Management Of Bone Loss Research Articles

Management of peri-prosthetic joint infection and severe bone loss after total hip arthroplasty using a long-stemmed cemented custom-made articulating spacer (CUMARS)

BackgroundThere is little evidence on techniques for management of peri-prosthetic infection (PJI) in the context of severe proximal femoral bone loss. Custom-made articulating spacers (CUMARS) utilising cemented femoral stems as spacers was described providing better bone support and longer survival compared to conventional articulating spacers. We retrospectively report our experience managing PJI by adaptation of this technique using long cemented femoral stems where bone loss precludes use of standard stems.MethodsPatients undergoing 1st stage revision for infected primary and revision THA using a cemented long stem (> 205 mm) and standard all-polyethylene acetabulum between 2011 and 2018 were identified. After excluding other causes of revision (fractures or aseptic loosening), Twenty-one patients remained out of total 721 revisions. Medical records were assessed for demographics, initial microbiological and operative treatment, complications, eradication of infection and subsequent operations. 2nd stage revision was undertaken in the presence of pain or subsidence.ResultsTwenty-one patients underwent 1st stage revision with a cemented long femoral stem. Mean follow up was 3.9 years (range 1.7–7.2). Infection was eradicated in 15 (71.4%) patients. Two patients (9.5%) required repeat 1st stage and subsequently cleared their infection. Three patients (14.3%) had chronic infection and are on long term suppressive antibiotics. One patient (4.8%) was lost to follow up before 2 years. Complications occurred in seven patients (33%) during or after 1st stage revision. Where infection was cleared, 2nd stage revision was undertaken in 12 patients (76.5%) at average of 9 months post 1st stage. Five (23.8%) CUMARS constructs remained in-situ at an average of 3.8 years post-op (range 2.6–5.1).ConclusionsOur technique can be used in the most taxing of reconstructive scenarios allowing mobility, local antibiotic delivery, maintenance of leg length and preserves bone and soft tissue, factors not afforded by alternative spacer options.

Management of Bone Defects of the Foot and Ankle

Effective management of bone loss in foot and ankle surgery requires the application of a wide variety of techniques and implants. Autograft, allograft, cement spacers, bone transport, and recently custom titanium cages are all methods that can effectively manage bone defects. This article serves as an overview and technical guide for the indications and applications of these techniques with demonstrative case examples. Level of Evidence: Diagnostic Level V. See Instructions for Authors for a complete description of levels of evidence.

A pulse survey: assessment and management of bone loss in spinal cord injury.

An online survey OBJECTIVES: To describe current clinical practices regarding osteoporosis assessment and management in people with Spinal Cord Injury (SCI) and compare them to recommended diagnostic tests and interventions. An international collaboration surveying professionals working in SCI Medicine. Online cross-sectional survey regarding clinical practice trends in the assessment and treatment of osteoporosis in people with SCI. Assessment of whether discrete professional characteristics influenced practices and if those practices were consistent with recommendations from professional organizations. Eighty-two professionals working in SCI Medicine completed the survey. Respondents were equally likely to test for bone loss during the post-acute phase (between 4- and 18-months post injury) and after low impact fracture (41.46% and 42.68%, respectively) and more likely to test during the chronic phase (51.22%). The majority of respondents (n = 56, 70%) assessed bone density with DXA at the hip, and many (48.78%, n = 40) prescribed simultaneous mobilization, vitamin D and calcium to prevent bone loss in the acute, post-acute and chronic phases. A number of evaluations and interventions were inconsistent with best practice recommendations. Given that reported practices for detection and treatment of osteoporosis in SCI are inconsistent and not data-driven, there is need for dissemination and adoption of existing clinical practice guidelines.

Balance and constraint in revision TKR: A classification for instability management

Instability is an increasingly common cause and symptom of failure of Total Knee Arthroplasty (TKA). Patients seek ‘Functional Stability’, which is the sum of both a balanced joint and, if necessary, mechanical constraint. The objective of this paper is to classify the different types of TKA instability and their causes. Based on this classification, the authors give methodical recommendations for instability management. Instability classificationInstability in revision TKA can be classified into 3 types based on the management of bone loss and ligamentous deficiency which directs the level of constraint required to achieve functional stability. Type 1Bone deficiency: Revision with restoration of joint line and rebuilding the bony anatomy results in a balanced joint. No increased constraint is needed. Type 2Ligament and soft tissue deficiency: Requires increased constraint to overcome instability Type 3Composite (Total) deficiency: (combined Type 1 and 2).The multiple causes of instability are outlined for each Instability type along with an algorithm for restoring the joint line and adding titrated constraint to restore functional stability.

