Magnetic Coil Research Articles

Electro-Magnetic and Stress Analysis of a −400 T2/m High-Field Gradient Magnet with a Room-Temperature Bore Size of 200 mm

High-field-strength gradient superconducting magnets have been widely used in many fields. With advancements in technology, the demand for large-aperture magnets is gradually increasing, but there is relatively little research on the design and stress–strain of large-aperture gradient magnets. This article presents the design and analysis of a superconducting magnet characterized by a high field strength of 10 T, a strong gradient of −400 T2/m, and a large room-temperature bore of 200 mm. The aim of this project is to establish an experimental setup for the growth of Ga1−xInxSb crystals. The study starts with an overview of the development process and applied research related to strong-gradient magnets. The study employs a magneto–electric force coupling method based on generalized stretching to theoretically optimize the gradient coil pre-stress parameters through orthogonalization parameter scanning. In addition, an analysis of the stress distribution in both the magnet coil and the mandrel is carried out. The results indicate that the stress and strain values for both the gradient coils and the frame are within the allowable range of their respective materials. The magnets can be designed to operate stably in theory. This article may provide a reference for designers in related fields in optimizing the design and stress–strain analysis of large, strong-gradient magnets.

Analysis and experimentation of variable gap magnetorheological transmission device driven by electromagnetic force

To solve the problems of poor transmission performance and small torque regulation range of traditional MR device, a variable working gap MRF transmission device driven by electromagnetic force is proposed. The device uses electromagnetic force driving the squeeze disk to move axially to squeeze the MRF, thereby changing the number of working gaps and effective working thickness of the MRF to improve the transmission performance of the MR device. Based on the coil magnetization effect, the relationship between current, magnetic field intensity, and electromagnetic force is established. According to the driving characteristics of electromagnetic force and the rheological characteristics of MRF, a nonlinear function relationship between electromagnetic force and MRF working gap thickness and working volume is derived. Using the finite element method, a theoretical analysis of the magnetic circuit design, magnetic field distribution and temperature change profile in different parts of MRF device with different currents was conducted, the MRF torque transfer equations were deduced and calculated, and experimentally verified the correctness of the theoretical equations. Finally, the transmission performance of the variable working gap MRF transmission device is tested through the established testing system. Results show that, the required squeeze force is 6.65 kN when the MRF thickness reaches 1 mm in both working gaps. As the current increases from 0.5 to 3.0 A, the electromagnetic force increases from 0.65 to 6.77 kN, with an increase of 972.3%, the average temperature of the MRF in working gap I increases from 25.2°C to 71.2°C and the MRF in working gap II increases from 23.5°C to 48.3°C. When the current is 1.5 A, the MRF in the working gap I reaches magnetic saturation, continue to increase the current to 3.0 A, the MRF thickness in both working gaps is 1 mm, and the MR device transmits torque reach 376.6 N·m, which is 72.3% higher than that of the traditional MR device.

Treatment Temperature and Magnetic Field Distribution for Magnetic Hyperthermia Using Magnetic Nanoparticles

A minimally invasive cancer treatment method utilizing magnetic nanoparticles (MNPs) and magnetic coils, magnetic hyperthermia, generates heat locally inside the body to degenerate cancer cells. The uniformity of the coil's magnetic field is a crucial factor in enhancing the therapeutic effect. In this study, we evaluated the temperature distribution of MNPs on induction heating experiments at various distances using two types of coils. We found that the 2‐turn coil with a larger outer diameter and higher magnetic field uniformity resulted in a treatment temperature region approximately twice as wide as the 4‐turn coil, indicating the enhancement of the treatment effect under the uniform magnetic field distributions. © 2024 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC.

MATRESHCA: Microtesla Apparatus for Transfer of Resonance Enhancement of Spin Hyperpolarization via Chemical Exchange and Addition.

