Temperature Dependence Of Magnetization Research Articles

Exploring magnetic transitions in the FeIn2xCr2-2xS4 semiconductor system through Electron spin resonance

Electron spin resonance (ESR) was employed to investigate the effects of composition and temperature on the FeIn2xCr2-2xS4 semiconductor system. The samples were synthesized using Chemical Vapor Transport (CVT), and their structural characteristics were analyzed through X-ray diffraction and Scanning Electron Microscopy (SEM). For magnetic characterization, magnetization curves M(H) and temperature-dependent magnetization curves M(T) were obtained under both zero-field and field cooling conditions. A paramagnetic behavior was observed for all samples above 180 K, transitioning to a potential long-range spin-glass-like behavior below this temperature. By comparing the results with those presented in the literature, we suggest a reentrant spin glass behavior for the samples with higher Cr concentration. The Electron spin resonance (ESR) spectra revealed asymmetric signals indicative of strong magnetic anisotropies. The inverse of the normalized area in the ESR spectra revealed three distinct regions above the Néel temperature; this observation is consistent with the sensitivity of the lattice parameters of indite. The study elucidates the intricate magnetic behaviors influenced by composition and temperature in the FeIn2xCr2-2xS4 semiconductor system, contributing to a deeper understanding of the material’s properties. This comprehensive investigation, utilizing a range of analytical techniques, advances our knowledge of the system’s magnetic characteristics and provides valuable insights for future research in related semiconductor materials.

Structural and Magnetic Transformations from CuCl to Cu2Cl(OH)3 Induced by H2O and CuCl2

This study explores the oxidation dynamics of “pure” CuCl during prolonged environmental exposure through X-ray diffraction and temperature-dependent magnetization assessments. While CuCl is traditionally considered diamagnetic, our investigation reveals the emergence of an antiferromagnetic transition at 4.7 K. This anomaly is potentially induced by the integration of water molecules into the CuCl matrix. The hydration process initiates a series of oxidation reactions, ultimately transmuting CuCl into Cu2Cl(OH)3. Over time, the distinctive diffractogram peaks corresponding to CuCl diminish, concurrently with the appearance and intensification of those ascribed to Cu2Cl(OH)3, culminating in a complete phase transition as confirmed by X-ray analysis. Correspondingly, magnetization measurements clearly discern magnetic transitions at 6.4 and 16 K, intensifying with the sample’s exposure duration. These findings illuminate the stark potential for probing the magnetic intricacies of Cu2Cl(OH)3, a subject that remains a compelling and unresolved intrigue within the field.

Reduced internal stress of quasi-single crystalline Na4Fe3(PO4)2P2O7 electrode enhancing sodium-ion kinetics

A NASICON-type quasi-single crystalline Na4Fe3(PO4)2P2O7 (SC) cathode material was successfully synthesized via a freeze-drying method. The as-optimized SC sample displays both outstanding rate performance (107.9 and 88.5 mAhg−1 at 0.1C and 5C, respectively) and excellent cycling stability (88.1 % of capacity retention after 1000 cycles at 1C). Reduced sodium ion migration path of as-prepared SC cathode material effectively enhanced the kinetics of Na+ upon cycling. More importantly, the SC structure could suppress nearly 50 % of internal strain, prodigiously reducing the local stress accumulation accompanied by the inhomogeneous sodium concentration gradient during the charging/discharging processes. The smaller the stress accumulation, the more stable the crystal structure would be obtained, which maintained a more superb mechanical stability of the SC cathode material. At the same time, a high-spin state of Fe in the SC sample was confirmed by both of electron paramagnetic resonance and temperature-dependent magnetization susceptibility, indicating that the eg orbital occupation of Fe2+ could be regulated to optimize the bond strength between the reduction and oxidation processes. As a consequence, the band gap of SC material has decreased from 1.66 to 1.45 eV, and the electronic conductivity has increased from 6.0 to 32.4 μS/cm. It is believed that the SC cathode material could be a competitive candidate material for sodium ion batteries.

