=3) showed 69% of samples gave equal to or more loadable alleles when profiled using the automated profiling system. The second sensitivity experiment (n=5) showed 39 % of samples gave equal to or more loadable alleles when profiled using the automated profiling system. As the results from the sensitivity experiments are variable we will maintain a manual profiling system for critical samples or samples thought to yield-low concentrations of DNA. Assessing the audit trail for samples showed that on all occasions the sample name was correctly transferred from the extraction batch to the quantification record, PCR record, and DNA electropherogram printout. In conclusion, we have designed a system which can obtain DNA profiles and manage sample data effectively from all the tested sample types such that we can process the majority of samples encountered within SPSA Forensic Services, Glasgow.

Evaluation of Automated and Manual Commercial DNA Extraction Methods for Recovery of Brucella DNA from Suspensions and Spiked Swabs

This study evaluated automated and manual commercial DNA extraction methods for their ability to recover DNA from Brucella species in phosphate-buffered saline (PBS) suspension and from spiked swab specimens. Six extraction methods, representing several of the methodologies which are commercially available for DNA extraction, as well as representing various throughput capacities, were evaluated: the MagNA Pure Compact and the MagNA Pure LC instruments, the IT 1-2-3 DNA sample purification kit, the MasterPure Complete DNA and RNA purification kit, the QIAamp DNA blood mini kit, and the UltraClean microbial DNA isolation kit. These six extraction methods were performed upon three pathogenic Brucella species: B. abortus, B. melitensis, and B. suis. Viability testing of the DNA extracts indicated that all six extraction methods were efficient at inactivating virulent Brucella spp. Real-time PCR analysis using Brucella genus- and species-specific TaqMan assays revealed that use of the MasterPure kit resulted in superior levels of detection from bacterial suspensions, while the MasterPure kit and MagNA Pure Compact performed equally well for extraction of spiked swab samples. This study demonstrated that DNA extraction methodologies differ in their ability to recover Brucella DNA from PBS bacterial suspensions and from swab specimens and, thus, that the extraction method used for a given type of sample matrix can influence the sensitivity of real-time PCR assays for Brucella.

Multicenter Comparative Evaluation of Five Commercial Methods for Toxoplasma DNA Extraction from Amniotic Fluid

Over the past few years, a number of new nucleic acid extraction methods and extraction platforms using chemistry combined with magnetic or silica particles have been developed, in combination with instruments to facilitate the extraction procedure. The objective of the present study was to investigate the suitability of these automated methods for the isolation of Toxoplasma gondii DNA from amniotic fluid (AF). Therefore, three automated procedures were compared to two commercialized manual extraction methods. The MagNA Pure Compact (Roche), BioRobot EZ1 (Qiagen), and easyMAG (bioMérieux) automated procedures were compared to two manual DNA extraction kits, the QIAamp DNA minikit (Qiagen) and the High Pure PCR template preparation kit (Roche). Evaluation was carried out with two specific Toxoplasma PCRs (targeting the 529-bp repeat element), inhibitor search PCRs, and human beta-globin PCRs. The samples each consisted of 4 ml of AF with or without a calibrated Toxoplasma gondii RH strain suspension (0, 1, 2.5, 5, and 25 tachyzoites/ml). All PCR assays were laboratory-developed real-time PCR assays, using either TaqMan or fluorescent resonance energy transfer probes. A total of 1,178 PCRs were performed, including 978 Toxoplasma PCRs. The automated and manual methods were similar in sensitivity for DNA extraction from T. gondii at the highest concentration (25 Toxoplasma gondii cells/ml). However, our results showed that the DNA extraction procedures led to variable efficacy in isolating low concentrations of tachyzoites in AF samples (<5 Toxoplasma gondii cells/ml), a difference that might have repercussions since low parasite concentrations in AF exist and can lead to congenital toxoplasmosis.

Accurate chromosome testing of miscarriages with manual vacuum aspiration (MVA) and DNA technologies: overcoming culture failure and maternal cell contamination (MCC) from cultured decidua

Accurate chromosome testing of miscarriages with manual vacuum aspiration (MVA) and DNA technologies: overcoming culture failure and maternal cell contamination (MCC) from cultured decidua

Optimized manual and automated recovery of amplifiable DNA from tissues preserved in buffered formalin and alcohol-based fixative

