Manganese-based Cathode Materials Research Articles

Improving the electrochemical performance of lithium-rich manganese-based cathode materials by Na₂S₂O₈ surface treatment

Lithium-rich manganese-based cathode materials are well-regarded for their high specific capacity and notable voltage thresholds, making them attractive for advanced energy storage applications. However, their widespread commercialization is hindered by challenges in cycle performance, including suboptimal initial Coulombic efficiency, inadequate cycle stability, and constrained rate capability. To address these issues, this paper introduces a novel modification strategy using Na₂S₂O₈ to chemically delithiate the surface of the materials. This modification strategy dramatically enhances the initial Coulombic efficiency. The results demonstrate that the initial Coulombic efficiency of the two pre-activated samples improved to 84.6 % and 102.2 %, respectively. At the same time, the Na₂S₂O₈-treated samples exhibit a higher maximum discharge capacity at a 0.2 C rate, reaching 211.1 mAh g⁻¹ and 201.3 mAh g⁻¹, which notably surpasses the untreated sample's capacity of 188.7 mAh g⁻¹. Additionally, the treated samples exhibit improved cycling and rate performance, with capacity retention of 81.2 % and 63.5 %, respectively. After 60 cycles, these figures continue to be superior to those of the untreated material, which stands at 57.3 %. The results demonstrate that Na₂S₂O₈ treatment leads to the in situ formation of spinel phases on the material surface, thereby enhances the cycling stability and rate capability of the cathode material. Compared to traditional surface treatment methods, Na₂S₂O₈ solution treatment can induce more profound structural evolution without necessitating high-temperature calcination, thus reducing the demands on process conditions and equipment and offering greater process controllability. Moreover, this surface modification strategy paves the way for applying spinel coatings on other substrates with similar structures.

Effect of sites of doped Mg on the stability of lattice oxygen in lithium-rich manganese-based cathode materials

Elemental doping is considered as an effective method for altering the localized electronic structure of lattice oxygen in lithium-rich manganese-based oxides (LRMO) and enhancing their structural stability. However, the effect of doping heteroatoms at different sites on the oxygen redox is not clear. In this work, Mg is introduced into transition metals (TM) and lithium (Li) sites of LRMO at co-precipitation stage and lithiation stage to prepare LRMO-TM and LRMO-Li, respectively. The experimental results and density-functional theory calculations demonstrate that the oxygen release is reduced from 4.1653 nmol mg−1 of pristine to 3.3886 nmol mg−1 of LRMO-Li, and 2.7688 nmol mg−1 of LRMO-TM. The reduction of oxygen release of LRMO-Li is related to the formation of strong Mg-O interactions. Different from that, the lower oxygen release of LRMO-TM is mainly due to the reduction of electron holes in the O 2p state caused by the weaker Mn-O covalency, which effectively restricts the over-oxidization of oxygen. The capacity retention of LRMO-TM is 85.18 % at 0.2C after 200 cycles, which is higher than that of LRMO (78.63 %) and LRMO-Li (82.28 %). This work reveals the mechanism of enhancing lattice oxygen stability caused by Mg doping at different sites.

F-doping effects on microstructure and electrochemical performance of cathode material Li1.2Mn0.54Ni0.13Co0.13O2

Lithium-rich manganese-based (Li-rich Mn-based) cathode materials possess high specific capacity, low self-discharge rate and steady working voltage, but cycle performance and rate performance need to be further improved. In this study, cathode materials Li1.2Mn0.54Ni0.13Co0.13O2-xFx (x = 0, 0.02, 0.05, 0.08) are synthesized by the co-precipitation method with the two-step calcination process. And the F-doping effects on the microstructure and the electrochemical performance are investigated in the cathode materials Li1.2Mn0.54Ni0.13Co0.13O2. The results indicate that among all the F-doped cathode materials, the crystal lattice parameters are increased, order degree and stability of the layered structure are improved. As for x=0.05, cathode material Li1.2Mn0.54Ni0.13Co0.13O1.95F0.05 (LMO-F0.05) shows the best cycle performance and rate performance with its capacity retention rate 87.7% after 100 cycles at 0.2 C and discharge capacity 117 mAh g-1 at 5 C high power. It can be seen that F doping is a simple and crucial strategy to promote the Li ion diffusion and develop high performance layered cathode materials.

