Majority Of Microplastics Research Articles

Microplastics in different tissues of a pelagic squid (Dosidicus gigas) in the northern Humboldt Current ecosystem

Microplastics (MPs) found in marine invertebrates have aroused great concern, but MP ingestion by cephalopods is rare. To evaluate MP contamination in commercially important pelagic squids, we examined the abundance and characteristics of MPs in the gill, intestine, and stomach of jumbo squid Dosidicus gigas (30.9 to 65.0 cm mantle length), collected from the northern Humboldt Current. The average abundance ranged from 4.0 to 7.4 items/individual and 0.2 to 0.7 items/g wet weight for the three tissues. The MPs were sized 80.75 to 4632.27 μm, with larger MPs generally found in the stomach. The majority of MPs were fibrous in shape, blue or black-gray in color, and cellophane in composition. These results revealed the MP distribution in D. gigas and could be driven by its movement pattern and habitat use. Furthermore, this study provides evidence that adherence to gills is probably an alternative means by which pelagic squid accumulate MPs.

Plastic dust in the wind

Microplastics Plastic pollution is ubiquitous throughout the environment, the endmember being microplastics generated from the breakdown of larger, more primary pieces. Brahney et al. investigated the sources of atmospheric microplastics using a combination of observations and atmospheric transport models. They found that the majority of microplastics in the air are derived from the fragmentation of plastics on roadways, with much smaller fractions coming from oceans and agricultural soils. This finding underscores the importance of controlling primary plastic pollution. Proc. Natl. Acad. Sci. U.S.A. 118 , e2020719118 (2021).

Dry and wet deposition of microplastics in a semi-arid region (Shiraz, Iran)

Microplastics (MP) have been retrieved from settled dusts and rainfall collected monthly over a period of a year and daily over an additional period of ten days in the city of Shiraz and at an elevated remote site (Mount Derak) in Iran. Total monthly deposition ranged from about 1000 to 3500 MP m−2 at Shiraz and about 200 to 600 MP m−2 at Mount Derak, with greater deposition taking place during the dry months (June to November) than in months when precipitation events occurred. Overall, MP deposition was dominated by dry deposition, with precipitation appearing to washout MP and inhibit local resuspension of material by dampening the ground. The majority of MP in dust and precipitation (>99%) was of a fibrous nature, with the finest particles measured (<100 μm in length) comprising ~20–40% of MP at Shiraz and ~70–80% of MP at Mount Derak and analysis of selected samples (n = 34) revealing the most abundant polymers to be polypropylene, polyethylene polystyrene and polyethylene terephthalate. While in Shiraz, local sources of MP are likely significant, the occurrence of MP at Mount Derak and back trajectories computed with HYSPLIT suggest that distal sources, mainly carried by air masses from the north and west, are also important. The observations here add to the growing evidence of the global ubiquity and long-range transport of MP in the atmosphere and reinforce calls for more research into the potential impacts of MP in this environmental compartment.

Spatial distribution of microplastics in the superficial sediment of a mangrove in Southeast Brazil: A comparison between fringe and basin

The presence of microplastics (MPs) has been observed globally in every marine environment, including mangroves. However, the distribution of MPs in mangroves comparing fringe and basin forests and their ecological consequences need be better investigated. The objectives of this study were to verify the presence, distribution and types of MPs in a mangrove area in southeast Brazil. Further, we linked the presence of vegetation and urban activities with MPs presence at these sites. Eight mangrove sites in Vitória Bay were delimited and classified as fringe or basin, totaling 16 sample points. Superficial sediments were collected, then MPs classified and quantified by shapes and colors. A total of 2175 MPs were observed in the mangrove basin and fringe of sites analyzed (66.4% and 33.6%, respectively), suggesting high levels of MPs in basin sites. The color proportion of MPs found was blue (54%), transparent (21%), black (10%), red and green (6% each) and yellow and white (<1% each). Filaments accounted for 88.7% of the total, compared with 11.3% from fragments. The majority of MPs were found at the basin sites with less preserved vegetation. A positive correlation was found between the total number of MPs and the density of dead vegetation, indicating that degraded environments are more susceptible to MP accumulation. Thus, our data suggest that MPs are widely distributed and associated with lower hydrodynamism (basin region), less preserved vegetation and urban activities.

