Magnetic Force Research Articles

Robin and zero‐mass diffusion analysis for radiated unsteady flow of Maxwell nanofluid due to porous stretched regime: Analytical simulations

AbstractOwing to the multidisciplinary applications of nanomaterials, a wide range of research has been conducted on this topic recently. The aim of current research is to analyze the enhancement of heat transfer due to the unsteady flow of Maxwell nanofluid associated with the zero mass thermal constraints. The applications of the radiated phenomenon and magnetic force are contributed to the current flow problem. The analysis is subject to the implementation of Robin and zero‐mass diffusion constraints. A bidirectional moving porous surface endorsed the flow. The appropriate variables are taken for simplifying the system. The homotopy analysis method (HAM) is used to compute the solution procedure. The obtained results are confirmed with already performed studies. It has been observed that the temperature and nanoparticle concentration distributions decrease for higher unsteady parameter values.

Structure, control, and dynamics of altermagnetic textures

We present a phenomenological theory of altermagnets, that captures their unique magnetization dynamics and allows modeling magnetic textures in this new magnetic phase. Focusing on the prototypical d-wave altermagnets, e.g., RuO2, we can explain intuitively the characteristic lifted degeneracy of their magnon spectra, by the emergence of an effective sublattice-dependent anisotropic spin stiffness arising naturally from the phenomenological theory. We show that as a consequence the altermagnetic domain walls, in contrast to antiferromagnets, have a finite gradient of the magnetization, with its strength and gradient direction connected to the altermagnetic anisotropy, even for 180° domain walls. This gradient generates a ponderomotive force in the domain wall in the presence of a strongly inhomogeneous external magnetic field, which may be achieved through magnetic force microscopy techniques. The motion of these altermagentic domain walls is also characterized by an anisotropic Walker breakdown, with much higher speed limits of propagation than ferromagnets but lower than antiferromagnets.

Vertical vibration control to the in-wheel-motor electric vehicles with static eccentricity based on a reinforcement learning method

The in-wheel-motor electric vehicle (IWM-EV) is hailed as the epitome of driving ingenuity within the realm of electric vehicles. Nonetheless, the intricate nature of its components, compounded by the intricate interplay of multiple force fields, poses a significant detriment to ride comfort. In the present study, an IWM-EV driven by a permanent magnet synchronous motor was employed as a representative case study. Initially, the calculations were conducted to determine the unbalanced magnetic force (UMF) in the presence of static eccentricity of the stator. Subsequently, the characteristics of UMF across different ratios of static eccentricity as well as different velocities in the time domains were analyzed. Furthermore, the road-electromagnetic-mechanical model was developed to investigate the influence of UMF on the vertical vibration of IWM-EV under static eccentricity, comparing it against the scenario devoid of UMF. Finally, a reinforcement learning control approach was adopted to regulate the active suspension system, comparing its efficacy with that of passive suspension and semi-active suspension (specifically, skyhook control). Through extensive simulations, the results demonstrated that the reinforcement learning control strategy derived from the road-electromagnetic-mechanical model outperforms the other two control strategies, exhibiting commendable resilience and adaptability across diverse road surfaces and velocities. This study unveiled the potential of RL methods in enhancing riding comfort through active suspension control.

Zero-Power Control Strategy and Dynamics Enhancement for Hybrid Maglev Conveyor Cart

This paper presents a novel zero-power controller applied to a four-unit magnetic levitation system, aimed at addressing the challenge of maintaining stability under disturbance loads. The zero-power controller, designed based on a state feedback controller integrated with a position servo integrator, is primarily employed to control the balance of the magnetic levitation (Maglev) unit and eliminate steady-state errors. Subsequently, the zero-power controller operates after the state feedback controller to adjust the Maglev unit to a new equilibrium point, primarily utilizing permanent magnetic force to suspend against gravitational input. When loads change or disturbances occur, the system generates current to maintain balance. All designs have passed validation. Experimental results demonstrate the improved zero-power performance and disturbance rejection capabilities of the proposed Maglev system. During synchronous operation, dynamic characteristics have shown significant improvement, which has been experimentally confirmed.

