Maintain Drug Supersaturation Research Articles

Eudragit L100-coated nintedanib nanocrystals improve oral bioavailability by reducing drug particle size and maintaining drug supersaturation

The aim of this study was to prepare nintedanib nanocrystals (BIBF-NCs) to lower the solubility of the drug in the stomach, maintain the supersaturation of the drug in the intestine, and improve the oral absorption of nintedanib (BIBF). In this study, BIBF-NCs were prepared by acid solubilization and alkaline precipitation following nano granding method, with a particle size of 290.80 nm and a zeta potential of −49.13 mV. Subsequently, Nintedanib enteric-coated nanocrystals (BIBF-NCs@L100) were obtained by coating with Eudragit L100. The microscopic morphology, crystalline characteristics, stability, and in vitro dissolution of BIBF-NCs and BIBF-NCs@L100 were also studied. In addition, the in vivo pharmacokinetic behaviors of Samples prepared according to the prescription process of commercially available soft capsules (soft capsules), BIBF-NCs, and BIBF-NCs@L100 were further investigated. The results showed that the oral bioavailability of BIBF-NCs and BIBF-NCs@L100 were increased by 1.43 and 2.58 times, compared with that of the soft capsules. BIBF-NCs@L100 effectively reduced the release of BIBF in the formulation in the stomach, allowing more drug to reach the intestine in the form of nanocrystals, maintaining the supersaturation in the intestine, thereby improving the oral bioavailability of the drug.

Quantitative Investigation of Intestinal Drug Absorption Enhancement by Drug-Rich Nanodroplets Generated via Liquid-Liquid Phase Separation.

Drug-rich droplets formed through liquid-liquid phase separation (LLPS) have the potential to enhance the oral absorption of drugs. This can be attributed to the diffusion of these droplets into the unstirred water layer (UWL) of the gastrointestinal tract and their reservoir effects on maintaining drug supersaturation. However, a quantitative understanding of the effect of drug-rich droplets on intestinal drug absorption is still lacking. In this study, the enhancement of intestinal drug absorption through the formation of drug-rich droplets was quantitatively evaluated on a mechanistic basis. To obtain fenofibrate (FFB)-rich droplets, an amorphous solid dispersion (ASD) of FFB/hypromellose (HPMC) was dispersed in an aqueous medium. Physicochemical characterization confirmed the presence of nanosized FFB-rich droplets in the supercooled liquid state within the FFB/HPMC ASD dispersion. An in situ single-pass intestinal perfusion (SPIP) assay in rats demonstrated that increased quantities of FFB-rich nanodroplets enhanced the intestinal absorption of FFB. The effective diffusion of FFB-rich nanodroplets through UWL would partially contribute to the improved FFB absorption. Additionally, confocal laser scanning microscopy (CLSM) of cross sections of the rat intestine after the administration of fluorescently labeled FFB-rich nanodroplets showed that these nanodroplets were directly taken up by small intestinal epithelial cells. Therefore, the direct uptake of drug-rich nanodroplets by the small intestine is a potential mechanism for improving FFB absorption in the intestine. To quantitatively evaluate the impact of FFB-rich droplets on the FFB absorption enhancement, we determined the apparent permeabilities of the FFB-rich nanodroplets and dissolved FFB based on the SPIP results. The apparent permeability of the FFB-rich nanodroplets was 110-130 times lower than that of dissolved FFB. However, when the FFB-rich nanodroplet concentration was several hundred times higher than that of dissolved FFB, the FFB-rich nanodroplets contributed significantly to FFB absorption improvement. The present study highlights that drug-rich nanodroplets play a direct role in enhancing drug absorption in the gastrointestinal tract, indicating their potential for further improvement of oral absorption from ASD formulations.

Evaluation of Suitable Polymeric Matrix/Carriers during Loading of Poorly Water Soluble Drugs onto Mesoporous Silica: Physical Stability and In Vitro Supersaturation.