Microplastics in the Lut and Kavir Deserts, Iran.

Although microplastics (MPs) are ubiquitous environmental contaminants, little is known about their occurrence and behavior in the terrestrial setting. In this study, MPs have been isolated from soils collected from various geomorphological features (yardangs, sand dunes, moving sands, seasonal lakes) of the Kavir and Lut Deserts on the Iranian plateau. The number of MPs identified in 300 g samples ranged from zero (not detected) in several yardang tops to 25 on some yardang hillsides, with an overall average abundance of about 0.02 MP g-1. The majority of MPs were of a fibrous nature with a size distribution (≤100 μm to ≥1000 μm) skewed toward the lower end, and analysis of a selection of particles by μ-Raman spectroscopy showed that polyethylene terephthalate and Nylon (polyamide) were the principal polymers. Scanning electron microscopy revealed intense degradation of some particles but limited weathering of others. With little evidence of meso- and macroplastics in the deserts, it appears that the majority of MPs are brought into these environments from distant sources via the wind, with smaller, seasonal contributions from runoff associated with the adjacent mountains. It is proposed that some windborne MPs are transported through the deserts relatively rapidly, while others are subject to internal recycling and significant photo-oxidation and mechanical weathering.

Quantification of selected microplastics in Australian urban road dust

Microplastics (1 - 5000 µm) are pervasive in every compartment of our environment. However, little is understood regarding the concentration and size distribution of microplastics in road dust, and how they change in relation to human activity. Within road dust, microplastics move through the environment via atmospheric transportation and stormwater run-off into waterways. Human exposure pathways to road dust include dermal contact, inhalation and ingestion. In this study, road dust along an urban to rural transect within South-East Queensland, Australia was analysed using Accelerated Solvent Extraction followed by pyrolysis Gas Chromatography-Mass Spectrometry (Pyr-GC/MS). Polypropylene, polystyrene, polyethylene terephthalate, polyvinyl chloride, poly (methyl methacrylate) and polyethylene were quantified. Microplastic concentrations ranged from ~0.5 mg/g (rural site) to 6 mg/g (Brisbane city), consisting primarily of polyvinyl chloride (29%) and polyethylene terephthalate (29%). Size fractionation (< 250 µm, 250–500 µm, 500–1000 µm, 1000–2000 µm and 2000–5000 µm) established that the < 250 µm size fraction contained the majority of microplastics by mass (mg/g). Microplastic concentrations in road dust demonstrated a significant relationship with the volume of vehicles (r2 = 0.63), suggesting traffic, as a proxy for human movement, is associated with increased microplastic concentrations in the built environment.

Preliminary results on the occurrence and anatomical distribution of microplastics in wild populations of Nephrops norvegicus from the Adriatic Sea.

This study reports the shapes, dimensional classes, types and counts of microplastics (MPs) found in 23 individuals of N.norvegicus collected from two wild populations of the Adriatic Sea (Mediterranean basin). The focus was on three different anatomical compartments (gut, hepatopancreas and tail), which were analysed separately. MPs were found in all the investigated individuals with an average of about 17 MPs/individual. Fragments were predominant over fibers with a ratio of about 3:1. The majority of MPs were in the dimensional range 50-100μm. The predominant polymers were polyester, polyamide 6, polyvinyl chloride and polyethylene, which together constitute about 61% of all the MPs found. Fragments were more concentrated in the hepatopancreas, with no significant difference between gut and tail, while fibers were more concentrated in the gut than in the tail with hepatopancreas somehow in between. The dimensional class of the MPs influences their anatomical distribution. There were no statistical differences among individuals from the two sampling sites. Sex of the individual did not influence the level of retained MPs, while length had a very marginal effect. The information reported here contributes to understanding of the possible risks linked to human consumption of different tissues from contaminated Norway lobsters.