Optimizing the curie temperature of La0.67Sr0.33MnO3–based composite materials around room temperature through the addition of Mo, Mn, and Ni metallic elements

Our study sheds light on the role of secondary phases in optimizing the magnetic properties of LSMO, offering valuable insights into the relationship between impurity phases, Curie temperature (TC), and magnetic entropy change. To achieve this goal, the Mn, Ni, and Mo elements were individually incorporated into the LSMO matrix to the formation of secondary phases. The solid-state reaction method was employed to create composite materials of (0.8)La0.67Sr0.33MnO3 + (0.2)A (A=Mn, Ni, and Mo). XRD and SEM results confirmed the successful formation of impurity phases within the main LSMO phase. From temperature-dependent magnetization (M(T)) measurements, it was determined that the TC of the samples approach towards room temperature with the existence of impurity phases. Additionally, the relationship between electron bandwidth (W) and TC was examined. The lowest TC value was observed for the lowest value of W. Besides these, the effect of the formation of impurity phases on the maximum magnetic entropy change (-ΔSMmax\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$-\\Delta {S}_{M}^{max}$$\\end{document}) value is examined, and it is seen that impurity phases cause a decrease in the (-ΔSMmax)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$(-\\Delta {S}_{M}^{max})$$\\end{document} values.

Fine tuning of Mn/Co vacancies for optimized magnetocaloric performance in MnCoGe alloys

As a family of rare-earth-free magnetocaloric materials, MnCoGe-based alloys have attracted intensive attention in the past few years. In this study, we reveal that the deficiency of either Mn or Co reduces the valence electron concentration of MnCoGe system, thereby lowering its structural transition temperature (Ttr) by pushing the Fermi level away from the Mn-Mn antibonding electronic states. Moreover, Ttr is found to be more sensitive to Co content. By systematically analyzing the temperature dependent magnetization plots and Arrott curves, it is proven that the magnetic and structural degrees of freedom are coupled in the Mn0.97CoGe alloy, resulting in a first-order magnetic phase transition. On the contrary, MnCo0.98Ge undergoes a second-order transition. As a consequence, the Mn0.97CoGe alloy exhibits a maximum magnetic entropy change of 27.6 J kg−1K−1 under a magnetic field of 5 T near the Curie temperature of 265 K, corresponding to a refrigeration capacity of 212.1 J kg−1. Our work demonstrates Mn/Co vacant MnCoGe alloy as a robust candidate of magnetic substance for room temperature magnetocaloric refrigeration.

Effects of Mg Substitution on the Structural with Rietveld Analysis, Magnetic and Magnetocaloric Properties of Ni-Cu-Cd Bulk Ceramics

Bulk ceramics with optimized density are highly prioritized over ferrite nanoparticles to fabricate devices for their optimal magnetic saturation, lower coercivity, and anisotropy, enhanced resistance, etc. To achieve such bulk specimen using Ni0.5-yMgyCu0.2Cd0.3Fe2O4 disc samples are sintered at 1423 K keeping the heating and cooling rate at 10 K and 5 K respectively. In due course, structural as well as theoretical Rietveld analysis, optical, and magnetic properties have been analyzed using these bulk samples. XRD has explored structural properties and after that these values have analyzed with the Rietveld refinement procedure and obtained goodness of χ2 (1–2) value and other parameters such as lattice parameters, crystal structures, cation distribution, and maximum entropy mapping. Surface morphology and grain size have examined from the as-grown surface without further polishing and annealing by electron microscopy and revealed a decreasing trend of grain size 6.1 µm to 4.2 µm. UV–Vis spectroscopy characterization ensured optical properties for bulk as well as nanopowders and the band gap has been found in the range of 1.4 to 1.6 eV and is increasing with Mg content. Magnetic hysteresis loop exhibits a less decreasing nature up to y = 0.3 of magnetic saturation along with the Law of Approach to saturation which compiles magnetic anisotropy. The temperature-dependent magnetization curves exhibit a sharp decreasing value (i.e. dM/dT maximum) at Curie point, decreasing from 630 K to 505 K with increasing Mg content. At.3 T magnetic field the changes in relative cooling power value have been found in the range 53.82Jkg-1 to 37.79Jkg-1 which could be considered as potential for magnetocaloric refrigeration.

