Magnetic Structure Research Articles

Effect of Surface Oxidation and Crystal Thickness on the Magnetic Properties and Magnetic Domain Structures of Cr2Ge2Te6.

van der Waals (vdW) magnetic materials, such as Cr2Ge2Te6 (CGT), show promise for memory and logic applications. This is due to their broadly tunable magnetic properties and the presence of topological magnetic features such as skyrmionic bubbles. A systematic study of thickness and oxidation effects on magnetic domain structures is important for designing devices and vdW heterostructures for practical applications. Here, we investigate thickness effects on magnetic properties, magnetic domains, and bubbles in oxidation-controlled CGT crystals. We find that CGT exposed to ambient conditions for 5 days forms an oxide layer approximately 5 nm thick. This oxidation leads to a significant increase in the oxidation state of the Cr ions, indicating a change in local magnetic properties. This is supported by real-space magnetic texture imaging through Lorentz transmission electron microscopy. By comparing the thickness-dependent saturation field of oxidized and pristine crystals, we find that oxidation leads to a nonmagnetic surface layer that is thicker than the oxide layer alone. We also find that the stripe domain width and skyrmionic bubble size are strongly affected by the crystal thickness in pristine crystals. These findings underscore the impact of thickness and surface oxidation on the properties of CGT, such as saturation field and domain/skyrmionic bubble size, and suggest a pathway for manipulating magnetic properties through a controlled oxidation process.

Magnetic domain structures in ultrathin Bi2Te3/CrTe2 heterostructures

Abstract Chromium tellurium compounds are important two-dimensional van der Waals ferromagnetic materials with high Curie temperature and chemical stability in air, which is promising for applications in spintronic devices. Here, high-quality spin-orbital-torque (SOT) device, Bi2Te3/CrTe2 heterostructure was epitaxially grown on Al2O3 (0001) substrates. Anomalous Hall measurements indicate the existence of strong ferromagnetism in this device with the CrTe2 thickness down to 10 nm. In order to investigate its micromagnetic structure, cryogenic magnetic force microscope (MFM) was utilized to measure the magnetic domain evolutions at various temperatures and magnetic fields. The virgin domain state of the device shows a worm-like magnetic domain structure with the size around 0.6 ~ 0.8 µm. Larger irregular-shape magnetic domains (＞1µm) can be induced and pinned, after the field is increased to coercive field and ramped back to low fields. The temperature-dependent MFM signals exhibit a nice mean-field-like ferromagnetic transition with Curie temperature around 201.5 K, indicating a robust ferromagnetic ordering. Such device can be potentially implemented in future magnetic memory technology.

Magnetically Active Bicontinuous Polymer Structures for Multiple Controlled Drug Delivery.

The targeted delivery of drugs using wireless navigable magnetic robots, allows the delivery of drug molecules to be controlled non only in time but also in space, improving medical outcomes. The main disadvantages behind their use lies in the low amount of drug that can be transported and the single nature of drug that can be loaded (hydrophilic or hydrophobic). These considerations limit their use in co-delivery systems, now recognized to be very promising for many different pathologies. We developed a magnetic bijel-like structure to load and release different types of molecules (hydrophilic and hydrophobic). In this work, we explored the use of ε-caprolactone, which can polymerize, forming hydrophobic domains (oil phase). After mixing with iron oxide nanoparticles (NPs), the water dispersion creates a magnetic biphasic porous structure without phase separation. The resulting device showed good performance both in magnetic actuation and as a drug delivery system. This article is protected by copyright. All rights reserved.

A Human-Scale Clinically-Ready Electromagnetic Navigation System for Magnetically-Responsive Biomaterials and Medical Devices.

Magnetic navigation systems are used to precisely manipulate magnetically responsive materials enabling the realization of new minimally invasive procedures using magnetic medical devices. Their widespread applicability has been constrained by high infrastructure demands and costs. we report on a portable electromagnetic navigation system, the Navion, which is capable of generating a large magnetic field over a large workspace. The system is easy to install in hospital operating rooms and transportable through healthcare facilities, aiding in the widespread adoption of magnetically responsive medical devices. First, we introduce our design and implementation approach for the system and characterize its performance. Next, we demonstrate in vitro navigation of different microrobot structures using magnetic field gradients and rotating magnetic fields. Spherical permanent magnets, electroplated cylindrical microrobots, microparticle swarms, and magnetic composite bacteria-inspired helical structures are investigated. we also demonstrate the navigation of magnetic catheters in two challenging endovascular tasks: (1) an angiography procedure and (2) deep navigation within the circle of Willis. Catheter navigation is demonstrated in a porcine model in vivo to perform an angiography under magnetic guidance. This article is protected by copyright. All rights reserved.