Theoretical and experiment optimization research of a frequency up-converted piezoelectric energy harvester based on impact and magnetic force

Harvesting environmental vibrations to power electronic components is an essential approach for addressing the power supply challenge in MEMS. However, conventional vibration energy harvesting systems frequently suffer from limited frequency bandwidth and high-frequency deficiencies. This paper proposes a novel up-frequency structure for piezoelectric vibration energy harvesting (VEH) that relies on both nonlinear magnetic force and piecewise linear force. The proposed VEH’s nonlinear dynamic characteristics are analyzed theoretically, and an experimental prototype machining and vibration test platform are constructed. Theoretical and experimental results are compared and analyzed by conducting basic experiments and key parameter optimization experiments. The research results demonstrate that the proposed VEH can efficiently harvest vibration energy in low-frequency and wide-band environments. Regarding the system parameters, higher vibration acceleration results in increased output voltage and wider working frequency bandwidth. Reducing the gap distance enhances piecewise linear vibration, which broadens the working frequency bandwidth. Furthermore, the proposed VEH’s ability to harvest low-frequency vibrations can be enhanced by reducing the magnet distance, thereby reducing the linear resonance frequency of the system. The findings of this study offer valuable insights for advancing the engineering application of MEMS self-power supply technology.

Numerical study on Fe3O4 nanoparticle separation from water flow using magnetic field: A 3D simulation

The development of magnetic separation technology using magnetic nanoparticles offers a promising avenue for targeted drug delivery and dealing with the upcoming water crises, environmental pollution and the gradual mineral resource depletion. In this study, a three-dimensional Lagrangian Discrete Phase Model (DPM) is carried out to simulate the performance of Fe3O4 nanoparticles to improve the separation process under the influence of an external magnetic field within a horizontal pipe. The crucial role of the drag force in capture efficiency (CE) prompted its examination, simulating various drag models for groups of particles. The Stokes-Cunningham model, showing a 3.59% average error is a suitable choice compared to experimental results. The research examines the impact of effective parameters, including flow velocity, magnetic field intensity, wire location, particle size and mass flow rate, and pipe diameter on CE and flow pattern. The results show that increasing nanoparticle concentration reshapes the flow pattern due to secondary flows without significantly changing separation efficiency. Moreover, decreasing flow velocity, diminishes drag force and enhances magnetic force impact. Specifically, reducing the velocity to a third increases CE by 37%. Furthermore, capture capacity varies approximately linearly with electric current. Due to the magnetic force’s role as a volumetric force in interphase momentum transfer, the increase in particle size from 200 to 500 nm at 3 × 105 A enhances CE by nearly 50%. However, increasing the pipe diameter diminishes particle capture, attributed to higher Reynolds numbers. According to the results, the impact of increasing magnetic field intensity and particle size on CE improvement is notably more pronounced compared to the effect of flow velocity reduction. A comparative analysis of three injection types reveals that using the group injection type helps to select an appropriate injection location to increase CE and identify the final positions of nanoparticles.

Development of a wheeled wall‐climbing robot with an internal corner wall adaptive magnetic adhesion mechanism

AbstractThe wall‐climbing robot is a growing trend for robotized intelligent manufacturing of large and complex components in shipbuilding, petrochemical, and other industries, while several challenges remain to be solved, namely, low payload‐to‐weight ratio, poor surface adaptability, and ineffective traversal maneuverability, especially on noncontinuous surfaces with internal corners (non‐CSIC). This paper designs a high payload‐to‐weight ratio wheeled wall‐climbing robot which can travel non‐CSIC effectively with a payload capacity of up to 75 kg, and it can carry a maximum load of 141.5 kg on a vertical wall. By introducing a semi‐enclosed magnetic adhesion mechanism, the robot preserves a redundant magnetic adsorption ability despite the occurrence of significant gaps between localized body components and the wall surface. In addition, by ingeniously engineering a passive adaptive module into the robot, both the surface adaptability and crossability are enhanced without increasing the gap between the body and the wall, thereby ensuring the optimization of the adsorption force. Considering the payload capacity and diversity when climbing on vertical walls, inclined walls, ceilings, and internal corner transitions, control equations for internal corner transitions and comprehensive simulations of magnetic adsorption forces are performed using FEA tools. Finally, a functional prototype was developed for rigorous experimental testing, with the results confirming that the robot successfully meets the desired functionality and performance benchmarks.