Performances of MnO2 and SnO2 Coated MnO2 as Cathode Materials for Aqueous Rechargeable Zinc-ion Batteries

In this study, the micro-emulsion method was used to create the manganese-based cathode materials MnO2 and MnO2@SnO2. For the use as cathode materials in rechargeable zinc-ion batteries, MnO2 and SnO2 coated MnO2@SnO2 were synthesized. FT-IR, Powder X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray Spectroscopy (EDS), and UV-visible Spectroscopy were used to characterize the as-prepared materials. Electrochemical impedance spectroscopy (EIS), battery charge-discharge (BCD), and cyclic voltammetry (CV) techniques were used to investigate the electrochemical properties of the prepared cathode materials for aqueous rechargeable zinc-ion batteries (ARZIBs). The CV profiles were measured in the potential range of 2.1-1.0 V at a scan rate of 20 mV/s. A pair of redox peaks can be seen in the cycle of CV curves. Charge/discharge cycles of SnO2 coated MnO2@SnO2 electrodes are higher than those of pristine MnO2. SnO2 coated MnO2@SnO2 electrodes have better initial charge/discharge capacities than pristine MnO2 electrodes, which is a factor to take into account. In the first cycle, SnO2 coated MnO2@SnO2 electrode has a 26% higher charge capacity than the bare MnO2 electrode. The SnO2 coating on MnO2 may be the cause of the enhanced charge and discharge capabilities of MnO2@SnO2. J. of Sci. and Tech. Res. 5(1): 83-92, 2023

Achieving the dual regulation of microstructure and microdefects in lithium rich materials by electrospinning technology

Lithium-rich manganese-based cathode materials (LNCM) have garnered tremendous attention for the superior reversible capacity. However, the inherently unstable structure and low diffusion kinetics of Li+ hamper their commercialization process. Recent studies have shown that void defects within grains are the main cause of oxygen release and voltage drop during cycling. Therefore, highly crystallinity small particles are the ideal structure for high power density and cycling stability of LNCM. However, improving the crystallinity of materials often means increasing the sintering temperature, which can easily cause material aggregation and grain growth. In this paper, by adopting the electrostatic spinning technology, nanowire shaped precursor are constructed, which facilitates the direct contact between the hot gas flow and the precursor during sintering, thus promoting ion diffusion and material crystallinity. Besides, the electronic and chemical environment in the modified LNCM sample have regulated simultaneously, accompanying with a significant increase in O vacancies, Mn4+ and Ni3+ ions. Adjustments from morphology to molecular structure increased the contact area between the material and electrolyte, improved the diffusion ability of Li+, and enhanced structural stability of the material, resulting in improved rate performance and cycling stability. This study expands our understanding of adopting electrospinning technology to prepare high-performance materials.

Introducing PANI into a Manganese-Based Cathode Material to Improve the Energy Storage Performance of Aqueous Zinc-Ion Batteries by Generating Dual Redox Reactions

Introducing PANI into a Manganese-Based Cathode Material to Improve the Energy Storage Performance of Aqueous Zinc-Ion Batteries by Generating Dual Redox Reactions

Exploration of TiMn/Ti anode for optimizing the structure and performance of electrolytic manganese dioxide

With the deepening application of manganese based cathode materials in new energy vehicle power batteries and wind solar energy storage batteries, diversified application scenarios also demand higher and more diverse performance of manganese based cathodes. This work adopts a new type of TiMn/Ti anode to replace traditional Ti anode preparing electrolytic manganese dioxide (EMD), to meet the requirements of manganese based batteries. Results show that the electrolysis process based on TiMn/Ti anode successfully achieves controllable adjustment of EMD structure by changing process parameters. Besides, the relationship between EMD structure and battery performance was studied. Meanwhile, density functional theory (DFT) calculation reveals that the existence of Mn (III) in EMD is the key to prepare a optimized non-stoichiometry Li1+yMn2-yO4. This work improves the performance of the cathodes of manganese based batteries by optimizing the quality of raw materials, providing a new perspective for the development of high-quality manganese based batteries.