Strain-induced giant enhancement and transformation of magnetocrystalline anisotropy in 1T-FeSe2 monolayer

Abstract The development of magnetic materials with large magnetic anisotropy energy (MAE) is crucial for magnetic storage and spintronics applications. The electronic structure and magnetic properties of 1T-FeSe2 monolayer have been systematically investigated by first-principles computational methods. The monolayer 1T-FeSe2 is confirmed to be a ferromagnetic semimetal with 100% spin polarization and exhibits pronounced magnetic anisotropy. It shows an easy magnetization plane in the two-dimensional plane and its MAE is as high as 8.13 meV. The MAE mainly originates from the contributions of transitions between Fe d_yz and d_(z^2 ), d_xyand d_(〖x^2-y〗^2 ) orbitals, while the contributions of transitions between px and py, px and pz orbitals of Se are also obvious. The biaxial strain significantly regulates the magnetic properties and electronic structures of the 1T-FeSe2 monolayer. Interestingly, the MAE increases significantly to 77.68 meV when the tensile strain increases to 3.5%, we can expect to achieve a reasonable value of MAE up to 98.95 meV by applying 5% tensile strain. In addition, the easy magnetization plane changes to perpendicular easy magnetization axis direction at -6% compressive strain or 7% tensile strain, which leads to a significant change in the band structure near the Fermi level. The 100% spin-polarized ferromagnetic semi-metallic behavior and the huge strain-induced magnetic anisotropy make the 1T-FeSe2 monolayer material promising for spintronics and magnetic data storage.

The Interplay of Electronic Configuration and Anion Ordering on the Magnetic Behavior of Hydroxyfluoride Diaspores.

We report a new nickel hydroxyfluoride diaspore Ni(OH)F prepared using hydrothermal synthesis from NiCl2·6H2O and NaF. Magnetic characterization reveals that, contrary to other reported transition-metal hydroxyfluoride diaspores, Ni(OH)F displays weak ferromagnetism below the magnetic ordering temperature. To understand this difference, neutron diffraction is used to determine the long-range magnetic structure. The magnetic structure is found to be distinct from those reported for other hydroxyfluoride diaspores and shows an antiferromagnetic spin ordering in which ferromagnetic canting is allowed by symmetry. Furthermore, neutron powder diffraction on a deuterated sample, Ni(OD)F, reveals partial anion ordering that is distinctive to what has previously been reported for Co(OH)F and Fe(OH)F. Density functional theory calculations show that OH/F ordering can have a directing influence on the lowest energy magnetic ground state. Our results point toward a subtle interplay between the sign of magnetic exchange interactions, the electronic configuration, and anion disordering.

Design of smart magnetic thin-sheet structure based wireless sensors-array arrangement for intraoral-pressure sensing approach

During orthodontic treatments, orthodontists want to simultaneously measure different kinds of intraoral pressure of a patient to determine a suitable orthodontic treatment plan for the patient. To achieve this, an intraoral pressure sensors-array with a specific arrangement in the oral cavity is needed. Hence, in this paper, we design a smart magnetic thin-sheet structure based wireless sensors-array arrangement for intraoral-pressure sensing for orthodontics to determine the above suitable treatment plan. In general, the sensors-array consists of multiple sensing modules. Each module consists of two parts: the first part is a transmitting/receiving electromagnet which is connected to a reference electromagnet in a balanced inductance bridge configuration while the second part is a smart magnetic thin-sheet structure based high-permeable sensing diaphragm. A voltage input is applied to the reference electromagnet and transmitting/receiving electromagnet, while the voltage output is measured from the transmitting/receiving electromagnet, respectively (the transmitting/receiving electromagnet can transmit the magnetic flux as well as receive or sense the change of magnetic flux). When the sensing diaphragm (which is placed in proximity to the transmitting/receiving electromagnet) undergoes a displacement, the gap between the sensing diaphragm and transmitting/receiving electromagnet changes. This subsequently changes surrounding magnetic flux, and consequently results in a change in magnetic reluctance between the sensing diaphragm and transmitting/receiving electromagnet. Thus, the voltage output of the transmitting/receiving electromagnet is changed accordingly. Based on this operation principle, furthermore, we use multiple transmitting/receiving electromagnets to form a compact (specifically arranged) sensors-array. The results show that specifically arranged sensors-array can provide measurement results in multiple points in the oral cavity to the orthodontists, as a simplified decision-making reference for the orthodontists to determine the clinical treatment plan for patients.

