Magnetic Noise Research Articles

Magnetic Barkhausen Noise: Aspects of Generation and Modeling

The Magnetic Barkhausen noise (MBN) techniquemeasures discrete changes in magnetization, known as“Barkhausen jumps”, whi ch can be seen as steps i n the hysteresis curve. When a ferro-magnetic material issubjected to an external varying magnetic field, themagnetization of the material wil l change in a non-linearway. These changes in magnetization are described by thehysteresis curve and are the result of modifications of domain structure of the material. Changes in magnetizationare caused by domain wall creation, domain wallannihilation, domain wall motion and rotation. In order toimprove the interpretation of Barkhausen noise, models areneeded which describe the dependence of magnetization on material properties.

Evaluation of Welding Current Impact on Residual Stresses Status in Ship-Building Steel Weldments Using Barkhausen Noise

The paper intends to determine the relationship between heat input and the residual stresses distribution in shipbuilding steel weldments using the Magnetic Barkhausen Noise (MBN) technique. The rate of fusion during welding was controlled by amount and time of fusion for a given weld bead width. Barkhausen noise measurements were performed parallel to the weld bead at the back of the plates welded using variable welding currents along the line that crosses the weld bead. The heat affected zones were differentiated by a variation in MBN peak height. The high welding current was characterized by high MBN amplitude compared with the medium and the low currents. The results showed that the heat affected zone was narrower with high welding current and increases with decreasing current. The results indicate that residual stresses introduced in steel by welding could be mapped nondestructively by magnetic Barkhausen noise

Analytical model of magnetic Barkhausen noise testing on surface-modified ferromagnetic plates with stress distributions

Surface treatment is a critical technology in engineering that enhances the mechanical properties of materials, in which the stress state within the material and the thickness of the surface modification layer are essential for optimizing performance. Magnetic Barkhausen Noise (MBN) serves as an effective nondestructive evaluation technique for ferromagnetic structures. In this work, we develop an analytical model that incorporates the attenuation mechanism of the MBN signal strength, and the strength of the stress-induced magnetic Barkhausen excitation (MBE) as determined by the magneto-mechanical constitutive law of the material. The proposed theoretical model can accurately characterize the MBN signal influenced by internal stresses and surface modification layers, as confirmed by comparison with existing experimental results. The theoretical analysis shows the influence of internal stress fields, layer dimensions, and electromagnetic properties on the MBN signal, revealing a positive relationship between signal intensity and the thickness of surface modification layer and the magnitude of internal stresses. This research provides a valuable reference for interpreting MBN signals and evaluating internal stress distributions for surface-modified ferromagnetic plates.

Evaluation of Welding Current Impact on Residual Stresses Status in Ship-Building Steel Weldments Using Barkhausen Noise

The paper intends to determine the relationship between heat input and the residual stresses distribution in shipbuilding steel weldments using the Magnetic Barkhausen Noise (MBN) technique. The rate of fusion during welding was controlled by amount and time of fusion for a given weld bead width. Barkhausen noise measurements were performed parallel to the weld bead at the back of the plates welded using variable welding currents along the line that crosses the weld bead. The heat affected zones were differentiated by a variation in MBN peak height. The high welding current was characterized by high MBN amplitude compared with the medium and the low currents. The results showed that the heat affected zone was narrower with high welding current and increases with decreasing current. The results indicate that residual stresses introduced in steel by welding could be mapped nondestructively by magnetic Barkhausen noise.

