Maltose-binding Protein Research Articles

Pseudomonas aeruginosa polysaccharide Psl supports airway microbial community development

Pseudomonas aeruginosa dominates the complex polymicrobial cystic fibrosis (CF) airway and is a leading cause of death in persons with CF. Oral streptococcal colonization has been associated with stable CF lung function. However, no studies have demonstrated how Streptococcus salivarius, the most abundant streptococcal species found in individuals with stable CF lung disease, potentially improves lung function or becomes incorporated into the CF airway biofilm. By utilizing a two-species biofilm model to probe interactions between S. salivarius and P. aeruginosa, we discovered that the P. aeruginosa exopolysaccharide Psl promoted S. salivarius biofilm formation. Further, we identified a S. salivarius maltose-binding protein (MalE) that is required for promotion of biofilm formation both in vitro and in a Drosophila melanogaster co-infection model. Finally, we demonstrate that promotion of dual biofilm formation with S. salivarius is common among environmental and clinical P. aeruginosa isolates. Overall, our data supports a model in which S. salivarius uses a sugar-binding protein to interact with P. aeruginosa exopolysaccharide, which may be a strategy by which S. salivarius establishes itself within the CF airway microbial community.

An Intrinsically Disordered Peptide Tag that Confers an Unusual Solubility to Aggregation-Prone Proteins

There is a high demand for the production of recombinant proteins in Escherichia coli for biotechnological applications, but their production is still limited by their insolubility. Fusion tags have been successfully used to enhance the solubility of aggregation-prone proteins; however, smaller and more powerful tags are desired for increasing the yield and quality of target proteins. Here, the NEXT tag, a 53-amino-acid-long solubility enhancer, is described. The NEXT tag showed outstanding ability to improve both in vivo and in vitro solubilities, with minimal effect on passenger proteins. The C-terminal region of the tag was mostly responsible for in vitro solubility, while the N-terminal region was essential for in vivo soluble expression. The NEXT tag appeared to be intrinsically disordered and seemed to exclude neighboring molecules and prevent protein aggregation by acting as an entropic bristle. This novel peptide tag should have general use as a fusion partner to increase the yield and quality of difficult-to-express proteins. IMPORTANCE Production of recombinant proteins in Escherichia coli still suffers from the insolubility problem. Conventional solubility enhancers with large sizes, represented by maltose-binding protein (MBP), have remained the first-choice tags; however, the success of the soluble expression of tagged proteins is largely unpredictable. In addition, the large tags can negatively affect the function of target proteins. In this work, the NEXT tag, an intrinsically disordered peptide, was introduced as a small but powerful alternative to MBP. The NEXT tag could significantly improve both the expression level and the solubility of target proteins, including a thermostable carbonic anhydrase and a polyethylene terephthalate (PET)-degrading enzyme that are remarkable enzymes for environmental bioremediation.

Multi-parameter photon-by-photon hidden Markov modeling

Single molecule Förster resonance energy transfer (smFRET) is a unique biophysical approach for studying conformational dynamics in biomacromolecules. Photon-by-photon hidden Markov modeling (H2MM) is an analysis tool that can quantify FRET dynamics of single biomolecules, even if they occur on the sub-millisecond timescale. However, dye photophysical transitions intertwined with FRET dynamics may cause artifacts. Here, we introduce multi-parameter H2MM (mpH2MM), which assists in identifying FRET dynamics based on simultaneous observation of multiple experimentally-derived parameters. We show the importance of using mpH2MM to decouple FRET dynamics caused by conformational changes from photophysical transitions in confocal-based smFRET measurements of a DNA hairpin, the maltose binding protein, MalE, and the type-III secretion system effector, YopO, from Yersinia species, all exhibiting conformational dynamics ranging from the sub-second to microsecond timescales. Overall, we show that using mpH2MM facilitates the identification and quantification of biomolecular sub-populations and their origin.

Monoclonal antibodies against the newly identified allergen β-enolase from common carp (Cyprinus carpio)

ABSTRACT β-enolase is a heat-labile fish allergen identified in different fish species. In this study, β-enolase gene was cloned from common carp muscle tissue and the target protein was expressed as a fusion with maltose binding protein (MBP-Eno) in E. coli. Recombinant MBP-Eno was reactive with blood serum specimens of fish-allergic patients, confirming that β-enolase is a newly identified allergen of common carp. Two monoclonal antibodies (MAbs) against recombinant β-enolase were generated that showed cross-reactivity with β-enolases of other organisms. Both antibodies recognized β-enolases from other fish species extracts, while MAb 6E4 showed a broad reactivity with pork, chicken, yeast, and E. coli samples. Epitope mapping using MBP-Eno variants revealed that β-enolase region comprising amino acids 623–698 presumably includes MAb 6E4 epitope. The generated broadly reactive MAb 6E4 directed against a conserved epitope of β-enolases may represent a valuable tool for the characterization of allergen extracts and fish allergy diagnostics.