Imaging Thermally Fluctuating Néel Vectors in van der Waals Antiferromagnet NiPS3.

Studying antiferromagnetic domains is essential for fundamental physics and potential spintronics applications. Despite their importance, few systematic studies have been performed on antiferromagnet (AFM) domains with high spatial resolution in van der Waals (vdW) materials, and direct probing of the Néel vectors remains challenging. In this work, we found multidomain states in the vdW AFM NiPS3, a material extensively investigated for its unique magnetic exciton. We employed photoemission electron microscopy combined with the X-ray magnetic linear dichroism (XMLD-PEEM) to image the NiPS3's magnetic structure. The nanometer-spatial resolution of XMLD-PEEM allows us to determine local Néel vector orientations and discover thermally fluctuating Néel vectors that are independent of the crystal symmetry even at 65 K, well below the TN of 155 K. We demonstrate that an in-plane orbital moment of the Ni ion is responsible for the weak magnetocrystalline anisotropy. The observed thermal fluctuations of the antiferromagnetic domains may explain the broadening of magnetic exciton peaks at higher temperatures.

EMISSA: Exploring millimetre indicators of solar-stellar activity III. Comparison of Ca II indices and millimetre continua in a 3D model atmosphere

Amongst several spectral lines, some of the strongest chromospheric diagnostics are offered by the Ca II H K lines. These lines can be used to gauge the temperature stratification of the atmosphere since the line core and wings are formed in different regions of the solar atmosphere. Furthermore, the Ca II lines act as tracers for the magnetic structure of the solar atmosphere, as the line cores are formed in the upper chromosphere even though they are formed in non-local thermodynamic equilibrium (NLTE). In contrast, the formation of millimetre (mm) continuum radiation occurs under local thermodynamic equilibrium (LTE) conditions. As a result, the brightness temperatures obtained from observations with the Atacama Large Millimetre/Submillimetre Array (ALMA) offer a complementary perspective on the activity and thermal structure of stellar atmospheres. The overall aim is to establish more robust solar/stellar activity indicators using ALMA observations in comparison with classical diagnostics, such as the s index and infrared triplet (IRT) index. We employed the 1.5D radiative transfer codes RH1.5D and advanced radiative transfer (ART) to compute the synthetic spectra for the Ca II lines and the millimetre (mm) continua, respectively. These calculations were performed using an enhanced network atmosphere model, which incorporates non-equilibrium hydrogen ionisation generated by the state-of-the-art 3D radiation magnetohydrodynamics (rMHD) Bifrost code. To account for the limited spatial resolution of ALMA, we simulated the effect using a Gaussian point spread function (PSF). Additionally, we analysed the correlations and slopes of scatter plots between the Ca II indices and mm continuum for the original and degraded resolutions, focusing on the entire simulation box, quiet Sun regions, and enhanced network patches separately. The activity indices generated from these lines could further be used to compare the spectra of Sun-like stars with the solar spectrum. We present a comparative study between synthetic continuum brightness temperature maps at mm wavelengths (0.3 mm to 8.5 mm) and the Ca II activity indices; namely, the s index and infrared triplet (IRT) index. The Ca II activity indices and mm brightness temperatures are weakly correlated at the high resolution, with the highest correlation observed at a wavelength of 0.3 mm, corresponding to ALMA band 10. As the resolution decreases, the correlation consistently increases. Conversely, the slopes exhibit a decreasing trend with increasing wavelength, while the degradation of resolution does not noticeably affect the calculated slopes. As the spatial resolution decreases, the standard deviations of the Ca II activity indices and brightness temperatures decrease, while the correlations between them increase. However, the slopes do not exhibit significant changes. Consequently, these relationships could be valuable for calibrating the mm continuum maps obtained through ALMA observations.