Ankle arthrodesis using the Taylor Spatial Frame for the treatment of infection, extruded talus and complex pilon fractures.

The treatment of complex pilon fractures and talus fracture-dislocations present several challenges, like avoiding infection, achieving union, management of bone loss and function preservation. Retrospective cohort review of fourteen patients who underwent ankle arthrodesis (AA) using the Taylor Spatial Frame (TSF) after pilon and talus fracture-dislocations. Ten tibiocalcaneal (TC) and four tibiotalar (TT) fusions were performed. Eleven of these cases were Gustilo III open fractures. Seven cases involved an open extruded talus. Four cases had established infections. There was a mean of 2.7 (range 0 - 8) operations prior to AA using TSF. The primary objective was to determine infection and union rates. Patient-reported outcomes (Short Form 36, SF-36) and functional outcomes (Ankle Osteoarthritis Score, AOS) were the secondary measures. Eradication and prevention of deep infection was achieved in all cases. Radiological union was achieved at a mean of 9 months (range 5 - 17). Solid AA was achieved in 12 of 14 cases using the TSF. Two TC fusions required a hindfoot fusion nail to achieve union. Eleven cases had concurrent bone transport, mean of 63mm (range 33 - 180). Mean time of TSF treatment was 11.1 months (range 6 - 16). One case required delayed amputation. Eight patients were able to fully weight bear unaided after the treatment. Mean SF-36 was 65 (range 35 -100). Mean AOS was 36.5 (range 6.6 - 77.5) with 69.3% of scores graded good to excellent. Mean total number of operations was 5.9 (range 2 - 10). Minimum follow up time was 12 months (range 12 - 56). AA using TSF can be considered for complex pilon fractures and extruded talus. It has shown to be effective in achieving a solid fusion and infection eradication. While using the TSF in isolation, non-union must be suspected in TC fusions, absence of radiological signs of healing, massive bone loss, and possibly not using bone graft. Patients must be aware that while treatment of these injuries will be prolonged and carries the risk of many potential complications, it provides a good alternative to amputation.

Direct and Indirect Effect of Honey as a Functional Food Against Metabolic Syndrome and Its Skeletal Complications.

Metabolic syndrome (MetS) refers to the simultaneous presence of hypertension, hyperglycemia, dyslipidemia and/or visceral obesity, which predisposes a person to cardiovascular diseases and diabetes. Evidence suggesting the presence of direct and indirect associations between MetS and osteoporosis is growing. Many studies have reported the beneficial effects of polyphenols in alleviating MetS in in vivo and in vitro models through their antioxidant and anti-inflammation actions. This review aims to summarize the effects of honey (based on unifloral and multi-floral nectar sources) on bone metabolism and each component of MetS. A literature search was performed using the PubMed and Scopus databases using specific search strings. Original studies related to components of MetS and bone, and the effects of honey on components of MetS and bone were included. Honey polyphenols could act synergistically in alleviating MetS by preventing oxidative damage and inflammation. Honey intake is shown to reduce blood glucose levels and prevent excessive weight gain. It also improves lipid metabolism by reducing total cholesterol, triglycerides and low-density lipoprotein, as well as increasing high-density lipoprotein. Honey can prevent bone loss by reducing the adverse effects of MetS on bone homeostasis, apart from its direct action on the skeletal system. In conclusion, honey supplementation could be integrated into the management of MetS and MetS-induced bone loss as a preventive and adjunct therapeutic agent.

An Evolution of Shoulder Periprosthetic Infections Management: MicroDTTect, Bioactive Glass and Tantalum Cones Employment.

