Luminescence Of Eu3 Research Articles

Qualitative and Quantitative Luminescence Detection of 2,6-Dipicolinic Acid and Levofloxacin Based on a High-Nuclearity Eu(III) Nanomolecular Sensor.

Rapid and accurate testing of 2,6-dipicolinic acid (DPA) and levofloxacin (LFX) has been attracting much attention due to the fact that the former is an important biomarker of anthrax spores and the latter is a third-generation fluoroquinolone drug and has been recognized as an important environmental pollutant. Herein, we report the preparation of a 13-metal Eu(III) nanomolecular sensor (molecular sizes: 2.0 × 2.4 × 3.2 nm) bearing a new flexible Schiff base ligand for luminescence testing of DPA and LFX with high selectivity and sensitivity. The rapid enhancement of the Eu(III) luminescence of 1 caused by DPA and LFX is expressed by fitting equation I615nm = k × [C] + a, which can be used to quantitatively detect DPA and LFX concentrations in CH3CN, fetal calf serum (FCS), and a real drug. The response times of 1 to DPA and LFX are less than ten seconds, with detection limits as low as 3.78 × 10-2 to 2.71 nM. The test strips containing 1, as well as 1@SA films, can be used to qualitatively detect DPA and LFX by the color changes under the irradiation of UV light.

Europium-Infused Polystyrene Nanoparticles for Enhanced Bacterial Labeling in Microscopic Imaging

Luminescence microscopic imaging has become an indispensable tool in diagnostics and therapeutics. Lanthanide luminescent complexes (LLCs) have proven to be invaluable in this endeavor due to certain attractive characteristics such as long decay times, large Richardson shifts and narrow emission bands. However, the insolubility of these complexes and the negative effects of the aqueous environment on their photophysical properties still restrict their biological applications. By embedding luminescent Eu3+ complexes into polystyrene nanoparticles (NPs), these complexes can not only maintain their photophysical properties, but even enhance them. This leads to exceptionally high quantum yields (> 90 %) and decay times ( >800 μs). In addition, the surfaces of the NPs described here are covered with primary amine groups, which may be exploited for various interesting bioconjugation chemistries. In the present application, they were modified with N-hydroxysuccinimide (NHS) esters and then coupled either electrostatically or covalently to both, Gram-positive and Gram-negative bacteria, labeling them for luminescence microscopic imaging. This, to the best of our knowledge, is the first report of polymer NPs infused with LLCs for bacteria labeling.

Opto/Thermoresponsive Multimode Luminescence in Eu- and Er-Activated CaF2 Phosphor for High-Security Anticounterfeiting.

As the landscape of information storage and security continues to evolve, the deployment of sophisticated anticounterfeiting strategies with robust security features and multimodal luminescent capabilities becomes imperative. In this work, Eu3+ and Er3+ ions are codoped into CaF2 phosphors to achieve multimodel optical output. The self-reduction of Eu3+ within the CaF2 matrix gives rise to the coexistence of Eu3+ and Eu2+ ions, which manifests as a color transition from orange to blue as the excitation wavelength is varied from 300 to 335 nm. Moreover, the distinct temperature-dependent behaviors of Eu3+ and Eu2+ ions underscore the material's visible temperature-sensitive luminescence properties, characterized by remarkable thermal sensitivity (Sa = 0.0156 K-1, Sr = 0.83%K-1). Additionally, the strategic introduction of Er3+ ions adds an extra dimension, enabling the realization of color-tunable upconversion luminescence through the fine-tuning of Er3+ concentration. This synergistic integration culminates in the establishment of an efficient three-path authentication model within the CaF2 host matrix, facilitating a dynamic multicolor response to changes in the excitation wavelength and temperature. By harnessing these diverse luminescent modalities, the study delivers a versatile and potent anticounterfeiting solution, advancing the frontiers of information security.