The abundance and characteristics of microplastics in surface water in the transboundary Ganges River.

Microplastics (plastic<5mm in size) are now known to contaminate riverine systems but understanding about how their concentrations vary spatially and temporally is limited. This information is critical to help identify key sources and pathways of microplastic and develop management interventions. This study provides the first investigation of microplastic abundance, characteristics and temporal variation along the Ganges river; one of the most important catchments of South Asia. From 10 sites along a 2575km stretch of the river, 20 water samples (3600L in total) were filtered (60 samples each from pre- and post-monsoon season). Overall, 140 microplastic particles were identified, with higher concentrations found in the pre-monsoon (71.6%) than in post-monsoon (61.6%) samples. The majority of microplastics were fibres (91%) and the remaining were fragments (9%). We estimate that the Ganges, with the combined flows of the Brahmaputra and Meghna rivers (GBM), could release up to 1-3 billion (109) microplastics into the Bay of Bengal (north-eastern portion of the Indian Ocean) every day. This research provides the first step in understanding microplastic contamination in the Ganges and its contribution to the oceanic microplastic load.

Differences in microplastic abundances within demersal communities highlight the importance of an ecosystem-based approach to microplastic monitoring

Plastic pollution is prevalent in all habitats and microplastic ingestion has been recorded in several different species examined to date. However, most studies have focused solely on commercial species. This study investigates microplastics (MPs) by assessing the levels present in a mixed demersal trawl at two sites in a coastal embayment. MPs were recovered from species' gastrointestinal tracts and polymers identified with μFTIR spectroscopic analysis. Particles recovered comprised 20% natural fibres. The majority of MPs were identified as PE, PVDF, and PETE. Results show an average MP range of 0.11–4.67 MPs individual−1. Fluctuating trendlines for MPs within species suggest that their bioavailability is influenced by several factors. Individual species show significant differences in ingested MP between trawls; however, when the entire trawl community is assessed there is no significant difference between sites. These results suggest that future studies should follow an ecosystem-based approach to monitor MPs.

Low level of microplastic contamination in wild fish from an urban estuary

Microplastic accumulation in estuarine environments is considered the dominant input of land-based plastics into the oceans. In this study, the level of microplastic contamination was evaluated in 26 species of wild fish from the Pearl River Estuary, South China. Results showed that microplastics abundance ranged from 0.17 items individual−1 (Boleophthalmus pectinirostris &Acanthogobius flavimanus) to 1.33 items individual−1 (Plectorhynchus cinctus) among different species. The distribution of microplastic abundance in the gills and gastrointestinal tracts was not significantly different. Microplastics in gills are strongly related to the filtration area of gills in 15 fish species. Fibers were the dominant shapes accounting for 93.45% of the total shapes. The majority of microplastics were <3 mm in size. The most common polymer composition was polyethylene terephthalate (38.2%) and the most common color was black (30.36%). The findings of this study provide baseline data for microplastic contamination in wild fish from an urban estuary.

An audit of microplastic abundance throughout three Australian wastewater treatment plants

Wastewater treatment plants (WWTPs) have been identified as an important pathway of microplastics to the environment. Most studies have focused on wastewater effluent, but generally only a small fraction of microplastics entering WWTPs are present in treated effluent. Instead, the majority of microplastics are expected to be retained in the sludge. To our knowledge, there is limited information on microplastics in sludge/biosolids from Australian WWTPs, despite 75% of biosolids produced in Australia being used for agriculture. This study evaluated the abundance of microplastics throughout the treatment trains of three WWTPs in Australia. The fate of microplastics >25 μm during treatment and their release to the environment was evaluated using an audit approach. The highest microplastic concentrations were detected in the influent, with fibres the dominant form of microplastic found. The screening and grit removal process preceding primary treatment removed 69–79% of microplastics, with these microplastics transported to landfill. Only 0.2–1.8% of the total microplastics in the influent were present in the final effluent, while 8–16% were retained in biosolids. This equates to between 22.1 × 106 to 133 × 106 microplastic particles per day released in effluent, between 864 × 106 to 1020 × 106 microplastic particles per day in biosolids, and between 4100 × 106 to 9100 × 106 microplastic particles per day transported to landfill. This study shows for the first time that most microplastics are retained during the initial screening and grit removal process with the load of microplastics going to landfill an order of magnitude greater than that in biosolids. Landfills may thus be an important sink (and potential future source) of microplastics from wastewater.