The application of mesoporous carriers in formulations of amorphous solid dispersions (ASDs) has been suggested to enhance the stability of amorphous drugs. However, mesoporous carriers do not demonstrate satisfactory inhibitory effects on the precipitation of active pharmaceutical ingredients (APIs), and the inclusion of an appropriate polymer within ASDs becomes imperative to maintaining drug supersaturation. The aim of this study was to evaluate ternary olanzapine (OLN) ASDs with Syloid 244FP and to find an appropriate polymeric carrier. The polymer's selection criteria were based on the physical stability of the ASDs and the release rate of the drug from the systems. The polymers investigated were hydroxypropylmethyl cellulose (HPMC) and copovidone (coPVP). The formation of ASDs was achievable in all investigated cases, as demonstrated by the complete lack of crystallinity confirmed through both powder X-ray diffraction (pXRD) analysis and differential scanning calorimetry (DSC) for all developed formulations. The solvent shift method was employed to evaluate the ability of the studied carriers to inhibit the precipitation of supersaturated OLN. coPVP emerged as a more suitable precipitation inhibitor compared with HPMC and Syloid 244 FP. Subsequently, in vitro dissolution studies under non-sink conditions revealed a higher degree of supersaturation in ternary systems where coPVP was used as a polymeric carrier, as these systems exhibited, under the examined conditions, up to a 2-fold increase in the released OLN compared with the pure crystalline drug. Moreover, stability studies conducted utilizing pXRD demonstrated that ternary formulations incorporating coPVP and Syloid 244 FP maintained stability for an extended period of 8 months. In contrast, binary systems exhibited a comparatively shorter stability duration, indicating the synergistic effect of coPVP and Syloid 244 FP on the physical stability of the amorphous API. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) studies showed that the development of stronger molecular interactions can be provided as an explanation for this synergistic effect, as the formation of robust H-bonds may be considered responsible for inhibiting the precipitation of the supersaturated API. Therefore, the incorporation of coPVP into OLN ASDs with Syloid 244 FP is considered a highly promising technique for increasing the degree of OLN supersaturation in in vitro dissolution studies and improving the stability of systems.

A SYSTEMATIC REVIEW ON SUPERSATURABLE SELF-NANO EMULSIFYING DRUG DELIVERY SYSTEM: A POTENTIAL STRATEGY FOR DRUGS WITH POOR ORAL BIOAVAILABILITY

The most fundamental important extensive constitutive of drug molecules to be available for systemic absorption is aqueous solubility; subsequently, that is the nature of GIT fluid. When the drug molecules become solubilized, it has to reach the systemic circulation via the biological membrane. The solubility problem of many effective pharmaceutical molecules is still one of the major challenges in the formulation of this molecule. Drug molecules that belong to class II have a problem in bioavailability mainly due to low aqueous solubility and the rate-limiting step is the dissolution process and so electing of suitable drug delivery and proper additives are decisive to overcome this major obstruction and promote the fraction that will reach the systemic circulation. Among the different lipid-based systems, the su-SNEDDSs have gained attention because the inclusion of precipitation inhibitors within su-SNEDDSs helps maintain drug supersaturation after dispersion and digestion in the gastrointestinal tract. This enhances the bioavailability of drugs and minimizes the variability of exposure. Nowadays, supersaturable self-nano emulsifying and nano lipid-based drug delivery systems have constrained a substantial concern from pharmaceutical scientists for managing the oral delivery of poorly water-soluble compounds. By following oral administration, self-nano emulsifying drug delivery systems show complex aqueous dispersion and digestion in the GIT and enduring intestinal lymphatic transport, exorbitant pre-absorptive metabolism by gut membrane-bound cytochrome enzymes and preventing P-gp mediated drug efflux. Mostly these processes result in drug supersaturation, which leads to increased absorption or the high drug concentrations may cause precipitation with capricious and variable oral bioavailability. This procession review briefly summarized drug supersaturation obtained from self-nano emulsifying and other lipid-based formulations and this review also delineate the effects of numerous physiological factors and the probable interactions between PIs and lipid, lipase or lipid digested products on the in vivo performance of su-SNEDDS and focuses on reviewing the application of su-SNEDDS in enhancing the solubility and bioavailability of anti-cancer drugs in cancer therapy.