Strong influence of magnetic field and non-uniform stress on elastic modulus and transition temperatures of twinned Ni–Fe(Co)–Ga alloy

The magnetization value and electric resistivity of the single-crystalline sample of Ni50Fe19Co4Ga27 shape memory alloy were measured. The elastic modulus was determined by the Dynamic Mechanical Analysis (DMA). The characteristic temperatures of martensitic transformation (MT) of the alloy were estimated from the temperature dependences of magnetization, electric resistivity and elastic modulus. A significant disparity between MT temperatures resulting from DMA and those estimated from magnetic and resistivity measurements was discovered. It was argued that the discrepancy is caused by the non-uniform mechanical stressing of twinned single crystal by the DMA analyzer. Moreover, the DMA measurements revealed a significant decrease of the elastic modulus of twinned martensite under the applied magnetic field of 1.5 kOe. To explain this effect, the temperature-dependent Young’s modulus of twinned crystal lattice was computed. The computations showed that the experimentally observed field-induced change of the elastic modulus is caused by the stress-assisted detwinning of the crystal lattice by the applied magnetic field.

On Correlation between the Temperature Dependence of Magnetization and the Structure of Aurivillius Phases Bim+1Fem–3Ti3O3m+3

On Correlation between the Temperature Dependence of Magnetization and the Structure of Aurivillius Phases Bim+1Fem–3Ti3O3m+3

Temperature dependent interfacial-coupling and magnetization reversal of La2/3Sr1/3MnO3 film with inverted hysteresis features

Temperature-dependent magnetic anisotropy and interfacial coupling of La2/3Sr1/3MnO3 (LSMO) epitaxial films with inverted hysteresis (IHLs) features are investigated using a broadband ferromagnetic resonance (FMR) spectrometer. Through the dispersion relation obtained along [100], [110] and [010] axes, a simplified method is proposed to investigation in-plane magnetic anisotropy by broadband FMR in a cryostat. According to this method, the perpendicular uniaxial anisotropy, magneto-crystalline anisotropy, and interfacial coupling between the LSMO film and hard-magnetic interface layer are investigated as a whole. The measured value of interfacial coupling is −17.6 Oe at 300 K, close to the bias field found in minor loop, i.e., −18.4 Oe. The interfacial coupling is enhanced with the dropping of temperatures, and the value of interfacial coupling changed to −112 Oe at 10 K. A Stoner-Wohlfarth-like model is employed to calculate the hysteresis loops of the films based on the measured values of in-plane magnetic anisotropy and interfacial-coupling. The calculation reveals the mechanism of magnetization reversal and the origin of IHLs found in LSMO films.

Sperimagnetic states in amorphous Gd x (FeCo)1-x (0.2 ≤ x ≤ 0.3) alloys: insights from stochastic magnetic anisotropy analysis

Materials crucial for the advancement of magnetic recording technologies stand as pivotal elements in the development of a new generation of recording devices. Recent advancements in the manipulation of magnetization through laser pulses have underscored the significance of magnetic materials exhibiting robust magneto-optical properties. This study explores the manifestation of a sperimagnetic state in ferrimagnetic amorphous Gd x (FeCo)1−x alloys utilizing a stochastic magnetic anisotropy approach. Phase diagrams ‘magnetic field’-‘temperature’ and temperature dependencies of magnetization and compensation point were calculated using the mean-field approximation for temperature range from 50 to 700 K and different stoichiometry of the alloy, namely 0.2 ≤ x ≤ 0.3. Accounting for the stochastic anisotropy intrinsic to rare earth ions, a distribution of magnetic moments within the amorphous solid is discerned. Notably, this distribution predominantly manifests at the fringes of a canted phase, constituting the sperimagnetic structure. We demonstrate a direct correlation between an increased variance in normally distributed anisotropy constants of rare earth ions and a corresponding augmentation in the standard deviation of magnetization within the sperimagnetic structure. These findings not only contribute to a deeper understanding of the interplay between material composition and magnetic properties but also provide valuable insights for the advancement of magnetic recording technologies.

Trapped flux in a small crystal of CaKFe4As4 at ambient pressure and in a diamond anvil pressure cell

In an extension of our previous work, (Bud’ko et al 2023 Supercond. Sci. Technol. 36 115001) the measurements of temperature dependent magnetization associated with trapped magnetic flux in a small single crystal of CaKFe4As4, using zero—field—cooled and field—cooled protocols were performed, on the same crystal, at ambient pressure without a pressure cell and at 2.2 GPa in a commercial diamond anvil cell (DAC), showing comparable results. The data show that with a proper care and understanding, trapped flux measurements in superconductors indeed can be performed on samples in DACs under pressure, as was done on superhydrides (Minkov et al 2023 Nat. Phys. 19 1293).