Recycling and Reuse of Mn-Based Spinel Electrode from Spent Lithium-Ion Batteries

In this paper, we introduce an environmentally friendly approach to recycle used batteries and recover highly valuable manganese-based cathode materials. This study demonstrates the feasibility of fast plasma pyrolysis to recover LiMn2O4 electrode materials (e.g., lithium manganese oxide, LMO) and demonstrate their reuse in newly assembled Li-ion cells. The electrochemical performance of as-recycled cathodes shows an initial discharge capacity of 72 mAh/g and is stable for 100 cycles at 0.1 C. After adding 20 mole % of excess LiOH, the recycled LMO after relithiation at 660 °C can deliver an initial discharge capacity of 96 mAh/g and retain a decent discharge capacity of 88 mAh/g after 50 cycles at a 0.2 C rate. Without relithiation, the as-recycled LMO cathode after heating at 1000 °C delivers the best electrochemical cycling performance, including an initial discharge capacity of 94 mAh/g and 50th cycle capacity of 91 mAh/g at a 0.2 C rate. This study highlights a feasible approach for recycling electrode materials in spent LIBs. Recycling of lithium-ion batteries and especially electrode materials is crucial for the sustained growth of the lithium-ion battery industry and reduced environmental issues.

A universal strategy towards high-rate and ultralong-life of Li‐rich Mn‐based cathode materials

Lithium-rich manganese-based cathode materials (LRMs) have shown promise for the next-generation lithium battery cathodes due to their high discharge specific capacity (∼250 mAh g−1) and wide operating voltage range (2.0–4.8 V). However, these materials face limitations such as low initial Coulombic efficiency (ICE), poor cycle stability, and inadequate rate capability. To address these challenges, we employed a simple citric acid treatment (CA-treatment) method to fabricate the Li-rich spinel coating layer on LRMs. This in situ formed spinel Li4Mn5O12 layer successfully suppresses the oxygen release, provides three-dimensional (3D) lithium-ion diffusion channels and enriches Li embedding sites, resulting in a substantial improvement in the rate capability and high-rate cycling performance. The modified LRM delivers a high specific capacity of 193.7 mAh g−1 at 2.0 C and 154.8 mAh g−1 at 5.0 C, after 1000 cycles at 10.0 C, 77.4 % capacity retention with 102.5 mAh g−1 is realized. This facile CA-treatment benefits the electrochemical properties of LRMs comparable to those of altering the microscopic morphology. This work offers a new avenue for exploring outstanding LRMs with high-rate and ultralong cycling life.

Enhanced electrochemical properties of Li1.2Mn0.54Co0.13Ni0.13O2 by modulation of surface oxygen vacancies

The lithium-rich cathode material Li1.2Mn0.54Co0.13Ni0.13O2 (LMR) has attracted significant interest due to its high specific capacity and energy density, which stem from its unique anionic redox chemistry. Oxygen vacancies significantly impact the crystal structure and electrochemical performance of Li-rich manganese-based cathode materials. This study thoroughly examined how sintering temperature affects the crystallinity, morphology, crystal structure, and oxygen vacancy content of the materials, as well as the impact of oxygen vacancies on their structural and electrochemical properties. XPS and EPR analyses are conducted to investigate the relationship between sintering temperature and oxygen vacancies. Additionally, the spinel phase, altered by oxygen vacancies on the material's surface, is identified using Raman, TEM and EELS. Furthermore, first-principles calculations and data from the constant-current intermittent titration technique indicate that oxygen vacancies significantly enhance the material's ion transport rate.

Multifunctional surface modification to enhance the electrochemical performance of lithium-rich manganese-based cathode materials

The preparation of high-performance lithium-rich manganese-based cathode materials (LLOs) require attention to the redox of anions and the migration of transition metals (TM) during the cycling process. In this study, Ce ion-doped Li-rich cathode coated with La0.2Ce0.8O2, which has abundant oxygen vacancies on its surface, was prepared. The presence of the oxygen storage material La0.2Ce0.8O2 can effectively absorb the irreversible oxygen generated during cycling, preventing it from reacting with the electrolyte to form thick cathode electrolyte interface (CEI) coatings. These coatings hinder the relative activity of lattice oxygen in the bulk phase, reducing the specific capacity of the material. Additionally, the 5d metal ion Ce carries a large nuclear charge, causing a 'pinning effect' when it integrates into the LLOs structure. This effect reduces thermal oscillation in the lattice, impedes TM migration during battery charging and discharging, and effectively prevents voltage decay. Results indicate that after 100 cycles at 1C and 25 °C, the surface-coated materials maintain a discharge-specific capacity of 194 mAh/g, compared to 158 mAh/g for uncoated material. Voltage decay decreased from 4.4 mV/cycle to 1.8 mV/cycle, with an ICE of 91.5 % versus the original material's 82.8 %. The modified material also exhibits improved rate performance, retaining a specific capacity of 162 mAh/g at 3C, in contrast to the original material's 123 mAh/g.