Influence of ionospheric resonators on daily dynamics of the first Schumann resonance spectral parameters according to data from a meridional chain of ULF magnetometers

We have experimentally studied the influence of the local ionosphere, namely the ionospheric Alfvén resonator (IAR) and the lower ionospheric resonator at altitudes 80–300 km (sub-IAR) on the amplitude and polarization of the first Schumann resonance. The study is based on spectral analysis of data from simultaneous monitoring of ULF magnetic noise components at a meridional chain of stations: high-latitude stations Barentsburg and Lovozero, mid-latitude observatory NNGU NIRFI (NL, Nizhny Novgorod Region), a low-latitude station in Israel. We have also used monitoring data from the Borok and Crete observatories. At the stations in dark conditions, significant variations were found in the spectrum of the polarization parameter ε at the frequency of the first Schumann resonance (SR). Moreover, these variations had different character at different observatories. Analysis of the daily dynamics of the parameter ε has shown that these variations are associated with the influence of local sub-IAR having different optical thickness and quality factor at these observatories. The influence of sub-IAR on polarization in the SR band was found to depend on the ratio of the boundary frequency fb (the frequency that separates the negative and positive polarization of ULF magnetic noise) to the frequency of the first SR. The IAR influence on the polarization and amplitude of magnetic fields in the frequency band of the first Schumann resonance was discovered only at the NL and Lovozero stations: a high-quality Alfvén resonator in the ionosphere above the NL station could cause the SR frequency band to change and its central frequency to shift. Analysis of low-frequency data from the observatories separated by distances of 400 km has revealed that the influence of local ionospheric resonators can lead to a difference in the amplitude characteristics of the first SR even at such distances. It has also been shown that the influence of the IAR and sub-IAR resonators on the azimuthal angle of the magnetic field vector in the frequency band of the first SR is less noticeable and can generate variations in this parameter by 10°–20°. Numerical calculations performed for the spherical waveguide model made it possible to adequately interpret the features of the daily dynamics of the parameter ε in the frequency range of the first SR.

Влияние ионосферных резонаторов на суточную динамику спектральных параметров первого шумановс-кого резонанса по данным меридиональной сети УНЧ-магнито-метров

We have experimentally studied the influence of the local ionosphere, namely the ionospheric Alfvén resonator (IAR) and the lower ionospheric resonator at altitudes 80–300 km (sub-IAR) on the amplitude and polarization of the first Schumann resonance. The study is based on spectral analysis of data from simultaneous monitoring of ULF magnetic noise components at a meridional chain of stations: high-latitude stations Barentsburg and Lovozero, mid-latitude observatory NNGU NIRFI (NL, Nizhny Novgorod Region), a low-latitude station in Israel. We have also used monitoring data from the Borok and Crete observatories. At the stations in dark conditions, significant variations were found in the spectrum of the polarization parameter ε at the frequency of the first Schumann resonance (SR). Moreover, these variations had different character at different observatories. Analysis of the daily dynamics of the parameter ε has shown that these variations are associated with the influence of local sub-IAR having different optical thickness and quality factor at these observatories. The influence of sub-IAR on polarization in the SR band was found to depend on the ratio of the boundary frequency fb (the frequency that separates the negative and positive polarization of ULF magnetic noise) to the frequency of the first SR. The IAR influence on the polarization and amplitude of magnetic fields in the frequency band of the first Schumann resonance was discovered only at the NL and Lovozero stations: a high-quality Alfvén resonator in the ionosphere above the NL station could cause the SR frequency band to change and its central frequency to shift. Analysis of low-frequency data from the observatories separated by distances of 400 km has revealed that the influence of local ionospheric resonators can lead to a difference in the amplitude characteristics of the first SR even at such distances. It has also been shown that the influence of the IAR and sub-IAR resonators on the azimuthal angle of the magnetic field vector in the frequency band of the first SR is less noticeable and can generate variations in this parameter by 10°–20°. Numerical calculations performed for the spherical waveguide model made it possible to adequately interpret the features of the daily dynamics of the parameter ε in the frequency range of the first SR.