Effects of polymer addition on the non-strongly interacting binary co-amorphous system carvedilol-tryptophan

Co-amorphous systems have been developed to address the solubility challenge of poorly water-soluble crystalline drugs. However, due to the thermodynamic instability of amorphous forms, amorphization may result in recrystallization during manufacturing, storage, or dissolution, which is one of the main challenges in the pharmaceutical development of amorphous systems. This could also be the case in some co-amorphous systems with only non-strong interactions between the drug and the co-former (such as hydrogen bond formation and π-π interactions). In this study, a small amount of polymer was added to the binary co-amorphous mixture carvedilol (CAR) - tryptophan (TRP) at a molar ratio of 1:1 and subjected to mechanical activation by ball milling to produce amorphous systems, in order to investigate the effect of co-formulated polymer on the physical properties (solubility, stability, etc.) of non-strongly interacting binary co-amorphous mixtures. After co-formulating polymer to the binary co-amorphous system, stronger interactions were found between CAR and polymer than between CAR and TRP in the ternary polymer containing co-amorphous systems. Compared to the corresponding binary co-amorphous systems, larger areas under the dissolution curves were achieved, indicating an improvement in dissolution behaviour due to a more gradual increase in dissolved drug concentration and a longer period of maintaining drug supersaturation. There was no negative effect of polymer addition on physical stability at room temperature under dry storage conditions for 6 months. Therefore, it is possible to design ternary co-amorphous drug delivery systems with optimized dissolution characteristics by adding a small amount of polymer into co-amorphous binary systems.

Impact of Hydroxypropyl Methylcellulose Acetate Succinate Critical Aggregation Concentration on Celecoxib Supersaturation.

Polymers play an important role in amorphous solid dispersions (ASDs), enhancing stability in the solid state and maintaining supersaturation in aqueous solutions of intrinsically low-water-soluble drug candidates. Hydroxypropyl methylcellulose acetate succinate (HPMCAS) is widely used in ASDs due to its hydrophobic/hydrophilic balance and ionizability of the substituent functionalities. While colloid formation of HPMCAS in solution due to this hydrophobic/hydrophilic balance has been studied, the impact of the polymer conformation (random coil vs aggregated) on drug supersaturation of ASDs is not well understood. To our knowledge, this is the first report where the critical aggregation concentration for three grades of HPMCAS (HF/MF/LF) has been determined via fluorescence spectroscopy using the environment-sensitive probe pyrene. The specific impact of polymer conformation (random coil vs aggregate) on the model drug celecoxib (CLX) has been elucidated with fluorescence quenching and nuclear magnetic resonance (NMR) spectroscopy. A negative deviation of the Stern-Volmer plot indicated that aggregated HPMCAS effectively blocked the quencher's access to CLX. This is further supported by NMR observations, where NMR spectra indicate a larger change of chemical shift of the -NH group of CLX when HPMCAS is above its aggregated concentration, suggesting strong H-bonding interactions between aggregated HPMCAS and CLX. Finally, the supersaturation-precipitation study shows that all three grades of HPMCAS in the aggregated state significantly enhanced CLX supersaturation compared to the nonaggregated state, indicating that polymer aggregation plays a critical role in maintaining drug supersaturation.