Cryo-EM, Protein Engineering, and Simulation Enable the Development of Peptide Therapeutics against Acute Myeloid Leukemia.

Cryogenic electron microscopy (cryo-EM) has emerged as a viable structural tool for molecular therapeutics development against human diseases. However, it remains a challenge to determine structures of proteins that are flexible and smaller than 30 kDa. The 11 kDa KIX domain of CREB-binding protein (CBP), a potential therapeutic target for acute myeloid leukemia and other cancers, is a protein which has defied structure-based inhibitor design. Here, we develop an experimental approach to overcome the size limitation by engineering a protein double-shell to sandwich the KIX domain between apoferritin as the inner shell and maltose-binding protein as the outer shell. To assist homogeneous orientations of the target, disulfide bonds are introduced at the target–apoferritin interface, resulting in a cryo-EM structure at 2.6 Å resolution. We used molecular dynamics simulations to design peptides that block the interaction of the KIX domain of CBP with the intrinsically disordered pKID domain of CREB. The double-shell design allows for fluorescence polarization assays confirming the binding between the KIX domain in the double-shell and these interacting peptides. Further cryo-EM analysis reveals a helix–helix interaction between a single KIX helix and the best peptide, providing a possible strategy for developments of next-generation inhibitors.

Tetrahymena thermophila granule lattice protein 3 improves solubility of sexual stage malaria antigens expressed in Escherichia coli

The requirement for low cost manufacturing makes bacterial cells a logical platform for the production of recombinant subunit vaccines for malaria. However, protein solubility has been a major stumbling block with prokaryotic expression systems. Notable examples include the transmission blocking vaccine candidates, Pfs25 and Pfs48/45, which are almost entirely insoluble when expressed as recombinant proteins in Escherichia coli. Various solubility tags have been used with limited success in improving solubility, although recent studies with granule lattice protein 1 (Grl1p) from the ciliated protozoan, Tetrahymena thermophila, have shown promise. Here, we examine a related solubility tag, granule lattice protein 3 (Grl3p) from T. thermophila, and compare it to both Grl1p and the well-studied maltose binding protein (MBP) used to improve the solubility of multiple protein targets. We find that Grl3p performs comparably to Grl1p when linked to Pfs25 but significantly improves solubility when paired with Pfs48/45.

First enzymological characterization of selenocysteine β-lyase from a lactic acid bacterium, Leuconostoc mesenteroides.

We succeeded in expressing selenocysteine β-lyase (SCL) from a lactic acid bacterium, Leuconostoc mesenteroides LK-151 (Lm-SCL), in the soluble fractions of Escherichia coli Rosetta (DE3) using a novel expression vector of pET21malb constructed by ourselves that has both maltose binding protein (MBP)- and 6 × His-tag. Lm-SCL acted on L-selenocysteine, L-cysteine, and L-cysteine sulfinic acid but showed a high preference for L-selenocysteine. The kcat and kcat/Km values of Lm-SCL were determined to be 108 (min-1) and 42.0 (min-1・mM-1), respectively, and this was enough catalytic efficiency to suggest that Lm-SCL might also be involved in supplying elemental selenium from L-selenocysteine to selenoproteins like other SCLs. The optimum temperature and optimum pH of Lm-SCL were determined to be 37°C and pH 6.5, respectively. Lm-SCL was stable at 37-45°C and pH 6.5-7.5. Lm-SCL was completely inhibited by the addition of hydroxylamine, semicarbazide, and iodoacetic acid. The enzyme activity of Lm-SCL was decreased in the presence of various metal ions, especially Cu2+. The quaternary structure of Lm-SCL is a homodimer with a subunit molecular mass of 47.5kDa. The similarity of the primary structure of Lm-SCL to other SCLs from Citrobacter freundii, Escherichia coli, humans, or mouse was calculated to be 47.0, 48.0, 12.5, or 24.0%, respectively. Unlike Ec-SCL, our mutational and molecular docking simulation studies revealed that C362 of Lm-SCL might also catalyze the deselenation of L-selenocysteine in addition to the desulfuration of L-cysteine.