Archival tissue preserved in fixative constitutes an invaluable resource for histological examination, molecular diagnostic procedures and for DNA typing analysis in forensic investigations. However, available material is often limited in size and quantity. Moreover, recovery of DNA is often severely compromised by the presence of covalent DNA–protein cross-links generated by formalin, the most prevalent fixative. We describe the evaluation of buffer formulations, sample lysis regimens and DNA recovery strategies and define optimized manual and automated procedures for the extraction of high quality DNA suitable for molecular diagnostics and genotyping. Using a 3-step enzymatic digestion protocol carried out in the absence of dithiothreitol, we demonstrate that DNA can be efficiently released from cells or tissues preserved in buffered formalin or the alcohol-based fixative GenoFix™. This preparatory procedure can then be integrated to traditional phenol/chloroform extraction, a modified manual DNA IQ™ or automated DNA IQ™/Te-Shake™-based extraction in order to recover DNA for downstream applications. Quantitative recovery of high quality DNA was best achieved from specimens archived in GenoFix™ and extracted using magnetic bead capture.

Automated DNA isolation for databasing purposes

Nowadays, automation is crucial in databasing laboratories especially for countries which are relative new in the field and must quickly reach the minimum standards of consecrated databasing laboratories from Europe and USA. In our efforts to supply genetic profiles for Romanian National DNA Database, we evaluated the Freedom Evo 150 liquid handling platform with AGOWA sep9600 magnetic separator in different running conditions and workflows, for reaching the most efficient ones. We compared the results with those obtained from manual DNA isolation with Chelex resin and paramagnetic particles. For this we used a total of 6246 biological reference samples (5220 - automated processed and 1026 - manually processed), amplified using AmpFlstr Identifiler Kit and analyzed by capillary electrophoresis using ABI Prism 3100 Genetic Analyzer.

Endocervical swabs transported in first void urine as combined specimens in the detection of Mycoplasma genitalium by real-time PCR

The aim of this study was to determine whether a patient's endocervical swab specimen can be transported in first void urine (FVU) as combined specimens for the detection of Mycoplasma genitalium by real-time PCR. The study also compared two different DNA extraction methods for observation of possible PCR inhibition. Three specimens, one endocervical swab specimen transported in 2-SP medium, one endocervical swab specimen transported in FVU and a FVU specimen, were collected from 329 women. All sample types underwent manual DNA extraction whereas in the DNA extraction study, 329 endocervical swab specimens transported in FVU were subjected to both manual Chelex and automated BioRobot M48 DNA extraction. A total of 100 endocervical swab specimens transported in FVU from patients PCR-negative for M. genitalium in the study were used in the PCR inhibition analysis. M. genitalium was detected in 25/329 (7.6 %) women. The endocervical swab specimens transported in 2-SP medium and transported in FVU were positive for M. genitalium in 17/25 (68 %) and 24/25 (96 %) women, respectively. The FVU specimens alone were positive for M. genitalium in 22/25 (88 %) women. In the DNA extraction study, M. genitalium DNA was detected in 24/329 (7.3 %) and 28/329 (8.5 %) of endocervical swab specimens transported in FVU subjected to manual Chelex extraction and automated BioRobot M48 extraction, respectively. Partial PCR inhibition was detected in 6 % of samples subjected to manual Chelex extraction whereas no inhibition was detected with the automated BioRobot M48 extraction. Thus endocervical swab specimens transported in FVU demonstrate higher sensitivity than FVU specimens only and have considerably increased sensitivity compared with endocervical swab specimens transported in 2-SP medium for detection of M. genitalium DNA. Moreover, automated BioRobot M48 extraction was shown to be superior to a crude manual Chelex extraction, leaving no PCR inhibition and giving a slightly higher DNA yield and/or better sensitivity.

131-P: Protein contamination in manual DNA extraction methods

131-P: Protein contamination in manual DNA extraction methods

A new automated method for isolation of Chlamydia trachomatis from urine eliminates inhibition and increases robustness for NAAT systems

Chlamydia trachomatis is a leading cause of sexually transmitted infection. Diagnostic methods with easy non-invasive sample collection are important to increase testing and hence to reduce the spread of this infection. To enable more use of urine samples in C. trachomatis diagnostics, automation is an absolute requirement since obtaining high-quality DNA from urine specimens involves extensive processing. Here, we present a study in which a new automated sample preparation method, BUGS'n BEADS™ STI (BnB STI), was used up-front of the BDProbeTec™ ET end point analysis and compared with the full BDProbeTec™ ET method to analyze C. trachomatis in 1002 urine samples. The BnB STI system represents a new concept within magnetic sample preparation in which bacteria are first isolated from the sample material followed by purification of bacterial nucleic acid using the same magnetic particles. Similar sensitivity and specificity were obtained with both methods. None of the samples processed with BnB STI inhibited the BDProbeTec™ ET test whereas 1.8% showed inhibition when processed according to the manual BDProbeTec™ ET DNA preparation method. Moreover, the average MOTA scores obtained with the BnB STI system were 48% higher for all amplification controls and 57% higher for positive samples, compared to the manual sample preparation. Based on these results and the significant reduction in hands-on-time for urine sample processing, the automated BnB STI sample preparation method was implemented for routine analysis of C. trachomatis from urine samples.