Jointly Improving Anionic-Cationic Redox Reversibility of Lithium-Rich Manganese-Based Cathode Materials by N Surface Doping.

The lithium-rich manganese-based layer oxide (LRMO) with high specific capacity (∼300 mAh g-1) and economic feasibility is accepted as the cathode material for high energy density rechargeable batteries. Accompanied by the additional anionic redox reactions during the initial charging process, LRMO presents oxygen release, sluggish Li+ diffusion, and irreversible transition metal ion (TM) migration, which is responsible for its severe structural deterioration and rapid capacity/voltage decay. Here, the N doping strategy is proposed via feasible treatment of oxygen-vacancy-containing Li1.16Ni0.21Mn0.63O2-δ (LNMO) particles. The as obtained LNMO-N samples demonstrate doping N, partially reduced Mn/Ni cations, and oxygen vacancies on the surface. The DFT calculations and experimental results demonstrate that N replacing the crystal oxygen sites on the surface reduces the energy barrier for diffusion, thereby enhancing the kinetics of Li+ diffusion and improving the reversibility of transition metal migration. Furthermore, N doping induces stacking faults and a more flexible structure. Therefore, LNMO-N exhibits a significantly improved anionic-cationic redox reaction reversibility with a high discharge specific capacity of 296.6 mAh g-1 at 20 mA g-1 within the range of 2.0 to 4.8 V and an impressive initial Coulombic efficiency of 85.9%. Moreover, the rate capability is obviously improved with a remarkable capacity of 215.1 mAh g-1 at 200 mA g-1 in 200 cycles with a capacity retention of 72.52% and exceptional performance of 141.4 mAh g-1 even at a higher current density of 1000 mA g-1.

Mitigating chain degradation of lithium-rich manganese-based cathode material by surface engineering

Due to offering joint cationic and anionic redox, lithium-rich manganese-based layered oxides (LMLOs) allow high energy density in lithium-ion batteries. However, the oxygen loss, electrode-electrolyte interface side reactions and the structural degradation have resulted in continuous performance decay, hindering the scale-up application of LMLOs. Here, Li1.3V0.94(BO3)2 (LVB) is uniformly coated on the Li1.2Mn0.54Co0.13Ni0.13O2 (LMNCO) surface by using a sol-gel method combined with a high-temperature calcination. By applying multiple characterizations including in-situ XRD, DEMS, HRTEM, AFM and electrochemical test, we prove that the LVB layer provides a physical barrier, which effectively inhibits the surface reactivity and blocks the chain degradation from the source, improves the reversibility of O2- redox and prevents the phase transition and structural degradation propagating from the surface to the bulk. Moreover, the kinetic investigations and calculations reveal that the LVB modification not only improves the electron conductivity of materials by decreasing the surface work function and increasing the electron density near the Fermi energy level, but also provides expanded pathways with lower impedance to facilitate the Li+ transfer and diffusion. Impressively, the modified cathode exhibits the higher rate performance (151 mAh g-1 at 5C) and improved cycle stability under high cutoff voltage (217.7 mAh g-1 after 200 cycles at 0.2C in 2.0–4.8 V, 92.5 % capacity retention; even in 2.0–5 V, 93.9 % after 100 cycles). This work systematically investigates the inhibiting degradation mechanism and establishes the correlation between the intrinsic structure and surface engineering, and offers valuable insight into the development of high-performance LMLOs.