Peptide ligand interaction with maltose-binding protein tagged to the calcitonin gene-related peptide receptor: The inhibitory role of receptor N-glycosylation

Calcitonin gene-related peptide (CGRP) and adrenomedullin (AM) are peptide hormones and their receptors play a critical role in migraine progression and blood pressure control, respectively. CGRP and AM receptors are structurally related since they are the complex of the calcitonin receptor-like receptor (CLR) with the different types of receptor activity-modifying protein (RAMP). Several crystal structures of the CGRP and AM receptor extracellular domain (ECD) used maltose-binding protein (MBP) as a tag protein to facilitate crystallization. Unexpectedly, the recent crystal structures of CGRP receptor ECD showed that the N-terminal tag MBP located in proximity of bound/mutated peptide ligands. This study provided evidence that MBP N-terminally tagged to the CGRP receptor ECD formed chemical interaction with the mutated peptide ligands. Interestingly, N-glycosylation of the CGRP receptor ECD was predicted to prevent MBP docking to the mutated peptide ligands. I found that the N-glycosylation of CLR ECD N123 was the most critical for inhibiting MBP interaction with the mutated peptide ligands. The MBP tag protein interaction was also dependent on the sequence of the peptide ligands. In contrast to the CGRP receptor, the MBP tag was not involved in peptide ligand binding at AM receptor ECD. Here, I provided evidence that N-glycosylation of the CGRP receptor ECD inhibited the tag protein interaction suggesting an additional function of N-glycosylation in the MBP-fused CGRP receptor ECD. This study reveals the importance of using tag protein-free versions of the CGRP receptor for the accurate assessment of peptide binding affinity.

Microreactor equipped with naturally acid-resistant histidine ammonia lyase from an extremophile.

Extremophile enzymes are useful in biotechnology and biomedicine due to their abilities to withstand harsh environments. The abilities of histidine ammonia lyases from different extremophiles to preserve their catalytic activities after exposure to acid were assessed. Thermoplasma acidophilum histidine ammonia lyase was identified as an enzyme with a promising catalytic profile following acid treatment. The fusion of this enzyme with the maltose-binding protein or co-incubation with the chaperone HdeA further helped Thermoplasma acidophilum histidine ammonia lyase to withstand acid treatments down to pH 2.8. The assembly of a microreactor by encapsulation of MBP-Thermoplasma acidophilum histidine ammonia lyase into a photocrosslinked poly(vinyl alcohol) hydrogel allowed the enzyme to recover over 50% of its enzymatic activity following exposure to simulated gastric and intestinal fluids. Our results show that using engineered proteins obtained from extremophiles in combination with polymer-based encapsulation can advance the oral formulations of biologicals.

Purity of maltose-binding protein - Recombinant streptavidin expressed in Escherichia coli BL21 (pD861-MBP: 327892).

Nearly 95% of streptavidin which is expressed in Escherichia coli found as an inclusion body. Protein expressed in an inclusion body form requires further steps for the folding process related to its purification. Whereas the purity level of the recombinant streptavidin is very crucial mainly for the specification test in diagnostic system. In this study, we designed synthetic gene of streptavidin to be fused with maltose-binding protein (MBP) gene to enhance its solubility when expressed in E. coli BL21 (pD861-MBP: 327892) and purified using amylose resin with gradient column buffer. Based on the SDS-PAGE characterization, the majority of recombinant streptavidin was found in soluble than that of insoluble form. Recombinant streptavidin was found at its suitable size at 56.6 kDa in the soluble protein fraction with a concentration of 537.42 mg/L. The purest fraction of streptavidin recombinant was obtained at the 58th fraction in a concentration of 0.86 mg/L with purity level of 98.77%. Compared to the initial crude protein extract, the level of purity is lower, 6.03%. In summary, the MBP purification method improves the purity level and enhances the solubility of the recombinant streptavidin.