Soil microplastic pollution in an e-waste dismantling zone of China

Microplastic pollution is ubiquitous and has emerged as a severe global environmental issue. Recent research on microplastic pollution has mainly focused on aquatic ecosystems, while knowledge gaps still exist regarding microplastic in terrestrial environments. In this study, we established a new method for characterizing microplastic in complex soil substrate using FTIR spectroscopy. Microplastic was separated by density without removing soil organic matter to protect microplastic from damage. The Wizards feature was adopted to automatic, direct and continuous characterize micron-size plastic. Furthermore, 33 soil samples were taken from Guiyu, a notorious e-waste dismantling area in Guangdong Province, China, under different land-use. The results showed that microplastic was involved in 30 samples, and the abundance of microplastic varied considerably among different soils, ranged from 0 to 34,100n kg−1, implying that the e-waste dismantling sites have become the microplastic hotspots. There were 60 kinds of microplastic detected with 6 different shapes and 10 colors, most of which were secondary microplastic. They mainly consisted of engineering-plastic and modified plastic, 88.61% had a size range <1 mm, indicating that the majority of microplastics at Guiyu were derived from e-wastes. The surface morphology of microplastic showed signs of aging and degradation, possibly due to primitive dismantling methods and long-term exposure to the soil. The mean Pb, Cd, Cr, Ba, Cu, Co, As concentrations of microplastic were 20.94, 0.67, 11.82, 308.78, 4.11, 1.26, 3.06 μg·g−1, respectively. Our findings providescientific basis for monitoring and controlling microplastic pollution in terrestrial environments.

Occurrence and distribution of microplastics in commercial fishes from estuarine areas of Guangdong, South China

The widespread presence of microplastics in global aquatic ecosystems has aroused growing concerns regarding their potential impact on aquatic biota. Data show an extensive plastic pollution in coastal areas of Guangdong, China, however, to date there has been no quantitative study on the ingestion of microplastics by commercial fishes from the estuarine areas. In this study, we analyzed the abundance, characteristics, species-specific and spatial distribution of microplastics in six species of commercial fish from estuarine areas of Guangdong. Sixty-four fish samples from nineteen sampling sites were investigated. The average abundance of microplastics in the gastrointestinal tracts of the commercial fishes was 5.4 items/individual, indicating potential food safety. The majority of microplastics were fibers, white in color and less than 1 mm in size. Species-specific and spatial distribution of the microplastics were observed in terms of abundance, shape, color and size. Sillago japonica had the highest (6.9 items/individual), while Alepes djedaba had the lowest (3 items/individual) abundance of microplastics in the gastrointestinal tract. We recommend demersal Mugil cephalus and pelagic Konosirus punctatus to be considered as two species suitable for monitoring microplastics ingestion in the seafloor and water column communities.

Ecotoxicity of Microplastics in Freshwater Biota

Micro plastics are primarily classified as individual pieces of synthetic material made of wide range of organic polymers which is generally called as ‘plastic’. Micro plastics are generally preproduction pellets, micro beads, polymer fibers and degraded micro plastic. Micro plastics make up to as much as 85 percentage of the plastic pollution in the shorelines. This large percentage in the total number of pollutant causes ecological stress caused by the biomagnifications along the food chain. Estimations show that globally majority of micro plastics comes from the runoff of 10 rivers along which includes the Ganges and Indus. To understand the role rivers, play as micro plastic carriers from land to oceans, the sampling of micro plastic is done at the relatively less populated part of Noyyal river and test are carried out to identify presence of micro plastic in the sample. Visual Identification method was used to identify the micro plastic components with relative ease and economy.