A COMPREHENSIVE REVIEW ON SUPERSATURABLE SELF-NANOEMULSIFYING DRUG DELIVERY SYSTEM

Lipid-based drug delivery systems are extensively reported in the literature for enhancing drug solubility, permeability, and bioavailability. Self-nanoemulsifying drug delivery systems (SNEDDS) are a superior strategy for enhancing solubility and bioavailability of poorly water-soluble compounds and the most prevailing and commercially viable oil-based approach for drugs that exhibit low dissolution rate and inadequate absorption. However, these formulations have few limitations that include in vivo drug precipitation, inferior in vitro in vivo correlation owing to unavailability of in vitro tests, handling issues of liquid formulation, and physicochemical instability of drugs. These limitations are overcome by potential systems such as supersaturable SNEDDS (S-SNEDDS) which are prepared by addition of precipitation inhibitors into formulated SNEDDS to maintain drug supersaturation post dispersion in gastrointestinal tract. These systems improve drug bioavailability and reduce the inconsistency of exposure. In addition, these formulations also help to overcome the drawbacks of liquid and capsule dosage forms. The S-SNEDDS provides an effective approach for improving the dissolution and bioavailability of anti-cancer agents. In this article, an attempt was made to present an overview of SNEDDS, S-SNEDDS, their mechanism, formulation excipients, recent advancements, advantages, and disadvantages of SNEDDS formulations. The article also focuses on reviewing the application of S-SNEDDS in enhancing the solubility and bioavailability of anti-cancer drugs in cancer therapy.

Engineered Hydrophobin as a Crystallization Inhibitor for Flufenamic Acid.

Hydrophobins are multifunctional, highly surface-active proteins produced in filamentous fungi. Due to their surface-active properties, resistance to degradation, and potential immunological inertness, hydrophobins have been used in many applications such as protein purification, increasing implant biocompatibility, increasing water solubility of insoluble drugs, and foam stabilizers for food products. To further explore surface-active and self-assembly properties of hydrophobins, we evaluated an engineered, recombinant hydrophobin (class II type 1, HFB1) as a potential crystallization inhibitor for maintaining drug supersaturation for an amorphous drug delivery system. A supersaturation-precipitation method was employed utilizing an ultraviolet (UV) fiber optic system for tracking precipitation kinetics of a model drug, flufenamic acid (FA), that was selected due to its low aqueous solubility in its crystalline form. The effectiveness of HFB1 as a crystallization inhibitor was compared with commonly used pharmaceutical grade polymeric crystallization inhibitors. The following polymers were selected to compare with HFB1: methocel (A4C grade), methocel (K15M grade), Kollidon vinylpyrrolidone-vinyl acetate (VA64), and hydroxypropyl methylcellulose acetate succinate (HPMCAS) (MF grade). The supersaturation-precipitation experiments concluded that HFB1 outperformed all polymers tested in this study and can potentially be used as a crystallization inhibitor at significantly lower concentrations in amorphous drug delivery systems. Dynamic light scattering (DLS) and circular dichroism (CD) results suggest a crystallization inhibition mechanism in which HFB1 functions differently depending on whether flufenamic acid is molecularly dispersed but supersaturated relative to its crystalline solubility or it has exceeded its amorphous solubility limit and exists as a phase-separated drug-rich colloid.

Sacubitril-valsartan cocrystal revisited: role of polymer excipients in the formulation

ABSTRACT Objectives: This study investigated the impact of polymer excipients on a typical cocrystal for sacubitril (SAC) and valsartan (VAL), aiming to guide optional formulation design and maximize oral bioavailability. Methods: Poly vinyl pyrrolidone (PVP) and hydroxypropyl cellulose (HPC) and hydroxypropyl methylcellulose (HPMC) were selected. The dissolution/permeation system was used to predict both the kinetics of drug supersaturation and the simple permeation. The intermolecular interaction was analyzed by 1H NMR spectroscopy and molecular dynamics simulation. Pharmacokinetic study was performed to assess the impact of polymer excipients in vivo. Results: Our study found that unappreciated excipients in the formulation, especially some polymers, might compete with the intermolecular hydrogen bonding among the cocrystals components and provide unexpected affinity, and thus leverage the therapeutic benefits. HPMC as a coating excipient used in the Entresto® tablet hampered the supersaturation of API, which led to the poor oral absorption of cocrystals. Conversely, PVP appeared to promote and maintain drug supersaturation, resulting in improved bioavailability of API. Conclusion: In conclusion, understanding the interplay between the cocrystal components and polymers is the key to optimizing the excipients to maximize the performance of cocrystal based oral drug formulation.