Red luminescence CaSiO3:Eu3+ eco-friendly nontoxic phosphor derived from biomass for display and latent finger print applications

Red luminescent Eu3+ activated CaSiO3 phosphor has been prepared by facile green synthesis hydrothermal route using biomass. Future technologies will be required to synthesize on a massive scale using quick, easy, and affordable ways. The current study deals with the preparation of CaSiO3:Eu3+ using egg shell and rice husk ash. The synthesized powders had a single phased monoclinic structure with space group P1 21/C1. It has been found that addition of Eu3+ ion dopant causes decrease in the optical energy band gap. The phosphor exhibits the intense peak at 612 nm corresponds to 5D0 → 7F2 of the Eu3+ anions upon excitation at 392 nm. The lifetimes ranged from 1.90 to 3.53 ms. With an increase in Eu3+ concentration, emission was tuned towards the red area of the CIE diagram. In order to detect hidden fingerprints on flat surfaces using the powder dusting approach, the CaSiO3:Eu3+ effectiveness was also evaluated. The nontoxicity of CaSiO3:Eu3+ was validated by carrying out a cell viability test on MG 63 cell lines. These outcomes demonstrated that the luminescent CaSiO3:Eu3+ can be used as potential material for display, security encoding, and latent fingerprint applications.

A novel high-brightness and thermally-stable red phosphor Ca2GaNbO6: Eu3+ for WLEDs and anti-counterfeiting inks

There is a significant demand for phosphorescent white light-emitting diodes (WLEDs) with high color rendering index (CRI) and low correlated color temperature (CCT) as solid-state lighting sources due to their environmental friendliness. In this study, a novel ultraviolet (UV)-excited Eu3+-activated Ca2GaNbO6 phosphor was meticulously synthesized by a high-temperature solid-state method, which led to the fabrication of warm WLEDs with low CCT and superior CRI. Meanwhile, Eu3+-doped Ca2GaNbO6 phosphors with different Eu3+ dopant concentrations were synthesized, and the luminescence of Eu3+ at an optimal concentration of 25 mol% was extensively investigated. Remarkably, Ca2GaNbO6 doped with 25 mol% Eu3+ exhibits a wide excitation band spanning 250–550 nm, with the highest peak observed at 465 nm. This phosphor emits a brilliant red light ranging from 550 to 720 nm. In addition, upon excitation with ultraviolet light at 395 nm, it demonstrates an impressive internal quantum efficiency of 69.24 % and remarkable thermal stability. Furthermore, a white light-emitting diode device with a CCT of 5111 K and Ra value of 88.5 was fabricated. The results suggest that the prepared phosphor, in combination with a near-ultraviolet (NUV) light-emitting diode (LED) chip, has the potential for application in WLEDs. Finally, in the field of anti-counterfeiting technologies, the Ca2GaNbO6: 0.25Eu3+ phosphor emerges as a promising candidate due to its exceptional properties, indicating its good potential for use in anti-counterfeiting inks.

Thermoluminescence and persistence luminescence of barium aluminate (BaAl2O4) and Eu doped BaAl2O4 phosphors: a preliminary study

Thermoluminescence and persistence luminescence of barium aluminate (BaAl2O4) and Eu doped BaAl2O4 phosphors: a preliminary study

The luminescent behaviors and J-O theory analysis of red phosphor Ca1-xGeO3:xEu3+

The luminescent material Eu3+-doped CaGeO3 has been synthesized using a high-temperature solid-state reaction technique. The crystal structure was analyzed using X-ray diffraction (XRD). The results showed that the samples belonged to the triclinic crystal system with the space group P1̅. The luminescent properties including photoluminescence excitation (PLE), Photoluminescence emission (PL) spectra, and lifetime, thermal stability, and diffuse reflectance spectroscopy (DRS) have been investigated. Under near-ultraviolet excitation at 390 nm, the phosphor emits red light with the highest intensity around 611 nm, which is dominated by the 5D0→7F2 electric dipole transitions. It indicates that Eu3+ is in the inversion center of the crystal. The concentration quenching occurs at about 6 % doping from the concentration-dependent luminescence behavior. The energy transfer mechanism was analyzed to be mainly the energy transfer between neighboring ions. The thermal stability was 82.16 % at 423 K. The chromaticity coordinates are in the red area and the color purity approaches 99 %. Furthermore, the J-O theoretical results are used to confirm the experimental result. It suggests that Ca1-xGeO3:xEu3+ is an effective red luminescent material for illumination and backlight display applications.