Effects of 1:5H-type Cu-rich phase around grain boundary on cell boundary phase and squareness of the demagnetization curve in sintered Sm2Co17-type magnets

The unique cellular structure of Sm2Co17-type magnets is responsible for their outstanding magnetic properties. However, the cell boundary phase around grain boundaries is few, and cannot form a complete cellular structure. This study explores the microstructure and microchemistry of the grain interiors and grain boundary regions in both the solid solution precursor and the final magnet. The Cu-rich phase precipitates around grain boundaries in the solid solution precursor, and it remains present in the final magnet. The Cu-rich phase is not present as a standalone grain boundary phase, rather, it possesses a hexagonal CaCu5-type crystal structure and demonstrates a coherent orientation relationship with the surrounding matrix. The Cu-rich phase inhibits cellular structure formation nearby, while boosting Cu content in the cell boundary phase at the grain boundary regions in the final magnet. The formation of a Cu-rich phase around the grain boundary increases the heterogeneity of the domain wall pinning field in the final magnet, becoming an unfavorable factor for the improvement of the squareness of the demagnetization curve. These discoveries enhance our comprehension of the precipitated phase surrounding the grain boundary and its impact on the cellular structure and magnetic characteristics of the magnet.

Magnetic field density concentrated permanent magnet structure for electromagnetic MEMS scanning mirror

The study investigates the inadequacy of driving torque in large-diameter Micro-electro Mechanical Systems Electromagnetic Scanning Mirrors (MEMS-ESM) and introduces fresh insights into the power efficiency of traditional MEMS-ESM devices. A novel permanent magnet structure (PMS) and driving principle are devised, drawing upon the phenomenon of concentrated magnetic field density and a custom-designed PMS inner profile. In comparison to L-shaped and I-shaped PMSs, the proposed PMS delivers up to 3.48 times and 3.76 times greater driving torque within the same form factor. Moreover, the optimized proposed PMS has been experimentally proven to reduce power consumption by 53.3% and 81.4% and reduce total driving current by 31.3% and 55.0%, making it the sole solution that conforms to the safe current range. Additionally, the research analyzes the impact of variations in the optical scanning angle on the optimal PMS design. It is noteworthy that the proposed PMS enables the substitution of L-type and I-type PMSs with smaller package sizes, all while preserving torque, thus promoting the miniaturization of MEMS-SM.

Multi-Level Switching of Spin-Torque Ferromagnetic Resonance in 2D Magnetite.

2D magnetic materials hold substantial promise in information storage and neuromorphic device applications. However, achieving a 2D material with high Curie temperature (TC), environmental stability, and multi-level magnetic states remains a challenge. This is particularly relevant for spintronic devices, which require multi-level resistance states to enhance memory density and fulfil low power consumption and multi-functionality. Here, the synthesis of 2D non-layered triangular and hexagonal magnetite (Fe3O4) nanosheets are proposed with high TC and environmental stability, and demonstrate that the ultrathin triangular nanosheets show broad antiphase boundaries (bAPBs) and sharp antiphase boundaries (sAPBs), which induce multiple spin precession modes and multi-level resistance. Conversely, the hexagonal nanosheets display slip bands with sAPBs associated with pinning effects, resulting in magnetic-field-driven spin texture reversal reminiscent of "0" and "1" switching signals. In support of the micromagnetic simulation, direct explanation is offer to the variation in multi-level resistance under a microwave field, which is ascribed to the multi-spin texture magnetization structure and the randomly distributed APBs within the material. These novel 2D magnetite nanosheets with unique spin textures and spin dynamics provide an exciting platform for constructing real multi-level storage devices catering to emerging information storage and neuromorphic computing requirements.

The Effects of Si Substitution with C on the Amorphous Forming Ability, Thermal Stability, and Magnetic Properties of an FeSiBPC Amorphous Alloy

The Effects of Si Substitution with C on the Amorphous Forming Ability, Thermal Stability, and Magnetic Properties of an FeSiBPC Amorphous Alloy

Magnetic structure of Tb[formula omitted]NbO[formula omitted] determined using neutron diffraction experiments and magnetic anisotropy calculations