Current Status of Supersaturable Self-Emulsifying Drug Delivery Systems.

Self-emulsifying drug delivery systems (SEDDSs) are a vital strategy to enhance the bioavailability (BA) of formulations of poorly water-soluble compounds. However, these formulations have certain limitations, including in vivo drug precipitation, poor in vitro in vivo correlation due to a lack of predictive in vitro tests, issues in handling of liquid formulation, and physico-chemical instability of drug and/or vehicle components. To overcome these limitations, which restrict the potential usage of such systems, the supersaturable SEDDSs (su-SEDDSs) have gained attention based on the fact that the inclusion of precipitation inhibitors (PIs) within SEDDSs helps maintain drug supersaturation after dispersion and digestion in the gastrointestinal tract. This improves the BA of drugs and reduces the variability of exposure. In addition, the formulation of solid su-SEDDSs has helped to overcome disadvantages of liquid or capsule dosage form. This review article discusses, in detail, the current status of su-SEDDSs that overcome the limitations of conventional SEDDSs. It discusses the definition and range of su-SEDDSs, the principle mechanisms underlying precipitation inhibition and enhanced in vivo absorption, drug application cases, biorelevance in vitro digestion models, and the development of liquid su-SEDDSs to solid dosage forms. This review also describes the effects of various physiological factors and the potential interactions between PIs and lipid, lipase or lipid digested products on the in vivo performance of su-SEDDSs. In particular, several considerations relating to the properties of PIs are discussed from various perspectives.

Supersaturated lipid-based drug delivery systems – exploring impact of lipid composition type and drug properties on supersaturability and physical stability

Objective: The objective of this study was to systematically investigate the impact of lipid composition on the ability to design supersaturated lipid-based drug delivery systems (sLBDDS) using three model drugs with different physico-chemical properties. Significance: This study expands the list of investigated sLBDDS by using alternative vehicle compositions relative to current literature. Methods and results: Drug supersaturation was thermally-induced based on previously reported methods and was successfully achieved for celecoxib and cinnarizine. For the novel drug, JNJ-2A, a lower supersaturation potential was observed for the tested LBDDS. For celecoxib and cinnarizine, crystalline precipitate was observed for some sLBDDS upon storage at 25 °C/65%RH, particularly for medium chain sLBDDS (celecoxib) and long chain sLBDDS (cinnarizine). The greater risk of precipitation observed for celecoxib and cinnarizine, particularly at higher apparent degree of supersaturation (aDS) may be related to their higher crystallization tendency as determined by differential scanning calorimetry. Conclusions: The potential for supersaturation in LBDDS, and the risk of precipitation, was found to be highly drug dependent. The apparent degree of supersaturation was considered a major factor impacting the ability to maintain drug supersaturation upon storage.

Elucidation of alginate-drug miscibility on its crystal growth inhibition effect in supersaturated drug delivery system

The objective of this study is to investigate the influence of drug-alginate miscibility on maintaining drug supersaturation. Using lovastatin, indomethacin, itraconazole as model drugs, drug-alginate miscibility was estimated by Hansen solubility parameters. The mechanism of drug-alginate miscibility on maintaining drug supersaturation was elucidated by microscopy, molecular mobility (T2), FTIR and X-ray crystallography. The influence of alginate properties on maintaining drug supersaturation was also examined. It was demonstrated that the capacity of alginate to maintain drug supersaturation was dependent on alginate-drug miscibility. Further mechanistic study revealed that alginate interacts with drugs via hydrogen bonding at different extent based on varied drug-alginate miscibility. Alginate could suppress drug molecular mobility and corresponding crystal growth inhibition. The properties of alginate also play an important role in maintaining drug supersaturation. In conclusion, alginate could be used as a potential crystal growth inhibitor, and the crystal growth inhibition effect depends on drug-alginate miscibility and alginate properties.