Effect of Pre-Weld Sand Blasting on Residual Stress Distribution in Ship Steel Using Magnetic Barkhausen Noise Technique

This paper aims at investigating the effect of preweldsandblasting on residual stresses distribution in shipsteel plates using magnetic Barkhausen noise (MBN)technique. The measurements have been conducted along aline crossing the weld as a function of distance from theweld bead at the back of the plate. Four tests have beenperformed in the experiment in four conditions. The asreceived,sand blasted, as received-welded and the sandblasted–welded plates are tested. The as-received plateshows a statistically constant Barkhausen noise levelindicative of the specimen processing history. The sandblasted plate shows a similar Barkhausen noise behavior butof lower intensity. The welded specimen shows a pattern ofthe Barkhausen response characteristic of the heat affectedzone (HAZ) as a result of residual stresses redistribution.The sand blasted-welded specimen shows also a similarpattern but of lower intensity. The difference in the inducedsignals is attributed to the impedance and accumulation ofresidual compressive stresses due to sandblasting. The resultindicates that the resultant residual tensile stresses at theheat affected zone could be reduced by using pre-weldsandblasting process.

Research on unbalanced characteristics of axial-varying eccentric rotor based on signal demodulation

In the presence of non-uniform loads, rotor misalignment emerges as a prevalent fault in permanent magnet synchronous motors (PMSMs), leading to the manifestation of an axial-varying eccentric air–gap. Considering the three-dimensional (3D) nature of magnetic flux under axial-varying eccentric fault, 3D finite element (FE) analysis method was used in this paper. Then, the electromagnetism simulations were conducted to calculate the magnetic flux density and unbalanced magnetic pull (UMP). With the signal demodulation algorithm based on principal component analysis (DPCA), the frequency modulation of various signals from simulation and experiment was extracted. Furthermore, based on the modulation features, the relevance among magnetic flux density, UMP, and vibration acceleration was established with shaft frequency as the link. The coupling of magnetic field and vibration level shown in results was analysis, which provide important theoretical and engineering references for the safe operation of PMSM system and the exact identification of rotor tilting faults.

NbTiN SQUID-on-tip fabricated by self-aligned deposition using reactive DC magnetron sputtering

We fabricate superconducting quantum interference devices (SQUIDs) made of niobium-titanium nitride (NbTiN) thin films on the apex of sharp quartz capillaries. By incorporating reactive DC magnetron sputtering into the self-aligned deposition process for the SQUID-on-tip (SOT) fabrication, we produce NbTiN SOT devices with an effective diameter of ∼100 nm. The ø110 nm device has a superconducting transition temperature of 13.2 K, magnetic flux noise down to 0.7 μΦ0/Hz0.5 (4 K), and operating temperatures of 1.8–10 K. The developed technique enables the synthesis of nitride and other superconductors, thereby expanding the range of materials available for SOT devices.

Analysis of electromagnetic vibration of IPM motor based on vector control for electric propulsion ships

AbstractAn overall investigation of the electromagnetic force, vibration, and average torque of the Interior Permanent Magnet Synchronous Motors (IPMSM) in the dq model for electric propulsion ships is carried out, and the electromagnetic vibration characteristics of the PMSM under the vector control strategy is explored. Firstly, the space and frequency characteristics of the electromagnetic force of the dq model motor are derived using the Maxwell stress tensor method, and the influence of the dq‐axes magnetic field on the electromagnetic force under different loads is discussed in detail. Secondly, the finite element method is used to verify the influence of dq‐axes currents on motor electromagnetic force, vibration, and average torque. Finally, the experiments are conducted on an 8‐pole 48‐slot IPMSM, and the results are consistent with the theoretical analysis and simulation results. The results indicate that the electromagnetic vibration of the PMSM for electric propulsion ships increases with the increase of the current iq and decreases with the increase of the current id. The electromagnetic vibration of the motor can be reduced by selecting the appropriate dq‐axes current under the output torque constraint.