Electrolyte modification strategies adapted to Li-rich manganese-based cathode materials

Electrolyte modification strategies adapted to Li-rich manganese-based cathode materials

Double carbon layer matrix synergistically improved the zinc-ion storage performance of manganese oxide

Aqueous zinc-ion batteries (AZIBs) have become a hot topic in study owing to their abundance of zinc resources, environmental friendliness, high capacity, and low cost. Nevertheless, the majority of cathode materials utilized in AZIBs frequently exhibit suboptimal electrical conductivity and structural instability, which restrict their application in energy storage. Here, a carbon-coated manganese oxide anchored on carbon skeleton (MnO–C@C) hybrid was synthesized using a simple and scalable method. The electrical conductivity of MnO can be enhanced by the double carbon layer. The presence of carbon skeleton effectively inhibits the agglomeration phenomenon of MnO and exposes more active sites. Meanwhile, the interaction force between the coated carbon and MnO effectively increases the structural stability of MnO. Taking advantage of the synergistic effect, the MnO–C@C hybrid shows an exceptional specific capacity of 409 mAh g−1 at 50 mA g−1 and outstanding cycling stability of 1000 cycles at 2000 mA g−1 (low decay rate of 0.0058 % per cycle). Besides, the reaction mechanisms are investigated via various characterizations. This work presents an inspired solution for developing manganese-based cathode materials in AZIBs.

High-capacity K+-pillared layered manganese dioxide as cathode material for high-rate aqueous zinc-ion battery

Sluggish kinetics and severe structural instability of manganese-based cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs) lead to low-rate capacity and poor cyclability, which hinder their practical applications. Pillaring manganese dioxide (MnO2) by pre-intercalation is an effective strategy to solve the above problems. However, increasing the pre-intercalation content to realize stable cycling of high capacity at large current densities is still challenging. Here, high-rate aqueous Zn2+ storage is realized by a high-capacity K+-pillared multi-nanochannel MnO2 cathode with 1 K per 4 Mn (δ-K0.25MnO2). The high content of the K+ pillar, in conjunction with the three-dimensional confinement effect and size effect, promotes the stability and electron transport of multi-nanochannel layered MnO2 in the ion insertion/removal process during cycling, accelerating and accommodating more Zn2+ diffusion. Multi-perspective in/ex-situ characterizations conclude that the energy storage mechanism is the Zn2+/H+ ions co-intercalating and phase transformation process. More specifically, the δ-K0.25MnO2 nanospheres cathode delivers an ultrahigh reversible capacity of 297 mAh g−1 at 1 A g−1 for 500 cycles, showing over 96 % utilization of the theoretical capacity of δ-MnO2. Even at 3 A g−1, it also delivered a 63 % utilization and 64 % capacity retention after 1000 cycles. This study introduces a highly efficient cathode material based on manganese oxide and a comprehensive analysis of its structural dynamics. These findings have the potential to improve energy storage capabilities in ZIBs significantly.

Cut-off voltage influencing the voltage decay of single crystal lithium-rich manganese-based cathode materials in lithium-ion batteries

The voltage decay of Li-rich layered oxide cathode materials results in the deterioration of cycling performance and continuous energy loss, which seriously hinders their application in the high-energy–density lithium-ion battery (LIB) market. However, the origin of the voltage decay mechanism remains controversial due to the complex influences of transition metal (TM) migration, oxygen release, indistinguishable surface/bulk reactions and the easy intra/inter-crystalline cracking during cycling. We investigated the direct cause of voltage decay in micrometer-scale single-crystal Li1.2Mn0.54Ni0.13Co0.13O2 (SC-LNCM) cathode materials by regulating the cut-off voltage. The redox of TM and O2− ions can be precisely controlled by setting different voltage windows, while the cracking can be restrained, and surface/bulk structural evaluation can be monitored because of the large single crystal size. The results show that the voltage decay of SC-LNCM is related to the combined effect of cation rearrangement and oxygen release. Maintaining the discharge cutoff voltage at 3 V or the charging cutoff voltage at 4.5 V effectively mitigates the voltage decay, which provides a solution for suppressing the voltage decay of Li-rich and Mn-based layered oxide cathode materials. Our work provides significant insights into the origin of the voltage decay mechanism and an easily achievable strategy to restrain the voltage decay for Li-rich and Mn-based cathode materials.

