Maintenance Of Cell Numbers Research Articles

Alginate-waterborne polyurethane 3D bioprinted scaffolds for articular cartilage tissue engineering

Articular cartilage defects comprise a spectrum of diseases associated with degeneration or damage of the connective tissue present in particular joints, presenting progressive osteoarthritis if left untreated. In vitro tissue regeneration is an innovative treatment for articular cartilage injuries that is attracting not only clinical attention, but also great interest in the development of novel biomaterials, since this procedure involves the formation of a neotissue with the help of material support. In this work, functional alginate and waterborne polyurethane (WBPU) scaffolds have been developed for articular cartilage regeneration using 3D bioprinting technology. The particular properties of alginate-WBPU blends, like mechanical strength, elasticity and moistening, mimic the original cartilage tissue characteristics, being ideal for this application. To fabricate the scaffolds, mature chondrocytes were loaded into different alginate-WBPU inks with rheological properties suitable for 3D bioprinting. Bioinks with high alginate content showed better 3D printing performance, as well as structural integrity and cell viability, being most suitable for scaffolds fabrication. After 28 days of in vitro cartilage formation experiments, scaffolds containing 3.2 and 6.4 % alginate resulted in the maintenance of cell number in the range of 104 chondrocytes/scaffold in differentiated phenotypes, capable of synthesizing specialized extracellular matrix (ECM) up to 6 μg of glycosaminoglycans (GAG) and thus, showing a potential application of these scaffolds for in vitro regeneration of articular cartilage tissue.

Electrospun elastin-like polypeptide enriched polyurethanes and their interactions with vascular smooth muscle cells

In vascular tissue, elastin is an essential extracellular matrix protein that plays an important biomechanical and biological signalling role. Native elastin is insoluble and is difficult to extract from tissues, which results in its relatively rare use for the fabrication of vascular tissue engineering scaffolds. Recombinant elastin-like polypeptide-4 (ELP4), which mimics the structure and function of native tropoelastin, represents a practical alternative to the native elastic fibre for vascular applications. In this study, electrospinning was utilized to fabricate fibrous scaffolds which were subsequently surface modified with ELP4 and used as substrates for smooth muscle cell culture. ELP4 surface modified materials demonstrated enhanced smooth muscle cell (SMC) adhesion and maintenance of cell numbers over a 1-week period relative to controls. SMCs seeded on the ELP4 surface modified materials were also shown to exhibit the cell morphology and biological markers of a contractile phenotype including a spindle-like morphology, actin filament organization and smooth muscle myosin heavy chain expression. Competitive inhibition experiments demonstrated that the elastin–laminin cell surface receptor and its affinity for the VGVAPG peptide sequence on ELP4 molecules are likely involved in the initial SMC contact with the ELP4 modified materials. Elastin-like polypeptides show promise as surface modifiers for candidate scaffolds for engineering contractile vascular tissues.

Cell Life and Death in the Anterior Pituitary Gland: Role of Oestrogens

Apoptotic processes play an important role in the maintenance of cell numbers in the anterior pituitary gland during physiological endocrine events. In this review, we summarise the regulation of apoptosis of anterior pituitary cells, particularly lactotrophs, somatotrophs and gonadotrophs, and analyse the possible mechanisms involved in oestrogen-induced apoptosis in anterior pituitary cells. Oestrogens exert apoptotic actions in several cell types and act as modulators of pituitary cell renewal, sensitising cells to both mitogenic and apoptotic signals. Local synthesis of growth factors and cytokines induced by oestradiol as well as changes in phenotypic features that enhance the responsiveness of anterior pituitary cells to pro-apoptotic factors may account for cyclical apoptotic activity in anterior pituitary cells during the oestrous cycle. Considering that tissue homeostasis results from a balance between cell proliferation and death and that mechanisms involved in apoptosis are tightly regulated, defects in cell death processes could have a considerable physiopathological impact.