Smart sensing property of Eu3+-induced polyelectrolyte nanoaggregates on nitrofuran antibiotics in aqueous environments

Pollution of water with antibiotics is a very serious global issue. So, simple, fast, and ecofriendly detection of such pollutants in aqueous environments has aroused great attention. Several intriguing properties such as narrow emission band, large stokes shift, long luminescence decay time and resistance to photobleaching distinguishes europium-based materials from commonly used fluorophores in biology as a superior optical smart material for applications in diverse fields. Herein, strongly luminescent Eu3+-induced polyelectrolyte nanoaggregates (EINAP) were synthesized and successfully characterized. The biocompatible polysaccharides hyaluronic acid and chitosan are used to disperse organic europium complexes resulting in formation of hybrid nanoaggregates. As synthesized EINAP demonstrated excellent quantum yield (89.29 %) and luminescence lifetime (656 µs). The EINAP also have high sensitivity and low limit of detection with good analytical precision for nitrofuran antibiotics in aqueous environments. The luminescent nano sensor developed in this work could be a novel tool for assessment of antibiotic pollution in the environment. The overall sensing mechanisms for detection of nitrofurans in aqueous environments were found to be the combination of inner filter effect and photoinduced electron transfer respectively.

Microstructural investigation of Au ion-irradiated Eu-doped LaPO4 ceramics and single crystals

Ceramics and single crystals of LaPO4 monazite doped with Eu(III) were irradiated with 14 MeV Au5+ ions at three different fluences. Changes to crystallinity, local coordination environments, and topography were probed using grazing-incidence X-ray diffraction (GIXRD), vertical scanning interferometry (VSI), scanning electron microscopy (SEM), Raman, and luminescence spectroscopy. GIXRD data of the ceramics revealed fluence dependent amorphization. A similar level of amorphization was detected for samples irradiated with 5 × 1013 ions/cm2 and 1 × 1014 ions/cm2, whereas the sample irradiated with the highest fluence of 1 × 1015 ions/cm2 appeared slightly less amorphous. VSI showed clear swelling of entire grains at the highest ion fluence, while more localized damage to grain boundaries was detected for ceramic samples irradiated at the lowest fluence. Single crystal specimens showed no pronounced topography changes following irradiation. SEM images of the ceramic irradiated at the highest fluence showed topological features indicative of grain surface melting. Raman and luminescence data showed a different degree of disorder in polycrystalline vs. single crystal samples. While changes to PO4 vibrational modes were observed in the ceramics, changes were more subtle or not present in the single crystals. The opposite was observed when probing the local Ln-O environment using Eu(III) luminescence, where the larger changes in terms of an elongation of the Eu-O (or La-O) bond and an increasing relative disorder with increasing fluence were observed only for the single crystals. The dissimilar trends observed in irradiated single crystals and ceramics indicate that grain boundary chemistry likely plays a significant role in the radiation response.

Optical temperature-sensitive properties of CaMoO4: Eu3+ phosphors

In this study, CaMoO4: Eu3+ phosphors with molar concentrations of 0.01 %, 0.03 %, and 0.1 % were synthesized via the hydrothermal process. The variable temperature PL spectra demonstrated a pronounced decline in the luminescence of MoO42− with the temperature rising, suggestive of typical thermal quenching behavior, whereas the luminescence of Eu3+ showcased an emerging trend characterized by an initial increase followed by a decline. This phenomenon was attributed to the intensified energy transfer effect from MoO42− to Eu3+ as the temperature increased. The thermal quenching trends between MoO42− and Eu3+ exhibited distinct differences, leading to the acquisition of high relative sensitivity when utilizing the FIR of MoO42− and Eu3+ for temperature sensing. It was found in the experiment that samples with higher Eu3+ doping concentrations exhibited higher Sr. In the CaMoO4: 0.1 % Eu3+ sample, the Sr-max reached 3.19 % K−1 at 303 K, which was an excellent value among inorganic materials. The findings of this paper indicate the potential application of CaMoO4: Eu3+ phosphors for optical thermometry.