Element-specific Curie temperatures and Heisenberg criticality in ferrimagnetic Gd6(Mn1−xFex)23 via Kouvel-Fisher analysis

Many large unit-cell rare-earth transition metal ternary alloys of the type Ra(M1−xM’x)b exhibit non-monotonic ferrimagnetic Curie temperatures (TC) coupled to monotonic composition-controlled magnetization. Its origin remains an important long-standing puzzle in the absence of studies probing their temperature-dependent element-specific magnetism. Here, in order to resolve this issue and identify design principles for new R-M-M’ permanent magnets, we carry out x-ray magnetic circular dichroism (XMCD) for the series Gd6(Mn1−xFex)23, x = 0.0 − 0.75. The results show that the net Mn-moment reduces and switches from parallel to antiparallel for x ≥ 0.2, while the Fe-moment is always antiparallel to the Gd-moment. Kouvel-Fisher analyses of XMCD data reveals distinct sublattice TC’s and 3D Heisenberg criticality. Band structure calculations show magnetic moments and density of states consistent with experiments. The magnetic phase diagram shows three regions characterized by (i) Mn-sublattice bulk-TC > Gd-sublattice TC, (ii) a reduced common-TC for all sublattices, and (iii) Fe-sublattice bulk-TC > Gd-sublattice TC. The Mn-moment switching and gradual increase of Fe-moment combine to cause non-monotonic TC’s with monotonic magnetization. The study indicates the importance of element-specific TC’s for tuning magnetic properties.

First-order phase transition in perovskites Pr0.67Sr0.33MnO3 – magneto-caloric properties – effect of multi-spin interaction

We show by extensive Monte Carlo simulations that we need a multi-spin interaction in addition to pairwise interactions in order to reproduce the temperature dependence of the experimental magnetization observed in the perovskite compound Pr0.67Sr0.33MnO3. The multi-spin interaction is introduced in the Hamiltonian as follows: each spin interacts simultaneously with its four nearest-neighbors. It does not have the reversal invariance as in a pairwise interaction where reversing the directions of two spins leaves the interaction energy invariant. As a consequence, it competes with the pairwise interactions between magnetic ions. The multi-spin interaction allows the sample magnetization M to increase, to decrease or to have a plateau with increasing T. In this paper we show that M increases with increasing T before making a vertical fall at the transition temperature TC, in contrast to the usual decrease of M with increasing T in most of magnetic systems. This result is in an excellent agreement with the experimental data observed in Pr0.67Sr0.33MnO3. Furthermore, we show by the energy histogram taken at TC that the transition is clearly of first order. We also calculate the magnetic entropy change |ΔSm| and the Relative Cooling Power (RCP) by using the set of curves of M obtained under an applied magnetic field H varying from 0 to 5 T across the transition temperature region. We obtain a good agreement with experiments on |ΔSm| and the values of RCP. This perovskite compound has a good potential in refrigeration application due to its high RCP.

Алгоритм определения намагниченностей подрешеток двухподрешеточного ферримагнетика с точкой компенсации. Часть 2. Степенное приближение

The calculation algorithm of sublattice magnetizations in two-sublattice ferrimagnet with compensation point is proposed. On the consideration of magnetic as the combination of spin with two orientations it is found the dependence of magnetization from the temperature in the firm of transcendent equation. The calculated decision of this equation make the coincidence the calculated dependence with experiment in precision about 10%. For the analytic presentation of magnetization temperature dependence in obviously view it is proposed the power index approximation which consist of relation magnetic temperature to curie temperature in six power index. On the basis of power index approximation the phase diagram of two-sublattice ferrimagnet with compensation point is constructed. It is shown the scheme of sublattice magnetization determination on the basis of using meanings by temperature character points of phase diagram lower branch. It is found the equation system which connects the character points parameters with magnetizations in initial point and in the point of maximum of diagram in the temperature more than compensation. By solving this equation system it is found the enough simple analytical expressions which determine the saturation magnetizations both sublattices through parameters of character points on lower brunch of phase diagram. The proposed methods is applied to determination of sublattice magnetizations in experiments by measuring summary magnetization which are curried out on the films of two different compositions using the vibration magnetometer. For the examination of determined meanings the comparison with constructed on its basis phase diagram with the diagram determined in experiment was carried out. The examination shows the coincidence calculated data with experiment in limits from 8 to 40%. The analysis of correspondence determined diagram data with experimental data. It is found the good (to part of percent) coincidence of whole magnetization meaning in the beginning of diagram and also the coincidence of compensation temperature and Curie temperature. For the interpretation of visible deflections it is proposed the hypothesis about influence of third sublattice which changes the magnetizations of main sublattices. It is proposed some recommendations for further development of investigations.