Effect of current intensity on molten pool and solidification in vacuum arc remelting process of Ti60 alloy

Current intensity is a critical parameter in the vacuum arc remelting (VAR) process, significantly impacting the molten pool, solidification structure, and ultimately, the quality of the ingot. This study establishes a transient electromagnetic-fluid-thermal-solidified coupled model to examine the effects of current intensity on the shape of molten pool and the solidification process of Ti60 alloy ingots produced by VAR process. Findings indicate that with the increase in current intensity, there is a corresponding rise in the magnetic induction intensity, current density, and Lorentz force. This enhancement leads to more vigorous flow in the liquid phase, creating a vortex flow opposing to the ingot's center at the boundary, influenced by the strong current. As a consequence, the molten pool's shape tends to shift from a “V” shape to a “U” shape, and the depth of molten pool increases while the mushy zone thickness diminishes. For instance, at 17000 A, the depth of molten pool surges by 57.43%, and the mushy zone thickness contracts by 62.01% compared to 5000 A. Over time, the depth of molten pool gradually decreases, with its reduction range ( Δh) within 400 to 6000 s inversely related to current intensity. At 17000 A, Δh is 23.71% less than at 5000 A. Furthermore, elevating the current intensity results in a higher temperature gradient within the ingot and a marked reduction in local solidification time, particularly in the ingot's central area.

Magnetic imaging of individual magnetosome chains in magnetotactic bacteria

While significant advances have been made in exploring and uncovering the promising potential of biomagnetic materials, persistent challenges remain on various fronts, notably in the characterization of individual elements. This study makes use of advanced modes of Magnetic Force Microscopy (MFM) and tailored MFM probes to characterize individual magnetotactic bacteria in different environments. The characterization of these elements posed a significant challenge, as the magnetosomes, besides presenting low magnetic signal, are embedded in bacteria of much larger size. To overcome this, customed Atomic Force Microscopy probes are developed through various strategies, enhancing sensitivity in different environments, including liquids. Furthermore, employing MFM imaging under an in-situ magnetic field provides an opportunity to gather quantitative data regarding the critical fields of these individual chains of nanoparticles. This approach marks a substantial advancement in the field of MFM for biological applications, enabling the detection of magnetosomes under different conditions.

The new strategy for enhancing tribological properties of polyimide/Fe3O4 nanocomposites: Magnetic forces induced internal surface self-assembly

The Fe3O4 nanoparticles (nanospheres, nanowires and nanosheets) are self-assembled onto the internal surfaces of the PI matrices under the magnetic forces, which is confirmed by the XRD and SEM of the samples. The internal surface self-assembled PI/Fe3O4 nanocomposites exhibit the best tribological properties, the wear rates are reduced by up to 77.47 % and 36.31 % comparing with unfilled PI and simply blended PI/Fe3O4 nanocomposites, respectively. There are a lot of plastic deformations and wrinkles on the worn surfaces of unfilled PI, while almost no plastic deformations and wrinkles on the worn surfaces of internal surface self-assembled PI/Fe3O4 nanocomposites, which means that frictional shear force and friction heat are absorbed and released by the Fe3O4 nanoparticle layers, resulting the better tribological properties.

