In the manufacturing industry, most of the components are made by machining operations. The performance of the product to a large extent is dependent on the accuracy and consistency of the machining processes. Various parameters are considered to achieve the high quality of the machining. Out of which, vibration is one of the important parameters that will lead poor quality of the product and also reduce the tool life. Vibrations are induced by metal cutting operation during machining. Turning operations and especially boring operations are associated with severe vibration-related problems. Boring operation is often done with a boring bar, which is necessarily long and slender so that it can fit into the multipart work piece geometry. Such tools are lack of dynamic stiffness and stability, this manufacturing operation is repeatedly plagued with self-excited vibrations known as chatter. Magnetorheological (MR) fluid is employed in this research work to control the vibration of a boring tool. The MR fluid damper has received great attention due to its ability to reversibly change from a free flowing, linear, viscous liquid to a semi-solid when exposed to magnetic fields in just a few milliseconds and was also found to be effective in suppressing tool vibration. Vibration control during machining process is an important tactic to suppress the chatter vibration. The aim of this approach is to reduce the relative displacements between the tool and the work piece during the machining process.