Operational Feasibility of Using Loop-Mediated Isothermal Amplification for Diagnosis of Pulmonary Tuberculosis in Microscopy Centers of Developing Countries

The characteristics of loop-mediated isothermal amplification (LAMP) make it a promising platform for the molecular detection of tuberculosis (TB) in developing countries. Here, we report on the first clinical evaluation of LAMP for the detection of pulmonary TB in microscopy centers in Peru, Bangladesh, and Tanzania to determine its operational applicability in such settings. A prototype LAMP assay with simplified manual DNA extraction was evaluated for accuracy and ease of use. The sensitivity of LAMP in smear- and culture-positive sputum specimens was 97.7% (173/177 specimens; 95% confidence interval [CI], 95.5 to 99.9%), and the sensitivity in smear-negative, culture-positive specimens was 48.8% (21/43 specimens; CI, 33.9 to 63.7%). The specificity in culture-negative samples was 99% (500/505 specimens; CI, 98.1 to 99.9%). The average hands-on time for testing six samples and two controls was 54 min, similar to that of sputum smear microscopy. The optimal amplification time was 40 min. No indeterminate results were reported, and the interreader variability was 0.4%. Despite the use of a single room without biosafety cabinets for all procedures, no DNA contamination was observed. The assay was robust, with high end-point stability and low rates of test failure. Technicians with no prior molecular experience easily performed the assay after 1 week of training, and opportunities for further simplification of the assay were identified.

Comparison of manual and automated nucleic acid extraction from whole‐blood samples

Nucleic acid extraction and purification from whole blood is a routine application in many laboratories. Automation of this procedure promises standardized sample treatment, a low error rate, and avoidance of contamination. The performance of the BioRobot M48 (Qiagen) and the manual QIAmp DNA Blood Mini Kit (Qiagen) was compared for the extraction of DNA from whole blood. The concentration and purity of the extracted DNAs were determined by spectrophotometry. Analytical sensitivity was assessed by common PCR and genotyping techniques. The quantity and quality of the generated DNAs were slightly higher using the manual extraction method. The results of downstream applications were comparable to each other. Amplification of high-molecular-weight PCR fragments, genotyping by restriction digest, and pyrosequencing were successful for all samples. No cross-contamination could be detected. While automated DNA extraction requires significantly less hands-on time, it is slightly more expensive than the manual extraction method.

Detection and Differentiation of Bordetella spp. by Real-Time PCR

Molecular detection of Bordetella pertussis DNA is a sensitive and specific method for the rapid diagnosis of pertussis. In this study, a new molecular assay for the detection and differentiation of Bordetella spp. based on automated DNA extraction and real-time PCR was evaluated. The analytical sensitivity of the new assay was determined by Probit analysis of serial dilutions of both cloned PCR products IS481 and IS1001 and cell suspensions of B. pertussis, B. parapertussis, and B. bronchiseptica. The specificity was analyzed by testing a number of pathogens producing respiratory infections. Moreover, a total of 92 clinical samples were investigated. The results were compared to those obtained by an in-house assay based on manual DNA extraction, followed by real-time PCR and detection of IS481. The analytical sensitivity of the new assay for the detection of IS481 and IS1001 was determined to be 2.2 and 1.2 genome equivalents/mul, respectively. The analytical sensitivity for the detection of B. pertussis, B. parapertussis, and B. bronchiseptica was determined to be 1.6, 1.0, and 2.7 genome equivalents/mul, respectively. When clinical specimens were tested with the new assay, 46 of 92 were found to be positive for Bordetella DNA. With the in-house assay, 45 samples tested positive. The new molecular assay proved to be suitable for the rapid diagnosis of pertussis in the routine diagnostic laboratory.

Evaluation of a commercial real-time PCR assay for quantitation of Epstein-Barr virus DNA in different groups of patients

The aim of this study was to evaluate the performance of a molecular assay for quantitation of Epstein-Barr virus (EBV) DNA based on real-time PCR, and to determine EBV DNA levels in EDTA whole blood samples derived from different groups of patients. Following a manual DNA extraction protocol, real-time PCR was performed using the LightCycler EBV Quantification Kit, which demonstrated sufficient accuracy and linearity. Coefficients of variations were found to be between 6 and 42% and 5 and 34%, respectively, for inter-assay and intra-assay variations. In clinical specimens, EBV DNA was detected in all patients with acute EBV infection ( n = 34), in one of 25 adults with past EBV infection, in 16 out of 25 (64%) anti-HIV antibody positive persons, in 10 out of 25 (40%) solid organ transplant recipients, and in none of the 23 infants without history of EBV infection. When EBV DNA levels in positive specimens were compared between different groups, statistically significant differences were not found. The LightCycler EBV Quantification Kit was found to be useful for determination of EBV DNA levels in EDTA whole blood.