Determination of dissociation constants of protein ligands by thermal shift assay

The thermal shift assay (TSA) is a powerful tool used to detect molecular interactions between proteins and ligands. Using temperature as a physical denaturant and an extrinsic fluorescent dye, the TSA tracks protein unfolding. This method precisely determines the midpoint of the unfolding transition (Tm), which can shift upon the addition of a ligand. Though experimental protocols have been well developed, the thermal shift assay data traditionally yielded qualitative results. Quantitative methods for Kd determination relied either on empirical and inaccurate usage of Tm or on isothermal approaches, which do not take full advantage of the melting point precision provided by the TSA. We present a new analysis method based on a model that relies on the equilibrium system between the native and molten globule state of the protein using the van't Hoff equation. We propose the Kd can be determined by plotting Tm values versus the logarithm of ligand concentrations and fitting the data to an equation we derived. After testing this procedure with the monomeric maltose-binding protein and an allosterically regulated homotetrameric enzyme (ADP-glucose pyrophosphorylase), we observed that binding results correlated very well with previously established parameters. We demonstrate how this method could potentially offer a broad applicability to a wide range of protein classes and the ability to detect both active and allosteric site binding compounds.

Amphiphilic proteins coassemble into multiphasic condensates and act as biomolecular surfactants

Cells contain membraneless compartments that assemble due to liquid-liquid phase separation, including biomolecular condensates with complex morphologies. For instance, certain condensates are surrounded by a film of distinct composition, such as Ape1 condensates coated by a layer of Atg19, required for selective autophagy in yeast. Other condensates are multiphasic, with nested liquid phases of distinct compositions and functions, such as in the case of ribosome biogenesis in the nucleolus. The size and structure of such condensates must be regulated for proper biological function. We leveraged a bioinspired approach to discover how amphiphilic, surfactant-like proteins may contribute to the structure and size regulation of biomolecular condensates. We designed and examined families of amphiphilic proteins comprising one phase-separating domain and one non-phase-separating domain. In particular, these proteins contain the soluble structured domain glutathione S-transferase (GST) or maltose binding protein (MBP), fused to the intrinsically disordered RGG domain from P granule protein LAF-1. When one amphiphilic protein is mixed invitro with RGG-RGG, the proteins assemble into enveloped condensates, with RGG-RGG at the core and the amphiphilic protein forming the surface film layer. Importantly, we found that MBP-based amphiphiles are surfactants and influence droplet size, with increasing surfactant concentration resulting in smaller droplet radii. In contrast, GST-based amphiphiles at increased concentrations coassemble with RGG-RGG into multiphasic structures. We propose a mechanism for these experimental observations, supported by molecular simulations of a minimalist model. We speculate that surfactant proteins may play a significant role in regulating the structure and function of biomolecular condensates.

One-pot multienzyme (OPME) chemoenzymatic synthesis of brain ganglioside glycans with human ST3GAL II expressed in E. coli.

A human sialyltransferase ST3GAL II (hST3GAL II) was successfully expressed in Escherichia coli as an active soluble fusion protein with an N-terminal maltose-binding protein (MBP) and a C-terminal hexa-histidine tag. It was used as an efficient catalyst in a one-pot multienzyme (OPME) sialylation system for high-yield production of the glycans of ganglioside GM1b and highly sialylated brain gangliosides GD1a and GT1b. Further sialylation of GM1b and GD1a glycans using a bacterial α2-8-sialyltransferase in another OPME sialylation reaction led to the formation of the glycans of GD1c and brain ganglioside GT1a, respectively. The lower reverse glycosylation activity of the recombinant hST3GAL II compared to its bacterial sialyltransferase counterpart simplifies the handling of enzymatic synthetic reactions and has an advantage for future use in automated chemoenzymatic synthetic processes.

The lysine at position 151 of the duck hepatitis A virus 1 2C protein is critical for its NTPase activities

The duck hepatitis A virus 1 (DHAV-1) 2C protein was predicted to be a superfamily III helicase member and includes nucleotide binding (NTB) and putative RNA helicase activity motifs. To study whether DHAV-1 2C protein has NTB activity, we expressed DHAV-1 2C protein with maltose binding protein (MBP) to solve its poor solubility in a prokaryotic expression system. We showed that the DHAV-1 2C protein has nucleoside triphosphatase (NTPase) activity by measuring the released phosphate. The NTPase of the DHAV-1 2C protein is Mg2+ indispensable and affected by other biochemical characteristics such as Mn2+, Ca2+, Zn2+, Na+ and pH. Guanidine hydrochloride (GdnHCl), a potent inhibitor of viral RNA replication, inhibited ATPase activity of the DHAV-1 2C protein in a dose-dependent manner. Finally, we constructed three mutants to identify the key site for the ATPase activity of the DHAV-1 2C protein. These results indicate that lysine at position 151 of the DHAV-1 2C protein is very important for NTPase activity. Here, we demonstrated and partially characterized that the DHAV-1 2C protein has NTPase activity and showed that mutation of the lysine in the conserved Walker A impairs that activity. The results serve to confirm what is readily predicted from previous work on picornavirus 2C proteins. It also provides a basis for further study of the 2C protein and the function of NTPase activity on the viral life cycle.