Mössbauer and magnetization measurements of multicomponent iron garnets

Four Gd-containing iron garnets were investigated using Mössbauer spectroscopy and Vibrating Sample Magnetometry over a wide temperature range, from 4K to ∼600K. The magnetic ordering temperature and hyperfine parameters determined on the basis of Mössbauer spectra for all samples were found to be surprisingly similar, differences were only noted for the average magnetic moments, which turned out to be strongly correlated with the magnetic moments of rare earth elements present in the structure. Further differences between the systems were also highlighted in measurements in the external 9T magnetic field, especially around the compensation temperature. Changes in the nature of the Mössbauer spectra were interpreted based on the crystal field approximation confirming the correctness of the interpretation of the temperature dependence of magnetization for these samples.

Tau-borides (Mnx{Ru,Os,Ir}1-x)23B6: X-ray single crystal and TEM data, physical properties

Investigation (electron microprobe and X-ray powder and single crystal diffraction analyses) of the phase relations in the Mn-rich corner (> 45 at% Mn) of the systems Mn-{Ru,Os,Ir}-B, prompted in all three systems a ternary compound with formula (Mnx{Ru,Os,Ir}1-x)23B6. For the systems Mn-Ru-B, Mn-Ir-B phase equilibria have been determined at 950°C (Ru), 900°C (Ir) revealing in both cases a small homogeneity region at constant B-content (Mn1-xRux)23B6 (0.29 < x < 0.37); (Mn1-xOsx)23B6 (0.33 < x < 0.37), as well as (Mn1-xIrx)23B6 (0.29 < x < 0.34). The crystal structure of the three compounds was determined from single crystal and X-ray powder intensity data analyses to be isotypic with the Cr23B6-type (so-called tau-phase, space group Fm3¯m, No. 225). In all cases Mn atoms fully occupy the 4a site (0,0,0) at the origin of the unit cell. For the 8c site (¼,¼,¼) we observed a random distribution of Mn1-x(PM)x with decreasing PM content (PM stands for a platinum group metal atom) going from Ru to Os and Ir, where Mn atoms fully occupy 8c. Whereas the remaining sites (48h, 32f) show various ratios of the two metal species, boron atoms fully occupy the centers (24e site) of the Archimedean metal atom antiprisms. A transmission electron microscopic study confirms the absence of superstructures related to these metal atom disorder, thus Mn and PM atoms randomly share their sites. The latter is well reflected in the behavior of the electrical resistivity of these compounds, which is dominated by disorder scattering. For (Mn0.6{Ru,Os}0.4)23B6, temperature dependent dc magnetization studies reveal distinct antiferromagnetic-like anomalies at TN ≅ 72 K and 114 K, respectively. Low field dc and ac magnetic susceptibility data of (Mn0.7Ir0.3)23B6 display a distinct ferromagnetic-like transition at TC = 280 K, consistent with a pronounced specific heat anomaly and a rather continuous temperature dependent evolution of magnetic anisotropy effects. Mechanical properties (hardness) characterize the tau phases among rather hard and brittle intermetallics (about 5–6 GPa).

Plant-Mediated Synthesis of Magnetite Nanoparticles with Matricaria chamomilla Aqueous Extract.

Magnetite nanoparticles (NPs) possess properties that make them suitable for a wide range of applications. In recent years, interest in the synthesis of magnetite NPs and their surface functionalization has increased significantly, especially regarding their application in biomedicine such as for controlled and targeted drug delivery. There are several conventional methods for preparing magnetite NPs, all of which mostly utilize Fe(iii) and Fe(ii) salt precursors. In this study, we present a microwave hydrothermal synthesis for the precipitation of magnetite NPs at temperatures of 200 °C for 20 min and 260 °C for 5 min, with only iron(iii) as a precursor utilizing chamomile flower extract as a stabilizing, capping, and reducing agent. Products were characterized using FTIR, PXRD, SEM, and magnetometry. Our analysis revealed significant differences in the properties of magnetite NPs prepared with this approach, and the conventional two-precursor hydrothermal microwave method (sample MagH). FTIR and PXRD analyses confirmed coated magnetite particles. The temperature and magnetic-field dependence of magnetization indicate their superparamagnetic behavior. Importantly, the results of our study show the noticeable cytotoxicity of coated magnetite NPs-toxic to carcinoma cells but harmless to healthy cells-further emphasizing the potential of these NPs for biomedical applications.