Inhibiting or Accelerating Crystallization of Pharmaceuticals by Manipulating Polymer Solubility.

Polymers play a central role in controlling the crystallization of pharmaceuticals with effects as divergent as amorphous form stabilization and the acceleration of crystallization. Here, using pyrazinamide and hydrochlorothiazide as model pharmaceuticals, it is demonstrated that the same functional group interactions are responsible for these opposing behaviors and that whether a polymer speeds or slows a crystallization can be controlled by polymer solubility. This concept is applied for the discovery of polymers to maintain drug supersaturation in solution: the strength of functional group interactions between drug and polymer is assessed through polymer-induced heteronucleation, and soluble polymers containing the strongest-interacting functional groups with drug are shown to succeed as precipitation inhibitors.

The role of sodium alginate on the supersaturation state of the poorly soluble drug chlorthalidone

Solid dispersions (SDs) of chlorthalidone (CTD) are promising systems to enhance drug dissolution rate, generate and maintain drug supersaturation levels in gastrointestinal fluids. In this work, SDs of CTD were prepared by spray drying using sodium alginate (SA) as carrier. Six formulations were prepared, varying the drug loading and composition, through the combination of SA with surfactants (sodium lauryl sulfate (SLS) or polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (SOL)). In all SDs, except when SA was used alone at low drug loading, CTD was in the amorphous form. At sink conditions, all SDs showed a faster dissolution rate than the crystalline drug. At non-sink conditions, the SDs prepared with SA and SLS at low drug loading exhibited the best performance to maintain supersaturating drug levels. All SDs, except those prepared with SA alone or SA-SLS at high drug loading, presented no drug recrystallization after 34 months of storage.

A high-sensitivity HPLC-ELSD method for HPMC-AS quantification and its application in elucidating the release mechanism of HPMC-AS based amorphous solid dispersions

Hydroxypropyl methylcellulose acetate succinate (HPMC-AS) is one of the most widely used polymers used in amorphous solid dispersions (ASD) for solubility and bioavailability enhancement of poorly water-soluble drugs. Once released from ASDs, HPMC-AS was often found to be highly effective in maintaining drug supersaturation, and this capability is dependent on the concentration and substitution types of this pH-dependent polymer. Therefore, accurate quantification of different grades of HPMC-AS allows us to better understand the release and supersaturation mechanisms of HPMC-AS based ASDs. Since previously reported analytical methods were unable to quantify HPMC-AS in a complex medium with enough sensitivity, we hereby developed a high-sensitivity HPLC-ELSD (evaporative light scattering detector) method with satisfactory specificity, linearity, accuracy and precision, to quantify HPMC-AS down to 20 μg/mL in dissolution media, with the presence of various commonly used pharmaceutical excipients. With the assistance of this method, we compared the intrinsic dissolution rates (IDR) of both the drug and the polymer of posaconazole ASDs based on different types of HPMC-AS. We observed that: 1) For ASDs that were spray dried and uniformly mixed, drug and polymer released simultaneously into the medium with practically identical IDRs slower than the IDR of pure HPMC-AS; 2) For ASDs that were heterogeneously mixed, IDRs of the drug and polymer were significantly slower or faster than the IDRs of the drug and polymer of the uniform ASDs, respectively. In summary, the high sensitivity HPLC-ELSD method established here can be readily applied to quantify HPMC-AS in various dissolution media, thus helps to reveal the release kinetics and mechanisms of different HPMC-AS based ASDs.

Advances in Polymer Design for Enhancing Oral Drug Solubility and Delivery.