Early‐Precambrian crystalline basement beneath the Upper Yangtze Block from regional aeromagnetic anomalies: Depth from extreme points approach

AbstractAlthough the early‐Precambrian crystalline basement is now only sporadically exposed in the northern and south‐western parts of the Yangtze Block, it is supposed to have a widespread distribution beneath its Neoproterozoic and Phanerozoic covers. Here we present results of regional aeromagnetic data processing in consideration of remanent magnetization to investigate the spatial distribution of the early‐Precambrian basement buried deep under the Upper Yangtze Block and surrounding areas. The direct analytic signal amplitude of the aeromagnetic anomalies, which is less affected by the magnetization direction, reveals a broader basement below the Sichuan Basin, extending far north to the Micang Mountain. A comparison between the direct analytic signal amplitude with the reduction to the pole aeromagnetic anomalies indicates that possible remanent magnetization exists beneath the Micang Mountain near the boundary between the Qinling Orogen and Sichuan Basin. The automatic depth from extreme points transform is then performed on the direct analytic signal amplitude to estimate the depth to the early‐Precambrian crystalline basement. A synthetic model of a magnetic interface with remanent magnetization and random noise shows that the depth from extreme points method is able to resolve variable basement depths. Application of the depth from extreme points method to the direct analytic signal amplitude of the Upper Yangtze Block presents meaningful results about the early‐Precambrian crystalline basement undulations. It is shallow and uplifted beneath the Sichuan Basin, extending north to the Qinling‐Dabie Orogen, probably corresponding to the ancient Chuanzhong palaeo‐uplift. Although it gradually deepens to the east, the deepest basement is buried under the Jiangnan Orogen, which is likely associated with the collision‐induced crustal thickening between the Yangtze and Cathaysia blocks during the assembly of the Columbia supercontinent. Large gas fields around the Sichuan Basin are found at the slopes or depressions between basement uplifts, indicating that the deep marine carbonate rocks in the south and east of Sichuan Basin, particularly those located at the slopes or depressions between ancient basement uplifts, are favourable targets for further petroleum exploration.

Superconducting Quantum Magnetometer Based on Flux Focusing Effect for High-Sensitivity Applications.

A superconducting quantum magnetometer for high-sensitivity applications has been developed by exploiting the flux focusing of the superconducting loop. Unlike conventional dc SQUID magnetometers that use a superconducting flux transformer or a multiloop design, in this case, a very simple design has been employed. It consists of a bare dc SQUID with a large washer-shaped superconducting ring in order to guarantee a magnetic field sensitivity BΦ less than one nT/Φ0. The degradation of the characteristics of the device due to an inevitable high value of the inductance parameter βL was successfully compensated by damping the inductance of the dc SQUID. The size of the magnetometer, coinciding with that of the washer, is 5 × 5 mm2 and the spectral density of the magnetic field noise is 8 fT/√Hz with a low frequency noise knee of two Hz. The excellent performance of this simple magnetometer makes it usable for all high-sensitivity applications including magnetoencephalography.

Phase-Slip Based SQUID Used as a Photon Switch in Superconducting Quantum Computation Architectures

The photon storage time in a superconducting coplanar waveguide (CPW) resonator is contingent on the loaded quality factor, primarily dictated by the input and output capacitance of the resonator. The phase-slip based superconducting quantum interference device (PS-SQUID) comprises two phase-slip (PS) junctions connected in series with a superconducting island in between. The PS-SQUID can manifest nonlinear capacitance behavior, with the capacitance finetuned by the gate voltage to minimize the impact of magnetic field noise as much as possible. By substituting the coupling capacitance of the CPW resonator with the PS-SQUID, the loaded quality factor of the resonator can be changed by three orders, thus, we get a microwave photon switch in superconducting quantum computation architectures. Furthermore, by regulating the loaded quality factors, the coupling strength between the CPW and superconducting quantum circuits can be controlled, enabling the ability to manipulate stationary qubits and flying qubits.