We present an integrated, open-source device for parahydrogen-based hyperpolarization processes in the microtesla field regime with a cost of components of less than $7000. The device is designed to produce a batch of 13C and 15N hyperpolarized (HP) compounds via hydrogenative or non-hydrogenative parahydrogen-induced polarization methods that employ microtesla magnetic fields for efficient polarization transfer of parahydrogen-derived spin order to X-nuclei (e.g., 13C and 15N). The apparatus employs a layered structure (reminiscent of a Russian doll "Matryoshka") that includes a nonmagnetic variable-temperature sample chamber, a microtesla magnetic field coil (operating in the range of 0.02-75 microtesla), a three-layered mu-metal shield (to attenuate the ambient magnetic field), and a magnetic shield degaussing coil placed in the overall device enclosure. The gas-handling manifold allows for parahydrogen-gas flow and pressure control (up to 9.2 bar of total parahydrogen pressure). The sample temperature can be varied either using a water bath or a PID-controlled heat exchanger in the range from -12 to 80 °C. This benchtop device measures 62 cm (length) × 47 cm (width) × 47 cm (height), weighs 30 kg, and requires only connections to a high-pressure parahydrogen gas supply and a single 110/220 VAC power source. The utility of the device has been demonstrated using an example of parahydrogen pairwise addition to form HP ethyl [1-13C]acetate (P13C = 7%, [c] = 1 M). Moreover, the Signal Amplification By Reversible Exchange in SHield Enables Alignment Transfer to Heteronuclei (SABRE-SHEATH) technique was employed to demonstrate efficient hyperpolarization of 13C and 15N spins in a wide range of biologically relevant molecules, including [1-13C]pyruvate (P13C = 14%, [c] = 27 mM), [1-13C]-α-ketoglutarate (P13C = 17%), [1-13C]ketoisocaproate (P13C = 18%), [15N3]metronidazole (P15N = 13%, [c] = 20 mM), and others. While the vast majority of the utility studies have been performed in standard 5 mm NMR tubes, the sample chamber of the device can accommodate a wide range of sample container sizes and geometries of up to 1 L sample volume. The device establishes an integrated, simple, inexpensive, and versatile equipment gateway needed to facilitate parahydrogen-based hyperpolarization experiments ranging from basic science to preclinical applications; indeed, detailed technical drawings and a bill of materials are provided to support the ready translation of this design to other laboratories.

A proof-of-concept Bitter-like HTS electromagnet fabricated from a silver-infiltrated (RE)BCO ceramic bulk

A novel concept for a compact high-field magnet coil is introduced. This is based on stacking slit annular discs cut from bulk rare-earth barium cuprate ((RE)BCO) ceramic in a Bitter-like architecture. Finite-element modelling shows that a small 20 turn stack (with a total coil volume of < 20 cm3) is capable of generating a central bore magnetic field of > 2 T at 77 K and > 20 T at 30 K. Unlike resistive Bitter magnets, the high-temperature superconducting (HTS) Bitter stack exhibits significant non-linear field behaviour during current ramping, caused by current filling proceeding from the inner radius outwards in each HTS layer. Practical proof-of-concept for this architecture was then demonstrated through fabricating an uninsulated four-turn prototype coil stack and operating this at 77 K. A maximum central field of 0.382 T was measured at 1.2 kA, with an accompanying 6.1 W of internal heat dissipation within the coil. Strong magnetic hysteresis behaviour was observed within the prototype coil, with ≈30% of the maximum central field still remaining trapped 45 min after the current had been removed. The coil was thermally stable during a 15 min hold at 1 kA, and survived thermal cycling to room temperature without noticeable deterioration in performance. A final test-to-destruction of the coil showed that the limiting weak point in the stack was growth-sector boundaries present in the original (RE)BCO bulk.

Trans-spinal magnetic stimulation induces co-activation of the diaphragm and biceps in healthy subjects.

The present study was designed to examine the effect of trans-spinal magnetic stimulation on bilateral respiratory and forelimb muscles in healthy subjects. Two wings of a figure-of-eight magnetic coil were placed on the dorsal vertebrae, from the fifth cervical to the second thoracic dorsal vertebra with a center at the seventh cervical vertebra. The surface electromyograms of bilateral diaphragm and biceps were recorded in response to trans-spinal magnetic stimulation with 20%-100% maximum output of the stimulatory device in male (n = 12) and female participants (n = 8). Trans-spinal magnetic stimulation can induce a co-activation of bilateral diaphragm and biceps when the stimulation intensity is above 60%. The onset latency was comparable between the left and right sides of the muscles, suggesting bilateral muscles could be simultaneously activated by trans-spinal magnetic stimulation. In addition, the intensity-response curve of the biceps was shifted upward compared with that of the diaphragm in males, indicating that the responsiveness of the biceps was greater than that of the diaphragm. This study demonstrated the feasibility of utilizing trans-spinal magnetic stimulation to co-activate the bilateral diaphragm and biceps. We proposed that this stimulatory configuration can be an efficient approach to activate both respiratory and forelimb muscles.