COPD Is Associated With a Macrophage Scavenger Receptor-1 Gene Sequence Variation

Macrophages play an important role in COPD. We genotyped at-risk smokers to evaluate the role of polymorphisms in the macrophage scavenger receptor-1 gene (MSR1) in COPD susceptibility and related measures of lung function. Then, in macrophages from donors with specific MSR1 genotypes, we determined the effect of MSR1 single nucleotide polymorphisms (SNPs) on macrophage function by examining in vitro adhesion, receptor expression, and cell number in culture as an index of increased survival/reduced apoptosis. Smokers (> or = 20 pack-years) who were > 40 years (n = 714) were genotyped for seven SNPs; one nonsense change (ex6R293x_C/T), four missense changes (ex4V113A_T/C, ex4P174Y_G/T, ex11H441R_A/G, and in the ligand binding site ex6P275A_C/G), -176511_A/G in the promoter region, and IVS5-59_C/A in the intron. Nonsmoking healthy volunteers (n = 85) were genotyped, and peripheral blood monocytes were isolated from seven P275A_CG/GG and eight P275A_CC controls and cultured to generate monocyte-derived macrophages (MDM). The effectiveness of trypsin and scraping to dislodge MDM was scored on a four-point subjective scale. MDM were counted on a Z1 particle counter and surface expression of MSR1 was determined by fluorescence-activated cell sorting analysis using secondary staining of antibodies against human macrophage scavenger receptor (MSR1). The MSR1-coding SNP P275A was associated with susceptibility to COPD in smokers (P < .005) and a lower percent predicted (pp) FEV(1), FEV(1)/FVC, and pp forced expiratory flow (FEF)(25-75) (P = .03). P275A_CG/GG was also associated with increases in maintenance of cell number in culture (increased survival/reduced apoptosis), MSR1 expression, and adhesion of macrophages to plastic in vitro (P < .05). The MSR1 association with COPD susceptibility, COPD-related measures of lung function, and abnormalities of macrophage function may account for significant COPD morbidity.

Comparative effects of oleoyl-estrone and a specific β3-adrenergic agonist (CL316, 243) on the expression of genes involved in energy metabolism of rat white adipose tissue

BackgroundThe combination of oleoyl-estrone (OE) and a selective β3-adrenergic agonist (B3A; CL316,243) treatment in rats results in a profound and rapid wasting of body reserves (lipid).MethodsIn the present study we investigated the effect of OE (oral gavage) and/or B3A (subcutaneous constant infusion) administration for 10 days to overweight male rats, compared with controls, on three distinct white adipose tissue (WAT) sites: subcutaneous inguinal, retroperitoneal and epididymal. Tissue weight, DNA (and, from these values cellularity), cAMP content and the expression of several key energy handling metabolism and control genes were analyzed and computed in relation to the whole site mass.ResultsBoth OE and B3A significantly decreased WAT mass, with no loss of DNA (cell numbers). OE decreased and B3A increased cAMP. Gene expression patterns were markedly different for OE and B3A. OE tended to decrease expression of most genes studied, with no changes (versus controls) of lipolytic but decrease of lipogenic enzyme genes. The effects of B3A were widely different, with a generalized increase in the expression of most genes, including the adrenergic receptors, and, especially the uncoupling protein UCP1.DiscussionOE and B3A, elicit widely different responses in WAT gene expression, end producing similar effects, such as shrinking of WAT, loss of fat, maintenance of cell numbers. OE acted essentially on the balance of lipolysis-lipogenesis and the blocking of the uptake of substrates; its decrease of synthesis favouring lipolysis. B3A induced a shotgun increase in the expression of most regulatory systems in the adipocyte, an effect that in the end favoured again the loss of lipid; this barely selective increase probably produces inefficiency, which coupled with the increase in UCP1 expression may help WAT to waste energy through thermogenesis.ConclusionsThere were considerable differences in the responses of the three WAT sites. OE in general lowered gene expression and stealthily induced a substrate imbalance. B3A increasing the expression of most genes enhanced energy waste through inefficiency rather than through specific pathway activation. There was not a synergistic effect between OE and B3A in WAT, but their combined action increased WAT energy waste.