Anomalous Current Steps in 3D Graphene Electrochemical Systems at Room Temperature.

In this work, we report a new phenomenon in electrochemical systems whereby uniform current steps of 1 mA per 0.5 × 0.5 × 0.1 cm3 (width × width × depth) of electrode volume occurred during the electrodeposition of gold and silver nanoparticles onto 3D microporous graphene on nickel layers (GF/Ni) at room temperature. The effect was exhibited only at specific applied electrical potentials. The experiments (magnetic interference, temperature dependence, and surface area dependence) were repeated, and the results were reproducible. Finally, we proposed classical electrochemical theory using the Butler-Volmer equation and quantum theory using the Landauer formalism to describe this new effect. Both theories could be used to explain the experimental results: temperature dependence, surface area dependence, blocking effects, and external magnetic field dependence. In addition, the stepwise current presented in this work facilitates the trapping and supplying of a large amount of electric charge via an inherent magnetic field in a sharp time step (∼1 s). A video clip of the recorded effect can be found at https://youtu.be/pPJh45w1sUQ.

Effects of Cr doping and size reduction on the structural and magnetic properties of α–CoV2O6

We report the effect of Cr-doping on the structural and magnetic properties of powder α–CoV2O6 samples. Samples were synthesized using a wet chemical synthesis method and calcined at temperatures between 350 ℃ and 500 ℃ to promote phase formation. For α–CoV2O6 and Cr-doped α–CoV2O6 samples, a single phase only occurs when the samples are calcined at 450 ℃ and 500 ℃, respectively, as confirmed using powder x-ray diffraction (XRD). Cr-doping results in a compression distortion of the lattice along the c-axis. Transmission electron microscopy (TEM) measurements indicate that Cr-doping causes a reduction in particle size and particle agglomeration. Metamagnetism was observed in field dependence of magnetization, M(μ0H) for α–Co(V1−xCrx)2O6 samples with 0 ≤ x ≤ 0.05. The hysteresis in M(μ0H) curves for μ0H < 5 T at 2 K indicate that the magnetization is metastable and suggests magnetic irreversibility. Zero-field-cooled (ZFC) and field-cooled (FC) temperature dependence of magnetization, M(T), show antiferromagnetic (AFM) ordering of the α–Co(V1−xCrx)2O6 samples at fields, μ0H ≤ 1 T. Increasing field strength to 2.5 T causes a transition from the AFM state to a ferrimagnetic (FI) state, and an introduction of spin-glass (SG)-like behavior. At 5 T, a transition from the FI state to a ferromagnetic (FM) state and a suppression of SG-like behavior is observed.

Evidence of Ferromagnetism and Ultrafast Dynamics of Demagnetization in an Epitaxial FeCl2 Monolayer.

The development of two-dimensional (2D) magnetism is driven not only by the interest of low-dimensional physics but also by potential applications in high-density miniaturized spintronic devices. However, 2D materials possessing a ferromagnetic order with a relatively high Curie temperature (Tc) are rare. In this paper, the evidence of ferromagnetism in monolayer FeCl2 on Au(111) surfaces, as well as the interlayer antiferromagnetic coupling of bilayer FeCl2, is characterized by using spin-polarized scanning tunneling microscopy. A Curie temperature (Tc) of ∼147 K is revealed for monolayer FeCl2, based on our static magneto-optical Kerr effect measurements. Furthermore, temperature-dependent magnetization dynamics is investigated by the time-resolved magneto-optical Kerr effect. A transition from one- to two-step demagnetization occurs as the lattice temperature approaches Tc, which supports the Elliott-Yafet spin relaxation mechanism. The findings contribute to a deeper understanding of the underlying mechanisms governing ultrafast magnetization in 2D ferromagnetic materials.