Exploring higher-order harmonic eddy current in soft magnetic composites

Electric motors, as the key building blocks of electric vehicles require high power density to enable driving over long distances with minimal power loss. In this regard, considerable research efforts have focused on searching for new magnetic materials, with soft magnetic composites (SMCs) considered promising. However, the eddy currents generated in SMCs are the primary contributors to power loss owing to their induced magnetic field reduction, harmonics that can distort the power waveform, and overheating. While eddy currents have been sufficiently investigated at the macroscopic level, information on their microscopic characteristics and contributions, particularly those depending on harmonic orders, has remained elusive. Here, we propose a systematic way to explore in detail the harmonics of eddy currents in two model systems including a power inductor and iron powder disk, using the atomic force microscopy based technique, so called multidimensional magnetic force microscopy (MMFM). Using MMFM, we show key effects of harmonics related to eddy currents by unveiling each contribution toward magnetic signals. In particular, the MMFM images show local variations in the nth harmonic of the eddy current signals within the spatially mapped magnetic features. These results show the proposed approach is effective to explore the harmonics of eddy currents, offering fundamental insight for development of highly efficient electric motors.

Nonlinear dynamics of diamagnetically levitating resonators

The ultimate isolation offered by levitation provides new opportunities for studying fundamental science and realizing ultra-sensitive floating sensors. Among different levitation schemes, diamagnetic levitation is attractive because it allows stable levitation at room temperature without a continuous power supply. While the dynamics of diamagnetically levitating objects in the linear regime are well studied, their nonlinear dynamics have received little attention. Here, we experimentally and theoretically study the nonlinear dynamic response of graphite resonators that levitate in permanent magnetic traps. By large amplitude actuation, we drive the resonators into nonlinear regime and measure their motion using laser Doppler interferometry. Unlike other magnetic levitation systems, here we observe a resonance frequency reduction with amplitude in a diamagnetic levitation system that we attribute to the softening effect of the magnetic force. We then analyze the asymmetric magnetic potential and construct a model that captures the experimental nonlinear dynamic behavior over a wide range of excitation forces. We also investigate the linearity of the damping forces on the levitating resonator, and show that although eddy current damping remains linear over a large range, gas damping opens a route for tuning nonlinear damping forces via the squeeze-film effect.

Impact of porous medium on natural convection heat transfer in plume generated due to the combined effects of heat source and aligned magnetic field

This study focuses on how the porous medium affects the plume generated due to line heat source when an aligned magnetic field is present. For this study, the momentum equation of the flow model is modified for porous medium by including the porosity term. A mathematical model is developed as coupled partial differential equations in order to study the flow problem. Later, a numerical solution is found for the system of coupled partial differential equations that are transmuted in to ordinary differential equations. For this purpose, the numerical characteristics of the problem are derived employing a shooting approach in combination with the built-in MATLAB tool bvp4c. The graphical illustrations of missing and specified boundary conditions demonstrate the impacts of porosity parameter [Formula: see text], magnetic force parameter S, Prandtl number [Formula: see text] and magnetic Prandtl number [Formula: see text] accompanied by a discussion of their corresponding physical implications. The novelty of this developed problem is proclaimed with justification by its emphasis on the principal characteristics of heat and fluid flow affected predominantly by the presence of a porous medium. The thorough examination of the porosity parameter [Formula: see text] for missing conditions depicts that the temperature and velocity profiles enhance while current density drops for the increasing values of the porosity parameter [Formula: see text]. Whereas, for specified conditions, the skin friction and magnetic flux enhance but heat transfer rate declines with increment in [Formula: see text].

Individual and collective manipulation of multifunctional bimodal droplets in three dimensions.

Spatiotemporally controllable droplet manipulation is vital across numerous applications, particularly in miniature droplet robots known for their exceptional deformability. Despite notable advancements, current droplet control methods are predominantly limited to two-dimensional (2D) deformation and motion of an individual droplet, with minimal exploration of 3D manipulation and collective droplet behaviors. Here, we introduce a bimodal actuation strategy, merging magnetic and optical fields, for remote and programmable 3D guidance of individual ferrofluidic droplets and droplet collectives. The magnetic field induces a magnetic dipole force, prompting the formation of droplet collectives. Simultaneously, the optical field triggers isothermal changes in interfacial tension through Marangoni flows, enhancing buoyancy and facilitating 3D movements of individual and collective droplets. Moreover, these droplets can function autonomously as soft robots, capable of transporting objects. Alternatively, when combined with a hydrogel shell, they assemble into jellyfish-like robots, driven by sunlight. These findings present an efficient strategy for droplet manipulation, broadening the capabilities of droplet-based robotics.