Development of an Autoinducible Plasmid for Recombinant Protein Production.

The production of recombinant proteins in E. coli involves such factors as host strains, expression vectors, culture media, and induction methods. The typical procedure to produce heterologous proteins consists of the following: (1) insertion of the target gene into a suitable vector to construct an overexpression plasmid, (2) transformation of a strain specialized for protein production with the constructed plasmid DNA, (3) growth of the host in a suitable medium and induction of the protein production at a right moment, and (4) further growth to get the maximum yield. There are hurdles involved in each of these steps, and researchers have developed many materials or methods, which often require special recipes or procedures. To eliminate the special requirements for recombinant protein production by using readily available materials. Also to save time and effort in the routine protein production work. We started with a vector capable of producing a target protein fused to the C-terminus of the maltose-binding protein (MBP). The mCherry (red fluorescent protein) gene was fused to MBP. It acted as a reporter in the initial screening procedure. The original lethal gene (barnase) was replaced with sacB. We chose 3 stationary phase promoters and made hybrids of them by mixing halves from each one. The T5 promoter was replaced with these stationary phase promoters or their hybrids. The best plasmid was selected by the color intensity of the cell pellet. MBP and GST genes were inserted in the place of sacB, and their production yields were compared with the original plasmid in the conventional way of expression. We constructed an expression plasmid with an autoinducible promoter working in a host that was not specially designed for protein production and in a TB medium that did not contain any secret ingredient, nor was it difficult to prepare unlike Studier's defined medium. This plasmid also contains a color indicator that turns red when protein production is successful. We tested our system with the maltose-binding protein (MBP) and the glutathione S-transferase (GST), and showed that both proteins were produced to a level comparable to what the commercial medium and/or the specialized strain yielded. We developed a plasmid equipped with an autoinducible promoter, a hybrid of the two promoters which were activated at the stationary phase. This plasmid does not need a special E. coli strain nor a sophisticated nor an expensive medium. It produces an intense red (or pink) color, which can be used as an indicator of a successful production of the target protein and as a predictive measure of the amount of the produced target protein. We speculate that this plasmid will have its greatest advantage when growing cells at low temperatures, which would inevitably take a long time.

A novel protein fusion partner, carbohydrate-binding module family 66, to enhance heterologous protein expression in Escherichia coli

BackgroundProteins with novel functions or advanced activities developed by various protein engineering techniques must have sufficient solubility to retain their bioactivity. However, inactive protein aggregates are frequently produced during heterologous protein expression in Escherichia coli. To prevent the formation of inclusion bodies, fusion tag technology has been commonly employed, owing to its good performance in soluble expression of target proteins, ease of application, and purification feasibility. Thus, researchers have continuously developed novel fusion tags to expand the expression capacity of high-value proteins in E. coli.ResultsA novel fusion tag comprising carbohydrate-binding module 66 (CBM66) was developed for the soluble expression of heterologous proteins in E. coli. The target protein solubilization capacity of the CBM66 tag was verified using seven proteins that are poorly expressed or form inclusion bodies in E. coli: four human-derived signaling polypeptides and three microbial enzymes. Compared to native proteins, CBM66-fused proteins exhibited improved solubility and high production titer. The protein-solubilizing effect of the CBM66 tag was compared with that of two commercial tags, maltose-binding protein and glutathione-S-transferase, using poly(ethylene terephthalate) hydrolase (PETase) as a model protein; CBM66 fusion resulted in a 3.7-fold higher expression amount of soluble PETase (approximately 370 mg/L) compared to fusion with the other commercial tags. The intact PETase was purified from the fusion protein upon serial treatment with enterokinase and affinity chromatography using levan-agarose resin. The bioactivity of the three proteins assessed was maintained even when the CBM66 tag was fused.ConclusionsThe use of the CBM66 tag to improve soluble protein expression facilitates the easy and economic production of high-value proteins in E. coli.

MILKSHAKE: novel validation method for antibodies to post-translationally modified targets by surrogate Western blot.