Repulsive magnetic levitation-based electromagnetic energy harvesting of a low-frequency ocean wave

In this study, an electromagnetic energy harvester for a low-frequency ocean wave was developed in a compact 3D-printed structure. Ocean wave energy conversion technologies exist, but maintaining them in the harsh marine environment is crucial for business. Friction increases maintenance costs. Therefore, magnetic levitation, being friction-free, is used for cost-effective, low-maintenance electromagnetic energy harvesting applications. Low-frequency oscillating energy is captured using repulsive magnetic levitation with a buoy and generating electricity using a permanent magnet and copper coil. A levitating magnet is repelled by a fixed one, inducing electricity as it passes through a coil. Experiments with a 0.1 Hz sine wave mimic the average frequency of ocean waves, showing successful voltage peaks at intervals. The output voltage and measured power from the harvester exhibit variations influenced by multiple parameters. The maximum output voltage observed was 3.4 V and an average of 99 mW of power was calculated. The experiment demonstrates the feasibility of using repulsive magnetic levitation for low-frequency wave energy harvesting and also encompasses various harvester configurations, including transfer magnet forces and top magnets.

Optimizing transcranial magnetic stimulator coils for minimal influence of individual variability in head geometry

In prior studies focused on transcranial magnetic stimulator (TMS) coils, optimization of coil windings typically occurred on generic curved surfaces, such as planes or cylindrical shapes. However, these surfaces do not consider the challenge of coil misalignment, which arises due to variations in individual head geometries. This misalignment can significantly diminish the coil's effectiveness. To address this issue, we propose a novel coil design approach that identifies the 'best-fit' curved surface, minimizing the likelihood of mismatch with diverse skull geometries. We further enhance the coil winding pattern using the stream function applied to this custom curved surface. Numerical simulations using a hemisphere brain model demonstrate that the coil designed on this 'best-fit' curved surface exhibits a remarkable 22% increase in efficiency and a 41% expansion in stimulation area compared to the conventional butterfly coil. These findings underscore the advantages of our method in crafting high-efficiency and wide-ranging therapeutic TMS coil.

Applying Electrical Magnetic Coil and In-Pipe INS to Map Underground Pipeline Track

Applying Electrical Magnetic Coil and In-Pipe INS to Map Underground Pipeline Track

Simultaneous mapping of the magnetic field components using near-field microscopy

In this work, we present a near-field scanning optical microscope capable of simultaneously mapping the x− , y− , and z− components of the magnetic field generated by a set of magnetic coils in the kHz range. Using this device, we present two experiments: the observation of the well-known magnetic field of a circular coil and a resolution test. The observations achieved with our instrument are supported by numerically calculated simulations, which confirm the validity of our experimental results. In addition, our instrument is capable of imaging features of the order of 15mm , representing a resolution of λ/10000 . Our approach establishes an important avenue for the three-dimensional mapping of the electromagnetic field in any spectral range, using the correct configuration of the probe, and opens a new discussion on the resolution of scanning probe microscopes imaging more than one component of the studied field.

Passive magnetic coil design for electromagnetic interference evaluation of axle counters

Measurement of magnetic fields near the railway tracks is crucial to ensure compatibility with the operation of axle counters. According to EN 50592 standard, the magnetic field is detected with a passive magnetic coil and an oscilloscope. From previous studies, in general, there has been no in-depth analysis of how the choice of coil winding parameters could affect the coil output voltage, which then affect the measurement sensitivity, in particular the coil design based on the standard and it is applicability for electromagnetic interference (EMI) evaluation of axle counters. Therefore, this paper will explore the design of a passive magnetic coil to obtain the optimum coil output voltage within the frequency range. Simulations showed that for 10-100 kHz and 100 kHz–1.3 MHz range, the optimum number of turns happened at 60-100 and 15-60 turns, respectively. Based on that, two example coils had been built. Simulations and measurements of their frequency response were in good agreement, with a deviation less than 1.0 dB.

Analytical corrections for B1-inhomogeneity and signal decay in multi-slice 2D spiral hyperpolarized 129Xe MRI using keyhole reconstruction.