An energy efficient way for quantitative magnetization switching

Recent advancements in electrically controlled spin devices have been made possible through the use of multiferroic systems comprising ferroelectric (FE) and ferromagnetic (FM) materials. This progress provides a promising avenue for developing energy-efficient devices that allow for electrically controlled magnetization switching. In this study, we fabricated spin orbit torque (SOT) devices using multiferroic composites and examined the angular dependence of SOT effects on localized in-plane strain induced by an out-of-plane electric field applied to the piezoelectric substrate. The induced strain precisely modulates magnetization switching via the SOT effect in multiferroic heterostructures, which also exhibit remarkable capability to modulate strain along different orientations – a feature with great potential for future applications in logic device arrays. To investigate the influence of electric fields on magnetization switching, harmonic Hall measurements, synchrotron-powered x-ray magnetic circular dichroism-photoemission electron microscopy (XMCD-PEEM), x-ray diffraction (XRD), magnetic force microscopy (MFM), and micromagnetic simulation were conducted. The results demonstrate that electric-field-induced strain enables precise control of SOT-induced magnetization switching with significantly reduced energy consumption, making it highly suitable for next-generation spin logic devices.

A comparative study for ferro particles cloaking and wetting characteristics

Ferro hydrophobic particles possess essential properties for controlling the behavior of suspended substances in water. By adjusting the concentration of these particles, the magnetic force within the fluid carrier can be modified, leading to the emergence of distinct flow structures and patterns on the water's surface. This study examines the cloaking phenomenon exhibited by different ferroparticle conditions, employing both experimental and numerical approaches. Under the magnetic influence, hydrophilic particles can attain cloaking velocities of up to 35 mm/s, while hydrophobic particles remain unaffected by the magnetic force, remaining suspended on the water's surface. Hydrophobization of ferroparticles not only decreases their water-cloaking ability but also alters their magnetic properties. The inherent hydrophobic nature of these particles enhances water surface stability, rendering them valuable in various applications, including biomedical and self-cleaning technologies. This research holds particular significance for manipulating suspended particles in water, particularly in biomedical applications like drug delivery and tissue engineering, as well as for advancing self-cleaning technologies.

Spin orientation evolution of individual ferromagnetic nanoparticle during reversing magnetization processes revealed by micromagnetic simulations

Understanding the internal magnetization structure of an individual ferromagnetic nanoparticle (MNP) is crucial for deciphering its magnetic characteristics. Unfortunately, while certain techniques can measure the magnetic properties of an individual MNP, they fall short of accurately detecting the internal magnetization structure. In this work, micromagnetic simulations were employed to construct the internal magnetization structure of an individual CoFe2O4 (CFO) nanopyramid, and the energy jump behavior during the magnetization process was successfully explained, with simulation results aligning with dynamic cantilever magnetometry (DCM) experimental outcomes. Subsequently, the external stray field of the nanopyramid was simulated, and the stray field gradient map revealed distinct bright and dark regions corresponding to the reverse and forward saturation magnetizations of the CFO nanopyramid. This result is possible to be verified by magnetic force microscopy (MFM) measurements of individual CFO nanopyramids. The confidence in the accuracy of the simulated internal magnetization structure was significantly enhanced by independently verifying the micromagnetic simulation results through DCM and MFM experiments. Our work proposes a convenient and cost-effective method for studying the internal magnetization structure of individual MNPs.

Monitoring and Analysis of Prestress Loss in Prestressed Box Girder Bridges Strengthened with External Prestressing.