Antibody (Ab) validation is the procedure in which an Ab is thoroughly assayed for sensitivity and specificity in a given application. Validation of Abs against post-translationally modified (PTM) targets is particularly challenging because it requires specifically prepared antigen. Here we describe a novel validation method using surrogate proteins in a Western blot. The surrogate protein, which we termed 'MILKSHAKE,' is a modified maltose binding protein enzymatically conjugated to a peptide from the chosen target thatis either modified or nonmodified at the residue of interest. The certainty of the residue's modification status can be used to confirm Ab specificity. This method also allows for Ab validation even in the absence or limited availability of treated cell lysates.

A designed fusion tag for soluble expression and selective separation of extracellular domains of fibroblast growth factor receptors

Fibroblast growth factor receptors (FGFRs) generate various transduction signals by interaction with fibroblast growth factors (FGFs) and are involved in various biological functions such as cell proliferation, migration, and differentiation. Malfunction of these proteins may lead to the development of various diseases, including cancer. Accordingly, FGFRs are considered an alternative therapeutic target for protein and/or gene therapy. However, the screening of antagonists or agonists of FGFRs is challenging due to their complex structural features associated with protein expression. Herein, we conducted the development of a protease-free cleavable tag (PFCT) for enhancing the solubility of difficult-to express protein by combining maltose-binding protein (MBP) and the C-terminal region of Npu intein. To validate the availability of the resulting tag for the functional production of extracellular domains of FGFRs (Ec_FGFRs), we performed fusion of PFCT with the N-terminus of Ec_FGFRs and analyzed the expression patterns. Almost all PFCT-Ec_FGFR fusion proteins were mainly detected in the soluble fraction except for Ec_FGFR4. Upon addition of the N-terminal region of Npu intein, approximately 85% of the PFCT-Ec_FGFRs was separated into PFCT and Ec_FGFR via intein-mediated cleavage. Additionally, the structural integrity of Ec_FGFR was confirmed by affinity purification using heparin column. Taken together, our study demonstrated that the PFCT could be used for soluble expression and selective separation of Ec_FGFRs.

A comparison between MBP- and NT* as N-terminal fusion partner for recombinant protein production in E. coli

Advances in structural biology have been fueled in part by developing techniques for large-scale heterologous expression and purification of proteins. Nevertheless, this step is still a bottleneck in biophysical studies of many proteins. Often, fusion proteins are used to increase expression levels, solubility, or both. Here, we compare a recently reported fusion tag, NT*, with Maltose Binding Protein (MBP), a well-known fusion tag and solubility enhancer. NT* shows high expression and solubility when used as an N-terminal fusion partner for several aggregation-prone peptides. Its efficacy in enhancing the solubility of aggregation-prone globular proteins has, however, not been tested. We find here that although the overall expression levels for NT* fusions are much higher than those for the MBP fusion, MBP was far superior for enhancing the solubility of the passenger protein. Nevertheless, the effective yield after purification from the soluble fraction of both MBP-fusion and NT*-fusion was comparable, mainly due to higher expression levels in NT*-fusion and a smaller fraction of the passenger protein net weight being locked in the fusion protein. We conclude that NT* is an excellent fusion tag to improve the overall expression of globular proteins but does not increase the passenger protein's solubility compared to MBP. Proteins that are partially soluble or can be refolded in-vitro will significantly benefit from N-terminal NT* fusions. MBP, however, still remains one of the very few options for an N-terminal fusion if the solubility of the protein after expression is critical for preserving its proper fold or activity.

Cryo-EM structure determination of small proteins by nanobody-binding scaffolds (Legobodies)

We describe a general method that allows structure determination of small proteins by single-particle cryo-electron microscopy (cryo-EM). The method is based on the availability of a target-binding nanobody, which is then rigidly attached to two scaffolds: 1) a Fab fragment of an antibody directed against the nanobody and 2) a nanobody-binding protein A fragment fused to maltose binding protein and Fab-binding domains. The overall ensemble of ∼120 kDa, called Legobody, does not perturb the nanobody-target interaction, is easily recognizable in EM images due to its unique shape, and facilitates particle alignment in cryo-EM image processing. The utility of the method is demonstrated for the KDEL receptor, a 23-kDa membrane protein, resulting in a map at 3.2-Å overall resolution with density sufficient for de novo model building, and for the 22-kDa receptor-binding domain (RBD) of SARS-CoV-2 spike protein, resulting in a map at 3.6-Å resolution that allows analysis of the binding interface to the nanobody. The Legobody approach thus overcomes the current size limitations of cryo-EM analysis.