Hyperpolarized xenon MRI suffers from heterogeneous coil bias and magnetization decay that obscure pulmonary abnormalities. Non-physiological signal variability can be mitigated by measuring and mapping the nominal flip angle, and by rescaling the images to correct for signal bias and decay. While flip angle maps can be calculated from sequentially acquired images, scan time and breath-hold duration are doubled. Here, we exploit the low-frequency oversampling of 2D-spiral and keyhole reconstruction to measure flip angle maps from a single acquisition. Flip angle maps were calculated from two images generated from a single dataset using keyhole reconstructions and a Bloch-equation-based model suitable for hyperpolarized substances. Artifacts resulting from acquisition and reconstruction schemes (e.g., keyhole reconstruction radius, slice-selection profile, spiral-ordering, and oversampling) were assessed using point-spread functions. Simulated flip angle maps generated using keyhole reconstruction were compared against the paired-image approach using RMS error (RMSE). Finally, feasibility was demonstrated for in vivo xenon ventilation imaging. Simulations demonstrated accurate flip angle maps and B1-inhomogeneity correction can be generated with only 1.25-fold central-oversampling and keyhole reconstruction radius = 5% (RMSE = 0.460°). These settings also generated accurate flip angle maps in a healthy control (RSME = 0.337°) and a person with cystic fibrosis (RMSE = 0.404°) in as little as 3.3 s. Regional lung ventilation images with reduced impact of B1-inhomogeneity can be acquired rapidly by combining 2D-spiral acquisition, Bloch-equation-based modeling, and keyhole reconstruction. This approach will be especially useful for breath-hold studies where short scan durations are necessary, such as dynamic imaging and applications in children or people with severely compromised respiratory function.

Experimental observation of micro-tearing modes in the tokamak pedestal

A micro-tearing mode has been observed in electron temperature fluctuations and magnetic fluctuations with the frequency range of 80–120 kHz in the pedestal of the Experimental Advanced Superconducting Tokamak (EAST) using Electron Cyclotron Emission Imaging (ECEI) and Mirnov magnetic coil measurement. It appears in the type-I ELMs period after the L-H transition. The measured poloidal phase velocity of the electron temperature fluctuations is ∼40 km/s (f = 80–120 kHz) in the electron diamagnetic direction in the laboratory frame with the poloidal wave number around kΘ ∼0.15 /cm. The two-dimensional structure of MTMs is directly observed using two-dimensional Electron cyclotron emission imaging. The experiment confirmed that the electron temperature (ECEI) and radial electric field (Backward Doppler reflectometer) during MTM meet the pressure balance equation. Until now, the theory and simulation results showed that transport is in heat flux, small particle flux, while the experimental results of this paper indicate that the particle flux is small.

Development of a magneto-optical Kerr microscope using a 3D printer

Background Magneto-optical Kerr effect (MOKE) microscopes are powerful experimental tools to observe magnetic domains in magnetic materials. These devices are, however, typically large, unportable, and expensive (∼ several million yen), and therefore prevent many researchers in the field of materials science from easy access to study real-space images of magnetic domains. Methods To overcome these issues, we utilized data from “The OpenFlexure Project” developed by the University of Bath and the University of Cambridge. The purpose of this project is to make high-precision mechanical positioning of the studied sample available to anyone with a 3D printer, especially for use in microscopes. We built a low-cost and portable MOKE microscope device with a 3D printer. We redesigned the 3D modeling data of an ordinary optical microscope provided by The OpenFlexure project and incorporated additional elements, such as optical polarizers and an electromagnetic coil into the primarily designed microscope that did not originally have these elements. Results We successfully observed magnetic domains and their real-space motions induced by magnetic fields using the palm-sized low-cost MOKE microscope, which costs approximately 30,000 yen in raw materials to construct. Conclusions Our methodology to assemble a low-cost MOKE microscope will enable researchers working in the field of materials science to observe magnetic domains more easily without commercial equipment.

Experimental study of the effects of a magnetic field/magnetic field-ferromagnetic nanocomposite pour point depressant on wax deposition.