We determined the magnetic structure of Tb3NbO7 based on powder neutron diffraction experiments and magnetic anisotropy calculations. We calculated the energy levels split by crystalline electric fields, and the magnetic moments using McPhase. The c axis is the easy axis for Tb1 moments, and magnetic anisotropy is small for Tb2 moments. Magnetic reflections were observed at low temperatures. The propagation vector is k1=(0,0,0) at 1.8 K and k2=(1/2,1/2,0) at 2.5 K between transition temperatures TN1=2.0 K and TN2=3.2 K. We selected candidates for an irreducible representation (IR) of the magnetic structures using magnetic anisotropy. From Rietveld refinements, we determined the following: The IRs are mΓ4 and mS2 at 1.8 K and 2.5 K, respectively. The main component of Tb1 ordered moments is w at 1.8 K. The order of the main components in each chain along the c axis is antiferromagnetic. Tb1 moments are disordered at 2.5 K. Tb2 moments form noncollinear magnetic structures in the ab plane perpendicular to Tb1 chains with a small w component at both the 1.8 K and 2.5 K. The magnetic structure at 1.8 K is consistent with the magnetic anisotropies obtained using McPhase calculations. Only Tb2 moments are ordered at 2.5 K, indicating the appearance of a partially disordered state. We also considered the origin of the two magnetic transitions.

Single-step generation of 1D FeCo nanostructures

Magnetic one-dimensional structures are attractive nanomaterials due to the variety of potential applications they can provide. The fabrication of bimetallic 1D structures further expands the capabilities of such structures by tailoring the magnetic properties. Here, a single-step template-free method is presented for the fabrication of 1D FeCo alloy nanochains. In this approach, charged single-crystalline FeCo nanoparticles are first generated by the co-ablation of pure Fe and Co electrodes under a carrier gas at ambient pressures and attracted to a substrate using an electric field. When reaching the surface, the particles are self-assembled into parallel nanochains along the direction of an applied magnetic field. The approach allows for monitoring the self-assembly particle by particle as they are arranged into linear 1D chains with an average length controlled by the deposited particle concentration. Magnetometry measurements revealed that arranging nanoparticles into nanochains results in a 100% increase in the remanent magnetization, indicating significant shape anisotropy. Furthermore, by combining x-ray microscopy and micromagnetic simulations, we have studied the local magnetization configuration along the nanochains. Our findings show that variations in magnetocrystalline anisotropy along the structure play a crucial role in the formation of magnetic domains.

Second harmonic generation in structures with inhomogeneous magnetization distribution

The study of the interaction of laser radiation with ferromagnetic materials is not only an inexhaustible source of new effects, but also provides an opportunity to study magnetic media at the micro- and macroscale. This is especially important for the development of modern technologies to produce structures with fundamentally new magnetic and optical properties that can’t be observed in natural materials. The review presents the results of studies of nonlinear optical effects in ferromagnetic nano- and microstructures, as well as films of different compositions. The unique capabilities of nonlinear-optical diagnostics of anisotropic, vortex, exchange-biased magnetic structures, visualization of the micromagnetic structure of the surface layers of ferrite garnets, based both on the high sensitivity of the optical second harmonic generation method to the magnetic state of nanostructures and interfaces, and on the symmetry properties of high-order magnetizationinduced susceptibility tensor have been demonstrated.

The storage ring of the Compton source of the NCPM

In this paper, the magnetic structure of the storage ring of an X-ray source based on the effect of Compton backscattering and designed for use in the electron beam energy range from 35 MeV to 120 MeV is investigated. For this storage ring, the results of calculating the dynamics of the electron beam are presented and the effects of radiation damping, quantum excitation, laser damping and intrabeam scattering are considered. The dynamic aperture and energy acceptance of this ring are discussed. The results of calculating the magnitude of the spectral brightness of X-ray radiation and its change over time are presented.

Entanglement between Micro-Magnetism, electromagnetism and the tensor magnetic Phase theory (TMPT) – Symmetry, conservation and invariance laws analysis at low frequency