Modeling and Analysis of Magnetic Noise Characteristics of Permalloy–Nanocrystalline Magnetic Shielding Devices

Modeling and Analysis of Magnetic Noise Characteristics of Permalloy–Nanocrystalline Magnetic Shielding Devices

Interplay between magnetic gap and quasi-particle lifetime in topological insulator ferromagnet/f-wave superconductor junctions

Using the modified Blonder–Tinkham–Klapwijk (BTK) theory, the interplay between the lifetime of quasi particles and the magnetic gap in a topological insulator-based ferromagnet/f-wave superconductor (TI-based FM/f–wave SC) tunnel structure is theoretically studied. Two symmetries of f 1 and f 2 waves are considered for superconducting pairing states. The results indicate that reducing the finite quasi-particle lifetime will induce a transformation of energy-gap peaks into a zero-bias peak in tunneling conductance spectrum, as well as a transformation of energy-gap dips into a zero-bias dip in shot noise spectrum, ultimately resulting in the smoothing of the zero-bias conductance peak and the zero-bias shot noise dip. An increase in magnetic gap will suppress the tunnel conductance and shot noise when the conventional Andreev retro-reflection dominates, but will enhance them when the specular Andreev reflection is dominant. Both specular Andreev reflection and conventional Andreev retro-reflection will be enhanced as the quasi-particle lifetime increases. When Fermi energy equals the magnetic gap, shot noise and tunneling conductance vanish across all energy ranges. These findings not only contribute to a better understanding of specular Andreev reflection in the FM/f–wave SC junction based on TIs but also provide insights for experimentally determining the f-wave pairing symmetry.

Full-Permutation Dynamical Decoupling in Triple-Quantum-Dot Spin Qubits

Dynamical decoupling of spin qubits in silicon can increase fidelity and can be used to extract the frequency spectra of noise processes. We demonstrate a full-permutation dynamical decoupling technique that cyclically exchanges the spins in a triple-quantum-dot qubit. This sequence not only suppresses both low-frequency charge-noise-induced and magnetic-noise-induced errors; it also refocuses leakage errors to first order, which is particularly interesting for encoded exchange-only qubits. For a specific construction, which we call “NZ1y,” the qubit is isolated from error sources to such a degree that we measure a remarkable exchange pulse error of 2.8×10−5. This sequence maintains a quantum state for roughly 18,000 exchange pulses, extending the qubit coherence from T2∗=2μs to T2=720μs. We experimentally validate an error model that includes 1/f charge noise and 1/f magnetic noise in two ways: by direct exchange-qubit simulation and by integration of the assumed noise spectra with derived filter functions, both of which reproduce the measured error and leakage with respect to a change of the repetition rate. Published by the American Physical Society 2024

Copper permalloys for fluxgate magnetometer sensors

Abstract. Fluxgate magnetometers are commonly used to provide high-fidelity vector magnetic field measurements. The magnetic noise of the measurement is typically dominated by that intrinsic to a ferromagnetic core used to modulate (gate) the local field as part of the fluxgate sensing mechanism. A polycrystalline molybdenum–nickel–iron alloy (6.0–81.3 Mo permalloy) has been used in fluxgates since the 1970s for its low magnetic noise. Guided by previous investigations of high-permeability copper–nickel–iron alloys, we investigate alternative materials for fluxgate sensing by examining the magnetic properties and fluxgate performance of that permalloy regime in the range 28 %–45 % Cu by weight. Optimizing the alloy constituents within this regime enables us to create fluxgate cores with both lower noise and lower power consumption than equivalent cores based on the traditional molybdenum alloy. Racetrack geometry cores using six layers of ∼30 mm long foil washers consistently yield magnetic noise around 4–5 pT/Hz at 1 Hz and 6–7 pT/Hz at 0.1 Hz, meeting the 2012 1 s INTERMAGNET standard of less than 10 pT/Hz noise at 0.1 Hz.