Prevalence of microplastics in animal-based traditional medicinal materials: Widespread pollution in terrestrial environments

Microplastics (MPs) pollution is an emerging environmental and health concern. MPs have been extensively observed in the aquatic environment, yet rarely investigated in the terrestrial ecosystem, especially in relation to health risks. To evaluate potential MPs pollution in land-dwelling animal medicine materials, we collected 20 types of small animal-based medicinal materials and 10 types of available fresh terrestrial animals from eight different regions in China. MPs were found in all medicinal materials with an average incidence rate of 94.67%. The abundance of MPs was in the range of 1.80 ± 0.38 to 7.80 ± 0.83 items/individual or 1.59 ± 0.33 to 43.56 ± 9.22 items/g (dry weight), with polymer distribution by polyethylene terephthalate (40.45%), rayon (30.64%), polyethylene (10.11%), nylon (7.35%), polypropylene (5.93%), and polyvinyl chloride (5.52%). The majority of MPs were microfibers (84.68%), with 15.32% of fragments. Moreover, MPs were directly observed in the intestine, detected in all ten types of fresh medicinal animals with the abundance of 0.83 ± 0.35 to 3.42 ± 0.46 items/individual. Furthermore, significant positive correlations (R: 0.32–0.99, p < 0.05) of MPs characteristics were found between medicinal materials and fresh animals, including shape, size, color, and polymer distribution of MPs. The results support that MPs in the medicinal materials were likely derived from living animals. This study demonstrates the prevalence of MPs in animal-based, traditional medicinal materials, and also suggests widespread MPs pollution in terrestrial environments and latent health risks.

Occurrence of microplastics in gastrointestinal tracts and gills of fish from Beibu Gulf, South China Sea

Microplastics are widespread across the global oceans, yet the potential risks of the ubiquitous environmental contaminant to marine organisms has been less known. Accumulation of microplastics and associated contaminants in marine fish, may pose adverse impacts to human health via seafood consumption. This study evaluated microplastic contamination in 24 fish species collected from Beibu Gulf, one of the world’s largest fishing grounds in South China Sea. Microplastics were detected in 12 fish species at an abundance of 0.027–1.000 items individual−1 and found in fish stomach, intestines and gills with the count percentage of 57.7%, 34.6% and 7.7%, respectively. Transparent fibers were observed as the predominant microplastics, which might be ingested accidently by fish or transferred through other animals at lower trophic levels. Majority of microplastics were identified as polyester (44%) and nylon (38%), whereas polypropylene (6%), polyethylene (6%), and acrylics (6%) were also found. Relatively, higher microplastic abundances were found in demersal fish compared to the pelagic species. Overall, the abundance of microplastics was documented as relatively low in the commercial fish collected from the open water of Beibu Gulf, South China Sea.

Reproductive toxicity of primary and secondary microplastics to three cladocerans during chronic exposure

Microplastics (<5 mm) are distributed ubiquitously in natural environments. The majority of microplastics in aquatic environments are shown to have rough surfaces due to various weathering processes (secondary microplastics; SMP), while laboratory studies predominantly utilise pristine microplastics (primary microplastics; PMP). Here we present the results from a study comparing the chronic effects of pristine PMP and artificially weathered SMP to three different Cladoceran species (Daphnia magna, Daphnia pulex, Ceriodaphnia dubia). We assessed the impact of PMP and SMP on reproductive output using various measured parameters, including time of first brood, size of first brood, size of first three broods, cumulative number of neonates, total number of broods and terminal length of test animals. Our results show that reproductive output of all species declined in a dose-dependent manner. The No Observed Effect Concentration (NOEC) was less than the lowest tested concentration (102 p/mL) for at least one measured endpoint for all species and both PMP and SMP. Further, it was inferred that species sensitivity varied inversely with body size for most endpoints, resulting in C. dubia being the most sensitive species; and D. magna being the least sensitive species under study. In addition, PMP appeared to have greater toxic potential as compared to SMP. This study is the first to directly compare the chronic toxicity of both pristine and weathered microplastic particles on three freshwater toxicological model organisms. Our results indicate that sensitivity in reproduction and growth to microplastics may differ between species and type of microplastic exposed; highlighting the importance of using multiple species and structural types of particles.