A magnetic field and pour point depressant, as a new avenue for improving the submarine pipeline flow of waxy oils, has attracted increasing attention along with the development of efficient wax mitigation techniques. Although advances have been made recently in understanding the rheological behavior and crystallization properties of waxy oils, the effect of magnetic field and pour point depressants on wax deposition remains an open question. In this work, a ferromagnetic nanocomposite pour point depressant (FNPPD) was prepared. The variations in wax deposition mass and component under the effect of different magnetic treatments and magnetic field-FNPPDs were investigated using cold fingers and high-temperature gas chromatography. It was evident that both the high-intensity and high-frequency magnetic fields generated by the magnet and magnetic coil can effectively reduce the deposition mass and have a long-term magnetic history effect. The synergistic effect of magnetic fields and FNPPDs concurrently reduced the thickness/mass and wax content in the deposition layer, as compared to the individual use of magnetic fields or FNPPDs. The wax precipitation properties and wax crystal morphology of waxy oils under the action of the magnetic field were characterized by differential scanning calorimetry, focused beam reflectance measurement and polarizing microscopy experiments, and the mechanism of the magnetic field was elaborated from the perspective of crystallization kinetics by combining the fitting analysis of Avrami and size-independent growth model.

Uncovering the structural and photoelectric properties of perovskite crystals by joint multifaceted characterization and theoretical analysis

The potential of organic-inorganic hybrid perovskites, owing to their distinct photoelectric attributes and boosted photoluminescence stability, has garnered substantial attention. Despite comprehensive examinations of the synthesis and optical characteristics of FAPbBr3 crystals, the understanding of their microstructure's implication on photoelectric applications, their electronic configuration, and electron-phonon interplay remains vague. In this study, we detailed the electronic configuration, phonon dispersion, and vibrational properties using density functional theory. We further calculated the formation enthalpy stability diagram. Characterization and calculation of the crystalline structure were accomplished via Rietveld refinement. Phonon dispersion curves, as well as total and partial phonon densities of states, were also calculated. The theoretical results align well with experimental Fourier infrared and Raman spectra. Beyond elementary characterization, we explored the photoelectric qualities of FAPbBr3 crystals, thereby reaffirming the outstanding photoelectric attributes and extensive application potential. A non-contact fixed-point lighting device was designed based on the principle of electromagnetic induction coils, which proved the uniformity of crystal luminescence. According to the first principle, FAPbBr3 possesses a Poisson ratio of 0.32, indicative of high flexibility, emphasizing their superb photoelectric characteristics and vast application scope.

3D Position Tracking Using On-Chip Magnetic Sensing in Image-Guided Navigation Bronchoscopy.

This paper presents a compact and low-cost on-chip sensor and readout circuit. The sensor achieves high-resolution 5-degrees-of-freedom (DoF) tracking (x, y, z, yaw, and pitch). With the help of an external wire wound sensor, it can also achieve high-resolution 6-degrees-of-freedom (DoF) tracking (x, y, z, yaw, pitch, and roll angles). The sensor uses low-frequency magnetic fields to detect the position and orientation of instruments, providing a viable alternative to using X-rays in image-guided surgery. To measure the local magnetic field, a highly miniaturised on-chip magnetic sensor capable of sensing the magnetic field has been developed incorporating an on-chip magnetic sensor coil, analog-front end, continuous-time ∆Σ analog-to-digital converter (ADC), LVDS transmitter, bandgap reference, and voltage regulator. The microchip is fabricated using 65 nm CMOS technology and occupies an area of 1.06 mm 2, the smallest reported among similar designs to the best of our knowledge. The 5-DoF system accurately navigates with a precision of 1.1 mm within the volume-of-interest (VOI) of 15 ×15 ×15 cm 3. The 6-DoF system achieves a navigation accuracy of 0.8 mm and an angular error of 1.1 degrees in the same VOI. These results were obtained at a 20 Hz update rate in benchtop characterisation. The prototype sensor demonstrates accurate position tracking in real-life pre-clinical in-vivo settings within the porcine lung of a live swine, achieving a reported worst-case registration accuracy of 5.8 mm.

Design of Uniform Magnetic Field Coil With Off-Center Target Region Based on Slime Mold Algorithm for Atomic Magnetometers

Design of Uniform Magnetic Field Coil With Off-Center Target Region Based on Slime Mold Algorithm for Atomic Magnetometers

Highly Homogeneous and Low-Noise Magnetic Field Compensation Based on the High-Uniform Magnetic Field Coils With Small Coil Constant

Highly Homogeneous and Low-Noise Magnetic Field Compensation Based on the High-Uniform Magnetic Field Coils With Small Coil Constant

Magnetic Field Coil Design Based on Distributed Taylor Expansion: Toward Large Uniform Area With High Orthogonality and Self-Shielding Feature

Magnetic Field Coil Design Based on Distributed Taylor Expansion: Toward Large Uniform Area With High Orthogonality and Self-Shielding Feature