Substitution of europium (III) in hydroxyapatite lattice for luminescence applications: Integrating experimental and theoretical insights

Europium(III) (Eu3+/Eu(III)) substitution in the hydroxyapatite (HAp) lattice imparts luminescence properties, enabling its application in diagnostics and bioimaging. Despite numerous experimental studies, there has been a lack of comprehensive discussion on the substitution behavior and local structural stability of Eu3+ within HAp. In this study, experimental and first-principles investigations were integrated to explore and understand the substitution of Eu3+ in HAp. Optimization of various HAp models revealed the dependency of Eu3+ substitution site on the charge compensation mechanism. Eu3+ prefers the Ca(2) site when OH is converted to O and the Ca(1) site in the presence of a Ca vacancy. Phonon calculations showed that temperature influences charge compensation and site preference, favoring OH to O compensation and Eu3+ in Ca(2) at higher temperatures and Ca vacancy and Eu3+ in Ca(1) at lower temperatures. Electronic structure simulations explained that the luminescence in Eu(III)-substituted HAp primarily arises from charge transfer between Eu3+ and O atoms, supported by experimental photoluminescence measurements. Correspondence between simulations and experimental photoluminescence data emphasizes the reliability of the computational approach in this study. The integration of insights from experimental and simulation results enhances the understanding of substitution of Eu3+ in the HAp lattice, providing valuable guidance for designing and optimizing HAp-based luminescent and optical materials.

Luminescence and dosimetry investigations of Eu(III) doped Ca2CeVO6 novel double perovskite

A novel composition of vanadate double perovskite Ca2CeVO6 doped with Eu3+ was successfully synthesized using combustion synthesis, wherein the doping levels of Eu3+ ranged from 1 to 6 mol%. The Rietveld refinement of the powder X-ray diffraction (XRD) data confirmed the orthorhombic structure of the phosphors. Scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDAX) were employed to investigate the surface morphology and elemental distribution in the phosphor, respectively. Under the excitation at 280 nm and 467 nm, the phosphor exhibited strong down-conversion red photoluminescence (PL) emission, attributed to Eu3+ transitions (5D0-7FJ, where J = 0–3) originating from its 4f states. The intensity of PL emission shows increasing trend with increasing doping concentration. However, exceeding the threshold doping concentrations led reduction in PL intensity due to multipolar interaction effects. Additionally, the Eu3+ doped Ca2CeVO6 phosphors were subjected to irradiation with a radioactive 90Sr/90Y beta source to explore their thermoluminescence (TL) properties. Post-irradiation, the phosphors displayed prominent TL glow curves, with the most intense peak at around 94 °C, followed by peaks at 160 °C and 288 °C. The TL intensity of these peaks exhibited a linear dose response within the dose range of 1 Gy–50 Gy. Besides, the TL fading and reproducibility tests showed satisfactory results. Furthermore, Tmax-Tstop experiments revealed the presence of three trap centres within the trap depth range of 0.7–2.1 eV in the Ca2CeVO6:Eu3+ phosphor. Additionally, the glow curve deconvolution (GCD) was employed to determine trapping parameters, providing valuable insights into the TL behaviour of the phosphor. Overall, the results suggest that the novel phosphor under study holds promise for its applications in lighting devices and TL dosimetry (TLD).

Preparation and Judd-Ofelt Analysis of Warm Red Luminescent Eu3+ Complexes for Semiconductor Lasing Devices.