Automated DNA Fragments Recognition and Sizing Through AFM Image Processing

This paper presents an automated algorithm to determine DNA fragment size from atomic force microscope images and to extract the molecular profiles. The sizing of DNA fragments is a widely used procedure for investigating the physical properties of individual or protein-bound DNA molecules. Several atomic force microscope (AFM) real and computer-generated images were tested for different pixel and fragment sizes and for different background noises. The automated approach minimizes processing time with respect to manual and semi-automated DNA sizing. Moreover, the DNA molecule profile recognition can be used to perform further structural analysis. For computer-generated images, the root mean square error incurred by the automated algorithm in the length estimation is 0.6% for a 7.8 nm image pixel size and 0.34% for a 3.9 nm image pixel size. For AFM real images we obtain a distribution of lengths with a standard deviation of 2.3% of mean and a measured average length very close to the real one, with an error around 0.33%.

High-Throughput Molecular Testing of Ticks Using a Liquid-Handling Robot

To meet the need for high-throughput sample testing, DNA extraction kits based on the 96-well plate format have been developed for use with blood and tissue samples. These methods have not been applied to DNA extractions from ticks. To meet this need, we developed a high-throughput method for DNA extraction and polymerase chain reaction (PCR) testing of tick samples. A liquid-handling robot was used to extract DNA in a 96-well binding column plate with vacuum manifold. The quantity, purity, and quality of DNA recovered from Ixodes scapularis Say, 1821 nymphs with this method were reproducible and comparable with existing manual DNA extraction techniques. The DNA yield from pools of five nymphal ticks averaged 0.432 ± 0.04 μg (95% CI). The robot also prepared real-time PCR reactions in 96-well plates, directly from the extracted DNA. A modification of the existing P20 tool resulted in accurate pipetting of 1- to 2-μl volumes with a reproducibility of ±0.038 μl when dispensing 1.0 μl. By using this process, 96 samples can be extracted and tested while reducing human labor to ≈30 min.

High-Throughput Molecular Testing of Ticks Using a Liquid-Handling Robot

To meet the need for high-throughput sample testing, DNA extraction kits based on the 96-well plate format have been developed for use with blood and tissue samples. These methods have not been applied to DNA extractions from ticks. To meet this need, we developed a high-throughput method for DNA extraction and polymerase chain reaction (PCR) testing of tick samples. A liquid-handling robot was used to extract DNA in a 96-well binding column plate with vacuum manifold. The quantity, purity, and quality of DNA recovered from Ixodes scapularis Say, 1821 nymphs with this method were reproducible and comparable with existing manual DNA extraction techniques. The DNA yield from pools of five nymphal ticks averaged 0.432 +/- 0.04 microg (95% CI). The robot also prepared real-time PCR reactions in 96-well plates, directly from the extracted DNA. A modification of the existing P20 tool resulted in accurate pipetting of 1- to 2-microl volumes with a reproducibility of +/- 0.038 microl when dispensing 1.0 microl. By using this process, 96 samples can be extracted and tested while reducing human labor to approximately 30 min.

TaqMan DNA technology confirms likely overestimation of cod (Gadus morhua L.) egg abundance in the Irish Sea: implications for the assessment of the cod stock and mapping of spawning areas using egg‐based methods

Recent substantial declines in northeastern Atlantic cod stocks necessitate improved biological knowledge and the development of techniques to complement standard stock assessment methods (which largely depend on accurate commercial catch data). In 2003, an ichthyoplankton survey was undertaken in the Irish Sea and subsamples of 'cod-like' eggs were analysed using a TaqMan multiplex, PCR (polymerase chain reaction) assay (with specific probes for cod, haddock and whiting). The TaqMan method was readily applied to the large number of samples (n = 2770) generated during the survey and when combined with a manual DNA extraction protocol had a low failure rate of 6%. Of the early stage 'cod-like' eggs (1.2-1.75 mm diameter) positively identified: 34% were cod, 8% haddock and 58% whiting. As previous stock estimates based on egg surveys for Irish Sea cod assumed that the majority of 'cod-like' eggs were from cod, the TaqMan results confirm that there was probably substantial contamination by eggs of whiting and haddock that would have inflated estimates of the stock biomass.