Periprosthetic joint infections of the shoulder (PJIS) are the major cause for revision within the first two post-operative years, and are challenging both to diagnose and treat. Success depends on early identification of microorganisms, appropriate surgical procedures and efficient antibiotic administration. The peculiar microbiology of the shoulder may render the criteria for hip/knee PJI management inappropriate. In addition, later cases with clinically subtle signs often present diagnostic challenges. In recent years, specific issues of PJIS have been managed through the use of new instruments, such as MicroDTTect in pathogen detection and Bioactive Glass and tantalum cones in humeral bone loss. In the literature to date, no reports have been found that discuss the application in shoulder revisions and infections. The early identification of the microorganisms that cause infection may help improve both treatment strategies and the efficacy of therapy. MicroDTTect proved to be more efficient than swab collection for bacterial identification in orthopedic surgery, thus reducing analysis costs. The increasing number of shoulder arthroplasties is associated with an increase in the number of revisions. In cases of massive metaphyseal humeral bone loss, several techniques have been described; no reports have been reported regarding tantalum in humeral bone loss management. In some cases the tantalum cones required adaptation for femoral diaphysis in the augmentation of the humerus metaphysis and bone loss management improvement. Obtaining stable osseointegration of prosthetic implants is one of the greatest issues in orthopedic surgery, and even more crucial in revisions. Bioactive glasses demonstrated good regenerative and osseointegration properties, and an excellent candidate as a bone graft, scaffold and antibiotics deliverer. The Bioactive glasses were used to increase prosthesis-bone interface stability and fill bone defects in PJIS revision surgeries, contributing to the prevention of re-infection. Longer-term follow-up will be necessary to determine if construction durability is improved in the long term.

Surgical management of critical femoral bone loss by bone transport over intramedullary nail by monorail system: a case report

<p>Present case report is about a male patient who met with a road traffic accident sustained an open crush, contaminated, injury of lower end femur of right side with significant loss of lower thigh bone (8 cm). He had fracture of inter condylar femur with fracture upper end tibia and lower third tibia with impending vascular insufficiency of leg and foot. Operated after correction of anaemia by debridement, fixation of femur with plate and inter condylar screw. Upper end tibia and Lower half tibia were fixed with separate plates and fasciotomy of leg. After 2 months femoral plate was replaced with intramedullary locking nail and superadded with monorail fixator. Corticotomy at proximal femur for bone transportation. Bone gap was corrected within 4 months and bone grafting was done at distal docking site. Union achieved and fixator removed after 4 months of this. Patient showed good results till last follow up 28 months, having good range of motion of knee.so critical bone loss at femur was treated by distraction osteogenesis over intramedullary nail with monorail external fixator system.</p>

METAPHYSEAL TRITANIUM CONES IN rTKA: EFFECTS OF VARYING DEFECTS AND THE ROLE OF STEMS

Background: Clinical studies have shown that metaphyseal tritanium cones are an acceptable choice to manage bone loss at rTKA. However, their performance in knees with varying defect sizes and locations has not been previously examined.

Cup-on-cup technique: a reliable management solution for severe acetabular bone loss in revision total hip replacement.

The management of acetabular bone loss is a challenging problem in revision total hip arthroplasty (rTHA). The goals of treatment are a stable acetabular fixation, implant stability, and restoration of hip centre of rotation.This study aims to report clinical, radiological outcomes and complications at short-term to mid-term follow-up of the cup-on-cup technique in the management of severe acetabular bone loss in rTHA. We retrospectively reviewed the records of patient receiving rTHA performed with double porous tantalum cup technique in a single Joint Replacement Unit from 2014 to 2017. Objective and subjective clinical scores (Harris Hip Score, Oxford Hip Score, and visual analogue scale), radiological parameters (centre of rotation, leg-length discrepancy, heterotopic ossification, osseointegration, loosening and radiolucencies) and complications were recorded. We analysed the implant survival rate and periprosthetic joint infection rate. We included 9 patients (9 hips) with a mean follow-up of 35.3 ± 10.8 months. Functional scores showed a statistically significant improvement at the final follow-up (p < 0.01). All patients rated their surgery as satisfactory. The cup-on-cup construct demonstrated radiological osseointegration with the centre of rotation restoration and leg length discrepancy improvement. In 1 patient, periprosthetic joint infection was diagnosed and treated with suppressive antibiotic therapy. No patients underwent acetabular components revision surgery for any reason. Cup-on-cup technique is a valid and safe solution for reconstruction of selected Paprosky type IIIA and IIIB bone defects with satisfactory clinical and radiographic results at short-term and mid-term follow-up.