Six novel red photoluminescent Eu3+ complexes with 3-formyl chromone as the primary sensitizer (L) were synthesized using the solution precipitation method. These complexes are [Eu(L3).X] where X is 2H2O (C1), phen (C2), neo (C3), bipy (C4), dmph (C5), and biquno (C6). These complexes were characterized by elemental analysis, EDAX analysis, SEM, FT-IR, thermo-gravimetric analysis (TGA/DTA) and photoluminescence spectra. The transition rates, quantum efficiency, and J-O intensity parameters were calculated using emission data and luminescence decay time (τ). Complexes exhibit a strong emission peak (5D0 → 7F2) of the Eu3+ ion in their luminescence emission spectra in solid and solution states, making them an effective emitter of the red color in OLEDs. The branching ratio of these complexes ranges from 80.67-82.92 in solid and 50.53-62.65 in solution state; CIE color coordinate of complexes falls in the red region. The color purity ranges [CP(%)] values for solid 95.26-97.27% and for solution ranges 85.11-93.43%. Correlated color temperature (CCT) of the complexes (C1-C6) ranged from 2710 to 3049K in the solid state and 1775 to 2450K in the solution state. These complexes are promising red emitters in OLEDs, semiconductors, and leasing devices.

High-efficiency luminescent Eu3+ heavily doped glass prepared from black talc: A promising material for significant applications in W-LED illumination

As a distinguished luminescent matrix, rare earth (RE)-doped glass has garnered considerable attention across lighting, display, laser, and related domains. Nonetheless, the limited luminescent efficiency of such glass imposes constraints on its extensive utilization. In addressing this challenge, we have developed a novel formulation involving heavily Eu3+-doped black talc glass, boasting exceptional optical characteristics. Structural examination has validated the successful synthesis of the parent glass matrix comprising [SiO4] and [AlO4] units. With the escalating of Eu3+ doping concentrations, the glass manifested an upward trend in both density and refractive index. Under the excitation of 393 nm light, the glass exhibited strong red light emission, demonstrating a high internal quantum efficiency (IQE) of up to 84.67 %, surpassing markedly other Eu3+-doped glass variants. Furthermore, even under elevated temperatures reaching 150 °C, the glass retained 86.2 % of its luminescent intensity at room temperature, indicative of superior thermal resilience vis-à-vis alternative glass systems. As a proof-of-concept, we encapsulated a white light-emitting diode (W-LED) assembly employing a 395 nm LED chip, Eu3+-doped glass, BaMgAl10O17:Eu2+ blue phosphor, and Ba2SiO4:Eu2+ green phosphor. The resultant device exhibited favorable chromaticity coordinates (0.3566, 0.3994), boasting a correlated color temperature (CCT) of 4791K and a high color rendering index (CRI) of 91. In summary, this investigation employs black talc ore to synthesize luminescent glass, thereby not only diversifying the application scope of black talc but also augmenting its additional value, while notably enhancing the luminescent efficiency of the glass through heavy Eu3+ doping. Through empirical validation, the significant potential benefits of Eu3+-doped black talc glass in the realm of W-LED lighting were convincingly demonstrated.

Luminescent carbon dots encapsulating in Eu3+ doped gahnite spinel nanocomposite for boosting thermal sensing, advanced level III detection and intelligent anti-counterfeiting applications