Mesoporous copper-doped δ-MnO2 superstructures to enable high-performance aqueous zinc-ion batteries

Aqueous zinc-ion batteries (AZIBs) are competitive alternatives for large-scale energy-storage devices owing to the abundance of zinc and low cost, high theoretical specific capacity, and high safety of these batteries. High-performance and stable cathode materials in AZIBs are the key to storing Zn2+. Manganese-based cathode materials have attracted considerable attention because of their abundance, low toxicity, low cost, and abundant valence states (Mn2+, Mn3+, Mn4+, and Mn7+). However, as a typical cathode material, birnessite-MnO2 (δ-MnO2) has low conductivity and structural instability. The crystal structure may undergo severe distortion, disorder, and structural damage, leading to severe cyclic instability. In addition, its energy-storage mechanism is still unclear, and most of the reported manganese oxide-based materials do not have excellent electrochemical performance. Herein, we propose a copper-doped Cu0.05K0.11Mn0.84O2·0.54H2O (Cu2-KMO) cathode, which exhibits a large interlayer spacing, a stable structure, and accelerated reaction kinetics. This cathode was prepared using a simple hydrothermal method. The AZIB assembled using Cu2-KMO showed high specific capacity (600 mA h g−1 at 0.1 A g−1 after 75 cycles). The dissolution-deposition energy storage mechanism of Cu-KMO in AZIBs with double electron transfer was revealed using ex situ tests. The good electrochemical performance of the Cu2-KMO cathode fabricated by the doping strategy in this study provides ideas for the subsequent preparation of manganese dioxide using other strategies.

Cation doping for enhanced layer spacing and electrochemical performance in Li-rich Mn-based lithium-ion cathode materials

Lithium-rich manganese-based cathode materials offer promising research avenues owing to their high capacity. This study delved into the impact of cation doping on Li1.2Ni0.13Co0.13Mn0.54O2(LNCMO). A range of layered Li1.2BXNi0.13Co0.13Mn0.54O2 (LNCMOxB, B = Ca, Na, Al) cathode materials were produced utilizing calcium, sodium, and aluminum chloride as dopants. Combining these elements with the lithium-rich materials improves the capacity retention of the positive electrode and mitigates voltage decay. X-ray diffraction analysis, Rietveld structural refinement, SEM, and XPS verified the inclusion of Ca, Na, and Al in the synthesized samples. Electrochemical analysis revealed that the LNCMO-0.01Na sample, possessing the largest dopant radius, exhibited favorable cyclic stability at 0.2C. Conversely, the LNCMO-0.01Al sample, featuring the smallest doped cation radius, demonstrated superior rate performance. Specifically, after 30 cycles at varying rates, the capacity reached 170 mAh·g−1 at 0.2C. The LNCMO-0.007Ca sample exhibited the highest residual capacity, maintaining 151.4 mAh·g−1 after 100 cycles at 0.2C. Doping Li sites in Li1.2Ni0.13Co0.13Mn0.54O2 materials with appropriately sized divalent cations significantly enhances their overall electrochemical performance. This enhancement is attributed to ion doping within the Li and TM layers, expediting the diffusion kinetics of Li ions, and augmenting ion and electronic conductivity. Investigating the doping modification of lithium-rich manganese-based oxide microspheres is instrumental in advancing positive electrode materials for lithium-ion batteries, aiming for increased specific capacity and more stable material structures.

Enhancing zinc-ion batteries: PEDOT-MnO2 cathodes for superior stability and capacity

Of late, zinc-ion batteries (ZIBs) are emerging as a vital component in sustainable energy storage, ensuring an environmentally friendly alternative to traditional battery systems. Herein, this study provides a novel approach to ZIB research, undertaking to encapsulate PEDOT in a layered MnO2 structure. Through the use of comprehensive analytical techniques, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and X-ray absorption spectroscopy (XAS), a detailed analysis of the enhanced PEDOT-MnO2 heterostructure is presented. Our research demonstrates that the encapsulation of PEDOT results in a substantial increase in initial discharge capacity (∼40%) compared to traditional MnO2 alongside improvements in structural stability. These findings, facilitated by in-situ X-ray absorption near-edge structure (XANES) and ex-situ extended X-ray absorption fine structure (EXAFS) techniques, underscore the potential of PEDOT-MnO2 in advancing the development of manganese-based cathode materials for non-aqueous electrolyte ZIBs. The work represents a crucial advancement in the field of sustainable energy storage solutions, highlighting the role of innovative material design in improving the efficiency and stability of rechargeable battery systems.