To investigate the effects of long-term prestress loss on concrete box girders strengthened with external prestressing, a large-span box girder, in service for over 20 years and strengthened with external prestressing, was monitored for four months. Prestress loss in the longitudinal, vertical, and transverse directions of the box girder was calculated according to Chinese code requirements. Magnetic flux rope force transducers were used to monitor the prestress loss in the external prestressing cables. Fiber Bragg Grating (FBG) sensors were used to monitor deflection changes at the mid-span of the bridge. Finally, the effect of prestress loss in the longitudinal, vertical, and transverse tendons on mid-span deflection was investigated through simulations using ABAQUS software. The results show that instantaneous prestress loss accounts for most of the total loss compared to long-term loss, and that longitudinal prestress loss has the most significant effect on mid-span deflection. The impact of longitudinal prestress loss on deflection before and after strengthening was also compared. The downward deflection and up-ward arch caused by longitudinal tendon prestress loss were reduced after strengthening, con-firming the effectiveness of the external prestressing method.

Construction of an S-scheme electron transfer channel in Cu0/CuFe2O4 magnetic plate column reactor for the LEV degradation: New strategy of visible Photo-Fenton system application

The complicated loading process and easy falling off of powder catalysts still restrict the wide application of Photo-Fenton technology in practical water treatment. In this study, a magnetic fixed film plate column water treatment equipment is designed as a visible Photo-Fenton reactor to remove levofloxacin (LEV). The effect of magnetic force can ensure that the catalyst is firmly fixed, and the multi-level shallow column plate structure achieves full contact and efficient reaction between the catalyst and wastewater. Simultaneously, the Cu0/CuFe2O4 (STCCF) utilizes Cu0 to construct an S-scheme electron transfer channel, which improves the separation efficiency of photo-generated carriers and provides sufficient photo-generated electrons for the reduction of Fe (Ⅲ) and Cu (Ⅱ). The pseudo-first-order reaction kinetic constant k for the degradation of LEV in the visible Photo-Fenton system is 0.0349 min−1, which is 15.9 times that of the photocatalytic system and 4.8 times that of the Fenton system. After continuous operation for 72 h, the magnetic fixed film plate column reactor can still remove more than 90 % of LEV and 82 % of COD in the secondary effluent of simulated antibiotic pharmaceutical wastewater treatment process, and the effluent is stable and meets the standard. The magnetic fixed film plate column reactor can be used for advanced treatment of antibiotic pharmaceutical wastewater. This study provides a new insight into the application of the Photo-Fenton process.

A Magnetically Coupled Piezoelectric Ocean Wave Energy Harvester for Self-Powered Low-Power Appliances

The ocean contains abundant wave energy, which can be used as a new regenerative energy for power generation and provide energy for self-powered low-power appliances, realizing in situ energy utilization. Then, it can effectively promote the sustainable development strategy of the ocean and bring huge energy and social and environmental benefits. This paper proposes a magnetically coupled piezoelectric ocean wave energy harvester (MPWEH) system for wave energy harvesting. The MPWEH system includes four modules: energy harvesting, force magnification, piezoelectric power generation, and energy storage module. The energy harvesting module moves up and down in the tube body with the wave, effectively capturing and absorbing the wave energy and transforming the harvesting module’s motion into the interaction repulsive force between magnets. Then, the force magnification module amplified the magnetic force and applied it to the polarization direction of the piezoelectric ceramic to self-power the low-power appliances. This research carried out the feasibility verification experiment with the MPWEH prototype, and the results show that when the period is 3[Formula: see text]s, and the amplitude is 2[Formula: see text]m, the maximum voltage can reach 15[Formula: see text]V, and the maximum power can reach 12.85[Formula: see text]mW. Take Jiaozhou Bay Bridge as an example. The MPWEH system’s energy harvesting potential is studied, and the annual power generation of all the acquisition devices can reach 55.72[Formula: see text]kWh, which can be enough energy to supply the sensors on the cross-sea bridge.