The exceptional optical properties of carbon dots (CDs) position them as a highly promising category of multifunctional carbon-based nanomaterials. When hydrothermally prepared CDs are incorporated into europium-doped zinc aluminate ZnAl2O4 nanophosphors (ZAO:Eu3+ NPs) synthesized via ultrasonication method, the resulting CDs@ZAO:Eu3+ nanocomposite (NCs) exhibits a broad excitation band, with a prominent peak at approximately 393 nm, perfectly matching the emission wavelength range (500–750 nm) of near-ultraviolet (n-UV) LED chips. Significantly, the CDs (5 wt %)@ZAO:Eu3+ NCs exhibit a remarkable 12.5 folds enhancement in photoluminescence (PL) intensity compared to ZAO:Eu3+ alone, thanks to the Förster Resonance Energy Transfer (FRET) between CDs and Eu3+ ions. This enhancement in luminescence could stem from the CDs capturing electrons and facilitating energy transfer to the luminescent Eu3+ ions. Utilizing CDs to enhance fluorescence presents a straightforward and eco-friendly approach for boosting luminescence properties. Impressively, even under elevated temperatures reaching 420 K, the thermal stability of CDs (5 wt %)@ZAO:Eu3+ NCs remains outstanding, retaining 90 % of its initial luminescence intensity. This highlights its exceptional thermal stability, characterized by a high activation energy of 0.27 eV. With an impressive internal quantum efficiency (IQE) of 87.01 %, the optimized composite also achieves remarkable colour purity (CP), reaching 99.5 %. The relative sensitivity was 1.36 %, at 300 K. Thus, CDs@ZAO:Eu3+ is a promising material for non-contact optical thermometry applications. Utilizing the optimized NCs through a simple powder dusting technique effectively develops latent fingerprints (LFPs) on various surfaces, revealing fingerprints (FPs) under 365 nm UV light. Additionally, the study investigates diverse pore parameters including number, position, size, shape, and inter-spacing. Furthermore, optimized NCs are utilized to create a transparent anti-counterfeiting (AC) ink, offering effective AC features through its red emission under 365 nm UV light.

Perovskite oxide nanoparticles: Dual role as supports for luminescent Eu(III) ions and photocatalysts for bisphenol degradation

Perovskite oxides, such as CaTiO3, SrTiO3, and BaTiO3, have gained significant recognition for their dual role as luminescence supports and photocatalytic materials. In this study, we synthesized perovskite oxide nanoparticles (NPs) using the thermal calcination method and employed them as photocatalysts for the degradation of bisphenol S (BPS) and bisphenol AF (BPAF) under UVC irradiation. The as-synthesized photocatalysts were thoroughly examined for the photocatalytic degradation process and identified secondary products were identified using liquid chromatography in conjunction with high-resolution mass spectrometry. Our observations highlighted the relatively faster photocatalytic degradation of BPS compared to BPAF. Notably, among the perovskite oxide materials, SrTiO3 exhibited the highest catalytic activity for BPS degradation, while BaTiO3 outperformed in the case of BPAF degradation. Perovskite oxide NPs were also utilized as supports for doping with Eu3+ ions to create phosphor supports. Luminescent emissions from the Eu3+ ions, characterized by the 5D0 → 7FJ = 0-4 transitions, were observed and varied depending on the support material. Notably, Eu3+ doped in CaTiO3 nanoparticles exhibited the highest luminescence efficiency. These results highlight the dual functionality of perovskite oxide-based materials in phosphor applications and photocatalysis, offering valuable insights into their potential for both enhancing luminescence efficiency and treating bisphenols.

Synchrotron radiation excited luminescence of Eu, Er, and Tm codoped β-Ga2O3 thin film

Ga2O3 thin film with Eu, Er, and Tm codoping was prepared on Si substrate by pulsed laser deposition. The obtained codoping film has a monoclinic Ga2O3 structure identified by X-ray diffraction and Raman measurements. The excitation wavelength-dependent photoluminescence measurements were performed using synchrotron radiation sources with photon energies both below and above bandgap. Moreover, temperature-dependent PL measurements were carried out from 30 to 300 K to systematically investigate the PL characteristics of codoped Eu3+, Er3+, Tm3+ ions in the Ga2O3 film. Typical luminescent bands originating from Eu3+, Er3+, and Tm3+ dopants were concurrently observed in the PL spectra. The codoping film emits a near purple light when it was excited at 30 K, which gradually shifts to the orange region as the temperature rises to 300 K. This color evolution results from different quenching rates of Eu3+, Er3+, and Tm3+ dopants with the increase of temperature. These findings provide a solid foundation for Si-compatible full-color displays using RE doped Ga2O3.