Synthetic polymers have enabled amorphous solid dispersions (ASDs) to emerge as an oral delivery strategy for overcoming poor drug solubility in aqueous environments. Modern ASD products noninvasively treat a range of chronic diseases (for example, hepatitis C, cystic fibrosis, and HIV). In such formulations, polymeric carriers generate and maintain drug supersaturation upon dissolution, increasing the apparent drug solubility to enhance gastrointestinal barrier absorption and oral bioavailability. In this Review, we outline several approaches in designing polymeric excipients to drive interactions with active pharmaceutical ingredients (APIs) in spray-dried ASDs, highlighting polymer-drug formulation guidelines from industrial and academic perspectives. Special attention is given to new commercial and specialized polymer design strategies that can solubilize highly hydrophobic APIs and suppress the propensity for rapid drug recrystallization. These molecularly customized excipients and hierarchical excipient assemblies are promising toward informing early-stage drug-discovery development and reformulating existing API candidates into potentially lifesaving oral medicines for our growing global population.

Enhanced Performance of Blended Polymer Excipients in Delivering a Hydrophobic Drug through the Synergistic Action of Micelles and HPMCAS.

Blends of hydroxypropyl methylcellulose acetate succinate (HPMCAS) and dodecyl (C12)-tailed poly(N-isopropylacrylamide) (PNIPAm) were systematically explored as a model system to dispense the active ingredient phenytoin by rapid dissolution, followed by the suppression of drug crystallization for an extended period. Dynamic and static light scattering revealed that C12-PNIPAm polymers, synthesized by reversible addition-fragmentation chain-transfer polymerization, self-assembled into micelles with dodecyl cores in phosphate-buffered saline (PBS, pH 6.5). A synergistic effect on drug supersaturation was documented during in vitro dissolution tests by varying the blending ratio, with HPMACS primarily aiding in rapid dissolution and PNIPAm maintaining supersaturation. Polarized light and cryogenic transmission electron microscopy experiments revealed that C12-PNIPAm micelles maintain drug supersaturation by inhibiting both crystal nucleation and growth. Cross-peaks between the phenyl group of phenytoin and the isopropyl group of C12-PNIPAm in 2D 1H nuclear Overhauser effect (NOESY) spectra confirmed the existence of drug-polymer intermolecular interactions in solution. Phenytoin and polymer diffusion coefficients, measured by diffusion-ordered NMR spectroscopy (DOSY), demonstrated that the drug-polymer association constant increased with increasing local density of the corona chains, coincident with a reduction in C12-PNIPAm molecular weight. These findings demonstrate a new strategy for exploiting the versatility of polymer blends through the use of self-assembled micelles in the design of advanced excipients.

Theoretical and experimental investigation of drug-polymer interaction and miscibility and its impact on drug supersaturation in aqueous medium

Amorphous solid dispersions (ASDs) have the potential to offer higher apparent solubility and bioavailability of BCS class II drugs. Knowledge of the solid state drug-polymer solubility/miscibility and their mutual interaction are fundamental requirements for the effective design and development of such systems. To this end, we have carried out a comprehensive investigation of various ASD systems of dipyridamole and cinnarizine in polyvinylpyrrolidone (PVP) and polyacrylic acid (PAA) at different drug loadings. Theoretical and experimental examinations (by implementing binary and ternary Flory-Huggins (F-H) theory) related to drug-polymer interaction/miscibility including solubility parameter approach, melting point depression method, phase diagram, drug-polymer interaction in the presence of moisture and the effect of drug loading on interaction parameter were performed. The information obtained from this study was used to predict the stability of ASDs at different drug loadings and under different thermal and moisture conditions. Thermal and moisture sorption analysis not only provided the composition-dependent interaction parameter but also predicted the composition dependent miscibility. DPM-PVP, DPM-PAA and CNZ-PAA systems have shown molecular level mixing over the complete range of drug loading. For CNZ-PVP, the presence of a single Tg at lower drug loadings (10, 20 and 35%w/w) indicates the formation of solid solution. However, drug recrystallization was observed for samples with higher drug weight fractions (50 and 65%w/w). Finally, the role of polymer in maintaining drug supersaturation has also been explored. It has been found that drug-polymer combinations capable of hydrogen-bonding in the solution state (DPM-PVP, DPM-PAA and CNZ-PAA) are more effective in preventing drug crystallization compared to the drug-polymer systems without such interaction (CNZ-PVP). The DPM-PAA system outperformed all other ASDs in various stability conditions (dry-state, in the presence of moisture and in solution state), which was attributed to the drug’s low crystallization tendency, the strong DPM-PAA interaction, the robustness of this interaction against moisture or water and the ability of PAA in maintaining DPM supersaturation.