Guidance for the assessment and management of prostate cancer treatment-induced bone loss. A consensus position statement from an expert group

Context and objectiveIncidence of prostate cancer (PC) is increasing, but androgen deprivation therapy (ADT) and other therapies are substantially improving survival. In this context, careful consideration of skeletal health is required to reduce the risk of treatment-related fragility fractures and their associated morbidity and mortality. This risk is currently not well-managed. ADT causes significant loss of bone mineral density (BMD). In the metastatic setting, systemic treatments (e.g. chemotherapy, abiraterone, enzalutamide) are used alongside ADT and may require concomitant glucocorticoids. Both ADT and glucocorticoids pose significant challenges to skeletal health in a population of patients already likely to have ongoing age-related bone loss and/or comorbid conditions. Current PC guidelines lack specific recommendations for optimising bone health. This guidance presents evidence for assessment and management of bone health in this population, with specific recommendations for clinical practitioners in day-to-day PC management. MethodsStructured meetings of key opinion leaders were integrated with a systematic literature review. Input and endorsement was sought from patients, nursing representatives and specialist societies. Summary of guidanceAll men starting or continuing long-term ADT should receive lifestyle advice regarding bone health. Calcium/vitamin D supplementation should be offered if required. Fracture risk should be calculated (using the FRAX® tool), with BMD assessment included where feasible. BMD should always be assessed where fracture risk calculated using FRAX® alone is close to the intervention threshold. Intervention should be provided if indicated by local or national guidelines e.g. UK National Osteoporosis Guideline Group (NOGG) thresholds. Men requiring bone protection therapy should be further assessed (e.g. renal function), with referral to specialist centres if available and offered appropriate treatment to reduce fracture risk. Those near to, but below an intervention threshold, and patients going on to additional systemic therapies (particularly those requiring glucocorticoids), should have FRAX® (including BMD) repeated after 12–18 months. Patient summaryModern treatments for prostate cancer have led to significant improvements in survival and quality of life. However, some of these treatments may lead to weakening of patient’s bones with risk of fracture and it is therefore important to monitor patients’ bone health and provide bone protection where needed. This paper provides specific guidance to clinical teams, based on the most recent research evidence, to ensure optimal bone health in their patients.

Management of the bone loss by metaphyseal sleeves in primary and revision knee arthroplasty: clinical experience and outcome after forty three cases.

Management of metaphyseal bone loss in complex primary and revision TKA is a challenge for surgeons. Out of various types of bony defects, large metaphyseal bone loss (AORI types IIB and III) requires special augments in the form of cones or sleeves. The aim of this study is to assess the reliability of metaphyseal sleeves, in dealing with massive bone defects to provide stability for immediate weight bearing and also to check short to mid-term survivorship of metaphyseal sleeves in Asian population by assessing various parameters and complications. This is a retrospective study that includes 36 patients (43 knees), operated from 2011 to 2019. Patients with AORI type IIB (large metaphyseal bone defect) and AORI type III (metaphyseal defect with compromised collateral ligaments) were included. We included both the primary and revision knee arthroplasties in our study. Our interest in this study was to look for incidence of intra-operative iatrogenic fracture on the one hand, and post-operative complications in the form of peri-prosthetic joint infection and aseptic loosening on the other hand. Knee Society Score (KSS) was used to assess improvement in patient's clinical outcome. SPSS version 23 was used to process data. The average age of patients in our study was 59.4 (SD 9.78) years. Male to female ratio was 21:15. The average follow-up was 5.42 (SD 2.24) years with the longest follow up of nineyears. Metaphyseal sleeves were used in 12 primary TKA and 31 revision TKA. During surgery, iatrogenic fracture of tibial condyle was encountered in three patients (6.9%), all were managed without any intervention and union was achieved in all cases. There was not a single case with aseptic loosening as per radiological criteria in our study. Peri-prosthetic joint infection (PJI) was encountered in a single case (2.3%). Pre-op Knee Society Score (KSS) was 36.21 (SD 7.43) where as it improved to 92.00 (SD 5.66),sixmonths after surgery. Also the range of flexion was increased from 76.83o (SD 14.07o) to 122.91o (SD 4.84o). In our study, metaphyseal sleeves showed excellent short to mid-term survivorship in AORI types IIB and III boneloss in Asian population. These results are comparable to various studies conducted on North American and European population. Metaphyseal sleeve is a reliable tool in the armamentarium ofthe arthroplasty surgeon. It is user friendly implant and provides immediate stability to allow full weight-bearing mobilization.