Typhoons increase the abundance of microplastics in the marine environment and cultured organisms: A case study in Sanggou Bay, China

Microplastic contamination in the ocean has emerged as an environmental issue of global importance. The most effective strategy to control microplastic pollution is to reduce the terrestrial input, but severe weather conditions make it difficult. This study investigated microplastic abundance and characteristics in the seawater, sediments, and cultured oysters (Crassostrea gigas) of Sanggou Bay (China) before and after two typhoons with an average rainfall of 19.2 mm/d over 8 days. Prior to the typhoons, microplastic levels in the seawater, sediment, and oysters were 63.6 ± 37.4 items/L, 2178 ± 369 items/kg, and 41.0 ± 15.5 items/individual, with fibers being the predominant shape. Typhoons increased the average concentrations of microplastics in the seawater and sediments by approximately 40%, and the proportions of fragments, spherules, and granules in the sediments increased by 9.6%, 4.0%, and 4.3%, respectively. The majority of microplastics in seawater, sediments, and oysters collected before the typhoons could be grouped into sizes of 0.1–0.5 mm (36.7%), 0.05–0.1 mm (42.6%), and 0.1–0.5 mm (47.1%), respectively. After the typhoons, the most abundant size classes of microplastics in the three environmental compartments were 0.05–0.1 mm (39.2%) for seawater, 0.1–0.5 mm (37.1%) for sediments, and 0.05–0.1 mm (29.9%) for oysters. The typhoons also altered color distribution of microplastics and increased the proportions of polypropylene, polystyrene, and polyethylene terephthalate in seawater. Scanning electron microscopy/energy dispersive spectroscopy showed that organic matter and heavy metals were present on the microplastics collected from oysters. Our results suggest that weather conditions should be considered when investigating marine microplastics.

Microplastics releasing from personal care and cosmetic products in China

Microplastics (MPs) have become a major global issue; their release from various products affects the aquatic environment, especially marine ecosystems. As a primary source of MPs, personal care and cosmetics products (PCCPs) containing MPs contribute to this environmental risk. We visited several supermarket chains in Beijing, China to identify PCCPs containing MPs. Overall, 7.1% of facial cleansers contained MPs, with an average weight of 25.04±10.69mgMP/g and average size of 313±130μm; whereas, 2.2% of shower gel products contained an average weight of 17.80±7.50mgMPs/g with an average size of 422±185μm. The majority of MPs were made of polyethylene, based on Raman and Fourier transform-infrared spectra analyses, while only a few were made of walnut shells and carbon particles. Finally, estimated 39tons MPs were released into the environment based on PCCPs use in China based on available data.

Microplastic abundance, distribution and composition along a latitudinal gradient in the Atlantic Ocean

Microplastics in the world's oceans are a global concern due to the potential threat they pose to marine organisms. This study investigated microplastic abundance, distribution and composition in the Atlantic Ocean on a transect from the Bay of Biscay to Cape Town, South Africa. Microplastics were sampled from sub-surface waters using the underway system of the RV Polarstern. Potential microplastics were isolated from samples and FT-IR spectroscopy was used to identify polymer types. Of the particles analysed, 63% were rayon and 37% were synthetic polymers. The majority of microplastics were identified as polyesters (49%) and blends of polyamide or acrylic/polyester (43%). Overall, fibres (94%) were predominant. Average microplastic abundance in the Atlantic Ocean was 1.15±1.45particlesm−3. Of the 76 samples, 14 were from the Benguela upwelling and there was no statistically significant difference in microplastic abundance between upwelled and non-upwelled sites.