Ferromagnetic materials show magnetic structures with domains and walls. Thanks to decades of research regarding the origin and behaviour of magnetic domains, we now possess a general foundation which has been verified experimentally in single crystals and powders. The governing equations at the microscopic scale were built in the 1960 s when Brown published calculations of the magnetic moments distribution inside domain walls. This micromagnetic theory uses the so called LLG ‘Landau-Lifshitz-Gilbert’ equation and can include the damping effects. The LLG equation requires a coupling to the field derived from energy contributions: exchange, anisotropy, magnetostriction, stray-field … and the anti-eddy field. At the macroscopic scale, such behaviours are lumped in a homogenized magnetization law for the electromagnetic field equations inside larger polycrystals. Therefore, the inhomogeneous magnetic material nature is always ignored. The Tensor Magnetic Phase Theory (TMPT) describes the magnetic structure and the magnetization thanks to a tensor variable at a mesoscopic scale. The material structuring is then explained thanks to an energy balance which will be discussed.This paper presents the results of investigations on entangled relationships between the micromagnetic theory, the electromagnetic theory and what is called the Tensor Magnetic Phase Theory (TMPT), which statistically describes the magnetic structures of soft ferromagnetic materials. It examines a connection between the TMPT and the LLG by deriving the main energy terms. Then, the TMPT must stay compatible and coupled to the Maxwell equations at low frequencies with volume and surface connections. Additionally, this paper investigates the way to derive the domains structuring and magnetization laws through the Lagrange principle and the corresponding conservation laws with invariants linked to the Nœther theorem. Finally, the TMPT must be discussed while checking its coherence and formulation when changing the reference frame.

Earth’s Geomagnetic Environment—Progress and Gaps in Understanding, Prediction, and Impacts

Understanding of Earth’s geomagnetic environment is critical to mitigating the space weather impacts caused by disruptive geoelectric fields in power lines and other conductors on Earth’s surface. These impacts are the result of a chain of processes driven by the solar wind and linking Earth’s magnetosphere, ionosphere, thermosphere and Earth’s surface. Tremendous progress has been made over the last two decades in understanding the solar wind driving mechanisms, the coupling mechanisms connecting the magnetically controlled regions of near-Earth space, and the impacts of these collective processes on human technologies on Earth’s surface. Studies of solar wind drivers have been focused on understanding the responses of the geomagnetic environment to spatial and temporal variations in the solar wind associated with Coronal Mass Ejections, Corotating Interaction Regions, Interplanetary Shocks, High-Speed Streams, and other interplanetary magnetic field structures. Increasingly sophisticated numerical models are able to simulate the magnetospheric response to the solar wind forcing associated with these structures. Magnetosphere-ionosphere-thermosphere coupling remains a great challenge, although new observations and sophisticated models that can assimilate disparate data sets have improved the ability to specify the electrodynamic properties of the high latitude ionosphere. The temporal and spatial resolution needed to predict the electric fields, conductivities, and currents in the ionosphere is driving the need for further advances. These parameters are intricately tied to auroral phenomena—energy deposition due to Joule heating and precipitating particles, motions of the auroral boundary, and ion outflow. A new view of these auroral processes is emerging that focuses on small-scale structures in the magnetosphere and their ionospheric effects, which may include the rapid variations in current associated with geomagnetically induced currents and the resulting perturbations to geoelectric fields on Earth’s surface. Improvements in model development have paralleled the advancements in understanding, yielding coupled models that better replicate the spatial and temporal scales needed to simulate the interconnected domains. Many realizations of such multi-component systems are under development, each with its own limitations and advantages. Challenges remain in the ability of models to quantify uncertainties introduced by propagation of solar wind parameters, to account for numerical effects in model codes, and to handle the special conditions occurring during extreme events. The impacts to technical systems on the ground are highly sensitive to the local electric properties of Earth’s surface, as well as to the specific technology at risk. Current research is focused on understanding the characteristics of geomagnetic disturbances that are important for geomagnetically induced currents, the development of earth conductivity models, the calculation of geoelectric fields, and the modeling of induced currents in the different affected systems. Assessing and mitigating the risks to technical systems requires quantitative knowledge of the range of values to be expected under all possible geomagnetic and technical conditions. Considering the progress that has been made in studying the chain of events leading to hazardous geomagnetic disturbances, the path forward will require concerted efforts to reveal missing physics, improve modeling capabilities, and deploy new observational assets. New understanding should be targeted to accurately quantify solar wind driving, magnetosphere-ionosphere-thermosphere coupling, and the impacts on specific technologies. The research, modeling, and observations highlighted here provide a framework for constructing a plan by which the international science community can comprehensively address the growing threat to human technologies caused by geomagnetic disturbances.

Analysis of Magnetic Domain Structure of Grain-Oriented Electrical Steels Using 2-D Fourier Transform

Analysis of Magnetic Domain Structure of Grain-Oriented Electrical Steels Using 2-D Fourier Transform