The extract of Trachelospermum jasminoides (Lindl.) Lem. vines inhibits osteoclast differentiation through the NF-κB, MAPK and AKT signaling pathways

Osteoclasts are the only cells in the body with a bone-resorption function. The identification of anti-osteoclastogenic agents is important in managing bone loss diseases. The dried vines of Trachelospermum jasminoides (Lindl.) Lem. have been used as a herbal medicine to treat musculoskeletal soreness in East Asia for hundreds of years. In the present study, we focused on the effect of Trachelospermum jasminoides (Lindl.) Lem. extract (TJE) on osteoclast differentiation. As indicated by tartrate-resistant acid phosphatase (TRAP) staining, TJE inhibited osteoclastogenesis induced by receptor activator of nuclear factor-κB ligand from bone marrow-derived monocytes/macrophages without showing any cytotoxicity. In addition, TJE effectively suppressed F-actin ring formation and the bone-resorption function of osteoclasts. The subsequent studies such as network pharmacology and molecular investigation, revealed that TJE inhibited osteoclastogenesis-related genes in a dose- and time-dependent manner through NF-κB, MAPK and AKT-mediated mechanism followed by the nuclear factor of activated T cells, cytoplasmic 1 (NFATc1)/c-Fos pathway. Our study could potentially explain the underlying molecular pharmacology of TJE in osteoclast-related diseases. What’s more, it suggested that network pharmacology could help the modernization of traditional Chinese medicine.

Management of bone loss in recurrent traumatic anterior shoulder instability: a survey of North American surgeons

BackgroundManagement of bone loss in recurrent traumatic anterior shoulder instability remains a topic of debate and controversy in the orthopedic community. The purpose of this study was to survey members of 4 North American orthopedic surgeon associations to assess management trends for bone loss in recurrent anterior shoulder instability. MethodsAn online survey was distributed to all members of the American Shoulder and Elbow Surgeons, American Orthopaedic Society for Sports Medicine, and Canadian Orthopaedic Association and to fellow members of the Arthroscopy Association of North America. The survey comprised 3 sections assessing the demographic characteristics of survey respondents, the influence of prognostic factors on surgical decision making, and the operative management of 12 clinical case scenarios of varying bone loss that may be encountered in clinical practice. ResultsA total of 150 survey responses were returned. The age of the patient and quantity of bone loss were consistently considered important prognostic criteria. However, little consensus was reached for critical thresholds of bone loss and how this affected the timing (ie, primary or revision surgery) and type of bony augmentation procedure to be performed once a critical threshold was reached, especially in the context of critical humeral and bipolar bone loss. ConclusionsConsistent trends were found for the management of recurrent anterior shoulder instability in cases in which no bone loss existed and when isolated critical glenoid bone loss was present. However, inconsistencies were observed when isolated critical humeral bone loss and bipolar bone loss were present.

The ‘apple core’ cement spacer for the management of massive bone loss in two-stage revision knee arthroplasty for infection

Antibiotic-loaded cement spacers are used in two-stage revision knee arthroplasty for infection, but commercially available spacers may not always be suitable for significant bone loss or soft tissue failure in multiply revised cases. We describe a technique for producing an on-table, static, reinforced cement spacer – the ‘apple core’ spacer – with the intended outcome of providing joint stability in such patients, prior to undertaking a second-stage procedure. Following a radical debridement, the spacer is made of three components: (1) a ‘central bar’ of external fixator connecting rods, combined using cerclage wires as needed; (2) a standard polymethylmethacrylate cement ‘apple core’; and (3) a covering ‘skin’ of high dose antibiotic-loaded cement, which is stippled as it sets, to increase the surface area and facilitate antibiotic elution. This technique was performed in nine patients who underwent two-stage salvage revision for complex, recurrent infected total knee arthroplasty at a single institution. All patients successfully went on to definitive second-stage reimplantation and have retained their limbs. The ‘apple core’ cement spacer allows massive bone defects to be effectively managed between staged revision procedures.