Fabrication of a layered microstructured polycaprolactone construct for 3-D tissue engineering

Successful artificial tissue scaffolds support regeneration by promoting cellular organization as well as appropriate mechanical and biological functionality. We have previously shown in vitro that 2-D substrates with micrometer-scale grooves (5 μm deep, 18 μm wide, with 12 μm spacing) can induce cell orientation and ECM alignment. Here, we have transferred this microtopography onto biodegradable polycaprolactone (PCL) thin films. We further developed a technique to layer these cellularized microtextured scaffolds into a 3-D tissue construct. A surface modification technique was used to attach photoreactive acrylate groups on the PCL scaffold surface onto which poly(ethylene glycol)-diacrylate (PEG-DA) gel could be photopolymerized. PEG-DA serves as an adhesive layer between PCL scaffolds, resulting in a VSMC-seeded layered 3-D composite structure that is highly organized and structurally stable. The PCL surface modification chemistry was confirmed via XPS, and the maintenance of cell number and orientation on the modified PCL scaffolds was demonstrated using colorimetric and imaging techniques. Cell number and orientation were also investigated after cells were cultured in the layered 3-D configuration. Such 3-D tissue mimics fabricated with precise cellular organization will enable systematic testing of the effects of cellular orientation on the functional and mechanical properties of tissue-engineered blood vessels.

Curcumin Suppresses AP1 Transcription Factor-dependent Differentiation and Activates Apoptosis in Human Epidermal Keratinocytes

The diet-derived cancer preventive agent, curcumin, inhibits skin cancer cell proliferation and tumor formation. However, its effect on normal human keratinocyte differentiation, proliferation, and apoptosis has not been adequately studied. Involucrin (hINV) is a marker of keratinocyte differentiation and a useful model for the study of chemopreventive agent action. We show that curcumin suppresses the differentiation agent-dependent activation of hINV gene expression and that an AP1 transcription factor DNA binding site in the hINV gene is required for this regulation. A protein kinase C, Ras, MEKK1, MEK3 signaling cascade controls hINV expression by regulating AP1 factor level. Curcumin treatment inhibits the novel protein kinase C-, Ras-, and MEKK1-dependent activation of hINV promoter activity and reduces the differentiation agent-dependent increase in AP1 factor level and DNA binding. This reduction requires proteasome function. In addition, curcumin treatment reduces cell number, which is associated with a reduced cyclin and cdk1 levels. Curcumin treatment also suppresses the Bcl-xL level, leading to reduced mitochondrial membrane potential and increased cleavage of procaspases and poly(ADP-ribose) polymerase. These studies provide important insights regarding the mechanism whereby curcumin acts as a chemopreventive agent in normal human epidermis.

Effects of collagen type on the behavior of adult canine annulus fibrosus cells in collagen–glycosaminoglycan scaffolds

The healing of intervertebral disc defects may be improved by the implantation of cell-seeded collagen-based scaffolds. The present study evaluated in vitro the effects of the collagen type (type I vs type II) from which the scaffolds were fabricated on the behavior of adult canine annulus fibrosus cell-seeded collagen-glycosaminoglycan (GAG) scaffolds. Protein and GAG biosynthesis continued through the 8-week period of the experiment, demonstrating the viability of the cells in type I and type II collagen-GAG scaffolds. Statistical analysis revealed no significant effect of the type of collagen that makes up the scaffold on the biosynthetic activity. For both scaffold types, the amount of retained newly synthesized proteins increased from 1 to 2 weeks and from 6 to the 8 weeks. In contrast, the rate of GAG retention increased to a maximum at 4 weeks for both types of scaffolds, then decreased to about 50% of that level after 8 weeks. The number of cells generally increased the first week but then decreased in type I scaffolds while remaining constant in type II scaffolds. It could be assumed that most newly synthesized protein was lost to the medium, as the quantity of protein and collagen remained constant. Cell-mediated contraction of the scaffolds contributed to folds that formed in the constructs and to create an oriented architecture tissue. These findings commend the use of a type II collagen-GAG scaffold for further study on the basis of its maintenance of cell number and the slightly higher accumulated GAG content.