Pt(II)‐Phenanthroline‐Ln(III)‐DOTA d–f Hybrids as Small‐Molecule Theranostics

Abstract1,10‐Phenanthroline d‐ or f‐metal complexes can be utilised in biomedical applications such as imaging or therapeutics. Herein, we designed bimetallic d‐block metal‐phenanthroline f‐block metal‐1,4,7,10‐tetraazacyclododecane‐1,4,7,1,0‐tetraacetic acid (DOTA) conjugates as theranostic agents to simultaneously achieve both of these applications. Luminescence studies show the 1,10‐phenanthroline‐Eu(III)‐DOTA complexes displayed an off/on/off pH‐dependent switch, demonstrating their potential as pH‐responsive lanthanide luminescence probes. Relaxometry studies showed that the 1,10‐phenanthroline‐Gd(III)‐DOTA complexes present a r1 of 5.15±0.05 mM−1 s−1 and could thus be used as magnetic resonance (MR) contrast agents. Complexation of Pt(II) by the 1,10‐phenanthroline moiety resulted in quenching of the Eu(III) luminescence, but an enhancement of the Gd(III) relaxivity (r1=7.53±0.69 mM−1 s−1). Cell viability studies of the d–f hybrids in a cancer cell line showed the potential of these complexes as anticancer agents, as the IC50 for the Pt(II)/Gd(III) complex (IC50=24.9 μM) was lower than that of cisplatin (IC50=31.6 μM). As such, Pt(II)‐1,10‐phenanthroline‐Gd(III)‐DOTA complexes are promising theranostic agents for cancer therapy.

Improved luminescence in BA-CaF2: Eu3+ nanoparticles for LSC

CaF2: Eu3+ nanoparticles with different doping concentrations were prepared by a hydrothermal method. The surface of the prepared nanoparticles was modified by 1,2,4,5-benzenetetracarboxylic acid. The structure, morphology, photoluminescence properties, and fluorescence dynamics are studied systemically. The functionalized nanoparticles have a broad excitation band in UV-vis area and high asymmetry radio. The luminescence of Eu3+ ions in CaF2 nanoparticles is improved by 1,2,4,5-benzenetetracarboxylic acid bonded onto the surface of nanoparticles via the energy transfer process. The excited state lifetimes of functionalized nanoparticles are longer than those of un-functionalized nanoparticles. These kinds of materials have the potential to be applied in luminescent solar concentrators.

Enhanced luminescent properties of poly(sodium acrylate)-based composite and its selective interaction towards copper ions

This study investigates the luminescent properties and metal ion interactions of europium when combined with a polymer chain of poly (sodium acrylate) (PSA) and a phenanthroline (Phen) molecule, which acts as an efficient antenna. The study of interactions between lanthanide ions and various compounds in different matrices is crucial, providing valuable insights into the molecular environment, and enabling a deeper understanding of processes affecting their luminescence. In this study, we investigated the luminescent properties of the Eu(PSA)Phen complex and its remarkable capacity for selective interaction with Cu2+ ions in an aqueous solution. From this selective interaction, we conducted a series of detailed studies that provided valuable insights into the mechanisms of luminescence suppression, information about the europium chemical environment, and other related aspects. The luminescence of Eu(PSA)Phen is significantly quenched by Cu2+ ions, driven by both static and dynamic mechanisms. The presence of the PSA polymer chain and Phen molecules within the composite exerts a profound influence on energy transfer processes, enabling selective responses to Cu2+ ions, even in the presence of competing cations. Additionally, we observed a preferential interaction of the PSA molecule in the Eu(PSA)Phen composite with Cu2+ ions over the N groups of phenanthroline. These findings underscore the compound potential as a versatile tool in various fields, ranging from material science to biosensing, where rapid and selective metal ion detection is of paramount importance.