Alternative Management Of Bone Defect In Primary Total Knee Replacement

Introduction:Bone defects are not common in primary total knee arthroplasty (TKA) contrary to a revision setting. The surgeon must assess the degree of complexity preoperatively and intraoperatively and have a broad armamentarium available during surgery. Multiple surgical options are available to repair or reconstruct the loss of bone, these include: bone cement, bone grafts, metal augments and custom-made implants. Principles to consider in bone loss management are knee and patient-related. Bone defects in primary TKA are usually associated malalignment of the limb combined with severe destruction of the articular cartilage. The treatment options for bone defects in primary TKA should be focus on preserving of the host bone, joint line restoration, balancing the flexion /extension stability and stabilizing the prosthesis.Materials/Methods:We are presenting a 65 years old lady with severe osteoarthritis bilateral varus deformity with severe bone loss over the posterior tibia condyle. Pre operatively multiple radiographs AP, lateral, patella skyline and oblique view are taken. For this patien we taken CT scan for assessment of the bone defect particularly on the tabia side. The pre operative templating of the radiographs is fundamental important in this patient in planning for primary complex TKA . This patient underwent bilateral total knee replacement with semiconstraint implant with mesh and impaction bone grafting over the posterior apesct of proximal tibia.Result:This patient was susseccfully operated with no immediate and post operative complication. Patient which unable to walk because of severe deformity able to gain confidence level to walk and back to her daily living activityDiscussion:Primary and revision TKA will continue to increase, proper management of femoral and tibia bone loss represents a common situation that have to be faced by the orthopaedic surgeon. Whatever technique is used in management of bone loss during knee arthroplasty, certain fundamentals must be applied and the remaining bone structure will guide treatment. For this case the bone defect was severe uncontained less than 50% of the posterior proximal was lost. Impaction grafting with mesh was performed to create back the proximal tibia. It’s give a new solid platform for the tibia tray to be inserted and this may allow the patient to weight bear immediately post operatively. This will avoid from using fully constrain implant which put more stress on the joint. Periarticular defect requiring more than a minimal prosthetic augment, it is imperative to use stemmed components to transfer stress away from join. Reestablishment of well-aligned and stable implants is necessary, but this can’t be accomplished without a sufficient restoration of an eventual bone lossConclusion:There are several treatment options to deal with a specific bone defect in the primary TKA and these options will be dictated by the patient’s factors, the defect factors and surgeon experience. Careful preoperative planning is essential to ensure successful reconstruction with all the appropriate armamentarium prepared.

A finite element analysis of tibial tritanium cones without stems in varying bone defects

BackgroundIn the UK around 10% of hip and knee arthroplasties are revision operations. At revision total knee arthroplasty (rTKA), bone loss management is critical to achieving a stable bone-implant construct. Though tritanium cones have been used to manage bone defects in rTKA, their biomechanical performance with varying defects remains unknown. MethodsUncontained tibial bone defects at four anatomic locations, with varying depths and widths (Type T2A and T2B) were investigated computationally in a composite tibia which was subjected to four loading scenarios. The ability of the tritanium cone to replace the tibial bone defect was examined using the outcome measures of bone strain distribution and interface micromotions. ResultsIt was found that anterior and lateral defects do not significantly alter the strain distribution compared with intact bone. For medial defects, strain distribution is sensitive to defect width; while strain distributions for posterior defects are associated with defect width and depth. In general, micromotions at the bone-implant interface are small and are primarily influenced by defect depth. ConclusionsOur models show that the cone is an acceptable choice for bone defect management in rTKA. Since all observed micromotions were small, successful osteointegration would be expected in all types of uncontained defects considered in this study. Tritanium cones safely accommodate uncontained tibial defects up to 10 mm deep and extending up to 9 mm from the centre of the cone. Medial and posteriorly based defects managed with symmetric cones display the greatest bone strains and asymmetric cones may be useful in this context.