Ударное возбуждение магнитоупругой системы периодической последовательностью сверхкоротких импульсов поля

The nonlinear magnetization precession in normal magnetized ferrite film which has magnetic, elastic and magnetoelastic properties is investigated. The excitation field is presented as a vibration on resonance frequency which is modulated by short pulses which frequency is more lower than resonance frequency. It is proposed the formation procedure of periodic succession of ultra-short pulses by the involution to even degree of modulation signal sine. It is found two different cases of excitation: first when modulate pulse duration is larger than initial signal period and second when modulate pulse duration is smaller than initial signal period. In the first case the modulated signal has the form of main frequency vibrations tandem and in the second case the modulated signal has the form of unit sign-variation pulse. It is investigated the time development of magnetic and elastic vibrations whish are firmed by excitation field. It is shown that in the first case the magnetization vibrations at first hat sharp jump to upward and after this decreases by exponent. In this case the elastic vibrations after the same jump at first increases and then decreases by exponent. The elastic vibrations behaviour is interpret as energy pump from magnetic system to elastic system. In the second case the initial jump both vibrations is absent. It is investigated the degree modulation index influence to excited vibrations. It is shown that by increasing of this index the amplitude of magnetic and elastic vibrations decreases. It is investigated the magnetization excited vibrations character by different degree of magnetoelastic connection. It is introduced the coefficient multiple of magnetoelastic constant which is equal to ratio of considered constant to value of magnetoelastic constant of yttrium iron garnet. It is shown that by increasing of multiple coefficient the magnetization vibrations period is increased. It is found the sharp increasing the period by determined value of multiple coefficient which has a threshold character. It is investigated the excitation of magnetization in large time interval when the multiple coefficient is above the threshold value. It is found the principle difference between two cases when pulse duration is large or smaller as alternating field period. It is shown that in the first case the magnetization vibrations has the character of equilibrium position precession in conditions of orientational transition. In the second case the magnetization vibrations has the form of periodic re-orientational jumps from one equilibrium position to another. It is mentioned some properties of observed phenomena and proposed some recommendations for further investigations.

Electromagnetic noise characteristics analysis and noise traceability in induction motor

Abstract To investigate the electromagnetic vibration and noise issues in induction motors, this study employs a combined methodology of experimental, theoretical, and simulation approaches to analyze the characteristics of electromagnetic noise. Initially, a theoretical analysis of the radial electromagnetic force of the motor is conducted, followed by a simulation of the motor’s electromagnetic vibration and noise at a working condition of 3000 rpm, incorporating a Multiphysics coupled analysis of electromagnetic-vibration-noise. Vibration testing on a specific compressor motor reveals that the primary vibration noise characteristic frequency is centered around 2000 Hz. A comparison between simulation and experimental results shows a high degree of congruence, indicating the reliability of the simulation method. Subsequently, an acoustic camera kit, Brüel & Kjær PULSE Reflex, based on a beamforming method, is employed for noise source identification and acoustic holography testing at 3000 rpm, which successfully localizes the noise sources. The analysis and experiments provided herein can serve as a reference for the development of electromagnetic vibration noise suppression techniques in induction motors.

Evaluation of the wear mechanism of ferromagnetic materials based on magnetic barkhausen noise

ABSTRACT As a typical form of damage, wear greatly affects the service properties of products, and non-destructive evaluation of the degree of wear is urgently needed. In this paper, the wear degree of AISI 1045 steel was evaluated by magnetic Barkhausen noise (MBN) testing. The root mean square (RMS) and full width at half maximum (FWHM) of MBN were extracted to establish the quantitative relationships between the tribological indicators and the stress state. The results indicate that the RMS decreases linearly and the FWHM increases quadratically with increasing tribological indicators, which can distinguish among different wear stages, including abrasive, adhesive and fatigue wear. However, the RMS shows a complicated nonlinear relation with the residual stress during the wear process. In addition, the MBN energy parameter is also calculated to reveal the features of the hysteresis loop at the wear scar. Both the coercivity H c and the maximum magnetic permeability μ max are linearly related to the tribological indicators and quadratically related to the stress, which reflects the effect of tribo-magnetisation on the MBN signals. The variation mechanism of MBN under different wear stages is attributed to the combined effect of plastic deformation and the stress state by microstructure observations.