The effect of surfactants on the dissolution behavior of amorphous formulations

The optimal design of oral amorphous formulations benefits from the use of excipients to maintain drug supersaturation and thus ensures adequate absorption during intestinal transit. The use of surfactants for the maintenance of supersaturation in amorphous formulations has not been investigated in detail. The main aim of this study was to investigate the effect of surfactant on the dissolution behavior of neat amorphous drug and binary polymer based solid dispersion. Indomethacin was used as the model drug and the surfactants studied were polysorbate 80 and poloxamer 407. The presence of surfactants (alone or in combination with polymers) in the buffer was detrimental to the dissolution of neat amorphous indomethacin, suggesting that the surfactants promoted the crystallization of neat amorphous indomethacin. In contrast, the presence of surfactants (0.01% w/v) in the buffer resulted in a significant improvement on the dissolution behavior of binary polymer based solid dispersion. Incorporating the surfactant to the formulation to form ternary solid dispersion adversely affected the dissolution behavior. In conclusion, the use of surfactants (as wetting or solubilization agents) in dissolution studies of neat amorphous drugs requires prudent consideration. The design of amorphous formulations with optimal dissolution performance requires the appropriate selection of a combination of excipients and consideration of the method of introducing the excipients.

Improving Oral Bioavailability of Sorafenib by Optimizing the "Spring" and "Parachute" Based on Molecular Interaction Mechanisms.

Sorafenib is a clinically important oral tyrosine kinase inhibitor for the treatment of various cancers. However, the oral bioavailability of sorafenib tablet (Nexavar) is merely 38-49% relative to the oral solution, due to the low aqueous solubility of sorafenib and its relatively high daily dose. It is desirable to improve the oral bioavailability of sorafenib to expand the therapeutic window, reduce the drug resistance, and enhance patient compliance. In this study, we observed that the solubility of sorafenib could be increased ∼50-fold in the coexistence of poly(vinylpyrrolidone-vinyl acetate) (PVP-VA) and sodium lauryl sulfate (SLS), due to the formation of PVP-VA/SLS complexes at a lower critical aggregation concentration. The enhanced solubility provided a faster initial sorafenib dissolution rate, analogous to a forceful "spring" to release drug into solution, from tablets containing both PVP-VA and SLS. However, SLS appears to impair the ability of PVP-VA to act as an efficient "parachute" to keep the drug in solution and maintain drug supersaturation. Using 2D (1)H NMR, (13)C NMR, and FT-IR analysis, we concluded that the solubility enhancement and supersaturation of sorafenib were achieved by PVP-VA/SLS complexes and PVP-VA/sorafenib interaction, respectively, both through molecular interactions hinged on the PVP-VA VA groups. Therefore, a balance between "spring" and "parachute" must be carefully considered in formulation design. To confirm the in vivo relevance of these molecular interaction mechanisms, we prepared three tablet formulations containing PVP-VA alone, SLS alone, and PVP-VA/SLS in combination. The USP II in vitro dissolution and dog pharmacokinetic in vivo evaluation showed clear differentiation between these three formulations, and also good in vitro-in vivo correlation. The formulation containing PVP-VA alone demonstrated the best bioavailability with 1.85-fold and 1.79-fold increases in Cmax and AUC, respectively, compared with the formulation containing SLS only, the poorest performing one. Despite its forceful "spring", the formulation containing both PVP-VA and SLS showed a moderate bioavailability enhancement, due to the lack of an efficient "parachute".