Use of Biomaterials for Periodontal Regeneration: A Review

BACKGROUND: Management of bone periodontal defects, destruction, and loss of the alveolar bone is considered a challenge for modern periodontal regeneration and implant dentistry. Numerous of biomaterials are being used in periodontal regenerative treatment.&#x0D; AIM: This study aims to know the characteristics of biomaterials and their efficiency in periodontal surgical treatment as regenerative therapy.&#x0D; METHODS: A systematic review of the literature considering reviews, clinical studies, original papers, and articles from electronic data has been used.&#x0D; RESULTS: Different biomaterials such as Straumann® Emdogain®, Geistlich Bio-Oss®, MIS 4MATRIX – Bone Graft, Platelet-rich fibrin (PRF), Mis Bone-4MATRIX, and PRF are being used for periodontal regeneration treatment, hence revealing more effective outcomes when combined. PRP together with conventional grafting procedures may be a beneficial treatment approach, guided tissue regeneration with bioabsorbable membranes in combination with Bio-Oss are stable on a long-term basis.&#x0D; CONCLUSION: Biomaterials being used in periodontal surgical treatment have the different regenerative ability. The combined use of biomaterials might result in a better clinical outcome. There are also a number of other biomaterials used to treat periodontal regeneration, but generally all have the same ability and the same molecular structure as highlighted in this literature review.

Traumatic Composite Bone and Soft Tissue Loss of the Leg: Region-Specific Classification and Treatment Algorithm

The management of traumatic composite bone and soft tissue loss (TCBSTL) requires a classification system and decision-making algorithm for the purpose of description, prognosis and choice of treatment method. between the year 2000 and 2017 a series of 254 cases of TCBSTL were treated using distraction histogenesis and external fixation techniques. The tissue loss was due to either the initial injury or debridement of infection. Adjunctive procedures included split thickness skin grafting and ICBG when indicated. A classification system was designed by the author. The classification is based on factors that influence management and prognosis; (1) stability of the host bone (intact tibia or a well-fixed fracture), (2) presence or absence of infection in the fracture site, (3) size of bone defect, and (4) contamination (infection) of the medullary cavity. A flowchart and decision-making algorithm was subsequently developed. Ilizarov external fixator was used in all cases. Ten cases (4%) had combined Masquelet - Ilizarov technique. One hundred seventy five cases (68.9%) had gradual distraction-compression (GDC) technique; while 79 cases (31.1%) had acute shortening and re-lengthening (ASRL) technique. Seventy-two cases (28.3%) had autogenous iliac crest bone graft (ICBG). All cases (100%) had complete clinical and radiological fracture union. All patients completed the follow up that ranged from 24 to 118 months (mean 43.3 ± 23). The results were satisfactory in 212 cases (83.5%) and unsatisfactory in 42 (16.5%) cases due to residual leg length discrepancy, joint stiffness, and persistent pain. the proposed classification is simple, applicable, recallable and includes most scenarios of reconstructable TCBSTL. The classification provides a basis for communication, description and evaluation of such cases. The algorithm, based on our classification, provides a guideline for management without over/under treatment.

The Role of Poly(Methyl Methacrylate) in Management of Bone Loss and Infection in Revision Total Knee Arthroplasty: A Review.

Poly(methyl methacrylate) (PMMA) is widely used in joint arthroplasty to secure an implant to the host bone. Complications including fracture, bone loss and infection might cause failure of total knee arthroplasty (TKA), resulting in the need for revision total knee arthroplasty (rTKA). The goals of this paper are: (1) to identify the most common complications, outside of sepsis, arising from the application of PMMA following rTKA, (2) to discuss the current applications and drawbacks of employing PMMA in managing bone loss, (3) to review the role of PMMA in addressing bone infection following complications in rTKA. Papers published between 1970 to 2018 have been considered through searching in Springer, Google Scholar, IEEE Xplore, Engineering village, PubMed and weblinks. This review considers the use of PMMA as both a bone void filler and as a spacer material in two-stage revision. To manage bone loss, PMMA is widely used to fill peripheral bone defects whose depth is less than 5 mm and covers less than 50% of the bone surface. Treatment of bone infections with PMMA is mainly for two-stage rTKA where antibiotic-loaded PMMA is inserted as a spacer. This review also shows that using antibiotic-loaded PMMA might cause complications such as toxicity to surrounding tissue, incomplete antibiotic agent release from the PMMA, roughness and bacterial colonization on the surface of PMMA. Although PMMA is the only commercial bone cement used in rTKA, there are concerns associated with using PMMA following rTKA. More research and clinical studies are needed to address these complications.